User's Manual - Kling & Freitag
User's Manual - Kling & Freitag
User's Manual - Kling & Freitag
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
User’s <strong>Manual</strong> CA 205<br />
The following signals may damage the speakers<br />
−<br />
−<br />
−<br />
permanent high-pitched signals with high frequency and continuous noise from<br />
feedback.<br />
permanently distorted signals with high power.<br />
noises, which occur when the amplifier is on while equipment is being connected,<br />
disconnected or switched on.<br />
Do not install speakers in any of the following places:<br />
− where the speakers are permanently exposed to direct sunlight<br />
−<br />
−<br />
where the speakers are exposed to high moisture or rain<br />
where the speakers are exposed to strong vibrations and dust.<br />
Damage caused by the speakers' magnetic fields<br />
Speakers are permanently surrounded by a magnetic field, even when they are not operating.<br />
Therefore, during transport and placement of the speakers, it is important to ensure<br />
that there is always approx. 1 m between the speakers and magnetic data media and<br />
computer/video monitors.<br />
Preventing hearing damage<br />
To prevent the risk of hearing damage, avoid being too close to operating speakers, even<br />
if the volume level seems to be low enough. In general, volume levels over 90 dB can<br />
cause hearing damage.<br />
Important<br />
Caution<br />
KLING & FREITAG GMBH ©1995-2005 Version 3.1, 08.11.2006 Page 6 of 22