Interaction tops - Knoll

C-leg tables, crank adjustable
Morrison tops
Interaction
description w d h pattern no. laminate L veneer V1 V2
Rectangular adjustable table 30 23 5 /8 23 1 /4 -35 IN S3024 D(R/L)( ) $2,080. $2,278. $2,473.
30 29 5 /8 23 1 /4 -35 IN S3030 D(R/L)( ) 2,143. 2,355. 2,568.
36 23 5 /8 23 1 /4 -35 IN S3624 D(R/L)( ) 2,112. 2,316. 2,518.
36 29 5 /8 23 1 /4 -35 IN S3630 D(R/L)( ) 2,173. 2,396. 2,613.
42 23 5 /8 23 1 /4 -35 IN S4224 D(R/L)( ) 2,143. 2,355. 2,568.
42 29 5 /8 23 1 /4 -35 IN S4230 D(R/L)( ) 2,205. 2,434. 2,660.
48 23 5 /8 23 1 /4 -35 IN S4824 D(R/L)( ) 2,173. 2,396. 2,613.
48 29 5 /8 23 1 /4 -35 IN S4830 D(R/L)( ) 2,239. 2,473. 2,707.
60 23 5 /8 23 1 /4 -35 IN S6024 D(R/L)( ) 2,239. 2,473. 2,707.
60 29 5 /8 23 1 /4 -35 IN S6030 D(R/L)( ) 2,299. 2,473. 2,707.
Curvilinear corner adjustable table 42 23 5 /8 23 1 /4 -35 IN C4224 D( ) 2,487. 2,643. 3,081.
48 23 5 /8 23 1 /4 -35 IN C4824 D( ) 2,577. 2,899. 3,217.
48 29 5 /8 23 1 /4 -35 IN C4830 D( ) 2,653. 2,992. 3,331.
Order Code
Specification Information
Application Notes
Example: IN S4830 DRV; V9, 117,
T4
I Interaction Table
N Morrison 1 1 /4 top
S Rectangular
48 Width
30 Depth
D Base type
R Right handle location
V Top type
V9 Top finish
117 Base finish
T4 Trim ring finish
Pattern number logic:
1. Interaction table
2. System top
3. Top shape
4-7. Top size
8. Base type
9. Handle location
10. Top type
Specify top type:
L Plastic laminate
V Veneer
Handle location (rectangular only):
R Right hand
L Left hand
Specify color fields:
Top finish
Base finish
Trim ring finish
Note: All veneer Morrison tops
come with matching veneer edge.
Crank adjustable tables provide
simple, quick height adjustment for
today’s heavy equipment loads, and
can be used in open plan
workstations or private offices.
Crank adjustable C-leg tables may
be used interactively in panel-based
or freestanding Morrison planning,
with tops to match 1 1 /4
worksurfaces.
The hand crank adjustment
mechanism easily lifts up to 300
lbs. of equipment. Five turns of the
low-profile folding crank handle
raise or lower the top one inch,
through a 23 1 /4 to 35 height range.
The handle grip is soft textured
rubber over steel. Handle may be
specified right or left on rectangular
tables.
Actual rectangular table widths are
1 less than nominal. Actual corner
table widths are 1 1 /2 less than
nominal. Glides permit 1 /2 leveling.
Locking casters may be ordered to
replace glides. Casters raise top
height range 1 1 /2 (see Accessories,
p. 68).
24