MICROPAK Permanent Economy Hood Brochure - Purolator Air ...
MICROPAK Permanent Economy Hood Brochure - Purolator Air ...
MICROPAK Permanent Economy Hood Brochure - Purolator Air ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>MICROPAK</strong>®<br />
<strong>Permanent</strong> <strong>Economy</strong> <strong>Hood</strong><br />
With room side replaceable PURO Gel seal filter<br />
Introduction<br />
The <strong>Purolator</strong> <strong>MICROPAK</strong> <strong>Permanent</strong> <strong>Economy</strong><br />
<strong>Hood</strong> (MPPE) is a supply hood designed for<br />
cleanrooms requiring clean air from ISO Class<br />
4 (Class 10) to ISO Class 8 (Class 100,000). A<br />
gel sealed <strong>MICROPAK</strong> filter can be installed or<br />
removed from the clean room side without removing<br />
or disturbing this innovative hood assembly.<br />
Applications<br />
The MPPE is used in cleanrooms where minimal<br />
downtime is critical–conditions common to the<br />
Pharmaceutical and Biotech industries. It is generally<br />
installed on 1.5" T-bar ceilings.<br />
<strong>MICROPAK</strong> Filters<br />
The MPPE utilizes our unique <strong>Purolator</strong> <strong>MICROPAK</strong><br />
Mini Pleat filter design, available in 2" depth. The<br />
<strong>MICROPAK</strong> specified for the MPPE shall have a gel<br />
seal channel on the upstream side which mates with the<br />
extruded knife edge on the MPPE. Two efficiencies are<br />
available: 99.99% on .3 micron scan and 99.9995% on<br />
.12 microns.<br />
Suggested Specifications<br />
1. The <strong>MICROPAK</strong> <strong>Permanent</strong> <strong>Economy</strong> <strong>Hood</strong><br />
(MPPE) shall be a permanent ducted supply hood as<br />
manufactured by <strong>Purolator</strong> <strong>Air</strong> Filtration.<br />
2. The MPPE shall be constructed of anodized, extruded<br />
aluminum with a bare mil finish aluminum plenum<br />
back.<br />
3. All seams shall be sealed with silastic caulking.<br />
4. An adjustable distribution plate shall be provided to<br />
disperse the supply of air.<br />
5. The HEPA filter shall have a white expanded grille on<br />
the downstream side.<br />
6. The hood shall have four hanging tabs.<br />
7. Static pressure port and distribution plate adjustment<br />
shall be made through the filter centerboard.<br />
8. The housing and filters shall be designed for a 1.5"<br />
T-bar grid.
<strong>MICROPAK</strong>®<br />
<strong>Permanent</strong> <strong>Economy</strong> <strong>Hood</strong><br />
With room side replaceable PURO Gel seal filter<br />
Product Dimensions<br />
10" or 12"<br />
8 29/32" 7"<br />
1/2"<br />
Detail A<br />
Housing<br />
Frame<br />
23 5/8" or 47 5/8"<br />
Gel Seal<br />
23 5/8"<br />
Filter<br />
Detail A<br />
Filter Retainer<br />
23 13/16"<br />
Ordering Information<br />
The design and construction<br />
of <strong>Purolator</strong> Filtration Systems<br />
modules are coded with an<br />
assembly part number. The part<br />
number is divided into sections<br />
consisting of the following<br />
information:<br />
M<br />
P<br />
P E 1 0 2 3 K 2 3 K 0<br />
1 2 3<br />
5<br />
Section 1: Product Type<br />
PE = <strong>Permanent</strong> <strong>Economy</strong> <strong>Hood</strong><br />
Section 2: Inlet Size<br />
10 = 10" Round<br />
12 = 12" Round<br />
Please note the following are the filters that<br />
should be ordered for our MPPEH if 99.99%<br />
efficiency filters are required on .3 micron:<br />
www.purolatorair.com<br />
Section 3: <strong>Hood</strong> Size<br />
23K23K = 23-5/8" x 23-5/8" (for a 1-1/2" T-bar grid)<br />
23K47K = 23-5/8" x 47-5/8" (for a 1-1/2" T-bar grid)<br />
Section 4: Options<br />
0 = None<br />
Exact Size<br />
22-1/4 x 22-1/4 x 4-3/4<br />
22-1/4 x 46-1/4 x 4-3/4<br />
PFS Filter Model Number<br />
MP2EX99-22D22D-05-U-FSU-ED-1-0<br />
MP2EX99-22D46D-05-U-FSU-ED-1-0<br />
Distributed by:<br />
P-<strong>MICROPAK</strong>HOOD-1009<br />
UL CERTIFICATE<br />
10001663 QM<br />
CLARCOR <strong>Air</strong> Filtration Products<br />
100 River Ridge Circle • Jeffersonville, IN 47130<br />
Customer Care Team: 1-866-925-2247 • Fax: 1-800-784-3458<br />
Email: info@purolatorair.com • www.purolatorair.com<br />
© 2009 CLARCOR <strong>Air</strong> Filtration Products.<br />
CLARCOR <strong>Air</strong> Filtration Products has a policy of continuous product research and<br />
development and reserves the right to change design and specifications without notice.<br />
Terms and Conditions of Sale can be accessed in the "LOGIN" section at www.purolatorair.com