1-800-423-0030 Early Summer 2012 - Jamestown Distributors

Jamestown Distributors
For boaters and their craft
Early Summer 2012
1-800-423-0030
www.JamestownDistributors.com

Jamestown Distributors
For boaters and their craft
Tech Support
When you shop at
Jamestown you’re not
just buying products -
you get technical support
& advice that you will not
find anywhere else. Call
our Tech Hotline at
401-253-3840 or email:
tech@jamestowndistributors.com
Price Match
Guarantee
If you find a lower
delivered price on a new
identical item - just show
us the price & we will
match it. The item must
be in stock & available
from an authorized US
reseller. Email us at:
info@jamestowndistributors.com
JD Mobile Site
Get FREE Shipping
all year!
Use your smartphone and
the JD mobile site to
simplify your purchasing and
get Free Shipping all year!
*Free Shipping only for orders placed
on our mobile website and shipped
via Ground in the Continental US.
Some exclusions apply.
See website for details.
Remember, we can’t fit it all in this catalog.
See our full selection of over 70,000 products at
Jamestowndistributors.com

Our Best Selling Varnish
Gloss Clear Varnish
·Highest quality marine spar varnish.
·Superior protection in all climates.
·Fortified with UV inhibitors.
·Self leveling.
500 ml. $19.99
5000 ml. $156.99
1000 ml
List: $50.19
$2999
Save
40 %
Go for Two!
Get Two 1000ml cans of
Gloss Clear Varnish
And we will throw-in for FREE:
(2) Quart Varnish pails
(2) 2” Foam Brush
(2) Varnish Straining Funnels
(2) Stir Sticks
All for only $49 99
ITEM # EPF-CVKIT
Great
Deal!
Check it out
JD Photo Contest Winner - Ivan Beachy’s 14 foot custom designed canoe.
Constructed with Ponderosa pine, Honduras mahogany, Australian lacewood,
and American Ash. Weighing in at only 55lbs. Nice work Ivan!
Rubbed Effect
Varnish
·Rich satin rubbed
appearance.
·Quick-drying interior
varnish provides
excellent protection.
500 ml. $23.99
Wood Finish
Matte Varnish
·Premium low-gloss
matte finish.
·No sanding between
coats.
·Interior/Exterior
finish provides
rich, extraordinary
protection.
Wood Finish
Gloss Varnish
·No sanding between
coats!
·Excellent adhesion
and protection for Teak.
·Fortified with UV
inhibitors.
500 ml. $23.99
1000 ml.
$4299
1000 ml.
$4499
1000 ml.
$3899
800.423.0030 3

Teak Sealer
·Waterproofs and protects teak.
·Goes on easily and dries quickly.
Available in Clear, Gold, & Natural.
Quart $34.99
Gallons
$10999
Cetol Marine Wood Finish
·Easy to apply with good durability.
·Synthetic semi transparent wood treatment.
Available in Satin, Natural Teak, Marine Light, and Gloss.
Finish Size Item # Price
Satin quart INT-IVA300Q $34.99
Gloss quart INT-IVA315Q $34.99
Marine Light quart INT-IVA290Q $34.99
Natural Teak quart INT-IVA316Q $34.99
Quarts Only $ 3499
Rapid Coat &
Rapid Clear
Semco
·Three coats can be applied
in 18-hours.
·Rapidclear has a clear
finish with no tint.
·Rapidcoat is lightly tinited with a warm color.
·No sanding between coats.
Color Item # Price
Rapid Coat (750ml) EPF-RC750 $36.99
Rapid Clear (750ml) EPF-RCC750 $36.99
Rapid Matte (750ml) EPF-RCCM750 $36.99
Ospho Metal Treatment
·Prepares rusted surfaces for painting.
·Contains Phosphoric acid.
·Resists and retards rust while providing a sound
base for paint.
Gallons $34.99
Quarts
$1999
Save
“I would buy this product again & again”
Ospho Metal Treatment
“This is the greatest product for rust. I have used it for rebuilding VERY
rusty horse trailers in Fl. What great results. Hard to find in some areas.”
Semco Teak Cleaner
·Two-part cleaning system.
·Simplest, most thorough way to clean teak.
Kit
Penetrol
$2499
·Added to varnish and enamels to make
brushing easier - improve flow.
·Paint additive for wood and metal primers.
Gallon $29.99
Quarts
Deks Olje
$999
Circa 1850 Tung Oil
·Natural oil extracted from the nut of the
oriental tung tree.
Quarts
·Synthetic Oil to protect marine wood.
·D1 is a penetrating oil that leaves a matte
finish.
·D2 has a hard glossy finish.
Available in Matte & Gloss.
2.5L $69.53
Liter
$1435
$3299
4
See all of our wood finish & sealers at Jamestowndistributors.com

Schooner Varnish
·Ultra violet filters for remarkable durability.
·Bright, clear, high gloss finish with
superior self leveling properties.
Pints $19.99
Quarts
List: $40.32
$3299
Schooner Gold Varnish
·Thick, high gloss varnish.
·Designed to save you time with a high
build formula.
Pints $22.99
Quarts
$3799
Goldspar Satin Varnish
·Interior Varnish with warm satin finish.
·Flows on easily.
Pints $20.99
Spar Captain’s Varnish
·High solids varnish.
·Very pale, will not discolor wood.
·Fortified with UV inhibitors.
Gallons $82.99
Pints $19.99
Quarts
List: $43.11
$2999
Z Spar Flagship Varnish
·Deep rich varnish with maximum
UV protection.
·Glides on smoothly & evenly.
Gallons $93.99
Pints $23.99
Quarts
List: $49.76
$3399
Save
$
13
Save
$
15
Varnish
Quarts
$3099
Perfection Plus
Two Part Varnish
Z
·Polyurethane clear coat.
·Mirror-like gloss.
·Incredible durability.
Quarts
$7899
Badger Hair Brushes
·These produce superb results!
·Hair is cone shaped, thick near the
tip and thin near the root.
Size Item # Price
1 BRUBH1 $8.99
1-1/2 BRUBH112 $11.99
2 BRUBH2 $13.99
2-1/2 BRUBH212 $16.99
3 BRUBH3 $19.99
This is the varnish brush the pros use!
800.423.0030
5

Get Better Results with the Best Supplies
Paint Roller Frames
·These premium roller frames
feature a 4-wire bird cage with
1/4” shank and a deluxe plastic
threaded handle.
·Heavy Duty 9” model offers a 5-wire bird cage.
Size Item # Each
3” PST7803 $2.49
7” PST7807 $2.49
9” PST7809 $2.49
*9” PST7809IF $4.49
*Heavy Duty
Roller Trays & Liners
Paint Roller Covers
·All of these Redtree roller covers
offer a solvent resistant core and
are suitable for all marine coatings,
varnishes and sealers.
Size Item # Each Case Qty
Smooth (1/4" nap, white)
3” 3R22PH $2.63
7" PS5247 $3.49 36
9" PS5249 $3.99 50
Semi-Smooth (3/8" nap, light pink)
7" PS6247 $3.45 36
9" PS6249 $3.84 50
Rough (3/4" nap, yellow)
9" PS6549 $3.84 50
Mohair Smooth (For Fiberglass, 3/16" nap, maroon)
7" PSRC1127 $3.80 50
9" PSRC1129 $4.26 50
Description Item # Each
Metal tray PSLS770 $4.29
Plastic liner for metal tray PSLS765 $0.78
Plastic Tray 9” ENC-02512 $2.49
Foam Roller Covers
Yellow
1/8” nap. Economical covers for
use with gloss or semi gloss coatings,
leaves no lint or stipple. Pack of two.
Size Item # Pair
3" ARW-FOAM3 $3.36
7" ARW-FOAM7 $4.49
9" ARW-FOAM9 $5.99
Mighty Mini
Paint Roller Kit
Kit includes 4-inch
roller frame with a
twin pack foam roller
covers, 6x11 paint
tray and a pair of
disposable gloves.
Reg: $7.76
ARW-4FMSK
Only $ 4 99
Save
35 %
Epoxy Pro Roller Covers
A high density polyurethane foam
yellow roller, ideal for epoxy, paint
and varnish applications. Covers are
7" wide. Packages of two.
Item # Size Price
ARW-7PFME-T/P 7" $7.70
Mighty Mini Roller Frame
Paint roller rod frame with plastic handle, available
in 11” and 16” sizes. Use the 11” roller frame with 4”
foam roller cover refills. Use the 16” roller frame with
6.5” foam roller cover refills.
Size Item # Price
11” ARW-RF10011 $1.97
16” ARW-6516OHR $2.79
Mighty Mini Foam Rollers
4” Sponge Roller has 11” Handle and 6” Sponge
Roller has a 10” Handle. Rollers are white foam.
Great choice for traditional varnishes, urethanes
& lower viscosity enamels.
Description Size Item# Price
Covers (2-pack) 4" ARW-4-FMT/P $3.21
Covers (2-pack) 6" ARW-65FMTP $4.80
6
Jamestowndistributors.com

