MINING AUCTION

MINING AUCTION 

MINING MOBILE & FIXED EQUIPMENT 

WATER TREATMENT PLANT 

LIGHT VEHICLES 

THURSDAY 26 MAY 2011 – 11:00 AM 

KANGAROO FLAT MINE SITE 

66 HAM STREET 

KANGAROO FLAT (BENDIGO), VICTORIA 

(Reverse Osmosis Water Treatment Plant and Bulk Sample Crushing Plant 

are located at the New Moon site (Eaglehawk)and will be auctioned 'in situ' 

from the Kangaroo Flat site – prior inspection is essential.) 

INSPECTION: MONDAY 23 MAY TO WEDNESDAY 25 MAY (9 AM – 4 PM) 

CONTACT: David Hawkes 0427 505 871 (Unity Mining) 

TERMS: 10% deposit on fall of hammer, Cash/Cleared Funds on Day of Auction 

No buyer’s premium payable 

GST: Bidding conducted GST exclusive, 10% GST added to knock-down price 

AUCTIONEER CONTACT: Noel Dyett (Mobile 0418 532 145) 

www.curnowdyett.com.au 

Plant & Machinery Auctioneers 

1 st Floor, Killians Walk, Queen Street, Bendigo, VIC 3550 

Ph. (03) 5443 9255 Fax (03) 5441 5997

Unity Mining Auction CATALOGUE ~ 26 May 2011 Page 2/12 

CONDITIONS OF SALE 

1. That the highest bidder shall be declared the purchaser, the Vendor reserving the right to bid either by the Auctioneer or 

Vendor's agent, or to decline the offer for any of the lots, and if any dispute arises, the lot shall, at the option of the 

Auctioneer, be put up again and re-sold. 

2. That each bid shall be at least five percent in advance of the previous one, and no one will be allowed to retract his bid 

after once made. The Auctioneer reserves the right, at his absolute discretion to determine what constitutes a valid bid. 

3. The Auctioneer may refuse to accept any bid or withdraw any lot from the sale. 

4. That if requested by the Auctioneer the purchaser shall give the Auctioneers, as Agent for the Vendor, a deposit of at 

least 10 percent of the purchase price on the fall of the hammer, or the whole if demanded, and the remainder of the 

purchase money, in cash, certified bank cheque or telegraphic funds transfer immediately after the sale. 

5. All payments to be made by cash, certified bank cheque, telegraphic or electronic funds transfer to Unity Mining Limited 

for Lots sold. 

6. The whole of the lots having been on show for inspection, no allowance will be made, nor will any buyer be permitted to 

reject any lot on the pretence that it is not correctly described in the catalogue and the said lots are to be taken with all 

faults, at the buyer’s risk on the fall of the hammer. 

7. No lots are to be removed during the sale and the lots sold may only be collected after the buyer has obtained from the 

Auctioneers a completed Invoice detailing Lots purchased and paid in full for the lots in cash, bank cheque, telegraphic 

transfer or electronic funds transfer of cleared funds. All goods purchased must be removed by the purchaser no later 

than 4:00pm on Wednesday 1 June 2011. Access to the site must be arranged with Mr David Hawkes 0427 505 871. 

Unless alternative arrangements have been made with the vendor, any goods not removed by the due date will be 

deemed to have been abandoned. Unity Mining Limited reserves the right to limit and schedule access to the Mine site 

and items may only be moved and removed under the direction and authority of Mr Hawkes or his delegate. 

8. Upon any Purchaser failing to comply with any of the above conditions, any money deposited in part payment shall be 

absolutely forfeited to the Vendors, and all lots uncleared shall be sold by Public Auction or Private Contract and the 

deficiency (if any) on such sale, together with all costs and charges, shall be made good by the defaulter at this sale. 

9. Any monies outstanding at the termination of the sale, or payable as a result of any re-sale under Condition 8 herein, 

shall be payable to CURNOW DYETT, 1st Floor, Killians Walk, Queen Street, Bendigo, Vic. 3550. 

10. The Auctioneer will not hold himself responsible for any action that may arise in as much as he is acting solely as Agent 

for the Vendor. 

