surface mount scottsdale - high impact and low ... - LSI Industries Inc.
surface mount scottsdale - high impact and low ... - LSI Industries Inc.
surface mount scottsdale - high impact and low ... - LSI Industries Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SURFACE MOUNT SCOTTSDALE ® - HIGH IMPACT AND LOW PROFILE OPTICS<br />
<strong>LSI</strong> OUTDOOR LIGHTING AREA<br />
LOW PROFILE LENS<br />
DIMENSIONS<br />
dotted line<br />
indicates<br />
ceiling<br />
15-13/16" Sq.<br />
(402mm)<br />
15-13/16" Sq.<br />
(402mm)<br />
High Impact<br />
Low Profile<br />
HIGH IMPACT LENS<br />
5-3/16"<br />
(132mm)<br />
4-1/2"<br />
(114mm)<br />
5-3/16"<br />
(132mm)<br />
5-15/16"<br />
(151mm)<br />
dotted line<br />
indicates<br />
ceiling<br />
U.S. Patents D375,379; 5,662,407; 6,059,422; 6,224,233 <strong>and</strong> Pat. Pend.CA2276077 &<br />
CA2381049 Patentado 8,956 <strong>and</strong> Patentado 199,294<br />
HIGH IMPACT LENS<br />
LENS/GASKET - Dropped borosilicate<br />
prismatic glass lens with a continuous<br />
one-piece extruded <strong>high</strong> temperature<br />
gasket to ensure maximum sealing to the<br />
housing.<br />
REFLECTORS/DISTRIBUTION PATTERNS<br />
- A vertical burn optical system <strong>and</strong><br />
symmetrical <strong>high</strong>ly specular reflector<br />
provide a uniform distribution of light,<br />
reduce hot spots <strong>and</strong> add additional<br />
illumination to vertical <strong>surface</strong>s. Internal<br />
shielding <strong>and</strong> soft lighting diffuser<br />
options are available. Photometric data<br />
is tested in accordance with IESNA<br />
guidelines.<br />
LOW PROFILE LENS - Available in<br />
200 Watt PSMV<br />
LENS/GASKET - Borosilicate shal<strong>low</strong><br />
glass lens with a continuous one-piece<br />
extruded <strong>high</strong>-temperature gasket to<br />
ensure maximum sealing to the housing.<br />
REFLECTORS/DISTRIBUTION PATTERNS<br />
- A vertical burn optical system <strong>and</strong><br />
symmetrical reflector provide uniform<br />
general lighting. Photometric data<br />
is tested in accordance with IESNA<br />
guidelines.<br />
HOUSING - A one-piece die-formed<br />
aluminum housing with powder coated<br />
finish. One conduit knock-out <strong>and</strong> four<br />
<strong>mount</strong>ing holes.<br />
DOOR FRAME - Features an integral<br />
hinged die-cast aluminum lens frame.<br />
Door frame closes <strong>and</strong> locks with<br />
stainless steel spring catch. This al<strong>low</strong>s<br />
for easy access for ground re-lamping.<br />
LIGHT SOURCE - Pulse-Start Metal Halide<br />
or Pulse-Start Metal Halide Reduced.<br />
Clear lamp is supplied as st<strong>and</strong>ard.<br />
BALLASTS - High-power factor type<br />
ballasts. Pulse-Start Metal Halide fixtures<br />
feature CWA ballast, designed for -20<br />
degree F operation.<br />
INSTALLATION/MOUNTING - Traditional<br />
<strong>surface</strong> <strong>mount</strong> installation al<strong>low</strong>s for<br />
all components to be installed from<br />
underneath the soffit. Mounting <strong>surface</strong>s<br />
must support a 75 pound weight test.<br />
FINISH - Each fixture is finished with<br />
<strong>LSI</strong>’s DuraGrip ® polyester powder coat<br />
finishing process. The DuraGrip finish<br />
withst<strong>and</strong>s extreme weather changes<br />
without cracking or peeling, <strong>and</strong> is<br />
guaranteed for five full years. St<strong>and</strong>ard<br />
color is white.<br />
PHOTOMETRICS - Please visit our web site<br />
at www.lsi-industries.com for detailed<br />
photometric data.<br />
SHIPPING WEIGHTS<br />
Catalog Number Est. Weight (kg/lbs.) Length (mm/in.) Width (mm/in.) Height (mm/in.)<br />
SCSM - PG<br />
SCSM - LP<br />
17/37<br />
16/35<br />
445/17.5<br />
445/17.5<br />
445/17.5<br />
445/17.5<br />
384/15.125<br />
384/15.125<br />
wet location<br />
08/07/09<br />
© 2009<br />
<strong>LSI</strong> INDUSTRIES INC.<br />
Project Name<br />
Catalog #<br />
Fixture Type
SURFACE MOUNT SCOTTSDALE ® - HIGH IMPACT AND LOW PROFILE OPTICS<br />
LUMINAIRE ORDERING INFORMATION<br />
TYPICAL ORDER EXAMPLE:<br />
Luminaire<br />
Prefix<br />
SCSM<br />
Distribution<br />
S - Symmetrical<br />
SCSM S 320 PSMV PG MT WHT<br />
Lamp<br />
Wattage<br />
175<br />
250<br />
320<br />
400<br />
200<br />
Light Source<br />
PSMV - Pulse-Start Metal Halide<br />
175, 250, 320 Watt<br />
PSMVR - Pulse-Start Metal Halide<br />
Reduced 400 Watt<br />
PSMV - Pulse-Start Metal Halide<br />
200 Watt<br />
FOOTNOTES:<br />
1- For international voltages, consult factory.<br />
2- MT – Multi Tap consists of 120V, 208V, 240V <strong>and</strong> 277V <strong>and</strong> is prepared for <strong>high</strong>est voltage. Alternate<br />
voltages will require field adjustment.<br />
Lens<br />
PG – High Impact<br />
LP – Low Profile<br />
Line<br />
Voltage 1<br />
480<br />
MT – Multi Tap 2<br />
TT - Tri Tap 3<br />
Luminaire<br />
Finish<br />
WHT - White<br />
Options<br />
LL – Less Lamp<br />
3- TT – Tri-Tap consists of 120V, 277V <strong>and</strong> 347V <strong>and</strong> is shipped st<strong>and</strong>ard for Canadian applications <strong>and</strong><br />
is prepared for <strong>high</strong>est voltage. Alternate voltages will require field adjustment.<br />
<strong>LSI</strong> OUTDOOR LIGHTING<br />
AREA<br />
ACCESSORY ORDERING INFORMATION<br />
Description<br />
Ground Lamp Changer<br />
250, 320, 400 (reduced) Watt<br />
200 Watt<br />
Internal Cutoff Shield (use with PG lens only)<br />
Soft Light Diffuser (use with PG lens only)<br />
(Accessories are field installed)<br />
Order Number<br />
132678A<br />
179101Z<br />
131195<br />
141257<br />
Soft Light Diffuser<br />
Internal Cutoff Shield<br />
(For use with High Impact Lens)<br />
08/07/09<br />
© 2009<br />
<strong>LSI</strong> INDUSTRIES INC.<br />
Project Name<br />
Catalog #<br />
Fixture Type