Epifanes Full Brush
·Eliptical in shape!
·Bristles are short enough to offer good
control with varnish yet still offer a soft touch.
·Great brush for all fine finishes.
20 % Off
Width Item # Price
50mm. 1-1/2 in. EPF-BF50 $34.99
55mm. 2 in. EPF-BF55 $44.99
60mm. 2-1/4 in. EPF-BF60 $54.99
75mm. 3 in. EPF-BF75 $64.99
Foam Brushes
·High quality foam brushes for use with
varnish, enamels, stains, latex & oil paints.
·Not for use with shellac or lacquer.
Width Qty/ bx Item # Price
1 in. 48 BRUF1 $9.99
2 in. 48 BRUF2 $15.99
3 in. 36 BRUF3 $16.99
4 in. 24 BRUF4 $12.99
Paint Supplies
Slim Badger Hair Brushes
·Badger style bristle.
·Excellent for varnish and all marine finish.
Width Item # Price
1 in. BRUSB1 $6.42
1-1/2 in. BRUSB112 $8.38
2 in. BRUSB2 $10.11
2-1/2 in. BRUSB212 $12.84
3 in. BRUSB3 $16.50
Chip Brushes
·Natural bristle brushes
with wood handle set in epoxy.
·For use with paints, resins, glues
and solvents.
Width Qty/ bx Item # Price
1/2 in. 36 BRUC12 $12.99
1 in. 36 BRUC1 $19.99
1-1/2 in. 36 BRUC112 $14.99
2 in. 24 BRUC2 $19.99
3 in. 12 BRUC3 $15.99
Plastic Paint Pails
·Great for mixing up epoxies,
paint and varnish.
·Marked with accurate
measurement on sides.
Size Item # Pack (5)
8 oz ENC-30308 $2.55
16 oz PS16PP $3.13
1 qt PS1PP $4.03
2.5 qt PS212PP $6.72
5 qt PS5PP $10.89
Double Thick Chip
Brushes
·100% Natural bristles.
·Twice as thick as regular chip brush
to hold more paint and produce a
smooth, even finish.
Width Item # Price
1 in. BRUCDT1 $0.99
2 in. BRUCDT2 $1.19
3 in. BRUCDT3 $2.49
4 in. BRUCDT4 $3.49
Paint Brush Keeper
·Keep your good brushes nice and new
by storing them in the JD Brush Keeper.
The 14” tall plastic container has a
removable rack at the top to suspend up
to 8 brushes in kerosene. Also has an air
tight lid to prevent evaporation
and spillage.
Preval Spray Gun Kit
·Just fill and spray up to 16 ounces of any liquid.
·Easy to use.
·Excellent for gelcoat and touch-up paint jobs.
PSPRE267
Only $ 6 49
CBC-BK1
Only $ 39 99
800.423.0030 7

NEW
Jamestown
Select
Bottompaint
Cleaner & Better
Ablative Technology
Incredible Value!
Jamestown Select
Ablative Bottompaint
·Easy to apply. Cleans up nicely with soap
and water. And provides excellent multi-year
protection for fiberglass and wooden boats.
We selected this Ablative Antifouling Paint
because we feel it is an incredible value. It
offers outstanding results using waterbased
antifoulants - which means that it is very
low in VOC’s, environmentally friendly and
extremely easy to use. It should be applied
in multiple coats for multi-season protection.
Can be applied over aged antifouling coats
without fear of lifting. Get a free bottompaint
roller and metal tray kit -- a $5 value -- with
each gallon. Available in Black, Blue,
Red & Shark White.
. Incredible antifouling protection
. Tested & trusted by JD tech team
. Cleans up with soap & water
. Low VOC
Free Roller &
Tray Kit with
every gallon!
Gallons $99 99
2011 Bottompaint Test
Jamestown Select Bottompaint
“The ease of application, the coverage characteristics (1 gallon
more than enough for my 30ft craft), & the simple clean-up
procedure with soap & water is astounding. What was amazing
was that when my vessel was put into dry dock for the winter
season, my hull was free from any marine growth.”
Captain Jim S, Pogyman II
Narragansett Bay
8
See all of our Bottompaint at Jamestowndistributors.com

Up to
$20
Mail-in Rebate
ends 5/31/2012
Trinidad SR
·Dual biocide paint for heavy-fouling
areas.
·Up to 70% copper content plus Slime
Fighting biocides.
·Long lasting protection for Tropical
waters.
Available in Black, Blue, Green, & Red.
Quart $89.99
Gallons
$24999
Only $ 229 99 with rebate
Trinidad
·Strongest bottom paint available.
·Highest percentage of copper
available (up to 75%).
Available in Black, Blue, Green, & Red.
Quart $84.99
Gallons
$21499
3M #2090 Blue Masking
Weather Resistant Tape
·Critical paint masking above
the waterline, Bottom painting,
Brightwork finishing & coating.
Outdoor masking for 7 days.
Clean & easy removal. 60 yards.
Available in 3/4”, 1”, 1-1/2”, 2”.
Video Online
Only $ 194 99 with rebate
Width Item # Price
3/4 in. 3M-06817 $3.99
1 in. 3M-06818 $4.99
1-1/2 in. 3M-06819 $7.49
2 in. 3M-06820 $11.99
JD Tech Team:
Dave Francazio
Specializing in paints/varnish
and fasteners
{ 37 years in industry }
Speak to our advisors at 800-423-0030
Vivid
·Multi-season, antifouling paint in bright colors.
·Dual biocide protection.
Available in Black, White, Blue, Green, Yellow, & Red.
Quart $74.99
Gallons
List: $219.99
Unepoxy
$19499
·Affordable general purpose antifouling
paint.
·Excellent adhesion to fiberglass & wood.
·Can be applied over old, hard antifouling
coats without fear of lifting.
Available in Red, Blue, Black, & Green.
Quart $37.99
Gallons
Hydrocoat
$10999
·Water-based ablative antifouling
bottom paint.
·Easy clean-up with soap and water.
·40% Copper content.
Available in Red, Blue, Black, & Green.
Quart $54.99
Gallons
Only $ 184 99 with rebate
$12999
Save $ 25
Only $ 104 99 with rebate
Only $ 119 99 with rebate
800.423.0030
9

