Conventional Air Atomising Spray Lances

Conventional Air Atomising Spray Lances 

EXITFLEX ‘38’ Series Airspray Gun Lances do not feature needles and thus require a different technique in use. In practice, 

they provide a positive affordable solution to users where a slim, lightweight extension is required for paint spray or wax 

application into difficult to reach areas inside tubes or confined spaces 

The Lances are 3mm thick wall aluminium tubing as also used with the EXITFLEX airless spray extension items, this makes it 

easy for you to stock for air spray or airless spray applications. 

It is important to note that the atomisers detailed in this section are for use in air spray applications only, they are not suitable 

for airless Some liquids may not be suitable for use with these atomisers. 

It is important to use separate air and fluid control regulators. Pressure feed guns should normally feature a 1.4mm fluid tip, 

or a 1.8mm fluid tip. Extensions will only operate with pressure feed. 

TYPE REF DESCRIPTION 

38-441 Fogging chamber to fit BRPHVLP gun (page 45) 

38-451 Fogging chamber to fit Iwata W90 

38-452 Fogging chamber to fit Iwata W200 

38-411 Fogging chamber to fit DeVilbiss, Sagola (not HVLP) 

38-438 Fogging chamber to fit DeVilbiss, Compact Gun 

38-421 Fogging chamber to fit Binks 230 

38-431 Fogging chamber to fit Binks BBR 

38-471 Fogging chamber (air assisted airless)to fit AAG-2000, 

GRACO AA 2000, ALPHA PLUS & AA PLUS 

74-021 Adaptor for use with Flexi, 1/2” JIC M x 1/2” JIC M 

38-002 Adaptor 1/2” JIC M 1/4” UNF F for use in rigid extensions 

38-210 Spinning atomiser, forward, backward and side spray 1/4” UNF 

38-220 Spinning atomiser, side spray only 1/4” UNF 

38-230 Fixed atomiser for use with flexi lance 

32-306/16 Lance 6” length rigid 





A complete extension comprises 1 Fogging chamber, 1 Lance (length to suit) 1 38-002 adaptor 

plus/antomiser of your choice. These extensions require a pressure feed system. 

Flexible Extensions - 

PA131J230 Flexi lance 1 metre including 38-230 fixed atomiser (excl. fogging chamber) 

Flexible extensions are available using the 38-219 or 220 spinning 

atomiser with 1/4 bore nylon hose. Prices by enquiry 

Slimline Extensions - 

38-500 Slimline extension tube only not including nozzle. Accepts 38-210 

or 38-220 order fogging chamber extra to suit. Nickel plated finish 

18” long, 11mm OD 

38-501 Slimline angled fixed fan atomiser complete with fogging chamber 

to suit and choice of 6”, 12” or 18” length. 11mm OD 

38-002 

38-230 

PA131J230 

38-220 

38-210 

It is important to ensure a balanced air and fluid pressure “at the spray gun”. 

To assist in achieving this it is advisable to use a mini air regulator - or filter 

regulator please see page 9. 

Standard 12” extension 

for DeVilbiss JGA/GTi 

spray gun with forward, 

backward & side spray 

360° atomiser nozzle.

Airless Spray Lances 

Flow Gun 

✔ 350 Bar (5,000 psi) max inlet pressure 

✔ fluid inlet connection 1/4 NSP(M) 

✔ weight: 500 grams 

Airless Flow Gun - model 880-355 suitable for application of grease, sealers and various 

products of high viscosity. Normaly used with extrusion pumps up to 350 Bar MWP. Trigger 

guard fitted as standard. 

880-355 Flow Gun 

Pole Guns 

✔ 210 Bar (3,000 psi) max inlet pressure 

✔ fluid inlet connection 1/4 NPS(M) 

Airless Pole Guns - suitable for many kinds of paint products. Trigger 

guard included. Needle extended up to an adjustable position housing, 

11/16”UNF connection to accept 88-457 Mk IV tip housing. 

