Microstructure and Materials Properties - Inderscience Publishers
Microstructure and Materials Properties - Inderscience Publishers
Microstructure and Materials Properties - Inderscience Publishers
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
International Journal of<br />
<strong>Microstructure</strong> <strong>and</strong><br />
<strong>Materials</strong> <strong>Properties</strong><br />
© 2013 <strong>Inderscience</strong> Enterprises Ltd
Scope of the Journal<br />
The IJMMP publishes contributions on various mechanical, electric, magnetic,<br />
optical, properties of metal, ceramic <strong>and</strong> polymeric materials in terms of the crystal<br />
structure <strong>and</strong> microstructure. Papers treat all aspects of materials, i.e., their<br />
selection, characterisation <strong>and</strong> evaluation in the phase of decision-making in design<br />
<strong>and</strong> manufacturing of a new product. They cover the field of product, design,<br />
improvement of material properties in various production processes. Attention is<br />
also focused on materials from the viewpoint of physical metallurgy. New<br />
technologies, new processes <strong>and</strong> related new materials, mathematical <strong>and</strong> physical<br />
modelling of various processes optimisation <strong>and</strong> control of processes in terms of<br />
microstructural <strong>and</strong> macroscopic material properties are included. Testing <strong>and</strong><br />
characterisation of mechanical <strong>and</strong> physical properties determined with st<strong>and</strong>ard<br />
<strong>and</strong> non-st<strong>and</strong>ard methods are also addressed.<br />
Subject coverage:<br />
• Improvement of materials properties<br />
through various manufacturing processes<br />
• Mechanical <strong>and</strong> physical testing of<br />
materials <strong>and</strong> their characterisation<br />
• Non-destructive testing according to<br />
characterisation of microstructure <strong>and</strong><br />
materials properties<br />
• Surface integrity after mechanical<br />
machining <strong>and</strong> heat treating <strong>and</strong>/or<br />
surface modification<br />
• Creep testing, fatigue testing failure,<br />
analysis <strong>and</strong> fractures of various materials<br />
• Surface characterisation, chemical<br />
analysis <strong>and</strong> microanalysis of the surface<br />
layer<br />
• Precipitation <strong>and</strong> dispersion hardening<br />
• Dislocation interactions <strong>and</strong> strain hardening<br />
• Distortion induced by deformation<br />
• Plastic strain <strong>and</strong> static strength<br />
• Cyclic strain <strong>and</strong> fatigue strength<br />
• Structure formation in deformed metals<br />
<strong>and</strong> alloys<br />
• Analytical representation of creep curves<br />
• Solute strengthening<br />
• Quantitative microscopy<br />
• Heat treatment of metals <strong>and</strong> alloys<br />
• Chemical heat treatment of metals <strong>and</strong><br />
alloys<br />
• Laser surface engineering<br />
• Electron beam surface modification<br />
• Interface between polymers, metals <strong>and</strong><br />
ceramics<br />
• Quenching <strong>and</strong> distortion of steels<br />
• <strong>Materials</strong> with special properties<br />
• Particle size distribution <strong>and</strong> properties<br />
of metals <strong>and</strong> alloys<br />
• Solid/liquid interface morphologies<br />
versus solidification rate<br />
• The influence of the mould/metal<br />
interface on casting or forging quality<br />
• Modeling of microstructure formation of<br />
metals <strong>and</strong> alloys<br />
• Simulation of microstructure evaluation in<br />
metals <strong>and</strong> alloys<br />
• Advanced techniques for characterisation<br />
of electrochemical effect in stress corrosion<br />
cracks<br />
International Journal of<br />
<strong>Microstructure</strong> <strong>and</strong><br />
<strong>Materials</strong> <strong>Properties</strong><br />
www.inderscience.com/ijmmp<br />
visit<br />
www.inderscience.com
Members of the Editorial Board<br />
Editor-in-Chief<br />
Prof. Dr. Janez Grum<br />
University of Ljubljana, Slovenia<br />
Editorial Board<br />
Prof. Dr. Helen V. Atkinson<br />
University of Leicester, UK<br />
Prof. Dr. Charlie R. Brooks<br />
University of Tennessee, USA<br />
Prof. Dr. Lauralice C.F. Canale<br />
Universidade de Sao Paulo, Brazil<br />
Prof. Dr. Horst H. Cerjak<br />
Technical University Graz, Austria<br />
Prof. Dr. Tara Ch<strong>and</strong>ra<br />
University of Wollongong, Australia<br />
Prof. Dr. Rafael Colás<br />
Universidad Autónoma de Nuevo León,<br />
Mexico<br />
Prof. Dr. Narendra B. Dahotre<br />
The University of Tennessee, USA<br />
Prof. Dr. Jeff Th. M. De Hosson<br />
University of Groningen, Netherl<strong>and</strong>s<br />
Dr. Georg Ernst<br />
Joanneum Research Forschungsgesellschaft,<br />
Austria<br />
Prof. Dr. Cemil Hakan Gür<br />
Middle East Technical University, Turkey<br />
Dr. Raimond Grimberg<br />
National Institute of Research <strong>and</strong> Development for<br />
Technical Physics, Romania<br />
