The Product Catalog of Bolting Tool Technology - TorcUP USA

The
Product Catalog
of
Bolting Tool Technology

Since 1996…
There is something about the spirit of the people that make up TorcUP. It’s
a mindset that’s fiercely competitive. Not so much with other companies
that produce bolting tools or supplies, but rather with an invention that, in
its simplest form, has not changed for 40 plus years!
Today our business competes in a world where miniscule measures of
weight and size can make a difference. The use of a higher grade alloy
here and the focused machining away of a gram there can be significant in
how a tool performs and lasts. Success and ingenuity at this level requires
starting every project with a blank sheet of paper where standards don’t
exist and copying is not an option.
Our products always look different in order to make them perform better
than the rest. You will find that the term conventional wisdom is not in our
vocabulary, and for good reason! Our spirits are not dead wood so why
should our tools be?
Our patented and trademarked customer service surpasses all others
no matter what industry we are compared to. Each and every customer
is never a number! Each and every customer is considered the only
customer! This attitude exists in every facet of our business.
We like to think that our battle to achieve perfection can make a difference.
When executed correctly, we sell more tools to new customers every year
than any other company. And that is better for everybody involved.
These are the things we fight for . . . and it’s a good fight!
INSIDE…
TU Ultra Series Square Drive Hydraulic Wrenches
TU Series Accessories and data
TX Series Low Profile Hydraulic Wrenches
TX Series Accessories and data
RP Raptor Series Hi-Speed Pneumatic Wrench
RP Series Accessories and data
TBW Series BackUP Wrenches
Regards,
John Kovacs — President
EP/AP Series Hydraulic Pumps
ep/ap Series data
Industrial Impact Sockets
Bolt Tensioning Systems
w w w . t o r c u p . c o m

TU ULTRA FEATURES
1 Patented Mono-Body Housing
A TorcUP exclusive!
2 Balanced Drive Rod
Side load-free piston movement
3 Multi Tooth – Drive Segment
Ensures up to 27 degree torque stroke
4 Anti-Back Lash Mechanism
Provides hands free operation
5 Laser Engraved Torque Chart
No more searching for charts
6 Multi-Tooth Ratchet
Strong Vascomax teeth provide strength,
accuracy and 27 degree torque stroke
7 One Piece Drive Plate
One piece Vascomax drive plate
provides longer life durability
8 Push-Through Drive
Simply push to switch from loosen to tighten
9 Single Seal Piston
Assures extended maintenance free operation
10 Direct Housing Reaction
Allows use of tool without reaction arm
11 Steel Reaction Boot
Field replaceable feature protects
reaction arm
12 Long Length Reaction Arm
Allows for reaction on all applications
13 Reaction Arm Release Button
Protected within reaction arm housing
14 360˚ x 360˚ Swivel
Allows hose to be cleared on all applications
15 No Drip Quick Connect Couplers
Assures easy and safe operation
16 Steel Alloy Piston
Robust composition allows for longer
operation cycle
U.S. Patent No. 6,223,836
MADE IN THE USA
w w w . t o r c u p . c o m

TU ULTRA Series Accessories
Extended Reaction Tube
TU-2 ATU-2-03-ERT
TU-3 ATU-3-03-ERT
TU-7 ATU-7-03-ERT
TU-11 ATU-11-03-ERT
TU-20 ATU-20-03-ERT
TU-27 ATU-27-03-ERT
Consult factory for other
accessory part numbers
Extended Reaction Boot
25mm/1 inch:
TU-2 ATU-2-03-EXT1
TU-3 ATU-3-03-EXT1
TU-7 ATU-7-03-EXT1
TU-11 ATU-11-03-EXT1
Technical and Dimensional Data Imperial / Metric
Technical Data
SQUARE DRIVE
MIN TORQUE (ft/lbs)
MAX TORQUE (ft/lbs)
MIN TORQUE (Nm)
MAX TORQUE (Nm)
OUTPUT ACCURACY
REPEATABILITY
DUTY CYCLE
TOOL WEIGHT (lbs)
TOOL WEIGHT (kg)
TU-2
3/4”
127
1270
172
1722
+/- 3%
100%
100%
3.9
1.7
TU-3
1”
330
3330
447
4514
+/- 3%
100%
100%
9
4.1
TU-7
1 1/2”
740
7400
1003
10031
+/- 3%
100%
100%
19
8.6
TU-11
1 1/2”
1100
11010
1491
14925
+/- 3%
100%
100%
29
13.1
TU-20
2 1/2”
1940
20625
2630
27964
+/- 3%
100%
100%
61
27.6
TU-27
2 1/2”
2720
27200
3687
36872
+/- 3%
100%
100%
70
31.7
TU-60
2 1/2”
5800
58000
7862
78625
+/- 3%
100%
100%
130
59.8
51mm/2 inches:
TU-2 ATU-2-03-EXT2
TU-3 ATU-3-03-EXT2
TU-7 ATU-7-03-EXT2
TU-11 ATU-11-03-EXT2
76mm/3 inches:
TU-2 ATU-2-03-EXT3
TU-3 ATU-3-03-EXT3
TU-7 ATU-7-03-EXT3
TU-11 ATU-11-03-EXT3
Dimensional Data
TU-2
TU-3
TU-7
TU-11
TU-20
TU-27
TU-60
HEIGHT (in mm)
4.20
106.7
5.30
134.6
7.14
181.4
7.81
198.4
9.22
234.3
10.19
258.8
11.50
292.1
LENGTH 1 (in mm)
4.82
122.4
6.20
157.5
8.45
214.6
9.25
235.0
9.44
239.7
12.32
321.9
15.38
390.7
LENGTH 2 (in mm)
6.34
161.0
8.20
208.3
11.19
284.2
12.25
311.2
16.09
408.7
16.33
414.8
20.40 518.2
RADIUS (in mm)
0.98
24.9
1.29
32.8
1.75
44.5
1.91
48.5
2.31
58.7
2.46
62.5
3.10
78.7
WIDTH 1 (in mm)
2.00
50.8
2.63
66.8
3.61
91.7
3.95
100.3
4.86
123.4
5.26
133.6
6.58
167.1
WIDTH 2 (in mm)
2.79
70.9
3.68
93.5
5.06
128.5
5.43
137.9
7.15
181.6
7.57
192.3
8.89
225.8
WIDTH 3 (in mm)
4.42
112.3
5.81
147.6
7.98
202.7
8.72
221.5
10.88
276.4
11.63
295.4
14.29
363.0
Case available with
TU-2, 3, 7, 11 tools

