SOLARWATT Glass-Glass Solar Modules

SOLARWATT
Glass-Glass Solar Modules
SOLARWATT Glass-Glass Solar Modules were developed and optimized for the universal use
on buildings. Due to the frameless construction and the semi-transparency the modules are
especially suitable for roof-integrations, shading systems, vitrifications, canopies, facades and
on-roof installations.
SOLARWATT M135-55 GEG LK
The modules manufactured in Glass-Glass Lamination Technology
have an extremly high mechanical stability and are therefore very
resistant against environmental influences.
monocrystalline solar cell
with 16 - 17% efficiency,
125 x 125 mm
1520
710
SOLARWATT AG
Maria-Reiche-Straße 2a
01109 Dresden, Germany
Tel. +49 (0) 3 51 / 88 95-0
Fax +49 (0) 3 51 / 88 95-111
www.solarwatt.de
info@solarwatt.de
Certified acc. to:
DIN EN ISO 9001 and 14001

SOLARWATT Solar modules M135-55 GEG LK
are noted for:
Efficient, low-loss energy production
Certified materials and quality of workmanship
25 years warranty to power output according to SOLARWATT’s Limited Warranty Conditions
Subject to change without notice. 2007/08
Specification
Nominal Power P max
@ STC*
typ. Nominal Voltage U mpp
@ STC*
typ. Nominal Current I mpp
@ STC*
typ. Open Circuit Voltage U OC
@ STC*
typ. Short Circuit Current I SC
@ STC*
Off-load voltage rating
NOCT **
typ. Nominal Power P max
@ NOCT**
typ. Nominal Voltage U mpp
@ NOCT**
typ. Open Circuit Voltage U OC
@ NOCT**
typ. Short Circuit Current I SC
@ NOCT**
Module efficiency reduction at 200 W/m 2 ***
typ. Temperature Coefficient of P N
typ. Temperature Coefficient of U oc
typ. Temperature Coefficient of I SC
Max. System Voltage
IP protection level
Reverse current power rating I R
****
Module Technology
Module Design
No. and Type of Solar Cells
Cables
Bypass-Diodes
Dimensions (LxWxH)
Weight
Operating Temperature Range
Ambiente Temperature Range
Mechanical ratings
Qualifications
Measuring tolerances
M135-55 GEG LK
125 W p
130 W p
135 W p
27,3 V 27,4 V 27,5 V
4,63 A 4,81 A 5,01 A
33,7 V 33,7 V 33,8 V
5,02 A 5,28 A 5,49 A
33,7 V 33,7 V 33,8 V
45 ° C
90 W p
94 W p
97 W p
24,1 V 24,2 V 24,3 V
30,5 V 30,5 V 30,6 V
4,04 A 4,25 A 4,42 A
-0,1 % -0,1% -0,0 %
-0,50 %/K
-0,37 %/K
+0,03 %/K
1000 V
IP 65
15 A
Glass-Glass-Laminate
Cover material: high transparent solar glass (tempered), 4 mm
Encapsulation: EVA-Solar Cells -EVA
Back material: tempered float glass, 4 mm
55 monocrystalline solar cells, 125 x 125 mm
connection buttons with 2 x 1 m solar cable, 1 x 4 mm 2 with Tyco plug connectors, casted in the button
3 pieces, casted at the connection buttons
1520 x 710 x 9 mm
25 kg
-40 ... +45 °C
-40 ... +80 °C
suction pressure of 2400 Pa approved (Wind speed 130 km/h with safety factor 3),
load of 5.400 Pa approved
IEC 61215 Ed. 2 in preperation Safety Class II ( IEC 61730 in preparation )
P max
@ STC ± 5%, all other electric parameters ± 10%
This data sheet conforms to DIN EN 50380:2003
* STC: Standard Test Conditions, measurement conditions: Radiation strength 1000 W/m 2 , spectral distribution AM 1.5, temperature 252 °C, in accordance with EN 60904-3
** NOCT: Normal Operation Cell Temperature, measurement conditions: Radiation strength 800 W/m 2 , AM 1.5, temperature 20 °C, wind speed 1m/s, electrical open-circuit operation
*** Reduction in the module efficiency with reduction in radiation strength of 1000 W/m 2 , to 200 W/m 2 , temperature 25 °C, in accordance with EN 60904-1
**** Reverse current power rating: Operation of the modules with an external power source is only permitted with a string fuse with a release current of < 3 x ISC @ NOCT**