ARINC 404 (scans) - Amphenol Canada

Amphenol ® ARINC 404 

Rack and Panel Connectors 

SL-378-3 

Amphenol ® Canada Corporation

Amphenol Corporation 

Amphenol Canada 

20 Melford Drive 

Scarborough, ON M1B 2X6 

Canada 

Phone: 416-291-4401 

Fax: 416-292-0647 

Amphenol Aerospace 

40-60 Delaware Avenue 

Sidney, NY 13838-1395 

Phone: 607-563-5453 

Fax: 607-563-5351 

SALES OFFICES 


22952 Alcade Drive 

Suite 110 

Laguna Hills, CA 92653 

Phone: 949-855-4454 

Fax: 949-855-9115 


57 E. Hattendorf Ave. 

Suite 150 

Roselle, IL 60172 

Phone: 630-893-1713 

Fax: 630-893-3958 


7506 East Independence Blvd. 

Charlotte, NC 28227 

Phone: 704-531-9053 

Fax: 704-531-9054 

DISTRIBUTORS 

Aeroflite Enterprises Inc. 

265 Gemini Avenue 

Brea, CA 92821 

Phone: 714-773-4251 

Fax: 714-773-1148 

Powell Electronics 

4848 South Island Avenue 

Philadelphia, PA 19153 

Phone: 215-937-7014 

800-347-0900 

Fax: 215-937-4622 

MEXICO 

Amphenol Sales Office 

Presidente Mazaryk No. 61-2 

C.P. 11570 Mexico D.F. 

Mexico 

Phone: (52-5) 254-7283 

Fax: (52-5) 531-9659 

Europe 

AUSTRIA 

Amphenol Ges mbH 

Tautenhayngasse 22 

A-1150 Wien (Vienna) 

Austria 

Phone: (43-1) 985-15-11 

Fax: (43-1) 982-61-01 

Telex: (847) 132661 AMPHW A 

ENGLAND 

Amphenol Limited 

Thanet Way, Whitstable 

Kent CT5 3JF 

England 

Phone: (44-227) 773200 

Fax: (44-227) 276571 

Telex: (851) 96157 AMPHNL G 


Spectra Strip LImited 

Romsey Industrial Estate 

Greatbridge Road 

Romsey, Hampshire S05 OHR 

England 

Phone: (44-794) 517575 

Fax: (44-794) 516246 

Telex: (851) 47467 

GERMANY 

Amphenol-Tuchel Electronics 

GmbH 

August-Haeusser Strasse 10 

Postfach 3469 

74001 Heilbronn 

Germany 

Phone: (49-7131) 929 0 

Fax: (49-7131) 929 323 

Telex: (841) 728 816 ATEHN D 

ITALY 

Amphenol Italia S.P.A. 

Galleria Gandhi, 2-27 

20017 Mazzo di Rho 

Milano 

Italy 

Phone: (390-2) 935-03190 

Fax: (390-2) 935-03206 

Telex: 334623 AMPHIT I 

NETHERLANDS 

Amphenol Benetux B.V. 

P.O. Box 63 

3990 DB Houten 

The NetherIands 

Phone: (31-3403) 78754 

Fax: (31-3403) 77899 

Telex: (844) 40794 AMPHNL NL 

SWEDEN 

Amphenol Scandinavia 

Johannelundsvagen 2 

194 02 Upplands Vaesby 

P.O. Box 2047 

Sweden 

Phone: (46-8) 590-77100 

Fax: (46-8) 590-33800 

Near East 

ISREAL 

Bar-Tec Ltd. 

P.O. Box 279 

KFAR-SAVA 

44102 

Phone: (972-9) 764 4100 

Fax: (972-9) 767 4324 

Far East 

HONG KONG 

Amphenol East Asia Ltd. 

Unit Nos. 705-6, 7Fl. Block B 

Hung Hom Commercial Center 

37-39 Ma Tau Wai Road 

Hung Hom Kowloon 

Hong Kong 

Phone: (852) 362-0787 

Fax: (852) 764-7910 

TAIWAN 

Amphenol East Asia, Ltd. 

12 Hsin-Pei-Yuan Road 

Chugnli Industrial Zone 

Taoyuan Hsien, Taiwan, R.O.C. 

Phone: (886-3) 462-9445 

Fax: (886-3) 451-4062 

SINGAPORE 


80 Genting Lane 

09-04 Genting Block 

Ruby Industrial Complex 

Singapore 1334. 

