Installing and Configuring Intermec Device Types for SAP (PDF)

More documents

Recommendations

Info

Configuring an Intermec Output Device This section describes how to create and configure an Intermec device using the Device Type Printer Wizard. Import of Intermec device types and driver should be completed prior to this step as described in previous sections of this document. 5. Enter the Output Device name, the Short name and click on the Wizard icon 1. Open Spool Administration (browse or type “SPAD” in the transaction code area) 2. Click Display next to Output Devices 3. Click the Change icon 6. From the Device Type Selection Window select “Intermec” from the Manufacturer’s Name drop down box and click the Show Printers button to see the list of available Intermec printers Right-click a printer to select it and then click the Check box 4. Click the Create icon
7. Enter the printer Model and Location as necessary 9. Select the Host Spool Access Method, available methods for Intermec Device Types are: F: Printing on Front End Computer, or G: Front End Printing with Control Tech 8. Click on the Access Method tab 10. Enter “_DEFAULT” in the Host Printer field to route print jobs from the local machine to the default installed printer Checking “No Device Selection at Frontend” will route jobs to the default printer Click the Save icon.
Page 1 and 2: Technology Brief Installing and Con
Page 3: Installing the Transport Package In
Page 7: RFID The following RFID functionali

Installing and Configuring Intermec Device Types for SAP (PDF)

Create successful ePaper yourself

Delete template?

Save as template?