PG-300 Pole Gun 3000mm 


PG-180 * Pole Gun 1800mm 

PG-150 * Pole Gun 1500mm 




* Stock, others to order

Airless Spray Lances 

NO. TYPE REF DESCRIPTION 

1 32-050/2 Universal connector 

2 36-202/43 Nut 7/8 - 14 UNF Graco 

2 36-203/30 Nut 3/8 - 18 NPS DeVilbiss, Kremlin 

2 36-204/30 Nut 3/4 - 20 UNF Binks 

2 36-205/30 M 18 x 1 Atlas Copco 

2 36-207/43 Nut 11/16 - 16 UNEF Wagner, Aro 

3 32-002/17 Directional w/filter housing 7/8 UNF 

3 32-007/17 Directional w/filter housing 11/16 UNF 

4 32-102/17 Straight filter housing 7/8 UNF 

4 32-107/17 Straight filter housing 11/16 UNF 

5 36-020-K10 Disc filter 30 mesh. Pack of 10 

5 36-009-K10 Disc filter 60 mesh. Pack of 10 

5 36-005-K10 Disc filter 100 mesh.Pack of 10 

5 36-003-K10 Disc filter 200 mesh Pack of 10 

6 32-132/27 Straight adaptor 7/8 UNF 

6 32-137/27 Straight adaptor 11/16 UNF 

7 21-008/46 Seal 

8 32-306/16 Lance 6 inches 

9 32-312/16 Lance 12 inches 

10 32-318/16 Lance 18 inches 

11 32-324/16 Lance 24 inches 

12 32-336/16 Lance 36 inches 

13 38-004 Nylon plug seal (use in place of filter for speedy MKV) 

Directional filter housing & 

Speedy MkV (page 54) 

12” extrension on SP90 

airless gun (page 40) with 

directional filter housing & 

Speedy MkV (page 39).

BIG INDUSTRIAL WIPES 

PROFESSIONAL 

BIW-640 

Tray of 8 tubs of 80 wipes

General Consumables 

GW30BK 

Textile overbraid sleeving (Polyester) 25-30mm 

GW40GR 

Textile overbraid sleeving (Polyester) 40-60mm 

PVCT 2/400 PVC sleeve 2” (50mm) approx 200m roll 

PVCT 3/400 PVC sleeve 3” (75mm) approx 200m roll 

000000 Spray gun lubricant 

Suitable for lubricating spray guns, pumps etc. 

This is a non silicone oil for safe use with spray equipment 

50ml bottle with nozzle 

DCL-K50 

DCM-K50 

Coveralls - pack size 50 

Superior non-woven cloth like fabric, soft yet strong. 

• Water repellent • Abrasion resistant - low lint 

• Elasticated wrist, ankle and hood 

• Reusable • Zippered front 

Large 

Medium 

N40-K50 Green disposable Gloves - pack size 50 

Latex, abrasive resistant gloves, offering protection for the 

hands, suitable for use with paints and inks. 

Not suitable for continuous immersion in aggressive solvents. 

Universal visor covers 

to suit square or round edge visors 

UVC-K10 Pack 10 

UVC-K50 Pack 50

------------------------------------------------------------------------------------------------------------------------------------- 

FOR PREPARATION AND MIXING OF LIQUID MATERIALS 

The PM 60 pneumatic agitator is perfect for preparation and 

mixing of most paints in containers of 5 and 10 litre capacity. 

Some materials, such as lacquer may also be agitated in 

larger volume containers. 

Air Driven 

Paint Agitators 

Standard Features 

• Comfortable Handle 

• Can be hand-held/flange mounted 

• or on 60-100 stand 

• Light Weight 

• High Quality Function 

• Stainless Steel Shaft & Propeller 

• Long Service Life 

• Integral Speed Control & silencer 

60-200 flange mounting 

connection also available 

Technical Data 

• Air pressure for operation 0.5 to 8 BAR 

• Speed @ 4BAR = 900RPM 

• Air consumption = 100 L/min 

• Output = 60 Watts 

• Weight (excluding stand) = 1.10kg 

• Shaft length = 440mm 

• Propeller Diameter = 70mm 

PM60 pictured on adjustable height stand 

(60-100) 

The MRM-050 features a 0.42HP direct drive air motor for 

greater mixing ability either for heavier materials or in larger 

quantities up to 25-litre capacity. 