Rock Solid Bottompaint Values
Fiberglass
Bottomkote NT
·Dual-resin technology
combines the advantages of
ablative & hard antifoulants.
·Universal use on all power &
sailboats.
·Hull stays clean & smooth
without the heavy paint
build-up.
Available in Blue, Black,
Green & Red.
Quart $44.99
Gallons
List: $119.99
Trilux 33
$8999
·Tin free antifouling paint.
·Designed for all boats - but ideal for
aluminum hulls, outdrives & outboards.
·Uses Biolux technology to control
slime & algae.
Available in Black, White, Blue, Green,
& Red.
Quart $67.99
Gallons
$21999
Save $ 30
VC Performance
Epoxy
·Two part kit ideal for
trailered boats.
·Contains no antifouling
biocide.
·Very hard smooth
finish.
Available in White.
Quart $59.99
Gallon Kit
VC Offshore Racing
·Antifouling paint for the serious racer.
·For salt and freshwater applications.
·Has a hard smooth burnishable finish.
Available in Black, Blue & Red.
Baltoplate
$18999
·Easier to sand formula.
·Use Baltoplate on fiberglass,
wood & primed underwater metals.
Available in Gray.
Trilux 33 Aerosol Spray Paint
·Prevents growth on aluminum outdrives and
underwater metals.
·Biolux technology is used to control slime growth.
Available in Black, White, & Gray.
Type Item # Price/ Gal
VC Offshore INT-V116G Blue $259.99
VC Offshore INT-V118G Black $259.99
VC Offshore INT-V117G Red $239.99
Baltoplate INT-R3950G $259.99
Each
$3199
Bottompaint Roller Kit
·Tray & roller in one convenient package.
·Includes 9” roller cover, 4-wire birdcage
frame roller, & a metal tray.
RED-JDKIT
Only $ 4 99
Great Value!
Pacifica Plus
·A Copper free, dual biocide
antifouling.
·Suitable for all substrates.
·Dries quickly with minimal odors.
Available in Blue, Black & Red.
Gallons
$17999
Copper Free
10
Jamestowndistributors.com

Micron CSC
·Multi-season, self-polishing protection.
·Can be hauled and re-launched
without loss of performance.
·Higher solids makes for a harder
surface.
Available in Black, White, Blue,Green,
& Red.
Quart $64.99
Gallons
$20999
Bottompaint
Micron Extra
·Exceptional defense against shell,
weed and slime fouling.
·Multi-season, self-polishing protection.
·Combines Biolux with controlled
solubility copolymer antifouling
technology.
Available in Black, White, Blue, Green,
Dark Blue, Brown & Red.
Quart $69.99
Gallons
List: $239.99
Micron 66
$22999
·Advanced self polishing Copolymer
Technology that reacts with salt water
in a controlled way.
·Provides excellent protection for at
least two seasons.
·No TBT.
Available in Black, Blue, Green,
& Red.
Gallons
$26999
Save $ 10
ACT
·Best selling antifouling ablative bottom paint for all
fouling areas.
·Sanding is not required prior to recoating each season.
Available in Black, White, Blue, Green, Dark Blue, Brown
& Red.
Quart $52.99
Gallons
List: $159.99
Save $ 30
$12999
Interprotect 2000E Epoxy Primer
·Excellent Primer to create a
barrier against water permeation.
·Two part self priming epoxy.
Available in Gray & White.
Quart $39.99
Gallons
$8599
Tim, painting the waterline
800.423.0030 11

Dan Philgreen, JD Photo Contest Winner
3M Ready Maskers
·The 3M Ready Masking System
(shown above) is a convenient pretaped
plastic film which unfolds to cover
and protect surfaces while painting.
Pretaped with #2090 7-day masking
tape. Easy to
apply and
remove. Sunlight
stable and gives
the user 7-day
clean removal.
Aqua Strip
·Aqua Strip is a marine finish remover
that can safely remove up to 10 layers
of bottom paint or varnish at a time. It
remains wet for extended periods of
time, and can be brushed, rolled, or
sprayed.
Ultra Strip
·The Ultimate paint Remover. Ultra
Strip has all the advantages of Aqua
Strip with added flexibility. Can remove
one layer in as little as 15 minutes (or
4 layers in under 4 hours). Approx.
coverage is 50 sf/gal.
Size Item # Price
24 in. x 30yds 3M-06696 $11.85
35 in. x 25yds 3M-06697 $10.34
Quarts $ 24 99 Gallons $ 59 99
Gallons $ 64 99
12
Jamestowndistributors.com

3M Scotch 233+
Use this tape indoors or out
for critical paint masking
above the waterline, bottom
painting, brightwork, finishing,
and coating. This tape is not
designed for use on outdoor
masking for more than 1 day.
60-yard rolls.
Available in 1/2”, 3/4”, 1”,
1-1/2”, 2”, 3”.
Width Item # Price
1/2 in. 3M-26332 $4.99
3/4 in. 3M-26334 $5.76
1 in. 3M-26336 $6.49
1-1/2 in. 3M-26338 $12.99
2” 3M-26340 $13.99
3” 3M-26341 $24.05
Scotch 2080
Blue Painter’s Tape
#2080 is ideal for most
smooth or delicate surfaces
such as: most fresh paints,
wallpaper, wood surfaces
and wall board. Durable and
conformable. This weather
resistant tape can remain
outdoors for up to 2 months.
60-yard roll.
Width Item # Price
3/4 in. 3M-80988 $7.49
1 in. 3M-79748 $11.99
1-1/2 in. 3M-79749 $8.49
2 in. 3M-79750 $18.99
3M 218 Fine Line
Masking Tape
#218 Fine Line masking tape is
great for paint striping. This tape
stretches for smooth curves and
tears easily. Not for extended
outdoor use of more than one day.
Finest color separation available.
Paint sharp, precise lines with clean
edges. 60-yard rolls.
Available in 1/4”, 1/2”, 3/4”, 1”.
Safe release
masking tape
Width Item # Price
1/4 in. 3M-06301 $26.99
1/2 in. 3M-04698 $13.06
3/4 in. 3M-04699 $14.99
1 in. 3M-04700 $17.99
Bio-Solv Acetone
Replacement
An environmentally friendly
solvent that can be used
in place of Acetone or
Xylene to effectively clean
or prepare surfaces to be
painted or epoxied. Bio-
Solv is safe to use, noncarcinogenic
and has no
environmentally hazardous
ingredients or global
warming compounds.
Environmentally
Friendly Solvent
Works great to clean-up Epoxy or Paints
Size Item # MSRP
pint MAS-35-332 $13.99
quart MAS-35-333 $23.99
half gallon MAS-35-334 $33.99
gallon MAS-35-335 $69.99
5 gallon MAS-35-336 $394.99
Acetone
Acetone is the strongest and fastest
evaporating solvent around. Excellent for
dissolving two-part epoxies before set
up, for cleaning fiberglass repair tools
and for thinning fiberglass resin. Acetone
will easily remove sticky residue on
glass and porcelain left by stickers and
labels, and will clean lacquer tools well.
Gallons $ 21 99 Quarts $ 7 99
Denatured Alcohol
Pure denatured alcohol. Only alcohol
solvent type suitable for shellac products,
will not thin most other coatings.
Denatured alcohol can be dissolved in
water for cleaning. Can also be used in
alcohol type stoves.
Gallons $ 17 99 Quarts $ 8 99
JD Tech Team:
Kerry Souza
Specializing in paints
{ 3 years in industry }
Speak to our advisors at 800-423-0030
Paint Supllies
800.423.0030 13

Premium Topside paints
Brightside
Polyurethane
·Get the look of a
two-part polyurethane
with the application
ease of a standard
enamel.
·Easy cleaning
along with excellent
stain and abrasion
resistance.
·UV stabilizers
ensure high gloss and
color retention.
Quarts 32
$ 99
List: $49.99
Save $ 17
24 Great Brightside Colors
Perfection Two Part
Polyurethane
·Premium two-part topside paint.
·Mirror-like gloss.
·Great UV resistance for longevity.
Choose from 14 great colors.
Quarts
List: $79.99
$6499
Premium Yacht Enamel
·Superb for topside, deck & fashion
striping.
·Traditional marine enamel provides a
durable finish.
Available in Hatteras Off-White, Semi-gloss
White, High Intensity White, and Gunmetal
Grey. Also available in select quart sizes.
Gallons
$6999
Interdeck
Non-Skid Deck Coating
·Pre-mixed non-skid finish.
·Excellent slip resistance with a tough
polyurethane finish.
·Low sheen to reduce glare.
Choose from 5 great colors.
Save
$
15
JD Tech Team:
Ryan Lavoie
Specializing in paints & varnishes
{ 5 years in industry }
Pre-Kote Primer
for One-Part Finishes
·For use with Brightside or any other
one-part finish.
·Contains microsperes for superior
build & hide.
·For use above the waterline.
Available in White & Gray.
Quarts
Bilgekote
$3599
·Fast-drying and durable coating
designed for bilge areas.
·Cleans easily.
Available in White and Grey.
Quarts
$2899
Quarts
$2599
Gallons
$7999
Gallons
$6999
14
See all of our Topside Paints at Jamestowndistributors.com

