18.02.2014 Views

Exocet Premium Heating Oil Additives - PEAK OIL

Exocet Premium Heating Oil Additives - PEAK OIL

Exocet Premium Heating Oil Additives - PEAK OIL

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>Exocet</strong> <strong>Premium</strong> <strong>Heating</strong> <strong>Oil</strong> <strong>Additives</strong><br />

Description<br />

Liquid, multi-component, premium heating oil additive with extensive field<br />

experience. These additives can be used to upgrade standard <strong>Heating</strong> <strong>Oil</strong> to<br />

premium products and achieve substantial additional margins. They contain a<br />

combination of components to help maintain quality, reduce fuel related service<br />

problems as well as enhancing performance.<br />

The additives are supplied in bottles with 200ml additive present and treat 1000<br />

litres of heating oil (1:5,000 treat rate). They are suitable for batch treatment in<br />

tanks (e.g. bottle dosing and splash blending). It is preferable to empty the<br />

additive into the storage tanks before adding heating oil on top (promotes<br />

mixing), however mixing will occur after a few days if added to an existing full<br />

tank.<br />

Typical <strong>Heating</strong> <strong>Oil</strong> System Problems<br />

Fuel Storage<br />

Pressure Jet Burner<br />

Vent<br />

Fuel Tank<br />

Fill<br />

Tiny Hole<br />

Deposits partially<br />

block nozzle, creating<br />

poor atomisation and<br />

decreasing efficiency<br />

Fuel<br />

High Pressure<br />

High Pressure Fuel <strong>Oil</strong><br />

Fine <strong>Oil</strong> Spray<br />

Water layer<br />

To Boiler<br />

Over time and/or heat<br />

e in fuel lines (e.g. summer) small oxidation<br />

ing flow deposits form in the fuel,<br />

Dirty System<br />

sink to the bottom and stick<br />

together to create sludge<br />

Clean System<br />

Nozzle<br />

Results of F21-61 Stability Test<br />

Results of F21 - 61 Accelerated Stability Test<br />

Low Pressure In<br />

Boiler Furnace<br />

Typical <strong>Heating</strong> <strong>Oil</strong><br />

(Untreated)<br />

<strong>Premium</strong><br />

<strong>Heating</strong> <strong>Oil</strong><br />

ion and pitting of<br />

l lines and tank<br />

Build-up of sludge in fuel lines<br />

and restricting flow<br />

Plugged fuel filters<br />

Dirty System<br />

<strong>Premium</strong> Anti - oxidants system inhibits the growth of deposits<br />

caused by fuel reacting with oxygen in the air.<br />

Clean System<br />

Foxwood Road<br />

Sheepbridge<br />

Chesterfield, S41 9RF<br />

Tel: 01246 450242<br />

www.peakoil.co.uk<br />

sales@peakoil.co.uk


<strong>Exocet</strong> <strong>Premium</strong> <strong>Heating</strong> <strong>Oil</strong> <strong>Additives</strong><br />

Protection Against Copper Degradation<br />

<strong>Premium</strong> Metal<br />

Deactivator is designed to<br />

reduce fuel degradation<br />

caused by the interaction<br />

with metals in the fuel<br />

system<br />

<strong>Heating</strong> <strong>Oil</strong> will darken<br />

and degrade over time,<br />

when in contact with the<br />

copper lines in heating oil<br />

systems<br />

Typical<br />

<strong>Heating</strong> <strong>Oil</strong><br />

(Untreated)<br />

<strong>Premium</strong><br />

<strong>Heating</strong><br />

<strong>Oil</strong><br />

<strong>Premium</strong> <strong>Heating</strong> <strong>Oil</strong><br />

avoids deposit & sludge<br />

Problems that occur in<br />

Boiler systems<br />

I have helped the<br />

environment by using<br />

P romotes a greater system<br />

operating efficiency =<br />

lower fuel consumption<br />

<strong>Premium</strong> <strong>Heating</strong><br />

<strong>Oil</strong><br />

Lower Carbon<br />

Emissions Cycle<br />

Less fuel<br />

Consumed = nearly<br />

nearly half a tonne<br />

less CO 2 emitted per<br />

house every year<br />

<strong>Premium</strong> <strong>Heating</strong> <strong>Oil</strong><br />

Lower CO 2 emissions<br />

means up to 18 fewer<br />

Existing trees can help trees/year are needed to<br />

absorb CO 2 from other sources absorb it<br />

and make our environment<br />

cleaner<br />

Foxwood Road<br />

Sheepbridge<br />

Chesterfield, S41 9RF<br />

Tel: 01246 450242<br />

www.peakoil.co.uk<br />

sales@peakoil.co.uk

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!