• Comfortable “T” Bar Handle Grip 

Can be hand-held 

• Light Weight 

• High Quality Function 

• Long Service Life 

• Integral Speed Control & silencer 


• Operating Air Pressure 0.5 to 5.6BAR 

• Speed @ 5.6BAR = 6,000RPM 

• Air consumption = 12.5CFM @ 5.6BAR 

• Output = 0.33kW 


• Shaft length = 500mm 

• Spiral Paddle Diameter = 80mm 

80mm spiral paddle 

-------------------------------------------------------------------------------------------------------------------------------------- 

Exitflex (UK) Ltd 5 Airfield Road Airfield Industrial Estate 

Christchurch Dorset BH23 3TG United Kingdom 

Tel: +44 (0) 1202 478334 Fax: +44 (0) 1202 488110 

Order Online: www.exitflex.co.uk 

Top Quality - Best Results

Mixing Tanks 

PM60 -250 

The 60-250 package makes the preparation and use of spray 

applied materials simple and clean to handle whilst at the same 

time helps to ensure that your material achieves and remains at 

the correct specification - ready for use 

It comprises a standard industrial 25 litre pail with stainless steel 

lid, which fastens to the pail using three external fixings. 

The lid itself is spun and laser profiled has a filler/viewer point 

with pear shaped access plate, a 1/2BSP male connection fluid 

suction tube (reaching the bottom of the pail) and a PM-60 

pneumatic mixer. 


• Light weight 

• High quality function 

• Stainless steel shaft & propeller 

• Long service life 

• Integral speed control & silencer 


• Air pressure for operation 0.5 to 8Bar 

• Speed @ 4 Bar = 900RPM 

• Air consumption = 100L/min 

• Output = 60 Watts 


• Standard shaft length = 440mm 

• Propeller diameter = 70mm 

PM60-250 

Pail mounted Agitator Assy 

Exitflex now design manufacture and supply stainless 

steel mixing tanks to meet your exact specifications. 

Supplied with pneumatic operation mixers, filers/viewers, 

bottom outlet ball valve connections. 

100 litre model 

Please alow us the opportunity 

to quote against your mixing 

vessel requirements. 

45 litre model

Pressure Feed Equipment 

1/3 is enough for us... 

You will discover the ingenious simplicity when you maintain the 

pump. We use approximatley 1/3 the number of parts that our 

competitors use to build similar sized pumps. 

2 

Exitflex are pleased to offer an extensive 

range of double diaphragum pumps for 

transfer duty 

1.Flexible installations 

The connections may be rotated 180°. Simply turn the 

connections to fit your piping system.Threaded BSP or 

NPT connections is standard. Twin connectons are 

also avaiable 

2.Powerful valve seats 

The valve seat is under constant stress from the 

movement of the valve ball. To obtain best wear 

resistance, the integrated seat is made from AISI 316 

stainles steel. 

3 

3.Low air consumption 

The air distribution system is designed with shortest 

possible air distribution ways. This eliminates “dead 

spaces”, resulting in high effiencey and low air 

consumption. 

Typical applications 

Industry 

Workshop 

Print & paint 

Mining & Construction 

Ceramic Industry 

Chemistry 

1 

Example of applications 

Oil, fat, solvents, water, cooling fluid, lubricants 

Glue, additives, varnish, ink, paint, latex, acid, resins, pigments 

Adhesives, sump, dewatering, coal, sludge, pastes 

Abrasives, glaze, water, enamels, clay 

Acids, alkalis, alcohol, solvents, latex, emulsions 

Please telephone we 

will be pleased to offer 

a quotation to match 

your specification. 

EPT2.5 

• Quick release lid clamp, saving time and reducing build up of materials 

• Carrying handle/hook 

• Suitable for conventional and HVLP applications 

• Lid mounted pressure release valve 

• Greater manoeuvrability abtained by operative compared with suction / gravity fed systems 

• 5 Bar (70psi) maximum working pressure 

• 3/8 BSP male fluid outlet connection 

• 1/4 BSP male air inlet connection 

With a 2.5 litre cup and a maximum working pressure of 5 Bar 

the EPT2.5 reduces the need for repetitive cup filling and 

allows the spraying of lighter viscosity materials compared 

with cup guns. 

ETP2.5 

ETP2.5K 

Cup Assy (no hoses) 

Cup Assy c/w 4ft hose

Pressure Feed Equipment 

Durable construction pressure 

vessels supplied ready for use, 

with high quality valves, 

regulators and gauges there is a 

choice of manual or pneumatic 

mixing units. 

