MD. ABU RAIHAN - Islamic University of Technology

E-mail: maraihan.iut@gmail.com
Mobile: 0088- 01718-040307
Residential Address:
House No.: 01 “Khonika” (2nd Floor) Road No.01,
Station Bargachha, Boramore,
Post Office and District: Natore: 6400
Bangladesh.
Resume
MD. ABU RAIHAN
Official Address:
Assistant Professor
Department of,
Instructor Training and General Studies (ITS)
Islamic University of Technology (IUT)
The Organisation of the Islamic Conference (OIC)
Board Bazar, Gazipur 1704, Bangladesh, Web site: www.iutoic-dhaka.edu
OBJECTIVE
To make the Career as a Faculty in a Technical University and participate in advance research activities in
the concerned field and to perform responsibility for growth and sustainable development of the world
WORK EXPERIENCE
From 22 May 2007 till Now
Employer
: Islamic University of Technology (IUT)
Position Held
: Assistant Professor
Department of Instructor Training and General Studies (ITS)
Description of Duties : Teaching, Conducting the short courses, Research.
From 01 December 2004 to 21 May 2007 : Position: Lecturer, Dept. of ITS, IUT.
PERSONAL INFORMATION
Father
Mother
Date of Birth
Religion
Interest
Hobby
: Md. Abdul Wahed
Principal (Rtd), Bagatipara Degree College, Natore
: Ms. Hasina Banue
Head Mistress, Natore Government Boy’s High School, Natore
: 28 February, 1982; Blood Group :‘O’ +ve ; Height: 5′10″ ; Sex: Male
: Islam (Sunni); Marital Status: Unmarried; Nationality: Bangladeshi
: To do the research work in the field of Education
: Gardening, Traveling, Listening Songs and Playing Cricket , Football etc.
AWARD/SCHOLARSHIP
• Awarded OIC FULL FREE SCHOLARSHIP for PGDTE, and M.Sc.T.E. degree 2 years
• Awarded OIC FULL FREE SCHOLARSHIP for B.Sc.Engg.(Mech) 3 years
• Got Higher Secondary Certificate NATORE DISTRICT SCHOLARSHIP (1998-1999)
• Secondary School Certificate NATORE DISTRICT SCHOLARSHIP (1995-1996)
1

EDUCATION DETAILS
2004-2006
Master of Science in Technical Education (M.Sc.T.E.)
(Specialization: Production Engineering.)
From Department of Instructor training and General Studies (ITS)
Islamic University of Technology (IUT)
The Organisation of the Islamic Conference (OIC)
Dhaka, Bangladesh
• CGPA 4.87 out of 5.00
2003-2004
Post Graduate Diploma in Technical Education (P.G.D.T.E.)
(Specialization: Production Engineering.)
From Department of Instructor training and General Studies (ITS)
Islamic University of Technology (IUT)
The Organisation of the Islamic Conference (OIC)
Dhaka, Bangladesh
• First Class First (CGPA 4.74 out of 5.00) (Rank in the Class : 1)
1999-2003
Bachelor of Science in Mechanical Engineering [B.Sc.Engg. (M)]
(Specialization: Production Engineering.)
From Department of Mechanical and Chemical Engineering (MCE)
Islamic University of Technology (IUT)
The Organisation of the Islamic Conference (OIC)
Dhaka, Bangladesh
• First Class (CGPA 3.72 out of 5.00)
1998-1999
Higher Secondary Certificate (H.S.C.)
From N.S. Government College, Natore-6400
• First Division* (Science Group)
• Total mark obtained 788 out of 1000 (78.80%)
• Distinction in Physics and Mathematics.
* Star Marks
1995-1996
Secondary School Certificate (S.S.C.)
From Natore Government Boy's High School, Natore-6400
• First Division (Science Group)
• Total mark obtained 726 out of 1000 (72.60%)
• Distinction in General Mathematics and Agriculture Science.
MAJOR SUBJECTS
• M.Sc.(Tech.Edu.) : (Total 23+25 = 48 Credit) Subjects - ITS 6115 Curriculum
Organization and Development, ITS 6157 Educational Planning, ITS 6159 Educational
Research and Statistics, ITS 6207 Educational Guidance and Counseling, ITS 6233
System Approach in Education, ITS 6224 Seminar on Technical and Vocational
Education for Development, MCE 6131 Quality Assurance, MCE 6243 Engineering
Economics, and ITS 6000 Thesis.
2

