ertex solar - VSG-print modules - Photovoltaik

downloaded from www.photovoltaik-web.de
ertex VSG - print module
Energy advantage with the adequate visual impression
Glass enamelled coating
Enamel as a porous print or on the complete surface
Laminated safety glass technology
Age resistant glass - glass cell encapsulation
Selectable light transparency
For rearventilated exterior lagging
Can be combined with facade systems
Harmonised architectural appearance
Several colours available for one module
25 years of performance guarantee
5 years of product guarantee
Production of customised forms possible
Sizes up to 2.000 x 4.000 mm
ertex VSG - print modules are setup for facades, parapet and overhead glazings where the transparency
and appearance are important. The enamelled porous print or the complete coating of the rearside of the
module glass plate make special architectural requirements possible.
The ertex VSG - print modules consist of mono- or polycrystalline silicon solar cells encapsulated in an ageresistant
PVB sheet (Polyvinylbutyral) between two tempered glass plates (ESG). The frontside consists of a
highly transparent white glass and guarantees high light transmission. The rearside is coated with an age
resistant enamel which is stoved at 600 °C in the glass. The electrical junctions of the module are lined along
the faceside of the glass.
The PVB sheet guarantees the same mechanical and reliable features as the over decades well established
laminated safety glass.
ertex VSG - print modules are break-through safe and suitable for overhead glazing.
VSG - print modules can be customised with a size of 2.000 x 4.000 mm.
Applications
Colour design of the PV facades
Shading elements
Architectural design
Layout
Frontside: ESG-white glass
Cell type poly- or monocrystalline solar cells, type 156 x 156 mm
Cell embedding: PVB-lamination (Polyvinylbutyral)
Rearside: ESG-Glass with enamelled coating
Junctions: Junction box along the glass edge with connection assembly and 4 mm² junction cable appropiate
to the module width

downloaded from www.photovoltaik-web.de
Current-voltage characteristics
for VSG-P 260
Temperature coefficients
Open circuit voltage U oc : -0,32 %/K
Output P mpp : -0,43 %/K
Short circuit current I sc : +0,03 %/K
Max. values
Operating temperature -40 bis +85°C
Wind velocity: 135 km/h
Max. system voltage: 1000 V
Dimensions
for VSG-P 260 (in mm)

downloaded from www.photovoltaik-web.de
Standard sizes
Type / Identification VSG-P 260VSG-P 350
Rated output P mpp for 1000 W/m²260 W p 350 W p
Rated output P mpp for 700 W/m² 184 W p 245 W p
Rated output P mpp for 500 W/m² 131 W p 175 W p
Cells per module 72 pcs. 96 pcs.
Glass thickness 2 x 4 mm 2 x 4 mm
Rated voltage U mpp 35,60 V 47,47 V
Rated current I mpp 7,33 A 7,33 A
Open circuit voltageU OC 44,43 V 59,24 V
Short circuit currentI OC 7,81 A 7,81 A
Dimensions of the laminate (frameless)
Height 1987 mm 1987 mm
Width 1011 mm 1333 mm
Weight 44 kg 58 kg
Type / Identification VSG-P 405VSG-P 435
Rated output P mpp for 1000 W/m²405 W p 435 W p
Rated output P mpp for 700 W/m² 286 W p 306 W p
Rated output P mpp for 500 W/m² 204 W p 219 W p
Cells per module 112 pcs. 120 pcs.
Glass thickness 2 x 4 mm 2 x 5 mm
Rated voltage U mpp 55,38 V 59,33 V
Rated current I mpp 7,33 A 7,33 A
Open circuit voltageU OC 69,11 V 74,05 V
Short circuit currentI OC 7,81 A 7,81 A
Dimensions of the laminate (frameless)
Height 2309 mm 1987 mm
Width 1333 mm 1655 mm
Weight 67 kg 88 kg
Type / Identification VSG-P 465VSG-P 505
Rated output P mpp for 1000 W/m²465 W p 505 W p
Rated output P mpp for 700 W/m² 326 W p 357 W p
Rated output P mpp for 500 W/m² 233 W p 255 W p
Cells per module 128 pcs. 140 pcs.
Glass thickness 2 x 5 mm 2 x 5 mm
Rated voltage U mpp 63,29 V 69,22 V
Rated current I mpp 7,33 A 7,33 A
Open circuit voltageU OC 78,99 V 86,39 V
Short circuit currentI OC 7,81 A 7,81 A
Dimensions of the laminate (frameless)
Height 2631 mm 2309 mm
Width 1333 mm 1655 mm
Weight 95 kg 103 kg
Type / Identification VSG-P 580
Rated output P mpp for 1000 W/m²580 W p
Rated output P mpp for 700 W/m² 408 W p
Rated output P mpp for 500 W/m² 292 W p
Cells per module
160 pcs.
Glass thickness
2 x 5 mm
Rated voltage U mpp 79,11 V
Rated current I mpp 7,33 A
Open circuit voltageU OC
98,73 V
Short circuit currentI OC
7,81 A
Dimensions of the laminate (frameless)
Height
2631 mm
Width
1655 mm
Weight
117 kg
At STC (AM 1,5; 1000 W/m²; 25 °C); power output data ±3 %