10 litre 

MODEL AGITATOR TYPE 

ETP10 None Stainless steel version available 

ETP10M Manual 

ETP10A Pneumatic 

ETP10B None - bottom outlet 

20 litre 

MODEL AGITATOR TYPE 

EPT20A Pneumatic Stainless steel version available 

EPT20M Manual 

Other sizes by enquiry 

NB. All 10 litre models feature an aluminium inner liner 

as standard - stainless steel also available (see below). 

A comprehensive stock of spare parts is available. 

Key components are:- 

MODEL 

PTP103 

PTP118 

PTP119 

PTP112 

PTP126 

PTP123 

AGITATOR TYPE 

10 litre lid gasket 

10 litre aluminium liner 

10 litre stainles steel liner 

10 or 20 litre pressure gauge 

10 or 20 litre pressure regulator 

20 litre lid gasket

AAG-2000 Manual Air Assisted Airless Spray Gun 

✔ 240 Bar MWP 

✔ accepts TRI-A reversible kit 

✔ 2 finger trigger 

✔ fluid inlet filter included 

✔ CE marked 

✔ 1/4 BSP air & fluid connection 

AAG-2000 illustrated 

with TRI-A system 

AAG-2000 Models 

TYPE REF 

DESCRIPTION 

AAG-2000 AAG-2000 manual air assisted airless spray gun 240 Bar MWP 1/4 BSP male 

air & fluid connection, complete with disc tip housing & screen (excl spray tip) 

supplied with standard air cap - order TRI-A separately if required. 

Spare parts for AAG-2000 spray guns 

TYPE REF DESCRIPTION TYPE REF DESCRIPTION 

96-401 Air cap retaining ring 

96-418 Fan regulator 

96-401A Air cap retaining ring TRI-A 

96-419 Valve cap 

96-402 Air cap (standard) 

96-420 Spring 

63-560/15 “AG” mixair tip (state size) 

96-421 Air valve 

63-562 Tip gasket 

96-422 Packing nut 

96-404 O ring 

96-423 Valve packing 

96-405 Air diffuser 

96-424 Fluid gasket 

96-406 Needle seat 

96-425 Fluid connector 

96-406/2000 Needle seat 

96-426 Fluid tube 

96-407/2000 Needle 

96-410/2000 Bush 

36-XXX-K10 Disc tip filter (Pack 10) 

(See page 19 for choice of screens) 

96-411/2000 Valve shaft 

96-428 Trigger 

96-412 Nut (x2) 

96-429 Air inlet connection 

96-413 Washer (x2) 

96-430 Disc tip filter housing 

96-414 Trigger pin

TRI-A Auto 

✔ 140 Bar MWP (2000psi) 

✔ accepts TRI-A reversible kit 

✔ 1/4 BSP fluid connection 

✔ CE marked 

TRI-A Spray Gun Models 

TYPE REF 

DESCRIPTION 

83-600 AUTOMATIC TRI-A AIR ASSISTED AIRLESS SPRAY GUN 140 Bar MWP 

(2000psi). Includes a mounting base with air and fluid fittings and connections. 

Compact and durable. Teflon packings and stainless steel fluid passages. 

Accepts TRI-A 83-005 reversible nozzle system (not included as standard) 

The TRI-A air assisted airless spray gun in association with the TRI-A reversable 

spray tip system is suitable for use in demanding industrial applications. 

The features of the gun and air cap/nozzle combination provide many benefits to the 

user; reduced down-time due to reversible cleaning nozzles and ease of servicing, 

compact, durable anodised body, superb atomisation and fan control. TwinTips also 

available giving 2 angles back-to-back from 1 tip key. 

