lukoil genesis premium

Table of Contents 

Passenger 

Premium engine Oils 

LUKOIL GENESIS PREMIUM ....................................................................4 

LUKOIL GENESIS FE .................................................................................6 

engine Oils 

LUKOIL LUXE SYNTHETIC .........................................................................7 

LUKOIL LUXE ..............................................................................................9 

LUKOIL LUXE TURBO DIESEL ..................................................................11 

LUKOIL SUPER ..........................................................................................12 

LUKOIL STANDART ..................................................................................13 

LUKOIL FLUSH SERVICE OIL ..................................................................14 

LUKOIL MOTO 2T ...................................................................................15 

LUKOIL MOTO 4T ...................................................................................16 

LUKOIL MOTO GARDEN .......................................................................17 

LUKOIL MOTO OUTBOARD ..................................................................19 

Technical Fluids 

LUKOIL ANTIFREEZE ..............................................................................21 

LUKOIL ANTIFREEZE EXTRA G11 ..........................................................22 

LUKOIL ANTIFREEZE ULTRA G12 ..........................................................23 

LUKOIL WINDSCREEN WASHER ..........................................................24 

Commercial 

engine Oils 

LUKOIL AVANTGARDE PROFESSIONAL LA .........................................26 

LUKOIL AVANTGARDE PROFESSIONAL LS .........................................27 

LUKOIL AVANTGARDE PROFESSIONAL ..............................................28 

LUKOIL AVANTGARDE ULTRA ................................................................29 

LUKOIL AVANTGARDE EXTRA ................................................................31 

LUKOIL AVANTGARDE ............................................................................32 

LUKOIL DIESEL M-8G2K, M-10G2K....................................................33 

LUKOIL DIESEL M-8DM, M-10DM .......................................................34 

Transmission 

TransmissiOn Oils 

LUKOIL TRANSMISSION TM-5 .............................................................36 

LUKOIL TRANSMISSION TM-4 .............................................................37 

LUKOIL TRANSMISSION TM-4/5 ........................................................38 

LUKOIL ATF...............................................................................................39 

LUKOIL ATF SYNTH MULTI .....................................................................40 

LUKOIL ATF SYNTH ASIA .......................................................................41 

LUKOIL ATF SYNTH HD .........................................................................42 

LUKOIL GEYSER MM ..............................................................................43 

LUKOIL TSp-15k .....................................................................................44 

Industrial and Special 

hydraulic Oils 

LUKOIL GEYSER ZF .................................................................................46 

LUKOIL GEYSER LT ..................................................................................47 

LUKOIL GEYSER ST ..................................................................................48 

LUKOIL IGS ..............................................................................................49 

LUKOIL IGP ...............................................................................................50 

LUKOIL VMGZ .........................................................................................51 

LUKOIL MGE-10A ...................................................................................52 

LUKOIL MGE-46V ...................................................................................53 

LUKOIL AU ...............................................................................................54 

cOmPressOr Oils 

LUKOIL STABIO ........................................................................................55 

LUKOIL STABIO SYNTHETIC ..................................................................56 

LUKOIL K3-10N, K2-24, KS-19p .........................................................57 

reducTOr Oils 

LUKOIL STEELO ........................................................................................58 

LUKOIL STEELO RS ..................................................................................59 

LUKOIL STEELO LT....................................................................................60 

LUKOIL I-T-D .............................................................................................61 

slide Way Oils 

LUKOIL ADVANTO ..................................................................................62 

LUKOIL SLIDO ..........................................................................................63 

Turbine Oils 

LUKOIL TORNADO T ..............................................................................64 

LUKOIL TP-22s .........................................................................................65 

LUKOIL TP-30 ...........................................................................................66 

marine Oils 

LUKOIL NAVIGO TPEO...........................................................................67 

TracTOr Oils 

LUKOIL VERSO ........................................................................................68 

LUKOIL VERSO MOTOR .........................................................................69 

TransFOrmer Oils 

LUKOIL VG ...............................................................................................70 

indusTrial Oils 

LUKOIL SUPPORTO .................................................................................71 

LUKOIL INTEGO ......................................................................................72 

LUKOIL I-20, I-40, I-50 ..........................................................................73 

LUKOIL ASSISTO T ..................................................................................74 

gas engine Oils 

LUKOIL EFFORSE .....................................................................................75

General Information 

LUKOIL is a major international vertically-integrated oil & gas company, 

accounting for 2.2% of global crude oil output. 

LUKOIL was established in 1991 by merging a group of oil-and-gas production 

companies located in the Western Siberian cities of Langepas, 

Urai and Kogalym. The initial letters of these cities were derived to form 

the acronym LUK. 

LUKOIL, one of the world’s largest oil companies, operates on the principle 

“From the Wellhead Down to the Gas Station,” meaning that it is active 

in oil production, refining, wholesale and retail sale of petroleum products. 

The Company’s marketing network encompasses 22 countries worldwide, 

including Russia, CIS countries (Ukraine, Belarus, Azerbaijan, 

Moldova), EU countries (Finland, Poland, Romania, Bulgaria, Hungary, 

the Czech Republic, Georgia, Lithuania, Latvia, Croatia, Estonia, Belgium, 

Cyprus), Turkey, Serbia, Macedonia, Montenegro, and the United States. 

The company accounts for 1.0% of global oil reserves and 2.2% of global 

oil production. 

LUKOIL’s operations are organized into three business segments: 

Exploration and Production (E&P); Refining, Marketing and Distribution; 

and Petrochemicals. 

The E&P segment includes exploration, development, and production operations 

relating to crude oil and natural gas. These activities are located 

primarily within Russia, with additional activities based in Azerbaijan, 

Kazakhstan, Uzbekistan, the Middle East, Colombia, and northern 

and western Africa. 

The Refining, Marketing, and Distribution segment includes refining 

and transport operations, as well as marketing and trading of crude oil, 

natural gas, and refined products. LUKOIL runs four main oil refineries in 

Russia with a combined refining capacity of approximately 45.1 mln t, 

and refineries outside Russia (Odessa (Ukraine), Burgas (Bulgaria), 

Ploiesti Refinery (Romania), Helsinki (Finland), and Izmir (Turkey)). 

The company is focused on increasing product volume exported as well 

as expanding geographical diversity. LUKOIL’s retail network spans 

30 countries, including Russia, the Baltic States, the CIS and Europe. 

In December 2010 we commissioned a catalytic cracking facility at our 

Nizhny Novgorod refinery, the largest catalytic cracking facility built 

in Russia for the last 25 years, enabling production of gasoline which 

is fully compliant with Euro-5 standards. 

LUKOIL’s petrochemical business is the largest in Russia and Eastern Europe. 

