Konik Consumables Catalogue_redistribucion y capitulos 1 y 2 ...

2 · Ferrules, Fittings & Konik Instruments Kits

FERRULES, FITTINGS & KONIK INSTRUMENTS KITS 

FERRULES 

KONIK provides a wide range of ferrules made from Vespel ® , Vespel ® /Graphite, Graphite and PTFE. 

Ferrule sizes refer to the size of the ttings into which they t; they are not the diameter of the 

ferrule. 

For example, 1/16” ferrules are 1/8” diameter and t in 1/16” ttings. 

Vespel ® Ferrules - Sold in packages of 10 

KONIK Ferrules 

• Upper temperature limit: 350ºC 

• 100% high temperature DuPont polyimide 

• Precision-drilled ID; no imperfections from molding 

• One-piece design requires no back ferrules 

• Fairly hard; tends to seal permanently to the column 

Description 

Item No. 

Straight Ferrules - for tubing with ODs as listed 

1/16” Ferrules AUC212100 



Vespel ® Ferrules 

1/16” Vespel ® Ferrules: 

Blank, 0.5 mm ID, Straight 

Blank Ferrules - no holes 

1/16” Blank Ferrules AUC2121XX 



Capillary Column Ferrules For Capillary Sizes - ID 

1/16” to 0.3 mm 0.10 - 0.18 mm AUC212103 

1/16” to 0.4 mm 0.25 mm AUC212104 

1/16” to 0.5 mm 0.32 mm AUC212105 

1/16” to 0.8 mm 0.53 mm AUC212108 

1/16” to 1.0 mm 0.65 mm AUC212110 

1/16” to 1.2 mm 0.75 mm AUC212112 

1/16”, two-hole, 0.4 mm each 0.25 mm AUC212124 


Reducing Ferrules 

1/8” to 0.4 mm 0.25 mm AUC212204 

1/8” to 0.5 mm 0.32 mm AUC212205 

1/8” to 0.8 mm 0.53 mm AUC212208 


For Capillary Sizes - OD 

1/8” to 1/16” 1/16” AUC212210 

1/4” to 1/16” 1/16” AUC212410 

1/4” to 1/8” 1/8” AUC212420 

AUC212104, AUC212100, AUC212222 

Please note for all ferrules: 

• 0.4 mm ID ferrules t 0.25 mm ID capillary columns 



• Straight ferrules are used for packed columns 

Cap. 2: 2 

Konik-Tech


Graphite Ferrules - Sold in packages of 10; except as noted 


• High-purity Graphite; preferred for capillary GC use 

• Ideal for glass-to-metal connections; does not stick to glass 

• Precision formed; ash free ID 

• Reusable if not overtightened 

• One-piece design requires no back ferrule 

Description 

Item No. 

Straight Ferrules - for tubing with ODs listed 





1/2” Ferrules, 5/pk AUC211800 


Graphite Ferrules 





Capillary Column Ferrules For Capillary Sizes - ID 

1/16” to 0.4 mm 0.25 mm AUC211104 

1/16” to 0.5 mm 0.32 mm AUC211105 

1/16” to 0.8 mm 0.53 mm AUC211108 

1/16” to 1.0 mm 0.65 mm AUC211110 

1/16” to 1.2 mm 0.75 mm AUC211112 



1/16” to 1/16” straight ferrule 1/16” AUC211170 

1/16” Graphite Ferrules: 


Ferrule Remover Set 

These are effective tools for removing ferrules.The threaded end locks in the ferrule hole to allow 

removal from the tting. Two tools are supplied for ferrules from 0.4 mm to 0.8 mm ID. 

Description 

Ferrule Remover Set 

Item No. 

AUC205315 

AUC205315 

www.konik-group.com 

Cap. 2: 3


Graphite Ferrules - Sold in packages of 10; except where noted 


• High-purity Graphite; preferred for capillary GC use 

• Ideal for glass-to-metal connections; does not stick to glass 

• Precision-formed; ash free ID 

• Reusable if not overtightened 


Description 

Item No. 

