10 Year Hardside Warranty - American National Manufacturing Inc.

Recommendations

Info

AMERICAN NATIONAL MANUFACTURING, INCORPORATED 10 Year Limited Warranty Congratulations!! You have purchased the highest quality water mattress on the market. Your American National Mfg., Inc. water mattress has been manufactured using a high quality, specially formulated vinyl. All mattresses have been electronically sealed, carefully inspected, and found to be free of any defects prior to leaving the factory. This water mattress is designed to provide maximum comfort and durability for years to come. In the event of product failure due to workmanship or materials, the cost to the consumer for a replacement mattress, exclusive of freight, will be: 0 – 36 MONTHS REPAIR OR REPLACE AT OUR OPTION 37 – 72 MONTHS REPLACE AT 50% OF PREVAILING RETAIL PRICE AT TIME OF RETURN 73 – 120 MONTHS REPLACE AT 75% OF PREVAILING RETAIL PRICE AT TIME OF RETURN If your American National Mfg., Inc. water mattress, should appear defective within the warranty period, locate the defect and attempt to repair the defect with a patch kit (not included). If you are unable to repair the defect, clearly mark the defective area with a felt tip marker, drain the mattress completely, fold it and return it to your dealer. If your dealer recommends factory service, Please call the Consumer Service Department of American National Mfg., Incorporated at (800) 854-6295. A representative will assist you in returning the mattress for warranty inspection. Under no circumstances will a refund of the purchase price be made. If the nature of the defect is determined to be a manufacturer’s defect, we will repair or replace the mattress at our option, subject to the provisions of this warranty. If American National Mfg., Inc. chooses to replace the mattress, the consumer will be responsible for any freight charges and the warranty will continue from the original purchase date, not the date of replacement. The warranty for commercial installations (such as motels, hotels, hospitals, etc…) is limited to six months. All Implied Warranties are Limited to the terms of this Warranty All Consequential and Incidental Damages are Hereby Excluded from this Warranty This warranty is additionally subject to the following conditions: 1. The American National Mfg., Inc. water mattress must be used indoors in strict compliance with the instructions 2. In case of any damage to the mattress resulting from improper installation, improper accessories, abuse, or improper maintenance the warranty shall be null and void. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Any and all disputes regarding any and all provisions of this warranty shall be brought before an informal dispute settlement board and unless, and until the provisions of these paragraphs are carried forth, no civil action may be instituted. The methods and procedures of this settlement board shall be subject to the rules and regulations set forth by the Federal Trade Commissions (FTC). 1. This water mattress must be used with a rigid perimeter or frame supporting the mattress on the bottom and all four (4) sides. 2. A properly installed vinyl safety liner that will reach the top of the frame and is capable of holding the entire contents of the mattress, must be used. 3. An approved water mattress conditioner must be used and repeated as recommended by its supplier. 4. A mattress pad must be used to protect the mattress from body oils. YOU MUST RETAIN THIS WARRANTY CARD AND YOUR ORIGINAL SALES RECEIPT FOR ALL WARRANTY CLAIMS This Warranty is valid for the following Water Mattresses: 1000 Deluxe Free Flow, Polyfloat 1500, Polyfloat 3000, Polyfloat 4500, Polyfloat 6000, Polyfloat 7500, Starlite, Starlite Supreme, Starlite Extra-Firm Supreme, and Starlite Duo-Cell Water Mattresses
Set-Up Heater Liner Mattress Filling Air Bubbles Bacteria Draining Maintenence Leaks W A R N I N G NEVER LEAVE AN INFANT ON THIS MATTRESS. INFANTS 12 MONTHS OF AGE OR YOUNGER CAN SUFFOCATE WHEN LYING ON THE MATTRESS OR WHEN TRAPPED BETWEEN THE MATTRESS AND THE FRAME. INFANTS CAN ALSO SUF- FOCATE WHEN ADULTS MISTAKENLY LAY OVER THEM IN BED. INSTALLATION INSTRUCTIONS (PLEASE FOLLOW CAREFULLY) Assemble frame and pedestal in accordance with manufacture’s instructions. Once filled, the bed cannot be moved unless drained. Follow the heater manufacturer’s instructions when using a heater. Failure to comply will void your warranty and may prove hazardous. After the frame and pedestal are assembled and heater is in place, carefully unfold the liner within the frame taking care to smooth out all wrinkles. Attach the liner to the frame according to the instructions. If self-supporting liner is used, position it snugly into all corners and carefully smooth out all wrinkles. Remember, if your mattress should leak, the liner will have to hold the entire contents of the water mattress. Failure to comply will void your warranty and may prove costly as well as hazardous. Carefully unfold the water mattress, place it within the safety liner, and position it so that all sides are straight and equal inside the frame. It is very important that you take time to smooth out all of the wrinkles in the water mattress. Using a waterbed adapter, insert water hose into the valve on the water mattress, and slowly turn on water (always flush hose thoroughly before attaching it to the bed). Use cold to warm water only, never use hot water. The highest point of the water mattress should not be more that nine (9) inches. Caution: Do not over fill water mattress. fill only to top of liner. When done filling, place the plug and cap on the valve and wipe up any water that may have spilled. Grasp the water mattress near the valve, and lift the valve above the water level while an assistant presses down with a pillow, on the water mattress. Gently move the air bubbles toward the valve. When the air is removed, close the valve by inserting the plug and screwing the cap on firmly. Repeat this process as often as needed. To prevent bacteria, use an approved waterbed conditioner every six (6) months or when ever the mattress is drained. Unplug the waterbed heater (This is critical)! A fill and drain kit containing a simple siphon that operates on house water pressure may be purchased at most waterbed stores. This will make draining easy. Carefully read instructions that come with the siphon. After the water mattress has been completely drained remove nozzle and replace plug and cap. Allow as little air to enter the mattress as possible. Use an ordinary mattress pad to protect the water mattress and retain the heat. If you should need to wash the surface, use a mild soap and water. Although your bed is made of the finest materials and is tough and durable, it is not indestructible. It is unwise to use sharp objects, such as scissors, sewing equipment, toys, etc... on your waterbed. If you are unable to locate the leak, dry your water mattress and place a light colored towel (one that will show moisture easily) around the perimeter of the bed. If this doesn’t work, drain the mattress and carefully place it on dry pavement. Fill the mattress with 2” to 3” of water and look for moisture on the pavement. This should enable you to locate the leak. Always circle the leak with a felt tip pen before folding the mattress. If further assistance is needed call the retail store where you purchased the mattress.
Page 1: 10 Year Hardside Warranty

10 Year Hardside Warranty - American National Manufacturing Inc.

Create successful ePaper yourself

Delete template?

Save as template?