13.03.2014 Views

RR18-XXX - Telecontrolli

RR18-XXX - Telecontrolli

RR18-XXX - Telecontrolli

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Radio Receiver<br />

<strong>RR18</strong>-<strong>XXX</strong><br />

Very Low Consumption Super Regenerative Receiver<br />

with Front End SAW Filter - Optional Metal Shield<br />

General description<br />

The <strong>RR18</strong>-<strong>XXX</strong> is a very low consumption super<br />

regenerative data receiver with front end SAW filter.<br />

EMI immunity improved by a metal shield<br />

( <strong>RR18</strong>-<strong>XXX</strong>-S model)<br />

Typical current consumption: 70 uA<br />

Sensitivity typically exceedes -96dBm when matched<br />

to 50 ohm.<br />

Narrow Bandwidth: +/- 300 KHz<br />

<strong>XXX</strong>: custom-specified working frequency<br />

Applications<br />

<br />

<br />

<br />

<br />

Home security systems<br />

Car Alarm systems<br />

Remote gate controls<br />

Sensor reporting<br />

BLOCK DIAGRAM<br />

V CC<br />

V CC<br />

In<br />

SAW RF LP AM<br />

Filter Oscillator Filter Ampli<br />

Comparator<br />

OUT<br />

GND<br />

Quench<br />

Oscillator<br />

GND<br />

Test<br />

Point<br />

GND


Electrical Characteristics<br />

V CC<br />

I S<br />

F W<br />

B W<br />

V ol<br />

V oh<br />

T OP<br />

CHARACTERISTICS MIN TYP MAX UNIT<br />

Supply Voltage<br />

Supply Current<br />

Working Frequency<br />

-3dB Bandwidth<br />

RF Sensitivity (100% AM)<br />

Data Rate<br />

Level of Emitted Spectrum<br />

Low-Level Output Voltage<br />

High-Level Output Voltage<br />

Operating Temperature Range<br />

2.75<br />

Vcc - 0.4<br />

3 3.25 VDC<br />

70<br />

433.92<br />

+/-300<br />

-90 -94<br />

4.8<br />

Ta = 25°C unless otherwise specified<br />

-65 -60<br />

0.4<br />

uA<br />

MHz<br />

KHz<br />

dBm<br />

Kbit/s<br />

dBm<br />

-20 +55 °C<br />

V<br />

V<br />

Pin Description<br />

Mechanical Dimensions<br />

2 GND 11 GND<br />

3 IN 13 Test Point<br />

7 GND 14 OUT<br />

10 +VCC<br />

15 +VCC<br />

16.51mm<br />

40.13mm<br />

5.5mm<br />

2 3 7 10 11 13 15<br />

1mm<br />

2.54mm<br />

TYPICAL APPLICATION<br />

AERIAL<br />

<strong>RR18</strong>-<strong>XXX</strong><br />

1 2 7 10 15<br />

IN<br />

DECODER<br />

OUT<br />

+5V<br />

The resistor R set the level of Squelch Treshold<br />

to reduce the output noise:<br />

R<br />

R = Not Connected<br />

R = 10 Mohm<br />

R = 5.6Mohm<br />

Maximum Sensitivity<br />

Sensitivity Loss -1dB<br />

Sensitivity Loss -3dB<br />

<strong>Telecontrolli</strong> Srl has an on going policy to improve the performance and reliability of their products; we therefore reserve the right to make changes without notice.<br />

The information contained in our data sheets is believed to be accurate, however we do not assume any liability arising from the application or use of any product or<br />

circuit.<br />

Web Site: www.telecontrolli.com<br />

HEAD OFFICE & PLANT<br />

Via Nazionale delle Puglie, 177<br />

80026 CASORIA (NA), Italy<br />

Tel: +39 081 7599033<br />

Fax: +39 081 7596494<br />

SALES OFFICE<br />

sales @ telecontrolli.com

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!