CATIA V5 – Base Full - C-Con GmbH

Professional continuing education
CATIA ® V5 - Base Full
Software CATIA ® = Computer Aided Three-Dimensional Interactive Application
This CAD-program is now established as the industry standard for 3D-design programs. With the aid of CATIA® the user
can not only prepare 2-dimensioinal drawings and subsequently develop them further as 3-dimensional models but it is
also possible to generate the entire range of industrial design processes, starting from marketing and the initial product
design, analysis and assembly right through to maintenance.
Company
Since 1991, the C-CON group of companies is known as an innovative, dynamic and
expanding enterprise in the areas of the automotive, aeronautical and space industries
as well as a subcontractor for general engineering. Our well-funded and extensive
expertise as well as the very intensive and effective co-operation with car
manufacturers and their sub-suppliers is reflected in the design and implementation of
design and development orders. C-CON GmbH takes into account any specific
requirements in the employment market, as necessary, in order to provide you with the
appropriate CAD qualifications in the area of CATIA® V5 that are adapted to current demands in the job market.
We are also continuously looking for employees with the right qualifications in CAD.
Course
Due to the efficiency of our training groups (limited to a maximum of 10 participants per group), we are able to offer a
concentrated course at our training center that only takes 2 weeks (90 lessons).
Of course, we provide a separate CAD-work station for each participant.
Lecturers / Target groups
With extensive experience in terms of methodology and design, our trainers communicate in this CATIA® V5 - Base
Full in a way that offers a perfect beginning for all principal areas of the application of 3D-design with CATIA® V5. This
advanced educational program gets you acquainted with all basic areas of working with 3D-modeling and CATIA® V5.
This training is aimed to managers, project managers, designers, technicians and administrators.
Certification
With the certificate that we issue after successful completion of the course you are qualified to work in consulting
engineering practices or engineering companies, but also in the design and development departments of various
businesses in a wide range of industries such as the automotive industry, aeronautical and space industry as well as in
general engineering.
Quality certification
Since 2001, our quality management system is certified per DIN ISO 9001:2008. We are also certified as accredited as
a responsible body for the promotion of professional continuing education per AZWV. Thus, we are in a position to
offer you the highest level and quality of professional continuing education.
Cost
Your advisor at the Federal Employment Office will inform you about the possibilities regarding professional promotion
and sponsorship per SGB III. This is also true for the sponsored special program for older employees and those with
lower qualifications that has been introduced as of March 2007 (WeGebAU). On presentation of such an educational
voucher, C-CON GmbH will deal with the Federal Employment Office directly regarding the course fees.
Information: http://www.arbeitsagentur.de

Educational goal
Professional continuing education
CATIA ® V5 - Base Full
Qualification for CAD-applications in 3D-modeling with CATIA® V5
Entry requirement
College or university graduate in technical fields or engineering science
College or university graduate in architecture, surveying, engineering, process engineering, or a similar field
College drop outs of the above fields
Non-academic persons with technical knowledge (technicians, master craftsmen, design draftsman)
Relevant professional experience
Particular suitability:
Technical understanding
Spatial sense
PC-application knowledge
Contents
Introduction, basic principles
USER-INTERFACE
Basic INFRASTRUCTURE (basic functionality CATIA® V5)
Basic PART DESIGN (design of solid bodies)
Basic WIREFRAME & SURFACE (wire geometries and surfaces)
Basic ASSEMBLY DESIGN
Basic DRAFTING (drawing department)
Basic DMU (Measuring and sections in 3D)
Basic V4 INTEGRATION (integration CATIA® V4 in CATIA® V5)
The functions based on the English language user interface will be communicated and explained in German.
Final exam
There will be an examination at the end of the course. The appraisal has direct influence on the report.
Duration of course
2 weeks = 90 lessons
Start: 1. day 9:00 a.m., other days 8:00 a.m., End: daily about 16:30 p.m., friday about. 15:00 p.m.
Breaks: a.m. and p.m. 15 minutes, noon 1 hour. The course takes place in our training center.
Address:
C-CON GmbH München
Training Center
Knorrstr. 135
80937 München
Tel.: 089 / 35882 140
Fax: 089 / 35882 100
schulung-muenchen@c-con.de
www.c-con.de
C-CON GmbH Sindelfingen
Training Center
Kolumbusstr. 1
71063 Sindelfingen
Tel.: 07031 / 79391 19
Fax: 07031 / 79391 21
schulung-sindelfingen@c-con.de
www.c-con.de
C-CON GmbH Köln
Training Center
Leibnizpark 1
51503 Rösrath
Tel.: 02205 / 89746 81
Fax: 02205 / 89746 86
schulung-koeln@c-con.de
www.c-con.de
Of course, we would be please to provide you with more information on this course.
Please contact your C-CON partner.
C-CON GmbH Hannover
Training Center
Schilfkamp 13
30851 Langenhagen
Tel.: 0511 / 475419 0
Fax: 0511 / 475419 50
schulung-hannover@c-con.de
www.c-con.de