AUC211410 


For Capillary Sizes - ID 

1/8” to 0.4 mm 0.25 mm AUC211204 

1/8” to 0.5 mm 0.32 mm AUC211205 

1/8” to 0.8 mm 0.53 mm AUC211208 


1/4” to 0.5 mm 0.32 mm AUC211405 

1/4” to 0.8 mm 0.53 mm AUC211408 


1/8” to 1/16” 1/16” AUC211210 

1/4” to 4 mm 4 mm AUC211440 

1/4” to 6 mm 6 mm AUC211406 

1/4” to 1/8” 1/16” AUC211410 

1/4” to 1/8” 1/8” AUC211420 

Cap. 2: 4 



Vespel ® /Graphite Ferrules - Sold in packages of 10; except as noted 


• Made from quality DuPont polyimide/graphite blend 

• Recommended for GC/MS interface applications 


• Precision drilled ID 

Description 

Item No. 

Vespel ® /Graphite Ferrules 










Capillary Column Ferrules 

For Capillary Size - ID 

1/16” to 0.3 mm AUC213103 

1/16” to 0.4 mm 0.25 mm AUC213104 

1/16” to 0.5 mm 0.32 mm AUC213105 

1/16” to 0.8 mm 0.53 mm AUC213108 

1/16” to 1.0 mm 0.65 mm AUC213110 



1/16” Vespel ® /Graphite Ferrules: 



1/8” to 0.4 mm 0.25 mm AUC213204 

1/8” to 0.5 mm 0.32 mm AUC213205 

1/8” to 0.8 mm 0.53 mm AUC213208 



1/4” to 0.4 mm 0.25 mm AUC213404 

1/4” to 0.5 mm 0.32 mm AUC213405 

1/4” to 0.8 mm 0.53 mm AUC213408 


1/8” to 1/16” 1/16” AUC213210 

1/4” to 1/16” 1/16” AUC213410 

1/4” to 6 mm 6 mm AUC213406 

1/4” to 1/8” 1/8” AUC213420 

AUC213200 


Cap. 2: 5


PTFE Ferrules - Sold in packages of 10 


• 100% PTFE; completely inert 


Description 

Item No. 






PTFE Ferrules 

AUC2144XX 





Capillary Column Ferrules 

For Capillary Sizes - ID 

1/16” to 0.3 mm AUC214103 

1/16” to 0.4 mm 0.25 mm AUC214104 

1/16” to 0.5 mm 0.32 mm AUC214105 

1/16” to 0.8 mm 0.53 mm AUC214108 

1/16” to 1.0 mm 0.65 mm AUC214110 

1/16” to 1.2 mm 0.75 mm AUC214112 


1/8” to 0.4 mm 0.25 mm AUC214204 

1/8” to 0.5 mm 0.32 mm AUC214205 

1/8” to 0.8 mm 0.53 mm AUC214208 


1/8” to 1/16” 1/16” AUC214210 

1/4” to 6 mm 6 mm AUC214406 

1/4” to 1/16” 1/16” AUC214410 

1/4” to 1/8” 1/8” AUC214420 

1/4” to 3/16” 3/16” AUC214430 

Cap. 2: 6 



FITTINGS 

Swagelok ® Fittings 

KONIK carries a full line of quality Swagelok ttings for GC and HPLC. Please call if you do not see 

the size you need. When ordering Swagelok ttings, prex the catalog number with one of the 

following letters: 

B for brass, SS for stainless steel. 

For example, a 1/4” OD tube union in stainless steel is part number FASSS-400-6. 

Description Size Item No. 

