AUTOMOTIVE Contents - Gibb Tools

182
AUTOMOTIVE
Contents
Page
BOTTLE JACKS 183
AXLE STANDS 183
TROLLEY JACKS 184
AIR JACKS 186
RATCHET JACKS 187
SCISSOR JACKS 187
TRANSMISSION JACKS 188
JACKING BEAMS 188
CAR RAMPS 189
ENGINE STANDS 189
CRANES 189
CHAIN BLOCKS 190
HOISTS 191
BENCH PRESSES 191
FLOOR PRESSES 192
CLEANING TANKS 193
SHOT BLASTING 194
ENGINE CLEANING & SEALING 196
AIR PUMPS & GAUGES 197
SPRAY GUNS 198
MASKING PAPER 200
PAINT DRYERS 200
BATTERY EQUIPMENT 200
TOW ROPES & BRACES 205
PULLERS 206
TIE DOWNS 206
TARPAULINS 206
INSPECTION LAMPS 207
WARNING LIGHTS 208
DOOR TOOLS 208
WINDSCREEN TOOLS 209
BRAKE ADJUSTMENT TOOLS 210
FLARING TOOL 211
TUBE BENDERS 212
HOSE TOOLS 212
BRAKE SPRING TOOLS 212
BRAKE FLUID EQUIPMENT 213
Page
INSTALLATION TOOLS 214
COOLING SYSTEM TOOLS 215
SEAL & COLLET INSTALLERS 217
VALVE GRINDING 217
VALVE SPRING COMPRESSORS 218
SPARK PLUG TOOLS 219
PISTON RING TOOLS 220
CYLINDER HONES 220
COMPRESSION TESTING 221
ENGINE SETTING & LOCKING 222
FUEL TIMING & ADJUSTING 230
IGNITION TIMING 231
FAULT READERS & TESTERS 231
OIL FILTER TOOLS 233
EXHAUST TOOLS 234
BALL JOINT TOOLS 235
COIL SPRING COMPRESSORS 236
PULLERS 237
BEARING SEPARATORS 239
COLLET EXTRACTORS 242
PANEL BEATING 242
BODY REPAIR KITS 247
CLAMPS & PULLERS 248
SHEET METAL TOOLS 249
GREASE GUNS 251
OIL GUNS 252
GREASE FILLING SYSTEMS 253
FUNNELS 254
LIQUID STORAGE 254
OILERS, SPRAYERS, PUMPS 256
OIL DRUM ACCESSORIES 258
INSPECTION MIRRORS 259
RETRIEVING TOOLS 260
MAGNIFIERS 260
HOOK & PICK SETS 260
PARTS TRAYS 261
MAGNETS 261

BOTTLE JACKS/AXLE STANDS 183
Sealey Axle Stands CONTINUED >
AS 15000 Axle Stands
Stock No Min Height Max Height Price
332600 482 mm 787 mm 287.96
Capacity (each) 15 Tonnes
(pair) 30 Tonnes
AS 4000H Axle Stands. High Lift
Stock No Min Height Max Height Price
332610 1180 mm 1830 mm 239.96
Capacity (each) 4 Tonnes
(pair) 8 Tonnes
Hydraulic Bottle Jacks
Draper Brand. Large stable base, notched saddle and
overload protection system. Supplied complete with twopiece
handle.
Standard Lift Bottle Jacks. High quality.
Manufactured to GS/TUV specifications.
Stock No Capacity Lifting Range Price
331330 2 Tonnes 181-345 mm 15.92
331335 4 Tonnes 194-372 mm 21.90
331340 6 Tonnes 216-413 mm 26.76
331345 12 Tonnes 230-465 mm 43.64
331347 20 Tonnes 242-452 mm 61.11
High Lift Bottle Jack. Professional quality, ideal for
body shop or workshop. Two stage ram.
Stock No Capacity Lifting Range Price
331349 12 Tonnes 230-555 mm 92.11
Axle Stands
Draper brand. Manufactured to BSAU 223 specification.
Made from carbon steel with hardened steel pin.
Stock No Min Height Max Height Price
331352 310 mm 520 mm 36.92
Capacity (each) 2 Tonnes
(pair) 4 Tonnes
Ratchet Axle Stands
Draper brand. Manufactured to BSAU 223 specification.
Large saddle, 38x85 mm.
Stock No Min Height Max Height Price
331354 280 mm 405 mm 19.73
Capacity (each) 2 Tonnes
(pair) 4 Tonnes
Viking Hydraulic Bottle Jacks
Viking brand is synonymous with quality, reliability and
value. Manufactured in the EEC. All steel, one piece base,
reservoir and pump cylinder design for added strength.
Fitted with safety overload valve. Supplied complete with
zinc coated handle.
Standard Lift Bottle Jacks
Stock No Capacity Lifting Range Price
332400 2 Tonnes 160-308 mm 39.96
332410 3 Tonnes 170-340 mm 52.76
332420 5 Tonnes 212-437 mm 68.76
332430 8 Tonnes 219-444 mm 75.96
332440 10 Tonnes 219-444 mm 87.96
332450 12 Tonnes 228-453 mm 95.96
332460 15 Tonnes 230-455 mm 115.16
332470 20 Tonnes 240-465 mm 147.96
332480 30 Tonnes 242-467 mm 223.96
Telescopic Bottle Jacks. Telescopic hydraulic
ram allows greater lifting range.
Stock No Capacity Lifting Range Price
332490 2 Tonnes 145-360 mm 107.16
332500 5 Tonnes 215-515 mm 207.96
332510 8 Tonnes 235-551 mm 239.96
332520 12 Tonnes 245-571 mm 279.96
332530 20 Tonnes 180-385 mm 343.96
Sealey Axle Stands
Manufactured in the UK to rigorous safety standards in
NATO approved factories. All steel construction with full
width V-crutch for safe support of load. Supplied in pairs.
AS 3000 Axle Stands. Medium Lift
Stock No Min Height Max Height Price
332540 503 mm 758 mm 51.96
Capacity (each) 2.5 Tonnes
(pair) 5 Tonnes
AS 5000 Axle Stands
Stock No Min Height Max Height Price
332550 403 mm 530 mm 59.96
Capacity (each) 5 Tonnes
(pair) 10 Tonnes
AS 5000M Axle Stands. Medium Lift
Stock No Min Height Max Height Price
332560 457 mm 735 mm 71.96
Capacity (each) 5 Tonnes
(pair) 10 Tonnes
AS 7500 Axle Stands
Stock No Min Height Max Height Price
332570 482 mm 787 mm 119.96
Capacity (each) 7.5 Tonnes
(pair) 15 Tonnes
AS 10000 Axle Stands
Stock No Min Height Max Height Price
332580 482 mm 787 mm 159.96
Capacity (each) 10 Tonnes
(pair) 20 Tonnes
AS 12000 Axle Stands
Stock No Min Height Max Height Price
332590 482 mm 787 mm 207.96
Capacity (each) 12 Tonnes
(pair) 20 Tonnes
CONTINUED >
Sealey Ratchet Axle Stands
Ratchet type axle stands with cast iron support posts. All
except VS 12000 feature angled teeth in post which prevent
accidental release of load; the more weight applied,
the tighter the post is locked. Heavy duty model VS 12000
features a double locking pin for added safety. All have
tough steel plate welded bases.
VS 2002 Axle Stands. Manufactured to GS/TUV
specification
Stock No Min Height Max Height Price
332620 265 mm 420 mm 19.96
Capacity (each) 2 Tonnes
(pair) 4 Tonnes
VS 2003 Axle Stands. Manufactured to GS/TUV
specification
Stock No Min Height Max Height Price
332630 290 mm 425 mm 25.56
Capacity (each) 3 Tonnes
(pair) 6 Tonnes
CONTINUED >

184
AXLE STANDS/TROLLEY JACKS
Sealey Ratchet Axle Stands CONTINUED > Viking Trolley Jacks CONTINUED >
VS 6000 Axle Stands
Stock No Min Height Max Height Price
332640 311 mm 470 mm 79.96
Capacity (each) 6 Tonnes
(pair) 12 Tonnes
VS 12000 Axle Stands
Stock No Min Height Max Height Price
332650 482 mm 762 mm 175.96
Capacity (each) 12 Tonnes
(pair) 24 Tonnes
Folding Axle Stands
Draper brand. Manufactured to BSAU 223 specification.
Made from carbon steel with hardened steel pin. Folds
flat for ease of storage.
Stock No Min Height Max Height Price
331356 240 mm 365 mm 16.16
Capacity (each) 2 Tonnes
(pair) 4 Tonnes
Viking Trolley Jacks
Hobby trolley jacks. Steel chassis. One piece hydraulic
unit. Fitted with safety overload valve. Supplied with one
piece pumping handle.
1050 CX Trolley Jack. With integral carry handle.
Stock No Capacity Length Price
332660 2 Tonnes 470 mm 34.36
Min Saddle Height 130 mm
Max Saddle Height 350 mm
Max Chassis Height 130 mm
Weight 11 kg
1100 CXD Trolley Jack. For serious hobby use.
Supplied in a tough plastic carrying case.
Stock No Capacity Length Price
332670 2 Tonnes 535 mm 43.96
Min Saddle Height 135 mm
Max Saddle Height 375 mm
Max Chassis Height 130 mm
Weight 14 kg
CONTINUED >
1150 CX Trolley Jack. Portable, long chassis garage
jack for serious hobby use. Full width pump bracket and
heavy duty one piece hydraulic unit.
Stock No Capacity Length Price
332680 2 Tonnes 647 mm 59.16
Min Saddle Height 130 mm
Max Saddle Height 390 mm
Max Chassis Height 129 mm
Weight 19 kg
1153 CX Trolley Jack. Portable, high capacity, long
chassis garage jack for serious hobby and vehicle
recovery use. Tough pump bracket and heavy duty one
piece hydraulic unit.
Stock No Capacity Length Price
332690 3 Tonnes 625 mm 63.96
Min Saddle Height 130 mm
Max Saddle Height 410 mm
Max Chassis Height 135 mm
Weight 21 kg
Sealey Workshop Trolley Jacks
For professional workshop and tyre shop. Features
include
• Heavy duty chassis with strengthening flanges
• Large sized saddle to aid positioning under vehicle
• Safety overload valve
• Single piece hydraulic unit
• Pump-through valve that prevents handle locking at
maximum ram extension
• Integral American type release mechanism
• Long two piece handle
2080 CX Trolley Jack
Stock No Capacity Length Price
332700 2.25 Tonnes 640 mm 112.45
Min Saddle Height 118 mm
Max Saddle Height 475 mm
Max Chassis Height 155 mm
Weight 33 kg
3080 CX Trolley Jack
Stock No Capacity Length Price
332705 3 Tonnes 675 mm 134.95
Min Saddle Height 120 mm
Max Saddle Height 485 mm
Max Chassis Height 155 mm
Weight 38 kg
Stock No 332715
Low Entry Trolley Jack
Heavy duty jack for workshop use. Features include
• Profiled lifting arm with low clearance height
• Heavy duty chassis with strengthening flanges
• Large sized saddle to aid positioning under vehicle
• Safety overload valve
• Single piece hydraulic unit
• Pump-through valve that prevents handle locking at
maximum ram extension
• Integral release mechanism prevents unintended
lowering of the saddle
3001 LE Trolley Jack
Stock No Capacity Length Price
332710 3 Tonnes 675 mm 159.96
Min Saddle Height 95 mm
Max Saddle Height 480 mm
Max Chassis Height 155 mm
Weight 41 kg
Trolley Jack With Super Rocket Lift
Heavy duty jack for workshop use. Features include
• Rocket lift brings lifting arm into contact with jacking
point with single pump of the handle.
• Heavy base design
• Integral saddle pad provides protection for jacking
point
• Single piece hydraulic unit
• Integral American type release mechanism
• Heavy duty castor wheels
• Two piece handle
3003 CXQ Trolley Jack
Stock No Capacity Length Price
332715 3 Tonnes 690 mm 151.96
Min Saddle Height 145 mm
Max Saddle Height 504 mm
Max Chassis Height 163 mm
Weight 37 kg

TROLLEY JACKS 185
High Lift Trolley Jack
Professional jack for workshop use. Features include
• High lift jack for vehicles with high ground clearance
• Long chassis configuration provides nearly two
metres of access
• Suitable for loading and unloading body shop
alignment jigs
• Single piece hydraulic unit
• CE approved
2150 HL Trolley Jack
Stock No Capacity Length Price
332720 1.5 Tonnes 810 mm 319.96
Min Saddle Height 139 mm
Max Saddle Height 810 mm
Max Chassis Height 170 mm
Weight 58 kg
Heavy Lift Trolley Jacks CONTINUED >
TJ10 Trolley Jack
Stock No Capacity Length Price
332735 10 Tonnes 1600 mm 879.96
Min Saddle Height 195 mm
Max Saddle Height 575 mm
Max Chassis Height 260 mm
Weight 112 kg
TJ15 Trolley Jack
Stock No Capacity Length Price
332740 15 Tonnes 1845 mm 1399.96
Min Saddle Height 180 mm
Max Saddle Height 575 mm
Max Chassis Height 255 mm
Weight 160 kg
20CT Trolley Jack
Stock No Capacity Length Price
332745 20 Tonnes 1780 mm 1999.96
Min Saddle Height 225 mm
Max Saddle Height 600 mm
Max Chassis Height 325 mm
Weight 149 kg
Premier Viking Low Entry Trolley Jack
The Premier Viking brand is synonymous with quality,
reliability and value. Buy Viking and invest in years of
trouble free performance. All jacks are safety tested to
25% overload prior to the overload device being set at
rated capacity. Features of this jack include
• Unique overhead parallel linkage allows very low
minimum access height
• Space saving combination hydraulic unit reduces
maximum chassis height
• Heavy duty steel chassis
• Ergonomic handle design
• Smooth running composite wheels improve
manoeuvrability
• Preferred jack of the professional tyre shop
• Two year guarantee
2001 Trolley Jack
Stock No Capacity Length Price
332755 2 Tonnes 660 mm 314.95
Min Saddle Height 80 mm
Max Saddle Height 500 mm
Max Chassis Height 160 mm
Weight 30 kg
Heavy Lift Trolley Jacks
Professional, heavy lift jacks designed for the fleet or
agricultural user. Features include
• Quick lift foot pedal
• Heavy duty chassis
• One piece hydraulic unit
• Twist lock safety mechanism prevents unintended
lowering of the saddle
• Safety overload device
• Fully CE approved for workshop applications
• Fitted with T handle
TJ3 Trolley Jack
Stock No Capacity Length Price
332725 3 Tonnes 1220 mm 415.00
Min Saddle Height 145 mm
Max Saddle Height 525 mm
Max Chassis Height 190 mm
Weight 52 kg
TJ5 Trolley Jack
Stock No Capacity Length Price
332730 5 Tonnes 1300 mm 639.95
Min Saddle Height 195 mm
Max Saddle Height 575 mm
Max Chassis Height 220 mm
Weight 82 kg
CONTINUED >
Heavy Lift, High Lift Trolley Jack
Viking brand, professional, heavy lift jack. Features
include
• High lift jack for vehicles with high ground clearance
• Heavy duty construction
• Wider chassis for added stability
• Single piece hydraulic unit
• Suitable for loading and unloading body shop
alignment jigs
• Integral safety release mechanism
• Fitted with T handle
7500 Trolley Jack
Stock No Capacity Length Price
332750 7.5 Tonnes 1735 mm 1429.95
Min Saddle Height 180 mm
Max Saddle Height 960 mm
Max Chassis Height 390 mm
Weight 154 kg
Stock No 332760
Premier Viking Low Entry, High Lift
Trolley Jacks
The Premier Viking brand is synonymous with quality,
reliability and value. Buy Viking and invest in years of
trouble free performance. All jacks are safety tested to
25% overload prior to the overload device being set at
rated capacity. Features include
• Unique overhead parallel linkage allows very low
minimum access height
• Space saving combination hydraulic unit reduces
maximum chassis height
• Heavy duty steel chassis
• Wide wheelbase provides inherent stability
• Ergonomic handle design
• Smooth running composite wheels improve
manoeuvrability
• Quick lift foot pedal
• Suitable for loading and unloading body shop
alignment jigs
• Preferred jack of the professional tyre shop for sports
and off-road vehicles
• Two year guarantee
1301 HL Trolley Jack
Stock No Capacity Length Price
332760 1.3 Tonnes 940 mm 595.00
Min Saddle Height 80 mm
Max Saddle Height 740 mm
Max Chassis Height 160 mm
Weight 39 kg
CONTINUED >

186
TROLLEY JACKS/AIR JACKS
Premier Viking Low Entry, High Lift Trolley Jacks CONTINUED > Premier Viking Low Entry High Lift Trolley Jack CONTINUED >
2001 HL Trolley Jack
Stock No Capacity Length Price
332765 2 Tonnes 950 mm 820.00
Min Saddle Height 80 mm
Max Saddle Height 795 mm
Max Chassis Height 220 mm
Weight 45 kg
4002 SLE Trolley Jack
Stock No Capacity Length Price
332775 4 Tonnes 800 mm 995.00
Min Saddle Height 140 mm
Max Saddle Height 605 mm
Max Chassis Height 240 mm
Weight 90 kg
6002 SLE Trolley Jack
Stock No Capacity Length Price
332780 6 Tonnes 800 mm 1250.00
Min Saddle Height 140 mm
Max Saddle Height 600 mm
Max Chassis Height 240 mm
Weight 95 kg
1002 SLE Trolley Jack
Stock No Capacity Length Price
332785 10 Tonnes 805 mm 1539.95
Min Saddle Height 150 mm
Max Saddle Height 585 mm
Max Chassis Height 260 mm
Weight 120 kg
Cross Beam Adaptor
Provides extra safety when locating awkward jacking
points. Ideal for front wheel drive vehicles. Includes rubber
covered saddles. Fits 2080 CX and 3080 CX trolley jacks.
Stock No Capacity Screw Adjustment Price
332805 2 Tonnes 75 mm 59.96
Premier Viking Low Entry High Lift
Trolley Jack
Rubber Jack Pads
The Premier Viking brand is synonymous with quality,
reliability and value. Buy Viking and invest in years of
trouble free performance. All jacks are safety tested to
25% overload prior to the overload device being set at
rated capacity. Features include
• Low minimum saddle height suited to skirted vehicles
• Heavy duty steel chassis
• Wide wheelbase provides inherent stability
• Ergonomic handle design
• Smooth running composite wheels improve
manoeuvrability
• Optional rubber positioning wheels
• Integral release mechanism aids jack arm control
• Suitable for loading and unloading body shop
alignment jigs
• High lift jack, perfect for 4x4 and other high ground
clearance vehicles
• Two year guarantee
5001 HL Trolley Jack
Stock No Capacity Length Price
332770 5 Tonnes 1290 mm 1750.00
Min Saddle Height 140 mm
Max Saddle Height 975 mm
Max Chassis Height 265 mm
Weight 165 kg
Premier Viking Short Chassis Low Entry
Trolley Jacks
The Premier Viking brand is synonymous with quality,
reliability and value. Buy Viking and invest in years of
trouble free performance. All jacks are safety tested to
25% overload prior to the overload device being set at
rated capacity. Features include
• Heavy lift capability
• Ultra short chassis configuration
• Low minimum saddle height
• Ergonomic handle design
• Double action safety release mechanism prevents
inadvertent lowering of the saddle
• Quick lift foot pedal
• Two year guarantee
CONTINUED >
Premier Viking Heavy Lift Trolley Jack
The Premier Viking brand is synonymous with quality,
reliability and value. Buy Viking and invest in years of
trouble free performance. All jacks are safety tested to
25% overload prior to the overload device being set at
rated capacity. Features include
• Heavy lift capability
• Fitted with T handle
• Double action safety release mechanism prevents
inadvertent lowering of the saddle
• Optional rubber positioning wheels
• Quick lift foot pedal
• Two year guarantee
1002 Trolley Jack
Stock No Capacity Length Price
332790 10 Tonnes 1550 mm 1739.95
Min Saddle Height 195 mm
Max Saddle Height 650 mm
Max Chassis Height 280 mm
Weight 155 kg
Rubber Positioning Wheel Kit
Pair of low pressure transport wheels. Fit on pre-drilled
and tapped points at centre of gravity of jack chassis to
help move heavy jacks.
Stock No Fits Price
332800 1002, 5001 HL 129.95
Provides protection for the jacking point.
Stock No Fits Price
332810 2001, 1301 HL, 2001 HL 25.50
332815 3003 CXQ 8.76
Air Operated Jack
Viking brand. Powerful and reliable, this jack is ideal for
workshop or roadside use. At modest cost, it takes the
effort out of lifting heavy plant, tractors and commercial
vehicles. The required air supply is a substantial free air
delivery of 9.5 cfm, requiring a compressor larger that
3hp. Working pressure is 100-140 psi.
YAJ 20 B Air Jack
Stock No Capacity Length inc Handle Price
332825 20 Tonnes 1761 mm 751.96
Min Saddle Height 205 mm
Max Saddle Height 430 mm
Piston Stroke 120 mm
Weight 40 kg
Air Jack Spacers. Adaptors for model no. YAJ 20 B
Stock No Diameter Height Price
332830 70 mm 20 mm 56.00
332835 50 mm 20 mm 55.00
332840 50 mm 60 mm 57.00
332845 50 mm 100 mm 59.00
Stock no. 332830 is supplied with jack
Looking for an item not listed? Call our Sales Team on 01224 620944
We accept Visa and Mastercard, Debit and Credit Cards

AIR JACKS/RATCHET JACKS/SCISSOR JACKS 187
Pneumatic Fast Jacks CONTINUED >
Air Operated Jacks
Sealey brand. Powerful and reliable, these jacks are ideal
for workshop of roadside use. At modest cost, they take
the effort out of lifting heavy plant, tractors and
commercial vehicles. The required air supply is a
substantial free air delivery of 9.5 cfm, requiring a
compressor larger than 3 hp. Features include
• Working pressure 100-145 psi
• Telescopic ram allows greater lifting range
• Deadman controls for safety
• Multi-position locking handle
• Spacer supplied to close gap between saddle and
jacking point
MAJ 15-30 Air Jack
Stock No Capacity Length inc Handle Price
332850 30 Tonnes 2085 mm 839.95
Minimum Height 185 mm
Maximum Height 375 mm (Load 30 Tonnes)
470 mm (Load 15 Tonnes)
Piston Stroke 185 mm
Weight 52 kg
MAJ 10-35 Air Jack. Low entry jack
Stock No Capacity Length inc Handle Price
332855 35 Tonnes 2085 mm 1195.45
Minimum Height 125 mm
Maximum Height 240 mm (Load 30 Tonnes)
290 mm (Load 20 Tonnes)
345 mm (Load 10 Tonnes)
Piston Stroke 160 mm
Weight 43 kg
MAJ 20-65 Air Jack
Stock No Capacity Length inc Handle Price
332860 65 Tonnes 2335 mm 1295.95
Minimum Height 180 mm
Maximum Height 358 mm (Load 60 Tonnes)
434 mm (Load 35 Tonnes)
515 mm (Load 20 Tonnes)
Piston Stroke 235 mm
Weight 75 kg
Pneumatic Fast Jacks
Sealey brand. Fast action jacks that rise unladen to their
full height in a few seconds. Suitable for workshop and
roadside applications. Features include
• Wide load plate that spreads ground loading
• Integral telescopic stabiliser
• Pneumatic stroke limiter that prevents over inflation
• Air inlet 1 ⁄4" BSP
• Operating pressure 90 psi
CONTINUED >
AFJ 2 Pneumatic Jack
Stock No Capacity Lift Time Price
332865 2 Tonnes 3 Sec 540.00
Minimum Height 165 mm
Maximum Height 345 mm
Weight 14 kg
AFJ2F Pneumatic Jack. Specification as AFJ2, but
with integral trolley and long handle
Stock No Capacity Lift Time Price
332870 2 Tonnes 3 Sec 639.96
Minimum Height 165 mm
Maximum Height 345 mm
Handle Length 1200 mm
Weight 15 kg
AFJ 3 Pneumatic Jack
Stock No Capacity Lift Time Price
332875 3 Tonnes 4.5 Sec 629.95
Minimum Height 200 mm
Maximum Height 490 mm
Weight 16 kg
AFJ3F Pneumatic Jack. Specification as AFJ3, but
with integral trolley and long handle
Stock No Capacity Lift Time Price
332880 3 Tonnes 4.5 Sec 709.95
Minimum Height 200 mm
Maximum Height 490 mm
Handle Length 1200 mm
Weight 17 kg
Air Operated Bottle Jacks
Sealey brand. Compressed air or pumping handle
operation. Features include
• Easy disassembly for servicing
• Air consumption 9.5 cfm
• Operating pressure 100-145 psi
• Piston stroke 150 mm
AM12 Bottle Jack
Stock No Capacity Weight Price
332885 12 Tonnes 12 kg 303.96
Minimum Saddle Height 226 mm
Maximum Saddle Height 451 mm
AM 15 Bottle Jack
Stock No Capacity Weight Price
332890 15 Tonnes 14 kg 347.96
Minimum Saddle Height 228 mm
Maximum Saddle Height 453 mm
AM 20 Bottle Jack
Stock No Capacity Weight Price
332895 20 Tonnes 16 kg 383.96
Minimum Saddle Height 234 mm
Maximum Saddle Height 459 mm
AM 30 Bottle Jack
Stock No Capacity Weight Price
332900 30 Tonnes 20 kg 455.96
Minimum Saddle Height 242 mm
Maximum Saddle Height 467 mm
Hydraulic Forklift/Tractor Jack
Sealey brand. Strong, versatile, dual function jack.
Scissor action jack has ultra low minimum height of 55
mm which allows use under forklifts. Cylinder cap jack
has minimum height of 415 mm making it suitable for
tractors and other agricultural vehicles.
Scissor Cylinder
Stock No
Capacity Capacity
Price
332902 4 Tonnes 5 Tonnes 271.96
Scissor Nose: Minimum Height 55 mm
Maximum Height 435 mm
Cylinder Cap: Minimum Height 415 mm
Maximum Height 735 mm
Weight 46 kg
High Lift Ratchet Jack
Sealey brand. Heavy duty, lever operated, ratchet jack
with 48 inch beam. Reversible ratchet mechanism allows
jack to be used for lifting or lowering. Versatile and
lightweight unit, suitable for pulling tree stumps,
tensioning fences and positioning machinery. Popular
with 4x4 owners.
Stock No Capacity Weight Price
332904 1 Tonne 14 kg 63.96
Minimum Height 150 mm
Maximum Height 1200 mm
Scissor Jacks
Sealey brand. Manufactured to GS/TUV standards. Fine
rolled thread and precision made thrust bearing for long
life and smooth operation.
1 Tonne Scissor Jack
Stock No Min Height Max Height Price
332906 82 mm 350 mm 13.56
1.5 Tonne Scissor Jack
Stock No Min Height Max Height Price
332908 100 mm 365 mm 15.96

188
TRANSMISSION JACKS/JACKING BEAMS
Vertical Transmission Jacks
Sealey brand. Economy models for general workshop
applications. Strong construction for safety and
durability. Features include
• High speed lift to gearbox, just lift piston
• Foot pedal operation keeps hands free
• Deadman release for added safety, reduces risk of
inadvertent lowering
• Highly manoeuvrable on castor wheels
• Can be fitted with adjustable gearbox support
300TR Transmission Jack
Stock No Capacity Base Size Price
332910 300 kg 560 x 570 mm 239.96
Minimum Saddle Height 1120 mm
Maximum Saddle Height 1940 mm
Optional Gearbox Support Model No. ADT3
600TR Transmission Jack
Stock No Capacity Base Size Price
332912 600 kg 560x570 mm 271.96
Minimum Saddle Height 1175 mm
Maximum Saddle Height 1985 mm
Optional Gearbox Support Model Nos. ADT1, ADT2, ADT3
750TR Transmission Jack
Stock No Capacity Base Size Price
332914 750 kg 650x650 mm 359.95
Minimum Saddle Height 1193 mm
Maximum Saddle Height 2013 mm
Optional Gearbox Support Model No. ADT4
1250TR Transmission Jack
Stock No Capacity Base Size Price
332916 1250 kg 650x650 mm 391.96
Minimum Saddle Height 1193 mm
Maximum Saddle Height 2008 mm
Optional Gearbox Support Model No. ADT4
Adjustable Gearbox Supports. Fully adjustable
saddles with forward, backward and side to side tilt.
Stock No Model No. Capacity Price
332918 ADT1 300 kg 225.00
332920 ADT2 750 kg 420.00
332922 ADT3 500 kg 103.96
332924 ADT4 1200 kg 179.95
Transmission Jack Saddle. Fits all vertical
transmission jacks in this section plus model no. 1500GTA
in the next section. Used for various tasks such as the
installation/removal of petrol tanks, suspension
components, exhausts and towing hooks.
Stock No Description Price
332926 Transmission Jack Saddle 30.36
Vertical Transmission Jacks
Sealey brand. Professional models with superior lifting
ranges. Strong construction for safety and durability.
Features include
• High speed lift to gearbox, just lift piston
• Foot pedal operation keeps hands free
• Two stage telescopic lift allows use where undervehicle
space is restricted
• Highly manoeuvrable on castor wheels
• Two models fitted with adjustable saddles
500 GTA Transmission Jack. Supplied complete
with adjustable saddle.
Stock No Capacity Base Size Price
332928 500 kg 720x720 mm 559.96
Minimum Saddle Height 825 mm
Maximum Saddle Height 1841 mm
800 GTA Transmission Jack. Supplied complete
with adjustable saddle.
Stock No Capacity Base Size Price
332930 800 kg 760x760 mm 639.96
Minimum Saddle Height 1025 mm
Maximum Saddle Height 1950 mm
1500 GTA Transmission Jack. Fixed saddle.
Stock No Capacity Base Size Price
332932 1500 kg 710x710 mm 1099.95
Minimum Saddle Height 880 mm
Maximum Saddle Height 1900 mm
Floor Transmission Jacks
Sealey brand. Heavy duty models for workshop use.
Features include
• Precision valve allows delicate adjustment when
replacing/removing gearboxes
• Supplied with chain for safe loading
• Highly manoeuvrable on castor wheels
• Adjustable saddle
• Saddle has 40 mm lateral travel on model nos. 1000E,
1500E
800CE Floor Transmission Jack
Stock No Capacity Chassis Length Price
332934 800 kg 820 mm 669.95
Minimum Saddle Height 200 mm
Maximum Saddle Height 772 mm
Saddle Tilt Forward 20°
Saddle Tilt Backward 17°
Saddle Tilt Side to Side 15°
CONTINUED >
Floor Transmission Jacks CONTINUED >
1000E Floor Transmission Jack
Stock No Capacity Chassis Length Price
332936 1000 kg 1040 mm 639.96
Minimum Saddle Height 256 mm
Maximum Saddle Height 843 mm
Saddle Tilt Forward 30°
Saddle Tilt Backward 15°
Saddle Tilt Side to Side 10°
1500E Floor Transmission Jack
Stock No Capacity Chassis Length Price
332938 1500 kg 1130 mm 751.96
Minimum Saddle Height 160 mm
Maximum Saddle Height 870 mm
Saddle Tilt Forward 30°
Saddle Tilt Backward 15°
Saddle Tilt Side to Side None
Hydraulic Jacking Beams
Sealey brand. Fully certified and approved to comply with
DOT requirements. MOT approved. Standard models have
flat arms with rollers that allow the unloaded unit to be
run smoothly along the pit or ramp. Alternative models
have hook arms, but these are not fitted with rollers.
Features include
• Two stage mechanical safety lock
• Telescopic finger guards to prevent injury
• Supplied with two pairs of aluminium support blocks
Flat Arm Jacking Beams. With rollers
Stock No Capacity Weight Price
332940 1.6 Tonnes 50 kg 949.95
332942 2.8 Tonnes 63 kg 1239.95
Support Arm Reach 780 - 1075 mm
Beam Lift 50 - 225 mm
Load Arm Reach 790 - 1290 mm
Hook Arm Jacking Beams
Stock No Capacity Weight Price
332944 1.6 Tonnes 50 kg 949.95
332946 2.8 Tonnes 63 kg 1239.95
Support Arm Reach 780 - 1075 mm
Beam Lift 50 - 225 mm
Load Arm Reach 790 - 1290 mm
Wide Lift Flat Arm Jacking Beams. With rollers.
Wide arm configuration meets VI recommendations for
lifting on jacking point.
Stock No Capacity Weight Price
332948 1.6 Tonnes 50 kg 1174.95
332950 2.8 Tonnes 63 kg 1464.95
Support Arm Reach 780 - 1075 mm
Beam Lift 50 - 225 mm
Load Arm Reach 790 - 1600 mm
Wide Lift Hook Arm Jacking Beams. Wide arm
configuration meets VI recommendations for lifting on
jacking point.
Stock No Capacity Weight Price
332952 1.6 Tonnes 50 kg 1174.95
332954 2.8 Tonnes 63 kg 1464.95
Support Arm Reach 780 - 1075 mm
Beam Lift 50 - 225 mm
Load Arm Reach 790 - 1600 mm

CAR RAMPS/ENGINE STANDS/CRANES 189
Engine Stands CONTINUED > Heavy Lift Engine Support CONTINUED >
Car Ramps
Sealey brand. Supplied in pairs that stack together for
easy storage. Made from 3.5 mm steel section with
corrosion-resistant finish. Suitable for professional and
DIY applications.
Stock No Capacity Max Tyre Width Price
332956 2000 kg 180 mm 47.96
332958 2500 kg 210 mm 39.96
Ramp Height 210 mm
Ramp Width 230 mm
Capacity means capacity per pair
Wheel Chocks
Draper brand. Used to stop vehicles moving whilst jacked
up.
Stock No Description Price
331358 Pair of Rubber Wheel Chocks 7.32
Hydraulic Jack Oil
Sealey brand. Specially formulated oil for use in hydraulic
jacks.
Stock No Description Price
332960 500 ml 5.16
332962 5 litre 22.36
332964 25 litre 85.45
Engine Stands
Sealey brand. Universal engine stands that accept a wide
variety of engines and gearboxes. Features include
• Head swings 360º for accessibility to all parts of the
engine
• Fully adjustable mounting arms
• Highly manoeuvrable on castor wheels
CONTINUED >
ES 350 Engine Stand
Stock No Capacity Height Price
332966 350 kg 920 mm 53.56
Length 890 mm
Width 790 mm
ES 450 Engine Stand
Stock No Capacity Height Price
332968 450 kg 930 mm 67.96
Length 950 mm
Width 790 mm
ES 550 Engine Stand
Stock No Capacity Height Price
332970 550 kg 930 mm 79.96
Length 1000 mm
Width 845 mm
ES 900 Engine Stand. High capacity stand for larger
and heavier engines and gearboxes.
Stock No Capacity Height Price
332972 900 kg 1000 mm 145.95
Length 1300 mm
Width 820 mm
ES 900F Engine Stand. Features folding legs for
easier storage and transport.
Stock No Capacity Height Price
332974 900 kg 890 mm 151.96
Length 1105 mm
Width 893 mm
Universal Engine Supports
Sealey brand. Designed to support and accurately
position engines during maintenance operations. Also
used as an aid for the removal of gearboxes and
transmissions. Adjustable width with locking device.
Beams supported on rubber feet and fine adjustment
control is obtained by using a screw/hook mechanism.
Supplied with a short length of chain.
ES 300 Engine Support Beam
Stock No Capacity Screw Travel Price
332976 300 kg 210 mm 67.96
Min Width 660 mm
Max Width 1420 mm
ES 500 Engine Support Beam
Stock No Capacity Screw Travel Price
332978 500 kg 350 mm 87.96
Min Width 1020 mm
Max Width 1600 mm
Heavy Lift Engine Support
Sealey brand. Suitable for heavy engines, including six
cylinder variants. Supports engine during maintenance
operations. Adjustable for width and length. Front leg
adjustable for height. Main beam supported on rubber
feet. Supplied with two short lifting chains.
CONTINUED >
Stock No Model No. Capacity Price
332980 ES 600 600 kg 127.96
Min Width 1010 mm
Max Width 1210 mm
Min Length 600 mm
Max Length 875 mm
1 Tonne Folding Crane
Sealey hydraulic crane. Economy model, delivered in
knock down form for self-assembly. Weighing only 74 kg,
it is perfect for mobile or workshop use. Features include
• Fast folding for easy storage and transportation
• Heavy duty castors
• Side pump access with removable handle
• H&SE Test Certificate included
Stock No Model No. Capacity Price
332982 SC 10 1 Tonne 223.96
Four Position Jib
Position 1: Jib Length 893 mm, Lifting Capacity 1000 kg
Position 2: Jib Length 983 mm, Lifting Capacity 750 kg
Position 3: Jib Length 1073 mm, Lifting Capacity 500 kg
Position 4: Jib Length 1163 mm, Lifting Capacity 250 kg
Position 1: Max Lifting Height 1855 mm
Position 4: Max Lifting Height 1990 mm
Overall Height 1550 mm
Frame Length 1518 mm
Frame Width 962 mm
Weight 74 kg
1 Tonne Folding Crane
Sealey hydraulic crane. Economy model. Weighing only
80kg, it is perfect for mobile or workshop use. Features
include
• Fast folding for easy storage and transportation
• Heavy duty castors
• Pump access from side
• H&SE Test Certificate included
Stock No Model No. Capacity Price
332984 PH 10 1 Tonne 295.96
Four Position Jib
Position 1: Jib Length 893 mm, Lifting Capacity 1000 kg
Position 2: Jib Length 983 mm, Lifting Capacity 750 kg
Position 3: Jib Length 1073 mm, Lifting Capacity 500 kg
Position 4: Jib Length 1163 mm, Lifting Capacity 250 kg
Position 1: Max Lifting Height 1855 mm
Position 4: Max Lifting Height 1990 mm
Overall Height 1550 mm
Frame Length 1518 mm
Frame Width 962 mm
Weight 80 kg

190
CRANES/CHAIN BLOCKS
2 Tonne Folding Crane
Sealey hydraulic crane. Economy model, delivered in
knock down form for self-assembly. Weighing only 96 kg,
it is perfect for mobile or workshop use. Features include
• Fast folding for easy storage and transportation
• Heavy duty castors
• Pump access from side
• H&SE Test Certificate included
Stock No Model No. Capacity Price
332986 PH 20 2 Tonnes 295.96
Four Position Jib
Position 1: Jib Length 1020 mm, Lifting Capacity 2000 kg
Position 2: Jib Length 1200 mm, Lifting Capacity 1500 kg
Position 3: Jib Length 1380 mm, Lifting Capacity 1000 kg
Position 4: Jib Length 1560 mm, Lifting Capacity 500 kg
Position 1: Max Lifting Height 1650 mm
Position 4: Max Lifting Height 2130 mm
Overall Height 1460 mm
Frame Length 1760 mm
Frame Width 950 mm
Weight 96 kg
2 Tonne Folding Crane
Sealey hydraulic crane. Suitable for professional use on
commercial vehicles and heavy plant. Features include
• Fast folding for easy storage and transportation
• Heavy duty hydraulics
• Heavy duty polyamide wheels with swivel rear castors
• Mini castor wheels for ease of movement when folded
• Fitted with deadman handle for safety
• Heavy lift capacity of 1500 kg even when jib extended
to 1600 mm
• H&SE Test Certificate included
Stock No Model No. Capacity Price
332988 WF 20 2 Tonnes 1120.00
Three Position Jib
Position 1: Jib Length 1275 mm, Lifting Capacity 2000 kg
Position 2: Jib Length 1420 mm, Lifting Capacity 1750 kg
Position 3: Jib Length 1570 mm, Lifting Capacity 1650 kg
Position 1: Max Lifting Height 2340 mm
Position 3: Max Lifting Height 2500 mm
Overall Height 1720 mm
Frame Length 1900 mm
Frame Width 1160 mm
Weight 173 kg
Industrial Cranes
Sealey hydraulic cranes. Rigid design for heavy industrial
and commercial vehicle applications. Features include
• Easy roll polyamide castors that will not damage or
mark workshop floors
• Heavy duty hydraulics
• Rotating hydraulic unit for easy operation (except
model no. WD302)
• Fitted with deadman handle for safety
• H&SE Test Certificate included
1 Tonne Industrial Crane. With low-slung legs for
easy access.
Stock No Model No. Capacity Price
332990 WD 102 1 Tonne 879.96
Three Position Jib
Position 1: Jib Length 1260 mm, Lifting Capacity 1000 kg
Position 2: Jib Length 1405 mm, Lifting Capacity 800 kg
Position 3: Jib Length 1550 mm, Lifting Capacity 700 kg
Position 1: Max Lifting Height 2300 mm
Position 3: Max Lifting Height 2440 mm
Overall Height 1670 mm
Frame Length 1800 mm
Frame Width 980 mm
Weight 130 kg
1.5 Tonne Industrial Crane
Stock No Model No. Capacity Price
332992 WD 152 1.5 Tonnes 1119.96
Three Position Jib
Position 1: Jib Length 1275 mm, Lifting Capacity 1500 kg
Position 2: Jib Length 1420 mm, Lifting Capacity 1250 kg
Position 3: Jib Length 1570 mm, Lifting Capacity 1150 kg
Position 1: Max Lifting Height 2350 mm
Position 3: Max Lifting Height 2500 mm
Overall Height 1690 mm
Frame Length 1870 mm
Frame Width 980 mm
Weight 150 kg
2 Tonne Industrial Crane
Stock No Model No. Capacity Price
332994 WD 202 2 Tonnes 1279.96
Three Position Jib
Position 1: Jib Length 1275 mm, Lifting Capacity 2000 kg
Position 2: Jib Length 1420 mm, Lifting Capacity 1750 kg
Position 3: Jib Length 1570 mm, Lifting Capacity 1650 kg
Position 1: Max Lifting Height 2340 mm
Position 3: Max Lifting Height 2470 mm
Overall Height 1690 mm
Frame Length 1870 mm
Frame Width 980 mm
Weight 180 kg
3 Tonne Industrial Crane. Two speed hydraulic
pump features rapid lift when not under load.
Stock No Model No. Capacity Price
332996 WD 302 3 Tonnes 2399.96
Three Position Jib
Position 1: Jib Length 1620 mm, Lifting Capacity 3000 kg
Position 2: Jib Length 1765 mm, Lifting Capacity 2500 kg
Position 3: Jib Length 1910 mm, Lifting Capacity 2300 kg
Position 1: Max Lifting Height 2760 mm
Position 3: Max Lifting Height 2920 mm
Overall Height 2000 mm
Frame Length 2150 mm
Frame Width 1290 mm
Weight 302 kg
Load Leveller
Sealey brand. Handles and levels heavy, off-centre loads
quickly and easily. Suitable for car, van, truck and marine
engines. Compatible with all Sealey engine cranes.
Supplied with H&SE Test Certificate.
Stock No Model No. Capacity Price
332998 LS 500 500 kg 39.96
Lifting Straps
Sealey brand. Weight for weight, these straps are 3-5
times stronger than chains and have the added
advantage that overload can be detected early by fraying
of the straps. Manufactured with finished loop ends.
Stock No SWL1 SWL2 Length Price
333100 2 Tonnes 4 Tonnes 750 mm 36.95
333102 2 Tonnes 4 Tonnes 1500 mm 45.45
333104 3 Tonnes 6 Tonnes 750 mm 49.95
333106 3 Tonnes 6 Tonnes 1500 mm 59.95
333108 4 Tonnes 8 Tonnes 1500 mm 79.95
SWL1. Safe working load for a load slung at one end
(straight configuration)
SWL2. Safe working load for a load slung between the
loop eyes (U configuration)
Economy Chain Blocks
Sealey brand. Lightweight, portable chain blocks; for use
in workshop factory or farm. Supplied with H&SE Test
Certificate.
CBE 500 Chain Block
Stock No SWL Standard Lift Price
333110 500 kg 2.5 m 87.45
Test Load 750 kg
Load Chain Diameter 6 mm
Pulling Effort 23 kg
Head Room 255 mm
Hook Aperture 24 mm
Weight 8.0 kg
CONTINUED >

