- LED lighting set for ROCO Aln 442 TEE- Mounting instructions ...
- LED lighting set for ROCO Aln 442 TEE- Mounting instructions ...
- LED lighting set for ROCO Aln 442 TEE- Mounting instructions ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
C – Special <strong>instructions</strong> when using a Decoder<br />
When mounting a decoder, in order to control the inner <strong>lighting</strong>, the board must be connected<br />
to the corresponding decoder cables and a function decoder will be needed in the motorless<br />
car.<br />
When mounting a sound decoder it may be necessary to separate the part of the board bearing<br />
the first <strong>LED</strong> to free the room <strong>for</strong> the loudspeaker. The cut off part may be reused by shifting<br />
it <strong>for</strong>ward and connecting it to the main part of the board with cables. The necessary<br />
connecting pads are provided on the board.<br />
Copyright Jorns Modellbeleuchtung Page 4/4