LUKOIL has four major petrochemical plants producing various pyrolysis 

and organic synthesis products, fuel fractions, and polymer products. 

1

2 

LUKOIL Lubricants 

The production and sale of oils and lubricants plays an important part in LUKOIL’s 

business. In 2005 LLK-International (LUKOIL Lubricants), a wholly-owned subsidiary 

of LUKOIL, was formed, and lubricants were spun off as a standalone business 

unit. LUKOIL Lubricants has become a unified responsibility center for this 

business segment, which allows LUKOIL to consolidate accounting and ensure 

unbiased evaluation of financial performance, react to market fluctuations, improve 

and develop lubricant production, conduct research, and optimize lubricant 

marketing. 

LUKOIL Lubricants produces a wide array of products that meet the most advanced 

operating requirements and specifications of both Russian and foreign vehicle 

and equipment manufacturers. This array includes base oils (used as inputs 

for production of ready-to-use oils and lubricants) and industrial oils for use in factory 

equipment, as well as motor and transmission oils for all types of transport. 

Today LUKOIL Lubricants controls the manufacture of more than 40% of all lubricants 

produced in Russia, amounting to around 1.3 mln t, and markets these products 

in more than 40 countries across the globe. 

LUKOIL Lubricants commands extensive resources enabling it to develop advanced 

technologies for the manufacture of lubricants and additives. At its inception, 

the company set up the Science and New Technology Department in charge 

of developing know-how technologies and the formula for new types of highquality 

lubricants, which advanced engineering requires. This work is performed 

by company specialists in close cooperation with Russian and leading world scientific 

organizations. By investing in science, LUKOIL Lubricants aims to enhance 

the quality of its product line and boost consumer demand for those products.

Passenger

4 

Passenger Premium Engine Oils 

LUKOIL GENESIS PREMIUM 

aPi SN/CF 

sae 5W-30 

approved by: MB-Approval 229.51; VW 502 00 / 

505 00; BMW LL-04 

licensed: API SN; GM dexos2 

meets requirements: API CF; ACEA A3/B4-08, С3-08; Renault 

RN 0700, 0710 

Volume (l): 1, 4, 5, 18, 50, 216.5 

brieF descriPTiOn 

LUKOIL GENESIS PREMIUM is an ultra high performance synthetic multigrade engine oil. This oil 

is formulated for use in passenger cars and light commercial vehicles, including engines with after 

treatment systems. 

Formulated with synthetic base stocks and an advanced additive technology, LUKOIL GENESIS 

PREMIUM provides a reduced level of sulphated ash, phosphorus and sulphur (low SAPS) in service. 

The LUKOIL GENESIS PREMIUM series has advanced sludge, wear and corrosion protection, 

excellent piston cleanliness and ring sticking characteristics, provides very good low temperature 

performance and was specifically designed for use as a catalyst compatible oil in vehicles with 

diesel particulate filters (DPF) and three way catalysts (TWC) in high performance car and light van 

diesel and gasoline engines that require low friction, low viscosity, and low SAPS oils. 

aPPlicaTiOn 

LUKOIL GENESIS PREMIUM is recommended for year-round use in high performance gasoline and 

direct-injection diesel engines operating under severe conditions with extended drain intervals as 

defined by the engine manufacturer. 

LUKOIL GENESIS PREMIUM contributes to extended service life and efficiency of post treatment 

systems without compromising engine durability. Its low SAPS technology helps reduce harmful 

deposit build-up in vehicle diesel particulate filters (DPF) and increase exhaust post treatment system 

service life.


LUKOIL GENESIS PREMIUM 

aPi SN/CF 

sae 5W-40 

approved by: MB-Approval 229.51; VW 502.00 / 505.00 / 

505.01; BMW LL-04; Renault RN 0700, 

0710; Ford WSS-M2C917-A; Porsche A 40 

licensed: API SN; GM dexos2 

meets requirements: API CF; ACEA A3/B4-08, С3-08 

Volume (l): 1, 4, 5, 18, 50, 216.5 


LUKOIL GENESIS PREMIUM is an ultra high performance synthetic multigrade engine oil. This oil 

is formulated for use in passenger cars and light commercial vehicles, including engines with after 

treatment systems. 

Formulated with synthetic base stocks and an advanced additive technology, LUKOIL GENESIS 

PREMIUM provides a reduced level of sulphated ash, phosphorus and sulphur (low SAPS) in service. 

The LUKOIL GENESIS PREMIUM series has advanced sludge, wear and corrosion protection, 

excellent piston cleanliness and ring sticking characteristics, provides very good low temperature 

performance and was specifically designed for use as a catalyst compatible oil in vehicles with 

diesel particulate filters (DPF) and three way catalysts (TWC) in high performance car and light van 

diesel and gasoline engines that require low friction, low viscosity, and low SAPS oils. 

aPPlicaTiOn 

LUKOIL GENESIS PREMIUM is recommended for year-round use in high performance gasoline and 

direct-injection diesel engines operating under severe conditions with extended drain intervals as 

defined by the engine manufacturer. 

LUKOIL GENESIS PREMIUM contributes to extended service life and efficiency of post treatment 

systems without compromising engine durability. Its low SAPS technology helps reduce harmful 

deposit build-up in vehicle diesel particulate filters (DPF) and increase exhaust post treatment system 

service life. 

5

6 


LUKOIL GENESIS FE 

aPi SN / CF 

sae 5W-20 / 5W-30 

licensed: API SN; ILSAC GF-5; GM dexos1 

meets requirements: API CF; Ford WSS-M2C-930-A (SAE 5W-20), 

Ford WSS-M2C-929-A (SAE 5W-30) 

Volume (l): 1, 4, 5, 18, 50, 216.5 


LUKOIL GENESIS FE is an ultra high performance synthetic multigrade engine oil series thatprovides 

remarkable low temperature performance. The oil is highly recommended as service fill oil in 

vehicles covered by a warranty and in the post warranty period, too. 

LUKOIL GENESIS FE provides excellent low temperature pumpability and engine cold start, reliable 

protection against wear and corrosion in severe urban cycle conditions. Special attention is paid 

to the detergent-dispersant and antioxidation properties. There are no harmful effects on the car’s 

catalytic converter. Car manufacturers’ energy-efficiency characteristics and requirements on lowviscosity 

oils are taken into account. The oil conserves fuel and reduces emissions and is licensed by 

API as resource conserving. Adapted to operate at higher revs. 

aPPlicaTiOn 

LUKOIL GENESIS FE are recommended for modern vehicles, including the high-performance turbocharged, 

supercharged gasoline multi-valve fuel injected engines found in passenger cars, SUVs, 

light vans and trucks.