Phone: (65) 7433022 

Fax: (65) 7432466 

Telex: RS 23499 AMPHNL 

INDIA 

Amphetronix Lld. 

105 Bhosari Industrial Area 

PosI Box No. 1 

Poona, 411 026 

India 

Phone: (91-212) 790363 

Fax: (91-212) 790581 

Telex: (953) 146237 

JAPAN 

Nippon Interconnect 

Company 

689-1, Aza Nogami, Iseochi 

Ritto-Cho, Shiga 520-30 

Japan 

Phone: (81-3) 3263-5611 

Fax: (81-3) 5276-7059 

Africa 

SOUTH AFRICA 

Pace Electronic Components 

(PTY) Ltd. 

Cnr. Vanacht & Gewel Streets 

P.O. Box 701, Isando 1600 

South Africa 

Phone: 27-11-974-1211 

Fax: 27-11-974-1271 

AustraIia 

Australia & New Zealand 


55 Saint Vincent St. 

Port Adelaidea 

South Australia 6016 

Phone: (61-8) 341-0665 

Fax: (61-8) 341-1588 

Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are 

believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind expressed or implied. Statements or suggestions concerning possible use of our products 

are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are 

indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors. 

© 2002 Amphenol Corp. Printed in Canada 02/02

Amphenol ® ARINC 600 

Rack and Panel Connectors 

SL-379-3 

Amphenol ® Canada Corporation


rack and panel connectors 

Introduction 

ARINC 600 Connectors are a recognized standard rack and panel connector for 

aircraft applications. The ARINC 600 is the successor to the ARINC 404 for many of 

the new avionic designs. Compared to the ARINC 404, the ARINC 600 features lower 

mating force contacts, increased contact count and a front release, floating keying 

system. 

Amphenol's extensive product offering will meet the most demanding needs of our 

customers. At the design-in stage, Amphenol's sales engineers will work with you to 

select a connector from our standard product line or coordinate the design of an 

application specific connector. Amphenol's ARINC 600 rack and panel connectors 

are designed to meet all relevant ARINC 600 connector specifications. 

Amphenol ARINC 600 Connectors offer: 

• Low insertion force contacts 

• Both environmental and non-environmental versions 

• Front removable keying posts 

• Field replaceable inserts for size 22 and power contacts 

• Up to 800 size 22 contact positions in one connector 

• Crimp, coaxial, power, printed circuit, and wire wrap contacts 

• Waveguide connections 

1


rack and panel connectors 

Performance Specifications 

Amphenol “A” Series Connectors are designed per ARINC 

600 specifications and utilize pin and socket contacts 

manufactured in conformance with MIL-C-39029B. 

Dielectric withstanding 

voltage (DWV): 

1500Vrms 

500 Vrms @ 50,000 ft. (15,240m) 

Contact continuous Size 22 - 5.0A: Size 20 - 7.5A 

current ratings: Size 16 - 13.0A; Size 12 - 23.0A 

Contact resistance: 

Size 22: 

Size 20: 

Size 16: 

Size 12: 

Insulation resistance: 

8.0 milliohms, initial (max.) 

11.0 milliohms, conditioned (max.) 


8.5 milliohms,conditioned (max.) 





5.0 gigaohms min. at 500 VDC 

Material Specifications 

Shells: Aluminum alloy per QQ-A 225/8, 

cadmium plate per QQ-P-416, Class 2, 

Type II, yellow Iridite 

or Die cast per QQ-A-591, with CHEM film 

per MIL-C-5541 

Retaining plates: 

Polarizing keys: 

Insulator material: 

Inserts, grounded: 

Screws, lockwashers, 

washers: 

Contact bodies: 

Aluminum alloy per QQ-A-225/8, 

electroless nickel plated per MIL-C-26074 



Glass filled epoxy (Commercial) 

Glass filled diallyl phthalate per MIL-M-14, 

Type SDG-F (Military) 

Aluminum alloy per QQ-A-225/8 


Stainless steel - passivated 

Copper alloy gold plated per 

MIL-G-45204, Type II, Grade C, Class 1 

Engagement/separation 

force: 

Durability: 

Shell size 1 - 27 Ibs. (120N) max. 