TX SERIES FEATURES
1 Patented “Peanut-Shaped” Cylinder
Fit both the cylinder and link in confined areas
2 Engagement Rod
Automatically engages link on the first stroke
3 Never-Lock Drive Pawl
Ensures tool will NEVER lock on
4 Multi-Tooth Ratchet
Allows for 27˚ torque stroke accuracy
5 One Piece Drive Plate
Robust alloy provides for small nose radius
6 Link Pin
One pin for link to cylinder engagement,
no tools required
7 In-Line Reaction Pad
Assures torsion free reaction every time
8 Steel Alignment Pin
Assures equal load displacement
between side plates
9 Completely Flat Design
Cylinder and link width are
equal for tight fits
10 360˚ x 360˚ Swivel
Allows hose to be cleared
on all applications
11 Proprietary Piston Seal
Patented technology provides
years of maintenance free use
12 Slider
Prevents wear of piston or drive plate
Reduces costly repairs
U.S. Patent No. 6,223,836
MADE IN THE USA
w w w . t o r c u p . c o m

TX Series Accessories
Technical and Dimensional Data
Imperial / Metric
Inline Extension Arm
TX-1 TX-1-EXT
TX-2 TX-2-EXT
Technical Data
MIN TORQUE (Ft/lbs)
TX-1
45
TX-2
192
TX-4
395
TX-8
830
TX-16
1560
TX-32
3220
TX-45
4850
TX-4 TX-4-EXT
TX-8 TX-8-EXT
TX-16 TX-16-EXT
TX-32 TX-32-EXT
TX-45 TX-45-EXT
MAX TORQUE (Ft/lbs)
MIN TORQUE (Nm)
MAX TORQUE (Nm)
OUTPUT ACCURACY
560
61
759
+/- 3%
1928
260
2614
+/- 3%
3950
535
5355
+/- 3%
8630
1125
11699
+/- 3%
16600
2115
22503
+/- 3%
35650
4365
48327
+/- 3%
47380
6575
64228
+/- 3%
Low Point Reaction Paddle
TX-1 TX-1RP
TX-2 TX-2RP
REPEATABILITY
DUTY CYCLE
CORROSION PROTECTION
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
TX-4 TX-4RP
TX-8 TX-8RP
TX-16 TX-16RP
TX-32 TX-32RP
CYLINDER WEIGHT(lbs kg))
LINK WEIGHT FROM (lbs kg)
LINK WEIGHT TO (lbs kg)
1
1
1
0.45
0.45
0.45
3.50
2.40
3.50
1.50
1.00
1.50
6.00
5.40
7.60
2.70
2.40
3.40
11.70
11.90
14.50
5.00
5.50
6.50
16.00
21.00
28.00
7.30
9.50
13.00
26.00
29.00
39.50
11.50
13.00
17.90
29.00 13.00
29.00 13.00
39.50 17.90
TX-45 TX-45RP
Hex To Square Drive Adaptor
TX-1 AHS1-###-#
TX-2 AHS2-###-#
TX-4 AHS4-###-#
TX-8 AHS8-###-#
TX-16 AHS16-###-#
TX-32 AHS32-###-#
Hex Reducer
TX-1 AHR1-###-###
TX-2 AHR2-###-###
TX-4 AHR4-###-###
TX-8 AHR8-###-###
TX-16 AHR16-###-###
TX-32 AHR32-###-###
Dimensional Data
TX-1
TX-2
TX-4
TX-8
TX-16
TX-32
TX-45
LENGTH (in mm)
4.37
111.0
6.45
163.8
7.87
199.9
10.20
259.1
12.93
328.4
15.80
401.3
16.75
425.5
HEIGHT (in mm)
3.25
82.6
4.00
101.6
5.60
142.2
7.00
177.8
7.58
192.5
9.50
241.3
10.28
261.1
WIDTH (in mm)
0.78
19.8
1.25
31.8
1.63
41.4
2.05
52.1
2.50
63.5
3.24
82.3
4.88
124.0
Case available with
TX-2, 4, 8 tools
RADIUS (in mm)
0.23
5.8
0.36
9.1
0.46
11.7
0.54
13.7
0.65
16.5
0.93
23.6
0.93
23.6

