PHONTECH - Jotron

Handbook page
4/128
Doc.No.: 98609-023-CO
COMMISSIONING TESTS:
The DICS 6101 is always configured according to the specified (customer) requirement. The maximum
capacity is 96 ports, but the modular design makes a configuration divided in 8 port expansion modules.
In addition the system has possibility of various facilities and alternative operation.
All available configuration details are listed in the Configuration specification sheets, (98609-023-CO
Attachment 1 (Configuration).xls). These sheets must be filled out according to every specific installation.
This DICS 6101 Commissioning Procedure is referring to the specific configuration sheet:
No. ACTION RESPONSE
(OK/FAILED)
COMMENTS
DATE DUE FOR
CORRECTION
1 Check if the handbook is delivered and
available for commissioning.
2 Check the installation according to installation
instructions.
Ref, doc. 99609-000-DE
The test below refers to the prepared and configured facilities and functionality programmed using the Configuration Software. The
Configuration specification sheets shall be filled in accordingly and used for commissioning purposes.
This “checked” column of the 98609-023-CO Attachment 1 (Configuration).xls must be used accordingly.
3 For each extension check:
4
a
b
c
d
Intercom / Telephone type
Unit Serial No.
Location / Extension ID
Extension Number
Auto Dial
e
(No entry or any ext No / Call group)
Service Class (membership)
f
(Always and only one)
Call Group (membership)
g
(None or any)
The following checkpoints applies to Digital
Intercom units (DICS 61xx) only:
PA Groups (membership)
h
(None or any)
i Auto Answer
Default volume setting;
j
PA / Speaker / Handset / Ring
k Default ring type
The following checkpoint applies to Trunk
Lines defined as PA out / PA in
Key line facility
l
NO / NC
5
Date:___________________
Customer / clients authorized representative signature:_______________________________
Phontechs representative signature:
_______________________________
Page 2 of 2