1/16” FAS102-1 

Nut 1/8” FAS202-1 

1/4” FAS402-1 

1/16” FAS103-1 

Front Ferrule 1/8” FAS203-1 

1/4” FAS403-1 

1/16” FAS104-1 

Back Ferrule 1/8” FAS204-1 

1/4” FAS404-1 

1/16” FAS100-C 

Cap 1/8” FAS200-C 

1/4” FAS400-C 

1/16” FAS100-P 

Plug 1/8” FAS200-P 

1/4” FAS400-P 

1/16” to 1/16” FAS100-6 

Unions 1/8” to 1/8” FAS200-6 

1/4” to 1/4” FAS400-6 

1/16” to 1/8” FAS200-6-1 

Reducing Unions 1/16” to 1/4” FAS400-6-1 

1/8” to 1/4” FAS400-6-2 

1/16” x 1/16” x 1/16” FAS100-3 

Union Tees 1/8” x 1/8” x 1/8” FAS200-3 

1/4” x 1/4” x 1/4” FAS400-3 

1/16” to 1/16” NPT FAS100-1-1 

Male Connector 1/8” to 1/8” NPT FAS200-1-2 

1/4” to 1/4” NPT FAS400-1-4 

1/16” to 1/8” NPT FAS100-1-2 

1/8” to 1/16” NPT FAS200-1-1 

1/4” to 1/8” NPT FAS400-1-2 

1/8” to 1/4” NPT FAS200-1-4 

1/8” to 1/8” NPT FAS200-7-2 

Female Connector 1/8” to 1/4” NPT FAS200-7-4 

1/4” to 1/8” NPT FAS400-7-2 

1/4” to 1/4” NPT FAS400-7-4 

1/16” to 1/8” tube FAS100-R-2 

Reducers 1/8” to 1/4” tube FAS200-R-2 

1/4” to 1/8” tube FAS400-R-2 

FAS202-1 

FAS203-1 

FAS204-1 

FAS200-C 

FAS200-P 

FAS200-6 

FAS200-6BT 

FAS200-3 

FAS200-1-2 

FAS200-7-4 

FAS200-R-4 


Cap. 2: 7


Valco Fittings 

AWVZN.5 

AWVZN1 

AWVLZN1 

AWVZN2 

Valco Nuts 

All standard nuts are labeled with the letters ZN. They can be used with Valco ttings as well as 

most other manufacturers. The longer nut is used when the tting head may not be accessible or 

may interfere with adjacent ttings, as on some Valco mutiposition valves. Nuts are made from 

stainless steel. 

Description Size Item No. 

Standard Nut 1/32” AWVZN.5-10 

Standard Nut 1/16” AWVZN1-10 

Long Nut 1/16” AWVLZN1-10 

Standard Nut 1/8” AWVZN2-10 

Note: -10 Indicates pk10, -5 Indicates pk5. 

Valco Ferrules 

AWVZF.5 

AWVZF1 

AWVZF2 

Valco ferrules may be used with all Valco ttings and those of most other manufacturers. Ferrules 

made of stainless steel can be used with metal or PTFE tubing. The polyimide ferrules can be used 

up to 350ºC. Glass-lled PTFE ferrules can be used on metal or glass tubing if the temperature is 

less than 200ºC or 125ºC with PTFE tubing. 

Description Size Material Item No. 

Ferrule 1/32” 300 Series Stainless AWVZF.5-10 

1/32” Polyimide AWVZF.5V-5 

Ferrule 1/16” 300 Series Stainless AWVZF1-10 

1/16” PTFE AWVZF1TFG-10 

1/16” Polyimide AWVZF1V-5 

Ferrule 1/8” 300 Series Stainless AWVZF2-10 

1/8” Polyimide AWVZF2V-5 

Note: -10 Indicates pk10, -5 Indicates pk5. 

AWVZU.5 

Valco Unions 

AWVZU1 

AWVZRU1.5 

AWVZU2 

AWVZRU21 

These join two tubes of uniform bore, without introducing unswept or “dead” volume. Nuts and 

ferrules included. Made from stainless steel. 

Description Size Bore Item No. 

Union 1/32” 0.25 mm (.010”) AWVZU.5 

1/32” 0.8 mm (1/32”) AWVZU.5T 

Union 1/16” 0.75 mm (.029”) AWVZU1 

1/16” 0.25 mm (.010”) AWVZU1C 

1/16” 1/16” AWVZU1T 

Reducing Union 1/16” to 1/32” 0.25 mm (.010”) AWVZRU1.5 

1/16” to 1/32” 0.8 mm (1/32”) AWVZRU1.5T 

Union 1/8” 0.75 mm (.029”) AWVZU2 

1/8” 2 mm (.080”) AWVZU2L 

1/8” 1/8” AWVZU2T 

Reducing Union 1/8” to 1/16” 0.75 mm (.029”) AWVZRU21 

1/8” to 1/16” 0.25 mm (.010”) AWVZRU21C 

1/8” to 1/16” 1/16” AWVZRU21T 

Reducing Union 1/8” to 1/32” 0.25 mm (.010”) AWVZRU2.5 

1/8” to 1/32” 0.8 mm (1/32”) AWVZRU2.5T 

AWVZRU2.5 

Cap. 2: 8 



KONIK INSTRUMENTS INSTALLATION KITS 

The Installation KITS supplied with each instruments (GC, LC, MS or Autosampler), contain enough 

consumable items for the installation and immediate use of the system. 

