Catalog - All Pages | Nexxus Lighting [PDF] - Wiedamark

Catalog Volume 1.0
T E C H N I C A L S P E C I F I C AT I O N S C 23
Light Paver
SVPAVER4X4
1. Thread the fibertight connector into the paver by
rotating the paver around it.
2. Place the pavers firmly into the ground with the
fiber optics attached and the coupler assembled.
Lay bricks around the pavers.
3. Chisel out a notch in each paver that lays over the
fibertight connector for the fiber optic cables.
4. Lay the chiseled brick over the fiber optic cable
and connect the cable to a illuminator after the
pavement is complete.
4"
101mm
4"
101mm
STEP 1 STEP 2
3.5"
89mm
brick
STEP 3
brick
notch for fiber optics
STEP 4
paver brick
fiber optic cable
sand / gravel bed
SPECIFICATION FEATURES
Installation Guide
Construction
Polycarbonate top and white ABS translucent base. Fibertight connector secures fiber optic cable in fixture.
Cabling
The 4’ x 4’ paver can accommodate up to 25 fibers.
WARRANTY
Two year warranty on all parts and workmanship
ORDERING INFORMATION
PAVER LIGHT
ENDGLOW CABLES (Order separately)
SVPAVER4X4
Inground paver light
Poly carbonate top and ABS base
SV8EG
SV12EG
SV25EG
8 fibers
12 fibers
25 fibers
©2006 Super Vision International. All Rights Reserved