11. The Vendors or Agent shall not be held responsible for any accident to any person sustained prior to or during the period 

of the Sale or during the removal of any of the goods. Members of the public attend at their own risk. 

12. The items listed were available for sale at the date this catalogue was prepared. The Vendor and Agent accept no 

responsibility or liability for any loss incurred by any person if any item which has been advertised for sale is withdrawn 

from the auction prior to and including the day of sale. 

13. The Auction will be conducted on a GST exclusive basis. All auction knock-down prices are GST exclusive and 

10% GST will be added to the knock-down price when the sales invoice is issued. 

14. All motor vehicles are sold unregistered and without Roadworthy Certificates. Vehicles previously registered in Victoria 

will require a Roadworthy Certificate to be re-registered and the obligation will be on the purchaser to obtain such 

Roadworthy Certificate. Unity Mining Limited makes no representation as to the roadworthiness or condition of any 

vehicle sold. 

15. All available maintenance records and documentation for plant and vehicles sold will be made available for inspection on 

the Inspection Days but Unity Mining Limited makes no representation as to the condition or fitness for use of any item 

sold. Buyers must rely on their own investigations and assessments of all plant and vehicles for auction. 

16. INDUSTRIAL SAFETY WARNING 

The Occupational Health and Safety Act 2004 and Occupational Health and Safety Regulations 2007 impose 

obligations in respect of safety for workers. The Auctioneer warns buyers that it is the BUYER’S OR USER’S 

RESPONSIBILITY to ensure that any plant is brought to a standard necessary to comply with the Occupational Health 

and Safety Act 2004 and Regulations, and is safe and fit for use in a workplace. The Vendor provides no warranty to the 

Buyer that the plant complies with any Commonwealth, State of Territory Act or Regulations. 

17. The Vendor and Agent reserve the right to make any changes to the Conditions of Sale, which they deem necessary, up 

to and including the day of sale.


LOT NO. 

DESCRIPTION 

1 CATERPILLAR LOADER R2900 LOAD (UL03) 

Serial No. JLK00765, Frame 15480hrs Engine 15480hrs 

2 ATLAS COPCO JUMBO M2D (UJ03) 

Serial No. AVO 05A280, Frame 3025hrs Engine 695hrs 

Percussion LH - 6180hrs Power Pack LH - 5697hrs Percussion RH - 3988hrs Power Pack RH - 5740hrs 

3 ATLAS COPCO TRUCK MT5010 (UT01) 

Serial No. AVO 05X129/8997041200 (284) Frame 16665hrs Engine 7133hrs 


Serial No. AVO 05X145/8997042200 (285) Frame 16515hrs Engine 16515hrs 


Serial No. AVO 06X018/8997052800 (291) Frame 15286hrs Engine 8883hrs


LOT NO. 

DESCRIPTION 

6 CATERPILLAR IT LOADER 930G (SV01) 

Serial No. OTFW00185 Frame 8763hrs Engine 8763hrs 

7 REVERSE OSMOSIS WATER TREATMENT PLANT 

(Located at New Moon - Eaglehawk) 

Designed treated water capacity 7 ML/day; permeate generation 5 ML/day 

Veolia plant - RO train x 2 and Actiflow pre-treatment 

Occtech plant - RO train


LOT NO. 

DESCRIPTION 

8 BULK SAMPLE PLANT - CRUSHING CIRCUIT AND BATCH SAMPLING PLANT 

(Located at New Moon - Eaglehawk) 

30-50 tph Crushing circuit including Ruwolt 30x18 jaw crusher, 4' Symons cone crusher and stacking 

conveyor 

Batch sample plant includes feed splitter, conveyors, storage bins, hammer mill, spinners x2 and tails 

module 

9 TRANSTANK 67,000 LITRE FUEL TANK 

Serial No. 200417 

Fitted with 40 L/min standard & high flow quick fill pumps 

10 90 TONNE ENERPAC PRESS Model IPE10010A104 

Serial No. 407 with guarding and 240V 30A Electric hydraulic pump 

11 ATLAS COPCO MT5010 Truck Tray 

ATLAS COPCO MT5010 Truck Spare Parts 

ATLAS COPCO MT5010 Truck Tyres - runouts (x9) with 30% tread remaining 

ATLAS COPCO MT5010 Truck Engine Test Kit 

ATLAS COPCO MT5010 Truck Transmission Test kit 

12 CATERPILLAR LOADER R2900 Bucket 

CATERPILLAR LOADER R2900 Cab - damaged (needs repair and recertification) 

CATERPILLAR LOADER R2900 Tyres - runouts (x7) with 30% tread remaining 

CATERPILLAR LOADER R2900 Spare parts


LOT NO. 

