Visual IVF - Indal

Visual IVF-Components
1
2
3
4
5
Body
Formed by a cover and a fixing base, hinged among themselves, and
with a stop at the end, the body is made of a high pressure die-cast
injected aluminium alloy L-2521. After manufacturing, a chromatized
treatment and a polyester paint finish in three possible colour
combinations is done:
• Cover painted in grey RAL 7035 and base in grey Galet (Akzo nobel).
• Cover painted in blue Horn and base in blue Petrol (Akzo nobel).
• Cover and base painted in grey RAL 7035.
Closing system
The blocking of the cover with the base is done without tools, by means
of an only rear closing clip in extruded and anodized aluminium.
Fixing system
The luminaire is fixed to the bracket or column by means of a clamp in
treated steel and stainless steel screws.
Tilting system
A die-cast aluminium piece is incorporated allowing tiltings at 0-3-6 or
9° when column mounted.
Embellishing cover
The fixing and tilting systems are hidden in the interior of the base using
a thermoplastic black cover.
7
8
9
10
reflector and the glass by means of a computerized silicone deposit.
Lampholder housing
Made of thermoplastic material with two stainless steel clips to be fixed
to the reflector. Relamping without tools is possible. Both a horizontal
and vertical regulation system is available for lamp focusing allowing a
slight adaptation of the photometric distribution.
Control gear tray
Available in two versions, depending on electric class:
• Galvanised steel (Class I)
• Polyamide reinforced with glass fiber (Class II)
Control gear
A compact type called Indalblock®, it incorporates a conventional
ballast with a thermal protection, an independent type or direct pulse
electronic ignitor, as well as the correction capacitor in a single set. All
the hidden cable between these three elements is also incorporated and
it finishes in a single connection terminal block.
Disconnection switch when opened (only for the Class II version)
Formed by an insulating polyamide support with electrical connections
of the Faston F6 type together with a body in polyester reinforced with
glass fiber.
6
Optical system
Formed by a hydroformed reflector in 99,85% pure aluminium, gloss
anodized finish, and a 4 mm thick engraved flat tempered glass. The IP-
66 high protection index of the optical system is achieved sealing the
IP-66 (optical system)
1
IK 09
road lighitng
5
4
6
3
1
2
9
7
8
10
8
Electric class I
Electric class II
3