500 cycles min. - mating & unmating 

Contact retention clips: 

Seals & grommets: 

Copper, gold plated per 

MIL-G-45204, Type II, Grade C, Class 1 

Silicone/fluorosilicone elastomer blend 

per MIL-R-25988 

Temperature range: -65°C (-86° F) to +125°C (+275° F) 

O-Rings: 

Silicone/fluorosilicone rubber, colored blue 

Fluid immersion (Class 

A only) resistance: 

(1) Hydraulic fluid per MIL-H-5606 

(2) Lubricating oil (synthetic) per 

MIL-L-23699 

(3) 1:3 mix of isopropyl alcohol 

& mineral spirits per FED. SPECS. 

TT-I-735 &TT-T-291 respectively. 

Waveguides: 

EMI springs: 


yellow Iridite finish 

Beryllium copper per QQ-C-533, 


Vibration: MIL-STD-1344, Method 2005.1, 

condition value E: random - 16.4G 

minimum severity: 8 hours in each of 3 

mutually perpendicular planes 

with 100mA electrical load. 

No visible damage, breakage, cracking 

or loosening of parts and no 

discontinuities exceeding 1 

microsecond. 

Shock: 

MIL-STD-1344, Method 2004.1, test 

condition A: Three shocks in each 

direction along each of 3 axes, mutually 

perpendicular to each other. No visible 

damage,breakage, cracking or 

loosening of parts and no 

discontinuities exceeding 1 

microsecond. 

2

ARINC 600 

insert availability and identification 

F 

F 

F 

F 

F 

F 

F 

F 

F 

F 

For availability of other arrangements, consult Amphenol Canada Corporation. 

* E designates Environmental 

D designates Non-Environmental 

3


keying and polarizing positions 

Keying 

RECEPTACLE 

PLUG 

Part Number 

Key post Kit 3 posts, plate, screws (for Plug) AC-060020-P01 

Keyway Kit 3 keyways, plate, screws (for Receptacle) AC-060020-K01 

The following chart lists the polarizing positions of available keying positions. 

See how to order procedure on page 15 for incorporating these polarizing positions into part numbers. 

4 

(Continues to next page)


polarizing positions 

The following chart continues (from page 4) listing the polarizing positions of available keying positions. 

See how to order procedure on page 15 for incorporating these polarizing codes into part numbers. 

5

ARINC 600 Shell Size 1 

Shell Size 1 Contact Layout Arrangements 

Inserts for Cavities A & B, 

Shell Size 1 

For availability of other arrangements, consult Amphenol Canada Corporation. 

See pages 13-15 for how to order. 

6

Shell Size 1 Contact Layout Arrangements 

PLUG 

PANEL CUTOUT 

RECEPTACLE 

PANEL CUTOUT 

* Indicates area where "AMPHENOL", catalog number and date code will be ink stamped per 9-5788-3. 

Dimensions are shown in inches, (mm). 

All dimensions for reference only. 

7

ARINC 600 Shell Size 2 & 3 

Shell Size 2 & 3 Contact Layout Arrangements 

Inserts for Cavities A & B - Shell Size 2 

Inserts for Cavities A, B, D & E - Shell Size 3 

Inserts for Cavities C - Shell Size 2 

Inserts for Cavities C & F - Shell Size 3 

For availability of other arrangements, consult factory. 

See pages 13-15 for how to order. 

8


Shell Size 2 Dimensional Drawings 

PLUG 

PANEL CUTOUT 

RECEPTACLE 

PANEL CUTOUT 




9


Shell Size 3 Dimensional Drawings 

PLUG 

PANEL CUTOUT 

RECEPTACLE 

PANEL CUTOUT 




10


contact data 

Contacts for Amphenol ® ARINC 600 Rack and Panel Connectors can be ordered separately. 

Use part numbers shown in the charts below for ordering contacts and applicable tools. 

For further information consult Amphenol Canada Corporation. 

ARINC 600 Power/Signal Contacts, Rear Release 

M39029/93-537 

M39029/93-538 

Amphenol part numbers meet MIL specifications, but are not MIL qualified. Military part numbers are for reference only. 