DESCRIPTION 

13 CATERPILLAR LOADER IT Loader 930G Bucket (2 off) 

14 CATERPILLAR LOADER R1300 Loader Hydraulic cylinders - steering, tilt and lift 

15 2007 FIRE TRUCK ISUZU 4X4 - MODEL NO. F3 FTS Reg. No. UXR577 

VIN: JALFTS34H47000358 507hrs 6939km 

15A 

2001 NISSAN PATROL WAGON (White) (Y61), Reg. No. FR9398 

VIN: JN1TESY61A0305524, 3.0Ltr Turbo 

16 TOYOTA LANDCRUISER 100 SERIES WAGON (LV010), UNREGISTERED 

VIN: JTECB01J301024880, HZ105 

17 LANDCRUISER 79 SERIES TRAYBACK (LV003), UNREGISTERED 

VIN: JTELB71J707054597, HZJ79 













24 HYSTER H225H FORKLIFT 

Serial No. C75-1549A Engine 10340hrs


LOT NO. 

DESCRIPTION 

25 MITSUBISHI FG25 FORKLIFT 

Serial No. F17B02666 Engine 8534hrs 

26 TCM FORKLIFT 

Serial No. 38901 

27 ATLAS COPCO XAS97DD PF MOBILE COMPRESSOR (DIESEL) (CP01) 

7 bar 2750rpm 36kW 190cfm Engine 665hrs 

28 ATLAS COPCO XAS97DD FB AC MOBILE COMPRESSOR (DIESEL) (CP02) 

7 bar 2750rpm 36kW 190cfm Engine 754hrs 

29 ATLAS COPCO GA22FF COMPRESSOR 

1000V 133cfm 

30 INGERSOLL RAND 7100-HD15 COMPRESSOR & AIR RECEIVER 

Serial No. 1001 1000V 11kW 1465rpm 

31 PEERLESS COMPRESSOR & AIR RECEIVER 

Serial No. 5640-7 1000V 7.5 kW 2900rpm 

32 PEERLESS COMPRESSOR & AIR RECEIVER, 415V 

33 CATERPILLAR IT LOADER 930G HIGH LIFT WORK PLATFORM (WP02) 

34 CATERPILLAR IT LOADER 930G CHARGE BASKET & ANFO KETTLE 500LTR 

35 CATERPILLAR LOADER R1300 CHARGE BASKET & ANFO KETTLE 45KG 

36 SATSTAT FUEL STATION 

SDS Ausminco Model No. SAT25H2-10F, 2 x 1000Ltr fuel pods & AFFF fire suppression 

37 ALLRIGHT DIESEL GENERATOR 

Model No. P77E – 77kVA, 415/240V 107A 125CB 

38 LINCOLN RANGER 405D ELECTRIC WELDER 

39 RAISE BORE STABILISERS (8 off) new & used, 1.5m x 15” diameter, used bits 

40 PROTAN VENT BAG 1400MM DIAMETER 

400metres New, 600metres repaired, plus rings, clamps and bends 

41 TWIN STAGE 90KW HOWDEN FAN (FA004) HF1454 Serial No. FR539 

DUAL 90KW FAN STARTER (FS10) 1000 PLC 

42 TWIN STAGE 90 KW AUSMINCO FAN (FA005) Gal 14 900/900, Serial No. 725 

DUAL 90KW FAN STARTER 

(FS03)


LOT NO. 