for superior results
EasyPoxy Topside Paint
·Exceptionally easy to apply Topside finish.
·Contains UV filters to increase gloss
retention and durability.
·One part polyurethane paint with brilliant
high gloss colors.
Choose from 21 great colors.
List: $49.99
Quarts
Gallons
Z-Spar Topside Enamels
·Topside Alkyd Enamel Paint.
·Provides excellent high gloss retention
and durability for overall long life.
·Great self leveling qualities.
Available in Semi-gloss WHite, Gloss
White & Solid Coat Gloss White.
Quarts
Gallons
$32 99
$24 99
$72 99
Save
$
17
Monourethane
One-Part Paint
·Thick, rich, beautiful
topside paint.
·Incredibly hard and
durable.
·Outstanding gloss.
·Easy to apply.
Choose from 16 great
colors.
750 ml.
Reg: $53.64
$3499
Save $ 18
“This is great stuff!”
I rolled & hand-tipped with excellent results.
Excellent flow & leveling properties. Talk to the
JD tech help for pointers. They really helped me.
-Gordon, NC
$84 99 Starting at
JD VIP
Only $49 99
Two-Part
PolyUrethanes
·Long lasting durability.
·Hard, high-gloss finish.
Choose from 22 great colors.
Free unlimited standard
Shipping for one year
*Check site for full list of benefits
$4699
KiwiGrip
Non-skid deck coating
·Hard acrylic polymer provides
an incredibly durable non-skid
surface.
·Easy to apply with appropriate
rollers (sold seperately).
·Texture can be adjusted.
·Includes FREE Roller cover.
Available in White, Grey, Cream & Blue. Easily adjust
the texture of
$
Quarts 4250 the non-skid
Gallons
$ 14000
Yacht Enamel
·Great improvement over traditional
enamels.
·Incredible colors with a mirror-like gloss.
·Hard & durable.
Choose from 44 great colors.
750 ml. Starting at 45
$ 20
800.423.0030
15

Great Polishing Values!
Boat Polishing Kit
·Every year, tons of people ask us what we recommend for polishing
and compounding the topsides of their boat. This is a great deal. You
get the whole Polishing System. This would normally retail at $222.
Let us set you up with everything you need to polish a 20-foot boat to
a mind-entrancing glaze.
JD-POLISHING-BASIC
Only $ 199 99
You Save
$
22!
Kit Includes:
Price
BUF-PS07401 7” Buffalo Angle Polisher $94.99
MMM-06044 Imperial Compound $35.99
MMM-09030 Ultra Performance Paste Wax $27.99
MMM-05705 Superbuff Pad $45.85
MMM-05710 Superbuff Mandrel Adapter $11.99
NOT-06038 Microfiber Cleaning Cloth $4.88
Time to buff & polish your boat!
3M Imperial
Compound
·Fast cut and leaves
an excellent finish
without swirl marks.
·Can cut your
polishing time in half --
One step process!
Gallons $160.47
MMM-06044
Only $ 99 /qt.
35
FREE Shipping
on JD Mobile Site
Use your smartphone to research &
shop at Jamestowndistributors.com and
get Free Shipping! Limited time offer.
See website for details.
3M Finesse-It II
·High quality finishing
material.
·Removes micro-fine
sanding scratches and
swirl marks.
·Good for gelcoats but
great for topside paints.
·Leaves a glazed finish.
32oz. $42.99
MMM-09048
16oz. Only $ 21 99
3M Ultra Performance Wax
·Leaves a protective high gloss coating.
·Long lasting protection.
·Easy on and Easy off.
MMM-09030
9.5oz. Only $ 27 99
“The best on the market”
Ultra Performance Wax
“I am a professional boat polisher & this is the
only wax I use. I figure that if I work my tail off to
put a pro shine on the boat, the wax should give
the best shine, plus last. The second coat of wax
applied 3 months after the first one makes all the
difference. You must have the boat clean as all
waxes only protect what they cover. Use a soap
that will not remove wax, with no additives (3M
boat soap). Most waxings last 2 years or more.”
16
To view all cleaning & Polishing Supplies: Jamestowndistributors.com

3M Marine Fiberglass Restorer & Wax
·Restores shine and protects in one step.
·Designed for heavy oxidation.
·Very easy to use!
16oz. $16.54
MMM-09006
32oz. Only $ 24 99
Collinite Boat Wax
Buff Magic
·Fiberglass reconditioner and deoxidizer.
·Easy to use with a buffing machine or by hand.
YBP-YBP0101
Only $ 25 99
Awlgrip AWLCARE
·Protective Polymer Sealer.
·This is a Hand-Applied, non-abrasive sealer for
Awlgrip topcoats.
·It will remove mild stains, spots and diesel soot.
AWL-73240P
Only $ 16 26
One Step Solution
·Collinite’s line of waxes can clean and protect
any surface in & out.
·Good for fiberglass, marine paint & metal.
Type Size Item # Each
Fleetwax Pint CLT-870 $19.99
Fleetwax Paste 12 oz can CLT-885 $19.99
Fiberglass Cleaner Pint CLT-920P $11.99
Fiberglass Boat Wax Pint CLT-925 $17.99
Metal Wax Pint CLT-850 $14.99
“A+++ for Buff Magic”
Buff Magic
“Used Buff Magic with a Flex dual action polisher on our 11 year old
22’ Four Winns. The results were fantastic, the boat looks like new!”
“Basta” in the water at Gannon & Benjamin Marine
On-Off Hull & Bottom Cleaner
·Cleans immediately without scrubbing or waiting.
·Will not harm gelcoat.
·This is the stuff the pros use.
MKT-2032
Only $ 12 99
TSP - Trisodium Phosphate
Cleaner
·This is the stuff to clean & prepare surfaces
for re-painting.
·Removes mildew and mildew stains when
mixed with bleach.
·Can remove heavy grease, smoke,
& soot stains.
SCL-10622
Only $ 10 99
Spray Nine Cleaner
·Controls mildew and mold.
·Removes stubborn stains with ease.
·Perfect for fiberglass, vinyl, rubber,
plastic, and any hard surface above &
below the deck.
SPN-26901 Gallons $18.37
SPN-26932 32oz.
Only $ 6 99
Awlgrip Awlwash
·Formulated to clean Awlgrip and Awlcraft
2000 topcoats.
·Does not contain acids or harmful abrasives.
AWL-73234Q
Only $ 14 29
Top rated General Cleaner
by Practical Sailor
Cleaning & Polishing
800.423.0030
17