TX Series Low Profile Hex Link Part Numbers
TX-1 Link
Part #
Hex Size
Imperial Metric
TX-1RL008 1/2"
TX-1RL13M
13mm
TX-1RL009 9/16"
TX-1RL14M
14mm
TX-1RL010 5/8"
TX-1RL15M
15mm
TX-1RL17M
17mm
TX-1RL011 11/16"
TX-1RL012M19 3/4" 19mm
TX-1RL013 13/16"
TX-1RL21M
21mm
TX-1RL014M22 7/8" 22mm
TX-1RL015 15/16"
TX-1RL24M
24mm
TX-1RL100 1"
TX-1RL101M27 1-1/16" 27mm
TX-1RL102 1-1/8"
TX-1RL103M30 1-3/16" 30mm
TX-1RL104 1-1/4"
TX-1RL32M
32mm
TX-1RL105 1-5/16"
TX-1RL106M35 1-3/8" 35mm
TX-1RL36M
36mm
TX-1RL107 1-7/16"
TX-1RL108M38 1-1/2" 38mm
TX-1RL109 1-9/16"
TX-1RL110M41 1-5/8" 41mm
TX-4 Link Hex Size
Part #
Imperial Metric
TX-4RL100 1"
TX-4RL101M19 1-1/16" 27mm
TX-4RL102 1-1/8"
TX-4RL103M30 1-3/16" 30mm
TX-4RL104 1-1/4"
TX-4RL32M
32mm
TX-4RL105 1-5/16"
TX-4RL106 1-3/8"
TX-4RL36M
36mm
TX-4RL107 1-7/16"
TX-4RL108M38 1-1/2" 38mm
TX-4RL109 1-9/16"
TX-4RL110 1-5/8" 41mm
TX-4RL111 1-11/16"
TX-4RL112 1-3/4"
TX-4RL113 1-13/16" 46mm
TX-4RL114 1-7/8"
TX-4RL115M49 1-15/16" 49mm
TX-4RL50M
50mm
TX-4RL200 2"
TX-4RL201 2-1/16"
TX-4RL202 2-1/8"
TX-4RL203M55 2-3/16" 55mm
TX-4RL204 2-1/4"
TX-4RL205 2-5/16"
TX-4RL206M60 2-3/8" 60mm
TX-4RL207 2-7/16"
TX-4RL208 2-1/2"
TX-4RL209M65 2-9/16" 65mm
TX-4RL210 2-5/8"
TX-4RL211 2-11/16"
TX-4RL212M70 2-3/4" 70mm
TX-4RL213 2-13/16"
TX-4RL214 2-7/8"
TX-4RL215M75 2-15/16" 75mm
TX-4RL300 3"
TX-4RL301 3-1/16"
TX-4RL302 3-1/8"
TX-4RL80M
80mm
TX-2 Link Hex Size
Part # Imperial Metric
TX-2RL012M19 3/ 4" 19mm
TX-2RL013 13/16"
TX-2RL014M22 7/8" 22mm
TX-2RL015 15/16"
TX-2RL24M
24mm
TX-2RL100 1"
TX-2RL101M27 1-1/16" 27mm
TX-2RL102 1-1/8"
TX-2RL103M30 1-3/16" 30mm
TX-2RL104 1-1/4"
TX-2RL105 1-5/16"
TX-2RL106M35 1-3/8" 35mm
TX-2RL36M
36mm
TX-2RL107 1-7/16"
TX-2RL108M38 1-1/2" 38mm
TX-2RL109 1-9/16"
TX-2RL110M41 1-5/8" 41mm
TX-2RL111 1-11/16"
TX-2RL112 1-3/4"
TX-2RL113M46 1-13/16" 46mm
TX-2RL114 1-7/8"
TX-2RL115M49 1-15/16" 49mm
TX-2RL50M
50mm
TX-2RL200 2"
TX-2RL201 2-1/16"
TX-2RL202 2-1/8"
TX-2RL203M55 2-3/16" 55mm
TX-2RL204 2-1/4"
TX-2RL205 2-5/16"
TX-2RL206M60 2-3/8" 60mm
TX-2RL207 2-7/16"
TX-2RL208 2-1/2"
TX-2RL209M65 2-9/16" 65mm
TX-8 Link Hex Size
Part #
Imperial Metric
TX-8RL114 1-7/8"
TX-8RL115M49 1-15/16" 49mm
TX-8RL50M
50mm
TX-8RL200 2"
TX-8RL201 2-1/16"
TX-8RL202 2-1/8"
TX-8RL203M55 2-3/16" 55mm
TX-8RL204 2-1/4"
TX-8RL205 2-5/16"
TX-8RL206M60 2-3/8" 60mm
TX-8RL207 2-7/16"
TX-8RL208 2-1/2"
TX-8RL209M65 2-9/16" 65mm
TX-8RL210 2-5/8"
TX-8RL211 2-11/16"
TX-8RL212M70 2-3/4" 70mm
TX-8RL213 2-13/16"
TX-8RL214 2-7/8"
TX-8RL215M75 2-15/16" 75mm
TX-8RL300 3"
TX-8RL301 3-1/16"
TX-8RL302 3-1/8"
TX-8RL80M
80mm
TX-8RL303 3-3/16"
TX-8RL304 3-1/4"
TX-8RL305 3-5/16"
TX-8RL85M
85mm
TX-8RL306 3-3/8"
TX-8RL307 3-7/16"
TX-8RL308 3-1/2"
TX-8RL90M
90mm
TX-8RL309 3-9/16"
TX-8RL310 3-5/8"
TX-8RL311 3-11/16"
TX-8RL312M95 3-3/4" 95mm
TX-8RL313 3-13/16"
TX-8RL314 3-7/8"
TX-8RL315M100 3-15/16" 100mm
TX-8RL400 4"
TX-8RL401 4-1/16"
TX-8RL402M105 4-1/8" 105mm
TX-16 Link Hex Size
Part # Imperial Metric
TX-16RL203M55 2-3/16" 55mm
TX-16RL204 2-1/4"
TX-16RL205 2-5/16"
TX-16RL206M60 2-3/8" 60mm
TX-16RL207 2-7/16"
TX-16RL208 2-1/2"
TX-16RL209M65 2-9/16" 65mm
TX-16RL210 2-5/8"
TX-16RL211 2-11/16"
TX-16RL212M70 2-3/4" 70mm
TX-16RL213 2-13/16"