Passenger Engine Oils 

LUKOIL LUXE SYNTHETIC 

aPi SN / SM / CF 

sae 5W-40 

approved by: MB-Approval 229.5; VW 502.00 / 505.00; 

BMW LL-01; Renault RN 0700, 0710; 

Porsche A40 

licensed: API SN 

meets requirements: ACEA A3/B4-10 

Volume (l): 1, 4, 5, 18, 50, 216.5 


Premium synthetic multigrade engine oil. Highly recommended for use in modern turbocharged 

gasoline and diesel engines of passenger cars and commercial vehicles. 

adVanced PerFOrmance 

› Provides easy engine cold start owing to low temperature characteristics; 

› Provides reliable engine protection against wear and corrosion under the most severe operating 

conditions; 

› Prevents formation of high- and low-temperature deposits in the engine; 

› Neutral to the vehicle catalytic converter; 

› Has advanced antioxidation properties. 

7

8 


LUKOIL LUXE SYNTHETIC 

aPi SL / CF 

sae 5W-30 

approved by: Renault RN 0700; Ford WSS-M2C913-C 

licensed: API SL, ILSAC GF-4 

meets requirements: ACEA A5/B5-08; Ford WSS-M2C913-А, 

WSS-M2C913-В 

Volume (l): 1, 4, 5, 18, 50, 216.5 


Premium synthetic energy saving multigrade engine oil. Highly recommended for use in all modern 

turbocharged gasoline and diesel engines of passenger cars, vans and light trucks. 


› Provides significant Fuel Economy performance; 

› Provides easy engine cold start owing to low temperature characteristics; 

› Provides reliable engine protection against wear, corrosion and high and low temperature 

deposits even under the frequent stop and start city driving conditions; 

› Increases engine performance and reduces noise; 

› Has advanced antioxidation properties.


LUKOIL LUXE 

aPi SL / CF 

sae 5W-30 / 5W-40 / 10W-40 

approved by: AVTOVAZ; ZMZ 

licensed: API SL 

meets requirements: ACEA A3/B3-04, A3/B4-04; MB 229.1 

Volume (l): 1, 4, 5, 18, 50, 216.5 


High quality, semi-synthetic multigrade engine oil. For use in modern turbocharged gasoline and 

diesel engines of passenger cars, microbuses and light trucks. 


› Provides easy engine cold start; 


conditions; 


› Neutral to vehicle catalytic converter; 

› Improves engine performance and reduces noise. 

9

10 


LUKOIL LUXE 

aPi SL / CF 

sae 15W-40 


meets requirements: ACEA A3/B3-04, A3/B4-04; MB 229.1 

Volume (l): 1, 4, 5, 18, 50, 216.5 


High quality, mineral multigrade engine oil. For use in modern 

turbocharged gasoline and diesel engines of passenger cars, 

microbuses and light trucks. 



conditions; 


› Neutral to vehicle catalytic converter; 

› Improves engine performance and reduces noise.


LUKOIL LUXE TURBO DIESEL 

aPi CF 

sae 10W-40 

meets requirements: ACEA A3/B3-04, А3/B4-04 

Volume (l): 1, 4, 5, 18, 50, 216.5 


High quality, semi-synthetic multigrade diesel engine oil. For use in modern 

turbocharged direct injection diesel engines of passenger cars, vans and light 

trucks. 


› Specially adapted for diesel fuel with high sulphur content; 

› Provides easy engine cold start; 

› Effectively protects engine against wear, corrosion and high-temperature deposits under the 

frequent stop and start city driving conditions; 

› Ensures good anti-oxidation and dispersing properties; 

› Optimises anti-pollution systems, such as Diesel Particulate Filter; 

› Reduces oil consumption in used cars with diesel engines; 

› Provides high protection for diesel turbines. 

11

12 


LUKOIL SUPER 

aPi SG / CD 

sae 5W-40 / 10W-40 / 15W-40 / 20W-50 


Volume (l): 1, 4, 5, 18, 50, 216.5 


High quality, semi-synthetic (SAE 5W-40, 10W-40) and mineral (SAE 

15W-40, 20W-50) multigrade engine oils. For use in gasoline and 

low turbo-charged diesel engines of passenger cars and commercial 

vehicles. 


› Ensure high anti-oxidation and dispersancy properties; 

› Prevent the formation of high- and low-temperature deposits in the engine; 

› SAE 5W-40 and 10W-40 viscosity grade oils provide easy engine cold start; 

› SAE 20W-50 viscosity grade oil reduces oil consumption, wear and noise level (especially in 

worn engines) under extended road conditions and in a hot climate.


LUKOIL STANDART 

aPi SF / CC 

sae 10W-30 / 10W-40 / 15W-40 / 

20W-50 

meets requirements: AVTOVAZ 

Volume (l): 1, 4, 5, 18, 50, 216.5 


Mineral multigrade engine oils. For use in moderate and hot 

(SAE 20W-50) climate zones as basic oils for gasoline and 

turbocharged diesel engines of passenger cars and commercial 

vehicles. 


› Provide good anti-oxidation and dispersancy properties; 

› Keep engine parts clean, prevents high- and low-temperature deposit formation; 

› SAE 20W-50 viscosity grade oil reduces oil consumption, wear and noise level (especially 

in worn engines) under extended road conditions and in a hot climate. 

13

14 


LUKOIL FLUSH SERVICE OIL 

approved by: AVTOVAZ 

Volume (l): 4; 20; 216.5 


Mineral oil with a compound of highly effective detergent additives. For 

flushing vehicle engine lubrication systems without disassembly when the 

motor oil is changed. Quickly and efficiently removes deposits from the 

engine lubrication system. Provides high detergent, anti-corrosion and antiwear 

properties. 


› Effectively removes deposits from engine lubrication system parts; 

› Considerably reduces the probability of overheating; 

› Minimises wear of the engine rubbing parts; 

› Regular flushing of the oil system significantly extends engine service life.


LUKOIL MOTO 2T 

aPi TC 

meets requirements: JASO FB 

Volume (l): 1 


LUKOIL МОТО 2Т – modern, high-quality, mineral multigrade oil, designed for 

2-Stroke gasoline engines of motorcycles, mopeds, scooters and snowmobiles. 

LUKOIL МОТО 2Т has good detergent, antioxidant and antiwear properties, 

guaranteeing excellent engine performance under any operating conditions. 

LUKOIL МОТО 2Т is formulated with high-quality base stocks and a highly-effective advanced 

ashless package of additives, which provides perfect protection for the engine even under the most 

severe operating conditions, significantly decreases the risk of sludge and deposits forming in the 

outlet system, reduces disruption of the spark plugs and the risk of surface ignition, provides greater 

engine efficiency, reduces fuel consumption. Owing to the careful formulation, LUKOIL MOTO 2T is 

virtually smokeless and is environmentally friendly. 

aPPlicaTiOn 

LUKOIL МОТО 2Т is recommended for use in modern 2-Stroke engines of motorcycles, mopeds, 

scooters and snowmobiles. The proportion of the mix must comply with the Operation and 

maintenance manual, but normally is fuel:oil = 50:1. 