Wood Screws - Phillips
18-8 stainless steel
Flat Head
Wood screws have coarse & deep
threads to better anchor into the wood.
Phillips drive allows for greater torque
application when fastening. Stainless
steel provides strong corrosion resistance.
Size Length Part # Price (100)
6 1/2" FSSWSFP6X1/2 $4.83
3/4" FSSWSFP6X3/4 $7.04
1" FSSWSFP6X1 $7.98
8 3/4" FSSWSFP8X3/4 $10.56
1" FSSWSFP8X1 $11.44
1-1/4" FSSWSFP8X11/4 $12.65
1-1/2" FSSWSFP8X11/2 $13.42
1-3/4" FSSWSFP8X13/4 $17.75
2" FSSWSFP8X2 $17.85
10 1" FSSWSFP10X1 $13.86
1-1/4" FSSWSFP10X11/4 $12.49
1-1/2" FSSWSFP10X11/2 $16.89
1-3/4" FSSWSFP10X13/4 $17.85
2" FSSWSFP10X2 $20.69
2-1/2" FSSWSFP10X21/2 $32.55
12 1-1/2" FSSWSFP12X11/2 $23.10
1-3/4" FSSWSFP12X13/4 $31.50
2" FSSWSFP12X2 $28.35
2-1/2" FSSWSFP12X21/2 $51.45
3" FSSWSFP12X3 $49.35
14 1-3/4" FSSWSFP14X13/4 $36.75
2" FSSWSFP14X2 $50.61
2-1/2" FSSWSFP14X21/2 $40.95
3" FSSWSFP14X3 $60.06
JD Tech Team:
Peter Winne
Specializing in wooden boats/repairs,
paints, varnish, screws & glues
{ 40 years in industry }
Speak to our advisors at 800-423-0030
Single Auger Point Deck Screws
Square Drive Flat Head
18-8 stainless steel
Excellent for outdoor applications.
Self Drilling Type 17 Auger points
are great for pressure treated
lumber & other decking materials.
Size Item # Price (100)
6x1-1/4 FSSQC6X11/4 $5.57
6x1-5/8 FSSQC6X15/8 $6.83
8x1-1/4 FSSQC8X11/4 $7.78
8x1-5/8 FSSQC8X15/8 $8.55
8x2 FSSQC8X2 $11.76
8x2-1/4 FSSQC8X21/4 $9.45
8x2-1/2 FSSQC8X21/2 $12.50
8x3 FSSQC8X3 $16.59
10x2-1/2 FSSQC10X21/2 $18.48
10x3 FSSQC10X3 $19.11
10x3-1/2 FSSQC10X31/2 $21.21
10x4 FSSQC10X4 $28.98
Wood Screws - Slotted
18-8 stainless steel
Flat Head
These marine grade wood screws
provide excellent corrosion
resistance and are the work horse
for modern boatbuilding or exterior
woodworking applications.
Size Length Part # Price (100)
6 1/2" FSSWSFH6X1/2 $6.62
3/4" FSSWSFH6X3/4 $7.35
1" FSSWSFH6X1 $10.71
1-1/4" FSSWSFH6X11/4 $13.13
1-1/2" FSSWSFH6X11/2 $16.70
8 1/2" FSSWSFH8X1/2 $11.34
3/4" FSSWSFH8X3/4 $11.55
1" FSSWSFH8X1 $12.81
1-1/4" FSSWSFH8X11/4 $14.18
1-1/2" FSSWSFH8X11/2 $16.91
1-3/4" FSSWSFH8X13/4 $25.20
2" FSSWSFH8X2 $20.48
10 3/4" FSSWSFH10X3/4 $18.90
1" FSSWSFH10X1 $18.06
1-1/4" FSSWSFH10X11/4 $22.06
1-1/2" FSSWSFH10X11/2 $22.47
1-3/4" FSSWSFH10X13/4 $36.86
2" FSSWSFH10X2 $41.06
2-1/2" FSSWSFH10X21/2 $40.32
3" FSSWSFH10X3 $39.27
12 1-1/4" FSSWSFH12X11/4 $30.45
1-3/4" FSSWSFH12X13/4 $30.45
2" FSSWSFH12X2 $36.75
2-1/2" FSSWSFH12X21/2 $36.75
3" FSSWSFH12X3 $42.74
14 1" FSSWSFH14X1 $75.08
1-1/2" FSSWSFH14X11/2 $38.85
2" FSSWSFH14X2 $50.40
2-1/2" FSSWSFH14X21/2 $50.40
3" FSSWSFH14X3 $52.92
4" FSSWSFH14X4 $109.41
316 Stainless for the
Ultimate Corrosion Resistance!
316 Stainless
Single Auger Point
Deck Screws
Square drive, bugle head. 316 Stainless
Steel. Excellent corrosion resistance for
outdoor or marine applications.
Size Length Part # Price (100)
6 1-1/4” FSS6QC6X11/4 $28.35
6 1-5/8” FSS6QC6X15/8 $14.49
8 1-5/8” FSS6QC8X15/8 $18.27
8 2” FSS6QC8X2 $45.15
8 2-1/4” FSS6QC8X21/4 $23.10
8 2-1/2” FSS6QC8X21/2 $27.93
8 3” FSS6QC8X3 $66.36
10 1-5/8” FSS6QC10X15/8 $45.78
10 2” FSS6QC10X2 $62.95
10 2-1/2” FSS6QC10X21/2 $35.34
10 3” FSS6QC10X3 $76.65
10 3-1/2” FSS6QC10X31/2 $53.99
18
Many more fastener styles & sizes available at Jamestowndistributors.com

We have always carried the hard to find fasteners
Carriage Bolts
18-8 stainless steel
Prices shown are for a box of 100.
Single-piece pricing is available -- call for pricing.
Size Length Part # Price
1/4~20 1-1/2" FSSCB14X11/2 $22.05
2" FSSCB14X2 $32.55
2-1/4" FSSCB14X21/4 $33.60
2-1/2" FSSCB14X21/2 $34.65
3" FSSCB14X3 $36.23
3-1/2" FSSCB14X31/2 $38.12
4" FSSCB14X4 $45.89
4-1/2" FSSCB14X41/2 $48.41
5" FSSCB14X5 $52.50
6" FSSCB14X6 $56.91
8" FSSCB14X8 $727.65
5/16~18 1-1/2" FSSCB516X11/2 $33.71
2" FSSCB516X2 $45.15
2-1/2" FSSCB516X21/2 $47.25
3" FSSCB516X3 $58.80
3-1/2" FSSCB516X31/2 $57.54
4" FSSCB516X4 $85.58
5" FSSCB516X5 $118.97
6" FSSCB516X6 $107.52
3/8~16 1-1/2" FSSCB38X11/2 $47.46
2" FSSCB38X2 $48.30
2-1/2" FSSCB38X21/2 $77.70
3" FSSCB38X3 $94.50
3-1/2" FSSCB38X31/2 $95.55
4" FSSCB38X4 $116.55
4-1/2" FSSCB38X41/2 $93.45
5" FSSCB38X5 $150.15
5-1/2" FSSCB38X51/2 $131.04
6" FSSCB38X6 $183.75
7" FSSCB38X7 $323.40
1/2~13 3" FSSCB12X3 $149.94
3-1/2" FSSCB12X31/2 $147.84
4" FSSCB12X4 $171.78
6" FSSCB12X6 $300.30
8" FSSCB12X8 $1123.50
Hex Nuts
18-8 stainless steel
Size Part # Price (100)
4~40 FSSHN440 $2.63
6~32 FSSHN632 $2.31
8~32 FSSHN832 $2.52
10~24 FSSHN102 $4.03
12~24 FSSHN122 $6.91
Cap Nuts (Acorn)
18-8 stainless steel
Size Part # Price (100)
6~32 FSSAN632 $13.23
8~32 FSSAN832 $15.44
10~24 FSSAN102 $22.87
10~32 FSSAN103 $20.90
12~24 FSSAN122 $78.54
1/4~20 FSSAN14 $13.86
5/16~18 FSSAN516 $23.94
3/8~16 FSSAN38 $33.18
7/16~14 FSSAN716 $216.30
1/2~13 FSSAN12 $126.06
5/8~11 FSSAN58 $762.30
3/4~10 FSSAN34 $681.45
Flat Washers 18-8 stainless steel
Size OD Part # Price (100)
4 0.312 FSSFW4 $5.25
6 3/8 FSSFW6 $1.85
8 3/8 FSSFW8 $5.70
10 7/16 FSSFW10 $4.00
12 9/16 FSSFW12 $7.35
1/4 5/8 FSSFW14 $2.10
5/16 3/4 FSSFW516 $11.55
3/8 7/8 FSSFW38 $4.94
7/16 FSSFW716 $12.71
1/2 1-1/4 FSSFW1/2 $15.33
5/8 1-1/2 FSSFW58 $30.14
3/4 1-7/8 FSSFW34 $53.55
7/8 2 FSSFW78 $64.89
1 2 FSSFW1 $57.75
1-1/8 2-1/2 FSSFW118 $159.99
Fender Washers 18-8 stainless steel
Size OD Part # Price (100)
10 11/16 FSSNW10X11/16 $4.03
10 1 FSSNW10X1 $6.70
1/4 3/4 FSSNW14X3/4 $5.88
1/4 1 FSSNW14X1 $10.29
1/4 1-1/4 FSSNW14X11/4 $14.70
5/16 1-1/2 FSSNW516X11/2 $21.84
3/8 1 FSSNW38X1 $6.72
3/8 1-1/2 FSSNW38X11/2 $17.22
3/8 2 FSSNW38X2 $34.65
1/2 2 FSSNW1/2X2 $36.12
1 2-1/2 FSSNW1X21/2 $141.75
Fasteners
Lock Nuts
18-8 stainless steel (Nylon)
Size Part # Price (100)
4~40 FSSLN440 $3.00
6~32 FSSLN632 $3.68
8~32 FSSLN832 $4.94
10~24 FSSLN102 $5.12
12~24 FSSLN122 $9.03
1/4~20 FSSLN14 $8.91
5/16~18 FSSLN516 $9.43
3/8~16 FSSLN38 $19.43
7/16~14 FSSLN716 $28.04
1/2~13 FSSLN12 $52.71
5/8~11 FSSLN58 $79.80
3/4~10 FSSLN34 $171.47
7/8~9 FSSLN78 $733.66
Lock Washers 18-8 stainless steel
Size Part # Price (100)
2 FSSLW2 $6.45
6 FSSLW6 $9.75
8 FSSLW8 $4.80
10 FSSLW10 $5.39
12 FSSLW12 $5.40
1/4 FSSLW14 $7.25
5/16 FSSLW516 $8.40
3/8 FSSLW38 $8.55
7/16 FSSLW716 $10.29
1/2 FSSLW1/2 $11.76
5/8 FSSLW58 $24.99
3/4 FSSLW34 $52.92
800.423.0030
19