TX-16RL214 2-7/8"
TX-16RL215M75 2-15/16" 75mm
TX-16RL300 3"
TX-16RL301 3-1/16"
TX-16RL302 3-1/8"
TX-16RL80M
80mm
TX-16RL303 3-3/16"
TX-16RL304 3-1/4"
TX-16RL305 3-5/16"
TX-16RL85M
85mm
TX-16RL306 3-3/8"
TX-16RL307 3-7/16"
TX-16RL308 3-1/2"
TX-16RL90M
90mm
TX-16RL309 3-9/16"
TX-16RL310 3-5/8"
TX-16RL311 3-11/16"
TX-16RL312M95 3-3/4" 95mm
TX-16RL313 3-13/16"
TX-16RL314 3-7/8"
TX-16RL315M100 3-15/16" 100mm
TX-16RL400 4"
TX-16RL401 4-1/6"
TX-16RL402M105 4-1/8" 105mm
TX-16RL403 4-3/16"
TX-16RL404 4-1/4"
TX-16RL405 4-5/16"
TX-16RL110M
110mm
TX-16RL406 4-3/8"
TX-16RL407 4-7/16"
TX-16RL408 4-1/2"
TX-16RL115M
115mm
TX-16RL409 4-9/16"
TX-16RL410 4-5/8"
TX-16RL120M
120mm
TX-16RL411 4-11/16"
TX-16RL412 4-3/4"
TX-16RL413 4-13/16"
TX-16RL414 4-7/8"
TX-16RL125M
125mm
TX-16RL415 4-15/16"
TX-16RL500 5"
TX-16RL501 5-1/16"
TX-16RL502M130 5-1/8" 130mm
TX-16RL503 5-3/16"
TX-16RL504 5-1/4"
TX-16RL505M135 5-5/16" 135mm
TX-32 Link Hex Size
Part #
Imperial Metric
TX-32RL302 3-1/8"
TX-32RL80M
80mm
TX-32RL303 3-3/16"
TX-32RL304 3-1/4"
TX-32RL305 3-5/16"
TX-32RL85M
85mm
TX-32RL306 3-3/8"
TX-32RL307 3-7/16"
TX-32RL308 3-1/2"
TX-32RL90M
90mm
TX-32RL309 3-9/16"
TX-32RL310 3-5/8"
TX-32RL311 3-11/16"
TX-32RL312M95 3-3/4" 95mm
TX-32RL313 3-13/16"
TX-32RL314 3-7/8"
TX-32 Link (continued) Hex Size
Part #
Imperial Metric
TX-32RL315M100 3-15/16" 100mm
TX-32RL400 4"
TX-32RL401 4-1/16"
TX-32RL402M105 4-1/8" 105mm
TX-32RL403 4-3/16"
TX-32RL404 4-1/4"
TX-32RL405 4-5/16"
TX-32RL110M
110mm
TX-32RL406 4-3/8"
TX-32RL407 4-7/16"
TX-32RL408 4-1/2"
TX-32RL115M
115mm
TX-32RL409 4-9/16"
TX-32RL410 4-5/8"
TX-32RL411 4-11/16"
TX-32RL120M
120mm
TX-32RL412 4-3/4"
TX-32RL413 4-13/16"
TX-32RL414 4-7/8"
TX-32RL125M
125mm
TX-32RL415 4-15/16"
TX-32RL500 5"
TX-32RL501 5-1/16"
TX-32RL502M130 5-1/8" 130mm
TX-32RL503 5-3/16"
TX-32RL504 5-1/4"
TX-32RL505M135 5-5/16" 135mm
TX-32RL506 5-3/8"
TX-32RL507 5-7/16"
TX-32RL508M140 5-1/2" 140mm
TX-32RL509 5-9/16"
TX-32RL510 5-5/8"
TX-32RL511 5-11/16"
TX-32RL145M
145mm
TX-32RL512 5-3/4"
TX-32RL513 5-13/16"
TX-32RL514 5-7/8"
TX-32RL150M
150mm
TX-32RL515 5-15/16"
TX-32RL600 6"
TX-32RL601 6-1/16"
TX-32RL155M
155mm
TX-32RL602 6-1/8"
TX-32RL603 6-3/16"
TX-32RL604 6-1/4"
TX-32RL160M
160MM
TX-32RL605 6-5/16"
TX-32RL606 6-3/8"
TX-32RL607 6-7/16"
TX-32RL608M165 6-1/2" 165mm
TX-32RL609 6-9/16"
TX-32RL610 6-5/8"
TX-32RL611M170 6-11/16" 170mm
TX-32RL612 6-3/4"
TX-32RL613 6-13/16"
TX-32RL614 6-7/8"
TX-32RL175M
175mm
TX-32RL615 6-15/16"
TX-32RL700 7"
TX-32RL701 7-1/16"
TX-32RL180M
180mm
TX-32RL702 7-1/8"
TX-32RL703 7-3/16"
TX-32RL704 7-1/4"
TX-32RL185M
185mm
TX-32RL705 7-5/16"
TX-32RL706 7-3/8"
TX-32RL707 7-7/16"
TX-32RL190M
190mm
TX-32RL708 7-1/2"
TX-32RL709 7-9/16"
TX-32RL710 7-5/8"
TX-32RL711M195 7-11/16" 195mm
TX-32RL712 7-3/4"
TX-32RL713 7-13/16"
TX-32RL714M200 7-7/8" 200mm
TBW SERIES FEATURES
1 The Only Backup You Need
The TorcUP TBW Series BackUP Wrench
eliminates the need for striker wrenches,
shims and vice grip style backup wrenches
2 Industrial Construction
Its heavy duty industrial construction
is ergonomic and safe
3 Totally Mechanical
The TBW Series backup wrench is totally
mechanical and has no hydraulics
4 Ergonomic Design
Easy to release design