Prof. Dr. Mohamed S. Hamed<br />
McMaster University, Canada<br />
Prof. Dr. Bozidar Lisci c´<br />
University of Zagreb, Croatia<br />
Prof. Dr. Xinmin Luo<br />
Jiangsu University,<br />
China<br />
Prof. Dr. José Luis Ocana ˜˜<br />
E.T.S. Ingenieros Industriales (U.P.M.), Spain<br />
Prof. Dr. Tamas Réti<br />
Bánki Donát Polytechnic, Hungary<br />
Prof. Dr. András Roósz<br />
Miskolc University, Hungary<br />
Prof. Dr. Mario Rosso<br />
Politecnico di Torino, Italy<br />
Dr. Valery Rudnev<br />
INDUCTOHEAT Group, USA<br />
Prof. Dr. Berthold Scholtes<br />
Universität Kassel, Germany<br />
Mr. Soren Segerberg<br />
Heattec, Sweden<br />
Prof. Dr. Bozo Smoljan<br />
University of Rijeka, Croatia<br />
Prof. Dr. Miklós Tisza<br />
University of Miskolc, Hungary<br />
Prof. Dr. Jose M. Torralba<br />
Universidad Carlos III de Madrid, Spain<br />
Prof. Dr. Ericsson Torsten<br />
Linköping University, Sweden<br />
Dr. George E. Totten<br />
Portl<strong>and</strong> State University, USA<br />
Mr. George F. V<strong>and</strong>er Voort<br />
Buehler Ltd, USA<br />
Prof. Dr. Rui Vilar<br />
Instituto Superior Técnico, Portugal<br />
Prof. Dr. Leszek Wojnar<br />
Cracow University of Technology, Pol<strong>and</strong><br />
Prof. Dr.-Ing. Hans-Werner Zoch<br />
IWT - Stiftung Institut für Werkstofftechnik,<br />
Germany<br />
Prof. Dr. Pavel Mazal<br />
Brno University of Technology (BUT Brno),<br />
Czech Republic<br />
visit<br />
www.inderscience.com
Methods of payment<br />
Content of Inaugural<br />
Issue of IJMMP<br />
VOL. 1(1), 2005<br />
A note on the effect of temperature on the<br />
friction <strong>and</strong> wear behaviour of carbon-fibrereinforced<br />
Polyetheretherketone (PEEK-<br />
CF30) at dry sliding<br />
J. Paulo Davim, Rosaria Cardoso<br />
<strong>Microstructure</strong> variations in the laser surface<br />
remelted layer of nodular iron<br />
Janez Grum, Roman Sturm<br />
Study of diffusion across PVD-coated cermet<br />
tool/workpiece interface<br />
Mirko Sokovic<br />
Design <strong>and</strong> usage of a simple miniature<br />
specimen test setup for the evaluation of<br />
mechanical properties<br />
G. Partheepan, D.K. Sehgal, R.K. P<strong>and</strong>ey<br />
To be completed by all subscribers<br />
Terms are payment with order. Payment by<br />
cheque, banker’s draft or credit card is<br />
acceptable.<br />
Name of subscriber<br />
............................................................................<br />
...........................................................................<br />
Position ..............................................................<br />
Institution ............................................................<br />
Address ..............................................................<br />
...........................................................................<br />
...........................................................................<br />
...........................................................................<br />
Nondestructive investigation of the effect of<br />
quenching <strong>and</strong> tempering on mediumcarbon<br />
low alloy steels<br />
C. Hakan Gur, B. Orkun Tuncer<br />
Density <strong>and</strong> viscosity of the silicate melts for<br />
the production of the mineral wool fibres<br />
Brane Sirok, Bogdan Blagojevic, Peter Bullen,<br />
Dusan Dimovski<br />
Effect of microstructure on mechanical<br />
behaviour of chilled Pb/Sb/Sn/As Alloy-<br />
Al2SiO5 (Kaolinite) metal matrix composites<br />
Joel Hemanth<br />
The formation of a boronised layer on<br />
aluminised steel <strong>and</strong> surface corrosion<br />
behaviours<br />
Xinmin Luo, Diankai Li, Kangmin Chen<br />
Ultrasonic fatigue life of 40CrNiMoA<br />
(AISI4340) steel <strong>and</strong> its influencing factors<br />
Honghong Shao, Guang Chen, Xinmin Luo<br />
✃<br />
...........................................................................<br />
...........................................................................<br />
...........................................................................<br />
...........................................................................<br />
Fax ......................................................................<br />
E-mail .................................................................<br />
Credit card type <strong>and</strong> number<br />
............................................................................<br />
............................................................................<br />
Expiry date .........................................................<br />
Three-digit security number<br />
(on the reverse of the credit card) ......................<br />
Signature.............................................................<br />
Self-regulated thermal processes during<br />
quenching of steels in liquid media<br />
Nikolai I. Kobasko<br />
Date ....................................................................<br />
Please address subscription orders to the<br />
address overleaf
Subscription order form<br />
To find out the subscription rates for<br />