CHAIN BLOCKS/HOISTS/BENCH PRESSES 191
Economy Chain Blocks CONTINUED > Chain Blocks CONTINUED >
CBE 1000 Chain Block
Stock No SWL Standard Lift Price
333112 1000 kg 2.5 m 112.45
Test Load 1500 kg
Load Chain Diameter 6 mm
Pulling Effort 32 kg
Head Room 300 mm
Hook Aperture 28 mm
Weight 10.2 kg
CB 5000 Chain Block
Stock No SWL Standard Lift Price
333122 5000 kg 3.0 m 343.96
Test Load 6250 kg
Load Chain Diameter 10 mm
Pulling Effort 42 kg
Head Room 588 mm
Hook Aperture 52 mm
Weight 39 kg
Chain Blocks
Sealey brand. Industrial quality chain blocks. Features
include
• Heat treated and ground triple-spur geared shaft and
pinion
• Compact gear housing
• Chain made from hardened alloy steel
• Mechanical load brake for safety
• Safety latch on load hook
• Supplied with H&SE Test Certificate
CB 500 Chain Block
Stock No SWL Standard Lift Price
333114 500 kg 2.5 m 99.96
Test Load 625 kg
Load Chain Diameter 5 mm
Pulling Effort 27 kg
Head Room 295 mm
Hook Aperture 30 mm
Weight 7.0 kg
CB 1000 Chain Block
Stock No SWL Standard Lift Price
333116 1000 kg 2.5 m 111.96
Test Load 1250 kg
Load Chain Diameter 6 mm
Pulling Effort 28 kg
Head Room 330 mm
Hook Aperture 35 mm
Weight 10.5 kg
CB 2000 Chain Block
Stock No SWL Standard Lift Price
333118 2000 kg 2.5 m 183.96
Test Load 2500 kg
Load Chain Diameter 6 mm
Pulling Effort 30 kg
Head Room 470 mm
Hook Aperture 41 mm
Weight 15.5 kg
CB 3000 Chain Block
Stock No SWL Standard Lift Price
333120 3200 kg 3.0 m 239.96
Test Load 4000 kg
Load Chain Diameter 7 mm
Pulling Effort 38 kg
Head Room 530 mm
Hook Aperture 47 mm
Weight 23.5 kg
CONTINUED >
Lever Hoists
Sealey brand. Rugged, heavy duty, lever hoists. Features
include
• Drop forged, heat treated pinion gear
• Completely enclosed gearbox
• Chain made from hardened alloy steel
• Heavy duty brake for safe operation
• Free-chaining feature allows quick take up of slack in
load chain
• Supplied with H&SE Test Certificate
LH 750 Lever Hoist
Stock No SWL Lever Length Price
333124 750 kg 240 mm 151.96
Test Load 1125 kg
Load Chain Diameter 6.3 mm
Pulling Effort 22 kg
Head Room 275 mm
Hook Aperture 26 mm
Weight 7.4 kg
LH 1000 Lever Hoist
Stock No SWL Lever Length Price
333126 1000 kg 240 mm 167.96
Test Load 1500 kg
Load Chain Diameter 6.3 mm
Pulling Effort 29 kg
Head Room 295 mm
Hook Aperture 30 mm
Weight 7.7 kg
LH 1500 Lever Hoist
Stock No SWL Lever Length Price
333128 1500 kg 360 mm 191.96
Test Load 2250 kg
Load Chain Diameter 7.1 mm
Pulling Effort 26 kg
Head Room 320 mm
Hook Aperture 34 mm
Weight 10.8 kg
LH 3000 Lever Hoist
Stock No SWL Lever Length Price
333130 3000 kg 360 mm 263.96
Test Load 4500 kg
Load Chain Diameter 10 mm
Pulling Effort 38 kg
Head Room 400 mm
Hook Aperture 38 mm
Weight 18.9 kg
Power Hoist
Sealey brand. Electric powered hoist. Features include
• Single line or double line pull
• Supplied with attached support brackets
• Approved to EC and UK Lifting Gear Regulations
• Supplied with H&SE Test Certificate
Stock No Voltage Power Price
333132 230 Volts 250 Watts 127.96
Capacity (Single Cable) 125 kg
Capacity (Double Cable) 250 kg
Lift Height (Single Cable) 11 metres
Lift Height (Double Cable) 5.5 metres
Weight 11 kg
Standard Bench Presses
Sealey hydraulic presses. For use in workshop and
garage. Detachable pump and ram allow hydraulics to be
used for other purposes when press is not in use.
Supplied with 4-way steel base for use on table.
YK 10 BLG Bench Press. Supplied without
hydraulic gauge
Stock No Capacity Ram Stroke Price
333134 10 Tonnes 155 mm 263.96
Extension Screw Not Supplied
Max Height: Ram to Table 390 mm
Min Height: Ram to Table 190 mm
Table Aperture 140 mm
Working Table Width 360 mm
Overall Height 855 mm
Weight 52 kg
YK 10 B Bench Press. Supplied with hydraulic
pressure gauge.
Stock No Capacity Ram Stroke Price
333136 10 Tonnes 155 mm 287.96
Extension Screw Not Supplied
Max Height: Ram to Table 390 mm
Min Height: Ram to Table 190 mm
Table Aperture 140 mm
Working Table Width 360 mm
Overall Height 945 mm
Weight 53 kg
For ease and accuracy when placing orders please use our stock number

192
BENCH & FLOOR PRESSES
Heavy Duty Bench Press
Sealey hydraulic press. For use in workshop and garage.
One-piece hydraulic unit. External return springs for
economy. Supplied with reversible flat plate/V-blocks.
Biggest selling automotive bench press in the UK for the
last 23 years.
YK 15 BLG Bench Press. Supplied without
hydraulic gauge.
Stock No Capacity Ram Stroke Price
333138 15 Tonnes 150 mm 449.95
Extension Screw 60 mm
Max Height: Ram to Table 300 mm
Min Height: Ram to Table 150 mm
Table Aperture 112 mm
Working Table Width 500 mm
Overall Height 945 mm
Weight 81 kg
M Series Heavy Duty Bench Presses
Sealey top-of-the-line hydraulic presses. High
specification machines that offer great value for money.
For use in workshop and garage. Hydraulics with internal
return springs are built into the head of the press to
improve access to the working area. Supplied with
reversible flat plate/V-blocks. Supplied with patented,
superior hydraulic gauge.
YK 10 BM Bench Press. Supplied with hydraulic
pressure gauge.
Stock No Capacity Ram Stroke Price
333140 10 Tonnes 95 mm 535.96
Extension Screw 70 mm
Max Height: Ram to Table 455 mm
Min Height: Ram to Table 155 mm
Table Aperture 140 mm
Working Table Width 500 mm
Overall Height 1035 mm
Weight 76 kg
YK 15 BM Bench Press. Supplied with hydraulic
pressure gauge.
Stock No Capacity Ram Stroke Price
333142 15 Tonnes 95 mm 591.96
Extension Screw 70 mm
Max Height: Ram to Table 455 mm
Min Height: Ram to Table 155 mm
Table Aperture 140 mm
Working Table Width 500 mm
Overall Height 945 mm
Weight 81 kg
Standard Floor Presses
Sealey hydraulic presses. For use in workshop and
garage. Detachable pump and ram allows hydraulics to
be used for other purposes when press is not in use.
Supplied with 4-way steel base.
YK 10 FLG Floor Press. Supplied without hydraulic
gauge.
Stock No Capacity Ram Stroke Price
333144 10 Tonnes 203 mm 335.96
Extension Screw Not Supplied
Max Height: Ram to Table 936 mm
Min Height: Ram to Table 12 mm
Table Aperture 90 mm
Working Table Width 416 mm
Overall Height 1440 mm
Weight 66 kg
YK 10 F Floor Press. Supplied with hydraulic
pressure gauge.
Stock No Capacity Ram Stroke Price
333146 10 Tonnes 203 mm 359.96
Extension Screw Not Supplied
Max Height: Ram to Table 936 mm
Min Height: Ram to Table 12 mm
Table Aperture 90 mm
Working Table Width 416 mm
Overall Height 1514 mm
Weight 67 kg
YK 20 Floor Press. Supplied with hydraulic pressure
gauge.
Stock No Capacity Ram Stroke Price
333148 20 Tonnes 198 mm 629.95
Extension Screw Not Supplied
Max Height: Ram to Table 885 mm
Min Height: Ram to Table 22 mm
Table Aperture 105 mm
Working Table Width 554 mm
Overall Height 1770 mm
Weight 79 kg
Heavy Duty Floor Presses
Sealey hydraulic presses. For use in workshop or garage.
One-piece hydraulic unit. External return springs for
economy. Supplied with reversible flat plate/V-blocks.
Biggest selling automotive floor presses in the UK for the
last 23 years.
CONTINUED >
Heavy Duty Floor Presses CONTINUED >
YK 15 Floor Press. Supplied with hydraulic pressure
gauge.
Stock No Capacity Ram Stroke Price
333150 15 Tonnes 150 mm 719.96
Extension Screw 60 mm
Max Height: Ram to Table 600 mm
Min Height: Ram to Table 150 mm
Table Aperture 112 mm
Working Table Width 500 mm
Overall Height 1675 mm
Weight 80 kg
YK 30 Floor Press. Supplied with hydraulic pressure
gauge.
Stock No Capacity Ram Stroke Price
333152 30 Tonnes 150 mm 959.96
Extension Screw 60 mm
Max Height: Ram to Table 600 mm
Min Height: Ram to Table 150 mm
Table Aperture 133 mm
Working Table Width 550 mm
Overall Height 1750 mm
Weight 122 kg
M Series Heavy Duty Floor Presses
Sealey top-of-the-line hydraulic presses. High
specification machines that offer great value for money.
For use in workshop and garage. Hydraulics with internal
return springs are built into the head of the press to
improve access to the working area. Supplied with
reversible flat plate/V-blocks. Supplied with patented,
superior hydraulic gauge.
YK 15 FM Floor Press. Fitted with hydraulic
pressure gauge.
Stock No Capacity Ram Stroke Price
333154 15 Tonnes 95 mm 839.96
Extension Screw 67 mm
Max Height: Ram to Table 600 mm
Min Height: Ram to Table 150 mm
Table Aperture 140 mm
Working Table Width 500 mm
Overall Height 1650 mm
Weight 86 kg
YK 30 FM Floor Press. Fitted with hydraulic
pressure gauge.
Stock No Capacity Ram Stroke Price
333156 30 Tonnes 95 mm 1039.96
Extension Screw 70 mm
Max Height: Ram to Table 620 mm
Min Height: Ram to Table 180 mm
Table Aperture 143 mm
Working Table Width 550 mm
Overall Height 1750 mm
Weight 125 kg
YK 50 FM Floor Press. Fitted with hydraulic
pressure gauge, table winch and two-speed hydraulic unit.
Stock No Capacity Ram Stroke Price
333158 50 Tonnes 95 mm 1599.96
Extension Screw 70 mm
Max Height: Ram to Table 615 mm
Min Height: Ram to Table 165 mm
Table Aperture 170 mm
Working Table Width 550 mm
Overall Height 1830 mm
Weight 240 kg

FLOOR PRESSES/CLEANING TANKS 193
Air/Hydraulic Floor Presses
Bench Top Cleaning Tank
Turbo Workshop Cleaning Tank
Sealey, heavy duty, frame press with integrally mounted,
reliable, air operated, hydraulic pump unit. Reinforced
frame head, fitted with sliding ram assembly, allowing offcentre
pressing applications.
Features include
• Fitted with hydraulic pressure gauge
• Fitted with table winch
• Supplied with pair of V-blocks
• Lateral ram travel 250 mm
• Working pressure 100-145 psi
• Air consumption 9 cfm
YK 30 FAH Air/Hydraulic Floor Press
Stock No Capacity Ram Stroke Price
333160 30 Tonnes 95 mm 1619.95
Extension Screw 75 mm
Max Height: Ram to Table 615 mm
Min Height: Ram to Table 165 mm
Table Aperture 145 mm
Working Table Width 710 mm
Overall Height 1770 mm
Weight 202 kg
YK 30 FAHFP Air/Hydraulic Floor Press. With
foot pedal control.
Stock No Capacity Ram Stroke Price
333162 30 Tonnes 95 mm 1799.96
Extension Screw 75 mm
Max Height: Ram to Table 615 mm
Min Height: Ram to Table 165 mm
Table Aperture 145 mm
Working Table Width 710 mm
Overall Height 1770 mm
Weight 202 kg
YK 50 FAH Air/Hydraulic Floor Press
Stock No Capacity Ram Stroke Price
333164 50 Tonnes 95 mm 1839.96
Extension Screw 75 mm
Max Height: Ram to Table 615 mm
Min Height: Ram to Table 165 mm
Table Aperture 145 mm
Working Table Width 710 mm
Overall Height 1810 mm
Weight 220 kg
YK 50 FAHFP Air/Hydraulic Floor Press. With
foot pedal control.
Stock No Capacity Ram Stroke Price
333166 50 Tonnes 95 mm 1959.96
Extension Screw 75 mm
Max Height: Ram to Table 615 mm
Min Height: Ram to Table 165 mm
Table Aperture 145 mm
Working Table Width 710 mm
Overall Height 1810 mm
Weight 220 kg
Sealey brand. One-piece tank with triple baked finish.
Features include
• Fully sealed electric motor with magnetic drive pump
unit
• Circulating fluid is filtered before entering the pump
• Replaceable filter
• Flexible metal fluid delivery pipe
• Removable shelf included
• Fusible linked fire lid
SM 21 Cleaning Tank
Stock No Tank Dimensions (L x W x H) Price
333168 395 x 295 x 215 mm 63.96
Overall Height 220 mm
Min Working Capacity 6 Litres
Max Working Capacity 13 Litres
Pump Output 160 Litres/Hour
Motor 230 Volt 35 Watt
Weight 7.5 kg
Workshop Cleaning Tank
Sealey brand. Heavy duty one-piece tank with triple
baked enamel finish. Features include
• Fully sealed electric motor with magnetic drive pump
unit
• Circulating fluid is filtered before entering the pump
• Replaceable filter
• Flexible metal fluid delivery pipe
• Supplied with removable shelf and parts basket
• Supplied with metal stand with integral storage shelf
• Self-latching, fusible linked fire lid
SM 19 Cleaning Tank
Stock No Tank Dimensions (L x W x H) Price
333170 765 x 475 x 250 mm 135.96
Overall Height 860 mm
Min Working Capacity 40 Litres
Max Working Capacity 50 Litres
Pump Output 190 Litres/Hour
Motor 230 Volt 20 Watt
Weight 25 kg
Large volume user and require a quotation?
Call Grahame our Sales Director on 01224 615030
Sealey brand. Heavy duty one-piece tank with triple
baked enamel finish. This unit can be connected to the
workshop air supply to give air bubble flow through the
tank, reducing pre-soaking and cleaning time. Features
include
• Fully sealed electric motor with magnetic drive pump
unit
• Turbo feature and electric motor operate
independently; one can be run without the other.
• Circulating fluid is filtered before entering the pump
• Replaceable filter
• Flexible metal fluid delivery pipe
• Supplied with removable shelf and parts basket
• Supplied with metal stand with integral storage shelf
• Self-latching, fusible linked fire lid
SM 20 Cleaning Tank
Stock No Tank Dimensions (L x W x H) Price
333172 730 x 500 x 265 mm 207.45
Overall Height 890 mm
Min Working Capacity 48 Litres
Max Working Capacity 55 Litres
Pump Output 205 Litres/Hour
Motor 230 Volt 45 Watt
Weight 35 kg
High Capacity Cleaning Tanks
Sealey brand. Heavy duty one-piece tank with triple
baked enamel finish. Features include
• Fully sealed electric motor with magnetic drive pump
unit
• Circulating fluid is filtered before entering the pump
• Replaceable filter
• Flexible metal fluid delivery pipe
• Supplied with removable shelf and parts basket
• Supplied with metal stand with integral storage shelf
• Self-latching, fusible linked fire lid
SM 30 Cleaning Tank
Stock No Tank Dimensions (L x W x H) Price
333174 885 x 510 x 265 mm 295.96
Overall Height 890 mm
Min Working Capacity 45 Litres
Max Working Capacity 63 Litres
Pump Output 200 Litres/Hour
Motor 230 Volt 70 Watt
Weight 35 kg
CONTINUED >

194
CLEANING TANKS/SHOT BLASTING GUNS
High Capacity Cleaning Tanks CONTINUED >
SM 40 Cleaning Tank
Stock No Tank Dimensions (L x W x H) Price
333176 1070 x 510 x 270 mm 319.96
Overall Height 890 mm
Min Working Capacity 55 Litres
Max Working Capacity 75 Litres
Pump Output 300 - 480 Litres/Hour
Motor 230 Volt 70 Watt
Weight 42 kg
SM 40D Extra Deep Cleaning Tank
Stock No Tank Dimensions (L x W x H) Price
333178 929 x 568 x 402 mm 403.95
Overall Height 1035 mm
Min Working Capacity 91 Litres
Max Working Capacity 136 Litres
Pump Output 300 Litres/Hour
Motor 230 Volt 70 Watt
Weight 44 kg
Air Operated Cleaning Tank
Sealey brand. Heavy duty one-piece steel tank. Features
include
• Fully sealed, air operated pump unit
• Safer for use in hazardous environments, due to the
absence of electricity
• Flexible metal fluid delivery tube
• Supplied with removable shelf and parts basket
• Supplied with metal stand with integral storage shelf
• Fitted with air blow gun for fast drying of workpiece
• Self-latching, fusible linked fire lid
SM 22 Air Operated Cleaning Tank
Stock No Tank Dimensions (L x W x H) Price
333180 730 x 500 x 265 mm 279.96
Overall Height 890 mm
Min Working Capacity 48 Litres
Max Working Capacity 55 Litres
Pump Output 205 Litres/Hour
Working Pressure 90 psi
Air Consumption 6 cfm
Weight 32 kg
High Capacity Air Operated Cleaning Tanks
Sealey brand. Heavy duty one-piece steel tank. Features
include
• Fully sealed, air operated pump unit
• Safer for use in hazardous environments, due to
absence of electricity
• Flexible metal delivery tube
• Turbo action. Air flow through tank produces agitation
to help shift stubborn grease and dirt
• Controls for adjustment of pump speed and turbo
action
• Supplied with removable shelf and parts basket
• Supplied with metal stand with integral storage shelf
• Fitted with air blow gun for fast drying of workpiece
• Self-latching, fusible linked fire lid
SM 221 Air Operated Cleaning Tank
Stock No Tank Dimensions (L x W x H) Price
333182 890 x 510 x 265 mm 319.96
Overall Height 890 mm
Min Working Capacity 45 Litres
Max Working Capacity 70 Litres
Pump Output 300 Litres/Hour
Working Pressure 65-125 psi
Air Consumption 8-10 cfm
Weight 35 kg
SP 223 Air Operated Cleaning Tank
Stock No Tank Dimensions (L x W x H) Price
333184 1070 x 510 x 265 mm 343.96
Overall Height 890 mm
Min Working Capacity 55 Litres
Max Working Capacity 85 Litres
Pump Output 300 Litres/Hour
Working Pressure 65-125 psi
Air Consumption 8-10 cfm
Weight 42 kg
Degreasing Solvent
Sealey brand. Water soluble, degreasing solvent for use
in cleaning tanks. Also suitable for engine cleaning.
Stock No Size Price
333188 25 Litres 94.36
Flow Through Parts Cleaning Brush
Sealey brand. Supplied with a length of hose that
connects to the spout of cleaning tanks to allow a stream
of fluid to pass through the bristles
Stock No Description Price
333190 Cleaning Brush 17.56
Parts Cleaning Brush
Draper brand. Plastic handle with solvent resistant bristle
head. For applying water soluble degreasing solvents.
Also suitable for applying cutting oils
Stock No Head Diameter Price
331390 25 mm 2.34
Stock No 333182
Degreasing Solvent
Sealey brand. Degreasing solvent for use in cleaning
tanks.
Stock No Size Price
333186 25 Litres 79.96
Sealey cleaning tanks are not suitable for use with air
drying solvents, use Sealey or other proprietary cleaning
fluids.
Shot Blasting Guns
Sealey brand. Hand held shot blasting guns with pot
containers. For cleaning small areas such as wheels or
chassis members. Available in standard or economy
versions. The economy version features a reduced
diameter nozzle for use on smaller compressors.
Standard Shot Blasting Gun
Stock No Nozzle Diameter Air Pressure Price
333192 6 mm 90 - 120 psi 31.96
Air Consumption 14 - 18 cfm
Economy Shot Blasting Gun
Stock No Nozzle Diameter Air Pressure Price
333194 4.5 mm 90 - 110 psi 27.16
Air Consumption 10 - 16 cfm

SHOT BLASTING 195
Shot Blasting Guns
Sealey brand. Hand held shot blasting guns with bulk
pick-up. Suitable for cleaning larger areas. Will accept a
variety of abrasives, including sand, chilled iron grit and
synthetic grit. Available in standard or economy versions.
The economy version features a reduced diameter nozzle
for use on smaller compressors.
Standard Shot Blasting Gun
Stock No Nozzle Diameter Air Pressure Price
333196 6 mm 90 - 120 psi 31.96
Air Consumption 14 - 18 cfm
Hose Length 1.2 metres
Economy Shot Blasting Gun
Stock No Nozzle Diameter Air Pressure Price
333198 4.5 mm 90 - 110 psi 27.16
Air Consumption 10 - 16 cfm
Hose Length 2 metres
Recirculating Sandblasting Gun
Sealey brand. For hobbyist and body shop use. Features
forced air powered grit recirculating system with
collection bag enabling grit to be reused. Suitable for
treating stone chips and for removing paint and rust.
Supplied as a kit with four shaped nozzles and 700 g of
synthetic grit.
Forced Air Sandblasting Gun
Stock No Air Pressure Air Consumption Price
333402 90 - 100 psi 12 - 15 cfm 71.96
Cup Capacity 1 kg
Max Blast Diameter 21 mm
Replacement Nozzles. Also fit Draper recirculating
sandblasting gun.
Stock No Description Price
333404 Set (4) Contoured Nozzles 11.96
Workshop Shot Blasters
Sealey brand. All-steel container with 3 metre rubber
hose, in-line water trap for moisture free grit blasting,
bayonet air line coupling, tungsten carbide delivery
nozzle and full set of instructions. Suitable for stripping
rust and paint from wheels, chassis and panels.
SB 990 Shot Blaster. Hand portable unit
Stock No Air Pressure Air Consumption Price
333410 15 - 125 psi 8 cfm 359.96
Tank Capacity 12 kg
Grit Size 250 - 800 microns
Max Grit Consumption 35 kg/hour
SB 991 Shot Blaster. Wheel mounted unit with
adjustable grit flow valve.
Stock No Air Pressure Air Consumption Price
333412 15 - 125 psi 8 cfm 455.96
Tank Capacity 12 kg
Grit Size 30 - 800 microns
Max Grit Consumption 35 kg/hour
Shot Blasting Hopper Kit
Sealey brand. Compact and portable shot blasting kit.
Large capacity hopper with convenient carry handle and
integral hose storage. Supplied complete with hose and
heavy duty sandblast gun.
Stock No Air Pressure Air Consumption Price
333400 90 - 110 psi 11 - 14 cfm 55.96
Hopper Capacity 22 kg
Hose Length 4.5 Metres
Recirculating Sandblasting Gun
Draper brand. For hobbyist and body shop use. Fitted with
collection bag enabling grit to be reused. Suitable for
treating stone chips and for removing paint and rust.
Supplied as a kit with four shaped nozzles and 700g of
synthetic grit.
Stock No Air Pressure Air Consumption Price
331500 90 - 100 psi 10 - 14 cfm 48.42
Cup Capacity 1 kg
Max Blast Diameter 18 mm
Shot Blasting Grit
Synthetic grit for use in hand-held standard and
recirculating shot blasting guns. Complies with COSHH
SI-1657-1988.
Stock No Container Weight Price
150120 Pot 700 g 4.94
333405 Bag 25 kg 14.36
Shot Blasting Gauntlets
Sealey brand. CE Approved protection for hands and
wrists when using shot blasters.
Stock No Cuff Length Price
333406 18" 450 mm 11.96
333408 23" 580 mm 14.36
Stock No 333400
Shot Blasting Cabinets
Sealey brand. Steel cabinets with replaceable viewing
screen and internal low voltage lighting. Fitted with shot
blasting gun and heavy gauntlets for hand protection.
Suitable for glass beads, silicon carbide, aluminium oxide
and silica sand.
SB 951 Shot Blasting Cabinet
Stock No Air Pressure Air Consumption Price
333414 90 psi 12 cfm 175.96
Capacity 0.09 m 3
Height 490 mm
Width 580 mm
Depth 480 mm
Door Size 580 x 500 mm
Visor Size 480 x 380 mm
SB 972 Shot Blasting Cabinet
Stock No Air Pressure Air Consumption Price
333416 80 psi 13 cfm 343.96
Capacity 0.19 m 3
Height 710 mm
Width 760 mm
Depth 510 mm
Door Size 770 x 440 mm
Visor Size 550 x 260 mm
SB 972/ST Leg Stand
Stock No Description Price
333418 Floor Stand for SB 972 59.16

196
SHOT BLASTING/ENGINE CLEANING & SEALING
Free Standing Shot Blasting Cabinets
Sealey brand. Heavy duty steel cabinets with toughened
glass viewing screen and internal low voltage lighting.
Fitted with shot blasting gun complete with three spare
ceramic nozzles, heavy gauntlets for hand protection and
64 mm dust extraction port to aid clear viewing. Suitable
for glass beads, aluminium oxide and silica sand.
Supplied with pack of ten visor covers.
SB 973 Shot Blasting Cabinet. With large single
side door
Stock No Air Pressure Air Consumption Price
333420 40 - 80 psi 14 cfm 455.96
Capacity 0.18 m 3
Overall Height 1300 mm
Width 860 mm
Depth 630 mm
Visor Size 580 x 270 mm
SB 974 Shot Blasting Cabinet. Two large side
doors provide easy access for bulkier items.
Stock No Air Pressure Air Consumption Price
333422 40 - 80 psi 18 cfm 583.96
Capacity 0.33 m 3
Overall Height 1500 mm
Width 950 mm
Depth 730 mm
Visor Size 580 x 270 mm
Water Wash Gun
SIP Brand. Air powered high pressure water gun which
dramatically increases the power of a standard water
hose. Fitted with spray regulator.
Stock No Air Pressure Air Consumption Price
338000 90 psi 8 cfm 11.22
Engine Cleaning Gun
SIP brand. Compact design. Ideal for cleaning and
degreasing. Polished gun body with stainless steel
container; hard wearing for extended working life.
Stock No Air Pressure Capacity Price
338002 30 - 90 psi 750 cc 17.19
Air Caulking Gun
Draper brand. Accepts standard 215 x 50 mm cartridges.
Stock No Air Pressure Air Inlet Price
331510 30 - 60 psi 1
⁄4" BSP 18.00
Professional Air Caulking Gun
Sealey brand. Accepts standard 215 x 50 mm cartridges
and sausage packs up to 400 g. Patented telescopic
piston prevents air mixing with material. Fast air exhaust
provides instant shut down of feed when trigger is
released.
Stock No Air Pressure Air Inlet Price
333430 90 - 110 psi 1
⁄4" BSP 114.95
Shot Blasting Glass Beads
Sealey brand. Glass beads for use in shot blasting
cabinets. Bead size varies from 177 to 297 microns.
Stock No Container Weight Price
333424 Tub 5 kg 31.16
Underbody Seal Guns
SIP brand. Accepts standard 1 litre canisters. Ideal for
fast application of undersealants. Quickly disassembles
for fast clean up.
Stock No Air Pressure Air Consumption Price
338004 85 - 115 psi 6 cfm 19.18
Maxi Coat T Underbody Gun. Features extended
flexible nozzle for application inside box sections and
panels.
Stock No Air Pressure Air Consumption Price
338006 85 - 115 psi 6 cfm 13.40
Air Duster Gun
SIP brand. For rapid cleaning of dust, swarf and liquid.
Supplied with standard and 50 mm nozzles.
Stock No Air Pressure Air Inlet Price
338008 30 - 90 psi 1
⁄4" BSP 9.99
Paraffin Spray Gun
Draper brand. Suitable for spraying a wide range of oils,
cleaning agents and rustproofing liquids. Fitted with
adjustable nozzle.
Stock No Air Pressure Capacity Price
150030 40 - 140 psi 1 litre 8.80
Wax Injector Gun
Sealey brand. Air powered gun, suitable for proprietary
brands of wax rust inhibitor. Supplied with nozzle for
surface application and 940 mm flexible delivery tube for
cavities. A 600 mm rigid delivery tube is an optional extra.
Stock No Description Price
333426 Wax injector Gun 45.96
333428 600mm Rigid Delivery Tube 28.76
Air Blow Gun
Draper brand. For rapid cleaning of dust, swarf and liquid.
Supplied with standard (single hole) and pepperpot
(multi-hole) nozzles.
Stock No Air Pressure Air Inlet Price
159140 40 - 90 psi 1
⁄4" BSP 4.05
Stock No 333430

AIR PUMPS & GAUGES 197
Long Reach Air Blow Guns
Foot Pump
Tyre Pressure Gauge
Draper brand. For rapid cleaning of dust, swarf and liquid.
Nylon body and trigger. Long reach lance with safety
nozzle. Air inlet 1 ⁄4" BSP.
Stock No Air Pressure Lance Length Price
150008 40 - 90 psi 100 mm 5.60
150010 40 - 90 psi 250 mm 5.60
150012 40 - 90 psi 325 mm 6.64
150014 40 - 90 psi 500 mm 7.20
Draper brand. High performance single cylinder foot
pump. Supplied with integral pressure gauge, 450 mm
delivery tube, thumb lock connector for car and motor
cycle tyres, plastic adaptor for inflatables such as air
beds, needle valve for footballs and screw-on adaptor for
Woods valves on bicycles.
Stock No Pressure Gauge Range Price
331350 0 - 100 psi 0 - 7 bar 10.88
Draper brand. Manufactured to BS 4613 Part 3
specification. Pencil type gauge with valve remover and
pocket clip. Zinc plated with polished finish. Dual
graduations.
Stock No Range Graduations Price
331210 0 - 50 psi 1 psi 4.96
0.4 - 3.4 bar 0.1 bar
Tyre Inflator
SIP brand. General purpose tyre inflator with gauge.
Rubber protected pressure gauge. Flexible hard wearing
hose. Robust thumb connector.
Stock No Pressure Range Supply Pressure Price
338010 0 - 180 psi 115 psi 15.59
Double Cylinder Foot Pump
Draper brand. Manufactured to GS specifications. High
performance double cylinder foot pump with fast air
delivery. Robust, all-metal design with 4 mm thick steel
frame. Supplied with integral pressure gauge and 600 mm
delivery tube with thumb lock connector. Will inflate car
and motor cycle tyres, bicycle tyres with Woods valves,
footballs and inflatables such as air beds.
Stock No Pressure Gauge Range Price
331530 0 - 100 psi 0 - 7 bar 19.50
Tyre Pressure Gauge
Draper brand. Manufactured to EN 12645: 1968
specification. Dial gauge with flexible 250 mm long hose.
Swivel angled tyre connection with air release valve for
fine adjustment of pressure. Dual graduations.
Stock No Range Graduations Price
331215 0 - 100 psi 2 psi 9.80
0 - 7 bar 0.1 bar
Maxi Tyre Inflator
SIP brand. Professional quality tyre inflator with gauge.
Heavy duty construction, suitable for all forecourt and
workshop applications. Gauge protected with shock
resistant rubber casing. Tough, flexible hose. Hard
wearing thumb connector.
Stock No Pressure Range Supply Pressure Price
338012 0 - 180 psi 115 psi 43.98
PCL Tyre Inflator
Manufactured by PCL Air Technology. Industrial quality
with twin open-ended hold on connector. Suitable for use
on garage forecourts and tyre fitting bays. Conforms to
EC Directive 86/217. Supplied with calibration certificate.
Tyre Inflator
Stock No Pressure Range Supply Pressure Price
331520 0 - 140 psi 100 - 200 psi 46.90
Replacement Parts
Stock No Description Price
331521 Hose and Connector 23.95
331522 Connector 11.66
Heavy Duty Hand Pump
Draper brand. Features include stainless steel barrel,
hardwood handle and 900 mm delivery tube with thumb
lock connectors. Diecast base incorporates foot rests for
stability and dial pressure gauge. Suitable for cars, vans,
motorcycles and bicycles.
Stock No Pressure Gauge Range Price
331535 0 - 160 psi 0 - 11 bar 36.26
Digital Tyre Pressure Gauge
Draper brand. Handy size, lightweight tool, for use on
cars, motor cycles and bicycles. Features include
• Self calibration
• Low power consumption
• Auto power off
• Dual reading
• 3 Volt lithium battery included
Stock No Range Accuracy Price
331220 0 - 60 psi 1 psi 9.79
0.05 - 5 bar 0.1 bar
Digital Tyre Pressure Gauges
SIP brand. With accurate, easy to read, digital, LED
displays. Three models available. Features include
• Rubber shroud with good shock absorbency
• Extended battery life, 3000 testing cycles
• Pressure release valve for fine adjustment of pressure
• Dual reading
Stock No Range Resolution Price
338014 0 - 100 psi 0.5 psi 15.29
0 - 7 bar 0.05 bar
CONTINUED >

198
SPRAY GUNS
Digital Tyre Pressure Gauges CONTINUED >
Digital Pressure Gauge. With 230 mm hose and
push-on connector
Stock No Range Resolution Price
338016 0 - 100 psi 0.5 psi 15.29
0 - 7 bar 0.05 bar
Digital Pressure Gauge. With 230 mm hose and
twin hold-on connectors
Stock No Range Resolution Price
338018 0 - 100 psi 0.5 psi 17.49
0 - 7 bar 0.05 bar
SIP Spray Gun
General purpose, suction feed spray gun for the semiprofessional
user. Features include
• Adjustable fluid flow
• Adjustable fan width
• Complete with cleaning brush and air inlet adaptor
• Nozzle size 1.5 mm
• Container size 750 cc
Stock No Air Pressure Air Consumption Price
152400 65 - 85 psi 4 - 7 cfm 18.38
SIP Professional Gravity Feed Spray Gun
Lightweight, gravity feed, industrial quality, spray gun.
Equal fluid atomisation creates professional results for all
finishing applications. Features include
• Gravity feed - extremely efficient paint use
• Stainless steel nozzle and needle
• Adjustable fluid flow
• Ergonomically designed, adjustable fan width
• Nozzle size 1.4 mm
• Container size 0.6 litres
Stock No Air Pressure Air Consumption Price
152415 30 - 50 psi 6 - 12 cfm 39.18
Low Pressure Spray Gun
Draper brand. Low pressure, suction feed spray gun
designed for use with small compressors with limited air
delivery. Features include
• Adjustable fluid flow
• Adjustable fan width
• Low air consumption
• Nozzle size 1.2 mm
• Container size 1 litre
Low Pressure Spray Gun
Stock No Air Pressure Air Consumption Price
152500 10 - 35 psi 2.5 - 6.5 cfm 34.78
Nozzle Assemblies. Replacement nozzle assemblies
with variety of nozzle sizes. Assembly comprises air cap,
needle valve and tip.
Stock No Nozzle Size Price
152505 0.3 mm 11.25
152510 0.5 mm 11.25
152515 0.7 mm 11.25
152520 1.0 mm 11.25
152525 1.2 mm 11.25
Spare Container
Stock No Capacity Price
152530 1 litre 8.62
SIP Professional Spray Gun
High quality, all purpose, suction feed spray gun.
Features include
• Adjustable fluid flow
• Adjustable fan width
• Easy disassembly for speedy cleaning
• Supplied with cleaning brush and air inlet adaptor
• Nozzle size 2.0 mm
• Container size 1 litre
Stock No Air Pressure Air Consumption Price
152418 65 - 85 psi 5 - 9 cfm 18.38
SIP Pressure Feed Spray Gun Kit
Professional quality, pressure feed, spray gun head
complete with connecting hoses and pressure pot with
pressure gauge. Suitable for large areas and production
spraying. Pressure pot capacity is two litres. Higher
capacity pressure paint containers are available.
Pressure Feed Spray Gun Kit
Stock No Air Pressure Air Consumption Price
152420 40 - 60 psi 6 - 12 cfm 106.79
Large Capacity Pressure Paint Pots.
Alternatives to the 2 litre standard pressure pot.
Complete with pressure regulator and paint stirrer.
Stock No Capacity Air Pressure Price
152425 15 litres 50 - 60 psi 424.59
152430 30 litres 50 - 60 psi 575.83
SIP Spray Gun
General purpose, constant bleed spray gun. Features
include
• Can be used with receiver-less compressors
• Fluid inlet filter reduces need for cleaning
• Supplied with three nozzles; 1.3 mm standard, fan and
angled fan
• Supplied with cleaning brush, air inlet adaptor and
multi-size spanner
• Container size 750 cc
Stock No Air Pressure Air Consumption Price
152402 45 - 65 psi 3 - 5 cfm 39.98
SIP Professional Spray Gun
Lightweight, superbly balanced, suction feed, industrial
quality, spray gun. Equal fluid atomisation creates
professional results for all finishing applications. Features
include
• Stainless steel nozzle and needle
• Adjustable fluid flow
• Adjustable fan width
• Cam action locking cap
• Two nozzle sizes
• Container size 1 litre
• Air consumption 7 - 12 cfm
Stock No Nozzle Size Air Pressure Price
152405 1.4 mm 60 - 85 psi 38.79
152410 1.8 mm 60 - 85 psi 38.79
SIP HVLP Spray Gun
High volume, low pressure, suction feed, professional
spray gun. Features include
• Better paint coverage with vastly reduced bounce
back
• Stainless steel nozzle and needle
• Adjustable fluid flow
• Ergonomically designed, adjustable fan width
• Cam action locking cap
• Nozzle size 1.8 mm
• Container size 1 litre
Stock No Air Pressure Air Consumption Price
152435 35 - 50 psi 8 - 14 cfm 79.98
All prices and descriptions correct at time of publication and are subject to change without notice
All prices are in pounds sterling and exclude VAT