RAPTOR SERIES FEATURES
1 Hardened Alloy Steel
For durability and long cycle life
2 Bearings Support
For loads experienced at the square drive
3 Multiple Stage Planetary Gear System
With optimized tooth design
4 Smooth Ball Bearing Rotation
Gearbox housing independent from the
motor handle
5 Lightweight Aluminum Handle
Provides durable, slip-resistant textured coating
6 Ultra-Efficient Air Motor
Designed for easy maintenance
7 Cartridge-Style Valves
Allow easy replacement
8 One Finger Trigger Control
For forward and reverse
9 O-Rings
Seal grease in while keeping water and dirt out
10 Thrust Bearings
Isolate the motor when used in all orientations
11 Bearing Sleeves
Low friction, high strength that gears run on
12 Chrome Steel Pins
In each gear stage
MADE IN THE USA
w w w . t o r c u p . c o m

RP Series Accessories
Technical and Dimensional Data Imperial / Metric
RP 500 & 1000 Weld Blank
RPA-05.10-WD
RP 2000 & 3000 Weld Blank
RPA-20.30-WD
RP 500 & 1000 Straight Reaction Arm
RPA-05.10-SARM
RP 2000 & 3000 Straight Reaction Arm
RPA-20.30-SARM
RP 6000 Straight Reaction Arm
RPA-60-SARM
Technical Data
SQUARE DRIVE
MIN TORQUE (Ft/lbs)
MAX TORQUE (Ft/lbs)
MIN TORQUE (Nm)
MAX TORQUE (Nm)
Performance (RPM)
RP-500
3/4”
120
500
162
677
45
RP-1000
3/4”
250
1000
338
1355
25
RP-2000
1”
450
2000
610
2711
20
RP-3000
1”
740
3000
1003
4067
5
RP-6000
1 1/2”
1000
6000
1356
8134
2.5
RP 500 & 1000 Extended Reaction Arm
RPA-05.10-LARM
RP 2000 & 3000 Extended Reaction Arm
RPA-20.30-LARM
RP 6000 Extended Reaction Arm
RPA-60-LARM
RP 500 & 1000 Standard Reaction Arm
RPA-05.10-RARM
RP 2000 & 3000 Standard Reaction Arm
RPA-20.30-RARM
RP 6000 Standard Reaction Arm
RPA-60-RARM
RP 500 & 1000 Slider Arm
RPA-05.10-SLA
RP 2000 & 3000 Slider Arm
RPA-20.30-SLA
RP 6000 Slider Arm
RPA-60-SLA
RP 2000 & 3000 Claw Foot Reaction Arm
RPA-20.30-CFRA
RP 6000 Claw Foot Reaction Arm
RPA-60-CFRA
Custom
Custom Reaction Arms Available
Filter/Regulater/Lubricator
RP-FRL
Dimensional Data
RP-500
RP-1000
RP-2000
RP-3000
RP-6000
Height A (in mm)
7.86
199.65
7.86
199.65
7.86
199.65
7.89
200.41
8.16
207.26
Square Drive B (in mm)
0.75
19.05
0.75
19.05
1.00
25.40
1.00
25.40
1.50
38.10
Length C (in mm)
6.82
170.5
7.78
197.62
8.35
211.33
9.99
253.75
12.35
313.69
Diameter D (in mm)
2.56
65.03
2.62
66.55
2.85
72.39
3.44
87.38
4.00
101.60
Case available with
all RP tools
Weight (lbs kg)
9 4
10
*Max air consumption is 40 CFM @ 90 psi full torque.
4.5
12
5.4
16
7.3
20
9.07