15

16 


LUKOIL MOTO 4T 

aPi SL 

sae 10W-30 

approved by: JASO MA2 

Volume (l): 1, 4, 5, 18, 50, 216.5 


LUKOIL МОТО 4Т – modern, high-quality, semi-synthetic, multigrade premium 

oil, designed for 4-Stroke gasoline engines of motorcycles, mopeds, scooters and 

snowmobiles. 

LUKOIL МОТО 4Т provides highly-effective protection for the engine, perfect transmission operation 

and optimum clutch performance, has excellent detergent and antioxidant performance, improved 

antiwear, anticorrosion and antifoam properties. It has demonstrated incredible results when 

operating at low temperatures, as well as high friction performance, which guarantees excellent 

clutch performance even under the most severe operating conditions. 

LUKOIL МОТО 4Т is formulated with high-quality base stocks, synthetic components and a highlyeffective 

advanced package of additives produced by one of the best additive manufactures in 

the world, which provides perfect protection for the engine and transmission under the most severe 

operating conditions and extends the lifetime of your vehicle. 

LUKOIL МОТО 4Т meets or exceeds the requirements of all Japanese and American motorcycle 

manufactures. 

aPPlicaTiOn 

LUKOIL МОТО 4Т is recommended for use in modern 4-Stroke high- and mid-performance engines 

of motorcycles, mopeds, scooters and snowmobiles, is an ideal lubricant for racing motorcycles and 

cross bike engines, including turbocharged ones. It is used for transmissions and clutches of modern 

motorcycles when required.


LUKOIL MOTO 2T GARDEN 

aPi TC 

approved by: JASO FD 

meets requirements: ISO-L-EGD; Husqvarna 

Volume (l): 1 


LUKOIL МОТО 2Т GARDEN – modern, high-quality, mineral premium oil, designed 

for 2-Stroke gasoline small engines of garden equipment. 

LUKOIL МОТО 2Т GARDEN is formulated with high-quality base stocks and a highly-effective 

advanced ashless package of additives made by one of the best additive manufactures in the world. 

LUKOIL МОТО 2Т GARDEN provides excellent detergent, antioxidant, antiwear and lubricating 

properties. The low quantity of ash significantly decreases the risk of sludge and deposits forming on 

the inner surfaces of the engine, reduces disruption of the spark plugs and the risk of surface ignition, 

provides greater engine efficiency, reduces fuel consumption and makes the oil smokeless and 

environmentally friendly. 

Owing to the careful formulation, LUKOIL МОТО 2Т GARDEN provides antiwear, highly-effective 

protection for the engine even under the most severe operating conditions and extends the lifetime 

of your garden equipment. 

aPPlicaTiOn 

LUKOIL МОТО 2Т GARDEN is recommended for use in 2-Stroke engines of lawn mowers, 

chain saws, cultivators and tillers. The proportion of the mix must comply with the Operation and 

maintenance manual, but normally is fuel:oil = 50:1. 

17

18 


LUKOIL MOTO 4T GARDEN 

aPi SG 

sae 30 

meets requirements: API SG 

Volume (l): 1 


LUKOIL МОТО 4Т GARDEN – modern, high-quality, mineral premium oil, designed for 

4-Stroke small gasoline engines of garden equipment. 

LUKOIL МОТО 4Т GARDEN is formulated with high-quality base stocks and a highly-effective 

advanced package of additives made by one of the best additive manufactures in the world. 

LUKOIL МОТО 4Т GARDEN has excellent detergent and antioxidant performance, improved 

antiwear, anticorrosion and antifoam properties, which provide perfect protection for the engine 

under the most severe operating conditions. 

LUKOIL МОТО 4Т GARDEN guarantees reliable protection of your garden equipment. 

aPPlicaTiOn 

LUKOIL МОТО 4Т GARDEN is recommended for use in modern 4-Stroke engines of lawn mowers, 

chain saws, cultivators, tillers and other garden equipment.


LUKOIL MOTO 2T OUTBOARD 

meets requirements: NMMA TC-W3 

Volume (l): 1 


LUKOIL МОТО 2Т OUTBOARD – modern, high-quality, mineral premium oil, 

designed as a fuel/oil mixture component for 2-Stroke gasoline engines of 

outboards, boats, yachts, jet skis and personal water craft with both water- and aircooling 

systems. 

LUKOIL МОТО 2Т OUTBOARD is formulated with high-quality base stocks and a highly-effective 

advanced ashless package of additives made by one of the best additive manufactures in the world, 

which significantly decreases the risk of sludge and deposits forming on the inner surfaces and in 

the outlet system of the engine, reduces disruption of the spark plugs and the risk of surface ignition, 

provides greater engine efficiency, reduces fuel consumption. 

Owing to the careful formulation, LUKOIL МОТО 2Т OUTBOARD is smokeless and environmentally 

friendly. 

LUKOIL МОТО 2Т OUTBOARD provides excellent detergent, antiwear and lubricating 

performance, has a low gel formation coefficient, which provide highly-effective protection for the 

engine under the most severe operating conditions and extend the lifetime of your vehicle. 

aPPlicaTiOn 

LUKOIL МОТО 2Т OUTBOARD is recommended for use in modern 2-Stroke high- and midperformance 

water- and air-cooled engines of outboards, boats, yachts, jet skis and personal 

water craft, as well as for all engines where NMMA TC-W, TC-W2, TC-W3 specified oils are 

recommended. The proportion of the mix must comply with the Operation and maintenance manual, 

but normally is fuel:oil = 50:1. 

19

20 


LUKOIL MOTO 4T OUTBOARD 

aPi SL 

sae 10W-30 

meets requirements: NMMA FC-W 

Volume (l): 1 


LUKOIL МОТО 4Т OUTBOARD – modern, high-quality, semi-synthetic premium 

oil, designed for 4-Stroke gasoline engines of outboards, boats, yachts, jet skis and 

personal water craft. 

LUKOIL МОТО 4Т OUTBOARD is formulated with high-quality base stocks, synthetic components 

and a highly-effective advanced package of additives made by one of the best additive 

manufactures in the world. 

LUKOIL МОТО 4Т OUTBOARD has excellent detergent, antiwear and lubricating performance, 

improved anticorrosion and antirust properties, thus ensuring highly-effective protection for the 

engine under any, even under the most difficult and severe conditions, which, in turn, significantly 

extends the lifetime of your outboard transportation. 

aPPlicaTiOn 

LUKOIL МОТО 4Т OUTBOARD is recommended for use in modern 4-Stroke high- and midperformance 

water- and air-cooled engines of outboards, boats, yachts, jet skis and personal water 

craft, as well as for all engines where NMMA FC-W specified oils are recommended.