Wood Screws - Frearson Flat Head
Frearson Drive wood screws appear similar to the Phillips
head but the Frearson has a more pointed 75º V shape.
Traditional boatbuilders love these Silicon Bronze wood
screws because they have cut threads and the full-bodied
diameter shank. Unlike rolled thread screws with their
reduced shank--these screws have a shank diameter that is
the same size as the outside of the threads. This completely
fills the clearance hole drilled for the shank thus creating a
waterproof seal.
Size-Length-Part # Price (100)
6 1/2" FSBWSFP6X1/2 $6.09
3/4" FSBWSFP6X3/4 $16.06
1" FSBWSFP6X1 $17.85
1-1/4" FSBWSFP6X11/4 $19.95
1-1/2" FSBWSFP6X11/2 $26.25
8 1/2" FSBWSFP8X1/2 $9.14
5/8" FSBWSFP8X5/8 $14.24
3/4" FSBWSFP8X3/4 $17.56
7/8" FSBWSFP8X7/8 $18.77
1" FSBWSFP8X1 $21.76
1-1/4" FSBWSFP8X11/4 $27.17
1-1/2" FSBWSFP8X11/2 $30.45
1-3/4" FSBWSFP8X13/4 $39.16
2" FSBWSFP8X2 $40.46
2-1/2" FSBWSFP8X21/2 $41.16
10 3/4" FSBWSFP10X3/4 $26.25
1" FSBWSFP10X1 $33.60
1-1/4" FSBWSFP10X11/4 $42.90
1-1/2" FSBWSFP10X11/2 $43.34
1-3/4" FSBWSFP10X13/4 $50.36
2" FSBWSFP10X2 $54.76
2-1/2" FSBWSFP10X21/2 $66.44
3" FSBWSFP10X3 $82.32
12 1" FSBWSFP12X1 $35.91
1-1/4" FSBWSFP12X11/4 $48.40
1-1/2" FSBWSFP12X11/2 $39.38
1-3/4" FSBWSFP12X13/4 $58.80
2" FSBWSFP12X2 $59.62
2-1/2" FSBWSFP12X21/2 $98.70
3" FSBWSFP12X3 $107.80
14 1-1/2" FSBWSFP14X11/2 $78.12
1-3/4" FSBWSFP14X13/4 $80.12
2" FSBWSFP14X2 $92.40
2-1/2" FSBWSFP14X21/2 $111.26
3" FSBWSFP14X3 $160.60
Wood Screws - Slotted Flat Head
Silicon bronze is the traditional choice for marine construction.
It is corrosion resistant, helps prevent rot around the screw
holes when used under water and is relatively strong. Although
stronger than Solid Brass, Silicon Bronze screws are not as
strong as Steel & require a carefully sized pilot hole to avoid
breakage. We recommend drilling twice (once for the root
& once for the shank) as well as using Ackempucky Screw
lubricant to avoid breakage. All screws longer than 1” are
threaded for 2/3 of the shank.
Size-Length-Part # Price (100)
6 1/2" FSBWSFH6X1/2 $10.08
5/8" FSBWSFH6X5/8 $11.72
3/4" FSBWSFH6X3/4 $12.16
7/8" FSBWSFH6X7/8 $16.59
1" FSBWSFH6X1 $17.22
1-1/4" FSBWSFH6X11/4 $15.23
1-1/2" FSBWSFH6X11/2 $20.52
8 1/2" FSBWSFH8X1/2 $14.78
5/8" FSBWSFH8X5/8 $12.81
3/4" FSBWSFH8X3/4 $17.14
7/8" FSBWSFH8X7/8 $19.03
1" FSBWSFH8X1 $23.30
1-1/4" FSBWSFH8X11/4 $24.16
1-1/2" FSBWSFH8X11/2 $39.50
1-3/4" FSBWSFH8X13/4 $29.61
2" FSBWSFH8X2 $40.95
2-1/2" FSBWSFH8X21/2 $41.90
9 1-1/2" FSBWSFH9X11/2 $34.56
10 3/4" FSBWSFH10X3/4 $25.54
7/8" FSBWSFH10X7/8 $20.90
1" FSBWSFH10X1 $32.55
1-1/4" FSBWSFH10X11/4 $37.62
1-1/2" FSBWSFH10X11/2 $49.06
1-3/4" FSBWSFH10X13/4 $56.76
2" FSBWSFH10X2 $54.18
2-1/4" FSBWSFH10X21/4 $54.86
2-1/2" FSBWSFH10X21/2 $72.68
3" FSBWSFH10X3 $55.02
12 3/4" FSBWSFH12X3/4 $29.40
1" FSBWSFH12X1 $41.90
1-1/4" FSBWSFH12X11/4 $36.12
1-1/2" FSBWSFH12X11/2 $70.40
1-3/4" FSBWSFH12X13/4 $65.21
2" FSBWSFH12X2 $73.48
2-1/4" FSBWSFH12X21/4 $58.80
2-1/2" FSBWSFH12X21/2 $86.47
3" FSBWSFH12X3 $117.18
3-1/2" FSBWSFH12X31/2 $95.55
14 1" FSBWSFH14X1 $67.20
1-1/4" FSBWSFH14X11/4 $77.62
1-1/2" FSBWSFH14X11/2 $81.40
1-3/4" FSBWSFH14X13/4 $96.60
2" FSBWSFH14X2 $136.40
2-1/4" FSBWSFH14X21/4 $100.32
2-1/2" FSBWSFH14X21/2 $108.90
3" FSBWSFH14X3 $144.69
3-1/2" FSBWSFH14X31/2 $143.49
4" FSBWSFH14X4 $178.08
16 1-1/4" FSBWSFH16X11/4 $72.88
1-1/2" FSBWSFH16X11/2 $72.45
2" FSBWSFH16X2 $124.99
2-1/4" FSBWSFH16X21/4 $125.16
2-1/2" FSBWSFH16X21/2 $134.40
3" FSBWSFH16X3 $149.94
3-1/2" FSBWSFH16X31/2 $186.27
4" FSBWSFH16X4 $248.33
20
JD Photo Contest Finalist: Katherine Richmond refastening a Swampscott Dory

