Dynamic Two-Way Communication - Industronic

INTRON-D Functions
Dynamic Two-Way Communication
Definition
Establishes a communication link on demand with any intercom station via a telephone type numerical
keypad
General
Using the 12 key numerical keypad, all connected stations can be selected individually. Group and all calls
can also be initiated using the keypad.
Description
To establish a connection to another intercom station, the following steps are required:
Enter the station number (e.g. 3).
Press the Talk key *.
If the station is busy, a signal will be heard. If not, the connection will be established.
Hold down the Talk key to speak.
The called station can answer directly by pressing a key *.
Press the Talk key * again to speak. The connection to the most recently called intercom station will
be established again.
Doc. no. FDA-330-001-453 • Rev. 3 • US • 13.12.2010
© INDUSTRONIC 1 / 2
Subject to technical modifications

Initiating an all call or a group call:
Enter the quick-dial number (at least two digits, e.g. 99 for "all call").
Press the Talk key *.
Hold down the Talk key to speak.
Release the Talk key * to disconnect.
Benefits
Establishment of a connection to all intercom stations of a system (every subscriber can talk to all
other subscribers)
Group calls and all calls
Compact intercom station despite many connections
Saving of keypads for stations with many connections
Exclusive connections between two intercom stations (no party line channel!)
Combination with direct connection keys possible
INDUSTRONIC ® Inc.
1011 US Highway 22 West
Suite 301
Bridgewater, NJ 08876, USA
Tel. +1 908 393-5960
Fax: +1 908 393-5961
contact@industronic.com
www.industronic.com
Doc. no. FDA-330-001-453 • Rev. 3 • US • 13.12.2010
© INDUSTRONIC 2 / 2
Subject to technical modifications