SPRAY GUNS 199
SIP HVLP Gravity Feed Spray Gun
High volume, low pressure, gravity feed, professional
spray gun. Features include
• Gravity feed, extremely efficient paint use
• Better paint coverage with vastly reduced bounce
back
• Stainless steel nozzle and needle
• Adjustable fluid flow
• Regulator gauge aids fast easy adjustment of air flow
• Nozzle size 1.4 mm
• Container size 0.6 litres
Stock No Air Pressure Air Consumption Price
152440 30 - 50 psi 8 - 20 cfm 43.18
Sealey Spray Gun
Professional quality, suction feed, spray gun;
competitively priced for the smaller paint shop. Features
include
• Adjustable fluid flow
• Adjustable fan width
• Range of nozzle sizes available
• Container size 1 litre
• Air consumption 5 - 9 cfm
Stock No Nozzle Size Air Pressure Price
152600 1.2 mm 40 - 60 psi 39.95
152605 1.5 mm 40 - 60 psi 39.95
152610 1.8 mm 40 - 60 psi 39.95
152615 2.0 mm 40 - 60 psi 39.95
Stock number 152605 with the 1.5 mm nozzle is the
standard set-up and the model we keep in stock
Draper Air Brush Set
Hobbyist air brush set for detailed and intricate paint
work. Spray pattern adjustable from 3 to 50 mm.
Stock No Air Pressure Price
150020 15 - 50 psi 9.60
SIP Touch Up Gun
Lightweight, suction feed, industrial quality, spray gun.
Creates professional results on the most intricate of
touch up work. Features include
• Stainless steel nozzle and needle
• Adjustable fluid flow
• Adjustable fan width
• Cam action locking cap
• Nozzle side 1.5 mm
• Container size 0.2 litres
Stock No Air Pressure Air Consumption Price
152445 40-50 psi 6-8 cfm 23.59
Sealey HVLP Spray Gun
High volume, low pressure, suction feed, professional
spray gun. Suitable for heavy commercial use. Has all the
features of a top of the range HVLP spray gun. In
addition, the paint suction pick-up system is
supplemented by a positive pressure feed into the paint
pot. Combining suction and pressure gives a very smooth
fluid flow. Three nozzle sizes available. Air consumption
19 cfm.
Stock No Nozzle Size Air Pressure Price
152620 0.8 mm 50 psi 124.95
152625 1.0 mm 50 psi 124.95
152630 1.4 mm 50 psi 124.95
SIP Air Brush Set
Trade air brush set for detailed and intricate paint work.
Adjustable spray pattern. Suitable for large scale
working. Supplied in a fitted carrying/storage case.
Stock No Air Pressure Price
152455 15 - 50 psi 39.18
Air Tool Kit
SIP hobbyist air tool set. Contents are
• Spray gun
• Paraffin/washing gun
• Blow gun
• Tyre inflator with gauge (0 - 220 psi)
• Recoil air hose
Stock No Description Price
152460 5 pce Air Tool Kit 42.38
SIP Professional Spray Gun Kit
Industrial quality spray gun set supplied in a blow
moulded carrying/storage case. Contents are
• Professional spray gun, stock number 152405
• Professional touch-up gun, stock number 152445
• Spare 1.4 mm nozzle for spray gun
• Spare 1.8 mm nozzle for spray gun
• Quick coupling connectors
Stock No Description Price
152450 7 pce Spray Gun Kit 69.19
Sealey HVLP Pressure Feed Spray Gun Kit
Professional quality, high volume, low pressure, pressure
feed, spray gun head complete with connecting hoses
and pressure pot. Suitable for heavy commercial use.
Pressure pot capacity is two litres. Three nozzles sizes
available. Air consumption 12 cfm. Components available
separately.
HVLP Pressure Pot System
Stock No Nozzle Size Air Pressure Price
152635 0.8 mm 50 - 78 psi 207.96
152640 1.0 mm 50 - 78 psi 207.96
152645 1.4 mm 50 - 78 psi 207.96
HVLP Pressure Pot System Components
Stock No Description Price
152650 Spray Gun Head 95.96
152655 Connecting Hoses 29.56
152660 Pressure Pot 87.96
Spray Gun Cleaning Kit
SIP universal cleaning kit, suitable for all types of spray
guns and airbrushes using all types of thinners and
cleaning agents. Contents are
• 5 assorted brushes
• 1 nozzle needle file
• 5 wooden picks
• 1 pot of lubricant
Stock No Description Price
152465 12 pce Spray Gun Cleaning Kit 9.19

200
GUN CLEANING/DAMAGE METER/
MASKING PAPER/PAINT DRYERS
Spray Gun Cleaning Tanks
Sealey brand. Air operated cleaning tanks with fully
automatic operation; close lid to start and open lid to
stop. Suitable for premises covered by H&SE regulations
and does not require fume extraction systems. Supplied
with air regulator, pressure gauge, filter and lubricator.
SM24/1 Spray Gun Cleaner. One gun capacity
Stock No Air Pressure Air Consumption Price
152670 20 - 50 psi 2 - 4 cfm 559.96
Height 1300 mm
Width 450 mm
Depth 430 mm
SM23/2 Spray Gun Cleaner. Two gun capacity
Stock No Air Pressure Air Consumption Price
152675 20 - 50 psi 2 -4 cfm 639.96
Height 1300 mm
Width 470 mm
Depth 572 mm
Thinners Pumps
Sealey brand. Nylon piston pump suitable for cellulose
thinners, gun wash and industrial solvents. A universal
adaptor is available to fit drums with pouring spout.
Nylon Piston Pumps
Stock No Drum Capacity Delivery Price
333432 25 litres 250 ml/stroke 27.96
333434 205 litres 250 ml/stroke 35.96
Universal Adaptor
Stock No Description Price
333436 Universal Drum Closure Adaptor 5.96
Panel Damage Meter
Sealey brand. Fast and efficient detection of crash and
other panel damage repairs including thick paint, fillers
and deep rust. Three coloured LEDs indicate paint
thickness and presence of filler. Not suitable for
aluminium or non-metallic panels.
Stock No Description Price
333440 Crash Check Panel Damage Meter 97.45
Masking Paper Dispenser
Sealey brand. Single roll dispenser. Can be stood on a
bench or mounted on a wall. Automatically applies
adhesive tape to edges of masking paper.
Stock No Capacity Price
333442 1 x 450 mm Paper Roll 47.96
Paper and tape not included
Masking Paper Dispenser Trolleys
Professional Masking Paper Trolley
Sealey brand. Heavy duty trolley with five station masking
paper dispenser. Includes spring-loaded cutter bar on all
stations. Automatically applies adhesive tape to edge of
masking paper. Refuse sack holder at one end of the
trolley and paper towel dispenser at other end of the
trolley. Shelf fitted on top of dispenser unit.
Stock No Capacity Price
333448 1 x 150, 300, 450, 600, 900 mm Rolls 401.45
Paper and tape not included
Portable Paint Dryer
Sealey brand. Portable heater for small repair areas.
Medium wave strip type emitter. Utilises very narrow
bandwidth resulting in more effective panel heating and
reduced drying times.
Stock No Power Voltage Price
333450 1000 W 230 V 399.95
Nitrile Gauntlets
Sealey brand. Heavy duty gauntlets designed to cope
with thinners and similar aggressive liquids. CE marked
and manufactured to CAT 3 BSEN 338, 407 and 374
Stock No Description Price
Sealey brand. Two roll dispensers. Features storage tray
underneath dispenser unit. Automatically applies
adhesive tape to edges of masking paper.
MK 66 Masking Paper Dispenser
Stock No Capacity Price
333444 2 x 450 mm Paper Rolls 59.16
MK 67 Masking Paper Dispenser
Stock No Capacity Price
333446 2 x 900 mm Paper Rolls 79.96
Paper and tape not included
Paint Dryer
Sealey brand. Quartz, medium wave panel dryer fitted
with one 1500 Watt element and 30 minute timer control.
The drying element is adjustable for height and stand is
mounted on castors for ease of movement.
Stock No Power Voltage Price
333452 1500 W 230 V 624.95
333438 Pair of Nitrile Gauntlets 3.56 Trade Counter open 8.00 am - 5.30 pm Monday to Friday and 8.30 am - 1.00 pm Saturday

MECHANICS CREEPERS/BATTERY CHARGERS 201
Mechanics Creepers/Seats
Paint Dryer
Sealey brand. Quartz, medium wave panel dryer fitted
with two 1500 Watt elements, each fitted with an
independent 30 minute timer control. The drying elements
are adjustable for height and stand is mounted on castors
for ease of movement.
Stock No Power Voltage Price
333454 3000 W 230 V 959.95
Sealey brand. Heavy steel framework with powder-paint
finish. Fitted with easy rolling 60 mm diameter composite
castor wheels with ball bearing swivels. Padded, vinyl
covered back and head rests. Split back design permits
dual application as flat creeper or folded up as a
mechanics seat. Supplied flat and converts to seat mode
in seconds. No tools required.
SCR 78 Mechanics Creeper/Seat
Stock No Length No. of Wheels Price
333460 1010 mm 6 51.16
SCR 79 Mechanics Creeper/Seat. With five
position adjustable head/back rest.
Stock No Length No. of Wheels Price
333462 1200 mm 7 61.96
Protective Seat Cover
Draper brand. Heavy duty, universal fitting cover for
single seats. Waterproof and resistant to mud, paint, oil
and grease. Velcro securing straps and elasticated skirt
to fit seat base.
Stock No Size Price
331560 Protective Seat Cover 19.21
Mechanics Creeper
Draper brand. Rigid PVC construction with multi
directional castors for easy movement. Moulded back for
user comfort.
Stock No Length No. of Wheels Price
331540 935 mm 6 25.41
Mechanics Creepers
Sealey brand. Heavy steel framework with powder-paint
finish. Easy rolling 60 mm diameter composite castor
wheels with ball bearing swivels. Vinyl covered back and
head rests.
SCR 75 Mechanics Creeper.
Stock No Length No. of Wheels Price
333456 920 mm 6 41.56
SCR 74 Mechanics Creeper. With adjustable head
rest.
Stock No Length No. of Wheels Price
333458 1020 mm 6 45.56
Mechanics Seat
Draper brand. Powder coated steel frame with padded
vinyl covered seat and tool storage tray underneath.
Fitted with four swivel castors.
Stock No Description Price
331545 Roller Seat 23.44
Foam Mats
Draper brand. Ideal for working under and alongside
vehicles. Oil and water resistant.
Kneeler Mat
Stock No Size Price
331550 336 x 220 mm 9.42
Full Length Mat
Stock No Size Price
331555 980 x 380 mm 24.43
Battery Chargers
Draper brand battery charger and tester. For DIY/home
use. For conventional lead acid batteries only. Features
include
• Manufactured to CE directives
• LED battery condition tester
• LED charging status display
• Polarity inversion protection
• Thermal overload protection
• Insulated copper leads and battery clips
12 Volt 4.5 Amp Battery Charger
Stock No Input Voltage Charging Steps Price
331570 230 V 1 24.00
Effective Charging Current 4.5A
EN 60335 Charging Current 3A
6/12 Volt 4.5 Amp Battery Charger
Stock No Input Voltage Charging Steps Price
331575 230 V 1 24.30
Effective Charging Current 4.5A
EN 60335 Charging Current 3A
12 Volt 6 Amp Battery Charger
Stock No Input Voltage Charging Steps Price
331580 230 V 2 26.00
Effective Charging Current 6 A (Fast Charge)
EN 60335 Charging Current 4 A (Fast Charge)
12 Volt 12 Amp Battery Charger
Stock No Input Voltage Charging Steps Price
331585 230 V 2 39.00
Effective Charging Current 12 A (Fast Charge)
EN 60335 Charging Current 8 A (Fast Charge)
Stock No 333456

202
BATTERY CHARGERS
Automatic Battery Charger
Draper brand battery charger and tester. For DIY/home
use. Automatically reverts to safe trickle mode when
battery is fully charged. Features include
• Suitable for lead acid and maintenance-free batteries
• Manufactured to CE directives
• LED battery condition tester
• LED charging status display
• Polarity inversion protection
• Thermal overload protection
• Insulated copper leads and battery clips
12 Volt 8 Amp Battery Charger
Stock No Input Voltage Charging Steps Price
331590 230 V Automatic 34.00
Effective Charging Current 8 A
EN 60335 Charging Current 5.5 A
Intelligent Battery Charger
Draper brand. For DIY/home and light workshop use.
During charging, intelligent circuitry monitors battery
condition and delivers appropriate level of charge. The
charger can be left connected to a fully charged battery
to maintain the battery in optimum condition. Features
include
• Suitable for lead acid, maintenance-free and gel filled
batteries
• Manufactured to CE directives
• LED charging status display
• Polarity inversion protection
• Audible polarity protection
• Thermal overload protection
• Insulated copper leads and battery clips
12 Volt 6 Amp Battery Charger
Stock No Input Voltage Charging Steps Price
331595 230 V Automatic 44.10
Effective Charging Current 6 A
EN 60335 Charging Current 4 A
Stock No 331625
Battery Starter/Charger
Draper brand battery starter/charger and tester. For
home and workshop use. Suitable for lead acid batteries
only. Features include
• Heavy duty 60 amp engine start facility
• Manufactured to CE directives
• LED battery condition tester
• LED charging status display
• Polarity inversion protection
• Thermal overload protection
• Insulated copper leads and battery clips
12 Volt 60 Amp Battery Starter/Charger
Stock No Input Voltage Charging Steps Price
331600 230 V 2 70.00
Engine Starting Current 60 A
Effective Charging Current 26 A
EN 60335 Charging Current 17 A
Weight 4.5 kg
Workshop Battery Chargers
Draper brand. For garage and workshop use. Features
include
• Manufactured to CE directives
• Easy-to-read ammeter
• Polarity inversion protection
• Thermal overload protection
• Carrying handle
12/24 Volt 15.5 Amp Battery Charger
Stock No Input Voltage Charging Steps Price
331605 230 V 2 58.50
Effective Charging Current 15.5 A
EN 60335 Charging Current 10 A
Weight 5 kg
Stock No Description Price
331610 Spare Fuse 15 A 1.66
12/24 Volt 20 Amp Battery Charger
Stock No Input Voltage Charging Steps Price
331615 230 V 4 103.50
Effective Charging Current 20 A
EN 60335 Charging Current 13 A
Weight 11 kg
Stock No Description Price
331620 Spare Fuse 20 A 1.66
Workshop Battery Starter/Chargers
Draper brand. For garage and workshop use. Features
include
• Manufactured to CE directives
• Easy-to-read ammeter
• Polarity inversion protection
• Thermal overload protection
• Carrying handle
12/24 Volt 200 Amp Battery Starter/Charger
Stock No Input Voltage Max Power Input Price
331625 230 V 6.5 kw 85.50
Engine Starting Current 200 A
Effective Charging Current 24 A
EN 60335 Charging Current 20 A
Weight 10 kg
Stock No Description Price
331630 Spare Fuse 80 A 2.89
12/24 Volt 300 Amp Battery Starter/Charger
Stock No Input Voltage Max Power Input Price
331635 230 V 8 kw 148.66
Engine Starting Current 300 A
Effective Charging Current 32 A
EN 60335 Charging Current 28 A
Weight 12.8 kg
Stock No Description Price
331640 Spare Fuse 50 A 2.89
12/24 Volt 400 Amp Battery Starter/Charger
Stock No Input Voltage Max Power Input Price
331645 230 V 8.4 kw 125.10
Engine Starting Current 400 A
Effective Charging Current 38 A
EN 60335 Charging Current 34 A
Weight 14.8 kg
Stock No Description Price
331640 Spare Fuse 50 A 2.89
Workshop Battery Starter/Chargers With Trolley
Draper brand. For garage and workshop use. Features
include
• Manufactured to CE directives
• Easy-to-read ammeter
• Polarity inversion protection
• Thermal overload protection
• Trolley wheels for easy transportation
12/24 Volt 400 Amp Battery Starter/Charger
Stock No Input Voltage Max Power Input Price
331650 230 V 8.4 kw 187.20
Engine Starting Current 400 A
Effective Charging Current 38 A
EN 60335 Charging Current 34 A
Weight 16 kg
CONTINUED >

BATTERY EQUIPMENT 203
Workshop Battery Starter/Chargers with Trolley CONTINUED >
Road Side Power Packs CONTINUED > Booster Cables CONTINUED >
Stock No Description Price
331640 Spare Fuse 50 A 2.89
12/24 Volt 650 Amp Battery Starter/Charger.
Features remote start facility and fast charge timer.
Stock No Input Voltage Max Power Input Price
331655 230 V 15 kw 324.00
Engine Starting Current 650 A
Effective Charging Current 66 A
EN 60335 Charging Current 60 A
Weight 24 kg
Stock No Description Price
331660 Spare Fuse 100 A 3.26
12/24 Volt Heavy Duty Power Pack. For larger
engined vehicles.
Stock No Starting Current Peak Current Price
331680 700 A (12V) 1500 A (12V) 133.66
400 A (24 V) 900 A (24 V)
Heavy Duty Booster Cable. With large oversize
clamps to help prevent power loss by reducing the
heating effect of power transfer.
Stock No Cable Section Length Capacity Price
333482 25 mm 2 5.0 m 600 A 70.36
GS/TUV Approved Booster Cables. Feature
tough, fully insulated clamps with inset jaw faces that
reduce the risk of short out whilst connecting clamps to
battery terminals.
Stock No Cable Section Length Capacity Price
333484 16 mm 2 3.0 m 450 A 28.76
333486 25 mm 2 3.5 m 600 A 45.56
333488 35 mm 2 4.5 m 700 A 71.96
Battery Bus Bar
Sealey brand. Wall mounted bus bar allows six 12 Volt
batteries to be connected to one battery charger. Bar
includes position for tidy storage of unused clamps and
LED to show when system is energised.
Stock No Description Price
333464 Multi-Charge Battery Bus Bar 111.96
Battery Master
Draper brand. Designed to be left connected to
automotive batteries for extended periods of time. It will
maintain the battery charge and ensure the vehicle's
alarm and other systems do not drain the battery. Fitted
with crocodile clips, fuse and 4 metres of cable.
Stock No Input Voltage Output Voltage Price
331665 230 V AC 12 V DC 19.33
RoadStart Power Packs
Sealey brand. Made in USA. Portable engine starting
system that delivers enough power to start up to 30
vehicles. These products have been developed for their
cyclic efficiency; they are able to accept, store and
release charge time after time. Features include
• Composite case with integral battery clip storage
heads
• LED battery condition and charge indicators
• Test button indicates if device is correctly receiving
power during charge cycle.
• Rechargeable through 230 V AC supply or 12 V DC
supply through vehicle cigarette lighter socket.
• Auxiliary power output can be used to power 12 V DC
items such as lighting.
• Can be used to retain memory codes for car radios
and alarms whilst main battery is disconnected.
• Automatic power cut-off prevents damage to battery
whilst charging from the mains.
RS 850 12 Volt Power Pack
Stock No Cold Cranking Current Peak Current Price
333466 185 A 850 A 169.95
RS1 12 Volt Power Pack
Stock No Cold Cranking Current Peak Current Price
333468 300 A 1000 A 183.96
RS 102 12 Volt Power Pack
Stock No Cold Cranking Current Peak Current Price
333470 600 A 1600 A 215.96
RS 1224 12/24 Volt Power Pack
Stock No Cold Cranking Current Peak Current Price
333472 1200 A (12 V) 3200 A (12 V) 719.96
600 A (24 V) 1700 A (24 V)
Booster Cables With Electronic Protection
Sealey brand. GS/TUV Approved stranded copper cables
with fully insulated clamps. Fitted with surge protector
that fully protects sophisticated vehicle electronics from
the effects of voltage spikes and surges.
Booster Cables With Electronics Protection
12 Volt
Stock No Cable Section Length Capacity Price
333490 16 mm 2 3 m 300 A 43.16
333492 25 mm 2 3.5 m 600 A 63.16
Booster Cables with Electronics Protection
12/24 Volt
Stock No Cable Section Length Capacity Price
333494 25 mm 2 3.5 m 600 A 67.96
Road Side Power Packs
Draper brand. Portable engine starting system complete
with integral worklight, battery charge indicator and
heavy duty booster cables with insulated crocodile clips.
Rechargeable through 230 V AC supply or 12 V DC supply
through vehicle cigarette socket.
12 Volt Power Pack. For small engined vehicles
Stock No Starting Current Peak Current Price
331670 400 A 900 A 106.50
12 Volt Power Pack with Integral
Compressor. Compressor comes complete with
delivery hose and range of popular valve connectors.
Stock No Starting Current Peak Current Price
331675 400 A 900 A 101.43
Compressor Max Output Pressure 250 psi
CONTINUED >
Booster Cables
Sealey brand. Manufactured from quality, PVC sheathed,
stranded copper welding cable for minimum heating and
maximum power transfer. Resistant to grease, oil and
most acids. Strong clamps help reduce heating effect of
power transfer.
Standard Booster Cables
Stock No Cable Section Length Capacity Price
333474 10 mm 2 2.5 m 160 A 15.96
333476 16 mm 2 3.0 m 300 A 25.16
333478 25 mm 2 3.5 m 600 A 43.16
333480 25 mm 2 5.0 m 600 A 61.56
CONTINUED >
Battery Hydrometer
Draper brand. Draws electrolyte from automotive
batteries and checks the charge by measuring the
density of the electrolyte.
Stock No Density Range Price
331240 1.15 - 1.30 g/ml 4.59
Trade Counter open
8.00 am - 5.30 pm Monday to Friday
and 8.30 am - 1.00 pm Saturday

204
BATTERY EQUIPMENT
Voltage Surge Protectors
Draper brand. Improves voltage surge protection for
vehicle electronics during welding, plasma cutting, jump
starts and other repair applications. Connects across the
battery terminals; 12 and 24 volt versions are available.
Stock No Battery Voltage Price
331360 12 V 10.58
331365 24 V 11.57
LED Battery And Alternator Tester
Sealey brand. LED indicators verify condition of battery
and alternator, plus also shows system voltage. Magnetic
back sticks to metal surfaces for hands-free operation.
Suitable for 12 and 24 Volt systems. Fitted with 1 metre of
cable.
Stock No Connection Price
333504 Crocodile Clips 39.95
Professional Battery Load Tester
Draper brand. Suitable for 6 and 12 V batteries. Applies
load across cells and measures output on meter. Gives
accurate indication of battery voltage, faulty cell and
short circuited cell. Also tests charging and starting
circuits on motorcycles, cars, light commercial vehicles
and tractors. Tests up to 100 A.
Stock No Description Price
331695 Battery Load Tester 55.12
Prosaf Voltage Surge Protectors
Sealey brand. Prosaf units are guaranteed to clip voltage
spikes and surges and provide total protection to vehicle
electronics during workshop maintenance, including
processes such as welding and plasma cutting. Connects
across the battery terminals; 12 and 24 volt versions are
available. Fitted with heavy duty, insulated battery clips.
Device shows green light when operating correctly and
red light when faulty.
Stock No Battery Voltage Price
333496 12 V 55.96
333498 24 V 95.96
Digital Battery Tester
Sealey brand. Fast and accurate assessment of battery
condition, even with the battery partially discharged. No
heat, no sparks and no misdiagnosis. Tests battery in
accordance with rated output based on SAE, DIN and
ENC2 criteria and displays results on LCD screen. Handle
battery faults with confidence. Supplied with
comprehensive instruction manual. For 12 V batteries
only.
Stock No Test Range Price
333506 200 - 1200 CCA (SAE) 87.96
CCA Cold Cranking Amps
Rating Systems SAE, DIN, ENC2
Electronic Battery Tester - 3 Function
Sealey brand. Steel case with carry strap. Electronic
analyser with digital voltmeter and four LED read-outs for
battery and alternator condition. Supplied with leads,
crocodile clips, test probe and full operating instructions.
Optional trolley available.
Stock No Description Price
333510 3 Function Battery Tester 79.96
Test Functions: Battery Test
Alternator/Regulator Test
Coil/Electrics Test
Memory Saver
Draper brand. Maintains an uninterrupted power supply to
security coded car electrical devices whilst vehicles
battery is disconnected. The Saver provides power via the
cigarette lighter socket. The Saver can be powered by a 9
V PP3 battery or a fully charged 12 V car battery. Supplied
with 2 metres of cable complete with battery clips.
Stock No Description Price
331690 Security Code Saver 10.45
LED Battery And Alternator Tester
Sealey brand. LED indicators verify condition of battery
and alternator. Suitable for 12 V DC systems. Fitted with
300 mm of cable.
Stock No Connection Price
333500 Crocodile Clips 12.76
333502 Cigarette Lighter 14.45
Digital Battery And Alternator Tester
Sealey brand. Professional diagnosis of battery and
alternator faults. Tests battery condition with as little as 1
Volt of residual charge. No heat, no sparks and no
misdiagnosis. Checks condition of starter, no complicated
connections or interpretations required. Analyse the
vehicles charging system at rest and under load to
determine the condition of the alternator. Connect the
unit and follow the prompts on the LCD screen for
straightforward answers. Incorporates simple voltmeter
for voltage tests and additional system diagnostics.
Rugged construction. Supplied with comprehensive
instruction manual. For 6 and 12 V batteries and 6, 12 and
24 V charging systems.
Stock No Test Range Price
333508 40 - 2000 CCA (SAE) 207.96
CCA Cold Cranking Amps
Rating Systems SAE, DIN, ENC2
Stock No 333496
Workshop Volt/Amp Meter - 9 Function
Sealey brand. Steel case with carry strap. Two large
meter read-outs, one voltmeter and one ammeter.
Supplied with two pairs of leads with crocodile clips and
full operating instructions. Optional trolley available.
Stock No Description Price
333512 9 Function Workshop Meter 79.96
Test Functions: Battery Test
Alternator Voltage
Feed Voltage
Voltage Drop
Earth Contact
Electric System
Alternator Current
Run Down Current
Equalisation

BATTERY EQUIPMENT/TOW ROPES & BRACES 205
Workshop Meter Trolley
Steel trolley for use with Sealey three and nine function
workshop meters/testers.
Stock No Description Price
333514 Workshop Meter Trolley 134.95
Battery Post And Terminal Cleaner
Sealey brand. Removes corrosion build-up on battery
posts and terminals for improved electrical contact.
Stock No Description Price
333524 Battery Terminal Cleaner 3.56
Concertina Tow Rope
Draper brand. Manufactured to BS AU 187. Sixteen
strand, elasticated, polyethylene rope with zinc plated,
safety hooks on each end.
Stock No Length Capacity Price
331422 4.3 m 2500 kg 10.34
Clip-On Ammeters
Sealey brand. Moving coil meter suitable for measuring
DC current without breaking the circuit. Fitted with spring
loaded induction clip. Dial face 55 mm diameter.
Stock No Range Price
333516 0 - 30 A 23.96
333518 0 - 75 A 23.96
Heavy Duty Battery Terminal Cleaner
Sealey brand. Removes corrosion build-up on battery
posts and terminals for improved electrical contact.
Features clamp reamer and terminal scrapers.
Stock No Description Price
333526 Four Way Battery Terminal Cleaner 6.76
Towing Brace
Draper brand. Manufactured to GS/TUV specifications.
Steel sections lock together with spring clips. Hooks
feature sliding locking mechanism to prevent
disengagement during towing. Supplied in storage case
with On Tow sign.
Stock No Length Capacity Price
331710 1.8 m 2000 kg 28.71
Remote Starter Switch
Sealey brand. Makes one man operation possible for a
variety of under the bonnet tasks. Connects to starter
system and allows push button turnover of engine.
Supplied with 1.5 metre of cable and full instructions.
Stock No Description Price
333520 Remote Starter Switch 11.16
Ignition Bypass System
Sealey brand. Fitted in seconds, this bypass system
replaces ignition coil and leads and starts vehicles that
may otherwise have to be towed in. Can be used on any
vehicle with a distributor cap and is suitable for use on
vehicles with electronic engine management. Soft start
circuitry prevents damage to the vehicle by gradually
bringing up the spark rate.
Stock No Battery Voltage Price
333522 12 V 107.45
Battery Terminal Puller
Sealey brand. Mini puller with spring-loaded jaws for the
removal of corroded battery clamps from terminals.
Suitable also for the removal of small gears, pulleys and
bearings.
Stock No Jaw Spread Jaw Reach Price
333528 64 mm 50 mm 5.56
Tow Ropes
Draper brand. Manufactured to BS AU 187. High visibility,
yellow, propylene rope with hoop on one end and zinc
plated safety hook on the other end. Supplied complete
with On Tow sign and warning flag.
Stock No Length Capacity Price
331700 3.7 m 2000 kg 7.01
331705 3.7 m 4000 kg 13.13
Towing Braces
Sealey brand. Manufactured to GS/TUV specifications.
Steel sections lock securely together. These tow poles
can be mounted between vehicles where towing eyes
are mixed i.e. not both horizontal or vertical.
Tow Pole 2 Tonnes. With spring loaded damper
unit.
Stock No Length Capacity Price
333530 1.8 m 2000 kg 31.96
Tow Pole 2.5 Tonnes. Rigid tow pole.
Stock No Length Capacity Price
333532 1.8 m 2500 kg 38.36
Tow Pole 3 Tonnes. Rigid tow pole.
Stock No Length Capacity Price
333534 1.6 m 3000 kg 43.96
Stock No 331710

206
TRIANGLE/PULLERS/TIE DOWNS/TARPAULINS
Vehicle Warning Triangle
Manufactured to European Standard ECE R27 and tested
to E1 specifications. Folding design with stand and rubber
feet. Supplied in plastic carrying case.
Stock No Description Price
331715 Vehicle Warning Triangle 9.20
Hand Pullers
Sealey brand. Manufactured to GS/TUV specifications.
Hand operated device suitable for moving machines,
vehicles, logs and other heavy objects. Fitted with ratchet
safety device. Side frames manufactured in one piece
from zinc chrome plated best quality steel.
Hand Puller 1 Tonne. Single gear and pawl.
Stock No Capacity Breaking Strain Price
333536 1000 kg 2000 kg 29.56
Cable Diameter 5 mm
Cable Length 3 metres
No. of Hooks 2
Hand Puller 1.3 Tonnes. Double gear and pawl.
Stock No Capacity Breaking Strain Price
333538 1300 kg 2000 kg 44.00
Cable Diameter 5 mm
Cable Length 3 metres
No. of Hooks 2
Hand Puller 1.5 Tonnes. Double gear and pawl.
Stock No Capacity Breaking Strain Price
333540 1500 kg 4000 kg 59.16
Cable Diameter 6 mm
Cable Length 3 metres
No. of Hooks 3
Stock No 331720
Wire Rope Winch/Hoists
Draper brand. Adaptable drumless winch/hoist suitable
for pulling or lifting. Supplied with 20 metres of wire rope
with hook. Spare lengths of wire rope with hook are
available.
WRP1 Wire Rope Winch/Hoist
Stock No Pulling Capacity Lifting Capacity Price
331720 2400 kg 1600 kg 276.68
Cable Diameter 11 mm
Cable Length 20 metres
Weight 12 kg
Stock No Description Price
331725 20 Metre Wire Rope with Hook 76.48
WRP2 Wire Rope Winch/Hoist
Stock No Pulling Capacity Lifting Capacity Price
331730 4000 kg 3200 kg 335.79
Cable Diameter 16 mm
Cable Length 20 metres
Weight 23 kg
Stock No Description Price
331735 20 Metre Wire Rope with Hook 100.38
Ratchet Tie Downs
Sealey brand. Manufactured from nylon or polyester
webbing with stitched reinforcement around hooks.
Straps are mechanically tensioned by a drum and ratchet
mechanism. Two loads are indicated in the
specifications; the rated strength is the maximum load
that should be developed using the ratchet mechanism,
the load test capacity is the maximum shock load that
should be placed on the tie down.
TD115 Pair of Ratchet Tie Downs. Two piece set.
Stock No Rated Strength Load Test Capacity Price
273600 500 kg 1000 kg 13.56
Strap Length 4.5 metres
Strap Width 25 mm
Strap Thickness 1.5 mm
TD220 Ratchet Tie Down
Stock No Rated Strength Load Test Capacity Price
273610 1000 kg 2000 kg 14.36
Strap Length 6 metres
Strap Width 50 mm
Strap Thickness 1.5 mm
T250 Ratchet Tie Down
Stock No Rated Strength Load Test Capacity Price
273615 1100 kg 2200 kg 17.45
Strap Length 6 metres
Strap Width 38 mm
Strap Thickness 2 mm
CONTINUED >
Ratchet Tie Downs CONTINUED >
TD614 Ratchet Tie Down
Stock No Rated Strength Load Test Capacity Price
273620 1500 kg 3000 kg 22.36
Strap Length 9 metres
Strap Width 50 mm
Strap Thickness 2 mm
TD914 Ratchet Tie Down
Stock No Rated Strength Load Test Capacity Price
273625 2000 kg 4000 kg 27.16
Strap Length 9 metres
Strap Width 50 mm
Strap Thickness 2.4 mm
TD1214 Ratchet Tie Down
Stock No Rated Strength Load Test Capacity Price
273630 2500 kg 5000 kg 31.96
Strap Length 9 metres
Strap Width 50 mm
Strap Thickness 3.2 mm
TD2214 Ratchet Tie Down
Stock No Rated Strength Load Test Capacity Price
273635 5000 kg 10000 kg 63.96
Strap Length 9 metres
Strap Width 75 mm
Strap Thickness 4 mm
Tarpaulins
Sealey heavy duty tarpaulins. Manufactured from 130g/m 2
material with heavy 30 micron laminate. Tear-proof,
waterproof and treated with a UV filter for extra
durability. Mould and mildew proofed. Constructed with
roped edges with metal grommets in all corners and
every three feet. Top quality tarpaulins available in blue
or green.
Blue Tarpaulins
Stock No Size Price
333542 6 x 8 ft 1.83 x 2.44 m 5.96
333544 8 x 10 ft 2.44 x 3.05 m 9.56
333546 10 x 12 ft 3.05 x 3.66 m 13.96
333548 12 x 16 ft 3.66 x 4.88 m 21.56
333550 16 x 20 ft 4.88 x 6.10 m 31.96
333552 18 x 24 ft 5.49 x 7.32 m 43.96
333554 20 x 40 ft 6.10 x 12.19 m 75.96
Green Tarpaulins
Stock No Size Price
333556 6 x 8 ft 1.83 x 2.44 m 5.96
333558 8 x 10 ft 2.44 x 3.05 m 9.56
333560 10 x 12 ft 3.05 x 3.66 m 13.96
333562 12 x 16 ft 3.66 x 4.88 m 21.56
333564 16 x 20 ft 4.88 x 6.10 m 31.96
333566 18 x 24 ft 5.49 x 7.32 m 43.96
333568 20 x 40 ft 6.10 x 12.19 m 75.96
Phone Lines open
7.30 am - 5.30 pm Monday to Friday
and 8.30 am - 1.00 pm Saturday

TARPAULIN CLIPS/INSPECTION LAMPS 207
Tarpaulin Clip Set
Sealey 2 pce clip set. Rugged composite clip with heavy
duty spring and bungee. Grips tarps and sheeting tight
without the need to locate rope eyes. The tighter the clip
is pulled, the tighter it grips. Simple to release. Suitable
for use on trucks and trailers.
Stock No Description Price
333570 Tarpaulin Clip Set 2 Pce 5.96
Heavy Duty Inspection Lamps
Robust inspection lamp manufactured by Brennenstuhl,
Germany. With high quality rubber handle, steel wire
basket and glass bulb protector. Suitable for bulbs up to
100 watt with bayonet connector. Supplied with 5 metres
of cable and fitted plug.
Stock No Voltage Power Price
282010 230 V 100 W 10.72
282011 110 V 100 W 13.95
Fluorescent Inspection Lamps
For universal use, bringing light where you need it. High
output lighting with low power consumption. Robust and
impact resistant, with large rotatable hook for hanging.
Supplied with 5 metres of cable.
230 Volt Fluorescent Lamp. With fitted 5A fused
BS plug.
Stock No Voltage Power Price
282020 230 V 8 W 6.84
12 Volt Fluorescent Lamp. Two-way power supply;
can be connected to cigarette lighter socket or 12 Volt
battery. Supplied with floor stand.
Stock No Voltage Power Price
280110 12 V 8 W 12.76
Tarpaulin Clip Set
Sealey 4 pce clip set. Composite clip with heavy duty
spring. Simple to use with tension adjusting control to
enable a firm grip of tarps and sheeting without the need
to locate rope eyes. Suitable for use on trucks and
trailers.
Stock No Description Price
333572 Tarpaulin Clip Set 4 Pce 6.36
Safety Inspection Lamp
Inexpensive inspection lamp manufactured by
Brennenstuhl, Germany. With impact resistant flexible
basket and glass bulb protector. Suitable for bulbs up to
60 watt with bayonet connector. Supplied with 5 metres
of cable and 5 A fused BS plug.
Stock No Voltage Power Price
282000 230 V 60 W 6.48
Stock No 285060
Gripper Inspection Lamps
Heavy duty construction features unique adjustable
gripping mechanism incorporated into the handle. With
steel wire basket and glass bulb protector. Suitable for
bulbs up to 60 watt with bayonet connector. Supplied
with 5 metres of cable and fitted plug.
Stock No Voltage Power Price
282012 230 V 60 W 12.24
282013 110 V 60 W 14.32
Light Bulbs
Standard light bulbs, suitable for inspection lamps.
Available with bayonet connector (BC) or Edison screw
(ES) fittings.
110 Volt GLS Bulbs
Stock No Power Fitting Price
284010 60 W BC 0.29
284015 60 W ES 0.29
284020 100 W BC 0.29
284025 100 W ES 0.29
230 Volt GLS Bulbs
Stock No Power Fitting Price
284030 60 W BC 0.29
284035 60 W ES 0.29
284040 100 W BC 0.29
284045 100 W ES 0.29
12 Volt Lead Lamp
Draper brand. Expert quality. Manufactured to BS EN
60598. Heavy duty lamp with on/off switch, swivelling
steel clamp, steel reflector, nitrile seal, lens bumper-ring,
domed polycarbonate lens and ABS handle with easy
access for rewiring. Supplied with 7.25 metres of cable
with stripped ends so that user can select clips or
transformer for power supply.
Heavy Duty Lead Lamp
Stock No Voltage Power Price
285050 12 V 24 W 26.84
230/12 Volt Mains Adaptor. Single outlet
transformer with integral 3 pin mains plug.
Stock No Description Price
285052 Transformer For Stock No. 285050 25.93
230/12 Volt Twin Outlet Transformer. With two
25 watt outlets.
Stock No Description Price
285054 Transformer For Stock No. 285050 55.33
Replacement Bulb
Stock No Description Price
285056 24 W Bulb for Stock No. 285050 1.75
12 Volt Lead Lamp With Mains Adaptor
Draper brand. Expert quality. Manufactured to BS EN
60598. Heavy duty lamp as stock no. 285050 except that
the 7.25 metre cable is fitted with 12 Volt plug. Supplied
complete with plug-in mains adaptor.
Stock No Voltage Power Price
285060 12 V 24 W 49.84

208
INSPECTION LAMPS/WARNING LIGHTS/DOOR TOOLS
Retractable Inspection Lamps
Sealey inspection lamps with retractable cables; helps
keep workshops clear of trailing cables. The system can
be wall or ceiling mounted. Strong ratchet mechanism to
ensure long service life. The cable is retracted by a pull
and release action. The lamp features a steel wire
protective cage with a hanging hook and an on/off
switch. Suitable for bulbs up to 60 watt with screw fitting.
230 Volt Retractable Inspection Lamp
Stock No Input Voltage Output Voltage Price
286010 230 V 230 V 84.95
Cable Length 8 metres
Bulb Specification 230 V 60 W (ES)
230 Volt Heavy Duty Retractable Inspection
Lamp
Stock No Input Voltage Output Voltage Price
286020 230 V 230 V 99.45
Cable Length 8 metres
Bulb Specification 230 V 60 W (ES)
12 Volt Retractable Inspection Lamp
Stock No Input Voltage Output Voltage Price
286030 230 V 12 V 114.95
Cable Length 12 metres
Bulb Specification 12v 60w (ES)
12 Volt Retractable Inspection Lamp
Stock No Input Voltage Output Voltage Price
286040 230 V 12 V 132.95
Cable Length 15 metres
Bulb Specification 12 V 60 W (ES)
12 Volt Heavy Duty Retractable Inspection
Lamp
Stock No Input Voltage Output Voltage Price
286050 230 V 12 V 142.95
Cable Length 12 metres
Bulb Specification 12 V 60 W (ES)
12 Volt Heavy Duty Retractable Inspection
Lamp
Stock No Input Voltage Output Voltage Price
286060 230 V 12 V 159.95
Cable Length 15 metres
Bulb Specification 12 V 60 W (ES)
Low Voltage Light Bulb. Rough service bulb with
screw fitting suitable for inspection lamps.
Stock No Voltage Power Price
286070 12 V 60 W 1.16
Stock No 333574
Rotating Amber Beacon
Draper brand. For fitting to slow moving vehicles as a
warning on public roads. Permanent mounting by
machine screws fitted to three legs. Legs have rubber
vibration absorbers.
Rotating Amber Beacon
Stock No Voltage Power Price
285065 12 V 20 W 21.72
Replacement Bulb. Also fits magnetic rotating
amber beacon.
Stock No Voltage Power Price
285070 12 V 20 W 1.21
Magnetic Rotating Amber Beacon
Draper brand. For temporary mounting on vehicles as a
warning device. Strong magnetic base for easy fit and
removal. Lead with cigarette lighter plug.
Stock No Voltage Power Price
285075 12 V 20 W 30.94
Magnetic Strobe Amber Light
Draper brand. For temporary mounting on vehicles as a
warning device. Strong magnetic base for easy fit and
removal. Lead with cigarette lighter plug. Good visibility,
even in the poorest light conditions.
Stock No Voltage Power Price
285080 12 - 24 V 20 W 55.42
Window Winder Clip Removal Tool
Draper brand. For the removal and installation of the
spring clips used on window winder handles fitted on GM
vehicles and other vehicles with similar configurations.
Stock No Description Price
331745 Window Winder Clip Tool 3.71
Door Pin Removal Kit
Draper brand. For the removal of hollow hinge pins. Kit
comprises square handle and 3.5, 4.5 and 5.5 mm pins.
Stock No Description Price
331030 Door Pin Removal Kit 11.75
331031 Set (3) Pins 7.98
Door Panel Removal Tool
Draper brand. For the removal of door panels without
breaking the securing clips from the panel.
Stock No Description Price
331040 Door Panel Removal Tool 4.00
Door Panel Clip Remover
Sealey brand. For the removal of interior plastic trim
retaining studs without damaging trim or studs. Heavy
duty pattern with vinyl grip handle. Head swivels through
90° for easy access into confined spaces.
Stock No Description Price
333574 Door Panel Clip Remover 23.96
Emergency Car Opening Kit
Sealey brand. This kit will open a comprehensive range
of European, American and Japanese cars. Supplied in
vinyl pouch. For sale to bona-fide vehicle dealers and
repair centres only. Contents include window wedges,
strip type catches, wire catches, plastic knob catch and
fuel cap keys.
Stock No Description Price
333576 11 pce Car Opening Kit 25.56

