19.03.2014 Views

FSR Fiberglass Stain Remover - Davis Instruments Corp.

FSR Fiberglass Stain Remover - Davis Instruments Corp.

FSR Fiberglass Stain Remover - Davis Instruments Corp.

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Material Safety Data Sheet<br />

<strong>FSR</strong> <strong>Fiberglass</strong> <strong>Stain</strong> <strong>Remover</strong><br />

<strong>Davis</strong> <strong>Instruments</strong> <strong>Corp</strong><br />

1.0 Manufacturer and Product ID<br />

Manufacturer:<br />

<strong>Davis</strong> <strong>Instruments</strong> <strong>Corp</strong>.<br />

3465 Diablo Avenue<br />

Hayward CA 94545<br />

510.732.9229<br />

Product Number and Description: #790 <strong>FSR</strong> <strong>Fiberglass</strong> <strong>Stain</strong> <strong>Remover</strong> (0.47 l)<br />

#792 <strong>FSR</strong> <strong>Fiberglass</strong> <strong>Stain</strong> <strong>Remover</strong> (2 l)<br />

Chemical Name and Synonyms:<br />

N/A<br />

Chemical Family:<br />

Water-based cleaner with viscosity booster<br />

Formula:<br />

Proprietary<br />

2.0 Hazardous Ingredients<br />

Description CAS # % TLV UNIT<br />

Isopropanol 67-63-0 4.5 400 PPM<br />

Oxalic Acid 144-32-7 4.5 N/A<br />

Non-toxic Ingredients 91.0<br />

3.0 Physical Data<br />

Parameter<br />

Value<br />

Boiling point: > 180 ºF<br />

Vapor Pressure: < 90 mm/Hg @ 100 ºF<br />

Vapor Density (Air at Sea Level = 1): N/A<br />

Solubility in water:<br />

Complete<br />

Appearance and odor:<br />

Light blue gel<br />

Specific Gravity (H2O = 1):<br />

1.10 g/cc<br />

Percent volatile by volume: 0<br />

Evaporation Rate (H2 = 1): < 1<br />

pH: 5<br />

4.0 Fire and Explosion Data<br />

Flash point:<br />

None to boiling<br />

Flammable limits: LEL: N/A UEL: None<br />

Extinguishing media:<br />

None needed<br />

Special fire fighting procedures:<br />

None<br />

Unusual fire and explosion hazards: None<br />

5.0 Health Hazard Data<br />

Threshold limit value:<br />

Effects of overexposure:<br />

Emergency first aid procedures:<br />

None established<br />

Skin and eye irritation<br />

Eyes: Flush immediately with cold water for 15 minutes. Contact a<br />

physician. Skin: Flush immediately with cold water for 15 minutes.<br />

Contact a physician. Ingestion: Drink large quantities of water,<br />

MS 790 L-01-0790 9/08/98 Page 1 of 2


Material Safety Data Sheet<br />

<strong>FSR</strong> <strong>Fiberglass</strong> <strong>Stain</strong> <strong>Remover</strong><br />

induce vomiting. Contact a physician. Inhalation: None. Move<br />

person to fresh air. Contact a physician.<br />

6.0 Reactivity Data<br />

Stability:<br />

Incompatibility<br />

Hazardous decomposition products:<br />

Hazardous polymerization<br />

Stable<br />

Oxidizing agents<br />

Intense heat may produce acidic fumes. Carbon monoxide and<br />

unidentified organic compounds may be formed during combustion.<br />

None<br />

7.0 Spill or Leak Procedure<br />

Steps to be taken in case material is released or spilled:<br />

Pick up excess with absorbent (saw dust). Flush balance with water. Do not allow run-off to enter lakes,<br />

streams, or sewage lines.<br />

Waste disposal method:<br />

Dispose of in accordance with local, state, and federal regulations.<br />

8.0 Special Protection<br />

Respiratory protection:<br />

None needed<br />

Ventilation:<br />

Local exhaust<br />

Protective gloves:<br />

Should be worn.<br />

Eye protection:<br />

Should be worn.<br />

Other protective equipment:<br />

rubber apron<br />

9.0 Special Precautions<br />

Precautions to be taken in handling and storage:<br />

Store away from sparks, flame, excessive heat, food, drink, and smoking materials.<br />

Other precautions:<br />

None.<br />

MS 790 L-01-0790 9/08/98 Page 2 of 2

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!