Pos. Ref Description 

3 83-603 Head 

4 83-604 Needle Packing Kit 

5 83-605 Air Valve Kit 

6 83-606 Body 

7 83-607 Fluid Inlet Connection Body 

10 83-610 Air Inlet Base Control 

11 83-611 Air Piston Assembly 

12 83-612 Piston Spring 

13 83-613 Cylinder Cap 

14 83-614 Needle Spring 

15 83-615 Needle Adjuster Assembly 

Pos. Ref Description 

22 83-403 Air Cap Separation Gasket 

83-000 Repair Kit 

Comprising: 

3 x ‘O’ Rings ref 3b) 

1 x ‘O’ Ring (ref 11a) 

1 x ‘O’ Ring (ref 11b) 

1 x Piston Spring (83-612) 

1 x Needle Spring (83-614) 

6 x ‘O’ Rings (ref 10a) 

1 x Air Cap Separation Gasket (83-403)

TRI-A Air Assisted Airless Spray Gun 

✔ reversible AAA 



✔ CE marked 

✔ disc tip filter built into fluid 

tube 

✔ 1/4 BSP fluid inlet connection 

✔ 1/4 BSP air inlet connection 

✔ manual & automatic guns 

83-001 TRI-A illustrated with 

reversible aircap & tip 

TRI-A Spray Gun Models 


83-001 MANUAL TRI-A AIR ASSISTED AIRLESS SPRAY GUN 140 Bar MWP (2000psi). Two 

air chambers, MWP 140 Bar. 1/4 BSP air & fluid inlets. Colour blue. 

(excludes air cap & tip) 

Spare parts for TRI-A manual spray guns (83-001) 

TYPE REF DESCRIPTION TYPE REF DESCRIPTION 

83-401 Aircap retaining ring 83-417 Air valve plug 

83-402 Friction ring (PTFE) 83-418 Air valve spring 

83-010 TRI-A air cap base 83-419 Air valve packing 

83-011 TRI-A swiveling seal assembly 83-420 Air valve opening bar 

83-012/23 K10 Nylon gasket for 83-011 (pk10) 83-421 O ring (green viton) 

83-013 TRI-A ball tip & seal kit(state size) 83-422 Air valve body 

83-015 TRI-A ball tip (state size) 83-433 Air/needle valve needle packing 

83-403 Air cap separation gasket. 83-434 Flat washer 3x7x0.5 zinc plated 

83-405 Body / nozzle holder 83-435 Air valve packing spring 

83-406 PTFE packing 83-436 Air valve packing nut 

83-407 Needle packing set (complete) 83-437 Trigger lock lever and screw 

83-408 Packing nut 83-439 Air inlet connection 1/4 BSP male 

83-409 Head cone gasket 83-440 Air control valve (complete) 

83-410 Trigger pin screw 83-441 Trigger 

83-411 Fluid needle (complete) 83-442 Filter housing (without filter) 

83-412 Fan control adjuster (complete) 36-005-K10 Disc tip filter (pack 10) See page 31 

83-413 O ring (green viton) 83-443 Fluid inlet connection 1/4 NPS 

83-414 Fluid needle spring 83-444-K10 Nylon cleaning brush (pack 10) 

83-415 Base for fluid needle spring 83-445 Seals & springs kit (pos.2,6,9,12,23, 

83-416 Fluid control adjusting valve 25,29,30,32,34,35,36) 

183-510 Dismantling wrench 

For TRI-A Aircaps and Tips, see pages 67.

Air Spray Guns 

TYPE REF 

DESCRIPTION 

BRP HVLP Pressure feed. 

19710 BRP HVLP Manual spray gun @ 1.0mm 

19712 Pressure feed @ 1.2 






BRP HVLP 

spray gun 

fitted with 

VOW type twin 

hose & 

stainless steel 

76 series 

reusable 

connections 

(page 6) 

BRP HVLP Spares 

202XX Needle, fluid tip & air cap kit(replace XX with Ø) 

1825XA Air cap (state size ie, 0.8mm - 2.2mm) 

18345A Seals and springs repair kit 

1828XA Fluid tip (state size ie 0.8mm) 

1625XA Fluid needle (state size ie 0.8mm) 

24097-R-K10 Pack 10 cleaning brushes 

10638A 1000cc Camlock Suction Cup 

HVLP Automatic Spray Gun (Low Pressure) 

K99 

Automatic HVLP spray gun. Stainless 

steel version with recirculation base. 

Sizes 0.7 – 2.2mm (please specify) 

K99 

Turbine Spray Gun 

TPQ-98 

HVLP turbine gun. High quality, non bleed 

Air Blow Guns 

30100 Airblow gun with aluminium body 

30130 Airblow gun with booster nozzle. 

Aluminium body 

30130 

30100 

TPQ-98 

Cleaning Gun 

DG-10-EK 

Manual cleaning gun, syphons from separate container 

adjustable output 1/4 BSP air outlet 

DG-10-EK 

Gravity spraygun 

E-70 Heavy material spray gun 4mm nozzle. One litre 

aluminium gravity cup. 1/4 BSP air inlet 

E-70

AP20 Automatic Airless Spray Gun 

The AP-20 automatic airless 

spray gun is made from 316 

stainless steel, wetted. 

