Power Wire Brushes - Pferd

Power Wire Brushes
Unthreaded Crimped Wheel Brushes
High performance, general purpose wheel for
bench and pedestal machines. Use for edge
blending, flash removal, cleaning, removing
paint, rust and corrosion, roughening, matte
finishing, and light deburring work.
Economy line features untempered wire with a
lower fill density than the Quality line.
Bench Wheels
d 2
l 2
d 1
Recommendation for Use
Suitable power tool: bench grinders, stationary
machines, flexible shafts.
EDP 81445
b
Ordering Note
8” and 10” diameter medium face bench
wheels include 1/2” x 1/4” keyway.
See page 65 for listing of adapters.
PFERD Specification Number
RBU
Diameter
d 1
[Inches]
Arbor
Hole
d 2
[Inches]
Trim
Length
l 2
[Inches]
Face
Width
b
[Inches]
Width
on Arbor
[Inches]
Wire Diameter and EDP Number
Quality Line
Economy Line
.008 .014 .008 .014
Recom.
Speed
[RPM]
MSFS
Max
[RPM]
Adapter
Style
Carbon Steel Wire - Standard Face (Solid Centre)
4 1/2, 3/8 3/4 1/2 13/32 81442 81443 81420 P 81421 P 6,000 - 9,000 12,500 D 2/5
6 5/8, 1/2 1-1/8 5/8 1/2 81444 81445 81422 P 81423 P 4,000 - 6,000 8,000 D 2/5
7 5/8 1-7/16 19/32 1/2 81446 81447 81424 P 81425 P 3,500 - 5,500 7,500 - 2/5
8 1-1/4, 1, 3/4, 5/8 1-13/16 3/4 15/32 81448 81449 81426 P 81427 P 3,000 - 4,500 6,000 A 2/5
10 1-1/4, 1, 3/4 1-7/8 1 13/16 - 81450 - - 2,000 - 3,000 4,200 A 2
Carbon Steel Wire - Medium Face (Adapter Style)
6 2 1-1/8 29/32 15/16 81456 P 81457 P 81432 P 81433 P 3,000 - 4,500 6,000 C 1/5
7 2 1-5/16 31/32 15/16 81458 81459 P 81434 P 81435 P 3,000 - 4,500 6,000 C 1/5
8 2 1-1/2 1-1/8 15/16 81460 P 81461 P 81436 P 81437 P 2,000 - 3,000 4,500 C 1/5
10 2 1-7/8 1-1/8 1 - 81462 - - 1,500 - 2,500 3,600 C 1
EZmount crimped wire wheel eliminates
mounting problems commonly found with
other bench brushes. It`s designed with a flat
side profile that matches all mounting flanges
on pedestal and bench grinders for a correct fit.
Easy installation takes seconds. The telescoping
bushing is self-sizing and makes full width
contact to prevent the brush from falling into
spindle threads.
Recommendation for Use
For use on bench grinders.
Ordering Note
Includes adapter set “E”.
See page 65 for adapter information.
PFERD Specification Number
RBU T
EZmount Bench Wheels
d 2
l 2
d 1
EDP 81478
b
208
Diameter
d 1
[Inches]
Arbor
Hole
d 2
[Inches]
Trim
Length
l 2
[Inches]
Face
Width
b
[Inches]
Width
on Arbor
[Inches]
Wire Diameter and EDP Number
.008 .014
Recom.
Speed
[RPM]
MSFS
Max
[RPM]
Adapter
Style
Carbon Steel Wire
6 2, 1, 3/4, 5/8, 1/2 7/8 7/8 3/4 81473 81474 P 3,000 - 4,500 6,000 E 1/5
8 2, 1, 3/4, 5/8 7/8 7/8 3/4 81477 P 81478 P 2,000 - 3,000 4,500 E 1/5
10 2, 1, 3/4 2-1/4 7/8 3/4 - 81480 1,500 - 2,500 3,600 E 1
Brushes available in POP
packaging are marked with a
“P” in this catalogue. To order
brushes in POP versions, please
add a “P” to the end of the
EDP number.
The minimum order quantity of POP items is
printed in “blue” accordingly.
CATALOGUE
208 I
PAGE
19