ARINC 600 Wire Wrap Socket Contacts, 

Front Release 

Contact Size/Type 

22 Socket - Wire Wrap (1) 

L = .250 (6.35) 


L = .375 (9.52) 


L = .500 (12.7) 


L = .641 (16.3) 

ARINC 600 PC Tail Socket Contacts, 

Front Release 

Contact Size/Type 

22 Socket - PC Tail 

.115 (2.92) (Nom.) Post Extension 

22 Socket- PC Tail 








Amphenol 

Part Number 

AC-782291-801 

AC-782292-801 

AC-782293-801 

AC-782294-801 

Amphenol 

Part Number 

AC-782206-801 

AC-782202-801 

AC-782200-801 

AC-782203-801 

AC-782204-801 

Filler Plugs 

Contact Cavity Amphenol 

Size Part Numbers Color 

22 AC-660022-701 Black 

20 AC-660020-701 Red 

16 AC-660016-701 Blue 

12 AC-660012-701 Yellow 

8 Coax AC-660008-701 Red 

5 Coax (Plug) AC-660005-701 White 

5 Coax (Recept.) AC-660004-701 White 

Note: Filler plugs are for non-environmental connectors. 

Sealing Plugs 

Contact Cavity Amphenol 

Size Part Numbers Color 

22 AC-660022-801 Black 

20 AC-660020-801 Red 

16 AC-660016-801 Blue 

12 AC-660012-801 Yellow 

8 Coax AC-660008-801 Red 


11


contact data, cont., protective covers, O-rings 

ARINC 600 Coax and Concentric Twinax Contacts 

** To complete order number consult Amphenol Canada Corporation. 

For installation instructions for ARINC 600 coaxial contacts, see L-2078. 

Note: 

FR-RR designates Front Release, Rear Removable 

RR-RR designates Rear Release, Rear Removable 

FR-FR designates Front Release, Front Removable 

Protective Covers 

Conductive covers for ARINC 600 connectors can be ordered from charts below. These covers are designed to protect 

equipment against the risks of electrostatic discharge, and are made of self-extinguishing polyethylene with graphite filler. 

For availability of clear, non-conductive covers consult Amphenol Canada Corporation. 

Receptacle Conductive Covers 

Plug Conductive Covers 

O-Rings 

For environmentally sealed connector style, Class E. 

To order separate waveguides for ARINC 600 Connectors, consult Amphenol Canada Corporation. 

12


how to order 

Amphenol "A" Series Connectors 

To more easily illustrate ordering procedure for ARINC 600, "A" Series connectors, 

part number AD3-310-30001FO is shown as follows: 

Connector Series 

A designates Amphenol ARINC 600 

CIass 

D - Non-environmental (rear release, crimp contacts) 

E - Environmental (rear release, crimp contacts) 

F - Non-environmental (front release, solder and wrap post #22 contacts, rear release all others). 

C - Same as E, less O-rings on plug side. 

S - Environmental (O-ring is used to seal between connector shell and insulators) with rear release, crimp contacts. 

Y - All positions front release (except coax/triax) 

J - All positions front release (all sizes) 

Shell Size 

1 - Max. contact capacity - 160 



Connector Layout Designator 

Common available ARINC 600 configurations are listed below for shell sizes 1 and 2, and on the next page for shell size 3. 

The connector layout designator number represents the total number of contacts within the layout including waveguides. 

Consult Amphenol Canada Corporation for further availability of insert combinations. 

(Chart continues with shell size 3 configurations on next page) 

13


how to order, cont. 

Connector Layout Designator, cont. 

Common available ARINC 600 configurations are listed below for shell size 3. 

The connector layout designator number represents the total number of contacts 

within the layout including waveguides. Consult Amphenol Canada Corporation 

for further availability of Insert combinations. 

Shell Style 

3 - Plug (rack side) 

4 - Receptacle (box side) 

14


how to order, cont. 

Connector Mounting Modifier 

00 - Standard design, .148 dia. holes 

01 - With #6-32 ESNA (#12 NCFMA2-62) 

clinch nuts (see chart) 

02 - Size 1 receptacle only - less 3 

printed circuit board mounting lugs 

03 - With #4-40 ESNA (#22 NCFMA2-40) 

clinch nuts (see chart) 

Mounting Modifiers with Clinch Nuts 

Darkened areas in diagrams indicate clinch nut positions. 