DESCRIPTION 

43 TWIN STAGE 90 KW AUSMINCO FAN (FA007) AL 14900, Serial No. 930 

44 TWIN STAGE 55 KW CLEMCORP FAN (FA008) CC1254, Serial No. C1888 

45 TWIN STAGE 55 KW AUSMINCO FAN (FA010) 

46 SINGLE STAGE 22 KW CLEMCORP FAN (FA022) CC760 Serial No. C2326 

SINGLE 110KW FAN STARTER – 1100PLC (FS17) 


SINGLE 110KW FAN STARTER – 1100PLC (FS01) 


SINGLE 18KW FAN STARTER 

(FS02) 

49 SINGLE STAGE 22 KW FAN (FA025) 


(FS13) 

50 SINGLE STAGE 22 KW CLEMCORP FAN (FA026) CC760 

SINGLE 55KW FAN STARTER - 1100PLC (FS22) 

51 SINGLE STAGE 22 KW CLEMCORP FAN (FA027) CC760, Serial No. C2071 


52 SINGLE 110KW FAN STARTER (FS26) 


(FS29) 

53 SINGLE 110KW FAN STARTER - 1100PLC (FS28) 


54 ROVATTI MULTI STAGE CLEAR WATER PUMP NO 1 Serial No. 006763 

ROVATTI MULTI STAGE CLEAR WATER PUMP NO 2 Serial No. 006761 


Each pump is 3 stage centrifugal, 1000V, 200kW, 2980 rpm - Manufactured 2006 

CWPS MCC - 3 x 210A 1000V soft starters, 800A Main switch, Compact Logix L32E PLC, Panelview 

Plus 600 

55 ROVATTI MULTI STAGE CLEAR WATER PUMP NO 1 Serial No. 006759 



Each pump is 5 stage centrifugal, 1000V, 200kW, 2980 rpm - Manufactured 2006 

CWPS MCC - 3 x 210A 1000V soft starters, 800A Main switch, Compact Logix L32E PLC, Panelview 

Plus 600 

56 MONO EO82 PUMP NO 3 & PUMP HOPPER 1000V 

MONO EO82 PUMP NO 5 & PUMP HOPPER 1000V 



MONO EO82 PUMP NO 4 & PUMP HOPPER 1000V 


60 DUAL WARMAN 4/3 PUMP Serial No. G067N 

DUAL WARMAN 4/3 PUMP Serial No. G071N 

Each with Dual 55kW motor 1000V, Integrated starter, pump hopper & Tektaylor valve fitted 



Each with Dual 55kW motor 1000V, Integrated starter, pump hopper & Tektaylor valve fitted


LOT NO. 

DESCRIPTION 



Each with Dual 55kW motor 1000V, Integrated starter, pump hopper & Tektaylor valve fitted 

63 8KW FLYGT PUMP (P02) 1000V 

8KW FLYGT PUMP (P61) 1000V 


8KW FLYGT PUMP (P50) 1000V, 500kPA, single impeller 

64 8KW FLYGT PUMP (P53) 1000V, 450kPA, single impeller 

8KW FLYGT PUMP (P21) 1000V, 450kPA 




65 8KW FLYGT PUMP (P25) 1000V 





8KW FLYGT PUMP (P56) 1000V, 300kPA 


66 JUMBO/FLYGT PUMP STARTER (JB02) 1000V 

JUMBO/FLYGT PUMP STARTER (JB23) 1000V 





68 JUMBO/FLYGT PUMP STARTER (JB20) Positron, 1000V 


JUMBO/FLYGT PUMP STARTER (JB14) Positron, 1000V 




70 JUMBO/FLYGT PUMP STARTER (JB01) Positron, 1000V 

JUMBO STARTER 

(JB29) Positron, 1000V 

5-37KW FLYGT PUMP STARTER (PS29) Sistec controller, 1000V 

5-37KW FLYGT PUMP STARTER (PS01) 1000V 

71 5-37KW FLYGT PUMP STARTER (PS02) 1000V 

5-37KW FLYGT PUMP STARTER (PS34) PCM controller, 1000V 


72 5-37KW FLYGT PUMP STARTER (PS14) 1000V 


5-37KW FLYGT PUMP STARTER (PS07) 1000V 

73 40KW DECANT PUMP STARTER (PS33) No Macey outlet, 1000V 

40KW DECANT PUMP STARTER (PS54) No Macey outlet, 1000V 

40KW DECANT PUMP STARTER (PS72) No Macey outlet, 1000V 

74 55KW MONO/ 37KW FLYGT PUMP STARTER (PS19) 1000V 

55KW MONO PUMP STARTER 

(PS10) 1000V 

75 55KW MONO PUMP STARTER (PS12) 1000VA 1000V/240V TX 

DUAL 55KW MONO PUMP STARTER (PS17) 1000V


LOT NO. 