Designed for continuous use on 

automatic stations up to 345 

Bar MWP 

AP-20 Stainless steel 

automatic airless spray gun 

illustrated with standard flat tip 

(not included) 

✔ compact design (107 x 39 x 65mm) 

✔ 345 Bar MWP (5,000psi) 

✔ 316 stainless steel (wetted) 

✔ 1/4 BSP(F) fluid inlets 

AP20 Models 


20-500 AP-20 automatic airless spray gun 345 Bar rated. Single 1/4 NPS male fluid connection 

20-550 AP-20 automatic airless spray gun 345 Bar rated. 2 x 1/4 NPS male fluid connections for recirculation 

Spare parts for AP20 spray guns 

POS. REF DESCRIPTION POS. REF DESCRIPTION 

1 92-001 Nozzle 63-505 9 92-009 Packing screw 

2 21-008 Nozzle Packing 10 92-010 Needle assembly 

3 92-003 Seat 11 92-011 Piston disc 

4 92-004 Nozzle nut 12 92-012 Nut M5 

5 92-005 Gun body 13 92-013 Spring 

6 92-006 Washer 14 92-014 O ring 

7 92-007 Oil seal 15 92-015 Needle packing set 

8 92-008 Cap nut 16 92-016 Air seal 

Diffuser thread M18 x 1 accepts 88-555 speedy V or 88-455 speedy IV

AP81 Automatic Airless Spray Gun 


✔ CE marked 

81-500 illustrated with 88-457 Speedy MkIV - see page 38 

The AP81 automatic airless spray 

gun is designed for continuous use 

on automatic stations with high 

pressure airless spraying pumps 

and feature a diffuser tip, pneumatic 

operation, a flat tip guard as 

standard. 

AP81 Models 

TYPE REF 

DESCRIPTION 

81-500 AP81 automatic airless spray gun 250 Bar rated. Single 1/4 NPS male fluid connection incl speedy and tip 

81-510 AP81 gun only (excl tip and base) 

Spare Parts for AP81 spray guns 


1 81-401 Guard and nut 9 81-414 ‘O’ ring 

3 81-404 Fluid tip diffuser 10 81-415 Lip seal 

4 81-405 Needle 11 81-416 Piston 

18 81-406 Gasket 12 81-417 ‘O’ ring 

17 81-407 Nipple 13 81-418 Lip seal 

19 81-408 Locking screw 14 81-419 Lock nut 

20 81-409 Push in fitting 15 81-420 Gun spring 

6 81-411 Pressure washer 16 81-421 Cylinder screw cap 

7 81-412 Needle packing seal 21 81421/A Ring 

8 81-413 Packing screw 

Diffuser thread 11/16 unf - accepts 88-557 speedy V or 88-457 speedy IV

SP90 Manual Airless Spray Gun 



✔ gun handle filter (included) 

✔ CE marked 

✔ swivel fluid inlet 

✔ choice of 1/4 NPS / 1/4 BSP 

or M16 fluid inlet connection 

SP90 illustrated with 88-557 Speedy 

MkV (rated 517 Bar) - see page 54 

SP 90 Models 


90-500/00 SP90 manual spray gun 500 Bar rated. 1/4 NPSM male fluid connection inc speedy + tip 11/16 x 16 

90-501/00 SP90 manual spray gun 500 Bar rated. M16x1.5 male fluid connection inc speedy + tip 11/16 x 16 

90-502/00 SP90 manual spray gun 500 Bar rated. 1/4 BSP male fluid connection inc speedy + tip 11/16 x 16 

90-530 SP90 manual spray gun 500 Bar rated. 1/4 NPSM male fluid connection inc speedy + tip 7/8 x 14 