• KONIK HRGC Installation Kits 

• KONIK HPLC Installation Kit 

• KONIK ROBOKROM AUTOSAMPLER Installation Kits 

• KONIK LC-GC K2 Installation Kit 

Konik HRGC Installation Kits 

Capillary column Installation Kit 

KNK-5000BCCINS 

Contains: 

Description Item nº Qty. 

Capillary column KAP-5 15m x 0.25mm x 0.25um KAP-120212 1 

Polypropylene Tube 30 m 31POL0108030 1 

10µl Syringe ACH80300 1 

Swagelok brass «T» 1/8” 30SWL08MTE/0 3 

Nut brass 1/8” 30SWL08/T000 10 

Back front ferrule brass 1/8” 30SWL08/F000 10 

Swagelok female cap1/8” 30SWL08H00/0 2 

Swagelok male cap 1/8” 30SWL08M000/ 1 

Swagelok Union male-male 1/8” 30SWL08M08M/ 1 

Reducer DET/INY 1/16M - 1/8F GC4102ACOLD/I-0 2 

Graphite Ferrule 0.5”(10u) AUC211105 1 


Fixed key 1/4” - 5/16” 29FIJ104516/ 2 

Combined key 7/16” 29COM716000/ 2 

SS Extractor Multiuse 29KNK00EXT/0 1 

Blue Septa (PK100) AUC234905 1 

Column Scribes KNK-COL-CUT 1 

HRGC 5000B 

Note: You can order also Capillary column installation kit without column KNK-5000BCINS. 

KNK-5000BCCINS 


Cap. 2: 9


Packed column Installation Kit 

KNK-5000BCPINS1/2 

Contains: 


Col. OV101SE-30/Chromosorb 2 m KNK-SS2-KIT1 1 

Col. SS Mol. Sieve 5A 80/100 mesh 18” 2 m KNK-SS2-KIT2 1 

Polypropylene Tube 30 m 31POL0108030 1 

10µl Syringe ACH80300 1 


Nut brass 1/8” 30SWL08/T000 10 


Swagelok female cap1/8” 30SWL08H00/0 2 

Swagelok male cap 1/8” 30SWL08M000/ 1 


Fixed key 1/4” - 5/16” 29FIJ104516/ 2 

Combined key 7/16” 29COM716000/ 2 

SS Extractor Multiuse 29KNK00EXT/0 1 

Blue Septa (PK100) AUC234905 1 

Capillay column Kit 

KNK-5000BCCIK 

Contains: 




Column Scribes KNK-COL-CUT 1 

Monovial Head Space Installation Kit 

KNK-419-318 

KNK-5000BCCIK 

Contains: 


Allen key 2.5 mm 29ALL0025/00 1 

20 ml vial (PK125) KNK-V00-200 1 

Al cap 20 mm (PK125) KNK-TAL-200 1 

Chlorbutyl/PTFE septum 20 mm (PK125) KNK-S01-200 1 

20 mm Manual Crimper AUC320990 1 

T Brass 1/8" 30SWL08MTE/0 3 

Nut Brass 1/8" 30SWL08/T000 10 

Back and front ferrule Brass 1/8in 30SWL08/F000 10 

Ppolypropylene tubing 1/8in (1m) 31POL0108001 5 

Cap. 2: 10 



KONIK HPLC Installation Kit 

HPLC 560/600 system Installation Kit 

KNK-069-900 

Contains: 


