CARVA NEW - Home Style sro

Media accessories for lowboards – for 55.0 cm depth
Integrated multiple plug with automatic cut-off
with central switch;
can be fitted in lowboard optionally left (L) or right (R);
please state clearly in the order!
List of versions: see page 87
Switch
Mains connection LED Main socket Switchable sockets
Adjuster
L
Key connection
Permanent
current
Master
Slaves
Main unit
Peripheral units
Automatic cut-off:
Cut-off: single pole
Power: 16A/3680W
Protected range: IP20
Operating power: 195-265 VAC
Ready: 35 secs after pressing switch
Holding current: min. 0.070A, max. 0.860A
Power consumption standby: 0W,
independent of load
Power consumption electronics: 1.25W
Temperature: -5°C to +40°C
Material: PA6 GF30 V1, filament tested
up to 850°C
Profile: eloxised alum., no HE
Colour: black
Dimensions: 486x52x44 mm
Connection:
Current: input/output GST18/3i connector
systems
1x key connection with 0.5m
H05WF2x0.75mm² black with connecting
plug GSt15i2 black
Socket:
Protected plug acc. to DIN 49 440, tested
acc. to: VDE0620-1
Twin-pole with protected plug 16A/3680W,
250 VAC
1x grey (permanent current), 1x black
(master), 3x black (slave) turned through 35°
Operating method:
The automatic cut-off is an automatic break in the current for several units. Connect any media
unit with an ON/OFF switch to the main socket and the other units to the switchable sockets. The
device goes into operation on connecting the main unit. The electronics are activated by pressing
the switch. If the unit connected to the main socket is not switched on within 35 seconds, the
automatic cut-off comes into operation electronically.
Example: A TV set is connected to the main socket and the peripheral units such as video recorders,
DVD players, home cinema units or satellite receivers are connected to the extra sockets.
When you switch on the TV set, all peripheral units are switched on automatically. You can use the
permanent current socket for units which require permanent current (fax, telephone, hard disk
units, etc).
281 L
282 R
-
Cable aperture K1
Silver-coloured; Ø 8.0 cm;
It is possible to fit a cable aperture in the top end
shelf of the lowboards and single units up to a
height of 58.8 cm.
The cable aperture is possible in the rear section
of the top end shelf (not possible in top glass
sections).
Positioned in centre of compartment. Distance
from centre of hole to rear rim of unit: 14.0 cm
K1
-
Cable aperture K7
Silver coloured; 7.0 x 12.0 cm;
It is possible to fit a cable aperture in the top end
shelf of the lowboards.
Positioned in centre of compartment, flush with
rear rim of unit.
112
E
K7
-
E Wohnen: CARVA Seite 112 8. 2012