DentoCem - Itena clinical France
DentoCem - Itena clinical France
DentoCem - Itena clinical France
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Temporary cements<br />
Permanent cements<br />
ProviTemp DentoTemp TotalCem <strong>DentoCem</strong><br />
RETENTION<br />
<strong>DentoCem</strong><br />
Resin cement<br />
ADVANTAGES<br />
Bonding strength to dentine > 23MPa<br />
No initial expansion<br />
Not soluble in oral fluids<br />
Superior retention and total margin integrity<br />
Film Thickness (15 µg/mm3), for a perfect<br />
aesthetic result<br />
Dual Cure (Auto/Photo)<br />
Ideal for areas unreachable with the LED curing unit<br />
Cement has a rubbery phase to allow removal<br />
of excess material<br />
Radiopaque<br />
Visual proof (radiography)<br />
Automix syringe and extra fine intra oral tips<br />
Base and catalyst perfectly measured and mixed<br />
Extra fine intra oral tip for precise application and<br />
ease of extrusion into root canal<br />
TECHNICAL DATA<br />
Composition:<br />
Base: Aliphatic polyester urethane acrylate • Hydroxyethyl<br />
methacrylate • Crosslinking monomer • Photoinitiators • Adhesive<br />
accelerator • Glass filler<br />
Catalyst: Triethyleneglycol dimethacrylate • Bis-phenol-A glycidildimethacrylate<br />
• Benzol peroxide • Glass filler<br />
References<br />
<strong>DentoCem</strong><br />
2 syringes of 5ml<br />
+ 10 mixing tips<br />
+ 10 extra fine intra oral tips DCA-2.5<br />
Extra fine intra oral tips<br />
25 mixing tips<br />
+ 25 extra fine intra oral tips DCEXF-25<br />
CLINICAL PROCEDURE<br />
1 2<br />
3<br />
Etch the tooth for 5-10s.<br />
Rinse & dry<br />
Mix equal drops of Iperbond<br />
& Iperbond Activator<br />
Apply the mixture to the damp<br />
dentine and leave undisturbed<br />
for 15s. Remove solvent<br />
with the air spray.<br />
Photo-polymerize for 20s<br />
4<br />
Extrude a thin layer of<br />
<strong>DentoCem</strong> directly into the<br />
restoration<br />
5<br />
Seat the restoration and hold<br />
with gentle pressure until initial<br />
set (approx. 1,5min).<br />
Remove the excess<br />
6<br />
Light-cure margins for 20s<br />
from each direction.<br />
For chemical cure, the setting<br />
time is approximately 3,5min
Temporary cements<br />
Permanent cements<br />
ProviTemp DentoTemp TotalCem <strong>DentoCem</strong><br />
RETENTION<br />
INDICATIONS<br />
Final cementation of<br />
crowns, bridges, inlays, onlays, posts, ceramic crowns<br />
& Maryland bridges<br />
ceramics or metallic orthodontic attachments<br />
implant prosthesis<br />
amalgam restorations<br />
Properties<br />
<strong>DentoCem</strong><br />
Shear bond strength to base alloys<br />
> 43 MPa<br />
Shear bond strength to dentine<br />
> 23 MPa<br />
Flexural strength<br />
106 MPa<br />
Film thickness<br />
15 µg/mm³<br />
Solubility<br />
4,5 µg/mm³<br />
Water sorption<br />
3,4 µg/mm³<br />
Shelf Life<br />
2 years<br />
Working time 1 min 30<br />
Setting time 3 min 30