lab-ospf

More documents

Recommendations

Info

Enter priviledge mode zebrad> enable Password: root [ Get command list: ] zebrad# list [ ... do the above if you really have to ... because we don’t need it here ? ]
View interfaces on R2 [if the IP addresses are not configured the listing can be like this: ] zebrad> show interface Interface eth0 index 1 metric 1 mtu 1500 input packets 0, bytes 0, dropped 0, multicast packets 0 input errors 0, length 0, overrun 0, CRC 0, frame 0, fifo 0, missed 0 output packets 0, bytes 0, dropped 0 output errors 0, aborted 0, carrier 0, fifo 0, heartbeat 0, window 0 collisions 0 Interface eth1 index 2 metric 1 mtu 1500 input packets 0, bytes 0, dropped 0, multicast packets 0 input errors 0, length 0, overrun 0, CRC 0, frame 0, fifo 0, missed 0 output packets 0, bytes 0, dropped 0 output errors 0, aborted 0, carrier 0, fifo 0, heartbeat 0, window 0 collisions 0
Page 1 and 2: lab-ospf Practical experiments with
Page 3 and 4: Start zebra and ospf daemons on all
Page 5: View information in Zebra zebrad> l
Page 9 and 10: Get a list of ospf commands ospfd>
Page 11 and 12: Check properties of interfaces on R
Page 13 and 14: Check neighbours of R21 r21 ospfd#
Page 15 and 16: check what we can configure ? ospfd
Page 17 and 18: You can also change link type ospfd
Page 19 and 20: View interface configuration after

lab-ospf

Create successful ePaper yourself

Delete template?

Save as template?