WINDSCREEN TOOLS 209
Windscreen Removal Kit
Cutting Wire
Twin Suction Lifter
Sealey brand. Complete set of tools for the removal of
bonded and rubbered screens. Contents include cutting
wire, wire handles, bonded screen removal tool, starter
tool, trim clip remover and trim pad remover.
Stock No Description Price
333578 7 pce Screen Removal Kit 63.96
Draper brand. Stainless steel wire for cutting the bonding
resin used to fit modern windscreens. Available as
standard wire or braided wire.
Stock No Type Price
331750 Standard Wire 10.20
331755 Braided Wire 12.54
Draper brand. Made from tough plastic with rubber
suction pads. Push lock levers for easy operation.
Suitable for lifting glass and other non-porous sheet
materials.
Stock No Lifting Capacity Cup Diameter Price
331770 50 kg 118 mm 9.69
Windscreen Installation Kit
Sealey brand. Complete set of tools for the installation of
rubbered screens, including commercial vehicle screens.
Stock No Description Price
333580 10 pce Screen Installation Kit 31.96
Starter Tool
Draper brand. For feeding cutting wire through the
bonding on windscreens.
Stock No Length Price
331760 265 mm 11.49
Twin Suction Lifter
Draper brand. Made from high density aluminium alloy
with rubber suction pads. Push lock levers for easy
operation. Suitable for lifting glass and other non-porous
sheet materials.
Stock No Lifting Capacity Cup Diameter Price
331775 60 kg 123 mm 33.78
Bonded Windscreen Removal Tools
Draper brand. Two handed tool for cutting through the
bonding resin used to fit modern windscreens. Supplied
with 25 mm, specially shaped, hardened, carbon steel
blade.
Screen Removal Tool
Stock No Body Length Price
331402 163 mm 10.83
Screen Removal Tool. With quick release blade.
Stock No Body Length Price
331403 150 mm 19.73
Replacement Blades
Stock No Length Price
331460 19 mm 2.75
331461 25 mm 2.75
331462 31 mm 2.75
Stock No 331775
Handles For Cutting Wire
Draper brand. For use with windscreen cutting wire.
Manufactured from reinforced resin with soft grip
handles.
Stock No Description Price
331765 Pair of Cutting Wire Handles 24.87
Suction Lifter/Dent Puller
Draper brand. Made from tough plastic with thick rubber
suction pad. Suitable for lifting glass and for pulling out
minor dents in body panels.
Stock No Cup Diameter Price
331438 118 mm 3.71
Triple Suction Lifter
Draper brand. Made from high density aluminium alloy
with rubber suction pads. Push lock levers for easy
operation. Suitable for lifting glass and other non-porous
sheet materials.
Stock No Lifting Capacity Cup Diameter Price
331780 80 kg 123 mm 50.78
Window Holder Kit
Draper brand. Two pairs of sucker cups for holding
vehicle side windows during maintenance. Sucker cups
are attached to each side of the window glass and the
connecting cables looped over the door frame.
Stock No Description Price
331785 2 pce Window Holder Kit 6.90

210
BRAKE ADJUSTMENT TOOLS
Window Scraper
Draper brand. Stainless steel scraper with resin handle.
For the removal of stubborn adhesives, including bonding
resin from windscreens. Supplied complete with one
double sided blade.
Window Scraper
Stock No Width Price
331406 38 mm 11.21
Pkt of Replacement Blades
Stock No Quantity Price
331408 12 3.50
Brake Pad Keys
Draper brand. Long reach hex key manufactured from
chrome vanadium steel with a comfortable handle
sleeve.
Stock No Size Handle Length Price
331412 7 mm 140 mm 2.78
331414 8 mm 140 mm 2.78
Brake Caliper Pin Punch
Draper brand. Pilot tip aids location in brake pad
retaining pins used in GM (Vauxhall/Opel) vehicles.
Stock No Size Price
331805 6 mm 1.86
Wiper Arm Removal Tool
Draper brand. For the safe and efficient removal of
windscreen wiper arms. Avoids damage to vehicle
bodywork or wiper assembly.
Stock No Description Price
331404 Wiper Arm Removal Tool 10.95
Brake Adjustment Socket
Draper brand. Standard length, 5 pt, impact socket for
brakes on Citroen and Peugeot vehicles.
Stock No Description Square Drive Price
337010 Pentagon Socket 1
⁄2" 3.42
Brake Caliper Wind Back Cube
Draper brand. Suitable for most rear brake calipers.
Allows the caliper piston to be wound back for the fitting
of new brake pads. Five key patterns.
Stock No Square Drive Price
331432 3
⁄8" 6.67
Girling Brake Bit Socket
Draper brand. Five sided bit socket for use on Girling
brake systems.
Stock No Description Square Drive Price
337020 Pentagon Bit Socket 1
⁄2" 4.43
Caliper Piston Retraction Tool
Draper brand. Ensures parallel piston retraction, thus
avoiding damage to piston seals. For use on twin fixed
and single piston sliding calipers.
Stock No Square Drive Price
331442 1
⁄2" 18.55
Bonnet Protector
Draper brand. Protects bonnets when removing and
installing windscreens. Quilted padding with quick
release elasticated straps. Universal sizing, suitable for
most vehicles.
Stock No Size Price
331795 1460 x 1110 mm 4'9" x 3'8" 81.23
Flare Nut Wrench
Draper brand. Designed for compression nuts fitted on
brake pipes (and other fluid systems). Manufactured from
chrome vanadium steel.
Stock No Size Price
331800 10 x 11 mm 3.22
ABS Brake Servicing Tool
Draper brand. For winding back brake pistons on ABS
brakes. Suitable for most Ford and Rover vehicles.
Stock No Description Price
331444 ABS Brake Servicing Tool 10.70
Stock No 331406

BRAKE ADJUSTMENT & FLARING TOOLS 211
Flaring Tools CONTINUED >
Replacement Double Lap Adaptors. Standard
Sizes
Stock No Sizes Price
175620 3
⁄16" 2.40
175621 1
⁄4" 2.40
Brake Piston Wind Back Tool
Sealey brand. For winding back brake pistons fitted to
Collette type brake calipers. Complete with double sided
adaptor, allowing application to a wide range of vehicles.
Two additional adaptors are available. For applications,
please call our sales staff or visit the Sealey website,
www.sealey.co.uk.
Stock No Description Price
333582 VS 024 Wind Back Tool 21.56
333584 VS 0241 Wind Back Adaptor 21.95
333586 VS 0242 Wind Back Adaptor 28.95
Brake Pad Puller
Sealey brand. Aids quick removal of disc brake pads,
especially when brakes have bound and extraction by
hand is difficult. Insert pins in pad and use mini slide
hammer to ease pad from caliper.
Stock No Description Price
333590 Brake Pad Puller 11.16
Flaring Tool
Laser brand. Produces male female and double flares in
copper brass and aluminium tubing. Compact design
allows this tool to be used with the pipe in position on the
car.
Stock No Sizes Price
175580 3
⁄16, 1 ⁄4, 5 ⁄16, 3 ⁄8, 1 ⁄2, 5 ⁄8" 34.42
Brake Piston Wind Back Tool Kit
Draper brand. Thrust bolt assembly with precision made
adaptor plates. Winds back brake pistons, allowing new
brake pads to be installed, without damaging pistons or
seals.
Stock No Description Price
331440 8 pce Wind Back Tool Kit 46.37
Brake Disc Caliper
Sealey brand. Stainless steel calipers suitable for
accurate measurement of brake disc thickness. Floating
jaw assembly enables easy removal of caliper from disc
while retaining reading. Supplied in plastic storage case.
Stock No Range Graduations Price
333592 0 - 50 mm 0.1 mm 31.96
Cam Action Pipe Flaring Tool
Sealey brand. Enables simple and accurate production of
double lap flares. Tool body fits into bench vice. Supplied
in steel box with full instructions.
Stock No Die Sizes Price
333596 3
⁄16" SAE 4.75 mm DIN 159.96
Other die sizes available; a full listing is supplied with
the tool.
Motorbike Brake Piston Removing Tool
Laser brand. This tool dramatically reduces the time
taken to dismantle motorcycle brakes. The tool will not
mark or damage the working part of the piston and will
remove frozen pistons with ease. Supplied with twelve
universal adaptors.
Stock No Description Price
335100 14 pce Brake Piston Removing Tool 96.70
Adaptor Sizes 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30 mm
Brake Disc Wear Gauge
Sealey brand. Measures thickness of brake lining on disc
pads without the need to remove pad or caliper.
Calibrated in inches.
Stock No Range Price
333594 1
⁄16 - 5 ⁄8" 6.95
Microbore Tube Bender
Egamaster brand. Will give smooth, kink-free bends in
copper, brass and light steel tubes. Suitable for brake,
clutch and other microbore pipes.
Stock No Sizes Price
175271 1
⁄8, 3 ⁄16, 1 ⁄4" 14.44
Brake Pad Spreader Tool
Sealey brand. Economy brake pad spreader suitable for
most ATE, Bendix, Delco and Girling calipers. Suitable for
standard and 4-piston disc brakes.
Stock No Length Price
333588 170 mm 11.96
Flaring Tools
Sealey brand. Suitable for producing single 45º flares or
double lap flares in copper, brass or aluminium pipe.
Supplied in plastic storage case.
Standard Flaring Tool
Stock No Sizes Price
175600 3
⁄16, 1 ⁄4, 5 ⁄16, 3 ⁄8, 7 ⁄16, 1 ⁄2, 5 /8" 15.96
Flaring Tool with Pipe Cutter
Stock No Sizes Price
175610 3
⁄16, 1 ⁄4, 5 ⁄16, 3 ⁄8, 7 ⁄16, 1 ⁄2, 5 /8" 23.15
CONTINUED >
Stock No 333596

212
TUBE, HOSE & BRAKE SPRING TOOLS
Mini Tube Bender
Egamaster brand. Will give smooth, kink-free bends in
copper, brass and light steel tubes. Suitable for
automotive, air conditioning, refrigeration and plumbing
applications.
Stock No Sizes Price
175272 1
⁄4, 5 ⁄16, 3 ⁄8" 17.83
Will also bend 6mm, 8mm and 10mm tube.
Brake Hose Clamp
Draper brand. Single-handed snap action tool for
clamping off hydraulic hoses when working on braking
systems. Manufactured from high tensile steel, fully heat
treated with plastic coated handles.
Stock No Length Price
331434 205 mm 4.16
Brake Spring Pliers
Sealey brand. For the safe and easy installation and
removal of brake shoe springs. Suitable for most car and
small van drum brakes.
Stock No Description Price
333612 Brake Spring Pliers 7.16
Sykes Pickavant Pipe Bender
This tool has a unique rolling action, essential when
bending plastic or epoxy-coated brake and clutch pipe.
Bends up to 180º. Vice lug on handle.
Stock No Sizes Price
175420 3
⁄16, 1 ⁄4" 4.75, 6mm 36.00
Hose Pinch Pliers
Sealey brand. Made from glass reinforced nylon;
lightweight non-conductive and highly visible. Smooth
rounded jaw edges prevent damage to internal hose
reinforcement. Quick and simple one-handed use.
Stock No Size Application Price
333600 Small Brake/Fuel Hoses 6.60
333602 Medium Heater Hoses 7.40
333604 Large Radiator Hoses 9.96
Sykes Pickavant Brake Spring Pliers
For the safe and easy removal of brake shoe springs. Can
be used in either RH or LH situations. Floating head
minimises risk of damage to components.
Brake Spring Pliers. Standard model
Stock No Applications Price
339005 Cars and Smaller Vans 33.20
Brake Spring Pliers. Large model
Stock No Applications Price
339010 Larger Vans and HGVs 39.60
Sykes Pickavant Pipe Bender
For steel, copper or brass tubing on automotive, air
conditioning, refrigeration or plumbing applications.
Suitable for diesel fuel pipes. Bends up to 180º. Vice lug
on handle.
Stock No Sizes Price
175410 3
⁄16, 1 ⁄4, 5 ⁄16, 3 ⁄8" 4.75, 6, 8, 10mm 60.00
Hose Pinch Tools
Sealey brand. Suitable for brake and fuel lines. All steel
construction with chromed finish. Simple yet effective
pinch action with smooth rounded clamps to prevent
damage to internal hose reinforcement.
Stock No Description Price
333606 Spring Type Hose Pinch Tool 7.96
333608 Bar Type Hose Pinch Tool 14.36
Brake Spring Tool
Sykes Pickavant tool, for removing and replacing brake
shoe pull-off springs. Cranked for easy access, with a
grooved tip for stretching the spring.
Stock No Description Price
339015 Brake Spring Tool 6.36
Brake & Accelerator Pedal Jack
Sealey brand. Position shaft point on desired foot pedal,
hook plate under steering wheel or seat and squeeze
trigger to depress pedal.
Stock No Working Travel Price
333598 635 mm 28.76
Hose Clamps
Suitable for brake and fuel hoses, especially where
access is restricted.
Stock No Manufacturer Description Price
333610 Sealey Pair of Hose Clamps 8.20
339000 Sykes Pickavant Pair of Hose Clamps 19.20
Brake Spring Washer Tool
Sykes Pickavant double ended tool for installation and
removal of large and small anti-rattle spring washers
found on brake drum assemblies.
Stock No Description Price
339020 Brake Spring Washer Tool 5.33
Looking for an item not listed? Call our Sales Team on 01224 620944

BRAKE FLUID EQUIPMENT 213
Brake Cylinder Circlip Retainer
Sykes Pickavant tool to expand and hold the retaining
circlip on brake cylinders. Also releases the locking
circlip on GM drive shafts.
Stock No Description Price
339025 Brake Cylinder Circlip Retainer 7.48
Brake Fluid Tester
Draper brand. Comparative electrolytic type tester,
checks moisture content of brake fluid by passing current
through the fluid and measuring the resistance. Easily
calibrated using new brake fluid. Adjustable test probe.
Easy to use, just insert probe and press button for
immediate read-out. Uses 9 V PP3 battery - not included.
Stock No Description Price
339875 Electrolytic Brake Fluid Tester 49.59
Pneumatic Brake Bleeding Kit
Draper brand. Universal kit, operates on cars, vans,
trucks and motor bikes. One person operation, using
standard workshop air supply, that allows fluid to be
drawn from the bleed nipple enabling either bleeding or
full replacement of fluid in system. Does not require
specialised brake reservoir caps. Supplied with reservoir
top-up kit. Magnetic bases on refilling bottles.
Stock No Air Pressure Air Consumption Price
331810 70 - 120 psi 6 - 7 cfm 39.93
Pneumatic Oil Extraction / Brake Bleeding Kit
Draper brand. Extracts engine oil from cars, vans, trucks,
motor bikes, marine engines and generators without
removing the drain plug. Also allows fluid to be drawn
from the brake bleed nipple enabling either bleeding or
full replacement of fluid in system. One person operation,
using standard workshop air supply. Supplied complete
with 1.4 metres of anti-kink hose, 4 siphon hoses and
brake bleeding hose with connector.
Stock No Air Pressure Air Consumption Price
331815 70 - 110 psi 6 - 7 cfm 102.14
Reservoir Capacity 10 Litres
Oil Extraction Rate 2.5 Litres/Min
Pressure Brake Bleeder
Sykes Pickavant Professional Model. One person
operation, using standard workshop air supply. Air
pressured fluid to fluid change, or air purging/evacuation
system. Unique reservoir design separates fluid from air,
preventing contamination. Complete with following
accessories.
• Master cylinder cap adaptor set
• Universal cylinder cap adaptor
• Fluid drain bottle and bleed pipe
• Fluid top-up siphon tube
• In-line water separator and filter
Stock No Input Pressure Output Pressure Price
339055 70 - 115 psi 30 psi 396.00
Sykes Pickavant Brake Fluid Tester
Moisture content lowers the boiling point of brake fluid.
This unit operates by heating the fluid and measuring its
boiling point. Heating element is operated from vehicles
12 V supply. Works on all brake fluids with boiling point
up to 320ºC, including DOT3, DOT4 and DOT5.1
specification fluids. Displays boiling point of fluid. Also
simple pass/fail indicator. Supplied in plastic carry case.
Stock No Description Price
339035 Boil Test Brake Fluid Tester 240.47
Brake Bleeding Kit
Draper brand. Convenient one man operation. One way
valve, incorporated into the 600 mm long silicon tube,
prevents air returning to the brake system during the
bleeding process.
Stock No Description Price
331418 Brake Bleeding Kit 7.23
Pressure Brake Bleeder
Sykes Pickavant Economy Model. One person operation,
using standard workshop air supply. Air pressured fluid to
fluid change. Unique reservoir design separates fluid
from air, preventing contamination. Complete with master
cylinder cap adaptor set.
Pressure Brake Bleeder
Stock No Input Pressure Output Pressure Price
339040 70 - 115 psi 30 psi 236.00
Optional Extras
Stock No Description Price
339045 Universal Cylinder Cap Adaptor 47.60
339050 Fluid Drain Bottle & Bleed Pipe 14.95
Professional Brake Bleeder
Sykes Pickavant. One person operation, takes about 15
minutes to bleed a system using the 12 V supply from the
vehicle battery to power a Peristaltic Pump Unit.
Pressurises system to a maximum of 1.4 bar/20 psi,
protecting ABS systems. Compatible with DOT3, DOT4,
DOT5.1 and DOT5 synthetic fluids. Manufactured from
non-corrosive stainless steel. A trolley is an optional
extra for ease of movement, and a replacement pump
unit is available. Complete with following accessories.
• Master cylinder cap adaptor set
• Universal cylinder cap adaptor
• Fluid drain bottle and bleed pipe
• Fluid top-up siphon tube
Stock No Description Price
339060 Brake Bleeder 716.00
339065 Brake Bleeder c/w Trolley 772.00
339070 Replacement Pump 15.95
Stock No 339060

214
INSTALLATION TOOLS FOR CLUTCH, BEARINGS,
SEALS & FANS
GM Clutch Removal Kit
Draper brand. For use on Vauxhall and Opel vehicles
fitted with transverse engines. Contains short stroke slide
hammer, first motion shaft puller adaptor and three clutch
retaining clips. The three clips are available separately.
Stock No Description Price
331820 Clutch Removal Kit 14.77
331825 3 pce Clip Set 2.45
Bearing Driver Set
Sealey brand. Set of nine bearing and seal drivers. Made
from aluminium, they are suitable for the installation of
bearing races without damage to the bearing or housing.
Fits most popular bearing sizes. Supplied in carry case.
Stock No Description Price
333614 Bearing Installer Set 59.96
Driver Sizes 40, 45, 50, 60, 63, 65, 72, 76, 80 mm
Bush & Bearing Installer Kit
Sykes Pickavant. Easy to use kit for the installation of
bearings, bushes and seals. Contains a range of nylon
adaptors which allow full face support, preventing
damage and premature failure. Supplied with dead blow
hammer and bearing cross reference chart. Supplied in
carry case.
Stock No Description Price
339075 Bush & Bearing Installer Kit 280.00
Adaptor Range:
Internal Diameter 10 - 50 mm
External Diameter 26 - 110 mm
Universal Clutch Aligning Kit
Draper brand. For fast accurate alignment of flywheel
pilot hole and clutch drive plate during assembly.
Precision manufactured steel bushes with chemically
blacked finish. Suitable for use on most cars and vans.
Supplied in plastic storage box.
Stock No Description Price
331830 17 pce Clutch Aligning Kit 15.40
Universal Clutch Aligning Tool
Draper brand. Quickly aligns clutch plate and pressure
plate, allowing assembly on the bench. Fits most vehicles
up to 5 tons, except Minis or vehicles with double clutch
plates. Supplied with three collets. Nylon components
with brass shaft.
Stock No Description Price
331835 Clutch Aligning Tool 6.40
Seal Driver Set
Sealey brand. Set of sixteen seal drivers. Made from
plastic composite, they are suitable for installation of
seals without causing damage. Includes three hooded
drivers for seals with dust shields. Supplied in carry case.
Stock No Description Price
333616 Seal Installer Set 23.96
Flat Driver Sizes 32, 38, 41.5, 43, 49, 52, 54, 61, 65, 69, 76,
82, 85 mm
Hooded Driver Sizes 62, 70, 89 mm
Viscous Fan Holding Tool
Manufactured from carbon steel with PVC dipped handle.
Prevents the fan hub from rotating when removing the
retaining nut.
Stock No Length Price
331845 370 mm 10.66
Thermo-Viscous Fan Nut Wrench
Manufactured from chrome plated pressed steel with
PVC dipped handle. For the removal of thermo viscous
fan hubs.
Stock No Size Length Price
331850 32 mm 270 mm 5.28
331855 36 mm 270 mm 5.28
Flywheel Puller
Draper brand. For use on Rover vehicles with transverse
1100/1300 cc engines with either diaphragm or Verto
clutches. Drop forged carbon steel plate with 3 imperial
and 3 metric pulling rods.
Stock No Description Price
331840 Flywheel Puller 15.50
Stock No 333616

COOLING SYSTEM TESTERS/HOSE CLIPS 215
Cam Belt Tensioning Adjusters
Manufactured from zinc plated, EN8 carbon steel plate.
Adjusts the tension on the timing belt by rotating the
waterpump. Suitable for Vauxhall, Opel and some
Daewoo vehicles.
Stock No Size Square Drive Price
331860 41 mm 1
⁄2" 8.87
331865 46 mm 1
⁄2" 8.87
Cooling System Ultraviolet Leak Detector Kit
Sealey brand. Best used in conjunction with cooling
system pressure tester, this UV kit helps find small leaks
quickly. A dye is mixed with the water in the cooling
system. Water leaks containing dye are easily detected
because the dye fluoresces in ultraviolet light. Kit
contains
• 12V ultraviolet lamp
• UV enhancing safety spectacles
• 10 x single doses of fluorescent dye
• Comprehensive instructions
• Supplied in carry case
Stock No Description Price
333622 UV Leak Detector Kit 191.96
333624 Fluorescent Dye-12 Single Doses 87.96
Anti Freeze Tester
Measures the density of the water/anti-freeze mixture in
the cooling system. Read-out indicates minimum
temperature at which the anti-freeze mixture in the
radiator is effective.
Stock No Range Price
331230 -5 to -40ºC 4.34
Radiator Pressure Test Kit
Sealey brand. Traditional style cooling system pressure
test kit with a selection of thirteen adaptors to fit
European and Japanese vehicles. Locates system leaks
from head gasket, header tank, radiator and feeder
cores, water pump, hoses etc. Kit includes
• Adaptors fitted with quick release couplings
• Two caps for Japanese vehicles
• Hand pressure pump with easy to read gauge
Stock No Description Price
333618 Radiator Pressure Test Kit 239.96
Suitable for most European and Japanese vehicles. For
definite information on applications, call the Sealey
technical hot line on 01284-757505
Cooling System Flushing Tool
Fits to standard 1 ⁄2" garden hose connector and uses
compressed air to boost water through the system.
Cleans cooling systems without the use of caustic
solutions.
Stock No Fits Hose Diameters Price
333626 13, 16, 19 mm 31.95
Hose Clip Assortment
Popular size hose clips. Plated finish for corrosion
protection. Supplied in plastic storage case.
Stock No Description Price
331885 20 pce Hose Clip Kit 4.04
Hose Clip Sets
Allows hose clips to be made to the required length. Sets
contain 3 metres of banding and eight tensioning clamps.
Banding available in two widths.
Stock No Banding Width Price
331890 8 mm 4.85
331895 12 mm 6.84
Radiator System And Pressure Cap Test Kit
Sealey capless cooling system tester. Uses inflatable
neoprene bladder to seal the pressure head to the
radiator or header tank. Bladder system can be used on
screw and bayonet fittings and seals 90% of cars and
light commercial vehicles. Also suitable for motorcycles,
off-road and marine applications. Supplied with doubleended
adaptors that enable the kit to test cooling system
pressure caps. Kit includes
• Head unit with neoprene bladder
• Hand pressure pump with easy to read gauge
• Pressure cap test adaptors
• Supplied in carry case
Stock No Description Price
333620 Radiator & Cap Test Kit 199.96
Cooling System Replenisher
Sealey brand. Simple operation with workshop air supply,
does not require fiddly interchange of vacuum and fluid
hoses. Eliminates the introduction of bubbles and air-locks
into the cooling system and dramatically reduces filling
time. No more time-consuming system bleeding, no more
fluid waste and messy spills. Automatically conducts
system leak test. Supplied with a range of adaptors, it will
fit most radiators and header tanks. Supplied with 1.5
metres of fluid hose. Supplied in carry case.
Stock No Max. Air Pressure Price
333628 90 psi 124.95
Hose Clip Driver
For use on hose clips. Spring steel flexible shaft with 6x7
mm double ended hexagon adaptor to fit standard screw
sizes on hose clips.
Stock No Size Blade Length Price
331900 6 x 7 mm 150 mm 5.39
Stock No 331900

216
HOSE TOOLS/AIR CONDITIONING
Hose Clamp Pliers
Suitable for the installation and removal of tag-type hose
clips found on automotive applications. Jaws swivel
through 360º to allow use in confined spaces. Fitted with
spring return handle.
Stock No Length Price
332090 245 mm 8.76
Hose & Tube Removal Pliers
Particularly suitable for fuel and vacuum hoses, these
pliers ensure fast and safe removal of hoses and tubes
from hose nipples. No need to cut and stretch hoses.
Suitable for hose diameters between 5 ⁄ 32 and 1 ⁄2".
Stock No Length Price
333640 200 mm 10.95
Syphon Pump
Plastic syphon pump, suitable for transferring inert liquids.
Pump has in-line squeeze bulb and 1.8 metres of hose
giving a good distance capacity.
Stock No Description Price
331915 Plastic Syphon Pump 2.46
Ear-Type Hose Clamp Pliers
Suitable for securing ear-type hose clips found on
automobile hoses. Also used for securing CV joint boot
clamps.
Ear-Type Hose Clip Pliers
Stock No Length Price
332100 240 mm 9.56
Heavy Duty Ear-Type Clip Pliers. With hardened
steel jaws
Stock No Length Price
333634 240 mm 15.96
Rubber Pipe Cutter
Ideal for cutting flexible hoses and soft rubber tubing.
Hardened and tempered carbon steel blade.
Stock No Capacity Price
331905 0 - 38 mm 9.62
Air Conditioning Ultraviolet Leak Detector Kit
Sealey brand. Find leaks in vehicle R134A air con systems
fast. Supplied with dye injector system for use in
conjunction with any air con recharge/recycle station.
Any leaks containing dye are easily located because dye
fluoresces in ultraviolet light. Kit contains
• 12 V ultraviolet lamp
• UV enhancing safety spectacles
• Dye injector
• Hose and hose adaptors
• 10 x single doses of fluorescent dye
• Comprehensive instructions
• Supplied in carry case
Stock No Description Price
333644 UV Leak Detector Kit 287.96
333646 Fluorescent Dye - 12 Single Doses 31.96
333648 Fluorescent Dye - 33 Dose Bottle 47.96
Identification Clip Set
Set of paired, colour-coded, composite clips. Suitable for
marking wiring and small hoses prior to disassembly.
Stock No Description Price
333636 18 pce Identification Clip Set 15.00
Plug & Cap Identification Tag Set
Colour-coded composite tags for marking hoses for reassembly.
Seven colours supplied in seven different sizes.
Stock No Description Price
333638 49 pce Hose Identification Tag Set 21.95
Sizes are 1 ⁄8, 3 ⁄16, 1 ⁄4, 5 ⁄16, 3 ⁄8, 7 ⁄16, 1 ⁄2"
Hose Cutter
Ratchet cutter for large diameter rubber and vinyl
reinforced hoses (except metal reinforced). Suitable for
radiator hoses. Heat treated, stainless steel blade.
Stock No Capacity Price
333642 6 - 42 mm 16.50
Syphon Pump
Plastic syphon pump, suitable for transferring inert liquids.
Stock No Description Price
331910 Plastic Syphon Pump 2.13
Air Con Spring Lock Coupling Tool Set
Set of four spring type coupling connectors for air
conditioning lines. Locking action prevents spray when
disconnecting lines. Suitable for Ford, Vauxhall, Opel and
Chrysler vehicles.
Stock No Contents Price
333650 3
⁄8, 1 ⁄2, 5 ⁄8 & 3 ⁄4" Couplings 8.76
Stock No 333644

SEAL & COLLET INSTALLERS/VALVE GRINDING 217
Fuel & Air Con Hose Disconnect Set
Set of two die-cast tools suitable for press-type quick
disconnection joints found on fuel and air con lines.
Swivel action allows quick selection of correct sized tool.
Suitable for Ford, Vauxhall, Opel and Chrysler vehicles..
Stock No Description Price
333652 2 pce Hose Disconnect Set 10.36
Fuel Line Tool Sizes 5 ⁄16, 3 ⁄8"
Air Con Tool Sizes 3 ⁄8, 1 ⁄2, 5 ⁄8, 3 ⁄4"
Valve Collet Installation/Removal Kit
Suitable for the installation and removal of valve collets on
all sizes of engine. Specifically designed for use with valve
spring compressors where access to the collets is limited.
Allows side access to valve collets. Includes magnetic
pick-up tool to retrieve lost collets. Supplied in carry case
Stock No Description Price
333664 4 pce Valve Collet Replacement Kit 31.95
Valve Grinding Kit
For grinding and lapping valves. Supplied complete with
one small pot each of fine and coarse Carborundum
paste.
Stock No Cup Diameters Length Price
331050 19 & 22 mm 240 mm 6.91
Fuel Line Disconnect Set
Set of three pliers suitable for breaking into fuel lines and
hoses fitted with quick release couplings.
Stock No Description Price
333654 3 pce Fuel Line Disconnect Set 22.36
Valve Stem Seal Installer Kit
Sykes Pickavant, Set of drive collets and pilots, for
accurately installing new valve stem seals, without risk of
damage to the seal or spring.
Stock No Description Price
339080 Valve Stem Seal Installer Kit 11.16
Valve Grinding Paste
Carborundum valve grinding compound. Supplied in two
grades.
Stock No Grade Size Price
227960 Fine 500 g 13.48
227962 Coarse 500 g 13.48
Valve Stem Seal Pliers
Steel pliers with vinyl handles. Suitable for the removal
and installation of valve stem seals. Serrated tips aid grip.
Especially suitable for stubborn seals.
Valve Stem Pliers. For 16 and 24 valve OHC engines
Stock No Type Length Price
333656 Straight Head 280 mm 23.16
333658 Angled Head 260 mm 27.45
Valve Collet Installers
Sykes Pickavant. Installs collets without the need for
using a valve spring compressor.
Stock No Size Application Price
339085 5 mm and Above Cars 38.90
339090 Less than 5 mm Motorcycles 38.90
Lapping Compound
Carborundum oil-mixed lapping compound
Stock No Grade Size Price
227980 240 grit 500 g 39.90
Valve Collet Installer/Remover
Spring loaded shaft and clips aid installation and removal
of valve spring collets. Quick retrieval of lost collets using
magnetic tip. Ideal for use on heads with recessed valves.
Stock No Valve Number Length Price
333662 16 & 24 220 mm 10.36
Valve Grinding Sticks
For grinding and lapping valves. With rubber suction ends.
Double Ended Valve Grinder
Stock No Cup Diameters Length Price
331920 19 & 22 mm 240 mm 0.93
Single Ended Valve Grinder
Stock No Cup Diameter Length Price
339095 32 mm 224 mm 1.08
Valve Spring Compressor
Sealey brand. Suitable for most small and medium sized
OHV engines. Adjustable jaw capacity. Handle locks to
keep springs compressed.
Stock No Capacity Throat Depth Price
333666 75 - 165 mm 150 mm 23.16
Stock No 333664

218
VALVE SPRING COMPRESSORS
OHC Valve Spring Compressor
Sealey brand. Suitable for most small and medium sized
OHC engines, and many OHV and CVH engines.
Adjustable jaw capacity. Handle locks to keep springs
compressed.
Stock No Capacity Throat Depth Price
333668 60 - 155 mm 160 mm 29.56
Multi-Valve Valve Spring Compressor
Draper brand. Suitable for use on multi-valve petrol and
diesel engines with deep seated valves, and many OHC,
OHV and CVH engines. Twin cam action allows use from
above or below valve.
Stock No Capacity Throat Depth Price
331010 55 - 175 mm 165 mm 43.89
Valve Holding Adaptor
Sealey brand. Screws into 14 and 18 mm spark plug ports.
Uses standard workshop air supply (90-125 psi) to
compress air into engine cylinder. Air cylinder pressure
then holds valve in place when air supply is cut. Fitted
with standard bayonet air-line connector.
Stock No Description Price
333672 Valve Holding Adaptor 7.16
Valve Spring Compressor
Sealey brand. Suitable for use on most OHV, OHC and CVH
engines. Used in conjunction with valve holding adaptor, it
permits replacement of valve springs and valve stem
seals without having to remove the cylinder head.
Reversible jaw adaptor. Automatic cam action lock. Not
suitable for engines with deep seated valves.
Stock No Description Price
333674 Valve Spring Compressor 23.96
Universal Valve Spring Compressor
Draper brand. Suitable for use on OHV and OHC petrol
and diesel engines. Kit allows replacement of valve
springs and valve stem seals without having to remove
the cylinder head. Kit contains
• 2 x adjustable support pillars
• Beam
• Multi-position lever arm
• Valve spring adaptor
• Valve holding adaptor
• Air line and air line connectors
• Valve collet installer/remover
• Supplied in carry case
Stock No Description Price
331935 Universal Valve Spring Compressor 77.42
Heavy Duty Valve Spring Compressor
Sykes Pickavant tool for use on commercial and off-road
engines. Jaw capacity adjusted by geared hand wheel.
Supplied with straight and off-set jaws.
Stock No Capacity Throat Depth Price
339100 75 - 186 mm 245 mm 63.60
Jaw Capacity Straight Jaw 95 - 186 mm
Offset Jaw 75 - 165 mm
CVH Valve Spring Compressor
Sealey brand. Suitable for Ford CVH engines. Permits
valve stem seal and valve spring replacement without the
need to remove the cylinder head. 1" hex drive.
Stock No Description Price
333670 CVH Valve Spring Compressor 12.76
Valve Spring Compressor
Sealey brand. Suitable for use on most OHV and OHC
engines. Used in conjunction with valve holding adaptor, it
permits replacement of valve springs and valve stem
seals without having to remove the cylinder head.
Adjustable handle, claws and hooks. Not suitable for
engines with deep seated valves.
Stock No Description Price
333676 Valve Spring Compressor 29.56
Sealey Cylinder Head Service Set
Professional, upper engine service kit enables in situ
replacement of valve springs and valve stem seals,
without the need to remove the cylinder head. Suitable
for use on OHV and OHC petrol and diesel engines. Kit
contains
• 2 x adjustable support pillars
• Beam
• Multi-position lever arm
• Valve spring adaptor
• Valve holding adaptor
• Air line and air line connectors
• Valve collet installer/remover
• Valve stem seal pliers - straight
• Valve stem seal pliers - angled
• Valve collet installer/remover
• Valve stem seal installer kit
• Supplied in carry case
Stock No Description Price
333678 20 pce Cylinder Head Service Set 159.96
Stock No 333678

VALVE SPRING COMPRESSORS/SPARK PLUG TOOLS 219
Valvemaster Service Centre
Sykes Pickavant valve spring compressing system that
allows replacement of valve springs and valve stem seals
without the need to remove the cylinder head. Universal
mounting brackets. Suitable for OHV and OHC petrol and
diesel engines. Kit contains
• 2 x adjustable support pillars
• Beam
• Multi-purpose lever arm
• 4 x valve spring adaptors
• Valve holding adaptor
• Valve stem seal pliers
• Valve stem seal installer kit
• Telescopic magnetic pick-up tool
• Supplied on storage panel
Stock No Description Price
339105 Valvemaster Service Centre 356.00
Mechanics Stethoscope
Suitable for detecting faults in engines, bearings and
other moving parts. Supplied with two probes, 290 mm
long.
Stock No Description Price
331090 Mechanics Stethoscope 11.78
Long Reach Spark Plug Wrenches
For access to deep seated spark plugs. Made from zinc
plated carbon steel, with integral tommy bar. With rubber
insert for spark plug protection and retention.
Stock No Plug Size Length Price
331965 10 mm 300 mm 3.66
331970 14 mm 300 mm 3.66
Rocker Arm & Valve Compensator Tool
For use on Vauxhall and Opel OHC engines. Permits quick,
on vehicle, removal of rocker arm and valve play
compensator. Mounts on camshaft housing.
Stock No Description Price
331940 Rocker Arm & 13.02
Valve Compensator Tool
Cylinder Head Stands
Sykes Pickavant. Essential for working on aluminium
heads, including OHC. Set of 2 high quality steel pillars
that support the cylinder head. Fit stud holes 9 to 18 mm
diameter.
Stock No Description Price
339110 Cylinder Head Stands 30.82
Spark Plug Boot Pliers
Draper brand. Heavy duty pattern, designed to remove
spark plug boot without pulling the lead from its clip.
Angled nose gives easier access.
Stock No Length Price
331950 230 mm 10.62
Spark Plug Boot Tongs
Sealey brand. Fully insulated tongs designed for the
installation and removal of spark plug boots. Reduces risk
of shock or burns when working on operating ignition
system.
Stock No Length Price
333680 160 mm 3.56
Spark Plug Wrenches
Draper brand. Swivel wrenches made from chrome
plated, forged steel. With rubber insert for spark plug
protection and retention. Plastic coated T handle.
Stock No Plug Size Price
331955 10 mm 4.10
331960 14 mm 4.10
Spark Plug Cleaning Brush
Compact brush with dense brass fill. Wooden handle. For
cleaning spark plugs and electrical terminals. Overall
length 225mm.
Stock No Rows Wire Length Price
229062 3 15mm 1.36
Ignition File
Small smooth file for cleaning contact points and
electrical terminals. Complete with two thickness gauges,
0.015" for contact points and 0.025" for spark plugs.
Stock No Description Price
331980 Ignition File 1.94
We accept Visa and Mastercard
Debit and Credit Cards
Stock No 331090

220
SPARK PLUG/PISTON RING/CYLINDER HONES
Spark Plug Runner
Dual purpose tool. For installing deep seated spark plugs,
helps prevent cross threading. Suitable for 10, 12, 14 and
18 mm plugs. Also supplied with small and large suction
heads for valve lapping.
Stock No Description Price
333682 Plug Runner/ Valve Lapping Tool 7.95
Fan Belt Tightening Wrench
Suitable for use on most alternators. Simplifies a normally
awkward task.
Stock No Square Drive Price
333694 1
⁄2" 9.70
Piston Ring Groove Cleaner
Fast and reliable removal of carbon and glaze deposits
from piston ring grooves. Suitable for pistons 51 mm to
127 mm diameter. Supplied with three six-bladed cutters.
Stock No Description Price
333708 Piston Ring Groove Cleaner 16.76
Blade Sizes Cutter 1: 1 ⁄16, 5 ⁄64, 3 ⁄32, 1 ⁄8, 5 ⁄32, 3 ⁄16"
Cutter 2: 2, 2.5, 3, 4, 4.5mm, 1 ⁄4"
Cutter: 1.2, 1.5, 1.8, 2.8, 5, 5.5 mm
Spark Plug Thread Chasers
Used to clean spark plug threads. Will also restore minor
thread damage. Use with spark plug wrench.
Stock No Sizes Price
333684 10 & 12 mm 7.00
333686 14 & 18 mm 7.00
Glow Plug Analyser
Sealey brand. Enables fast diagnosis of glow plug failure
or degradation without the need to remove the plug from
the engine. Suitable for use on any 12 v vehicle system
and connects directly to vehicle battery. Features six LED
diagnostic read-out.
Stock No Description Price
333688 Glow Plug Analyser 87.00
Piston Ring Compressors
Quality construction with spring steel wraps and ratchet
action tightening mechanism. Supplied with steel key.
Stock No Capacity Depth Price
332060 53 - 125 mm 75 mm 4.51
332065 53 - 175 mm 75 mm 15.16
332070 60 - 175 mm 100 mm 11.74
332080 60 - 175 mm 150 mm 21.56
Wrinkle Band Compressors
Wrinkled spring steel compression band reduces surface
contact friction and prevents tool from slipping into cylinder
bore. Cam action compression allows quick, one time
setting of piston diameter.
Stock No Capacity Depth Price
333704 76 - 127 mm 37 mm 13.16
Cylinder Hone 25-57 mm
Draper brand. Honing and deglazing tool for use on small
bore cylinders. Flexible drive shaft allows easy alignment
while working. Suitable for use with electric or air drill.
Supplied complete with 220 grit stone set, which is
available separately.
Stock No Description Price
331130 Cylinder Hone 25-57 mm 8.14
331150 Stone Set 220 grit 4.26
Cylinder Hone 51-177 mm
Infrared Digital Thermometer
Sealey infrared digital thermometer with laser sight. Helps
diagnose engine and other vehicle faults. Measures infrared
energy and displays temperature at infrared source. Laser
beam indicates point being sampled. Temperature, in either
°C or °F, is displayed on a large LCD panel with
back-lit display. Supplied with belt pouch.
Stock No Temperature Range Price
333690 - 50 to 280 °C -58 to 536 °F 71.96
Piston Ring Installation Pliers
Installs and removes piston rings. Spring return handles
with vinyl grips.
Stock No Length Ring Sizes Price
332010 170 mm 3
⁄64 - 1 ⁄4" 5.56
Draper brand. Honing and deglazing tool for use on
standard bore cylinders found on car, van , truck, marine
and industrial engines. Flexible drive shaft allows easy
alignment while working. Suitable for use with electric or
air drill. Overall length 300 mm. Supplied complete with
180 grit stone set. Other stone sets available. Length of
stones 100 mm.
Stock No Description Price
331140 Cylinder Hone 51 - 177 mm 22.59
331154 Stone Set 120 grit 9.12
331155 Stone Set 180 grit 9.12
331156 Stone Set 280 grit 9.12
For ease and accuracy when placing orders please use our stock number