• P.G.Dip. (Tech. Edu.) : (Total 19+18 = 37 Credit) Subjects - ITS 5125 Advance
Methods and Techniques of Teaching, ITS 5126 Advance Methods and Techniques of
Teaching Lab ITS 5103 Educational Psychology, ITS 5119 Administration and
Supervision of Technical and Vocational Education, ITS 5211 Philosophy of Education,
ITS 5213 Curriculum Development in Technical and Vocational Education, ITS 5235
Educational Measurement and Evaluation, ITS 5253 Educational Research, ITS 5258
Observations and Practice Teaching Lab, MCE 5127 Advanced Production Process, MCE
5127 Advanced Machine Tools, MCE 5221 Plastic Process Engineering, MCE 5231
Designing for Production, and MCE 5200 Special Studies
RESEARCH AREAS
• For M.Sc.T.E. Thesis (Credit:13.50) on:
“A STUDY OF THE ESSAY TYPE EXAMINATION OF ISLAMIC UNIVERSITY
OF TECHNOLOGY (IUT)”
Supervisor: Prof. Dr. Md. Shahjahan Mian (Tapan), Head Department of ITS & REASP, IUT
Co-Supervisor: Dr.Che Kum Clement, Associate Prof. Department of ITS, IUT
• For P.G.D.T.E.; Project /Thesis on:
“A STUDY OF MECHATRONICS SYSTEM IN AN AUTOMOBILE”
Supervisor: Dr. Md. Nurul Abser Chowdhury, Associate Professor, Department of MCE, IUT
• For B.Sc. Engg. (M); Project / Thesis on:
“DESIGN FABRICATION AND STUDY OF CABINET TYPE SOLAR DRYER”
Supervisor: Prof. Dr. Md. Abdur Razzaq Akhanda Head, Department of MCE, IUT.
PUBLICATIONS
Journal
• Md. Abu. Raihan, Che Kum Clement, Prof. Dr. Shahjahan Tapan and S.H.Khan, “Concept of
IUT Teachers about Assessing Engineering Students’ Learning with Essay Type
Examination: A Case Study”, published in the International Journal of Engineering and
Technology (IJET); vol. 3 Issue. 3 Dec. 2006, ISSN: 1812, 7711
• Md. Abu. Raihan, M. Rahat Hossain and Ondrila Mondal “Young Professionals and
Students’ Involvement in ICT for Poverty Alleviation”, published in the International
Journal of Engineering and Technology (IJET); vol. 4 Issue. 3 Dec. 2007, ISSN: 1812, 7711
• M. Aktarruzzaman, Md. Abu Raihan , Prof. Dr. M. Shahjahan Mian Tapan “ICT to enhance
learning” accepted & will be published in the Journal, School of Education in Bangladesh Open
University (BOU), June 2008
3

