Catalog - All Pages | Nexxus Lighting [PDF] - Wiedamark

Catalog Volume 1.0
T E C H N I C A L S P E C I F I C AT I O N S C 21
SVL300
.5”
(12.6 mm)
Light Sticks
4” (101.6 mm)
Fiber Optic Cable
ACRYLIC WAND
PVC stake for
in-ground installation
4” (101.6 mm)
1 2
3 4
PLAN VIEW
2"
concrete surface
fiber optic cable
light source
CUTAWAY
INSTALLATION
SIDE VIEW
Light Stick Installation Guide
1. Place light sticks firmly into the ground
with the fiber optics attached and the
coupler assembled. The top of the light
stick should extend 2” above the final
concrete grade.
2. Pour the concrete.
3. Finish the concrete.
4. When the concrete has set, cut the light
stick flush at the concrete surface with a
saw or a grinder. Use a sander to produce
a smooth finish on the light stick.
SPECIFICATION FEATURES
Construction
Fixture Construction
Acrylic rod and pvc base and stake. Fibertight connector secures fiber optic cable in fixture.
Cabling
A Light Stick can accommodate up to 12 fibers.
WARRANTY
Two year warranty on all parts and workmanship
ORDERING INFORMATION
LIGHT STICK
SVL300 1 Acrylic wand, pvc body
SVC40 Saw
ENDGLOW CABLES
(Order separately for individual Light Sticks)
SV4EG
SV8EG
SV12EG
4 fibers
8 fibers
12 fibers
©2006 Super Vision International. All Rights Reserved