Fast coupling Konik Kwik-Snap (pk2) KKS-029-000 1 

HPLC COL. KONIK EXCEL 120 ODS B, 5um 15 cm x 0.4 cm KKS-015697 1 

Teflon joints (pk10) KKS-015324 1 

Guard column cartridge C18 (pk5) KKS-015326 1 

KEL-F Ferrule 1/8” ACE00000470 2 

PEEK Nut 1/8”, 1/4”-28 threads ACE00000450 2 

SS Ferrule 1/16” ACE00000080 2 

SS Nut 1/16”, 10-32 threads ACE00000120 2 

PEEK One-Piece Handtight Nut 1/16”, 10-32 ACE00000121 2 

SS Tubing OD 1/16” x ID 0.25 mm, 0.2 m ACE990215 1 

Open End Wrench 8-10 mm ACE990383 1 

Open End Wrench 7-5,5 mm ACE990403 1 

Hexagon socket screw key SS 3 mm ACE07700 1 

Open End Wrench 13-17 mm ACE990392 1 

PTFE Tubing OD 2.1mm x ID 1.5 mm, 1 m ACES1810-20 1 

Tub cutting 1/16” OD 29KNKTUBCUT/ 1 

Valco Nut INOX 1/16”in pk10 AWVZF1-10 1 

Valco connector 1/16” pk10 AWVZN1-10 1 

Tub INOX 316 1/16”x ID 0.25 mm, 3 m 31INX1625/00 1 

Fixed key 1/4” - 5/16” 29FIJ04516/ 1 

100 µl Syringe ACH80665 1 KONIK HPLC 560 

KONIK HPLC 600 


Cap. 2: 11


Konik Robokrom Autosampler Installation Kits 

Installation kit General 

KNK-415-300 

Contains: 




Allen key 3 mm 29ALL0030/00 1 

KNK-415-310 

Installation kit GC 

KNK-415-310 

Contains: 


Top syringe adapter 10 µl AS5147ADAP010-0 1 

Bottom syringe adapter 5 µl, 10 µl AS5148ADAP--A-0 1 

10 µl Syringe ACH80300 1 

10 ml Screwtop vial (pk10) ADC10-HSV 1 

18 mm Metallic Screw Cap (pk10) ADC18-MSC 1 

18 mm PTFE/Silicone Seal (pk10) ADC18-ST-101 1 

Installation kit LC 

KNK-415-320 

KNK-415-310 

Contains: 


Bottom syringe adapter 0.5, 1, 25,100 i 500 µl AS5148ADAP--B-0 1 






Fixed Key 1/4"-5/16" 29FIJ04516/ 1 

Installation kit Head Space 

KNK-415-330 

Contains: 


HS needle support complete AS5148AGHS----1 1 


Nut brass 1/8” 30SWL08/T000 10 



Polypropylene Tube 1/8” 1 m 31POL0108001 5 

Installation kit Purge&Trap 

KNK-415-340 

KNK-415-330 

Contains: 


P&T/TD needle support complete AS5148AGP&T---1 1 


Nut brass 1/8” 30SWL08/T000 10 



Polypropylene Tube 1/8” 1 m 31POL0108001 5 

Tenax Trap MRS21059-U 1 

Cap. 2: 12 



Installation kit SPmE 

KNK-415-350 

Contains: 


10 µl top syringe adaptor for SPME AS5147ADASPME-0 1 

SPME needle centering piece AS5148CENTAGU-0 1 

Fiber adapter complete AS5148ADAPSPME0 1 

SpmE Polydimethylsiloxane fiber (PK3) ABS57301 1 

Drilled Septa 9.5 mm (PK50) ABS23162-U 1 

Installation kit Magnetic Stirrer 

KNK-415-360 

Contains: 


Magnetic stir bar (12x6 mm) (pk10) MVASWN532 10 

Installation Tray Kit for GC/LC 1 mL Vial Size 

KNK-415-1111 

Contains: 


171 vials tray AS5163BAND171-0 1 

1 ml vial (PK125) KNK-V00-010 1 

Al cap with PTFE septum 8 mm (PK125) KNK-TS0-008 1 

8 mm precision hand crimper AUC308000 1 

ROBOKROM MULTIMODE AUTOSAMPLER 

Installation Tray Kit for GC/LC 2 mL Vial Size 

KNK-415-2222 

Contains: 