DESCRIPTION 

76 2 WAY DISTRIBUTION BOARD (DB020) 250A isolator 1x 160A, 1x 250A CB 

2 WAY DISTRIBUTION BOARD (DB014) 250A isolator 2x 125A, CB 

2 WAY DISTRIBUTION BOARD (DB041) 250A isolator 2x 160A, CB 

2 WAY DISTRIBUTION BOARD (DB015) 250A isolator 1x 100A, 1x 125A, CB, 24V lighting 

77 2 WAY DISTRIBUTION BOARD (DB024) 250A isolator 2x 160A, CB, 24V lighting 

2 WAY DISTRIBUTION BOARD (DB037) 250A isolator 2x 160A, CB, 24V lighting 



78 2 WAY DISTRIBUTION BOARD (DB026) 250A isolator 2x 160A, CB, 24V lighting 

6WAY DISTRIBUTION BOARD (DB030) 400A isolator 2x 160A, 2x 250A, 2x 100A CB, 

32V lighting, 1500 x 1800 box 

79 SUBSTATION RAISE BORE 750kVA 11kV/415V - Long & Crawford HV switch, 1250A 415V CB 

80 SUBSTATION 4 1000kVA 11kV/1000V - 6 outlets, Lucy HV switch 



83 REFUGE BAY AMEU - 12 man (No. 6) 

Australian Mining Evacuation Unit, 12 person, Scrubber type – CO2. 

Dimensions are 3.6m long x 2.0m wide x 1.8m high. 

84 REFUGE BAY AMEU - 12 man (No. 3) 

Australian Mining Evacuation Unit, 12 person, Scrubber type – CO2. 

Dimensions are 4.4m long x 2.4m wide x 2.2m high. 

85 BREATHING APPARATUS AND EQUIPMENT – Draeger BG4 x6, Draeger PA90 BA sets x 6 

86 OXYGEN BOOSTER COMPRESSOR – Master Line Model 7000 A - Z MDM - 4


BIDDER REGISTRATION 

(IMPORTANT – PLEASE COMPLETE FORM AND REGISTER AT THE 

AUCTIONEER’S OFFICE PRIOR TO COMMENCEMENT OF AUCTION) 

UNITY MINING LIMITED 

66 HAM STREET, KANGAROO FLAT 

AUCTION ~ THURSDAY 26 MAY 2011 at 11:00 AM 

FIRST NAME: 

LAST NAME: 

COMPANY NAME: 

BUSINESS ABN NO.: 

NO./STREET: 

SUBURB/CITY: 

STATE: 

POST CODE: 

EMAIL: 

PHONE: ( ) FAX: ( ) 

DRIVERS LICENCE NO.: 

EXPIRY DATE: 

LMCT NO.: 

CONDITIONS OF SALE: 

I hereby acknowledge that I have read the conditions of sale printed on the reverse hereof 

and confirm that I understand and agree to the terms and conditions contained therein. 

SIGNATURE: 

DATE: 

PRIVACY: 

The personal information collected herein is for the primary purpose of registering you to enable you to bid at this 

auction. This information will be provided to Unity Mining Limited for whom we act as Agent and may be passed on 

to third parties acting for you collecting goods that you have purchased. We will not disclose your personal 

information to any other person or organization without your consent other than as required by law. 

www.curnowdyett.com.au 

Plant & Machinery Auctioneers 

1 st Floor, Killians Walk, Queen Street, Bendigo, VIC 3550 

Ph. (03) 5443 9255 Fax (03) 5441 5997


CONDITIONS OF SALE 

1. That the highest bidder shall be declared the purchaser, the Vendor reserving the right to bid either by the Auctioneer or 

Vendor's agent, or to decline the offer for any of the lots, and if any dispute arises, the lot shall, at the option of the 

Auctioneer, be put up again and re-sold. 

2. That each bid shall be at least five percent in advance of the previous one, and no one will be allowed to retract his bid 

after once made. The Auctioneer reserves the right, at his absolute discretion to determine what constitutes a valid bid. 