Connector Mounting Modifier, cont 

08 - Size 2 and 3 plug and receptacle only with #4-40 ESNA (#22 NCFMA2-40) clinch nuts (all mounting holes) 

09 - Size 2 and 3 plug and receptacle only with #6-32 ESNA (#12 NCFMA2-62) clinch nuts (all mounting holes) 

10 - Size 2 connectors with #4-40 ESNA (#22NCFMA2-40) clinch nuts installed in two mounting holes between cavities B and C 

11 - Size 2 connectors with #6-32 ESNA (#12NCFMA2-62) clinch nuts installed in two mounting holes between cavities B and C 

17 - Nickel and EMI, std. .148 holes 

18 - Nickel and EMI with #6-32 clinch nuts (09) 

23 - With floating eyelets ( .048 min. radial float) 4 corner holes per connector 

89 - Nickel plating, std. .148 holes 

AA - 01 MOD and Nickel plated 

AB - Nickel plated and #4-40 clinch nuts all holes (08 & 09) 

AC - Nickel plated and #6-32 clinch nuts (09) 

AD - #4-40 clinch nuts in size 2 shell (6 places as shown) 

Consult factory if other modifications are required. 

Polarizing Position 

01 thru 216 (per ARINC 600) See listing of available keying positions, pages 4 and 5. 

00 - Polarizing posts or keys not installed but supplied with connector 

Modifier (Contact, Finish, Material)* 

OO - Rear release, crimp, signal and power contacts supplied with connector (when applicable) 

FO - Contacts not supplied with connector (FO not stamped on connector) 

FR - Front release all contacts 

SA - Front release .025 (0.63) D. x .150 (3.81) solder post and crimp, rear release power contacts 

(when applicable) supplied installed in connector 

SB - Front release .025 (0.63) D. x .250 (6.35) solder post and crimp, rear release power contacts 


SC - Front release .025 (0.63) D. x .375 (9.53) solder post and crimp, rear release power contacts 


SD - Front release .025 (0.63) D. x .500 (12.7) solder post and crimp, rear release power contacts 


WA- Front release .025 (0.63) Sq. x .250 (6.35) (1 wrap) wrap post and crimp, rear release power contacts 


WB - Front release .025 (0.63) Sq. x .375 (9.53) (2 wraps) wrap post and crimp, rear release power contacts 


WC - Front release .025 (0.63) Sq. x .500 (12.7) (3 wraps) wrap post and crimp, rear release power contacts 


WD - Front release .025 (0.64) Sq. x .641 (16.28) (3 wraps) wrap post and crimp, rear release power contacts 


* All modifiers (contact, finish, material) at end of part number are alpha (not numerical). 

NOTE: Coaxial Contacts to be ordered separately. 


Dimensions subject to change. 

15

Additional ARINC Products 

ARINC 404 

ARINC 404 Series 

Amphenol "AR" Series Rack and Panel Connectors meet or exceed the requirements 

of MIL-C-81659 and ARINC Specification 404. The "AR" Series is a multi-purposed 

connector used in aerospace, military, and computer periphery applications. 

Design features include: 

• Five shell styles with up to four insert cavities 

• Inserts accommodate signal and power contacts, sizes 12, 16, 20 and 22 

• Coaxial contacts available in sizes 5, 9 and 11 

• Up to 424 contacts in one connector 

• Non-environmental and environmentally sealed connectors offered 

• Transient protection design available 

For detailed information on ARINC 404 Connectors ask for brochure SL-378-3. 

16

Amphenol Corporation 

Amphenol Canada 

20 Melford Drive 

Scarborough, ON M1B 2X6 

Canada 

Phone: 416-291-4401 

Fax: 416-292-0647 


40-60 Delaware Avenue 

Sidney, NY 13838-1395 

Phone: 607-563-5453 

Fax: 607-563-5351 

SALES OFFICES 


22952 Alcade Drive 

Suite 110 

Laguna Hills, CA 92653 

Phone: 949-855-4454 

Fax: 949-855-9115 


57 E. Hattendorf Ave. 

Suite 150 

Roselle, IL 60172 

Phone: 630-893-1713 

Fax: 630-893-3958 


7506 East Independence Blvd. 

Charlotte, NC 28227 

Phone: 704-531-9053 

Fax: 704-531-9054 

DISTRIBUTORS 

Aeroflite Enterprises Inc. 

265 Gemini Avenue 

Brea, CA 92821 

Phone: 714-773-4251 

Fax: 714-773-1148 

Powell Electronics 

4848 South Island Avenue 

Philadelphia, PA 19153 

Phone: 215-937-7014 

800-347-0900 

Fax: 215-937-4622 

MEXICO 


Presidente Mazaryk No. 61-2 

C.P. 11570 Mexico D.F. 