Passenger Technical Fluids 

LUKOIL ANTIFREEZE 

meets requirements: ASTM D3306; ASTM D4985; BS 6580; 

AVTOVAZ; KAMAZ; GAZ; ZMZ; YaMZ; 

MAZ; MMZ; LiAZ 

Volume (l): 1, 4 


High-quality, antifreeze coolant based on ethylene glycol with 

carboxylic acid salt corrosion inhibitor (carboxylate technology). 

For use in all modern car engines operating at temperature conditions 

above -40°C. 

Free of nitrites, amines, phosphates, borates and silicates. Effectively protects the engine’s cooling 

system against corrosion and prevents scale deposits. Ready to use. Compatible with sealing 

materials. Freezing point: -40°C. 

21

22 


LUKOIL ANTIFREEZE EXTRA G11 

meets requirements: ASTM D 3306; SAE J 1034; MB 325.2; 

Ford ESD-M97B49-A; GM-Opel 

QL130100; GM-Saab 6901 599; VW TL 

774-C (G 11) 



High-quality, antifreeze coolant based on ethylene glycol and 

concentrate from leading manufacturers. For use in engines operating 

at temperature conditions above -40°C. 

Based on organic acid salt and silicate corrosion inhibitors. Free of amines, nitrites, and phosphates. 

Effectively protects the engine’s cooling system against corrosion and prevents scale deposits. 

Ready to use. Fully compatible with LUKOIL ANTIFREEZE G 48.


LUKOIL ANTIFREEZE ULTRA G12 

meets requirements: ASTM D 3306; SAE J 1034; DAF 74002; 

MB 325.3; Ford WSS-M97B44-D; GM- 

Chevrolet/GM-Opel/GM-Saab: GM 

6277M; MAN 324-SNF; MTU MTL 5048; 

VW TL 774-D/F (G-12/G-12+) 



High-quality, antifreeze coolant based on ethylene glycol and 

concentrate from leading manufacturers. For use in all modern car 

engines operating at temperature conditions above -40°C. 

Based on carboxylic acid salt corrosion inhibitors (carboxylate technology). Free of amines, nitrites, 

phosphates, borates, and silicates. Effectively protects all modern engines including heavy duty 

aluminum ones against freezing, corrosion and overheating and prevents scale deposits. Ready to 

use. Fully compatible with carboxylic coolants meeting requirements of VW TL774-D/F (G12). 

23

24 


LUKOIL WINDSCREEN WASHER 

range: LUKOIL WINDSCREEN WASHER WINTER 

-30 °C / -25 °C / -20 °C / -15 °C / 

-10 °C / -5 °C 

LUKOIL WINDSCREEN WASHER SUMMER 

LUKOIL WINDSCREEN WASHER SUMMER 

CONCENTRATE 

Volume (l): 1, 2, 3, 4, 5 


Windscreen washer based on isopropyl alcohol. For windscreen, side and rear car windows 

cleaning. Contains modern synthetic surface-active agents that efficiently remove grease, dirt and 

other organic substances from windows. Neutral to paint-and-lacquer coating of car body and 

rubber and plastic parts. Mild odour.

Commercial

26 

Commercial Engine Oils 

LUKOIL AVANTGARDE PROFESSIONAL LA 

aPi CJ-4 

sae 5W-40 / 15W-40 

approved by: Volvo VDS-4; Mack EO-O Premium Plus; Renault 

RLD-3; MB-Approval 228.31; Cummins CES 20081; 

SAE 5W-40: MAN M3575; DDC 93K218 

licensed: API CJ-4 (exceeds of API CI-4 Plus, CI-4, CH-4, CG- 

4, CF-4) 

meets requirements: ACEA E9-08; CAT ECF-3 

Volume (l): 1, 5 , 18, 50, 216.5, 1000 


LUKOIL AVANTGARDE PROFESSIONAL LA – modern, heavy-duty diesel engine oil specially 

designed in accordance with the latest specifications: ACEA E9-08, API CJ-4 and the world’s leading 

manufacturers’ recommendations. 

LUKOIL AVANTGARDE PROFESSIONAL LA is formulated using highly refined hydrosynthetic base 

stocks and advanced additive technology of foreign production. 

LUKOIL AVANTGARDE PROFESSIONAL LA is recommended for highly rated diesel engines meeting 

Euro-3, 4 and 5 emission requirements and running under severe conditions, e.g., extended oil drain 

intervals according to the manufacturers’ recommendations. 

aPPlicaTiOn 

LUKOIL AVANTGARDE PROFESSIONAL LA is recommended for highly rated diesel engines of trucks 

and buses including vehicles with turbochargers and for most EGR (exhausted gas recirculation) 

engines and most engines fitted with SCR NOx reduction systems and with or without extended oil 

drain intervals. Recommendations may, however, differ between engine manufactures so the Drivers’ 

Manuals/or Dealers should be consulted if in doubt. 

LUKOIL AVANTGARDE PROFESSIONAL , fully meets the ACEA E9 requirements, is strongly 

recommended for engines fitted with particulate filters (DPF) and is designed for use in combination 

with ultra low sulphur diesel (ULSD).


LUKOIL AVANTGARDE PROFESSIONAL LS 

aPi CI-4 

sae 5W-30 / 10W-40 

approved by: MB-Approval 228.51; MTU Cat. 3.1; 

SAE 5W-30: MAN M3477/M3271-1; 

Volvo VDS-3/CNG; Renault RLD / RLD-2 / RGD; 

Mack EO-N/EO-M Plus; Deutz DQC IV-10LA; 

SAE 10W-40: Scania LA; Renault RLD / 

RLD-2 / RXD; Volvo VDS-3; Deutz DQC III-05; 

MAN M3477; Cummins CES 20078 

licensed: API CI-4 

meets requirements: ACEA E4/E6/E7-08; JASO DH-2 

Volume (l): 1, 5 , 18, 50, 216.5, 1000 


LUKOIL AVANTGARDE PROFESSIONAL LS – synthetic oil for diesel engines meets the ACEA E4/E6/ 

E7-08 and API CI-4 requirements designed according to the manufacturer’s recommendations with 

extended drain intervals. It is intended for use in highly rated modern engines meeting Euro-3, 4 and 5 

emission requirements in combination with low sulphur diesel fuel. 