CYLINDER HONES/COMPRESSION TESTERS 221
Sykes Pickavant Cylinder Hone 13-89 mm
Honing and deglazing tool. Flexible drive shaft allows
easy alignment while working. Suitable for use with
electric or air drill. Supplied complete with 220 grit stone
set. Other stone sets are available. Each stone set
contains 3x19 mm stones, 3x29 mm stones and 3x50 mm
stones complete with spring clips.
Stock No Description Price
330030 Cylinder Hone Set 13 - 89 mm 35.20
339120 Stone Set Coarse 100 grit 18.00
339125 Stone Set Medium 220 grit 18.00
339130 Stone Set Fine 400 grit 18.00
Professional Engine Compression Tester
Draper brand. Suitable for use on most petrol engined
cars and light commercials. Gauge has 57 mm diameter
face with heavy rubber bumper. Dual scale, 0 - 290 psi
and 0 - 20 bar. Fitted with pressure release valve to allow
rapid retesting. Supplied with flexible hose, 14 mm/18 mm
adaptor, 10 mm and 12 mm adaptors and 14 mm extension
adaptor. Also includes 10 mm/12 mm and 14 mm/18 mm
spark plug thread chasers. Supplied in blow moulded
carry case.
Stock No Description Price
337108 Petrol Engine Compression Tester 99.68
Petrol Engine Compression Tester Set
Sealey brand. Suitable for use on most petrol engines.
Gauge has 63 mm diameter face with 0 - 300 psi and
0 - 20 kg/cm 2 scales. Fitted with quick-coupling adaptor.
Supplied complete with 130 mm straight and angled
push-on connectors, 400 mm flexible hose, 14 mm and 18
mm adaptor and 14 mm long reach adaptor. Supplied in
carry case.
Stock No Description Price
333714 Compression Tester Kit 39.96
Sykes Pickavant Cylinder Hone 50-180 mm
Honing and deglazing tool for use on standard bore
cylinders found on car, van, truck, marine and industrial
engines. Flexible drive shaft allows easy alignment while
working. Overall length 315 mm. Supplied complete with
220 grit stone set. Other stone sets available. Length of
stones 100 mm. Each stone set contains three stones
complete with cotter pins.
Stock No Description Price
330040 Cylinder Hone 50 - 180 mm 36.00
330070 Stone Set Coarse 10 grit 16.40
330060 Stone Set Medium 220 grit 16.40
330050 Stone Set Fine 400 grit 16.40
Petrol Engine Compression Tester
Draper brand. Helps diagnose engine faults by measuring
compression pressure. Suitable for use on most petrol
engines including motorcycles. Large, easy-to-read
scale, 0 - 300 psi and 0 - 21 bar. Complete with flexible
hose and 10 mm and 14 mm threaded adaptors. Air
release valve allows rapid retesting.
Stock No Description Price
331160 Compression Tester 18.72
Long Reach Adaptor
Use in conjunction with Draper petrol engine compressor
testers for work on engines with deep seated spark
plugs. Thread sizes 14 mm and 18 mm with adaptor for 10
mm and 12 mm threads.
Stock No Description Price
337110 Compression Tester Adaptor 16.69
Push-On Compression Testers
Sealey brand. Suitable for use on most petrol engines
including motorcycle and small portable units. Gauge has
63 mm diameter face with 0 - 300 psi and 0 - 20 kg/cm 2
scales. Complete with rigid stem (angled or straight) and
push-on cone connector.
Stock No Description Price
333710 Angled 15.96
333712 Straight 15.96
Petrol Engine Vacuum And Fuel Pump Tester
Draper brand. Engine and fuel line diagnostic tool.
Supplied with gauge, flexible hose and adaptors.
Stock No Description Price
337112 Petrol Engine Vacuum Tester 10.41
Mityvac Automotive Test Kit
Made in USA. For testing and diagnostics of vacuum and
pressure related automotive systems. Can also be used
for fluid transfer and brake bleeding. The kit contains the
powerful Mityvac hand vacuum pump with 16cc of
volume displacement per stroke, and the capability of
attaining and holding 25 inches Hg/85kpa of vacuum. Kit
also contains 4oz fluid reservoir with transfer and storage
lids, tapered hose adaptors and plugs, bleed screw
adaptors, rubber cup adaptor and connection hoses.
Supplied in carry case.
Stock No Description Price
332300 Vacuum Test Kit 71.91
Stock No 337112

222
COMPRESSION TESTERS/ENGINE SETTING
Petrol Engine Cylinder Leakage Tester
Sealey brand. Powered by workshop compressed air
supply and used to detect a range of common engine
faults including worn piston rings, worn valves, cracks in
cylinder walls and blown head gaskets. Gauges shows %
of cylinder leakage. Suitable for use on any petrol engine
with 14 or 18 mm spark plugs. Supplied in carry case.
Stock No Description Price
333716 Engine Cylinder Leakage Tester 77.00
Compression Tester Adaptors
Dummy injectors and glowplugs. Adapt stock number
331400 diesel engine compression tester for use on wide
range of European and Asian cars and vans.
Stock No Description Price
337116 Stanadyne Injector 17.15
337118 D1 Type Injector 17.15
337120 Injector M20 16.30
337122 Injector M24 16.74
337124 Glow Plug M10 15.44
337126 Glow Plug M10 x 114.5 mm 17.15
337128 Glow Plug M10 x 119 mm 16.74
337130 Glow Plug M12 15.44
337132 Glow Plug M14 15.44
Diesel Engine Setting/Locking Kit
Sealey 9 pce kit. Suitable for setting and locking all
current Ford diesel engines except Focus, but including
1.8 TD/DI and Galaxy. Also includes tools for locking
Volkswagen, Audi, Volvo, Mazda 121, Seat and Skoda.
Supplied in carry case with operating guide.
Stock No Description Price
333720 Ford/VAG Diesel Engine Kit 62.76
Applications: Please call our sales team or visit the
Sealey website on www.sealey.co.uk
Diesel Engine Compression Tester
Draper brand. Suitable for compression testing of cars
and light commercial vehicles with direct or indirect
injection. Gauge has 57 mm diameter face with heavy
rubber bumper. Dual scale gauge, 0-1000 psi and 0-70 bar,
with 355 mm flexible hose, pressure release valve and
quick release coupling. Kit includes
• 5 x glowplug adaptors
• 4 x injector adaptors
• 90°coupling adaptor
• 25 mm clamp plate
• Replacement seal and washer set
Stock No Description Price
331400 Diesel Engine Compression Tester 142.41
Oil Pressure Test Kit
Draper brand. Tests oil pump pressure and low oil
warning indicators. Gauge has 57 mm diameter face with
heavy rubber bumper. Dual scale gauge, 0-145 psi and
0-10 bar, with 1300 mm flexible hose and quick release
coupling plus ten adaptors to fit most modern vehicles.
Supplied in carry case.
Stock No Description Price
337134 Oil Pressure Test Kit 99.68
Diesel & Petrol Engine Setting/Locking Kit
The most comprehensive kit for Ford cars and carderived
vans. Tools suitable for engine timing and timing
belt replacement on the complete range of Zetec 16 valve
petrol engines and 1.8 diesels and turbo diesels including
the 1.8 direct injection Endura engine.
Stock No Description Price
333722 Ford/Mazda Engine Kit 137.95
Applications: Please call our sales team or visit the
Sealey website on www.sealey.co.uk
Commercial Vehicle Mandrel Set
Adapts stock number 331400 diesel engine compression
tester for use on commercial, agricultural, marine and
industrial engines. Includes Stanadyne dummy injector.
Stock No Description Price
337114 Compression Tester Adaptor Kit 55.20
Stock No 333724
Ford Diesel Engine Setting/Locking Kit
Sealey 8 pce kit. Suitable for Ford 1.6 and 1.8 diesel
engines as fitted to Fiesta, Escort, Orion, P100, Sierra and
Mondeo. Also Transit 2.5 DI and Galaxy 1.9 TD.
Stock No Description Price
333718 Ford Diesel Engine Kit 27.96
Crankshaft Pulley Remover & Installer
Ford. Suitable for removal and installation of free-floating
crankshaft pulley. Essential tool for timing belt
replacement on certain Zetec 16 valve engines.
Stock No Description Price
333724 Ford Crankshaft Pulley Tools 111.96
Applications: Ford 1.25, 1.4, 1.6 and 1.7 16v twin cam
petrol engines, Ford Fiesta and Puma.
Large volume user and require a quotation?
Call Grahame our Sales Director on 01224 615030

ENGINE SETTING & LOCKING 223
Diesel Engine Setting/Locking Kit
Ford/VAG. Suitable for engine timing and belt
replacement procedures on Pumpe Duse diesel engines
fitted to VAG vehicles and Ford Galaxy (1999 on). Set
contains crank locking tool, camshaft pin and tensioner
tools to suit 1.2 TDi, 1.4 TDi and 1.9 TDi engine variants.
Stock No Description Price
333726 Ford/VAG Engine Kit 118.45
Applications: Please call our sales team or visit the
Sealey website on www.sealey.co.uk
Petrol Engine Setting/Locking Kit
Ford/Mazda. Camshaft setting and locking plate. Suitable
for Zetec engines found in Focus, Mondeo and Couger
(1998 on). Also Ford 1.6, 1.8 and twin cam 16 valve petrol
engines. Crankshaft TDC location for Ford 1.25 and 1.4
engines and Puma 1.7 engine. TDC pin also suitable for
Mazda 121 1.25 petrol engines.
Stock No Description Price
333732 Ford/Mazda Engine Kit 45.95
Diesel Engine Setting/Locking Kit
Vauxhall/Opel. Flywheel and crankshaft setting plate and
locking pin with injection pump locking pin.
Stock No Description Price
337136 GM Setting/Locking Kit 14.59
Applications: Vauxhall/Opel X17DTL 1.7 diesel engines
Petrol Engine Setting/Locking Kit
Ford/Mazda. Camshaft setting and locking plate. Suitable
for Ford 1.6, 1.8 and twin cam 16 valve petrol engines.
Crankshaft TDC location for Ford 1.25 and 1.4 engines and
Puma 1.7 engine. TDC pin also suitable for Mazda 121
1.25 petrol engines.
Stock No Description Price
333728 Ford/Mazda Engine Kit 12.90
Diesel Timing Kit
Vauxhall/Opel. Suitable for GM vehicles from 1987
onwards. Kit includes
• Camshaft setting tool
• Flywheel and crankshaft setting tool
• Dial gauge
• Locking pins and locking bolts
Stock No Description Price
333200 GM Diesel Timing Kit 134.36
Use in conjunction with stock number 333202 for
accurately setting valve timing.
Petrol Engine Setting/Locking Kit
Vauxhall/Opel. Locking and setting tools for V6 Ecotec
multivalve engines. Use to maintain crankshaft gear and
camshaft sprockets at TDC for belt removal and
installation. Includes timing gauge for checking camshaft
sprocket timing mark during installation.
Stock No Description Price
333201 GM/Saab Setting/Locking Kit 201.56
Applications: Vauxhall/Opel Cavalier/Vectra/Calibra 2.5
and 3.0 litre engines. Saab 900 2.5V6, 9000 3.0 V6
Diesel Engine Setting/Locking Plate
Ford. Camshaft setting and locking plate. Suitable late
model Ford 1.8 diesel engines found in Fiesta 1.8D, Escort
1.8D & 1.8TD and Mondeo 1.8TD (1995 on)
Stock No Description Price
333730 Ford Setting/Locking Plate 6.50
Camshaft Setting/Adjusting Tool
Vauxhall/Opel. Used in conjunction with stock number
333200. Provides means of rotating camshaft by small
increments to obtain cam lobe reading necessary for
accurately setting valve timing. Also restrains camshaft
while retightening sprocket bolt.
Stock No Description Price
333202 GM Camshaft Setting Tool 105.00
Applications: GM diesel 1.6 and 1.7 OHC engines
Diesel Engine Setting/Locking Kit
Vauxhall/Opel. For timing and setting Di series Eco Tec
engines. Includes camshaft setting and locking tools and
timing adjustment assembly which is used to fix fuel
pump timing and cam sprocket position during engine
timing procedure.
Stock No Description Price
333734 GM Setting/Locking Kit 142.76
Applications: Vauxhall/Opel X20 DTL, X20 DTH, X22 DTH
2.0 and 2.2 litre Eco Tec diesel engines.
Stock No 337136

224
ENGINE SETTING & LOCKING
Petrol Engine Setting/Locking Kit
Vauxhall/Opel. Includes camshaft setting plate,
crankshaft locking pin, chain tensioner locking pin and
timing disc position gauge, essential for establishing the
correct position of the timing sensor disc located on the
inlet camshaft sprocket.
Stock No Description Price
333736 GM Setting/Locking Kit 75.56
GM Camshaft Locking Tool
For locking single camshafts on Vauxhall/Opel Eco Tec
1.4 and 1.6 litre 16 valve petrol engines. Made from tough
nylon.
Stock No Description Price
337140 GM Camshaft Locking Tool 4.40
GM Camshaft Locking Tool
For locking single camshafts on Vauxhall/Opel and Isuzu
engines. Made from anodised aluminium.
Stock No Description Price
337148 GM/Saab Camshaft Locking Tool 13.43
Applications: GM 1.2, 1.4, 1.6, 1.8 and 2.0 OHC petrol
engines
Saab 900 2.5 V6 and 9000 3.0 V6 petrol
engines
GM 1.6 and 1.7 OHC diesel engines
Isuzu 1.6 and 1.7 diesel engines
GM Camshaft Locking Tool
For locking single camshafts on Vauxhall/Opel Eco Tec
1.4 and 1.6 litre 16 valve petrol engines. Made from
anodised aluminium.
Stock No Description Price
337142 GM Camshaft Locking Tool 13.43
Petrol Engine Timing Belt Tensioner
Vauxhall/Opel. Tensioner wrench and tension retaining
pin, used to remove the tension in the belt so that it can
be safely removed.
Stock No Description Price
333738 GM Timing Belt Tensioner 41.00
Applications: Vauxhall/Opel X10XE, X12XE 1.0 and 1.2 litre
Eco Tec petrol engines.
GM Camshaft Locking Tool
For locking single camshafts on Vauxhall/Opel Eco Tec
1.8 and 2.0 litre 16 valve petrol engines. Made from
anodised aluminium.
Stock No Description Price
337144 GM Camshaft Locking Tool 13.43
Petrol Engine Setting/Locking Kit
Fiat 1.2 litre. Kit includes piston positioning tools,
camshaft setting tools and cam belt tension adjuster.
Stock No Description Price
333742 Fiat Setting/Locking Kit 157.56
Applications: Fiat 1.2 litre 16 valve twin cam petrol
engines
Belt Guide Roller Adjuster
Vauxhall/Opel. For adjusting the position of the upper and
lower guide rollers for the timing belt on the V6 Eco Tec
engine. Use in conjunction with stock number 333201
setting/locking kit.
Stock No Description Price
333740 GM Belt Guide Roller Adjuster 50.36
GM Camshaft Locking Tool
For locking single camshafts on Vauxhall/Opel 2.5 and 3.0
litre engines. Also Saab 900 2.5 V6 and 9000 3.0 V6 petrol
engines.
Stock No Description Price
337146 GM/Saab Camshaft Locking Tool 13.43
Petrol Engine Setting/Locking Kit
Fiat 1.4 litre. Kit includes camshaft setting plate and
crankshaft locking tool.
Stock No Description Price
333744 Fiat Setting/Locking Kit 71.56
Applications: Fiat 1.4 litre SOHC petrol engines
Stock No 333740
GM Camshaft Locking Tool
For locking twin camshafts on Vauxhall/Opel Eco Tec 1.8, 2.0
and 2.2 litre 16 valve petrol engines. Made from tough nylon.
Stock No Description Price
337138 GM Twin Cam Locking Tool 4.24

ENGINE SETTING & LOCKING 225
Petrol Engine Setting/Locking Kit
Fiat 1.6 litre. Kit includes camshaft setting plates, cam
belt tension adjuster and flywheel retention tools. Use in
conjunction with stock number 333220, mini dial gauge,
and stock number 333222, Fiat TDC position tool.
Stock No Description Price
333746 Fiat Setting/Locking Kit 163.16
Applications: Fiat 1.6 litre 16 valve petrol engines (1995 on)
Fiat TDC Position Tool
Used in conjunction with stock number 333220, mini dial
gauge, to find piston TDC position when using some Fiat
and Alfa Romeo setting/locking kits.
Stock No Description Price
333222 Fiat TDC Position Tool 51.96
Diesel Engine Setting/Locking Kit
Fiat 1.9 litre (Turbo). Set includes crankshaft locking tool
and camshaft setting tool.
Stock No Description Price
333758 Fiat Setting/Locking Kit 77.45
Applications: Fiat 1.9 DT
Petrol Engine Setting/Locking Kit
Fiat 1.8 litre, suitable for both variants of the engine. Kit
includes camshaft setting plates, cam belt tension
adjuster and flywheel retention tools. Use in conjunction
with stock number 333220, mini dial gauge, and stock
number 333222, Fiat TDC position tool.
Stock No Description Price
333748 Fiat Setting/Locking Kit 147.45
Applications: Fiat 1.8 litre 16 valve petrol engines (1995 on)
Mini Dial Gauge
Compact design and precision mechanism, ideal for
automotive applications and general workshop use.
Stock No Range Graduations Price
333220 8 mm 0.01 mm 27.96
Face Diameter 42 mm
Shank Diameter 8 mm
Prices shown are indicative prices.
For current prices call 01224 620944
or email: sales@gibbtools.co.uk
Diesel Engine Setting/Locking Kit
Fiat 1.9, 2.1 and 2.4 litre engines.
Stock No Description Price
333752 Fiat Setting/Locking Kit 83.56
Applications: Fiat 1.9D/TD/JTD, 2.1TD and 2.4TD
Diesel Engine Setting/Locking Kit
Fiat 1.7 litre. Set includes crankshaft locking tool and
camshaft setting tool.
Stock No Description Price
333754 Fiat Setting/Locking Kit 77.45
Applications: Fiat 1.7D and 1.7DT
Diesel Engine Setting/Locking Kit
Fiat 1.9 litre (Non-Turbo). Set includes crankshaft locking
tool and camshaft setting tool.
Stock No Description Price
333756 Fiat Setting/Locking Kit 77.45
Applications: Fiat 1.9D
Petrol Engine Setting/Locking Kit
Alfa Romeo twin cam engines. Set includes camshaft
setting plates and timing belt tensioner tool.
Stock No Description Price
333760 Alfa Romeo Setting/Locking Kit 152.45
Applications: Alfa Romeo 1.4, 1.6, 1.8 and 2.0 litre twin cam,
Twin Spark petrol engines.
Petrol Engine Setting/Locking Kit
Alfa Romeo 2.5V6 quad cam engine. Set includes
camshaft setting plates and timing belt tensioner tool.
Use in conjunction with stock number 333220, mini dial
gauge, and stock number 333222, Fiat TDC position tool.
Stock No Description Price
333762 Alfa RomeoSetting/Locking Kit 214.36
Applications: Alfa Romeo 2.5V6 petrol engine (1997on)
Stock No 333758

226
ENGINE SETTING & LOCKING
Diesel & Petrol Engine Setting/Locking Kit
Volkswagen/Audi. Comprehensive set of essential setting
and locking tools for a huge range of petrol and diesel
engines. Includes camshaft setting tool, injector pump
locking tools and timing belt tensioner tool.
Stock No Description Price
333764 VAG Setting/Locking Kit 133.95
Applications: Volkswagen, Audi, Seat, Skoda diesel and
petrol engines
Diesel Engine Setting/Locking Kit
Volkswagen/Audi. Set includes setting and locking tools,
front valance access sliding pins and timing belt
tensioner tool.
Stock No Description Price
333766 VAG Setting/Locking Kit 151.16
Applications: Volkswagen, Audi 2.5 TDiV6 diesel engines
Crank Pulley Holding Tool
Seat. Suitable for holding the crankshaft on selected Seat
twin cam petrol engines.
Stock No Description Price
333770 Seat Crankshaft Holding Tool 90.36
Applications: Please call our sales team or visit the
Sealey website on www.sealey.co.uk
Camshaft & Crankshaft Tools
Audi V6 petrol engines. Essential tools for locating the
camshafts and crankshaft during timing belt replacement
and other service applications.
Stock No Description Price
333772 Audi V6 Cam/Crankshaft Kit 107.56
Applications: Audi 80, 100, A4, A6, A8 Coupe/Cabrio
2.6/2.8 ABC/AAH
Camshaft & Crankshaft Tools
Volkswagen/Audi petrol engines. Essential tools for
locating the camshafts and crankshaft during timing belt
replacement and other service applications.
Stock No Description Price
333774 VW/Audi V6 Cam/Crankshaft Kit 88.36
Applications: Audi A4, A6 2.4 & 2.8 (1997on) ALG, S4 2.7
Turbo (1997on) AGB, Volkswagen Passat 2.8 (1996on) ACK
Crank Pulley Holding Tool
VAG. Suitable for VW Group 1.4 and 1.6 16 valve twin cam
petrol engines from 1997 onwards. Used in conjunction
with stock number 333230, camshaft setting tool, for
timing belt replacement.
Stock No Description Price
333776 VAG Crank Pulley Holding Tool 90.36
Applications: Volkswagen 1.4 and 1.6 16 valve twin cam
petrol engines (1997on). Engine types ARC, ATN, AUS,
AVY, AZD
Crank Pulley Holding Tool
VAG. Suitable for VW Group 1.4 and 1.6 16 valve twin cam
petrol engines from 1997 onwards. Used in conjunction
with stock number 333230, camshaft setting tool, for
timing belt replacement.
Stock No Description Price
333778 VAG Crank Pulley Holding Tool 72.76
Applications: Volkswagen, Audi 1.4 and 1.6 16 valve twin
cam petrol engines (1997on). Engine types AFK, AHW,
AJV, AKQ, APE, AQQ, AUA, AUB, AXP, AFH.
Volkswagen Camshaft Locking Tool
For locking camshafts on Volkswagen diesel engines.
Stock No Description Price
337150 Volkswagen Camshaft Locking Tool 10.62
Applications: Lupo 1.2TDI, 1.4TDI, Polo 1.4 TDI, Golf
1.9TDI, Bora 1.9TDI, Passat 1.9TDI.
Diesel Engine Setting/Locking Kit
Ford/VAG. Suitable for engine timing and belt
replacement procedures on Pumpe Duse diesel engines
fitted to VAG vehicles and Ford Galaxy (1999on). Set
contains crank locking tool, camshaft pin and tensioner
tools to suit 1.2TDi, 1.4TDi and 1.9TDi engine variants.
Stock No Description Price
333726 Ford/VAG Engine Kit 118.45
Applications: Please call our sales team or visit the Sealey
website on www.sealey.co.uk
Camshaft Setting Tool
VAG. Suitable for Volkswagen 1.4 and 1.6 twin cam/twin
belt engines from 1997 onwards. Dependant on engine
variant, either the bridge and pins together or the pins
alone are used.
Stock No Description Price
333230 VAG Camshaft Setting Tool 53.96
Applications: Volkswagen, Audi, Seat, Skoda 1.4 and 1.6 16
valve twin cam petrol engines (1997on)
Tension Adjuster
VAG. Specialist wrench for adjusting timing belt tension
on VW group petrol engines.
Stock No Description Price
333780 VAG Tension Adjuster 24.36
Applications: Please call our sales team or visit the
Sealey website on www.sealey.co.uk

ENGINE SETTING & LOCKING 227
Petrol Engine Timing Tool Kit
BMW. 2pce set of locking tools for camshaft and crankshaft
timing positions, essential for timing belt and chain changes.
Precision machined components. Suitable for BMW M40
and M43 engines fitted to 316i, 318i and 518i vehicles.
Stock No Description Price
333782 BMW Timing Kit 55.96
Diesel & Petrol Engine Setting/Locking Kit
Citroen, Peugeot. Comprehensive range of setting and
locking tools for Citroen and Peugeot diesel and petrol
engines.
Stock No Description Price
333788 Citroen/Peugeot Setting/Locking Kit 153.96
Applications: Please call our sales team or visit the Sealey
website on www.sealey.co.uk
Petrol Engine Setting/Locking Kit
Citroen, Peugeot, Renault V6 engines. Setting and locking
tools for Renault 3.0 V6 (L7X) and Citroen/Peugeot V6
(XFZ) engines (1997-2001). Set contains camshaft and
crankshaft locking pins, camshaft holding tool, tensioner
tools and timing pin for checking valve timing position.
Stock No Description Price
333794 Citroen/Renault Setting/Locking Kit 137.16
Applications: Please call our sales team or visit the Sealey
website on www.sealey.co.uk
Petrol Engine Setting/Locking Kit
BMW twin cam. Setting, locking and timing kit, essential
for timing chain, sprocket or camshaft removal. Includes
setting/locking plate, crankshaft TDC pin and secondary
chain timing tool. Suitable for M42, M44 and M50 twin
cam engines.
Stock No Description Price
333784 BMW Setting/Locking Kit 171.45
Diesel & Petrol Engine Setting/Locking Kit
Renault. Comprehensive range of setting and locking
tools for Renault diesel and petrol engines.
Stock No Description Price
333790 Renault Setting/Locking Kit 113.56
Applications: Please call our sales team or visit the Sealey
website on www.sealey.co.uk
Petrol Engine Setting/Locking Kit
Renault. Setting and locking tools for Renault 1.4, 1.6, 1.8
and 2.0 litre 16 valve engines.
Stock No Description Price
333796 Renault Setting/Locking Kit 78.95
Applications: Please call our sales team or visit the Sealey
website on www.sealey.co.uk
Diesel & Petrol Engine Timing Kit
Citroen, Peugeot, Renault diesel and petrol engines. The
most complete kit of timing and setting/locking tools for
French engines available. Suitable for new Di and twin cam
engines. Includes tools for camshaft, injection pump, crank
lock, tension adjustment, twin cam setting and injection
timing adjustment. Includes unique Multi-lock timing device,
which locks camshaft to fuel injection pump in sync.
Stock No Description Price
333786 French Vehicle Timing Kit 478.76
Setting/Locking: Citroen, Peugeot, Renault diesel and
petrol engines. Also some Fiat, Iveco, Vauxhall, Rover,
Volvo, LDV, Chrysler, Mitsubishi, FSO and Tata engines.
Fuel Injection Pump Timing/Adjustment: Renault RAM
timing system and PSA EPIC injection pumps.
Diesel Engine Setting/Locking Kit
Citroen, Peugeot. Setting and locking tools for new PSA
common rail diesel engines designated DW8 (1.9D) and
DW10/DW12 (2.0/2.2 Hdi)
Stock No Description Price
333792 Citroen/Peugeot Setting/Locking Kit 136.95
Applications: Please call our sales team or visit the Sealey
website on www.sealey.co.uk
Petrol Engine Setting/Locking Kit
Citroen, Peugeot PSA 16 valve. Setting and locking tools
for 1.8 and 2.0 litre PSA twin cam 16 valve engines. Also
suitable for Hpi version of the 2.0 litre engine.
Stock No Description Price
333798 Citroen/Peugeot Setting/Locking Kit 79.45
Applications: Please call our sales team or visit the Sealey
website on www.sealey.co.uk

228
ENGINE SETTING & LOCKING
Flange Repositioning Tool
Citroen, Peugeot. Used on the Hpi versions of the 2.0 litre
PSA twin cam 16 valve engine to counterhold the crank
pulley flange while turning the centre bolt during final
timing adjustment.
Stock No Description Price
333800 Flange Repositioning Tool 23.00
Diesel Engine Setting/Locking Kit
Rover. Suitable for Rover group diesel engines. Made
from cropped steel stock, chemically treated for
corrosion protection.
Stock No Description Price
333808 Rover Setting/Locking Kit 35.95
Applications: Please call our sales team or visit the Sealey
website on www.sealey.co.uk
Crankshaft Pulley Holding Tool
Land Rover and Rover KV6. Used in conjunction with
stock number 333240, Land Rover petrol engine locking
kit, to counterhold the crank pulley whilst turning the
centre bolt.
Stock No Description Price
333242 Crankshaft Pulley Holding Tool 83.96
Tension Adjuster
Renault. Peg style adjustment tool required to apply
tension to timing belt on Renault diesel engines.
Stock No Description Price
333802 Renault Tension Adjuster 35.00
Applications: Renault Fuego R18, R20, R21, R25, R30,
Espace, Trafic, Master - J8S diesel engine
Diesel Engine Locking Kit
Land Rover and Rover. Set contains flywheel locking tool,
injection pump tool and cam belt tensioner tool.
Stock No Description Price
333812 Land Rover Locking Kit 46.36
Applications: Rover 2200, 4200, 6200 Land Rover
Freelander 2.0 L series diesel engines.
Tension Adjuster
Renault. Specialist adjustment tool required to apply
tension to timing belt on Renault diesel engines.
Stock No Description Price
333804 Renault Tension Adjuster 25.00
Applications: Renault Laguna 2.2D (1994-96) G8T diesel
engine.
Camshaft Locking & Injection Pump Timing Kit
Land Rover diesel engines. Kit contains specialised tools
required for cam belt replacement without losing the
engine camshaft and injection pump timing. Suitable for
2.5D, 200TDi and 300TDi engines fitted to Land Rover, LDV
Sherpa vans and LTI Carbodies vehicles.
Stock No Description Price
333810 Land Rover Camshaft Locking Kit 189.16
Applications: Please call our sales team or visit the Sealey
website on www.sealey.co.uk
Land Rover EDC Timing Pin
Suitable for locking the flywheel in the timed position on
Land Rover models fitted with EDC (Electronic Diesel
Control) and manual transmission.
Stock No Description Price
333814 Land Rover EDC Timing Pin 20.36
Diesel & Petrol Engine Setting/Locking Kit
Rover. Suitable for both petrol and diesel engines on a large
range of Rover models including the 2.0 litre SDI direct
injection engine. Includes petrol twin cam locking tools.
Stock No Description Price
333806 Rover Setting/Locking Kit 134.36
Applications: Please call our sales team or visit the Sealey
website on www.sealey.co.uk
Petrol Engine Locking Kit
Land Rover and Rover KV6. Set includes all engine timing
belt replacement tools for the 2.0 and 2.5 litre variants of
the KV6 quad cam engine.
Stock No Description Price
333240 Land Rover Locking Kit 335.96
Applications: Rover 825 (1996-99), 45, 75 (1999on), Land
Rover Freelander (2000on)
Petrol Engine Twin Cam Setting/Locking Kit
Designed to lock the camshafts on twin cam multi-valve
engines in order to stop them rotating out of timed
position during removal of cam belt. Colour coded locking
tools and precision machined pins. Supplied in carry
case with instructions and parts list.
Stock No Description Price
333816 Twin Cam Setting/Locking Kit 176.36
Applications: Ford, Honda, Land Rover, Rover, Mazda,
Vauxhall, Opel twin cam engines.

ENGINE SETTING & LOCKING 229
Flywheel Holding Tool CONTINUED >
Diesel Engine Setting/Locking Kit
Master service kit for a wide variety of vehicles. Includes
setting and locking tools for engine timing and fuel pump
timing. Includes dial gauge and applications/instructions
booklet.
Stock No Description Price
333818 Master Setting/Locking Kit 344.36
Setting/Locking: Audi, Citroen, Fiat, Ford, Mazda,
Peugeot, Rover, Seat, Vauxhall, Opel, Volkswagen, Volvo.
Fuel Injection Pumps: Bosch, Diesel Kiki, Nippon Denso
VE Rotary, CAV/Rotodiesel
Rover Camshaft Locking Tool
For locking camshafts on Rover Group engines. Made
from anodised aluminium.
Stock No Description Price
337154 Rover Camshaft Locking Tool 2.70
Applications: Metro 1.4 Gta, Gti, Rover 214 16 valve Si, Sli,
Gsi, Rover 414 16 valve Si, Sli, Gsi
Flywheel Positioning Tool
Locates into the teeth on the flywheel, enabling precise
positioning of the crankshaft.
Stock No Description Price
333822 Flywheel Positioning Tool 15.95
Flywheel Holding Tool
Stock No Applications Price
333832 Renault Diesel 26.00
Flywheel Holding Tool
Stock No Applications Price
337158 Citroen, Fiat, Peugeot, FSO, LDV 9.45
Flywheel Holding Tool
Stock No Applications Price
333834 Renault Petrol & Diesel 21.96
Flywheel Holding Tool
Stock No Applications Price
333836 Rover Petrol 46.36
Camshaft/Flywheel Locking/Holding Kit
Comprehensive kit for locking and holding camshafts and
flywheels on many Vauxhall, Opel, Isuzu, Rover, Citroen,
Peugeot, Saab and Volkswagen petrol and diesel
engines. Supplied in blow moulded carry case.
Stock No Description Price
337160 Camshaft/Flywheel Locking/Holding Kit 69.59
Diesel Engine Setting/Locking Kit
Economy setting and locking kit for European diesel
vehicles. Made from cropped steel stock, chemically
treated for corrosion protection.
Stock No Description Price
333820 Euro Setting/Locking Kit 36.95
Applications: Audi, Citroen, Peugeot, Volkswagen, Volvo.
Camshaft Holding & Alignment Tools
For Ford Zeta and Zetec engines. The holding tool fits
positively into the camshaft pulley spokes so that it can
hold and manipulate the cam drive pulley. The aligning
tool is used to align the two camshafts.
Stock No Description Price
337152 Camshaft Positioning Tools 16.10
All prices and descriptions correct at
time of publication and are subject to
change without notice
Flywheel Holding Tools
These tools securely lock the flywheel to the housing to
allow the crankshaft pulley retaining bolt to be
loosened/tightened.
Flywheel Holding Tool
Stock No Applications Price
333824 Citroen, Peugeot Petrol & Diesel 21.96
Flywheel Holding Tool
Stock No Applications Price
333826 Citroen, Peugeot, Rover Diesel 24.45
Flywheel Holding Tool
Stock No Applications Price
337156 Vauxhall, Opel, Isuzu 3.57
Vauxhall/Opel 1.2, 1.4, 1.6, 1.8, 2.0 OHC petrol, 1.6, 1.7 OHC
diesel Isuzu 1.5, 1.7 diesel
Flywheel Holding Tool
Stock No Applications Price
333828 Vauxhall, Opel 24.45
Vauxhall/Opel 1.8, 2.0, 2.2 EcoTec 16 valve petrol 1.6-2.0
SOHC petrol 1.6, 1.7 diesel
Flywheel Holding Tool
Stock No Applications Price
333830 Vauxhall, Opel 22.76
Vauxhall/Opel 1.4, 1.6 EcoTec 16 valve petrol 1.2-1.6 OHC
petrol
CONTINUED >
Universal Camshaft Locking Tool
Unique time-saving device for locking the position of
camshafts to retain engine timing positions. Suitable for
twin, quad and diesel camshafts. Connecting bar reach
can be adjusted from 28 mm to 92 mm, giving good
application coverage from closely positioned sprockets
on many twin cams to more widely spaced cam/injector
pump sprockets on some diesel engines. Adjusts for
sprocket diameter and tooth pitch.
Stock No Description Price
333250 Camshaft Locking Tool 75.56
Stock No 333818

230
FUEL TIMING & ADJUSTING
Camshaft Locking Tool Extension
Used in conjunction with stock number 333250, universal
camshaft locking tool, the reach on this long connecting
bar can be adjusted from 90 mm to 160 mm giving a wider
range of vehicle applications for the locking tool. Allows
use on some single cam diesel engines where cam and
fuel pump can be locked together to reduce cam belt
changing times.
Stock No Description Price
333252 Camshaft Locking Tool Extension 4.76
Diesel Pump Timing Kit
A 13 pce set of tools for timing diesel fuel injection
pumps. Kit includes Bosch adaptor for pumps fitted with
M10 service ports found on VW/Audi, Volvo, Renault and
Ford Transit. Supplied complete with stock number
333220 mini dial gauge, applications guide and operating
instructions in a foam-lined carry case.
Stock No Description Price
333842 Injection Pump Timing Kit 193.16
Applications: Bosch, Diesel Kiki, Nippon Denso VE Rotary,
CAV/Rotodiesel (top entry)
Fuel Injection Test Probe
Sealey brand. Enables in situ test of fuel injectors.
Triggers injectors with single or multiple bursts to
diagnose sticking or sluggish solenoid. Three different
pulse widths available. Lock settings for easy comparison
between injectors. Fitted with short circuit and thermal
overload protection. Suitable for 12 volt only.
Stock No Description Price
333272 Fuel Injector Test Probe 897.95
Camshaft Locking Tool
Locks single cam and twin cam V engines fast and
effectively. Also locks injection pump sprocket on diesel
engines. Compact size allow use in confined spaces. Tool
attaches to belt pulley and locks pulley to the engine
block. Supplied with two lengths of locking probe.
Stock No Description Price
333838 Camshaft Locking Tool 74.76
Piston Travel Adaptor
Suitable for use when setting fuel timing on XUD engines,
as fitted to Citroen, Rover and Peugeot vehicles, where it
is necessary to time the fuel pump relative to a known
position before TDC. Suitable for use with stock number
333220, mini dial gauge.
Stock No Description Price
333262 Piston Travel Adaptor 43.45
Tamper-Proof CO Mixture Tool
Double ended tool with 3 mm tamper-proof hex tip for
adjusting mixture on Ford CVH engines fitted to Escort,
Orion and Fiesta and Weber blade for recessed mixture
adjustment on Ford and GM engines.
Stock No Description Price
333844 Tamper-Proof Mixture Tool 10.95
Belt Tension Tester
Simple, fast and accurate assessment of cam belt
tension. Suitable for all common types of timing belt. Set
includes belt gauge, tension gauge, tension buttons and
calibration strip. Supplied in carry case.
Stock No Description Price
333840 Timing Belt Tension Tester 184.76
Mixture Key Set
Two keys, with 3 mm and 5 mm security tips to fit K
Jetronic and L Jetronic fuel injection systems. Also fits
Weber mixture adjuster.
Stock No Description Price
333846 2 pce Mixture Key Set 8.95
Stock No 333270
All prices are in pounds sterling
and exclude V.A.T.
Fuel Injection Pressure Test Kit
Sealey brand. Comprehensive test kit designed with
safety in mind for modern fuel-injected systems.
Features include
• Large high pressure gauge, reading 0-145 psi and
0-1000 kpa
• Low pressure gauge for accurate low pressure
readings
• Comprehensive set of adaptors and fittings
• Components fitted with quick coupling system and
safety valve to prevent inadvertent discharge of fuel
under pressure
• Pressure release valve fitted with long drain hose to
allow safe recovery of fuel
• Supplied in carry case
Stock No Description Price
333270 Fuel Injection Pressure Test Kit 311.96