Heavy Hex Nuts
Silicon bronze
Size Part # Price (100)
1/4~20 FSBHNH14 $45.15
5/16~18 FSBHNH516 $55.65
3/8~16 FSBHNH38 $99.75
1/2~13 FSBHNH12 $201.60
5/8~11 FSBHNH58 $658.35
3/4~10 FSBHNH34 $831.60
1~8 FSBHNH1 $4134.99
Hex Nuts
Silicon bronze (Machine Screw Nuts)
Size Part # Price (100)
6~32 FSBHN632 $9.66
8~32 FSBHN832 $12.57
10~24 FSBHN102 $14.28
10~32 FSBHN103 $10.71
1/4~20 FSBHN14 $16.39
5/16~18 FSBHN516 $40.11
3/8~16 FSBHN38 $33.18
7/16~14 FSBHN716 $82.95
1/2~13 FSBHN12 $83.16
5/8~11 FSBHN58 $247.99
3/4~10 FSBHN34 $485.10
Fasteners
Flat Washers
Silicon bronze
Size Part # Price (100)
6 FSBFW6 $5.31
8 FSBFW8 $6.07
10 FSBFW10 $7.88
12 FSBFW12 $8.82
1/4 FSBFW14 $18.33
5/16 FSBFW516 $40.32
3/8 FSBFW38 $41.73
7/16 FSBFW716 $78.54
1/2 FSBFW1/2 $149.00
5/8 FSBFW58 $173.99
3/4 FSBFW34 $346.50
Lock Washers
Silicon bronze
Size Part # Price (100)
8 FSBLW8 $2.94
10 FSBLW10 $2.94
1/4 FSBLW14 $9.24
5/16 FSBLW516 $16.52
3/8 FSBLW38 $20.16
1/2 FSBLW1/2 $47.25
Finish Washers
Silicon bronze
Size Part # Price (100)
6 FSBCW6 $7.35
8 FSBCW8 $9.82
10 FSBCW10 $10.71
14 FSBCW14 $19.64
We cannot fit all of
our fasteners here.
Call or visit us online.
Ross, laying deck at Gannon & Benjamin Marine
Carriage Bolts
Silicon bronze
Carriage bolts are designed for through-bolting where the
square neck is used to keep the bolt from turning as a nut
is tightened on the other end. These carriage bolts are
priced by the 100 (industry practice) but sold by the each.
Domestic with shoulder
Size Length Part # Price (100)
1/4~20 4-1/2" FSBCB14X41/2 $756.00
5" FSBCB14X5 $843.99
6" FSBCB14X6 $781.00
7" FSBCB14X7 $998.99
8" FSBCB14X8 $947.99
5/16~18 4" FSBCB516X4 $900.90
4-1/2" FSBCB516X41/2 $945.99
5" FSBCB516X5 $1016.40
5-1/2" FSBCB516X51/2 $945.00
6" FSBCB516X6 $1270.50
7" FSBCB516X7 $1228.50
8" FSBCB516X8 $1374.45
9" FSBCB516X9 $1443.75
3/8~16 4" FSBCB38X4 $1166.55
5" FSBCB38X5 $1071.00
5-1/2" FSBCB38X51/2 $1102.50
6" FSBCB38X6 $1170.00
7" FSBCB38X7 $1270.50
8" FSBCB38X8 $1365.00
9" FSBCB38X9 $1449.00
10" FSBCB38X10 $1501.50
1/2~13 2-1/2" FSBCB12X21/2 $852.60
3" FSBCB12X3 $588.00
3-1/2" FSBCB12X31/2 $575.40
4" FSBCB12X4 $1354.50
5" FSBCB12X5 $1628.55
6" FSBCB12X6 $1911.00
7" FSBCB12X7 $1879.50
8" FSBCB12X8 $2089.50
10" FSBCB12X10 $3014.55
12" FSBCB12X12 $3204.60
14" FSBCB12X14 $4596.90
Jamestowndistributors.com 800.423.0030
21

Excellent for
preparing bare wood
for varnish or paint!
CPES Penetrating Epoxy Sealer
Clear Coat Epoxy
·Clear Coat epoxy resin is a very low
viscosity (thin), almost colorless epoxy
system. Unlike the penetrating epoxies,
Clear Coat contains no solvent. Allowing it
to be a much stronger system when cured
compared to the penetrating epoxies
with better moisture resistance. Use as a
primer base for varnish.
Kit Size Item # Price
1.5 Pint kit* STR-130601 $35.99
3 Quart kit* STR-130603 $114.99
1.5 Gal kit* STR-130604 $199.99
Sale
CPES (right) uses solvents
to thin the epoxy helping
it to migrate into the wood
fibers. Standard epoxy
(left) is thicker & will setup
on top of the wood without
penetrating very deeply.
·Penetrates and saturates wood with a premium epoxy resin. A
tough, flexible resin system in a solvent blend that can be used to
aid in the restoration of rotted wood. CPES is effective because
it contains a special blend of solvents that penetrate deep into
wood cellulose and fibers -- allowing the epoxy to chemically
adhere and strengthen the wood. Mixes 1:1 Use Cold Formula
from 28-65 degrees F and Warm Formula from 50-86 degrees F.
Type Size Regular SALE
Cold or Warm 2 pt $37.17 $32.99
Cold or Warm 2 qt $65.99 $56.99
Cold or Warm 2 gal $229.99 $192.99
Six10 Thickened Epoxy Adhesive
·Six10 is a thickened epoxy adhesive that combines
the strength and reliability of a two-part epoxy with the
convenience of a single part formula. Easy to apply with
a standard caulking gun. Colorless resin and hardener.
Cartridge contains 190ml of resin & hardener. Includes one
mixing nozzle. Additional nozzles sold separately.
This is the
convenient,
no-waste way
to apply epoxy
WSY-610
Only $ 22 30
Reusable Mixing Sticks
·These practical mixing sticks have found
many places in our workshop and we
believe they will in yours, too. The squared,
beveled end reaches into the square corners
of your mixing pots for thorough mixing of epoxy. The
opposite end of the tool is rounded. 3/4”-wide x 5-1/2”.
WSY-804-8
8 sticks
$280
G5 - 5 Minute Epoxy
·G 5 Five Minute epoxy adhesive is an
easy to use, 2 part resin and hardener
system. G/5 is great for general bonding
and quick repairs. One to one mix ratio,
no pumps or metering required. Cures in
3 to 5 minutes.
Size Item # Price
4 oz WSY-865-4 $19.95
16 oz WSY-865-16 $54.18
“Fantastic”
System Three Clear Coat Epoxy
“I used this to glass my cedar strip kayak. It’s so thin
I just layed out my three layers and then poured it
on, it wet right out. I did have trouble with runs since
it is so thin, BUT it is a dream to sand. It is perfect for
clear coating finished wood.”
Read hundreds of reviews like this online!
G/Flex Liquid Epoxy
·G/flex epoxy is resilient enough to bond
dissimilar materials & flexible enough
to absorb the stress of expansion,
contraction, shock and vibration. Includes
resin & hardener.
Size Item # Price
8 oz WSY-650-8 $20.19
32 oz WSY-650-32 $59.99
22
See all of our Epoxy Supplies at Jamestowndistributors.com