2 ml vial (PK100) KNK-V00-020 1 

Al cap with PTFE septum 11 mm (PK100) KNK-TS0-011 1 


Installation Tray Kit for HS 6 mL Vial Size 

KNK-415-3343 

Contains: 



6 ml vial (PK125) KNK-V00-060 1 

Magnetic cap 20 mm (PK125) KNK-TMG-200 1 


20 mm precision hand crimper for mag cap ADCCR-20 1 

KNK-415-2222 


KNK-415-3443 

Contains: 



10 ml vial (PK125) KNK-V00-100 1 




KNK-415-3443 


Cap. 2: 13



KNK-415-3543 

Contains: 



20 ml vial (PK125) KNK-V00-200 1 




Installation Tray Kit for P&T 20 mL Vial Size 

KNK-415-3534 

Contains: 



20 ml vial (PK125) KNK-V00-200 1 

Al cap 20 mm (PK125) KNK-TAL-200 1 

Silicon/Al septum 20 mm (PK125) KNK-S00-200 1 


Installation Tray Kit for SPmE 6 mL Vial Size 

KNK-415-3346 

Contains: 



6 ml vial (PK125) KNK-V00-060 1 


High purity Si/PTFE septum (PK125) KNK-S03-200 1 


Installation Tray Kit for SPmE 10 mL Vial Size 

KNK-415-3446 

Contains: 



10 ml vial (PK125) KNK-V00-100 1 


High purity Si/PTFE septum (PK125) KNK-S03-200 1 


Installation Tray Kit for TD 20 mL Vial Size 

KNK-415-3544 

Contains: 



20 ml vial (PK125) KNK-V00-200 1 


Si/Al septum (PK125) KNK-S00-200 1 


Cap. 2: 14 



Instalalation Kit For ROBOKROM GC Autoinjector 2 AXIS 

KNK-415-310-15 

Contains: 

Description Item nº Qty 


Bottom syringe adapter 5 µl, 10 µl AS5148ADAP--A-0 1 





1.8 ml Clear Screw Top Std. Mouth Vial Combo-Pack (100/pk) AUC123225 1 

Installation Kit RBK LC Autoinjector 2 AXIS 

KNK-415-320-15 

Contains: 


Bottom syringe adapter 0.5, 1, 25,100 i 500 µl AS5148ADAP--B-0 1 






1.8 ml Clear Screw Top Std. Mouth Vial Combo-Pack (100/pk) AUC123225 1 

ROBOKROM AUTOINJECTOR 2 AXIS 

Installation Kit SH For RBK Autoinjector 2 AXIS 

KNK-415-330-08 

Contains: 


HS needle support complete AS5148AGHS----1 1 

T Brass 1/8” 30SWL08MTE/0 1 

Nut Brass 1/8” 30SWL08/T000 10 

Back and front ferrule Brass 1/8” 30SWL08/F000 10 


Ppolypropylene tubing 1/8” (5m) 31POL0108001 1 

10 ml vial (PK125) KNK-V00-100 1 




Konik K2 Installation Kit 

K2 system Installation Kit 

KNK-K2-500 

Contains: 


¼” Graphite Ferrules AUC211400 2 

SS tubing 0.75 mm, 1 m 31INX1675/00 1 

SS tubing 0.25 mm, 1 m 31INX1625/00 1 

Viton O’ring 2.9 x 1.78 37TOR02917/V 10 

Viton O’ring 5 x 2 37TOR05020/V 10 

K2 Empty trap - quartz KNK-K2-LEMPTQ 1 

K2 Tenax trap - quartz KNK-K2-LTENXQ 1 

1/16”, 2-Hole , 0.5 mm Graphite Ferrules AUC211125 1 

Guard Column 0.32 mm (3 m) AUC433116 1 

Graphite/Vespel Ferrule (10u) AUC213105 1 

10 µm PEEK filter AWV JR-68251 1 

Backferrule special tool 29FIJ055070/ 1 


K2Q12 MULTIDIMENSIONAL HPLC+GC-MS 


Cap. 2: 15

Konik Consumables Catalogue_redistribucion y capitulos 1 y 2 ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?