IGNITION TIMING/FAULT READERS/TESTERS 231
Carburettor & Fuel Injection Tool Set
Sealey brand. Comprehensive 9 pce set supplied in
moulded carry case. Set contains
• Bosch-K Mixture Tool
• Stromberg Bottom Fitting Tool
• Nikki and Hitachi Tool
• Float Needle Valve Spanner
• Aisan and Mikumi Tool
• Bosch Mixture Tool (Jetronic and Motronic)
• Stromberg Dual Purpose Tool
• Tamper-Proof Mixture Tool
• Weber Tool
Stock No Description Price
333848 Carburettor Tuning Set 39.00
Injector Noid Light Set
Checks fuel injector systems quickly and efficiently.
Disconnect injector harness, plug in noid light and turn
on ignition. If the light is steady or absent, the signal from
ignition system is faulty. Fits a wide range of injector
harnesses.
Stock No Description Price
337162 6 pce Noid Light Set 12.45
Digital Timing Light
Sealey brand. Suitable for checking ignition timing on 12
volt automotive, agricultural and marine engines. Four
digit LED display reads rpm, advance dwell and voltage.
Features include 1.5 metre power supply lead, colour
coded crocodile clips, inductive pick-up and impact
resistant composite housing. Supplied complete with
comprehensive instructions.
Stock No Description Price
333850 Professional Timing Light 95.96
Haynes Fault Codes Manual
Haynes manual for the interpretation of vehicle fault codes.
Stock No Description Price
331451 Diagnostic Fault Codes Manual 15.19
Fault Code Reader
For reading the fault codes found in vehicle ECU
diagnostic systems. Supplied complete with stock
number 331451, Haynes Fault Code Manual, and stock
numbers 331454 and 331457, the adaptor leads for Ford
and GM vehicles.
Stock No Description Price
331450 Vehicle Fault Code Reader 33.10
Professional Fault Code Readers
Plugs into vehicle diagnostic socket to access onboard
computer to read codes for vehicle faults, including
intermittent faults. Codes can be interpreted using the
vehicle manual or stock number 331451, Haynes Fault
Codes Manual.
Stock No Vehicle Manufacturer Price
331470 Citroen/Peugeot 13.43
331471 Volkswagen/Audi 12.61
331472 Ford 3 Pin 14.35
331473 Ford 5 Pin 13.16
331474 Vauxhall/Opel 12.61
331475 Rover/Honda 12.61
331476 Nissan 12.61
331477 Toyota/Suzuki 12.61
Applications: Please call our sales team or visit the
Draper website on www.draper.co.uk
Towing Socket Tester
Draper brand. For testing 12 volt seven pin N type plug
towing sockets. Six LED lights on module indicate wiring
circuit faults.
Stock No Description Price
337166 12 Volt Towing Socket Tester 59.88
Key Fob & Remote Control Tester
Xenon Timing Light
Draper brand. Suitable for checking ignition timing on 12
volt automotive, agricultural and marine engines.
Features include colour coded crocodile clips, xenon
bulb, inductive pick-up and impact resistant housing.
Stock No Description Price
331416 Pistol Grip Timing Light 31.86
Stock No 337166
Diagnostic Adaptor Leads
Used in conjunction with stock number 331450, fault code
reader, to access fault codes in vehicle ECU diagnostic
systems.
Stock No Vehicle Manufacturer Price
331452 Audi 4.04
331453 Citroen/Peugeot 4.04
331454 Ford 5 Pin 4.04
331455 Nissan 4.04
331456 Volkswagen 4.04
331457 GM 16 Pin 4.04
Draper brand. Checks if key fobs and remote control units
are functioning. Suitable for infra red and 418/433 MHz
radio frequencies. Fitted with magnetic strip for attaching
to tool boxes or vehicles when range testing.
Stock No Description Price
337168 Remote Control Tester 21.92
Lambda Sensor Tester
Draper brand. For checking lambda or oxygen sensor
switch operation on fuel injection management systems.
Suitable for testing Zinconia Lambda sensors only. LED
indicator for test results and battery indicator for low
voltage. Supplied complete with heavy duty insulated
contact clips and instruction leaflet.
Stock No Description Price
337170 Oxygen Sensor Tester 13.92

232
TESTERS/AUTOMOTIVE ANALYSERS
HT System Tester
Draper brand. Four testers suitable for quick checking of
HT systems. Indicates if voltage is present in HT leads
and helps identify whether problem is with HT leads or LT
parts. Can be used on all cylinder combinations.
Stock No Description Price
337174 4 pce HT System Tester 7.97
Digital Automotive Analyser CONTINUED >
• Low battery indicator
• LCD screen with backlight
• Impact resistant housing
• Tilting stand
• Recessed input terminals
• Four test leads (probes and crocodile clips)
• Instruction manual
• Supplied in soft storage case
Stock No Description Price
337178 Digital Automotive Analyser 29.93
Specification: Visit the Draper website on
www.draper.co.uk
Digital Autoranging Automotive Analyser CONTINUED >
• Negative polarity indicator
• Low battery indicator
• Overload protection
• Heavy duty inductive pick-up
• Large LCD screen with backlight
• Auto power off
• Tilting stand
• Recessed input terminals
• Four test leads (probes and crocodile clips)
• Instruction manual
• Supplied in soft storage case
Stock No Description Price
337180 Digital Automotive Analyser 57.39
Specification: Visit the Draper website on
www.draper.co.uk
Auto Electricians Circuit Tester
Teng Tools. Brass 6-24 volt DC tester with steel probe and
screw-on cover. Supplied complete with 830 mm cable
with crocodile clip.
Stock No Description Price
333010 6-24 volt DC Circuit Tester 4.48
Automotive Multi-Tester
Draper brand. Checks 12 volt vehicle circuits, tests
vehicle batteries and does spark plug ignition voltage test.
Stock No Description Price
337176 Automotive Multi-Tester 8.31
Digital Autoranging Automotive Analyser
Draper brand. Digital automotive analyser with inductive
pick up and autoranging facility. Suitable for auto technician
or home mechanic. Measures rpm and dwell angle on
2, 3, 4, 5,m 6 and 8 cylinder engines. Features include
• Measures AC/DC volts and AC/DC amps
• Measures resistance
• Measures dwell angle
• Takes tachometer readings
• Measures duty cycle and frequency
• Diode test facility
• Audible continuity tester
• Temperature sensor (-20 to 750 °C)
• Low battery indicator
• Heavy duty inductive pick up
• LCD screen with backlight
• Impact resistant housing
• Tilting stand
• Recessed input terminals
• Four test leads (probes and crocodile clips)
• Instruction manual
Stock No Description Price
337182 Digital Automotive Analyser 56.01
Specification: Visit the Draper website on
www.draper.co.uk
Digital Autoranging Automotive Analyser
Draper brand. Digital automotive analyser with interface
cable for use with a PC. Measures rpm and dwell angle on
1, 2, 3, 4, 5, 6, 8, 10 and 12 cylinder engines. Features include
• Software supplied on CD-ROM
• Measures AC/DC volts and AC/DC amps
• Measures resistance
• Measures dwell angle
• Takes tachometer readings
• Measures duty cycle, pulse width and frequency
• Diode test facility
• Audible continuity tester
• Temperature sensor (-20 to 750 °C)
• Negative polarity indicator
• Low battery indicator
• Overload protection
• Heavy duty inductive pick-up
• Large LCD screen with backlight
• Auto power off
• Tilting stand
• Recessed input terminals
• Four test leads (probes and crocodile clips)
• Instruction manual
• Supplied in soft storage case
Stock No Description Price
337183 Digital Automotive Analyser 103.67
Specification: Visit the Draper website on
www.draper.co.uk
Digital Automotive Analyser
Draper brand. Suitable for auto technician or home
mechanic. Measures RPM and dwell angle on 3, 4, 5, 6
and 8 cylinder engines (and indirectly on 1 and 2 cylinder
engines). Features include
• Measures DC volts and DC amps
• Measures resistance
• Measures dwell angle
• Takes tachometer readings
• Diode test facility
• Audible continuity tester
CONTINUED >
Digital Autoranging Automotive Analyser
Draper brand. Digital automotive analyser with inductive
pick up and autoranging facility. Suitable for auto
technician or home mechanic. Measures rpm and dwell
angle 4, 5, 6 and 8 cylinder engines. Features include
• Measures AC/DC volts and AC/DC amps
• Measures resistance
• Measures dwell angle
• Takes tachometer readings
• Measures duty cycle and frequency
• Diode test facility
• Audible continuity tester
• Temperature sensor (-20 to 750 °C)
• Negative polarity indicator
CONTINUED >
Automotive Tachometer
Draper brand. Measures two stroke, four stroke and distributorless
ignition systems (DIS) by inductive pick up.
Features include
• Operates on 1-8 cylinder engines
• Large LCD screen
• Data hold facility
• Low battery indicator
• Auto power off
Stock No Description Price
337184 Automotive Tachometer 25.63
RPM4 600-2000 (x10rpm)
300-3200 (x10rpm)

OIL FILTER TOOLS 233
Oil Filter Pliers
Sealey brand. Slip joint pliers with round, large capacity
jaws. PVC dipped handles.
Stock No Capacity Price
332038 45-89 mm 11.16
332040 54-108 mm 12.76
Oil Filter Chain Wrench
Draper brand. Heavy duty chain. Tightening nut can be
operated with a 1 ⁄2" ratchet handle or a 24 mm spanner.
Stock No Capacity Price
337192 130 mm 3.62
Notch Cap Oil Filter Wrenches
Sykes Pickavant. Caps with 3 ⁄8" drive, for the safe removal
of Purflux notched oil filters. Applications include Citroen,
Peugeot, Renault, Honda and Rover.
3 ⁄8" Drive Oil Filter Wrenches. For Purflux oil
filters
Stock No Diameter Notches Price
339141 66 mm 6 10.46
339142 76 mm 6 10.46
339143 86 mm 9 12.55
339144 96 mm 9 12.55
3 ⁄8" Drive Oil Filter Wrench Set
Stock No Contents Range Price
339140 4 pce 66-96 mm 39.98
Self Grip Oil Filter Pliers
Draper brand. Adjustable opening with quick release
lever.
Stock No Capacity Price
337186 53-118 mm 13.14
Oil Filter Strap Wrench
Draper brand. With 25 mm wide nylon webbing strap. Can
be operated by a 1 ⁄2" ratchet handle or a 21 mm spanner.
Stock No Capacity Price
331430 120 mm 4.35
Oil Filter Wrenches
Sealey brand. Automatically clamps oil filter when
wrench is turned. Handle pivots to give clearance when
working in confined spaces.
Stock No Capacity Price
332005 73-82 mm 9.16
332000 89-98 mm 9.16
Oil Filter Band Wrenches
Non-stretch steel band, adjustable with screw
mechanism. Removes filters with minimal risk of damage.
Sealey Oil Filter Band Wrenches
Stock No Capacity Price
332035 65-110 mm 15.96
332036 112-155 mm 15.96
Sykes Pickavant Oil Filter Band Wrenches
Stock No Capacity Price
330110 65-100 mm 18.00
330120 110-155 mm 19.60
Oil Filter Cap Wrench Set
Sealey brand. Set of 3 ⁄8" drive fluted cap wrenches.
Designed to grip like sockets, they minimise the risk of
crushing the oil filter. Made from steel. Maximum torque
85 ft lbs.
Stock No Contents Range Price
333852 15 pce 65-100 mm 51.16
Specifications: Visit the Sealey website on
www.sealey.co.uk
Oil Filter Strap Wrench
Draper brand. With 38 mm wide, heavy duty nylon
webbing strap. Can be operated by a 3 ⁄8" or 1 ⁄2" ratchet
handle
Stock No Capacity Price
337190 280 mm 9.17
Three Leg Oil Filter Wrench
Draper brand. For use on car or commercial vehicle oil
filters. As wrench is tightened, the serrated legs clamp
around the filter for easy removal. Can be operated by a
3
⁄8" ratchet handle or a 19 mm spanner.
Stock No Capacity Price
337194 65-120 mm 12.27
Portable Oil Extraction Unit
Lightweight, 12 volt power unit for extracting oil from
engines without having to remove the drain plug. Suitable
for motor vehicle, motorcycle and marine engines.
Supplied complete with flexible dipstick hose with
additional 1.5 metres of hose for oil extraction. Supplied
complete with 3 metres of electric cable with cigarette
lighter plug. A second length of cable with crocodile clips
for attachment to a 12 volt battery is also supplied.
Stock No Voltage Reservoir Capacity Price
337196 12 volts DC 5.2 litres 44.00
Oil Extraction Rate 1 Litre/Min (approx)
Stock No 333852

234
OIL FILTER & EXHAUST TOOLS
Pneumatic Oil Extraction / Brake Bleeding Kit
Draper brand. Extracts engine oil from cars, vans, trucks,
motor bikes, marine engines and generators without
removing the drain plug. Also allows fluid to be drawn
from the brake bleed nipple enabling either bleeding or
full replacement of fluid in system. One person operation,
using standard workshop air supply. Supplied complete
with 1.4 metres of anti-kink hose, 4 siphon hoses and
brake bleeding hose with connector.
Stock No Air Pressure Air Consumption Price
331815 70 - 110 psi 6 -7 cfm 102.14
Reservoir Capacity 10 Litres
Oil Extraction Rate 2.5 Litres/Min
3 ⁄8" Drive Drain Plug Keys
Draper brand. Made from hardened and tempered
chrome vanadium steel.
3 ⁄8" Drive Drain Plug Keys
Stock No Size Price
383831 8 mm/ 5 ⁄16" Hexagon 2.52
383832 10 mm Hexagon 2.52
383833 12 mm Hexagon 2.52
383834 14 mm Hexagon 2.52
383835 17 mm Hexagon 2.52
383830 8 mm Square 2.52
383840 11 mm Square 2.52
383836 3
⁄8" Square 2.52
3 ⁄8" Drive Drain Plug Key Set. Supplied on a
socket rail.
Stock No Contents Range Price
383842 9 pce 8 - 17 mm Hexagon 18.77
8 - 11 mm Square
5 Hexagon Bit Sockets 8, 10, 12, 14, 17 mm
3 Square Bit Sockets 8, 11 mm, 3 ⁄8"
1 Tommy Bar
Exhaust Clamp Removal Plates
Sykes Pickavant. For safe and quick removal and
installation of exhaust retaining clamps on
Volkswagen/Audi vehicles.
Stock No Description Price
330100 Exhaust Clamp Removal Plates 10.60
Exhaust Hanger Pullers
Sykes Pickavant. Pair of exhaust hanger stretchers, one
with a short hook and the other with a long hook for
refitting exhaust rubber mountings.
Stock No Description Price
339155 Exhaust Hanger Pullers (2) 12.55
Telescopic Oil Drainer
Draper brand. For collecting oil draining from the sump
plug. The oil is collected by a 410 mm diameter filtered
funnel, which is connected to the reservoir by a
telescopic down pipe. Fitted with swivel castors for ease
of movement.
Stock No Height Capacity Price
337198 760-1600 mm 36 litres 82.94
1 ⁄2" Drive Drain Plug Key
Draper brand. Made from hardened and tempered
chrome molybdenum steel. For transmissions/gearboxes
on VW/Audi vehicles.
Stock No Description Price
123210 Tamperproof Spline Key 6.21
Exhaust Hanger Pullers
Sealey brand. For fast removal and installation of rubber
anti-vibration mountings found on modern exhaust
systems.
Stock No Description Price
333854 Exhaust Hanger Puller 5.96
Oil Drain Pan
Manufactured from high density polyethylene. Resistant
to most chemicals and solvents. Anti-splash lip, large
handles and enclosed spout helps reduce spillages.
Stock No Diameter Price
337200 450 mm 14.69
Drain Plug Key Set
Draper brand. Double ended drain plug keys with 19 mm
hex body. Can be turned with a tommy bar or a 19 mm
deep socket. Supplied in a plastic case.
Stock No Contents Range Price
383844 5 pce 8 - 17 mm Hexagon 11.60
8 - 13 mm Square
Sizes are 8 x 9, 10 x 12, 14 x 17 mm Hexagon
3
⁄8" x 11, 8 x 13 mm Square
Exhaust Hanger Removal Pliers
Enables fast, one-handed removal of exhaust brackets
from rubber hangers. Suitable for most cars and light
commercial vehicles.
Stock No Length Price
333856 270 mm 20.76
Drain Plug Wrench
Wrench has nine different tapered sizes for the removal
of female drain plugs fitted in many automotive
applications.
Stock No Diameter Price
331370 210 mm 4.91
Stock No 331815

EXHAUST, BOOT CLAMP & BALL JOINT TOOLS 235
Exhaust Pipe Cutters
Cuts exhaust pipe and other thin walled steel and copper
tubing. Sixteen cutting blades ensure even cut.
Stock No Capacity Price
335010 20-75 mm 24.36
CVJ Boot Clamp Pliers
Steel jaws with formed handles. Suitable for all earless
boot clamps.
Stock No Length Price
333864 235 mm 11.96
Ball Joint Separators
Fork type ball joint separators. Forged from carbon steel
with plated finish. Jaw width 19 mm. Throat depth 70 mm.
Stock No Length Price
331070 200 mm 8.43
331060 400 mm 10.72
Exhaust Pipe Cutter
Cuts thin walled pipe up to 2.5 mm thick. Ideal for cutting
stainless steel exhaust pipes, especially where access is
limited. Replacement cutting chains are available.
Stock No Capacity Max. Thickness Price
333858 20-75 mm 2.5 mm 47.96
333860 Replacement Chain 28.76
CVJ Boot Clamp Installer & Cutter
Quality made tool that tensions, secures and cuts CVJ
boot banding material. Fitted with large, comfortable
handle.
Stock No Max. Band Width Price
335030 10 mm 11.26
Ball Joint Separator Kit
Fork type ball joint separators. Three steel forks, two
interchangeable shafts. One shaft is for use with a ball
pein hammer, the other shaft fits into an air hammer.
Stock No Description Price
333866 5pce Ball Joint Separator Kit 25.56
Set contains
Jaw Width
Tie Rod Spreader 18 mm
Ball Joint Separator 24 mm
Pitman Arm Wedge 29 mm
CVJ Boot Installation Tool
Composite cone with steel core. Enables installation of
CVJ boot without splitting drive train.
Stock No Length Price
335020 405 mm 12.28
CVJ Boot Steel Banding
Suitable for use with CVJ boot clamp installer.
Stock No Description Price
335040 2pce Steel Banding 2.78
Ball Joint Separator
Scissor type ball joint separator. Forged steel body with
thrust bolt. Suitable for cars and light vans.
Stock No Jaw Width Jaw Capacity Price
333868 19 mm 38 mm 13.56
Bootslider CVJ Boot Tool
Works from standard workshop air supply, this innovative
tool saves time, money and frustration. Installs flexible
steering and CVJ boots without removing axle from the
vehicle or the CV joint from the axle. No effort and no
mess. Prevents damage to CV joint. Composite body with
simple control valve. Suitable for boot diameters 20-95 mm.
Stock No Max. Air Pressure Air Inlet Price
333862 125 psi 1
⁄4" BSP 99.00
Wheel Balance Weight Pliers
For fitting, removing and cutting vehicle wheel weights.
Stock No Length Price
337202 250 mm 10.35
Ball Joint Separator
Adjustable, scissor type ball joint separator. Forged steel
body with chemically blacked adjustment and thrust bolts.
Suitable for track rod ends, anti-roll bar mountings and ball
joints.
Stock No Jaw Width Jaw Capacity Price
333870 18-22 mm 45 mm 19.16
Stock No 333862

236
BALL JOINT & STRUT NUT TOOLS/
COIL SPRING COMPRESSORS
HGV Ball Joint Separator
Sykes Pickavant. Large, scissor type ball joint separator.
Strengthened fork and lever allows greater force to be
applied.
Stock No Jaw Width Jaw Capacity Price
339160 36 mm 70 mm 110.00
Ball Joint Socket
Suitable for Citroen and Peugeot lower ball joints. Socket
has 50 mm diameter ring with drive pegs that locate into
slats cut into the ball joint flange.
Stock No Size Drive Price
335045 50 mm ø 35 mm Hex 8.62
Strut Nut Tool Kit
For the removal and replacement of strut units clamped in
the hub, without damaging the hub.
Stock No Description Price
335060 2pce Strut Nut Tool Kit 7.48
Hydraulic Ball Joint Separator
Sykes Pickavant. HGV, scissor type ball joint separator.
Uses the hydraulic power of the 1500 series hydraulic ram.
Provides up to 8 tonnes of hydraulic force.
Stock No Jaw Width Jaw Capacity Price
339165 36 mm 70 mm 180.00
Shock Absorber Tool Kit
Universal turnbuckle set for shock absorbers top fixing.
Set includes turnbuckles, sockets, oblong bits, D bits, hex
bits, flat bits and spline bits.
Stock No Description Price
335050 39pce Shock Absorber Tool Kit 200.83
Drive Shaft Circlip Tool
For the removal and installation of the circlip found on the
drive shaft on four wheel drive Vauxhall and Opel vehicles.
Stock No Description Price
335065 GM Drive Shaft Circlip Tool 8.78
Ball Joint Puller
Forged steel body with hardened thrust bolt. Suitable for
use on most cars and some light commercial vehicles.
Stock No Jaw Width Jaw Capacity Price
331080 19 mm 50 mm 9.06
Ball Joint Puller
Sykes Pickavant. Forged steel body with hardened thrust
bolt. Suitable for use on light commercial vehicles.
Stock No Jaw Width Jaw Capacity Price
339170 25 mm 55 mm 31.37
Strut Nut Tool Kit
For the removal and installation of shock absorber
retaining nuts on most Volkswagen and Audi vehicles.
Uses 22 mm socket or spanner.
Stock No Description Price
337204 4pce Strut Nut Tool Kit 13.85
Contents: No.1 10.5 mm, No.2 12.5 mm, No.3 14.5 mm,
No.4 14.5 mm
Adjustable Wrench
For use with 3 ⁄8" drive swivel handle. Ideal for track rod
ends.
Stock No Capacity Price
335070 32 mm 13.58
Coil Spring Compressor Set
Wrap over claws for extra safety. Lead screws
manufactured from hardened and tempered carbon steel.
Claw design makes them suitable for use where space
under wheel arch is limited. Maximum opening 220 mm
1
⁄2" square drive.
Stock No Description Price
337206 2pce Coil Spring Compressor Set 19.31
Trade Counter open
8.00 am - 5.30 pm Monday to Friday
and 8.30 am - 1.00 pm Saturday
Strut Nut Socket
For the removal and installation of top shock absorber
retaining nuts found on Volkswagen and Audi front wheel
drive vehicles. Use with a 22 mm spanner.
Stock No Description Price
335055 Strut Nut Socket 5.78
Stock No 339165

COIL SPRING COMPRESSORS/HUB PULLERS 237
Coil Spring Compressor Set
Cast steel claws with safety hooks to prevent accidental
release. Lead screws manufactured from hardened and
tempered carbon steel. Maximum opening 225 mm.
1
⁄2" square drive.
Stock No Description Price
337208 3pce Coil Spring Compressor Set 36.44
Optional Yokes
Sealey brand. Pairs of replacement yokes, suitable for
stock numbers 333280 and 333281, the professional coil
spring compressors.
Stock No Size/Suitability Price
333288 80-120 mm Diameter 55.00
333282 80-165 mm Diameter 46.00
333283 155-195 mm Diameter 52.00
333284 180-235 mm Diameter 67.00
333286 80-150 mm for Conical Springs 89.00
333285 Citroen/Peugeot Break Rear Axle 107.00
333287 BMW E39-46 115.00
Steering Wheel Puller
For use with Vauxhall/Opel vehicles, including those fitted
with airbags. Use with a 22 mm socket or spanner.
Stock No Description Price
335075 GM Steering Wheel Puller 15.90
Hub Puller
For use on four stud wheels. Plated ductile body casting
with hardened steel thrust bolt. Bolt centres 100-115 mm.
Stock No Description Price
331120 Hub Puller 6.98
Coil Spring Compressor
Sealey brand. Professional coil spring compressor. Safety
yokes carefully shaped to prevent coil spring from bowing.
Supplied with two pairs of standard yokes, stock number
333282 80-165 mm diameter and stock number
333283 155-195 mm diameter. Suitable for use with air
impact wrenches. Maximum jaw loading 1,100 kg
(safety factor 4X)
Stock No Description Price
333280 Coil Spring Compressor 1,100 kg 383.96
Hydraulic Coil Spring Compressor
Sealey brand. Four tonne hydraulic hand pump unit
powers ram and yoke assembly. Plastic covered safety
yokes, designed to prevent coil spring from bowing or
slipping. Supplied with two pairs of standard yokes, stock
number 333291 78-135 mm and stock number
333292 105-185 mm.
Stock No Description Price
333290 Hydraulic Coil Spring Compressor 199.96
Minimum Extension 410 mm
Maximum Extension 620 mm
Piston Travel 210 mm
Universal Hub Puller
For use with four or five stud wheels. Chromed steel body
with hardened steel thrust bolt.
Stock No Description Price
332110 Universal Hub Puller 33.56
Coil Spring Compressor
Sealey brand. Professional coil spring compressor. Safety
yokes carefully shaped to prevent coil spring from bowing.
Supplied with two pairs of standard yokes, stock number
333282 80-165 mm diameter and stock number
333283 155-195 mm diameter. Suitable for use with air
impact wrenches. Maximum jaw loading 2,250 kg
(safety factor 4X)
Stock No Description Price
333281 Coil Spring Compressor 2,250 kg 423.96
Optional Yokes
Sealey brand. Pairs of replacement yokes, suitable for
stock number 333290, the hydraulic coil spring
compressor.
Stock No Size Price
333291 78-135 mm Diameter 124.95
333292 105-185 mm Diameter 124.95
Hydraulic Hub Puller
Sealey brand. For use with four or five stud wheels. Puller
yoke made from chrome plated S45C steel. Hydraulic ram
provides sufficient power to extract the most stubborn
hubs.
Stock No Description Price
333874 Hydraulic Hub Puller 91.96
Phone Lines open
7.30 am - 5.30 pm Monday to Friday
and 8.30 am - 1.00 pm Saturday
Stock No 333291

238
PULLERS
Hydraulic Hub Puller
Sykes Pickavant. For use with three, four, five and six
stud wheels. Uses the hydraulic power of the 1500 series
ram. Provides up to 8 tonnes of hydraulic force.
Stock No Description Price
330350 Hydraulic Hub Puller 192.00
Can be used with the following thread forms:
Studs M12 x 1.25, M12 x 1.5, M14 x 1.5
Extended Nuts M12 x 1.25, M12 x 1.5
Hub Separator
Sealey brand. 5 mm steel plate body with smooth Acme
threads. Uses bolts to attach hubs and struts. Suitable for
most popular front wheel drive vehicles. Supplied in steel
case.
Stock No Description Price
333876 Universal Hub Separator 126.00
Applications: Visit the Sealey website on
www.sealey.co.uk
Harmonic Balancer Puller Set
Sealey brand. Designed for pulling harmonic balancers,
but also suitable for timing gears, flywheels and pulleys
with bolt circle diameters from 38-117 mm. Supplied in
tough storage tray.
Stock No Description Price
333352 Harmonic Balancer Puller Set 24.45
1 Yoke, Thrust Bolt, Adaptor
3 Screws 3"x 3 ⁄8"x16tpi
3 Screws 3"x 3 ⁄8"x24tpi
Slide Hammer Assembly
Sykes Pickavant. Heavy duty slide hammer assembly used
with stock number 330350 hub puller in place of the
hydraulic ram. Complete with threaded adaptor.
Stock No Hammer Weight Price
330351 4.1 kg 118.80
Flywheel Puller Set
Suitable for all cars fitted with Verto and Diaphragm
clutches.
Stock No Description Price
335080 Flywheel Puller Set 22.94
Combined Puller Set
Sealey brand. Combination set consisting of stock
numbers 333350 and 333352. Supplied in tough storage
tray.
Stock No Description Price
333354 18pce Puller Set 35.96
Hub Puller c/w Slide Hammer
Sykes Pickavant. For use with four or five stud wheels.
Supplied with light duty slide hammer.
Stock No Hub Spread Hammer Weight Price
330352 52-74 mm 1.6 kg 90.64
Steering Wheel Puller Set
Sealey brand. Fits most Vauxhall, Opel, Ford and Chrysler
vehicles. Suitable also as two-way or three-way puller
for flywheels and pulleys. Supplied in a tough storage
tray.
Stock No Description Price
333350 Steering Wheel Puller Set 14.95
1 Yoke, Thrust Bolt, Adaptor
2 Screws 3"x 5 ⁄16"x24tpi
2 Screws 3"x 3 ⁄8"x16tpi
2 Screws 3 1 ⁄2"x 5 ⁄16"x18tpi
Battery Terminal Pullers
Manufactured in Germany by Baldur Pulling Tools. Two
legged mini pullers for removing battery terminals and
small gears, pulleys and bearings. The legs grip
automatically. Capacity 0.5 tonnes.
Stock No Max. Spread Reach Price
334000 60 mm 40 mm 16.59
334010 60 mm 60 mm 16.72
334015 70 mm 80 mm 22.41
Stock No 333354
Battery Terminal Pullers
Manufactured in Germany by Baldur Pulling Tools. Three
legged mini pullers for removing battery terminals and
small gears, pulleys and bearings. The legs grip
automatically. Capacity 0.75 tonnes.
Stock No Max. Spread Reach Price
334020 60 mm 40 mm 21.68
334030 60 mm 60 mm 22.13
334035 70 mm 80 mm 30.49

PULLERS/BEARING SEPARATORS 239
Micro Bearing Puller
Three legged micro pullers for removing small bearings on
alternators, power tools, generators, pumps and domestic
appliances. Self centering. Capacity 1 tonne.
Stock No Spread Reach Price
335085 19-45 mm 73 mm 45.73
Hydraulic Puller Kit
Draper brand. Two or three leg operation. Legs have
three bolt holes for long, medium or short reach. Ten
tonne hydraulic ram easily removes bearings and gears.
Forged steel yoke and legs. Supplied in blow moulded
carrying case.
Stock No Max. Spread Reach Price
331320 230 mm 170 mm 86.88
1 Hydraulic Ram
1 Twin/Triple Yoke
3 Puller Legs
6 Nuts, Bolts, Washers
3 Pairs Link Plates
1 Nose Adaptor
Bearing Separators
Sealey brand. Forged steel jaws.
Stock No Range Price
333880 30-55 mm 23.16
333882 70-90 mm 27.96
333884 75-105 mm 35.96
333886 120-150 mm 100.76
Long Reach Micro Bearing Puller
Two legged micro pullers for long reach pulling jobs. The
legs grip automatically. Self centering. Manufactured from
drop forged alloy steel.
Stock No Spread Reach Price
335090 10-50 mm 300 mm 35.78
Twin Leg Reversible Pullers
Draper brand. Reversible legs for internal and external
use. Legs have two bolt holes for long and short reach.
Made from carbon steel.
Stock No Max. Spread Reach Price
331275 75 mm 65 mm 11.22
331280 110 mm 102 mm 13.83
331285 160 mm 165 mm 23.36
Hydraulic Puller & Separator Kit
Sealey brand. Two or three leg operation. Three sets of
legs for long, medium and short reach. Bearing separator,
rods and beam. Ten tonne hydraulic ram easily removes
bearings and gears. Forged steel yoke, beam and legs.
Supplied in blow moulded carrying case.
Stock No Max. Spread Reach Price
333878 200 mm 200 mm 223.96
1 Hydraulic Ram 1 Bearing Separator (75-105 mm)
1 Twin Puller Yoke 4 200mm Extension Rods
1 Triple Puller Yoke 1 50 mm Ram Extension
3 100 mm Puller Legs 1 100 mm Ram Extension
3 150 mm Puller Legs 3 Nuts, Bolts, Washers
3 200 mm Puller Legs 1 Nose Adaptor
1 Cross Beam 1 Ram Repair Kit
Bearing Separator Set
Sealey brand. Mechanical puller set, suitable for
engineering, automotive, marine and agricultural
applications. Supplied in carry case.
Stock No Range Price
333888 30-90 mm 87.96
1 Thrust Bolt 180 mm
1 Cross Beam
4 105 mm Extension Rods
4 130 mm Extension Rods
1 Separator 30-55 mm
1 Separator 70-90 mm
Triple Leg Reversible Pullers
Draper brand. Reversible legs for internal and external
use. Legs have two bolt holes for long and short reach.
Made from carbon steel.
Stock No Max. Spread Reach Price
331288 75 mm 65 mm 15.74
331290 110 mm 102 mm 19.98
331300 160 mm 165 mm 29.74
Stock No 333888
Hydraulic Bearing Separator Set
Sealey brand. Cast cross beam and forged steel
separator. Ten tonne hydraulic ram easily removes
bearings. Supplied in steel case.
Stock No Range Price
333890 75-105 mm 107.96
1 Hydraulic Ram
1 Cross Beam
4 200 mm Extension Rods
1 Separator 75-105 mm
1 Nose Adaptor

240
PULLERS/BEARING SEPARATORS
Hydraulic Bearing Separator Set
Sealey brand. Cast cross beam and forged steel
separator. Suitable for commercial vehicle bearings,
120-150 mm. Powerful ten tonne hydraulic ram. Supplied
in steel case.
Stock No Range Price
333892 120-150 mm 159.96
1 Hydraulic Ram
1 Cross Beam
4 200 mm Extension Rods
1 Separator 120 - 150 mm
1 50 mm Ram Extension
1 100 mm Ram Extension
1 Plug
Hydraulic Ram
Baldur grease-hydraulic pressure spindle, designed for
controlled and safe pulling work. Replaces thrust spindle
in larger Baldur pullers.
Stock No Length Capacity Price
334098 350 mm 12 Tonnes 210.93
Three Leg Hydraulic Pullers CONTINUED >
Standard Legs
Stock No Max. Spread Reach Ram Extension Price
339215 100 mm 100 mm 50 mm 110.00
339220 150 mm 150 mm 100 mm 113.60
339225 150 mm 250 mm 150 mm 131.20
339230 200 mm 200 mm 150 mm 131.20
339235 250 mm 250 mm 150 mm 136.00
Thin Feet. Slim feet aid access where clearance
behind gear or bearing is limited.
Stock No Max. Spread Reach Ram Extension Price
339240 150 mm 150 mm 50 mm 184.80
339245 150 mm 225 mm 100 mm 189.20
Two Leg Pullers
Manufactured in Germany by Baldur Pulling Tools.
Reliable extra-strong model for the removal of pulleys,
bearings, flywheels and gears. Hooks grip automatically.
Legs have two bolt holes to adjust clamping reach.
Spindle may be exchanged for hydraulic ram in three
largest models.
Stock No Max. Spread Reach Capacity Price
334058 90 mm 100 mm 1 Tonne 29.43
334060 130 mm 140 mm 2 Tonnes 38.97
334070 200 mm 210 mm 5 Tonnes 68.84
334072 250 mm 260 mm 8 Tonnes 104.94
334074 280 mm 390 mm 8 Tonnes 128.47
334076 420 mm 480 mm 8 Tonnes 147.23
Triple Leg Pullers
Manufactured in Germany by Baldur Pulling Tools.
Reliable extra-strong model for the removal of pulleys,
bearings, flywheels and gears. Hooks grip automatically.
Legs have two bolt holes to adjust clamping reach.
Spindle may be exchanged for hydraulic ram in three
largest models.
Stock No Max. Spread Reach Capacity Price
334078 90 mm 100 mm 2 Tonnes 39.68
334080 130 mm 140 mm 3 Tonnes 50.08
334090 200 mm 210 mm 8 Tonnes 86.35
334092 250 mm 260 mm 12 Tonnes 133.78
334094 280 mm 390 mm 12 Tonnes 168.73
334096 420 mm 480 mm 12 Tonnes 198.02
Two Leg Hydraulic Pullers
Manufactured in Cannock, Britain by Sykes Pickavant, a
company renowned for providing high quality, innovative
pullers and puller kits. Powered by the now famous 1500
series hydraulic ram. The spring loaded plunger provides
direct, non-twisting application of thrust, offering greater
efficiency and security. Maximum thrust 8 tonnes. Each
puller is supplied complete with a ram extension and
nose piece.
Standard Legs
Stock No Max. Spread Reach Ram Extension Price
339175 100 mm 100 mm 50 mm 92.00
339180 150 mm 150 mm 100 mm 96.80
339185 150 mm 250 mm 150 mm 110.00
339190 200 mm 200 mm 150 mm 110.00
339195 250 mm 250 mm 150 mm 113.60
Thin Feet. Slim feet aid access where clearance
behind gear or bearing is limited.
Stock No Max. Spread Reach Ram Extension Price
339200 150 mm 150 mm 50 mm 124.00
339205 150 mm 225 mm 150 mm 136.00
339210 225 mm 225 mm 150 mm 158.40
Three Leg Hydraulic Pullers
Manufactured in Cannock, Britain by Sykes Pickavant, a
company renowned for providing high quality, innovative
pullers and puller kits. Powered by the now famous 1500
series hydraulic ram. The spring loaded plunger provides
direct, non-twisting application of thrust, offering greater
efficiency and security. Maximum thrust 8 tonnes. Each
puller is supplied complete with a ram extension and
nose piece.
CONTINUED >
Hydraulic Puller Kits
Sykes Pickavant. Powered by the 1500 series hydraulic
ram. Maximum thrust 8 tonnes.
153405 Puller Kit
Stock No Max. Spread Reach Price
339250 100 mm 100 mm 126.40
1 Hydraulic Ram
1 Nose Piece
1 Ram Extension 50 mm
1 Double Yoke
1 Triple Yoke
3 100 mm Legs
155000 Puller Kit
Stock No Max. Spread Reach Price
339255 150 mm 150 mm 176.00
1 Hydraulic Ram
1 Nose Piece
1 Ram Extension 50 mm
1 Double Yoke
1 Triple Yoke
3 100 mm Legs
3 150 mm Legs
1 Metal Case
155008 Puller Kit
Stock No Max. Spread Reach Price
339260 200 mm 200 mm 222.80
1 Hydraulic Ram
1 Nose Piece
2 Ram Extensions 50, 100 mm
1 Double Yoke
1 Triple Yoke
3 100 mm Legs
3 150 mm Legs
3 200 mm Legs
1 Metal Case
155100 Puller Kit
Stock No Max. Spread Reach Price
339265 250 mm 250 mm 340.60
1 Hydraulic Ram
1 Nose Piece
3 Ram Extensions 50, 100, 150 mm
1 Double Yoke
1 Triple Yoke
3 100 mm Legs
3 150 mm Legs
3 175 mm Legs
3 200 mm Legs
3 250 mm Legs
1 Metal Case
CONTINUED >

PULLERS/BEARING SEPARATORS 241
Hydraulic Puller Kits CONTINUED >
155105 Puller Kit. Supplied on metal storage panel.
Stock No Max. Spread Reach Price
339270 250 mm 250 mm 383.20
1 Hydraulic Ram
1 Nose Piece
3 Ram Extensions 50, 100, 150 mm
1 Double Yoke
1 Triple Yoke
3 100 mm Legs
3 150 mm Legs
3 200 mm Legs
3 250 mm Legs
1 Metal Storage Panel
1 Hook Kit
155105 Puller Kit. Supplied on metal storage panel.
Stock No Max. Spread Reach Price
339275 225 mm 225 mm 420.00
1 Force Screw
1 Hydraulic Ram
1 Nose Piece
3 Ram Extensions 50, 100, 150 mm
1 Double Yoke
1 Triple Yoke
3 100 mm Legs
3 150 mm Legs
3 200 mm Legs
3 250 mm Legs
1 Metal Box
186505 Thin Feet Puller Kit. Supplied on metal
storage panel
Stock No Max. Spread Reach Price
339280 225 mm 225 mm 468.00
1 Force Screw
1 Hydraulic Ram
1 Nose Piece
2 Ram Extensions 50, 150 mm
3 Double Beams
1 Triple Beam
3 75mm Legs
3 225 mm Legs
1 Metal Storage Panel
1 Hook Kit
Bearing Separators
Sykes Pickavant. Separators have tapered edge for
insertion behind close fitting bearings and gears.
Stock No Range Price
339285 55 mm 33.40
339290 20-105 mm 72.00
339295 35-140 mm 127.60
339300 50-175 mm 206.80
Stock No. 339305
Hydraulic Puller & Separator Kits
Sykes Pickavant. Powered by 1500 series hydraulic ram.
Maximum thrust 8 tonnes.
155200 Puller and Separator Kit
Stock No Puller Spread Puller Reach Price
339305 150 mm 150 mm 312.00
Separator Spread 105 mm
Separator Reach 876 mm
CONTINUED >
Hydraulic Puller & Separator Kits CONTINUED >
1 Hydraulic Ram
1 Nose Piece
2 Ram Extensions 50, 100 mm
1 Double Yoke
1 Triple Yoke
3 100 mm Legs
3 150 mm Legs
1 Bearing Separator 20-105 mm
1 Cross Beam
2 250 mm Rod Assemblies
2 150 mm Extension Rods
4 300 mm Extension Rods
1 Metal Box
155208 Puller and Separator Kit
Stock No Puller Spread Puller Reach Price
339310 200 mm 200 mm 360.00
Separator Spread 105 mm
Separator Reach 876 mm
1 Hydraulic Ram
1 Nose Piece
2 Ram Extensions 50, 100 mm
1 Double Yoke
1 Triple Yoke
3 100 mm Legs
3 150 mm Legs
3 200 mm Legs
1 Bearing Separator 20-105 mm
1 Cross Beam
2 250 mm Rod Assemblies
2 150 mm Extension Rods
4 300 mm Extension Rods
1 Metal Box
155400 Puller and Separator Kit
Stock No Puller Spread Puller Reach Price
339315 250 mm 250 mm 500.00
Separator Spread 105 mm
Separator Reach 876 mm
1 Hydraulic Ram
1 Nose Piece
3 Ram Extensions 50, 100, 150 mm
1 Double Yoke
1 Triple Yoke
3 100 mm Legs
3 150 mm Legs
3 175 mm Legs
3 200 mm Legs
3 250 mm Legs
1 Bearing Separator 20-105 mm
1 Cross Beam
2 250 mm Rod Assemblies
2 150 mm Extension Rods
4 300 mm Extension Rods
1 Metal Box
155405 Puller and Separator Kit. Supplied on
metal storage panel.
Stock No Puller Spread Puller Reach Price
339320 250 mm 250 mm 556.00
Separator Spread 105 mm
Separator Reach 876 mm
1 Hydraulic Ram
1 Nose Piece
3 Ram Extensions 50, 100, 150 mm
1 Double Yoke
1 Triple Yoke
3 100 mm Legs
3 150 mm Legs
3 175 mm Legs
3 200 mm Legs
3 250 mm Legs
1 Bearing Separator 20-105 mm
1 Cross Beam
2 250 mm Rod Assemblies
2 150 mm Extension Rods
4 300 mm Extension Rods
1 Metal Storage Panel
1 Hook Kit
155700 Puller and Separator Kit. Includes
internal race extractor. Supplied on metal storage panel.
Stock No Puller Spread Puller Reach Price
339325 250 mm 250 mm 636.00
Separator Spread 105 mm
Separator Reach 876 mm
Internal Race Capacity 40-150 mm
1 Hydraulic Ram
1 Nose Piece
3 Ram Extensions 50, 100, 150 mm
1 Double Yoke
1 Triple Yoke
3 100 mm Legs
3 150 mm Legs
3 175 mm Legs
3 200 mm Legs
3 250 mm Legs
1 Bearing Separator 20-105 mm
1 Cross Beam
2 250 mm Rod Assemblies
2 150 mm Extension Rods
4 300 mm Extension Rods
1 Internal Race Extractor Attachment
1 Metal Storage Panel
1 Hook Kit
Hydraulic Puller & Separator Kit
Sykes Pickavant. Powered by 1600 series hydraulic ram.
Maximum thrust 16 tonnes. Supplied in wooden case.
Stock No Puller Spread Puller Reach Price
339330 400 mm 280 mm 1254.60
Separator Spread 175 mm
Separator Reach 780 mm
1 Hydraulic Ram 16 Tonnes
1 Nose Piece
1 Double Yoke
1 Triple Yoke
3 435 mm Legs
3 585 mm Legs
1 Bearing Separator 50-175 mm
1 Cross Beam
2 300 mm Rod Assemblies
4 300 mm Extension Rods
1 Wooden Case
Internal Race Extractor
Sykes Pickavant. For the extraction of bushes, sleeves
and bearings from blind housings, when the centre shaft
has been removed.
Stock No Capacity Reach Price
339335 40-150 mm 100 mm 189.20
Split Collet Internal Extractors
Sykes Pickavant. Extracts components quickly and
efficiently where conventional pullers cannot be used.
Collets expand within the bearing to grip internally.
Stock No Capacity Price
339340 6-8.5 mm 28.60
339341 8-11 mm 21.00
339342 10.5-13 mm 21.00
339343 13-18 mm 21.00
339344 18-22.5 mm 28.60
339345 22.5-30 mm 33.00
339346 30-38 mm 43.60
339347 38-50 mm 69.80
339348 50-60 mm 97.40