EP SERIES FEATURES
AP SERIES FEATURES
1 High Output 2 Stage Pumps
2 Advanced Circuit Technology
Fewer components and wiring reduce
weight & increases dependability
3 Powerful, Efficient, Compact
4 Lightweight Motor
Permanent Magnet Motor is available in
1.125 HP and 1.5 HP versions
5 Operates At Full Pressure
On a 20 amp @115 VAC circuit, makes the
pump ideal to use with an extension cord
6 Low Profile Design Simplifies Transport
Site gauge enables operator to monitor
reservoir oil levels. Powder coated reservoirs
stand up to the harshest environments.
“Easy-Pour” fill and drain hole makes
preventative maintenance quick and easy.
7 Enhanced Reservoirs
Available in 1 and 1.5 Gallons
8 Quadra-Torc Function
Available in single and multi-port designs
for running multiple tools simultaneously
9 Lightweight, Ergonomic Pendant
Industrial ergonomic rocker switches easy to
activate, reducing hand fatigue. Water resistant
sealed switches operate on 12 VCD.
10 Roll Cage & Heat Exchangers Available
11 Auto–Dump
Relieves all pressure from hoses
12 Replaceable Motor Brushes & Armature
Increases serviceability
13 10’ Pendant Standard
On all Torque Powerpump models
1 Heavy Duty Air Motor
Powerful 4 HP industrial duty air motor
runs on 50cfm /100 PSI
2 High Output 2 Stage Pumps
3 Quadra-Torc Function (Optional)
Available in single and multi-port designs
for running multiple tools simutaneously
4 Quiet Operation
Approximately 80dB @ 10,000 PSI
5 Rugged Remote
10’ remote pendant to control motor and valve
6 Auto-Dump
Relieves all pressure from hoses
7 Filter-Lubricator
Supplied with high flow F/R/L for long
trouble free operation
8 1.5 Gallon Reservoir
9 Precise PSI/BAR 4” Pressure Gauge
10 Quick Connect Couplers
Each pump and hose is fitted with quick
connect, no-drip, threadless safety couplers,
with 2:1 safety ratio
11 Supplied with dual non-conductive
High pressure hose with couplers
12 Standard carrying handle provided
Optional roll cage available to protect motor
13 Low Center of Gravity
For more stability
14 For Use In Flammable Environments
15 Servicable Motor Vanes & Springs
MADE IN THE USA
w w w . t o r c u p . c o m