Workshop and International Short courses
• Md. Rezaul Karim and Md. Abu Raihan, “An Overview of Curriculum Planning in
Technical and Vocational Education”, An International Workshop on “Curriculum
Development in technical and Vocational Education”, Islamic University of Technology (IUT), 19-
21 Nov. 2006
• Prof. Dr. Shahjahan Tapan and Md. Abu Raihan, “Qualities of a Good Teacher”, An
Orientation Programme of IUT Teachers’ on “Effective Teaching-Learning”, Islamic University of
Technology (IUT), 19-20 February. 2007.
• Shamim Ahmed and Md. Abu Raihan, “Planning a Lesson”, An Orientation Programme of
IUT Teachers’ on “Effective Teaching-Learning”, Islamic University of Technology (IUT), 19-20
February. 2007.
• Prof. Dr. M. Shahjahan Mian Tapan, Md. Abu Raihan, S. Ahmed and M. Aktarruzzaman “ICT in
Teaching-Learning”, An International Workshop on “ICT in Teaching-Learning in Technical
and Vocational Education”, Islamic University of Technology (IUT), 01-05 Dec. 2007
• Prof. Dr. M. Shahjahan Mian Tapan, Md. Abu Raihan, S. Ahmed and M. Aktarruzzaman “ICT
and Distance Education”, An International Workshop on “ICT in Teaching-Learning in
Technical and Vocational Education”, Islamic University of Technology (IUT), 01-05 Dec. 2007
• Prof. Dr. M. Shahjahan Mian Tapan, Md. Abu Raihan, S. Ahmed and M. Aktarruzzaman
“Introduction to E-Learning”, An International Workshop on “ICT in Teaching-Learning in
Technical and Vocational Education”, Islamic University of Technology (IUT), 01-05 Dec. 2007
EXPERIENCE AS A RESOURCE PERSON
• I received a certificate as a resource person in an International Workshop on “ICT in
Teaching-Learning in Technical and Vocational Education”, Islamic University
of Technology (IUT), 01-05 Dec. 2007 (H.E. Dato' Abdul Malek Bin Abdul Aziz, High
Commissioner of Malaysia gave away the certificates to the participants as the Chief
Guest),Participants (19) were from Uganda, Senegal, Sierra Leone, Indonesia,
Pakistan, Mozambique, Nigeria, Brunei Darussalam and Niger.
AFFILIATION
• Associate member of Institution of Engineers Bangladesh (AMIEB No. 8124)
• Member of Bangladesh Society of Mechanical Engineers (MBSME No. 05005)
• Member of IUT Alumni Association (IUTAA No. 990085)
INDUSTRIAL TRAINING EXPERIENCES
As a part of the degree requirement
Organized by the Department of Mechanical and Chemical Engineering (MCE) of IUT
Place
Duration
1. Zia Fertilizer Company Ltd. Ashuganj, B-bariah, Bangladesh (Two weeks)
2. Ashuganj Thermal Power Station, Ashuganj, B-bariah, Bangladesh (Two weeks)
3. Beximco Textile, Beximco Industrial Park, Dhaka, Bangladesh (One week)
• Obtained Grade A+
4

COURSES TAUGHT
Post Graduate Level: ITS 5125 Advanced Methods & Techniques of Teaching, ITS 5126 Advanced
Methods & Techniques of Teaching Lab
Under Graduate Level: ITS 4229 Instructional Technology & Communication Skill, ITS 4230
Instructional Technology and Computer Aided instructional (Lab and Seasonal), ITS 4143 Comparative
Education, ITS 3139 Principles of Technical and Vocational Education, ITS 4472 Technical Report
Writing & Presentation, ITS 3258 Observation & Practice Teaching (Lab), ITS 4549 Social Studies &
Accounting and, and ITS 4251 Sociology of Education
COMPUTER LITERACY
Known operating system, application software:
• Disk operating system (DOS), Microsoft Windows 98, XP, MS Word, MS Excel, MS Power Point
Known programming language:
• Auto CAD Designing, NC Programming, CNC Programming
Known hardware skill:
• Able to assemble computer hardware
• Able to trouble shoot any hardware and software problems.
LANGUAGE PROFICIENCY
Bangla (Mother Tongue) : Very Good
English : Very Good
FIELDS OF INTEREST
• Technology Education • Educational Leadership
REFERENCES
(a) Prof. Dr. Md. Shahjahan Mian (Tapan)
Head, Department of Instructor Training & General
Studies (ITS)
Islamic University of Technology (IUT)
Former Professor of Education, Institute of education &
Research, University of Dhaka,
Board Bazar, Gazipur-1704
Tel: (+88)-02 - 929 1254-9, Ext-3205
Fax: 880-2-929 1260
E-mail: smtapan@iut-dhaka.edu
(b) Prof. Dr. Md. Abdur Razzaq Akhanda
Head, Department of Mechanical and Chemical
Engineering (MCE)
Islamic University of Technology (IUT)
Former, Prof. & Dean of Mechanical Engineering
Faculty (BUET)
Board Bazar, Gazipur-1704
Tel: (+88)-02-9291254-9 Ext-3204
E-mail: akhanda@iut-dhaka.edu
I hereby certify that the above information provided in this resume is correct. I agree that you
may, if necessary, verify details of my educational qualifications and other information provided here. I
am aware of the fact that false information can lead to immediate action or dismissal.
Date:
Md. Abu Raihan
5