LUKOIL AVANTGARDE PROFESSIONAL LS – low SAPS oil with low level of sulphated ash, 

phosphorus and sulphur is formulated using highly refined synthetic base stocks and advanced 

additive technology of foreign production. 

aPPlicaTiOn 

LUKOIL AVANTGARDE PROFESSIONAL LS is recommended for highly rated diesel engines running 

under severe conditions, e.g., significantly extended oil drain intervals according to the manufacturer’s 

recommendations. It is suitable for vehicles with particulate filters (DPF), and for most EGR engines and 

most engines fitted with SCR NOx reduction systems. 

27

28 


LUKOIL AVANTGARDE PROFESSIONAL 

aPi CI-4 (5W-30) / CF (10W-40) 

sae 5W-30 / 10W-40 

approved by: MB-Approval 228.5; MAN M3277; MTU 

Cat. 3; Volvo VDS-3; Renault RLD-2 / RXD; 

SAE 5W-30: Mack EO-N/EO-M Plus, Deutz 

DQC IV-10; SAE 10W-40: Scania LDF-3; 

Deutz DQC III-05 

meets requirements: API CF (SAE 10W-40); ACEA E4/E7-08; ZF 

TE-ML 04C 

Volume (l): 1, 5 , 18, 50, 216.5, 1000 


LUKOIL AVANTGARDE PROFESSIONAL – synthetic engine oil meets the ACEA E4/E7-08 

requirements designed for diesel engines running under severe conditions with extended drain 

intervals according to the manufacture’s recommendations. 

LUKOIL AVANTGARDE PROFESSIONAL is designed for highly rated diesel engines meeting Euro-3, 4 

and 5 emission requirements. 

LUKOIL AVANTGARDE PROFESSIONAL is formulated using highly refined synthetic base stocks and 

advanced additive technology of foreign production. 

aPPlicaTiOn 

LUKOIL AVANTGARDE PROFESSIONAL is recommended for use in heavy-duty four-stroke 

engines operating under a variety of conditions. It is suitable for most modern engines fitted 

with turbochargers, EGR and SCR NOx reduction systems. Oil drain intervals according to the 

manufacturer’s recommendations.


LUKOIL AVANTGARDE ULTRA 

aPi CI-4/SL 

sae 5W-40 / 10W-30 / 10W-40 / 15W-40 / 

20W-50 

approved by: KAMAZ; YaMZ; SAE 15W-40: 

MB-Approval 228.3; Cummins CES 20078; 

MAN M3275; MTU Cat. 2; Renault Trucks RLD-2; 

Volvo VDS-3; Deutz DQC III-10 

licensed: API CI-4/SL (15W-40) 

meets requirements: ACEA E7-08, A3/B4-04; 

SAE 10W-40: Cummins CES 20071/2/6/7/8; MB 228.3; MAN 

M3275; Volvo VDS-3; Renault Trucks RLD-2/RLD; 

MTU Cat. 2; Mack EO-M Plus; CAT ECF-1-a / ECF-2; Global DHD-1; 

SAE 15W-40: Cummins CES 20071/2/6/7; Mack EO-M Plus; CAT 

ECF-1-a / ECF-2; ZF TE-ML 04, 07C; Global DHD-1; 

SAE 20W-50: MB 228.3; MAN M3275; MTU Cat. 2 

Volume (l): 1, 5 , 18, 50, 216.5, 1000 

29

30 


LUKOIL AVANTGARDE ULTRA 


LUKOIL AVANTGARDE ULTRA is premium quality engine oil series for turbocharged diesel engines 

running under severe conditions with extended drain intervals according to the manufacture’s 

recommendations. 

LUKOIL AVANTGARDE ULTRA are formulated using highly refined mineral and synthetic base 

stocks and advanced additive technology. These oils provide effective control with respect to piston 

cleanliness and bore polishing. They further provide excellent wear control, soot handling and 

lubricant stability. 

LUKOIL AVANTGARDE ULTRA SAE 5W-40, 10W-30 and 10W-40 viscosity grades are semisynthetic 

oils providing cold start-up performance. 

LUKOIL AVANTGARDE ULTRA SAE 20W-50 is specially recommended for vehicles working in hot 

climate conditions. 

aPPlicaTiOn 

LUKOIL AVANTGARDE ULTRA is recommended for use in natural aspirated and turbocharged 

heavy-duty four-stroke engines operating under a variety of conditions where extended drain 

periods are required. It is suitable for most modern engines fitted with EGR and SCR NOx reduction 

systems. 

LUKOIL AVANTGARDE ULTRA series meets the API CI-4 service category requirements and 

applicable for diesel engines where API CI-4, CH-4 and CG-4 oils are recommended. 

LUKOIL AVANTGARDE ULTRA oils are recommended for highly rated diesel engines meeting 

Euro-3, 4 and 5 emission requirements and running under severe conditions, e.g., extended oil 

drain intervals according to the manufacturer’s recommendations. It is suitable for engines without 

particulate filters and for most EGR engines and most engines fitted with SCR NOx reduction 

systems. 

LUKOIL AVANTGARDE ULTRA oils are also intended for use in high performance gasoline engines 

and car & light van direct-injection diesel engines as year-round lubricating oils. These oils are 

suitable for a mixed fleet.


LUKOIL AVANTGARDE EXTRA 

aPi CH-4/CG-4/SJ 

sae 10W-40 / 15W-40 

approved by: KAMAZ; YaMZ; SAE 15W-40: Cummins CES 

20077; MAN M3275-1; MTU Cat. 2; Deutz DQC 

II-10; Volvo VDS-3; MB-Approval 228.3 

licensed: API CH-4/SJ (15W-40) 

meets requirements: 

ACEA E7-08, A3/B4-04; Cummins CES 

20071/2; SAE 10W-40: MB 228.1/229.1; Volvo 

VDS/VDS-2; Mack EO-M Plus 

Volume (l): 1, 5 , 18, 50, 216.5, 1000 


LUKOIL AVANTGARDE EXTRA are semi-synthetic (SAE 10W-40) and mineral (SAE 15W-40) 

multigrade engine oils. 

Accommodate extended replacement intervals. Recommended for turbocharged gasoline and 

diesel engines of passenger cars and commercial vehicles. Adopted for operation with low grade 

fuels. 

Provide advanced anti-oxidation and dispersancy properties. Provide reliable engine protection 

against wear, corrosion and formation of high temperature deposits under the most severe operating 

conditions. 

LUKOIL AVANTGARDE EXTRA SAE 10W-40 has excellent low temperature properties. 

aPPlicaTiOn 

Recommended for a wide range of European, US and Japanese diesel engines both naturally 

aspirated and turbocharged operating under all driving conditions, both on- and off-road, as 

well as for turbocharged gasoline and diesel engines of passenger cars and commercial vehicles. 

Excellent for heavy duty four-stroke turbocharged diesel engines meeting Euro-3 requirements. 

Recommended for mixed fleets. 