242
COLLET EXTRACTORS/PULLER KITS
Pulling Unit
Sykes Pickavant. Twin beam mechanical puller for use
with split collet internal extractors.
Stock No Description Price
339350 Two Leg Pulling Unit 49.50
Slide Hammer Puller Kit
Sykes Pickavant. With three straight and three cranked
reversible legs for internal and external pulling.
Adjustable cone ensures positive location, minimising
risk of slipping. Slide hammer allows tool to be used
where, due to the absence of a shaft, a conventional
puller cannot be used.
Stock No External Capacity Internal Capacity Price
339385 75 mm 105 mm 125.20
1 Slide Hammer Assembly
1 Adjustable Cone
1 Double Yoke
1 Triple Yoke
3 Straight Legs
3 Cranked Legs
Slide Hammer Puller Kit
Sealey brand. Set includes three sets of 100 mm triple leg
attachments for internal and external pulling.
Locking/gripping feature locks the jaws onto the gear or
bearing. Hammer weight 1.5 kg. Supplied in moulded
carry case.
Stock No External Capacity Internal Capacity Price
332136 20-130 mm 15-100 mm 143.96
Slide Hammer
Sykes Pickavant. Slide hammer assembly for use with split
collet internal extractors.
Hammer Hammer
Stock No Weight Displacement Price
339355 1 kg 220 mm 42.80
Extractor Sets
Sykes Pickavant. Sets of split collet internal extractors
complete with slide hammer assembly.
095801 Extractor Set
Stock No Contents Range Price
339360 4 pce 6-13 mm 72.80
3 Split Collet Internal Extractors
1 Slide Hammer Assembly
095802 Extractor Set
Stock No Contents Range Price
339365 4 pce 13-30 mm 89.60
3 Split Collet Internal Extractors
1 Slide Hammer Assembly
095803 Extractor Set
Stock No Contents Range Price
339370 4 pce 30-60 mm 188.00
3 Split Collet Internal Extractors
1 Slide Hammer Assembly
095804 Extractor Set. Supplied in metal case
Stock No Contents Range Price
339375 5 pce 8 - 22.5 mm 119.60
4 Split Collet Internal Extractors
1 Slide Hammer Assembly
1 Metal Carry Case
095800 Extractor Set. Supplied in metal case
Stock No Contents Range Price
339380 11 pce 6-60 mm 360.00
9 Split Collet Internal Extractors
1 Slide Hammer Assembly
1 Pulling Unit
1 Metal Carry Case
Combination Puller Kit
Sykes Pickavant. As Sykes Pickavant slide puller kit,
except that this kit also contains the components for
mechanical force screw operation. Maximum thrust 1
tonne.
Stock No External Capacity Internal Capacity Price
339390 75 mm 105 mm 176.00
1 Slide Hammer Assembly
1 Force Screw
1 Extension
1 Adjustable Cone
1 Double Yoke
1 Triple Yoke
3 Straight Legs
3 Cranked Legs
1 Metal Case
Extractor Set
Sealey brand. Set of split collet internal extractors
complete with medium stoke slide hammer. Hammer
weight 0.9 kg.
Stock No Contents Range Price
333894 5 pce 10-32 mm 111.96
4 Split Collet Internal Extractors 10-14, 15-19, 18-25,
25-32 mm
1 Slide Hammer Assembly
1 Carry Case
Looking for an item not listed?
Call our Sales Team on 01224 620944
Slide Hammer Puller / Dent Puller Kit
Sealey brand. Hammer weight 2.5 kg. Shaft length 570
mm. Use eight ways, external three jaws puller, internal
three jaw puller, external two jaw puller, internal two jaw
puller, hub puller, grip wrench adaptor, lip puller, dent
puller. Supplied in carry case.
Stock No Description Price
332138 Slide Hammer Kit 87.96
Internal Capacity: Two Legged 35-110 mm
Three Legged 50-135 mm
Reach 82 mm
External Capacity: Two Legged 50-140 mm
Three Legged 50-135 mm
Reach 75 mm
Slide Hammer Dent Puller Kit
Sealey brand. Hammer weight 2.3 kg.
Stock No Description Price
332140 9 pce Slide Hammer Kit 31.96
Slide Hammer
Adaptor
Large and Small Flat Hook
Large and Small Round Hook
Screw Holder
Self Tapping Screw
Taper Screw

DENT PULLERS/PANEL BEATING 243
Slide Hammer Dent Puller Kit
Sealey brand. Hammer weight 2.3 kg. Supplied in tough
carry case.
Stock No Description Price
332142 9 pce Slide Hammer Kit 34.36
Slide Hammer
Adaptor
Large and Small Flat Hook
Large and Small Round Hook
Screw Holder
Self Tapping Screw
Taper Screw
Storage Case
Rubber Heel Dolly
Sealey brand. Weighted hard rubber dolly. Rubber coating
provides cushioning. Works easily in recessed corners.
Stock No Dimensions Price
332148 285 x 80 x 45 mm 8.70
Deluxe Panel Beating Kit
Sealey brand. Fully polished, drop forged, steel dollies.
Professional, drop forged hammers with hickory handles.
Supplied in tough storage case.
Stock No Description Price
332132 5pce Panel Beating Kit 85.00
Shrinking Hammer
Pick Hammer
Toe Dolly
Curve Dolly
Drip Moulding Spoon
Slide Hammer Dent Puller
Sykes Pickavant. Cast iron hammer, weight 1.6 kg.
Replacement self-tapping screws are available.
Stock No Description Price
339392 Slide Hammer Dent Puller 58.00
Panel Beating Kit
Sealey brand. Fully polished, drop forged, steel dollies.
Drop forged steel hammer heads with composite handles
and rubber grips.
CB3 Panel Beating Set
Stock No Description Price
332128 3pce Panel Beating Kit 22.36
Body Hammer
Universal Dolly
Heel Dolly
Panel Beating Hammers
Sykes Pickavant. High quality, cast alloy steel heads with
hardened striking surfaces. Octagonal hickory shafts
secured with unique, wood and steel, double-wedge
system. Three face types available, flat, crowned and
shrinking, in round and square formats.
Suction Lifter/Dent Puller
Draper brand. Made from tough plastic with thick rubber
suction pad. Suitable for lifting glass and for pulling out
minor dents in body panels.
Stock No Cup Diameter Price
331438 118 mm 3.71
Standard Beating Hammer
Stock No Reference Weight Price
339400 05600000 0.425 kg 24.80
Face 1: Flat, Round, 41 mm
Face 2: Flat, Square, 38 mm
Suction Dent Puller
Sealey brand. Strong suction will pull out dents in body
panels, lift and move glass and aid handling. Release
suction by lifting the edge.
Stock No Cup Diameter Price
332146 150 mm 9.56
Panel Beating Kit
Sealey brand. Fully polished, drop forged, steel dollies.
Drop forged steel hammer heads with composite handles
and rubber grips.
CB7 Panel Beating Set
Stock No Description Price
332130 7pce Panel Beating Kit 63.96
Body Hammer
Pick Hammer
Bumping Hammer
Universal Dolly
Heel Dolly
Mushroom Dolly
Combination Dolly
Standard Beating Hammer
Stock No Reference Weight Price
339401 05610000 0.425 kg 24.80
Face 1: Crowned, Round, 41 mm
Face 2: Crowned, Square, 38 mm
Stock No 339392
CONTINUED >

244
PANEL BEATING
Panel Beating Hammers CONTINUED > Panel Beating Hammers CONTINUED >
Panel Beating Hammers CONTINUED >
Light Beating Hammer
Stock No Reference Weight Price
339402 05680000 0.368 kg 23.20
Face 1: Flat, Round, 32 mm
Face 2: Flat, Square, 25 mm
Pein and Finish Hammer
Stock No Reference Weight Price
339406 05300000 0.430 kg 24.80
Face 1: Flat, Round, 38 mm
Face 2: Pick
Curved Pein Hammer
Stock No Reference Weight Price
339410 05370000 0.425 kg 24.80
Face 1: Crowned, Round, 41 mm
Face 2: Curved Pein
Light Beating Hammer
Stock No Reference Weight Price
339403 05620000 0.368 kg 23.20
Face 1: Crowned, Round, 32 mm
Face 2: Crowned, Square, 25 mm
Pick and Finish Hammer
Stock No Reference Weight Price
339407 05660000 0.430 kg 24.80
Face 1: Crowned, Round, 38 mm
Face 2: Pick
Rubber Faced Mallet
Sykes Pickavant. Flat and cone shaped replaceable rubber
heads. Ideal for use on aluminium and light gauge steel.
Stock No Reference Weight Price
339415 5310000 0.575 kg 22.80
Dollies
Sykes Pickavant. Range of high quality craftsmans tools
for shaping and forming body panels. Drop forged from
alloy carbon steel, hand ground, zinc plated and polished.
Pein and Finish Hammer
Stock No Reference Weight Price
339404 05290000 0.425 kg 24.80
Face 1: Flat, Round, 41 mm
Face 2: Straight Pein
Shrinking Hammer
Stock No Reference Weight Price
339408 05690000 0.425 kg 27.20
Face 1: Flat, Round, 41 mm
Face 2: Shrinking, Square, 38 mm
US Style Dolly - Pronounced Edges
Stock No Reference Weight Price
339420 05410100 1.15 kg 25.56
L x W x D 90x55x35 mm
Pein and Finish Hammer
Stock No Reference Weight Price
339405 05650000 0.425 kg 24.80
Face 1: Crowned, Round, 41 mm
Face 2: Straight Pein
Shrinking Hammer
Stock No Reference Weight Price
339409 05280000 0.425 kg 27.20
Face 1: Shrinking, Round, 41 mm
Face 2: Shrinking, Square, 38 mm
CONTINUED > CONTINUED >
US Style Dolly - Regular Slim
Stock No Reference Weight Price
339421 05420100 1.05 kg 30.00
LxWxD 90x65x32 mm
CONTINUED >
Stock No 339404

PANEL BEATING 245
Dollies CONTINUED >
Dollies CONTINUED >
Dollies CONTINUED >
Thin Curved Dolly
Stock No Reference Weight Price
339422 05430100 0.90 kg 22.80
LxWxD 125x55x37 mm
Grid Toe Dolly
Stock No Reference Weight Price
339427 05500100 1.16 kg 37.20
LxWxD 120X58X28 mm
Curved Head Dolly
Stock No Reference Weight Price
339432 05560100 1.30 kg 25.56
LxWxD 125x90x70 mm
Radius Dolly
Stock No Reference Weight Price
339423 05440100 0.75 kg 25.56
LxWxD 140x55x40 mm
Utility Dolly
Stock No Reference Weight Price
339428 05520100 1.15 kg 22.36
LxWxD 76x57x58 mm
Round Head Dolly
Stock No Reference Weight Price
339433 05570100 0.73 kg 22.36
LxWxD 56x56x56 mm
Pinch Wedge Dolly
Stock No Reference Weight Price
339424 05460100 1.15 kg 35.60
LxWxD 130x68x25 mm
Thick Curved Dolly
Stock No Reference Weight Price
339429 05530100 1.35 kg 34.80
LxWxD 140x54x55 mm
Heavy Toe Dolly
Stock No Reference Weight Price
339434 05580100 1.37 kg 23.96
LxWxD 125x60x30 mm
Bumping Spoons
Sykes Pickavant. Range of high quality craftsmans tools
for roughing and prying in the preparation of body panels.
Thin Toe Dolly
Stock No Reference Weight Price
339425 05480100 0.86 kg 22.36
LxWxD 115x56x25 mm
Heel Dolly
Stock No Reference Weight Price
339430 05540100 1.08 kg 22.36
LxWxD 83x63x36 mm
Heavy Duty Pry Spoon
Stock No Reference Weight Price
339435 05120000 1.48 kg 33.20
LxW 405x63 mm
Stock No 339427
CONTINUED >
Anvil Dolly
Stock No Reference Weight Price
339426 05490100 1.40 kg 22.36
LxWxD 102x72x62 mm
Hatchet Dolly
Stock No Reference Weight Price
339431 05550100 0.84 kg 25.56
LxWxD 135x62x26 mm
CONTINUED > CONTINUED >

246
PANEL BEATING
Bumping Spoons CONTINUED >
Long Reach Dolly Spoon
Stock No Reference Weight Price
339436 05130000 1.80 kg 38.08
LxW 355x64 mm
Pry and Surfacing Spoon
Stock No Reference Weight Price
339437 05730000 1.10 kg 26.40
LxW 295X40 mm
General Purpose Spoon
Stock No Reference Weight Price
339438 05740000 1.10 kg 38.00
LxW 295x37 mm
Angled Surfacing Spoon
Stock No Reference Weight Price
339439 05780000 1.56 kg 33.00
LxW 185x45 mm
Stock No 330300
Bumping Tools
Sykes Pickavant. Curved serrated steel blades with
plastic coated handles. Suitable for removing bumps and
dents and for semi-finishing work on body panels. Milled
serrated teeth help prevent metal stretch.
Flat Blade Bumping Tool
Stock No Reference Weight Price
339450 05940000 0.72 kg 19.10
LxW 350x35 mm
Half Round Bumping Tool
Stock No Reference Weight Price
339455 05950000 0.68 kg 23.40
LxW 350x33 mm
Body Blade Holder
Sykes Pickavant. Adjustable holder complete with
standard cut flat blade. Suitable for forming and shaping
metals and fillers during bodywork repairs. Two position
handle. Quick action adjustment allows concave, flat or
convex working.
Body Blade Holder
Stock No Reference Length Price
330300 04021300 465 mm 50.36
Length is with handle in down position
Replacement Blades Blade size 356x33 mm
Stock No Description Teeth Price
330306 Plasticut 6.5 tpi 18.00
330308 Supercut 8 tpi 19.00
330309 Standard Cut 9 tpi 19.00
330313 Fine Cut 13 tpi 20.20
Door Lock Reforming Tools
Sykes Pickavant. Universal tool for reforming flush-fitting
and recessed door lock holes.
Stock No Reference Max Diameter Price
339460 05960000 50 mm 19.96
Body Repair Kits
Sykes Pickavant. Professional quality sets of panel
beating tools.
Body Repair Set - Starter Kit
Stock No Description Price
339465 6 pce Panel Beating Set 151.20
05600000 Standard Beating Hammer
05650000 Pein and Finish Hammer
05520100 Utility Dolly
05530100 Thick Curved Dolly
05580100 Heavy Toe Dolly
05730000 Pry and Surfacing Spoon
Body Repair Set - Lightweight Kit. For working
on aluminium and light gauge steel. Supplied in steel case.
Stock No Description Price
339470 6 Piece Panel Beating Set 127.20
05620000 Light Beating Hammer
05310000 Rubber Faced Mallet
05430100 Thin Curved Dolly
05480100 Thin Toe Dolly
05490100 Anvil Dolly
05940000 Flat Blade Bumping Tool
Body Repair Set - Standard Kit. General
purpose set of bodyshop tools. Supplied in steel case.
Stock No Description Price
339475 10 Piece Panel Beating Set 260.00
05600000 Standard Beating Hammer
05650000 Pein and Finish Hammer
05280000 Shrinking Hammer
05500100 Grid Toe Dolly
05520100 Utility Dolly
05530100 Thick Curved Dolly
05580100 Heavy Toe Dolly
05730000 Pry and Surfacing Spoon
05740000 General Purpose Spoon
05710000 Body File Holder
Body Repair Set - General Kit. Comprehensive
set of bodyshop tools. Supplied in steel case.
Stock No Description Price
339480 13 Piece Panel Beating Set 303.20
05620000 Light Beating Hammer
05650000 Pein and Finish Hammer
05660000 Pick and Finish Hammer
05280000 Shrinking Hammer
05310000 Rubber Faced Mallet
05500100 Grid Toe Dolly
05520100 Utility Dolly
05530100 Thick Curved Dolly
05580100 Heavy Toe Dolly
05730000 Pry and Surfacing Spoon
05740000 General Purpose Spoon
05780000 Angled Surface Spoon
05710000 Body File Holder
Body Repair Set - Master Kit. Supplied in steel
case.
Stock No Description Price
339485 20 Piece Panel Beating Set 452.00
05290000 Pein and Finish Hammer
05300000 Pick and Finish Hammer
05370000 Curved Pein Hammer
05600000 Standard Beating Hammer
05610000 Standard Beating Hammer
05620000 Light Beating Hammer
05280000 Shrinking Hammer
05310000 Rubber Faced Mallet
05500100 Grid Toe Dolly
05520100 Utility Dolly
05530100 Thick Curved Dolly
05570100 Round Head Dolly
05580100 Heavy Toe Dolly
05120000 Heavy Duty Pry Spoon
05730000 Pry and Surfacing Spoon
05740000 General Purpose Spoon
05780000 Angled Surface Spoon
05940000 Flat Blade Bumping Tool
05960000 Door Lock Reforming Tool
05710000 Body File Holder

BODY REPAIR KITS 247
SuperSnap Hydraulic Body Repair Kits CONTINUED > SuperPull Hydraulic Chassis Straightener CONTINUED >
Hydraulic Body Repair Kits
Sealey brand. Snap-together pipe and snap-together
attachments for bodyshop repair work. Supplied with
hydraulic hand pump, hose and hydraulic ram.
Compatible with most leading makes of snap-together
equipment. Supplied in steel case.
4 Tonne Body Repair Kit
Stock No Description Price
333900 18 Piece Body Repair Kit 135.96
804/01 Metal Box
804/A02 495 mm Extension
804/A03 420 mm Extension
804/A04 215 mm Extension
804/A05 125 mm Extension
804/A06 85 mm Extension
804/07 Serrated Saddle
610/11 Wedge Head
804/12 65 mm Rubber Head
804/13 Flat Base
804/14 Ram Toe
804/15 Plunger Toe
804/16 Wedge Head
804/17 90° V Base
804/18 Push-in Connector
604/40 4 Tonne Pump
804/41 4 Tonne Ram
610/42 Hydraulic Hose
10 Tonne Body Repair Kit
Stock No Description Price
333902 17 Piece Body Repair Kit 191.96
810/01 Metal Box
810/A02 685 mm Extension
610/A3 480 mm SuperSnap Extension
810/A04 255 mm Extension
810/A05 125 mm Extension
810/07 Serrated Saddle
610/11 Wedge Head
810/12 90 mm Rubber Head
810/13 Flat Base
810/14 Ram Toe
810/15 Plunger Toe
810/16 Wedge Head
810/17 90° V-Base
810/18 Push-in Connector
610/40 10 Tonne Pump
810/41 10 Tonne Ram
610/42 Hydraulic Hose
4 Tonne SuperSnap Body Repair Kit
Stock No Description Price
333904 20 Piece Body Repair Kit 143.96
604/1 Carry Case
604/A2 530 mm SuperSnap Extension
604/A3 455 mm SuperSnap Extension
604/A4 255 mm SuperSnap Extension
604/A5 165 mm SuperSnap Extension
604/A6 85 mm Tube Adaptor
604/7 Serrated Saddle
604/8 Male Connector
604/A9 Male Adaptor
604/A10 Female Adaptor
610/11 Wedge Head
604/12 70 mm Rubber Head
604/13 Flat Base
604/14 Ram Toe
604/15 Plunger Toe
604/16 Wedge Head
604/17 90° V-Base
604/40 4 Tonne Pump
604/41 4 Tonne Ram
610/42 Hydraulic Hose
10 Tonne SuperSnap Body Repair Kit
Stock No Description Price
333906 20 Piece Body Repair Kit 239.96
610/1 Carry Case
610/A2 560 mm SuperSnap Extension
610/A3 480 mm SuperSnap Extension
610/A4 280 mm SuperSnap Extension
610/A5 125 mm Tube Adaptor
610/A6 75mm Tube Adaptor
610/7 Serrated Saddle
610/8 Male Connector
610/9 Male Adaptor
610/10 Female Adaptor
610/11 Wedge Head
610/12 Rubber Head
610/13 Flat Base
610/14 Ram Toe
610/15 Plunger Toe
610/16 Wedge Head
610/17 90° V-Base
610/40 10 Tonne Pump
610/41 10 Tonne Ram
610/42 Hydraulic Hose
All body repair kit components listed are available
separately. Components are compatible with most
leading makes of hydraulic repair kits.
10 Tonne Variable Tilt Chassis Straightener.
Seven position tilting upright.
Stock No Description Price
333910 SuperPull Chassis Straightener 719.96
1 Chassis Frame
1 Hydraulic Pump c/w Hose
1 Hydraulic Ram
2 Pull Clamps
2 Sill Clamps
2 Chains
3 Chain Hooks
1 Carriage Anchorage Tube
2 Tube Stands
Air Hydraulic Pump
Air operated hydraulic pump; for use with Supersnap
body repair kits and SuperPull chassis straighteners.
Supplied with or without air hose.
10 Tonne Air Operated Pump
Stock No Air Pressure Hydraulic Pressure Price
333912 60-120 psi 10,000 psi 199.96
10 Tonne Air Operated Pump. Supplied complete
with air hose.
Stock No Air Pressure Hydraulic Pressure Price
333914 60-120 psi 10,000 psi 231.96
SuperSnap Pull Ram
Suitable for use with manual or air hydraulic pump.
Supplied with connectors and two chain claws.
Stock No Description Price
333916 5 Tonne Pull Kit 111.96
SuperSnap Hydraulic Body Repair Kits
SuperSnap kits feature snap-together pipe for speed and
threaded attachments for strength. Components are
manufactured from high quality steel and finished with
supergloss paint. Connecting parts are zinc or cadmium
plated for corrosion protection.
CONTINUED >
SuperPull Hydraulic Chassis Straightener
Sealey Superpull 10 tonne chassis straightener. Proven
performance; one of the best selling chassis repair
systems in the UK. Heavily reinforced frame and heavy
duty components. Supplied with SuperSnap hydraulic
pump and ram.
10 Tonne Chassis Straightener
Stock No Description Price
333908 SuperPull Chassis Straightener 639.96
1 Chassis Frame
1 Hydraulic Pump c/w Hose
1 Hydraulic Ram
2 Pull Clamps
2 Sill Clamps
2 Chains
3 Chain Hooks
1 Carriage Anchorage Tube
2 Tube Stands
CONTINUED >
Chain Kit
Used in conjunction with Supersnap pull ram. Kits
contain two chains complete with hooks and two heavy
duty pull clamps.
Stock No Chain Length Price
333918 1.5 Metres 231.96

248
CLAMPS & PULLERS
Extra Long Sill Clamps
Two position clamps, extra positional choice for the
carriage anchorage tube. Will fit where standard sill
clamps won’t. Extra length means they grip the sill tighter.
Supplied in pairs.
Stock No Description Price
333920 Two Position Long Sill Clamps 175.96
Large Hook Pulling Kit
Sealey brand. For reaching over wide obstructions. Ideal
for inside boot recesses. Reduces chain marking.
Supplied with two sizes of feet and adaptor for
SuperSnap screw-on accessories.
Stock No Capacity Price
333938 6 Tonnes 111.96
Safety Cable
Sealey brand. Used in conjunction with pull clamps. In
the event of the pull clamp becoming detached from the
vehicle bodywork, the safety cable will restrain the chain
and minimise the risk of injury.
Stock No Length Price
333948 2 Metres 47.96
Hooks & Chain Shortener
Sealey brand. All have 6 tonne capacity.
Stock No Description Price
333922 Hook with Ring Connector 31.95
333924 Hook with Fork Connector 31.96
333926 Double Hook with Fork Connector 59.96
333928 Chain Shortener 37.96
MacPherson Strut Pulling Kit
Sealey brand. Clamps to strut tower and allows 360°
alignment. Top hook permits realignment of sunken tower
assemblies. Can be used with Sealey large hook pulling
kit.
Stock No Capacity Price
333940 10 Tonnes 239.96
Aperture Restraining Bars
Sealey brand. Manufactured from steel tube with heavy
jaw assemblies. Designed to triangulate and strengthen
door apertures during pulling operations. Supplied with
tommy bar. Jaw width 90 mm. Supplied in pairs.
Stock No Min. Length Max. Length Price
333950 830 mm 1160 mm 139.96
Pull Clamps
Sealey brand. Four types are available.
Two Directional Pull Clamp
Stock No Size Capacity Price
333930 35 mm 4 Tonnes 119.96
Universal Pull Clamp. With rotating ring.
Stock No Size Capacity Price
333932 100 mm 6 Tonnes 199.96
Deep Jaw Self Locking Clamp
Stock No Size Capacity Price
333934 60 mm 10 Tonnes 219.96
Right Angle Pull Clamp
Stock No Size Capacity Price
333936 100 mm 6 Tonnes 189.96
Wheel Arch Pullers
Sealey brand. Suitable for small/lightweight pulls,
including wheel arches and around light clusters. Two
sizes available.
Stock No Length Capacity Price
333942 160 mm 1.5 Tonnes 47.96
333944 320 mm 1.5 Tonnes 51.16
Multi-Hole Pull Plate
Sealey brand. Bolts directly onto chassis. Prevents chain
marking.
Stock No Capacity Price
333946 6 Tonnes 79.96
Hydraulic Door Remover/Installer
Sealey brand. Supports, lifts and transports car doors.
Eases vertical alignment of hinges. Suitable for roadgoing
cars. Fitted with 75 mm castors.
Stock No Capacity Price
333952 200 kg 119.96
Min Height 200 mm
Max Height 370 mm
Min Aperture 570 mm
Max Aperture 1170 mm
Stock No 333930

JOGGLERS/ABRASIVE HOLDERS/SPOT WELD TOOLS 249
Telescopic Trammel Gauge
Metric only. Obtains precise dimensional data for chassis
alignment purposes. Four piece, telescopic pole with
integral measuring tape gives direct read-out of distance
between pole ends. Pole has three measuring probes
attached, one at each end and one central one. The
central probe can slide along the pole.
Stock No Description Price
333954 Chassis Alignment Trammel Gauge 399.96
Telescopic Probe Min Distance 1050 mm
Max Distance 3000 mm
Mid/End Probes Min Distance 170 mm
Max Distance 730 mm
Rolastep Flanging Tools
Sykes Pickavant. Two drive rollers, turned by socket or
spanner, produce continuous lapped joint on sheet metal
up to 1.2 mm thick. Rollers can be adjusted for metal
thickness to avoid distortion. Lightweight, portable tool.
Two sizes available.
Stock No Flange Width Price
339490 12 mm 92.00
339495 17 mm 92.00
Flat Cutting Chisel
Manufactured from chrome vanadium alloy steel.
Suitable for cutting spot welds.
Stock No Length Price
333962 235 mm 11.16
Door Skin Folding Tool
Suitable for pre-forming and finishing door skins onto
door frames. Also suitable for joining sheet material.
Fitted with nylon pad to prevent deformation.
Stock No Length Price
333956 300 mm 79.96
Body Filler Applicator Set
Four piece set. Spring steel blades with composite grips.
Stock No Blade Sizes Price
333958 12, 25, 50, 75 mm 4.76
Panel Cutting Chisel
Manufactured from chrome vanadium alloy steel. Double
edged chisel for cutting body panels.
Stock No Length Price
333964 205 mm 13.56
Joggler
Produces a 10 mm stepped panel edge, creating a flush
lap joint for easier welding. Spring loaded handle with
non-slip PVC grips.
Stock No Length Price
165023 280 mm 63.60
Rubber Sanding Block
Accepts 100 mm wide abrasive strips. Comfortable
contoured grip.
Stock No Description Price
333960 Rubber Abrasive Holder 4.36
Spot Weld Drills
Heavy duty stub length drills with thick web made from
8% cobalt alloyed HSS steel for cutting welding spots and
thin walled work pieces without centring.
Stock No Size Overall Length Price
013506 6 mm 66 mm 7.03
013508 8 mm 79 mm 6.82
Joggler & Punch
Double-sided rotating head. One side produces a 10 mm
stepped panel edge, creating a flush lap joint for easier
welding. Turn the head and a strong hole punch will
produce 6 mm holes for spot welding. Spring loaded
handle with non-slip PVC grips.
Stock No Length Price
165020 290 mm 63.60
Abrasive Holder
Sykes Pickavant. Accepts 70 mm wide abrasive strips.
Wooden handle and body. Steel, quick release clips for
securing the abrasive strip.
Stock No Description Price
339500 Abrasive Holder 39.46
Stock No 333954
Spot Weld Cutters
Quickly drills out spot welds from sheet material without
tearing or deformation.
Stock No Size Price
350300 10 mm 12.76

250
PUNCHES/SHEET METAL CUTTERS & FOLDERS
Metal Hole Punch 5 mm
Cuts holes in sheet metal for MIG/spot welding. Maximum
sheet metal thickness 1 mm. Spring loaded handle.
Stock No Length Throat Depth Price
333966 290 mm 25 mm 59.95
Metal Hole Punch 6 mm
Sykes Pickavant. Specialist tool for punching holes in
body panels and arches. Enables alignment and assists in
producing stronger welded joints. Shaped head fits over
gutters, wing panels and wheel arches. Long, 250 mm
handles ensure minimum effort required for rapid hole
punching.
Stock No Length Capacity Price
339502 335 mm 1.2 mm 92.79
Facom Punch Kits
For cutting clean accurate circular gaskets. Small sizes
are cut using punches and large sizes are cut using
calipers.
245.J1 Standard Kit. Cuts 3-30 mm using punches
and 56-330 mm using calipers. Supplied in a plastic case.
Stock No Description Price
336400 Gasket Cutting Kit 88.50
Punch Sizes 3, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28,
30 mm
245.J2 Maintenance Kit. Cuts 3-50 mm using
punches and 44-420 mm using calipers. Supplied in a
plastic case.
Stock No Description Price
336410 Gasket Cutting Kit 173.12
Punch Sizes 3, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28,
30, 32, 34, 36, 38, 40, 42, 44, 46, 48, 50 mm
Replacement punches available.
245A.C Calipers. Cuts 44-420 mm
Stock No Description Price
336420 Gasket Cutting Calipers 55.05
Heavy Duty Sheet Metal Cutter
Sykes Pickavant. Bench mounted machine with ratchet
action roller cutters. Allows straight or curved cutting of
sheet metal up to 3.2 mm thick. Supplied with bench
mounting bracket. Replacement cutter wheels available.
Stock No Description Price
339510 Sheet Metal Cutter 192.00
339512 Replacement Cutter Wheels (Pair) 58.36
Metal Punch Set
Heavy duty, drop forged tool with compound lever action.
Punches and dies hardened to 50-52 HRC. Suitable for
precision hole punching in steel, aluminium, brass,
copper and plastic up to 14 gauge thickness. Adjustable
throat depth up to a maximum of 50 mm.
Stock No Hole Sizes Price
333968 3
⁄32, 1 ⁄8, 5 ⁄32, 3 ⁄16, 7 ⁄32, 1 ⁄4, 9 ⁄32" 45.96
Stock No 336400
Sheet Metal Cutter
Sykes Pickavant. Bench mounted machine with ratchet
action roller cutters. Allows straight or curved cutting of
sheet metal up to 1.6 mm thick. Replacement cutter
wheels and vice mounting block are available.
Stock No Description Price
339504 Sheet Metal Cutter 76.00
339506 Replacement Cutter Wheels (Pair) 38.25
339508 Vice Mounting Block 12.05
Metal Cutting Shears
Sealey brand. Designed to be bolted to a work bench.
Long handle for maximum leverage. Fitted with hardened
steel shear blades for accurate cutting and long life.
Stock No Capacity 1 Capacity 2 Price
333970 3 mm 8 mm 87.96
333972 4 mm 10 mm 103.96
333974 6 mm 13 mm 119.96
Capacity 1 is steel sheet
Capacity 2 is round bar
Sheet Metal Folder
Sealey brand. Vice mounted sheet metal folder for
bending mild steel sheet up to 22 gauge/0.7 mm thick and
600 mm wide.
Stock No Description Price
333976 Vice Mounted Metal Folder 103.96
Large volume user and require a quotation?
Call Grahame our Sales Director on 01224 615030

SHEET METAL FOLDERS/GREASE GUNS 251
Sheet Metal Folder
Sealey brand. Bench mounted sheet metal folder for
bending mild steel sheet up to 17 gauge/1.4 mm thick and
760 mm wide.
Stock No Description Price
333978 Bench Mounted Metal Folder 63.96
Sheet Metal Folder
Sealey brand. Floor standing sheet metal folder for
bending mild steel sheet up to 22 gauge/0.7 mm thick and
910 mm wide.
Stock No Description Price
333980 Floor Standing Metal Folder 239.96
Sheet Metal Folder
Sykes Pickavant. Vice mounted sheet metal folder for
bending mild steel sheet up to 18 gauge/1.2 mm thick and
610 mm wide. Complete with protractor for accurate
measurement of fold angles. Produces up to 100° folds,
suitable for manufacturing box and channel sections.
Stock No Description Price
339514 Vice Mounted Metal Folder 263.99
Minimum Box Section Size 60x60 mm
Minimum Channel Size 51 mm Wide x 16 mm Deep
Sheet Metal Folder
Sykes Pickavant. Floor standing sheet metal folder for
bending mild steel sheet up to 18 gauge/1.2 mm thick and 1
metre wide. Floor stand can be bolted down for added
safety. Produces up to 100° folds, suitable for
manufacturing box and channel sections. Reaction
brackets strengthen clamping and folding blades to
minimise distortion and allow tight bends to be formed.
Stock No Description Price
339516 Floor Standing Metal Folder 679.58
Minimum Box Section Size 75x75 mm
Minimum Channel Size 115 mm Wide x 50 mm Deep
Grease Gun
Manufactured by Pressol, Germany. Standard, lever
operated, grease gun with rigid angled spout, 4 jaw
coupler and air bleed valve. Two way fill; manual or
cartridge/ Accepts standard 400 g cartridge.
Stock No Capacity Price
264100 500 cc 8.95
High Pressure Grease Gun
Manufactured by Pressol, Germany. Heavy duty, lever
operated, grease gun with rigid angled spout, 4 jaw
coupler and air bleed valve. Suitable for medium, heavy
and stiff grease including silicone grease. Three way fill;
pump, manual or cartridge. Accepts standard 400 g
cartridge.
Stock No Capacity Price
264110 500 cc 32.65
Alemite Grease Gun
Manufactured in USA by Alemite Corporation. Heavy
duty, high quality, lever operated grease gun with rigid
angled spout, 3 jaw coupler end air bleed valve.
Maximum operating pressure 10,000 psi. Three way fill;
pump, manual or cartridge.
Stock No Capacity Price
264850 500 cc 29.95
Pistol Grease Gun
Manufactured by Pressol, Germany. Compact, one-hand
operated, pistol grease gun with rigid straight spout, 4
jaw coupler and air bleed valve. Two way fill; pump or
manual.
Stock No Capacity Price
264120 125 cc 6.50
Air Operated Grease Gun
Manufactured by Pressol, Germany. Trigger operated,
single pulse, grease gun with flexible delivery tube, 4 jaw
coupler and air bleed valve. Three way fill; pump, manual
or cartridge.
Stock No Capacity Price
264400 500 cc 33.94
Stock No 339514
Air Operated Grease Gun
Manufactured by Pressol, Germany. With continuous
grease delivery. Trigger operated grease gun with rigid
straight spout, 4 jaw coupler and air bleed valve. Three
way fill; pump, manual or cartridge.
Stock No Capacity Price
264410 500 cc 55.89

252
GREASE GUN ACCESSORIES/OIL GUNS
Grease Gun Accessories
Pressol grease gun accessories with 1 ⁄8" BSP
connections.
Delivery Tubes
Stock No Description Price
264170 6" Rigid Angled Tube 1.23
264180 6" Rigid Straight Tube 1.11
264190 12" Flexible Tube 2.17
264195 20" Flexible Tube 2.75
Couplers
Stock No Description Price
264140 4 Claw Coupler 0.98
264150 Hook-on Coupler 2.10
264145 Push-on Coupler 2.05
264130 Pointed Coupler 1.00
Grease Cartridge
Delta 2EP multi-purpose grease, supplied by Miller Oils.
Stock No Weight Price
264910 400 g 2.03
Needle Nose Extension
Fits all leading brands of manual grease gun. Dispenses
fine bead of grease. Long nozzle gives access to hard to
reach areas, ideal for lubricating constant velocity joints.
Stock No Length Price
264802 170 mm 9.56
Grease Nipple Cleaner
Clears grease nipples of hardened materials. Fits straight
and angled nipples.
Stock No Length Price
264804 133 mm 12.95
Grease Nipples
Hydraulic grease nipples. Conform to DIN71412
H1 Straight Grease Nipples
Stock No Thread Quantity Price
264531 M6 x 1 100 6.30
264541 M8 x 1 100 8.75
264544 M8 x 1.25 100 20.03
264551 M10 x 1 100 9.98
264554 M10 x 1.5 100 25.00
264561 1
⁄8" NPT 100 29.87
264501 1
⁄8" BSP 100 9.30
264511 1
⁄4" BSP 100 19.98
264520 1
⁄4" UNF 100 6.05
264571 1
⁄4" BSW 100 24.33
264574 1
⁄4" BSF 100 7.00
264575 5
⁄16" BSF 100 31.20
H1 Straight Grease Nipples. Stainless Steel.
Stock No Thread Quantity Price
264580 M6 x 1 25 31.26
264581 M8 x 1 25 48.40
264582 M10 x1 25 55.32
264583 1
⁄8" NPT 25 58.10
264584 1
⁄8" BSP 25 58.10
264585 1
⁄4" BSP 25 82.59
H2 45º Offset Grease Nipples
Stock No Thread Quantity Price
264532 M6 x 1 100 15.10
264542 M8 x 1 100 17.49
264545 M8 x 1.25 100 42.93
264552 M10 x 1 100 19.98
264555 M10 x 1.5 100 45.03
264502 1
⁄8" BSP 100 18.00
264512 1
⁄4" BSP 100 31.97
264522 1
⁄4" UNF 100 66.26
264576 1
⁄4" BSF 100 44.25
H3 90º Offset Grease Nipples
Stock No Thread Quantity Price
264533 M6 x 1 100 15.10
264543 M8 x 1 100 17.49
264546 M8 x 1.25 100 42.93
264553 M10 x 1 100 19.98
264556 M10 x 1.5 100 45.03
264503 1
⁄8" BSP 100 18.00
264513 1
⁄4" BSP 100 31.97
264523 1
⁄4" UNF 100 66.26
264577 1
⁄4" BSF 100 44.20
Button Head Grease Nipples
Hydraulic grease nipples. Conform to DIN 3404.
Stock No Thread Quantity Price
264596 M8 x 1 100 63.67
264597 M10 x 1 100 63.67
264598 1
⁄8" BSP 100 17.95
264599 1
⁄4" BSP 100 21.85
Grease Nipple Sets
Supplied in partitioned plastic boxes. Standard push-on
grease nipples. Conform to DIN 71412.
70 Piece Set
Stock No Description Price
264590 Grease Nipple Assortment 28.21
Straight: M6x1, M8x1, M10x1, 1 ⁄8" BSP
45º Offset: M6x1, M8x1, M10x1
90º Offset: M6x1, M8x1, M10x1
140 Piece Set
Stock No Description Price
264591 Grease Nipple Assortment 57.65
Straight: M6x1, M8x1, M10x1, 1 ⁄8" BSP
45º Offset: M6x1, M8x1, M10x1, 1 ⁄8" BSP
90º Offset: M6x1, M8x1, M10x1, 1 ⁄8" BSP
Lever Operated Oil Gun
Manufactured by Pressol, Germany. High pressure, lever
operated, oil gun with rigid angled spout and 4 jaw
coupler.
Stock No Capacity Price
264445 500 cc 32.36
Oil Suction Guns
Manufactured by Pressol, Germany.
Zinc Plated Steel Gun. With 350 ml flexible hose.
Stock No Capacity Price
264430 500 ml 6.95
Brass Gun. With 150 ml rigid spout.
Stock No Capacity Price
264420 500 ml 21.50
Stock No 264445

