Interaction tops - Knoll

C-leg tables, Counterforce adjustable
Dividends Horizon tops
Interaction
description w d h pattern no.
laminate w/
PVC edge
laminate w/
woodgrain edge
laminate w/
metal edge
Straight counterforce table 29 13 /16 23 26 -41 ID S3024 C2 $3,015. $3,048. $3,081.
29 13 /16 29 26 -41 ID S3030 C2 3,078. 3,111. 3,144.
35 13 /16 23 26 -41 ID S3624 C2 3,046. 3,079. 3,112.
35 13 /16 29 26 -41 ID S3630 C2 3,110. 3,142. 3,175.
41 13 /16 23 26 -41 ID S4224 C2 3,078. 3,111. 3,144.
41 13 /16 29 26 -41 ID S4230 C2 3,139. 3,173. 3,206.
47 13 /16 23 26 -41 ID S4824 C2 3,110. 3,142. 3,175.
47 13 /16 29 26 -41 ID S4830 C2 3,172. 3,205. 3,238.
59 13 /16 23 26 -41 ID S6024 C2 3,172. 3,205. 3,238.
59 13 /16 29 26 -41 ID S6030 C2 3,233. 3,265. 3,299.
Order Code
Example: ID S4830 C2; 117, 117,
117, T4
I Interaction Table
D Dividends 1 1 /4 top
S Top shape
48 Width
30 Depth
C2 Base type, 2mm top edge
117 Top finish
117 Edge finish
117 Base finish
T4 Trim ring
Specification Information
Pattern number logic:
1. Interaction table
2. System top
3. Top shape
4-7. Top size
8. Base type
Specify color fields:
Top finish
Top edge finish
Base finish
Trim ring finish
53
Application Notes
Adjustable height Counterforce
C-leg tables may be used
interactively in panel-based
Dividends planning, with laminate
tops to match 1 1 /4 worksurfaces
with 2mm edge.
Fingertip control allows user to
adjust from seated to standing-work
height (26 -41) without tools or
effort. Counterforce tables may be
adjusted by the user to
counterbalance loads of 0-90 lbs.
Worksurfaces adjacent to
curvilinear corner tables must be
cantilevered not desk end
panel-supported.
Table base provides integral, lay-in
wire management in legs and
horizontal beam. Glides provide 1 /2
adjustment for leveling.
Note:
24D Counterforce tables provide
only 16 clear kneespace inside the
12 1 /4 cross-beam, 12 above the
floor. ANSI/BIFMA recommends
minimum 19D kneespace,
increasing to 23D at toe height.
For corner Counterforce
applications, see page 17.