Broadband Power - KABELKON

LPE Enclosure
Indoor/Outdoor Enclosure
> Economical and lightweight enclosure solution
> Ideal for RFoG, MDU and N+0 applications
> More than 40% smaller than Alpha’s standard PWE-3 system
> Pole, wall or ground mount options
LPE Enclosure (For use with XM2-300HP)
Mechanical
LPE Enclosure
Dimensions
H x W x D (in/mm):
26 x 16.4 x 11.25 / 660 x 417 x 286
Weight (lb/kg): 25 / 11.3
Specifications
Material: Exterior powdercoated aluminum Battery: 220 GXL or two 70 HPL-FTs
Door and Lid Seal: Poron gasketing Tamper Switch: Optional
Color: Gray (custom colors available) Groundmount Pedastal: Optional
Lid: Removable Service Power Inserter: Optional SPI or SPI-RF
Door:
Hinged removable
28
NPS Enclosure
Indoor/Outdoor Enclosure
Enclosure Systems
> For low power applications including fiber deep up to N+6 applications
> More than 22% smaller than Alpha’s standard PWE-3 system
> Convenient pole, wall, ground and rack mount options
> Optional AlphaGuard battery balancer and SPI-RF service power inserter
NPS Enclosure
NPS Enclosure (For use with XM2-906HP and XM2-300HP)
Models: NPS-R NPS-W1 NPS-W2 NPS-F NPS-P
Configurations
Installation: Indoor Indoor Outdoor Indoor Outdoor
Description: 19" and 23" Rack mount Wall mount Wall mount Floor mount Pole mount
Mechanical
Dimensions
H x W x D (in/mm):
22.75 x 19 x 14.14 /
578 x 432 x 359
22.75 x 17 x 14.14 /
578 x 432 x 359
22.75 x 17 x 14.14 /
578 x 432 x 359
22.75 x 17 x 14.14 /
578 x 432 x 359
Weight (lb/kg): 39 / 17.7 39 / 17.7 39 / 17.7 39 / 17.7 39 / 17.7
22.75 x 17 x 14.14 /
578 x 432 x 359
Node Power
Supply Enclosure
Configurations:
With GXL Batteries
With 115 HPL Batteries
Specifications
Material: Exterior powdercoated aluminum Door: Hinged removable
Door and Lid Seal: Poron gasketing Tamper Switch: Optional
Color: Gray (custom colors available) Battery Side Tray: Optional
Lid:
Removable