31

32 


LUKOIL AVANTGARDE 

aPi CF-4/SG 

sae 10W-30 / 10W-40 / 15W-40 / 20W-50 

approved by: KAMAZ (SAE 10W-30, 10W-40, 15W-40) 

Volume (l): 1, 5 , 18, 50, 216.5, 1000 


LUKOIL AVANTGARDE series consists of high-quality multigrade 

engine oils for heavy duty applications in on-highway service. 

LUKOIL AVANTGARDE oils are blended with specifically selected high quality mineral (SAE 15W- 

40, 20W-50) and semi-synthetic (SAE 10W-40) base stocks, together with proven additive 

technology and viscosity index improver, providing high performance and good durability in 

service. 

aPPlicaTiOn 

LUKOIL AVANTGARDE is recommended for use in diesel or mixed fleet (diesel and gasoline) 

engine operations in on-highway service. This series is intended for lubrication of heavy-duty diesel 

engines, naturally aspirated or turbocharged, working under variable conditions and over a wide 

temperature range whose manufacturers recommend API CF-4 performance level oils in various 

types of service, including engines used in heavy-duty trucks, construction, mining and farming 

equipment. 

LUKOIL AVANTGARDE is formulated with selected technology, also to meet gasoline performance 

requirements for 1993 and older engines according to the API SG category. This offers storage 

simplification and cost effective operation for mixed fleet operators.


LUKOIL DIESEL M-8G2K, M-10G2K 

aPi CC 

sae 20 / 30 

approved by: KAMAZ 

meets requirements: API СС 

Volume (l): 18, 50, 216.5 


LUKOIL DIESEL M-8G2K and М-10G2K are improved monograde mineral motor oils for winter and 

summer operation of road vehicle and tractor diesel engines, respectively. Have high thermal and 

oxidative stability and high resistance to oxidation. Keep the engine clean during operation. Prevent 

high temperature deposits on engine surfaces. Extend drain intervals in comparison with M-8G2 and 

М-10G2 oils, as well as other API CC fluids. 

aPPlicaTiOn 

LUKOIL DIESEL M8G2K and М10G2K are recommended for high powered, naturally aspirated or 

moderately supercharged diesel engines of road vehicles and tractors. They are effectively used in 

engines by KAMAZ, ZIL and other manufacturers. 

33

34 


LUKOIL DIESEL M-8DM, M-10DM 

aPi CD 

sae 20 / 30 

approved by: KAMAZ; YaMZ 

meets requirements: API CD 

Volume (l): 18, 50, 216.5 


LUKOIL DIESEL M-8-DM, M-10-DM are high quality, mineral motor oils for diesel engines with an 

advanced additive package, improving deterging, dispersing, antiwear, anticorrosion, and other 

properties. Have high thermal and oxidative stability and high resistance to oxidation. Keep engine 

clean during operation. Prevent sludge, varnish, and carbon deposits. 

aPPlicaTiOn 

LUKOIL DIESEL M-8-DM, M-10-DM are designed for winter and summer operation, respectively, 

of high powered, turbocharged diesel engines operating under severe conditions. These oils are 

also used in diesel engines with various power and charge, in different road construction machinery 

operating under extreme conditions (mine dump trucks, bulldozers, industrial heavy-duty tractors, 

KAMAZ trucks and similar vehicles, trailer trains, haulers, municipal and intercity buses), as well 

as diesel generators, manufacturing machinery, and farm tractors, where DM series oils are 

recommended.

Transmission

36 

Transmission Oils 

LUKOIL TRANSMISSION TM-5 

aPi GL-5 

sae 75W-90 / 85W-90 / 80W-90 / 80W-140 / 

90 / 75W-140 

approved by: AVTOVAZ; ZF TE-ML 16B, 17B, 19B, 21A 

(SAE 80W-90, 85W-90); GAZ (SAE 85W-90) 

meets requirements: MB 235.0, MAN 342 M1, MIL-L2105D 

(SAE 80W-90) 

Volume (l): 1, 4, 18, 50, 216.5, 1000 


LUKOIL TRANSMISSION TM-5 are multigrade gear fluids manufactured using highly refined 

mineral and innovative synthetic base oils blended with an advanced additive package improving 

oil performance. Excellent for mechanical transmissions of all types (including hypoid) of passenger 

cars, commercial vehicles and other machinery operating under the most severe conditions where 

use of API GL-5 (TM-5) oils is recommended. 


› Provide good anti-scuffing, anti-oxidation and anti-corrosion properties during prolonged 

operation under heavy load and high temperature conditions; 

› SAE 75W-90 viscosity grade oil guarantees stable operation of the transmission at low 

temperatures, reducing fuel consumption; 

› Provides excellent engine performance through a wide temperature range; 

› Ensures long-life performance.


LUKOIL TRANSMISSION TM-4 

aPi GL-4 

sae 75W-80 / 75W-85 / 75W-90 / 80W-85 / 

80W-90 / 80W 

approved by: AVTOVAZ (SAE 75W-90); ZF TE-ML 02L; 

16K; MAN 341 Type Z4/E3 (SAE 75W-90); 

ZF TE-ML 02B, 16A, 17A, 19A (SAE 80W-90) 

meets requirements: ZF TE-ML 02A, 08, 16A, 17A, 19A (SAE 

75W-90); MB 235.1; MAN 341 Z2 (SAE 

80W-90) 

Volume (l): 1, 4, 18, 50, 216.5, 1000 


LUKOILTRANSMISSION TM-4 are gear fluids manufactured using highly refined mineral and 

innovative synthetic base oils blended with advanced additive package improving oil performance. 

Excellent for mechanical transmissions of all types of passenger cars, commercial vehicles and other 

machinery where the use of API GL-4 (TM-4) oils is recommended. 


› Provide good anti-wear, anti-scuffing, anti-corrosion and anti-oxidation properties; 


temperatures, reducing fuel consumption; 

› Ensures long-life performance. 

37

38 


LUKOIL TRANSMISSION TM-4/5 

aPi GL-4/5, MT-1 

sae 75W-90 

approved by: ZF TE-ML 02B, 05B, 07A, 08, 12B, 16F, 17B, 19C, MAN 3343 Type S, 

341 Type E3 

meets requirements: MB 235.8; ArvinMeritor 076N; MACK GO-J; MIL-L-2105D; 

MIL-PRF-2105E; SAE J2360; Scania STO 1:0 


LUKOILTRANSMISSION TM-4 is a fully synthetic, high efficiency driveline oil for gearboxes and axles 

of passenger cars and trucks where gear oils of an API GL-4 or API GL-5 (TDL- Total Drive Line) quality 

are recommended. 


› Provides high protection against wear, excellent oxidation and thermal stability, good compatibility 

with seals, increased drain interval; 


temperatures, reducing fuel consumption.