GREASE FILLING SYSTEMS 253
Pneumatic Grease Systems CONTINUED >
Mobile Grease Supply System. For 50 kg
containers. Fitted with 2 metre delivery hose.
Stock No Delivery Pressure Delivery Rate Price
264495 6,000 psi 1.1 kg/min 455.19
Mobile Grease Supply System. For 200 kg
containers. Fitted with 10 metre delivery hose on hose reel.
Stock No Delivery Pressure Delivery Rate Price
264496 6,000 psi 1.1 kg/min 977.22
Grease Gun Filling Systems
Manufactured by Pressol, Germany. For direct filling of
grease guns through the valve on their head. Manual
pump unit, dust cover, adjustable stabilising fixing
bracket and follower plate.
Stock No Size Price
264497 12.5 kg Buckets, 240-270 mm Diameter 98.10
264498 25k kg Buckets, 310-335 mm Diameter 128.22
264499 50 kg Buckets, 335-385 mm Diameter 136.56
Manual Grease Systems
Manufactured by Pressol, Germany. Two part system,
manual pump and trigger operated grease gun. Manual
pump consists of pump unit, dust cover, adjustable
stabilising fixing bracket, follower plate and 1500 mm
discharge hose. Pump is connected to grease gun by a
quick release adaptor with a non-return valve. The one
hand operated grease gun has a capacity of 125 cm 3 and
a delivery pressure of 8000 psi.
Stock No Size Price
264492 12.5 kg Buckets, 240-270 mm Diameter 107.99
264493 25k kg Buckets, 310-335 mm Diameter 216.03
Stock No 264494
Manual Grease Units
Sealey brand. Manual unit that consists of pump that
attaches to grease bucket with a 1500 mm delivery hose
connected to a rigid delivery tube.
AK45X Grease Unit. Standard unit with 4 jaw
coupler for connecting to grease nipples, DIN 71412.
Stock No Size Price
264806 12.5 kg Buckets, 240-270 mm Diameter 67.96
Delivery Pressure 2,900 psi
Delivery Rate/Stroke 3.8 cm 3
AK455 Grease Unit. High pressure, low volume unit
with 4 jaw coupler for connecting to grease nipples, DIN
71412.
Stock No Size Price
264808 12.5 kg Buckets, 240-270 mm Diameter 159.96
Delivery Pressure 6,000 psi
Delivery Rate/Stroke 1.5 cm 3
AK456 Chassis Lube Grease Unit. High volume,
low pressure unit, designed for use on chassis with bulk
filling nipples. Complete with nipple adaptors for use on
all vehicles.
Stock No Size Price
264810 12.5 kg Buckets, 240-270 mm Diameter 143.96
Delivery Pressure 900 psi
Delivery Rate/Stroke 33 cm 3
Pneumatic Grease Systems
Manufactured by Pressol, Germany. Mobile grease
supply systems, operated by workshop air supply.
Features include
• High specification, 50: 1 pneumatic pump.
• Fitted with pressure reducing valve (pre-set at 115 psi)
• Fitted with pressure regulator, moisture separator and
lubricator.
• Fitted with dust cover, stabilising-fixing bracket and
follower plate.
• High pressure delivery hose.
• Z-swivel joint.
• High pressure grease gun.
• Male quick release adaptor.
• Trolley.
Mobile Grease Supply System. For 12.5 kg
containers. Fitted with 2 metre delivery hose.
Stock No Delivery Pressure Delivery Rate Price
264494 6,000 psi 1.1 kg/min 318.49
CONTINUED >
Pneumatic Grease Pump Accessories
Pressol brand accessories for use with mobile pneumatic
grease delivery systems.
Grease Hoses. For connecting pneumatic pump to
grease gun. Maximum operating pressure 6,000 psi. End
connections 1 /4" BSP female and 1 /4" BSP male with 60º
sealing cones.
Stock No Length Internal Diameter Price
264701 1 metre 6 mm 15.48
264702 2 metres 6 mm 28.10
264705 5 metres 6 mm 47.56
264710 10 metres 6 mm 96.99
264715 15 metres 6 mm 129.64
Hose Storage Rack. Wall mounted device, suitable
for storing grease hoses.
Stock No Description Price
264720 Hose Storage Rack 49.94
Flexible Grease Hose. End connections 1 /4" BSP
female with 60º sealing cones. One end connector is 90º
swivel connector. Maximum operating pressure 6000 psi.
Stock No Length Internal Diameter Price
264725 1.5 metres 6 mm 23.23
Grease Gun. High pressure grease control gun
designed to operate at 400 bar with 100 bar manual
pressure boosting system. With rigid angled spout and
4 jaw coupler. For DIN 71412 grease nipples.
Stock No Max. Operating Pressure Weight Price
264730 8,000 psi 0.9 kg 49.94
Grease Gun. High pressure grease control gun
designed to operate at 400 bar with 100 bar manual
pressure boosting system. With rigid straight spout and
Rectus female quick release coupler, type 72. For filling
centralised lubricating systems.
Stock No Max. Operating Pressure Weight Price
264735 8,000 psi 1.05 kg 84.12
Swivel Joints. For use with Pressol high pressure
grease control guns. With ball bearing joints, easily
moveable at high pressure. Operating pressure 6,000 psi.
Stock No Description Price
264740 Swivel Joint 1 x 360 º 14.56
264741 Rotary Swivel Joint 2 x 360 º 30.03
264742 Rotary Z Swivel Joint 3 x 360 º 37.92
Connection 1: 1/8" BSP Male
Connection 2: 1/4" BSP Female
BSP Connectors. For use with Pressol high pressure
grease delivery systems.
Stock No Connection 1 Connection 2 Price
264750 1/4" BSP Male 1/4" BSPT Male 5.14
264751 1/4" BSP Male 1/2" BSPT Male 9.07
264752 3/8" BSP Male 1/2" BSPT Male 9.07
264753 3/8" BSP Male 3/8" BSP Male 8.65
264754 1/4" BSP Male 1/8" BSP Female 3.27

254
FUNNELS/LIQUID STORAGE
Plastic Funnels
Pressol plastic funnels with straight spout.
Plastic Funnels.
Stock No Size Capacity Price
264302 50 mm 0.05 l 0.39
264303 75 mm 0.09 l 0.65
264304 100 mm 0.25 l 0.46
264305 120 mm 0.27 l 0.91
264306 150 mm 0.70 l 0.88
264308 200 mm 2.9 l 1.90
264310 250 mm 3.2 l 3.96
264314 350 mm 10.0 l 16.28
Plastic Funnel. Complete with handle and
removable strainer.
Stock No Size Capacity Price
264380 160 mm 1.3 l 4.07
Plastic Funnel Set.
Stock No Description Price
264318 4 Piece Funnel Set 2.81
Sizes are 50, 75, 100, 120 mm
Metal Funnels
Pressol metal funnels with straight spouts.
Tin Plate Funnels. Complete with handle and
removable strainer.
Stock No Size Capacity Price
264330 160 mm 1.2 l 10.74
264340 200 mm 3.2 l 12.43
Galvanised Steel Funnel. Complete with handle
and removable strainer.
Stock No Size Capacity Price
264350 200 mm 3.2 l 14.34
Flexible Steel Spout. Fits Pressol metal funnels in
this section, plus stock no. 264380, 160 mm plastic funnel.
Stock No Length Price
264360 300 mm 4.80
Replacement Strainer. Fits Pressol metal funnels in
this section, plus stock nos. 264380, 264316 and 264325,
160 mm plastic funnels.
Stock No Diameter Price
264390 52 mm 0.93
Oil Measures
Tinplate oil measuring jugs.
Conical Oil Measures
Stock No Size Price
264916 0.5 litre 3.90
264918 1 litre 5.00
264920 2 litres 6.55
264922 5 litres 9.50
264924 10 litres 46.10
Conical oil measures can be Government stamped for the
resale of fluids. There is a fee for this service.
Oil Measures c/w Integral Flexible Metal Spouts
Stock No Size Price
264252 1 litre 13.72
264254 2 litres 15.27
Plastic Funnels
Plastic funnels with offset spouts.
Plastic Funnel. Complete with handle and removable
strainer. Spout aperture offset by 210 mm.
Stock No Size Capacity Price
264316 160 mm 1.3 l 2.60
Three Piece Funnel. Complete with removable
strainer. Oval funnel head with interchangeable straight
and angled spouts.
Stock No Size Price
264610 125 x 210 mm (Oval) 2.62
Tractor Funnels
Pressol, heavy duty, tractor funnel with water/diesel
separating filter.
Tractor /Garage Funnel
Stock No Size Capacity Price
264320 280 x 190 mm 4.0 l 3.90
Replacement Filter. Water/Diesel Separating Filter
Stock No Diameter Price
264321 55 mm 1.10
Liquid Measures
Pressol, white, transparent, liquid measures. Funnel
shaped pouring spout, with mounting for optional flexible
spout. Made from polyethylene, oil acid and fuel
resistant. Graduated in litres and UK and US quarts and
gallons.
Liquid Measures/Pourers
Stock No Capacity Price
264260 0.5 litre 2.87
264270 1 litre 3.26
264280 2 litres 3.79
264285 3 litres 9.06
264290 5 litres 7.04
Flexible Spouts. For Pressol liquid measures.
Stock No Fits Price
264368 0.5, 1 litre 1.50
264369 2 litres 1.50
264370 3, 5 litres 1.50
Plastic Funnels
Plastic funnels with flexible spouts. Complete with
handle and removable strainer.
Stock No Size Price
264620 110 mm 1.34
264325 160 mm 2.75
Plastic Funnels
Plastic funnels with anti-splash rims. Complete with filter
and flexi-spout. Moulded from high density polyethylene.
Stock No Diameter Price
264912 150 mm 4.65
264914 230 mm 5.90
We accept Visa and Mastercard, Debit and Credit Cards
Tinplate Storage Cans
Pressol storage cans, for use in industry and workshop.
Hinged cover, angled discharge spout with captive cap.
Carrying handle.
Stock No Capacity Price
264436 3 litres 32.75
264438 5 litres 34.51
264440 10 litres 35.84

LIQUID STORAGE 255
Plastic Fuel Cans
TUV and UN approved 5 litre fuel cans. Made from high
density plastic. Flexible pouring spout, fits unleaded fuel
tanks. Colour coded for easy identification of contents.
Stock No Colour Fuel Price
264926 Red Lead Replacement 6.50
264928 Green Unleaded 6.50
264930 Black Diesel 6.50
Jerry Cans
Traditional mild steel jerry cans painted externally and
coated internally for fuel and water resistance. UN
approved standard and specification, suitable for water,
petrol and diesel.
Jerry Cans
Stock No Size Price
264005 5 litres 13.95
264010 10 litres 14.95
264020 20 litres 15.50
Jerry Can Spouts. Clamp-on pouring spouts to suit
all traditional metal jerry cans.
Stock No Type Length Price
264035 Rigid Spout 180 mm 5.50
264040 Flexible Spout 280 mm 4.95
Jerry Can Bracket. Lockable vehicle mounting
bracket for 20 litre jerry can. With anti-vibration mounts.
Padlock not included.
Stock No Size Price
264812 Jerry Can Vehicle Bracket 29.56
Stainless Steel Jerry Can
Stainless steel construction with flexible aluminium
pouring spout that can be stored inside the can. For the
safe storage, transportation and dispensing of fuels and
flammable liquids. Dimensions H355 x W250 x L345 mm
Stock No Capacity Weight Price
264042 20 litres 4.5 kg 105.95
For ease and accuracy when placing
orders please use our stock number
Metal Fuel Cans
Range of high quality, durable cans for the safe storage,
transportation and dispensing of fuels and flammable
liquids. Suitable for diesel and petrol. Vented for easy
pouring action.
Fuel Cans. Made from galvanised steel, painted
externally. Plastic flexible pouring spout.
Stock No Capacity Height Price
264044 5 litres 140 mm 13.99
264046 10 litres 208 mm 17.99
264048 20 litres 242 mm 21.99
Stackable Fuel Cans. Made from galvanised steel,
painted externally. Plastic and aluminium flexible pouring
spout that can be stored inside the can. Folding handle and
shaped top and base allow these cans to be safely stacked.
Stock No Capacity Height Price
264050 5 litres 127 mm 16.99
264052 10 litres 210 mm 19.99
264054 20 litres 246 mm 25.99
Stainless Steel Stackable Fuel Cans. Made
from stainless steel with plastic and aluminium flexible
pouring spout that can be stored inside the can. Folding
handle and shaped top and base allow these cans to be
safely stacked.
Stock No Capacity Height Price
264056 5 litres 127 mm 61.99
264058 10 litres 210 mm 66.99
264060 20 litres 246 mm 78.99
Safety Fuel Cans
Round storage and transportation cans that incorporate
flame arrestors at both filling and dispensing apertures.
For the safe storage, transportation and dispensing of
fuels and flammable liquids. Made from terne coat steel,
painted externally, with a 300 mm long flexible pouring
spout.
Stock No Capacity Height Diameter Price
264062 5 litres 220 mm 240 mm 34.15
264064 10 litres 340 mm 240 mm 39.95
Safety Disposal Cans
Paramount brand. For the storage and disposal of
flammable and aggressive liquids and solvents.
Features include:
• Made from 0.7 mm terneplate steel to BS 1449, Part 1
• All seams double turned and hand soldered.
• Integral flame arrestor.
• Large diameter (76 mm) filling/pouring spout.
• Trigger operated airtight cap.
CONTINUED >
Safety Disposal Cans CONTINUED >
• Self-sealing and self-closing.
• Carrying handle doubles as trigger guard.
• Additional back pouring handle.
• Powder coated in yellow (safety colour)
Stock No Capacity Height Diameter Price
264066 2.5 litres 250 mm 178 mm 42.60
264068 5 litres 275 mm 240 mm 46.90
264070 10 litres 410 mm 240 mm 53.35
264072 15 litres 510 mm 240 mm 59.65
264074 25 litres 510 mm 310 mm 74.95
Safety Dispensing Cans
Paramount brand. For the controlled dispensing of
flammable and aggressive liquids and solvents. Features
include:
• Made for 0.7 mm terneplate steel to BS 1449, Part 1
• All seams double turned and hand soldered
• Integral flame arrestors at filling and pouring apertures
• Large diameter (76 mm) filling aperture
• Trigger operated dispensing
• Flexible 'stayput' 300 mm dispensing spout
• Carrying handle doubles as trigger guard
• Additional back pouring handle
• Powder coated in yellow (safety colour)
Stock No Capacity Height Diameter Price
264076 5 litres 275 mm 240 mm 82.70
264078 10 litres 410 mm 240 mm 88.80
264080 15 litres 510 mm 240 mm 95.70
264082 25 litres 510 mm 310 mm 104.65
Oilcans
Pressol red metal oilcans with plastic pump and rigid
spout.
Metal Oilcans. Thumb operated lever action
Stock No Capacity Price
264200 125 ml 3.90
264210 250 ml 4.85
264220 350 ml 5.05
264230 500 ml 5.51
Replacement Spouts
Stock No Type Length Price
264240 Flexible 210 mm 1.21
264250 Rigid 135 mm 1.79
Stock No 264042

256
OILERS/SPRAYERS/PUMPS
Barrel Pump CONTINUED >
Rotary Barrel Pump. With steel discharge pipe.
Tool Box Oilers
Stock No Pump Volume Price
264480 0.25 l/stroke 30 l/min 23.86
Rotary Barrel Pump. Discharge through steel spout
or 2 metre PVC hose with anti-kink spring and steel outlet.
Stock No Pump Volume Price
264485 0.25 l/stroke 30 l/min 84.70
Pressol leakproof oilers. Made from translucent
polyethylene, with brass spout with locking leakproof nozzle.
Stock No Capacity Price
264256 125 ml 3.51
264258 250 ml 3.63
Barrel Pump
Pressol lift type barrel pump. Made from chemical
resistant polypropylene with Viton seals. With 2" BSP
and 2" buttress male threads and M70x6 thread adaptor.
Two part suction tube, overall length 940 mm. Suitable
for containers from 60 - 220 litres. For anti-freeze,
cleaners, mild acids and solvents.
Stock No Pump Volume Price
264465 0.2 l/stroke 20 l/min 57.48
Sprayers
Pressol chemical sprayers. Bottle made from
polyethylene. Sprayer head has adjustable, closeable
nozzle. Stable, conical bottle design.
Household Sprayer. For water-based,
non-aggressive liquids.
Stock No Capacity Height Price
264392 750 ml 280 mm 4.51
Industrial Sprayer. Suitable for detergents, solvents
and cleaning agents
Stock No Capacity Height Price
264394 750 ml 290 mm 7.17
Gear Oil Pump
Pressol manual gear oil pump. With 2" BSP female
container coupling. Fits most UK 25 litre containers.
Pump head made from impact-resistant, die-cast zinc.
Pump body made from galvanised steel. Steel suction
tube, 500 mm long. Discharge through 1.5 metre hose
with steel spout. For oils up to SAE 140 and other
viscous, self-lubricating, non-aggressive media.
Stock No Pump Volume Price
264760 0.05 l/stroke 6 l/min 89.02
Barrel Pump
Pressol lever type barrel pump. With 2" BSP and M64 x 4
barrel coupling. Impact-resistant, die cast zinc housing.
Two part plastic suction tube that can be cut to length,
maximum length 1200 mm. Suitable for containers from
60 - 220 mm litres. For oils up to SAE 50, undiluted antifreeze,
fuel oil, diesel and petrol. Discharge through 1
metre PVC hose with plastic outlet.
Stock No Pump Volume Price
264470 0.14 l/stroke 18 l/ min 31.47
Barrel Pump
Pressol lift type barrel pump. With 2" BSP and M64x4
barrel coupling. Made from steel with plastic discharge
spout. All exposed steel surfaces galvanised. Suction
tube length 840 mm. Suitable for containers from 60-220
litres. For oils up to SAE 90, undiluted anti-freeze, fuel oil,
diesel and petrol.
Stock No Pump Volume Price
264460 0.72 l/stroke 20 l/min 18.53
Barrel Pump
Pressol rotary barrel pump. With 2" BSP barrel coupling.
Die cast steel housing. Three part steel suction tube,
overall length 980 mm. Suitable for containers from 60 -
220 litres. Easy to operate manual rotation with high
transmission ratio. For oils up to SAE90, fuel oil, diesel,
petrol and non-aggressive, self-lubricating media.
CONTINUED >
Pneumatic Diesel Pump
Pressol pneumatic pump, 1:1 ratio. Suitable for diesel,
fuel oil and engine oil up to SAE 15. High delivery rate.
Maximum length of discharge hose 10 metres. Supplied
complete with pressure regulator with gauge, moisture
filter and lubricator. Specifications:
• Recommended air pressure 115 psi
• Air connection 1 /4" BSP
• Discharge connection 3 /4" BSP
• Container connection 2" BSP
• Suction tube connection 1" BSP
Pneumatic Pump. With 860 mm suction tube
Stock No Application Price
264762 210 l Container 385.09
Pneumatic Pump. With 1200 mm suction tube
Stock No Application Price
264764 Bulk Tank 397.57

PUMPS 257
Pneumatic Diesel Pump Accessories
Pressol accessories for use with diesel barrel pumps.
Discharge Hoses. High volume diesel and oil hoses.
Operating pressure 105 bar (15,000 psi). Threaded
connections at both ends.
Stock No Length Internal Diameter Price
264766 1 metre 20 mm 31.86
264768 3 metres 20 mm 57.77
264770 5 metres 20 mm 75.34
264772 8 metres 20 mm 111.73
Connection 1: 3 /4" BSP Female
Connection 2: 3 /4" BSP Male (With 60º Sealing Cone)
Connecting Hose. Diesel and oil hose. Operating
pressure 105 bar (15,000 psi). Threaded connections at
both ends.
Stock No Length Internal Diameter Price
264774 1.5 metres 20 mm 55.31
Connection 1: 3 /4" BSP Female
Connection 2: 3 /4" BSP Female (With Swivel 90º Bend)
Diesel Nozzle. Nozzle for use with Pressol 1:1
pneumatic pumps. Manual switch off. Specifications:
• Connection 1" BSP swivel
• Max flow rate 60 l/min
• Max pressure 8 bar (115 psi)
Stock No Description Price
264776 Control Valve for Diesel/Oil 39.70
Pneumatic Oil Pump Accessories
Pressol accessories for use with oil barrel pumps.
Discharge Hoses. Oil discharge hoses. Operating
pressure 100 bar (14,500 psi). Threaded connections at
both ends.
Stock No Length Internal Diameter Price
264782 1 metre 12 mm 23.23
264784 2 metres 12 mm 29.03
264786 5 metres 12 mm 61.27
264788 10 metres 12 mm 94.88
264790 15 metres 12 mm 151.73
Connection 1: 1/2" BSP Female (With 60º Sealing Cone)
Connection 2: 1/2" BSP Male (With 60º Sealing Cone)
Connecting Hose. Oil hose. Operating pressure 100
bar (14,500 psi). Threaded connections at both ends.
Stock No Length Internal Diameter Price
264792 1.5 metres 12 mm 29.32
Connection 1: 1 /2" BSP Female
Connection 2: 1 /2" BSP Male (With Swivel 90º Bend)
Oil Control Nozzle. Anti-drip nozzle for use with
Pressol 3:1 pneumatic pumps. Auto and manual
switch-off Specifications:
• Connection 1 /2" BSP swivel
• Max pressure 60 bar (870 psi)
Stock No Description Price
264794 Oil Discharge Nozzle 52.82
Electric Diesel/Fluid Barrel Pumps
Sealey brand. Lightweight, portable, electric pump kit.
Mounts directly onto drum or tank, ideal for on-site filling.
Suitable for diesel, paraffin and other high flash point
fluids. Thermal overload protection. On/off switch.
Available for use with 12v, 24v or 230v power supply.
Supplied complete with 4 metre delivery hose with
manual delivery nozzle and suction hose with filter.
12 Volt Diesel Barrel Pump
Stock No Flow Rate Duty Cycle Price
264816 38 l/min 60 min 207.96
Power 180 W
Speed 7000 rpm
24 Volt Diesel Barrel Pump
Stock No Flow Rate Duty Cycle Price
264818 43 l/min 60 min 207.96
Power 240 W
Speed 7000 rpm
230 Volt Diesel Barrel Pump
Stock No Flow Rate Duty Cycle Price
264820 52 l/min 60 min 207.96
Power 320 W
Speed 10,000 rpm
Pneumatic Oil Pump
Pressol pneumatic pump, 3:1 ratio. Designed for pumping
oils up to SAE 90. Ideal for direct connection to pipe
lines up to 70 metres. Supplied complete with pressure
regulator with gauge, moisture filter and
lubricator. Specifications:
• Recommended air pressure 115 psi
• Air connection 1 /4" BSP
• Discharge connection 1 /2" BSP
• Container connection 2" BSP
• Suction tube connection 3 /4" BSP
Pneumatic Pump. With 860 mm suction tube
Stock No Application Price
264778 210 l Container 229.23
Pneumatic Pump. With 1200 mm suction tube
Stock No Application Price
264779 Bulk Tank 330.83
Pneumatic Pump. With 1500 mm suction tube
Stock No Application Price
264780 Bulk Tank 355.32
12 Volt Submersible Pump
Sealey brand. Robust and compact, fits through standard
2" BSP barrel aperture. Suitable for refuelling/fluid
transfer. Use with diesel, non-aggressive chemicals and
fresh or dirty water. End cap can be unscrewed for
periodic cleaning of filter. Supplied with 3 metre outlet
house with stainless steel nozzle and 4 metre battery
cable with clips.
Stock No Flow Rate Duty Cycle Price
264814 16.5 l/min 15 min 49.96
Stock No 264782
Electric Diesel/Fluid Transfer Pumps
Sealey brand. Self priming, low voltage pump kits.
Suitable for diesel, paraffin and other high flash point
fluids. On/off switch. Supplied with battery clips for use
with 12V or 24V power supply. Supplied complete with
mounting plate, 4 metre delivery hose with manual
delivery nozzle and suction hose with filter.
12 Volt Diesel Transfer Pump
Stock No Flow Rate Duty Cycle Price
264822 40 l/min 30 min 231.96
Power 140 W
Speed 2800 rpm
24 Volt Diesel Transfer Pump
Stock No Flow Rate Duty Cycle Price
264824 40 l/min 30 min 231.96
Power 160 W
Speed 2800 rpm
12 Volt High Volume Transfer Pump. High flow
pump unit with bypass valve.
Stock No Flow Rate Duty Cycle Price
264826 85 l/min 30 min 415.96
Power 240 W
Speed 2000 rpm
24 Volt High Volume Transfer Pump. High flow
pump unit with bypass valve.
Stock No Flow Rate Duty Cycle Price
264828 85 l/min 30 min 415.96
Power 240 W
Speed 2000 rpm

258
PUMPS/DRUM ACCESSORIES
Drill Powered Pump
Draper brand. Compact, lightweight pump, used in
conjunction with an electric drill. For use with hose with
13 mm bore diameter. Not suitable for flammable liquids.
Stock No Flow Rate Price
018110 16 l/min 6.80
Flow rate applies when the drill is operating at 2000 rpm.
Plastic Barrel Tap
White, polyethylene, barrel tap.
Stock No Thread Price
264454 3/4" BSP 0.95
Disposable Drip Trays
Tinplate drip trays c/w absorbent pads. Diameter 380
mm. Supplied in packs of five.
Stock No Applications Price
264940 Oils Only 13.00
264942 Chemicals and Oils 13.00
Drill Powered Pump
Draper brand. Compact, lightweight pump, used in
conjunction with an electric drill of 400 W or more.
Acetal copolymer body with stainless steel internal parts.
For use with hose with 16 mm bore diameter. Supplied
complete with replacement washers and vanes.
Stock No Flow Rate Price
018112 40 l/min 25.65
Flow rate applies when drill is operating at 2,000 rpm.
Barrel Tap
Self-closing, lockable barrel tap, manufactured from
aluminium alloy.
Stock No Thread Price
264448 3/4" BSP 6.48
Drum Opening Key
Manufactured from plated mild steel with non-slip rubber
grip. Four-sided head, suitable for steel and plastic drums.
Stock No Length Price
264456 320 mm 13.95
Barrel Bund
Sealey brand. For the safe upright storage of two 205
litre drums. Manufactured from galvanised steel.
Stock No Sump Capacity Price
264830 450 litres 343.96
LxWxH 1340x800x315 mm
Drum Stands
Allows safe storage of 205 litre drums in horizontal
position for quick dispensing of contents. Radiused
frame helps tilt drum from vertical to horizontal.
Static Drum Stand.
Stock No Height from Ground Price
264948 280 mm 61.00
Mobile Drum Stand. With two fixed and two castor
wheels.
Stock No Height from Ground Price
264950 330 mm 90.00
Mobile Drum Stand. With two fixed and two castor
wheels. Also with top drum rollers to allow rotation of
drum.
Stock No Height from Ground Price
264952 330 mm 108.00
Height from Ground indicates the distance between the
ground and the bottom of the drum.
Brass Barrel Tap
Self-closing, lockable barrel tap, complete with integral
flame arrestor. Teflon seal. Flexible, stainless steel,
screw-on extension spout is available.
Stock No Thread Price
264450 Brass Barrel Tap 3 /4" BSP 12.90
264452 Flexible Extension Spout 200 mm 9.95
Stock No 264456
Drip Trays
For use under drum taps etc to collect drips and leaks.
With integral carrying handles.
Galvanised Steel Drip Trays.
Stock No Size Price
264932 560 x 300 x 25 mm 11.65
264934 560 x 600 x 38 mm 12.90
Galvanised Steel Drip Trays. With mesh covers.
Stock No Size Price
264936 560 x 300 x 25 mm 16.20
264938 560 x 600 x 38 mm 21.00
Drum Stacking Unit
Stand and stacking unit for 210 litre drums. Holds three
drums. Units can be stacked three high. Designed to
accommodate a fork lift truck.
Stock No Dimensions Price
264954 168 x 77 x 19 cm 145.00

DRUM ACCESSORIES/INSPECTION MIRRORS 259
Drum Lifter
Lifting tool to up-end 210 litre drums from horizontal to
vertical.
Stock No Description Price
264956 Manual Drum Lifter 46.00
Tilting Drum Stand
Cradle for 25 litre drums. Allows controlled pouring of
drum contents. Remains in position; does not swing.
Suits round or square, polythene or metal drums.
Stock No Description Price
267145 25 Litre Drum Cradle 76.50
Proto Inspection Mirrors
Made in USA. With versatile, all-angle, ball joints.
Circular Inspection Mirrors
Stock No Mirror Diameter Length Price
217010 22 mm 190 mm 5.76
217015 32 mm 205 mm 5.96
217020 57 mm 255-355 mm 8.42
Stock number 217020 features a telescopic handle.
Rectangular Inspection Mirror. Telescopic
handle.
Stock No Mirror Size Length Price
217025 55 x 90 mm 285-395 mm 8.42
Drum Trolleys
Drum trolleys designed for 210 litre steel drums, but
which will handle other drum sizes. Sliding clip secures
drum firmly.
Drum Trolley. With two 12" solid rubber wheels.
Stock No Description Price
267100 Steel Drum Trolley 165.00
Drum Trolley. With two 12" pneumatic rubber wheels.
Stock No Description Price
267105 Steel Drum Trolley 220.00
Drum Trolley. As stock number 267100, but with
additional rear leg with 6" rubber castor wheel.
Stock No Description Price
267110 Steel Drum Trolley 210.00
Trolleys for 210 litre plastic drums with top and bottom
rims are also available.
Inspection Mirror
Ball joint head swivels to any position. Plated finish with
plastic grip.
Stock No Mirror Diameter Length Price
217000 55 mm 370 mm 6.14
Telescopic Inspection Mirror
Telescopic handles. Ball joint head swivels to any
position.
Stock No Mirror Diameter Length Price
217310 32 mm 165 - 480 mm 4.45
217300 38 mm 125 - 685 mm 4.53
217320 57 mm 230 - 360 mm 4.91
Stock numbers 217310 and 217300 have pocket clips.
Illuminated Inspection Mirror
Fully flexible shaft that maintains its position once bent to
the required shape. Versatile, all-angle, ball joint, mirror
head. Oval mirror. Light bulb located in shaft just behind
mirror head.
Stock No Mirror Size Length Price
217090 25 x 50mm 500 mm 17.96
Illuminated Inspection Mirror
Telescopic shaft with pocket clip. Fixed mirror head.
Light bulb located in shaft just behind mirror head.
Stock No Mirror Diameter Length Price
217250 20 mm 210 - 250 mm 11.00
Drum Dollies
Drum dollies for 210 litre steel drums. Inner diameter 620
mm.
Drum Dolly. Triangular design allows easy loading by
drum trolleys. With three 3" heavy duty nylon castors.
Stock No Description Price
267115 Three Wheeled Drum Dolly 71.00
Drum Dolly. Circular design. With four 3" heavy duty
nylon castors.
Stock No Description Price
267120 Four Wheeled Drum Dolly 49.95
Flexi-Shaft Inspection Mirror
Fully flexible shaft that maintains its position once bent to
the required shape. Fixed mirror head. Plated finish with
plastic grip.
Stock No Mirror Diameter Length Price
217005 55 mm 470 mm 6.50
Pick-Up Tools
Flexible shaft pick-up tool with four-finger claw at one
end controlled by spring-loaded push action at other end.
Economy Pick-Up Tool
Stock No Length Price
217200 610 mm 1.94
CONTINUED >

260
RETRIEVING TOOLS/MAGNIFIER/HOOK & PICK SETS
Pick-Up Tools CONTINUED >
Ullman Pick-Up Tools. All-steel pick-up tools
manufactured in USA by Ullman Corporation.
Stock No Length Price
217202 340 mm 5.89
217205 600 mm 6.88
Round Magnifier
Plastic, lightweight, magnifying glass. Main lens
magnification 3X, with inset lens magnification 6X.
Stock No Lens Diameter Price
217100 50 mm 3.50
Helping Hand Bracket
Magnetic Retrieving Tools
Magnetic pick-up tools with telescopic handles.
Slimline Pick-Up Tool. With pocket clip.
Stock No Capacity Length Price
217230 0.62 kg 130 - 640 mm 2.74
Standard Pick-Up Tool. With pocket clip.
Stock No Capacity Length Price
217235 2.5 kg 175 - 760 mm 4.74
3-in-1 Pick-Up Tool. With three interchangeable
heads.
Stock No Capacity Length Price
217260 2.3 kg 175 - 900 mm 11.48
Three interchangeable magnetic heads
1. 15 mm diameter, 1.4 kg capacity, fixed head
2. 18 mm diameter, 2.3 kg capacity, fixed head
3. 18 mm diameter, 2.3 kg capacity, swivel head
Proto Magnetic Retrieving Tools
Made in USA. With versatile, all-angle, ball joints.
Retrieving Tool. With pocket clip.
Stock No Length Price
217215 215 mm 5.76
Telescopic Retrieving Tool
Stock No Length Price
217220 425 - 680 mm 12.03
Folding Magnifier
Plastic, lightweight, magnifying glass that folds into PVC
storage wallet. Lens magnification 3X.
Stock No Lens Diameter Price
217105 40 mm 5.22
Round Magnifier
Hand held magnifier with eight 25 mm diameter lenses.
Lenses are rotated into view by knurled edge of lens
holder. Lens magnifications are 5,6,7,8,9,10,11,12X.
Stock No Overall Diameter Price
217106 90 mm 6.11
Illuminated Magnifier
Plastic, lightweight magnifier. Main lens magnification
2X, pull-out lens magnification 8X. Main lens can be
illuminated to facilitate book or map reading in poor light.
Ideal for in-car use.
Stock No Overall Length Price
217108 150 mm 7.71
Suitable for electronic work, model and jewellery making.
Complete with two fully adjustable holding clips and 50
mm diameter magnifying lens (2.5X magnifying). Solid
cast base improves stability.
Stock No Description Price
273340 Helping Hand Bracket 6.42
Hook & Pick Set
Qualitec brand. Blades made from heat-treated, chrome
vanadium steel; handles from tough PVC.
Stock No Description Price
217360 4 pce Hook and Pick Set 4.73
Contents 1 Straight Tip
1 90º Tip
1 Hook Tip
1 Combination Tip
Hook & Pick Set
Made in USA by Ullman Corporation. Handle with four
interchangeable screw-in blades. Handle fitted with
magnetic pick-up. Supplied in plastic wallet.
Stock No Description Price
217115 4 pce Hook and Pick Set 7.95
Contents 1 Straight Tip
1 90º Tip
1 Hook Tip
1 Combination Tip
Flexi-Shaft Magnetic Retrieving Tool
Made in USA by Ullman Corporation. Fully flexible shaft
that snakes easily into hard-to-reach areas. Powerful,
life-long magnet.
Stock No Length Price
217210 445 mm 8.88
Stock No 217108

HOOK & PICK SETS/PARTS TRAYS/MAGNETS 261
Micro Hook & Pick Set
Made in USA by Ullman Corporation. Dental type micro
picks.
Stock No Description Price
217110 5 pce Hook and Pick Set 13.58
Contents
1 Straight Tip
1 Hook Tip
1 45 º Tip
1 Bayonet Tip
1 Double Angle Tip
Vertical Magnetic Parts Tray
For the storage of nuts, bolts, screws etc while working.
Tray has rubber protected magnetic back for affixing to
vertical steel surfaces. Magnetism transfers to inner
surface of tray to retain small steel parts.
Stock No Dimensions Price
337210 240 x 115 x 30 mm 11.98
337212 310 x 115 x 30 mm 13.10
Magnetic Holders
Magnetic clamps for hands-free welding, soldering and
assembly work. Features 45º, 90º and 135º angles.
Stock No Capacity Length Price
217910 20 kg 85 mm 8.78
217920 35 kg 112 mm 11.98
O Ring & Seal Puller
Universal seal puller for use on O rings, oil and grease
seals. Particularly suitable for commercial vehicle
applications.
Stock No Length Price
331380 325 mm 5.49
Magnetic Parts Trays
For the storage of nuts, bolts, screws etc while working.
Tray has magnetic base for affixing to vehicle bodywork,
tool boxes etc. Magnetism transfers to inner surface of
tray to retain small steel parts.
Steel Parts Tray
Stock No Dimensions Price
337214 230 x 140 mm 6.99
Stainless Steel Parts Tray
Stock No Dimensions Price
337216 360 x 160 mm 19.34
Shallow Pot Magnets
Permanent magnets by Eclipse Magnetics, Sheffield.
Manufactured from Alcomax III with mild steel body.
Stock No Capacity Hole Thread Price
217826 3 kg M3 3.55
217827 5 kg M4 5.01
217828 13 kg M4 7.96
Diameter Height
Stock No. 217826 19.1 mm 7.5 mm
Stock No. 217827 28.6 mm 8.7 mm
Stock No. 217828 38.1 mm 10.4 mm
Gasket Scraper
Hardened and tempered carbon steel blade, comfortable
grip.
Stock No Blade Width Price
336070 25 mm 3.53
Magnetiser/Demagnetiser
Made in USA by Ullman Corporation. Magnetises and
demagnetises screwdrivers and other small tools in
seconds. Can also be used to pick up screws, bolts and
other small steel objects.
Stock No Description Price
217240 Magnetiser/Demagnetiser 4.65
Magnetic Parts Bowls
For the storage of nuts, bolts, screws etc while working.
Tray has magnetic base for affixing to vehicle bodywork,
tool boxes etc. Magnetism transfers to inner surface of
tray to retain small steel parts.
Standard Parts Bowl
Stock No Diameter Price
337218 145 mm 5.78
Deep Parts Bowl
Stock No Diameter Price
337220 86 mm 7.17
Deep Pot Magnets
Permanent magnets by Eclipse Magnetics, Sheffield.
Manufactured from Alcomax III with mild steel body and
aluminium spacer. Can be used in temperatures up to
220ºC.
Stock No Capacity Hole Thread Price
217831 2.6 kg M6 3.55
217832 4.0 kg M6 3.99
217833 6.1 kg M6 6.02
217834 14.7 kg M6 10.61
Diameter
Height
Stock No. 217831 17.5 mm 16 mm
Stock No. 217832 20.5 mm 19 mm
Stock No. 217833 27.0 mm 25 mm
Stock No. 217834 35.0 mm 30 mm
Stock No 217110

262
MAGNETS
Button Magnets
Permanent magnets by Eclipse Magnetics, Sheffield.
Manufactured from Alnico. Can be used in temperatures
up to 550ºC.
Stock No Capacity Hole Size Price
217821 0.7 kg 4.5 mm 2.07
217822 1.9 kg 4.8 mm 2.72
217823 3.4 kg 4.8 mm 4.80
217824 4.8 kg 7.1 mm 8.23
Diameter
Height
Stock No. 217821 12.5 mm 9.5 mm
Stock No. 217822 19.1 mm 12.7 mm
Stock No. 217823 25.4 mm 15.9 mm
Stock No. 217824 31. 8 mm 25.4 mm
Flexible Magnets
Adhesive backed, flexible magnetic strip; supplied by
Eclipse Magnetics, Sheffield. Manufactured from
Strontium Ferrite. Can be cut with a scissors.
Stock No Length Width Price
217905 10 Metres 12.5 mm 8.78
217900 10 Metres 20 mm 13.69
Magnetic Rail
Wall or tool chest mounted magnetic rack for frequently
used tools. Supplied with fixing screws.
Stock No Length Width Price
333982 500 mm 40 mm 9.16
Pocket Magnets
Permanent magnets by Eclipse Magnetics, Sheffield.
Manufactured from Alnico. Horse-shoe shape. Can be
used in temperatures up to 550ºC.
Stock No Capacity Gap Width Price
217802 2.4 kg 7.9 mm 2.79
217803 4.0 kg 15.9 mm 6.17
Length Height Width
Stock No. 217802 22.2 mm 25.4 mm 7.9 mm
Stock No. 217803 27.0 mm 35.0 mm 15.9 mm
Power Magnets
Permanent, U-shaped magnets by Eclipse Magnetics,
Sheffield. Manufactured from Alcomax. Can be used in
temperatures up to 550ºC.
Stock No Capacity Hole Size Price
217811 4.5 kg 5 mm 8.63
217812 9.0 kg 5 mm 13.23
217813 11.8 kg 5 mm 18.28
217814 23.5 kg 2 x 7.9 mm 33.93
217815 37.0 kg 2 x 7.9 mm 55.20
217816 47.0 kg 2 x 9.5 mm 94.54
Length Height Width
Stock No. 217811 30 mm 20 mm 20 mm
Stock No. 217812 40 mm 25 mm 25 mm
Stock No. 217813 45 mm 30 mm 30 mm
Stock No. 217814 58 mm 35 mm 41 mm
Stock No. 217815 70 mm 41 mm 57 mm
Stock No. 217816 79 mm 54 mm 83 mm