Mexico 

Phone: (52-5) 254-7283 

Fax: (52-5) 531-9659 

Europe 

AUSTRIA 

Amphenol Ges mbH 

Tautenhayngasse 22 

A-1150 Wien (Vienna) 

Austria 

Phone: (43-1) 985-15-11 

Fax: (43-1) 982-61-01 

Telex: (847) 132661 AMPHW A 

ENGLAND 


Thanet Way, Whitstable 

Kent CT5 3JF 

England 

Phone: (44-227) 773200 

Fax: (44-227) 276571 

Telex: (851) 96157 AMPHNL G 


Spectra Strip LImited 

Romsey Industrial Estate 

Greatbridge Road 

Romsey, Hampshire S05 OHR 

England 

Phone: (44-794) 517575 

Fax: (44-794) 516246 

Telex: (851) 47467 

GERMANY 

Amphenol-Tuchel Electronics 

GmbH 

August-Haeusser Strasse 10 

Postfach 3469 

74001 Heilbronn 

Germany 

Phone: (49-7131) 929 0 

Fax: (49-7131) 929 323 

Telex: (841) 728 816 ATEHN D 

ITALY 

Amphenol Italia S.P.A. 

Galleria Gandhi, 2-27 

20017 Mazzo di Rho 

Milano 

Italy 

Phone: (390-2) 935-03190 

Fax: (390-2) 935-03206 

Telex: 334623 AMPHIT I 

NETHERLANDS 

Amphenol Benetux B.V. 

P.O. Box 63 

3990 DB Houten 

The NetherIands 

Phone: (31-3403) 78754 

Fax: (31-3403) 77899 

Telex: (844) 40794 AMPHNL NL 

SWEDEN 

Amphenol Scandinavia 

Johannelundsvagen 2 

194 02 Upplands Vaesby 

P.O. Box 2047 

Sweden 

Phone: (46-8) 590-77100 

Fax: (46-8) 590-33800 

Near East 

ISREAL 

Bar-Tec Ltd. 

P.O. Box 279 

KFAR-SAVA 

44102 

Phone: (972-9) 764 4100 

Fax: (972-9) 767 4324 

Far East 

HONG KONG 

Amphenol East Asia Ltd. 

Unit Nos. 705-6, 7Fl. Block B 

Hung Hom Commercial Center 

37-39 Ma Tau Wai Road 

Hung Hom Kowloon 

Hong Kong 

Phone: (852) 362-0787 

Fax: (852) 764-7910 

TAIWAN 


12 Hsin-Pei-Yuan Road 

Chugnli Industrial Zone 

Taoyuan Hsien, Taiwan, R.O.C. 

Phone: (886-3) 462-9445 

Fax: (886-3) 451-4062 

SINGAPORE 


80 Genting Lane 

09-04 Genting Block 

Ruby Industrial Complex 

Singapore 1334. 

Phone: (65) 7433022 

Fax: (65) 7432466 

Telex: RS 23499 AMPHNL 

INDIA 

Amphetronix Lld. 

105 Bhosari Industrial Area 

PosI Box No. 1 

Poona, 411 026 

India 

Phone: (91-212) 790363 

Fax: (91-212) 790581 

Telex: (953) 146237 

JAPAN 

Nippon Interconnect 

Company 

689-1, Aza Nogami, Iseochi 

Ritto-Cho, Shiga 520-30 

Japan 

Phone: (81-3) 3263-5611 

Fax: (81-3) 5276-7059 

Africa 

SOUTH AFRICA 

Pace Electronic Components 

(PTY) Ltd. 

Cnr. Vanacht & Gewel Streets 

P.O. Box 701, Isando 1600 

South Africa 

Phone: 27-11-974-1211 

Fax: 27-11-974-1271 

AustraIia 

Australia & New Zealand 


55 Saint Vincent St. 

Port Adelaidea 

South Australia 6016 

Phone: (61-8) 341-0665 

Fax: (61-8) 341-1588 

Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are 

believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind expressed or implied. Statements or suggestions concerning possible use of our products 

are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are 

indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors. 

© 2002 Amphenol Corp. Printed in Canada 02/02

ARINC 404 (scans) - Amphenol Canada

Create successful ePaper yourself

Delete template?

Save as template?