EP & AP Series Accessories
Technical and Dimensional Data Imperial / Metric
Quad Port Manifold
Multi tool operation / application
Hose
Up to 50’ in stock.
Custom sizes available
Pump Handle
Ergonomic carrying lifting handle
for that added lift
Heat Exchanger
Prevents heat build up
C
Usable Reservoir Capactior
gal. litre 1.5 5.7
A (in mm)
B (in mm)
C (in mm)
D (in. mm)
15.13
8.75
19
5.96
384.3
222.3
482.6
151.4
Wheeled Caster
Ultimate in pump mobility
Screw Type Couplers
D
EP 1000
Adaptable standards
Quick Connect Couplers
Standard equipment / plug & play
Gauge
Accurate 4” pressure gauge. PSI/ BAR UNITS
B
Technical Data
Reservoir capacity (gal litre)
EP500*
1 3.8
EP500-230V*
1 3.8
EP1000*
1.5 5.7
A
EP1000-230V*
1.5 5.7
EP1000-Q*
1.5 9.5
EP1000-Q-230V*
1.5 9.5
Tool Kit
Heavy duty textured aluminum exterior laminate
Storage and Shipping Case with recessed handles
Valve Style
Motor Specification
Auto Retract
1.125 HP @ 115VAC
Single Phase
Auto Retract
1.125 HP @ 230VAC
Single Phase
Auto Retract
1.5 HP @ 115VAC
Single Phase
Auto Retract
1.5 HP @ 115VAC
Single Phase
Auto Retract
1.5 HP @ 115VAC
Single Phase
Auto Retract
1.5 HP @ 230VAC
Single Phase
and latches, steel braces and custom foam interior.
Flow Rate
700 cu.in./min. @ 1,100 psi
46 cu.in./min.@ 10,000 psi
9.1 litres/min. @ 75 bar
0.75/min. @ 700 bar
700 cu.in./min. @ 1,100 psi
55 cu.in./min.@10,000 psi
9.4 litres/min. @ 75 bar
0.9/min. @ 700 bar
700 cu.in./min. @ 1,100 psi
55 cu.in./min.@ 10,000 psi
9.4 litres/min. @ 75 bar
0.9/min. @ 700 bar
Photographs are not to scale.
Weight (lbs Kg)
49.5 22.46
49.5 22.46
63.75 28.92
63.75 28.92
66.25 30.06
66.25 30.06
Amps
12-13
12-13
17-18
17-18
17-18
17-18
*Pendant: Motor/Solenoid Control
Valve – Model: Torque, Function: Advance/Retract
C
Technical Data
Reservoir capacity (gal litre)
Valve Style
Motor Specification
Flow Rate
AP1000
1 5.7
Auto Retract
6 HP @ 90 psi/ 50cfm
700 cu. in./min. @ 1,100 psi
55 cu. in./min. @10,000 psi
D
AP 1000
Weight (lbs Kg)
63.75 28.92
Case available with
all EP & AP pumps
and tool sets
B
A
*Pendant: Motor/Solenoid Control
Valve – Model: Torque, Function: Advance/Retract

TSK SERIES FEATURES
1 Unbelievable Strength
All TorcUP Industrial Impact Sockets are
made from high strength alloy steel, heat
treated for the best combination of strength,
and impact resistance
2 Our Sockets Do What Others Claim
With optimum wall thickness, TorcUP sockets
have the strength to withstand the necessary
torque and the access to reach the most
restricted of nuts
3 Accommodating Design
The depth of the hex openings are designed
to accommodate the nut for full engagement
4 Free Corner Design
TorcUP’s entire line of Industrial Impact
Sockets feature free corner design for
flats above 5/8” (17mm)
The TorcUP line of Industrial Sockets feature free corner
design for flats above 5/8” (17mm). All TorcUP Industrial
Impact Sockets are made from high strength alloy steel,
heat treated for the best combination of strength and
impact resistance. With optimum wall thickness, TorcUP
sockets have the strength to withstand the necessary
torque and the access to reach the most restricted
of nuts. The depth of the hex openings are designed to
accommodate the nut, for full engagement.
5 Safe Attachment Design
O-ring and drive pin included with every
socket for safe square drive attachment
6 3/4” Drive
Imperial (1/2”-2 3/8”) and Metric (17mm-60mm)
Available in 6 point Standard, 6 Point Deep, 6
Point Thinwall, 12 Point Configurations, as well
as Hex Driver Sockets, Extensions and Adaptors
7 1” Drive
Imperial (3/4”-4 1/2”) and Metric (19mm-115mm)
Available in 6 Point Standard, 6 Point Deep, 6
Point Thinwall, 6 Point Deep Thinwall, and 12
Point Configurations as well as Hex Driver
Sockets, Extensions and Adaptors
8 1 1/2” Drive
Imperial (1 3/8”-5 1/8”) and Metric (32mm-130mm)
Available in 6 Point Standard, 6 Point Deep,
and 12 Point Configurations, as well as
Extensions and Adaptors
9 2 1/2” Drive
Imperial (1 5/8”-9 1/4”) and Metric (43mm-225mm)
Available in 6 Point Standard and 6 Point
Deep Confirgurations, as well as Extensions
and Adaptors
w w w . t o r c u p . c o m

Out and about in front of customers is
where Jim Bullen conducts his finest work.
His home is the road and his business associates are
the more than 30 Domestic Sales Representatives that
TorcUP has positioned throughout the United States
of America. Sunday night puts him on a plane bound
for a Windfarm in California and by Friday night he has
set foot in three states and criss-crossed more than
3,000 miles! This is the Road Warrior dedication of the
Domestic Sales Manager of the fastest growing network
of field sales representatives in the USA.
There is no telling how many miles he will
have to fly to build a worldwide network.
But he has the airline miles to prove he is out there
making it happen! He thinks like a man of action and acts
like a man of thought. This is how he builds an ever
growing force of International Partners on each
continent, always bringing fresh ideas and keen direction
to an ever changing worldwide market and climate.
Whether opening new opportunities in South America
or enhancing brand awareness throughout Europe, Eric
has the ability to cross any ocean with his courage to lose
sight of the shore, without losing sight of his goals.
Jim Bullen Jr. - National Sales Manager
Eric Sement - International Sales Manager
w w w . t o r c u p . c o m