Spare parts for SP90 spray guns 


1 90-401 Guard and nut assembly 14 90-414 Handle gasket 

4 90-404/2 Fluid tip diffuser 7/8 x 14 15 90-415 Handle 

4 90-404/7 Fluid tip diffuser 11/16 x 16 17 90-417 Filter spring 

5 90-405 Guard 18 90-418 Gasket 

6 90-406 Needle 19 90-419 Swivel 1/4 NPS 

7 90-407 Needle packing seal 20 90-420 Swivel M16 x 1.5 

8 90-408 Pressure washer 21 90-421 Swivel 1/4 BSP 

9 90-409 Needle packing screw 22 90-422 Trigger assembly 

10 90-410 Cylinder 23 90-423 Trigger lock assembly 

11 90-411 Locking nut 24 90-424 Trigger pin and nut 

12 90-412 Gun spring 90-430 Needle repair kit (90-406/408/409/411) 

13 90-413 Spring cap 90-300 Repair kit

SP91 Manual Lightweight Airless Spray Gun 



✔ ultra lightweight (425g) 

✔ CE marked 

✔ swivel fluid inlet 

✔ trigger guard 

✔ 1/4 BSP fluid inlet connection 

SP91 illustrated with Speedy MkIV 

(rated 400 Bar) - see page 53 

SP91 Models 


91-700 SP91 manual spray gun 350 Bar rated. 1/4 BSP male fluid connection inc speedy + tip 

Spare parts for SP91 spray guns 


3 91-703 Trigger guard 15 91-715 Pusher pin (x2) 

5 91-705 Fluid tip diffuser 16 91-716 U packing 

5-1 91-705-1 O ring 17 91-717 Swivel connection 1/4 BSP 

6 91-706 Needle 18 91-718 Trigger pin 

7 91-707 End cap 19 91-719 Hex. Cap nut (x2) 

8 91-708 Pusher 20 91-720 Set screw 

10 91-710 Packing retainer 21 91-721 O ring 

11 91-711 Packing case 22 91-722 Back up ring T2 

13 91-713 Trigger assembly 23 91-723 Spanner 

14 91-714 Spring 

Diffuser thread M18 x 1.5 accepts 88.-556 speedy V or 88-456 speedy IV

Accessories 

Aluminiun Non Restrictor Models 

Low Pressure Aluminiun Restrictor Models 

TYPE REF 2 INLETS 1 OUTLET TYPE REF 2 INLETS 1 OUTLET 

74-911/27 1/4 BSP(M) 1/4 BSP(F) 74-711/27 1/4 BSP(M) 1/4 BSP(F) 

74-922/27 1/4 NPS(M) 1/4 NPS(F) 74-722/27 1/4 NPS(M) 1/4 NPS(F) 

74-941/27 * 1/4 BPS(M) 3/8 BSP(F) 74-741/27 * 1/4 BSP(M) 3/8 BSP(F) 

74-944/27 * 3/8 BSP(M) 3/8 BSP(F) 74-744/27 * 3/8 BSP(M) 3/8 BSP(F) 


74-981/27 1/4 BSP(M) M16 x 1.5(F) 74-781/27 1/4 BSP(M) M16 x 1.5(F) 

74-988/27 M16 x 1.5(M) M16 x 1.5(F) 74-788/27 M16 x 1.5(M) M16 x 1.5(F) 

Non Restrictor Models Stainless steel 

Low Pressure Stainless Restrictor Models 

TYPE REF 2 INLETS 1 OUTLET TYPE REF 2 INLETS 1 OUTLET 


74-822/30 1/4 NPS(M) 1/4 NPS(F) * 74-522/30 1/4 NPS(M) 1/4 NPS(F) 

74-841/30 1/4 BSP(M) 3/8 BSP(F) 74-541/30 1/4 BSP(M) 3/8 BSP(F) * 




74-888/30 M16 x 1.5(M) M16 x 1.5(F) * 74-588/30 M16 x 1.5(M) M16 x 1.5(F) 

* Stock lines others to order 

LP Y Blocks 

74-330 LP 2 outlet air connector Y with ball valves 1/4 BSP(F) x 2 x 1/4 BSP(M) 

74-301.4 LP 3 outlet fluid Y connection, swivel nut 3/8 BSP(F)x3 x 3/8 BSP fixed 

incl 1 x 3/8 BSP plug

Conventional Air Atomising Spray Lances

Create successful ePaper yourself

Delete template?

Save as template?