3. The Auctioneer may refuse to accept any bid or withdraw any lot from the sale. 

4. That if requested by the Auctioneer the purchaser shall give the Auctioneers, as Agent for the Vendor, a deposit of at 

least 10 percent of the purchase price on the fall of the hammer, or the whole if demanded, and the remainder of the 

purchase money, in cash, certified bank cheque or telegraphic funds transfer immediately after the sale. 

5. All payments to be made by cash, certified bank cheque, telegraphic or electronic funds transfer to Unity Mining Limited 

for Lots sold. 

6. The whole of the lots having been on show for inspection, no allowance will be made, nor will any buyer be permitted to 

reject any lot on the pretence that it is not correctly described in the catalogue and the said lots are to be taken with all 

faults, at the buyer’s risk on the fall of the hammer. 

7. No lots are to be removed during the sale and the lots sold may only be collected after the buyer has obtained from the 

Auctioneers a completed Invoice detailing Lots purchased and paid in full for the lots in cash, bank cheque, telegraphic 

transfer or electronic funds transfer of cleared funds. All goods purchased must be removed by the purchaser no later 

than 4:00pm on Wednesday 1 June 2011. Access to the site must be arranged with Mr David Hawkes 0427 505 871. 

Unless alternative arrangements have been made with the vendor, any goods not removed by the due date will be 

deemed to have been abandoned. Unity Mining Limited reserves the right to limit and schedule access to the Mine site 

and items may only be moved and removed under the direction and authority of Mr Hawkes or his delegate. 

8. Upon any Purchaser failing to comply with any of the above conditions, any money deposited in part payment shall be 

absolutely forfeited to the Vendors, and all lots uncleared shall be sold by Public Auction or Private Contract and the 

deficiency (if any) on such sale, together with all costs and charges, shall be made good by the defaulter at this sale. 

9. Any monies outstanding at the termination of the sale, or payable as a result of any re-sale under Condition 8 herein, 

shall be payable to CURNOW DYETT, 1st Floor, Killians Walk, Queen Street, Bendigo, Vic. 3550. 

10. The Auctioneer will not hold himself responsible for any action that may arise in as much as he is acting solely as Agent 

for the Vendor. 

11. The Vendors or Agent shall not be held responsible for any accident to any person sustained prior to or during the period 

of the Sale or during the removal of any of the goods. Members of the public attend at their own risk. 

12. The items listed were available for sale at the date this catalogue was prepared. The Vendor and Agent accept no 

responsibility or liability for any loss incurred by any person if any item which has been advertised for sale is withdrawn 

from the auction prior to and including the day of sale. 

13. The Auction will be conducted on a GST exclusive basis. All auction knock-down prices are GST exclusive and 

10% GST will be added to the knock-down price when the sales invoice is issued. 

14. All motor vehicles are sold unregistered and without Roadworthy Certificates. Vehicles previously registered in Victoria 

will require a Roadworthy Certificate to be re-registered and the obligation will be on the purchaser to obtain such 

Roadworthy Certificate. Unity Mining Limited makes no representation as to the roadworthiness or condition of any 

vehicle sold. 

15. All available maintenance records and documentation for plant and vehicles sold will be made available for inspection on 

the Inspection Days but Unity Mining Limited makes no representation as to the condition or fitness for use of any item 

sold. Buyers must rely on their own investigations and assessments of all plant and vehicles for auction. 

16. INDUSTRIAL SAFETY WARNING 

The Occupational Health and Safety Act 2004 and Occupational Health and Safety Regulations 2007 impose 

obligations in respect of safety for workers. The Auctioneer warns buyers that it is the BUYER’S OR USER’S 

RESPONSIBILITY to ensure that any plant is brought to a standard necessary to comply with the Occupational Health 

and Safety Act 2004 and Regulations, and is safe and fit for use in a workplace. The Vendor provides no warranty to the 

Buyer that the plant complies with any Commonwealth, State of Territory Act or Regulations. 

17. The Vendor and Agent reserve the right to make any changes to the Conditions of Sale, which they deem necessary, up 

to and including the day of sale.

MINING AUCTION

Create successful ePaper yourself

Delete template?

Save as template?