THT Series FEATURES
1 Topside Tensioners
The THT range of bolt tensioning tools are
some of the most compact and reliable bolt
tensioners available today. The tools have
been designed to fit on most ANSI–API–
MSS Pipeline flanges and consist of only 6
base tools to cover bolt sizes from 3/4”
through to 4.”
2 Subsea Tensioners
A specially designed range of bolt
tensioning equipment to suit the demanding
requirements of divers operating in harsh
sub sea environments. The range of
tensioners are manufactured from high
strength stainless steel to minimize
maintenance. TorcUP subsea bolt tensioning
tools have been used in the UK North sea
since 1991 and have a proven reliability and
safety record.
3 Hydraulic Nuts
TorcUP Hydraulic Nuts replace existing
hexagon nuts to give a rapid, accurate and
uniform bolt load to any bolted joint.
Hydraulic Nuts offer a method of bolt
tensioning multi-bolt applications which
greatly improves the integrity of the joint.
The speed at which joints can be tensioned
and detensioned shows extraordinary
time saving over conventional detachable
bolt tensioning system.
4 Wind Tensioners
A range of bolt tensioning tools suitable
for a complete wind turbine bolting
installation or maintenance program
on many different types and models of wind
turbines. By listening to customer
feedback, these rich, powerful
bolt tensioning tools are packed full of
operator requested features including quick
release swivel fittings, automatic piston
return and intuitive operation.
Consult Factory or www.torcup.com for detailed
product information and catalogs.
w w w . t o r c u p . c o m

1) Bolting and maintenance on the Golden Gate Bridge 2) TorcUP Exhibiting at the Hannover Fair 3) Repair Shop in Australia 4) Wind Mill Erection in the U.S.
5) TorcUP Top Sellers at the Puerto Rico Sales Meeting 6) Russian Refinery 7) Equipment Manufacturer in Norway 8) Ship Propeller Bolted with TU-11
9) Big TU-60 Used in Russia 10) Crane Manufacturer in China 11) Windmill Erected Using TorcUP 12) Big TX-32 Working on Dragline
5)
1)
6)
2)
7)
3)
4)
9)
10)
11)
8)
12)
w w w . t o r c u p . c o m

Take everything that you have ever known to be
true about hydraulic bolting tools and Torc it UP.
More A CCURATE. More R EPEATABLE. More C ONSISTENT.
The TorcUP Comprehensive Factory Warranty
At TorcUP we are genuine.
Our people and our tools deliver what others claim
they can. We hide absolutely nothing from our
customers or our competitors.
We believe. From our humble beginnings in Easton,
Pennsylvania, our small group of employees built a
tool brand from scratch. The TorcUP brand is now
an established worldwide supplier to some of the
largest industries on every continent.
We have created the world’s
ultimate hydraulic bolting tools.
Our products are designed to
perform with less parts, in order
to gain less friction, and to decrease
the overall loss of power.
• The warranty does not cover improper
use or operation of tooling.
• If during the warranty period, the tooling
must be returned to the TorcUP Repair
Facility for warranty maintenance, the
customer will be provided with a loaner
unit at no charge for the duration of the repair.
We deliver uniqueness to our customers. We are certain
that customers all over the world will continue to
benefit from TorcUP, not only as their trusted tool brand,
but also as their tool supplier. TorcUP still creates
all of its tools in-house in Easton, PA. And each of
our tools still remain truly individual.
We provide ongoing support with operational
training and care of all tools, free repair of
warranty tools, and no-cost temporary
replacements. At TorcUP, we strive to become
your total product solution.
• The customer will be completely satisfied
with the performance, operation, support
and overall value of their TorcUP System.
• The customer’s staff will be thoroughly
trained to the customer’s satisfaction on
the proper operation and care of their
TorcUP System.
• If the TorcUP System should fail to operate
properly under normal usage within 13
months of purchase, the system will be
repaired at no charge.
• If the TorcUP System cannot be repaired
under warranty at the customer’s site,
TorcUP will furnish the customer with loaner
components as needed at no charge during
the warranty period.
The Warranty covers factory defects for
the following lengths of time dependent
upon the tooling purchased:
TU Ultra S e r i e s W r e n c h e s
-13 Months from Date of Purchase
T X S e r i e s W r e n c h e s
-13 Months from Date of Purchase
R P S e r i e s W r e n c h e s
-13 Months from Date of Purchase
EP and AP Series Pumps
-13 Months from Date of Purchase
Accessories
-13 Months from Date of Purchase
Sockets
-Lifetime *some exclusions
TorcUP. Like no other wrench. Like no other company.
w w w . t o r c u p . c o m

For Worldwide Sales & Service, call TorcUP at 888 TORCUP1
w w w . t o r c u p . c o m
TorcUP
Bolting Your World
Worldwide Headquarters
1025 Conroy Place
Easton, PA 18040
+1-610-250-5800
888-TORCUP-1
+1-610-250-2700
sales@torcup.com
Other Locations in:
Africa
Europe
Australia Middle East
Canada South America
C h i n a
South East Asia
Please call us for more information.
Made in the USA