“Excellent,
Easy to Use”
MAS Low Viscosity Epoxy Resin
“I’m on my 3rd small boat, two strip built
and one lap strake. This product is easy to
use, has excellent technical resources, and
very limited smell.”
Epoxy
MAS Low Viscosity Resin
·MAS is a single-system solution for all of your epoxy needs. The Low viscosity resin is an easy-flowing reliable system with low
drip and no blush. Formulated with an easy 2:1 mix ratio. Use for barrier coatings, laminating, and bonding. MAS epoxy provides
complete wet out of fiber reinforced fabrics, reducing the potential for voids and other imperfections. Modify with fillers such as
wood powder of colloidal silica for filling and fairing compound applications.
MAS epoxy won’t blush as long as it is applied in anything under 98% humidity.
Resins Item # Size Description MSRP
Low Viscosity Resin MAS-30-001 1 qt The MAS workhorse epoxy. $36.99
MAS-30-005 0.5 gal Use for barrier coatings, laminating, $67.99
MAS-30-002 1 gal and bonding. $112.99
MAS-30-003 4 gal $349.99
Pump Set
·MAS pumps mount directly
on the resin and hardener
containers, eliminating the
mess involved with measuring
by weight or volume. They are
calibrated to deliver the proper
working ratio with one full pump
stroke of resin for each one full
pump stroke of hardener.
MAS-30-016
Only $ 15 99
Fast Hardener
·MAS Fast Hardener is a Non-Blushing room temperature
rapid hardener for use with MAS Epoxy Resins. The superior
bonding strength of Fast makes it ideal for high strength
secondary bonding applications such as structural tabbing and
repair of laminations. The rapid cure time of Fast will have a
pot life of 7 minutes, a set time in 2 hours and allows overnight
curing in low temperature conditions.
Size Item # Price
Pint MAS-30-611 $29.99
Quart MAS-30-612 $46.99
1/2 Gallon MAS-30-625 $89.99
Gallon MAS-30-613 $199.99
Medium Hardener
·MAS Epoxy medium hardener is a polyamine blend
intended for moderate activity and resistance to blushing.
Moderate pot life gel of about 12 minutes and thin film set
times of about 3 hours provide advantages when filleting
and fairing. This hardener is a good choice when overnight
sandability is more important than continuous laminating
and open time. Won’t ‘milk out’ during application or fog up
in critical clear coating applications.
Size Item # Price
Pint MAS-30-516 $29.99
Quart MAS-30-532 $48.99
1/2 Gallon MAS-30-564 $89.99
Gallon MAS-30-510 $199.99
Slow Hardener
·MAS Slow hardener is formulated for use with MAS epoxy
resins and can be applied in a wide range of conditions
where increased working time is required. We highly
recommend MAS Slow Hardener when coating or laminating
large surfaces. The Slow formulation cures blush free and
eliminates the need for time consuming wash downs during
on-going laminations or repetitive build coats.
Size Item # Price
Pint MAS-30-006 $29.99
Quart MAS-30-007 $49.99
1/2 Gallon MAS-30-026 $89.99
Gallon MAS-30-008 $159.99
800.423.0030 23

105 Epoxy Resin
·The industry standard for
boatbuilding and repair projects. 105
Epoxy resin is the base material on
which all of the line’s compounds
are built. The resin is a clear, pale
amber, low viscosity liquid epoxy for
use with WEST hardeners.
100 % Price
Match
Guarantee
We are WEST System Epoxy experts -
call us with your questions.
Hardener Needed Pump Mix
Resins Item# Size MAP Slow Fast Coating Tropical Needed Viscosity Ratio
105 Epoxy Resin WSY-105A 1 qt $38.93 WSY-206A WSY-205A WSY-207A WSY-209A WSY-300 1000 cps 5:1
WSY-105B 0.98 gal $98.26 WSY-206B WSY-205B WSY-207B WSY-209B WSY-300 1000 cps 5:1
WSY-105C 4.35 gal $390.80 WSY-206C WSY-205C WSY-207C WSY-209C WSY-300 1000 cps 5:1
300 Mini Pump Set
·300 Mini Pumps provide accurate
metering of all Size A, B and C West
System epoxy resin and hardeners.
Calibrated to deliver the proper working
ratio, this set includes one resin pump
and two hardener pumps.
WSY-300
Set
$1452
205 Fast Hardeners
·205 Fast Hardener is a low-viscosity epoxy
curing agent for use when shorter working and
cure time is needed or to provide adequate
working time at cooler temperatures. Not
intended for clear coating.
WSY-205A
Pints
$2010
207 Special Clear Hardener
·207 Special Clear Hardener was
especially developed for coating
applications where an exceptionally clear
moisture-resistant natural wood finish is
desired. UV inhibiting additive improves
resistance, but still requires further UV
protection. 207 is designed to self level
for smooth finishes and to wet-out and
bond fabrics. Although it provides good
physical properties for general bonding
applications, it is more difficult to thicken
and less cost effective for this purpose
than 205 or 206 hardeners.
WSY-207A
0.66 pt
$3815
206 Slow Hardeners
·206 Slow Hardener is a low-viscosity
epoxy curing agent for use when extended
working and cure time is needed or to provide
adequate working time at higher temperatures.
Not intended for clear coating applications.
WSY-206A
0.44 pt
$2010
Ask for your
Free WEST System
Users Manual
24
Jamestowndistributors.com

Your source for WEST SYSTEM Epoxy
406 Colloidal Silica
·406 is a very strong filler that creates a smooth
mixture ideal for general bonding and filleting. It is
our most versatile filler.
1.7 oz
$1085
Epoxy Spreaders Single Edge
·These single edge spreaders
are useful for applying epoxies
and other gel coats at a
constant rate.
GER-030001 4”x2-1/2”
5 per pack
$376
Epoxy
407 Low Density Filler
·407 Low-Density filler is a blended microballoonbased
filler used to make fairing putties that are
easy to sand or carve. Reasonably strong on a
strength-to-weight basis. Cures to a dark red/
brown color.
4 oz
2 oz
15.2 oz
$1652
410 Microlight Filler
·410 Microlight is the ideal low-density filler for
creating a light easily-worked fairing compound
especially suited for fairing large areas. Cures to
a tan color.
$1569
404 High Density Filler
·404 High-Density filler is an epoxy thickening
additive developed for maximum physical
properties in hardware bonding. Can be used for
filleting and gap filling. Color: off-white.
$1418
Epoxy Syringes
·Reusable syringes that can be loaded with epoxy
mixture for injecting into tight spots. The 14cc
syringe from West System has a slight curve in
the tip to improve application. The longer 60cc
syringe has a straight tip. Min 5/pack.
Size Item # Each
14cc WSY-807 $0.70
60cc KEN-160157 $0.69
WEST 8002 Roller Covers
·These roller covers are a high
density polyurethane foam ideal
for epoxy applications. Can be
cut into shorter lengths to match
the application area. Covers are
7” wide. 2/pack. Yellow.
2 pack
$598
Tongue Depressors
·Tongue depressors are great for stirring &
applying small amounts on sample areas.
Box of 500 13
$ 98
403 Microfibers Adhesive Filler
·403 Microfibers, a fine fiber blend, is used as a
thickening additive with resin/hardener to create
a multi-purpose adhesive especially for bonding
wood. Color: off-white.
6 oz
$1065
Brushes - Acid, Epoxy, Glue
·These natural bristle acid or glue brushes have
crimped metal handles. The perfect size for small
glue jobs. Brush head is 3/8”.
Pack/12 $5.31
Box/144 $23.64
Pack
$531
Call Jamestown for Expert Advice at 800.423.0030
25

Fiberglass Biaxial Cloth
E-glass Biaxial (+/-45 degree)
Cloth with 3/4 oz mat backing.
38” wide.
·Held together by light stitching.
·Print-thru and higher stiffness
than woven fabrics.
·Ideal for repairs, tabbing, and
reinforcing.
Length Item Price
3 yd FIB-967 $35.28
10 yd FIB-968 $98.00
25 yd FIB-969 $176.40
90 yd FIB-908 $529.20
Fiberglass Cloth Tape
·Reinforcement for edges and
corners. Avoid fraying when
narrow strips are needed.
Tapes saturate easily. 8.7 oz
fabric. Plain weave. Other sizes
available.
Width Length Item # Price
2” 10 yd FIB-913 $6.79
2” 50 yd D232 $48.99
3” 10 yd FIB-915 $9.28
3” 50 yd D233 $28.99
4” 10 yd FIB-927 $12.13
4” 50 yd D234 $48.99
6” 10 yd FIB-929 $17.27
6” 50 yd D235 $76.99
Biaxial Cloth Tape
·E-glass Biaxial (+/-45) Cloth
tape with 3/4 oz mat backing.
Held together by light stitching.
Biaxial tape is ideal for repairs,
tabbing, and reinforcing. 4” rolls
available. 17oz weight.
Width Length Weight Item # Price
6" 15 yd 17 oz FIB-973 $31.59
6" 45 yd 17 oz FIB-974 $80.19
6" 90 yd 17 oz FIB-909 $131.22
Chopped Strand Mat
1.5 oz.
·Mat can be used alone or
in conjunction with fiberglass
fabrics in larger fabrications.
Polyester is the preferred resin
for Chopped Strand. 1.5 oz./sq
ft. Other weights available.
Size Length Item # Price
38" 1 yd FIB-940 $5.20
38” 3 yd FIB-942 $11.71
38” 10 yd FIB-938 $33.83
38” 25 yd FIB-939 $71.56
26
Jamestowndistributors.com
Laying dynel at Gannon & Benjamin Marine