International Journal of <strong>Microstructure</strong> <strong>and</strong><br />
<strong>Materials</strong> <strong>Properties</strong> (IJMMP),<br />
please go to<br />
www.inderscience.com/ijmmp or<br />
http://www.inderscience.com/subscribe.php<br />
(for all <strong>Inderscience</strong> titles, including IJMMP)<br />
This form may be photocopied or<br />
downloaded from<br />
www.inderscience.com/www/ielsubsform2.pdf<br />
Journals may be ordered online from<br />
http://inderscience.metapress.com<br />
Please address subscription orders to:<br />
<strong>Inderscience</strong> <strong>Publishers</strong> (Order Dept.)<br />
World Trade Centre Building II<br />
29 Route de Pre-Bois,<br />
Case Postale 856,<br />
CH-1215 Genève 15,<br />
SWITZERLAND<br />
For rush orders please:<br />
fax: +41-22-7910885 or<br />
E-mail: editorial@inderscience.com<br />
Please enter the following regular<br />
subscriptions to IJMMP<br />
........ subscriptions (Print or Online)<br />
[delete as necessary]<br />
........ subscriptions (Print <strong>and</strong> Online)<br />
Total cost ..........................................................<br />
✃<br />
What the experts say<br />
about IJMMP<br />
“Before now, the publication of rigorous <strong>and</strong> insightful<br />
thermal process papers has been a highly fragmented<br />
enterprise with contributions spread over many<br />
journals worldwide. Now with IJMMP, it is possible to<br />
follow the most significant advances in materials<br />
science <strong>and</strong> engineering by reading one journal. These<br />
advances involve bulk thermal processing effects <strong>and</strong><br />
surface engineering as well as advances in emerging<br />
technologies. Content includes science <strong>and</strong><br />
engineering of new materials <strong>and</strong> processes, structure<br />
<strong>and</strong> property characterisation, modelling <strong>and</strong> testing<br />
technologies. This is indeed an important new journal.”<br />
Prof. Dr. George E. Totten<br />
Portl<strong>and</strong> State University<br />
Department of Mechanical <strong>and</strong> <strong>Materials</strong><br />
Engineering, Portl<strong>and</strong>, OR, USA<br />
“By following the latest nano, micro <strong>and</strong> macroscopic<br />
techniques for structure analysis of bulk materials as<br />
well as of surface layer properties <strong>and</strong> steadily<br />
developing mathematical modelling software, this new<br />
journal will substantially contribute to deepen the<br />
knowledge in the field of materials science.<br />
Application of this knowledge to different conventional<br />
as well as most modern materials engineering<br />
processes is a special feature of this journal.”<br />
Prof.Dr.Bozidar Liscic´<br />
Former President of International Federation for<br />
Heat Treatment <strong>and</strong> Surface Engineering (IFHTSE),<br />
University of Zabreb, Croatia<br />
Relevant<br />
<strong>Inderscience</strong> Titles<br />
International Journal of Embedded Systems<br />
International Journal of Forensic Engineering<br />
International Journal of Manufacturing<br />
Technology <strong>and</strong> Management<br />
International Journal of <strong>Materials</strong> <strong>and</strong> Product<br />
Technology<br />
International Journal of <strong>Materials</strong> <strong>and</strong> Structural Integrity<br />
International Journal of Nanotechnology<br />
International Journal of Product Development<br />
International Journal of Product Lifecycle Management<br />
International Journal of Reliability <strong>and</strong> Safety<br />
These titles are part of a unique profile on: PRODUCT<br />
DEVELOPMENT, MATERIALS AND MANUFACTURING<br />
Methods of payment overleaf<br />
For information about these titles <strong>and</strong> the<br />
substantial portfolio of journals developed<br />
by <strong>Inderscience</strong>, please visit the website at:<br />
www.inderscience.com
Notes for Authors <strong>and</strong> Submission of Papers<br />
Submitted papers should not have been previously published or be currently under<br />
consideration for publication elsewhere.<br />
All papers are refereed through a double-blind process. A guide for authors <strong>and</strong> other<br />
relevant information for submitting papers are available on the Submission of Papers<br />
section of the <strong>Inderscience</strong> website: please go to<br />
Author Guidelines<br />
(www.inderscience.com/guidelines)<br />
To submit a paper, please go to<br />
Submission of Papers<br />
(http://www.inderscience.com/papers)<br />
For queries concerning the journal, please contact:<br />
Editor-in-Chief,<br />
Prof. Dr. Janez Grum<br />
Faculty of Mechanical Engineering<br />
University of Ljubljana<br />
Askerceva 6, SI-1000 Ljubljana<br />
Slovenia<br />
E-mail: janez.grum@fs.uni-lj.si<br />
with a copy to:<br />
Editorial Office,<br />
E-mail: editorial@inderscience.com<br />
(Please include in your submission the title of the Journal)<br />
© 2013 <strong>Inderscience</strong> Enterprises Ltd<br />
ISSN: 1741-8410 (Print), ISSN: 1741-8429 (Online)
Change language