LUKOIL ATF 

approved by: ZF TE-ML 04D, 14A, 17C; Voith 55.6335; MAN 339 

Type Z-1, V-1 

meets requirements: GM Dexron IIIG; MB 236.1, 236.5; Allison C-4; 

Caterpillar СAT ТО-2 

Volume (l): 1, 4, 216.5 


LUKOIL ATF is a high technology universal automatic transmission fluid designed 

for both passenger cars & heavy duty applications. 

LUKOIL ATF possesses friction durability ensuring excellent clutch friction performance. 

It delivers high viscosity index performance over a wide temperature range, providing low temperature 

fluidity. LUKOIL ATF offers excellent corrosion and wear protection, good antifoam properties, thermal 

and oxidation stability. 

LUKOIL ATF is designed to meet and exceed the requirements of global original equipment manufactures. 

aPPlicaTiOn 

LUKOIL ATF is recommended for automatic transmission systems of both passenger cars and on- and 

off-highway trucks where Dexron IIIG products are specified. 

39

40 


LUKOIL ATF SYNTH MULTI 

approved by: Voith 55.6335; MAN 339 Type V-1, MB-Approval 236.6 

meets requirements: GM Dexron IIIH; Ford MERCON V; Volvo 97341; MAN 339 Type Z-1, 

Z-2; Allison C-4; ZF TE-ML 14A, 14B 

Volume (l): 1, 4, 216.5 


LUKOIL ATF SYNTH MULTI is a high quality, universal automatic transmission fluid designed for both 

passenger car and heavy duty applications. 

This fluid was designed for use in a wide range of passenger car applications in consideration of the 

tough demands of leading world original equipment manufactures and is suitable for use for both 

conventional and modern types of automatic transmission. LUKOIL ATF SYNTH MULTI can be used in 

vehicles from North America and Europe. 

LUKOIL ATF SYNTH MULTI is recommended for service fill in vehicles during warranty and post 

warranty periods. 

Prevents the likelihood of filling an inappropriate fluid into the automatic transmission. 

Demonstrates stable antifriction properties and smooth shifting without vibration. Possesses excellent 

thermal oxidative stability and maintains all properties at a high level, even in the event of extended 

drain intervals. Provides extended clutch life. Demonstrates improved lubrication and low temperature 

fluidity. Optimal viscosity ensures fast response by the electrohydraulic controlling system. 

LUKOIL ATF SYNTH MULTI possesses low viscosity dependence on temperature (high viscosity index) 

and excellent anti-ageing properties. This fluid has no negative impact on seal materials and does not 

form a foam. Improved anticorrosion properties reliably protect all equipment components. 

aPPlicaTiOn 

LUKOIL ATF SYNTH MULTI is recommended for step-type automatic transmissions of both passenger 

cars and trucks where Dexron IIIH products are specified as minimal requirements. It may also be used 

as a power steering fluid.


LUKOIL ATF SYNTH ASIA 

meets requirements: GM DEXRON® TASA, IID/E, IIIG, IIIH; Ford MERCON; 

JASO M315 Type 1A; Toyota Type T, T-II, T-III, T-IV, Type D-2; Nissan Matic 

Fluid C, D, J; Mitsubishi SP-II and SP-III; Subaru ATF; Isuzu BESCO ATF-II, 

ATF-III; Suzuki ATF Oil and ATF Oil Special; Mazda ATF D-III and ATF M-3; 

Daihatsu Alumix ATF Multi; Honda ATF Z-1 

Volume (l): 1, 4, 216.5 


LUKOIL ATF SYNTH ASIA is a high quality, universal automatic transmission fluid designed for 

passenger car applications. 

This fluid was designed for use in a wide range of Asian automatic transmissions, including ones fitted 

in European passenger cars, in consideration of the tough demands of leading original equipment 

manufactures of this region. 

LUKOIL ATF SYNTH ASIA is recommended for service fill in foreign vehicles during warranty and post 

warranty periods. 

Specially designed for Asian passenger cars requirements. Demonstrates stable antifriction properties 

and smooth shifting without vibration. Possesses excellent thermal oxidative stability and maintains 

all properties at a high level even in the event of extended drain intervals. Provides extended clutch 

life. Demonstrates improved lubrication and low temperature fluidity. Optimal viscosity ensures fast 

response by the electrohydraulic controlling system. 

LUKOIL ATF SYNTH ASIA possesses low viscosity dependence on temperature (high viscosity index), 

excellent anti-ageing properties. This fluid has no negative impact on seal materials and does not form 

a foam. Improved anticorrosion properties reliably protect all equipment components. 

aPPlicaTiOn 

LUKOIL ATF SYNTH ASIA is recommended for step-type automatic transmissions of passenger cars 

where JASO products are specified by the manufacturer. It may also be used as a power steering fluid. 

41

42 


LUKOIL ATF SYNTH HD 

approved by: ZF TE-ML 04D, 14B, 16L, 17C; Volvo 97341; Voith 55.6335, MAN 339 

Type V-1, Z2; MB-Approval 236.6 

meets requirements: GM Dexron IIIH; Ford MERCON, MERCON V; Allison C-4 

Volume (l): 1, 4, 216.5 


LUKOIL ATF SYNTH HD is a high quality, universal automatic transmission fluid designed for both 

heavy duty and passenger car applications. 

This fluid was designed in respect of tough demands of leading world original equipment manufactures 

and suitable for use at both of conventional and modern types of automatic transmission. LUKOIL ATF 

SYNTH HD can be used in vehicles from North America and Europe. 

LUKOIL ATF SYNTH HD is recommended for service filling in foreign and domestic vehicles during 

warranty and post warranty periods. 

Possesses significant improvements both in thermal and low temperature performance in comparison 

with conventional ATF. Provides consistent & smooth power shifting. Provides extended clutch life. 

Demonstrates improved lubrication and low temperature fluidity. Optimal viscosity ensures fast 

response of electrohydraulic controlling system. 

LUKOIL ATF SYNTH HD possesses low viscosity dependence on temperature (high viscosity index) 

and excellent anti-ageing properties. This fluid has no negative impact on seal materials and does not 

form a foam. Improved anticorrosion properties reliably protect all equipment components. 

aPPlicaTiOn 

LUKOIL ATF SYNTH HD is recommended for step-type automatic transmissions of both trucks and 

passenger cars where Dexron IIIH products are specified as minimal requirements. It may also be used 

as a power steering fluid.


LUKOIL GEYSER MM 

aPi CF / CF-2 

sae 10W / 30 / 50 

meets requirements: CAT TO-4; Allison C-4; ZF TE-ML 03; Komatsu; API CF, CF-2 


LUKOIL GEYSER MM are designed for heavy duty components of off-road vehicles, including axle 

and final drives, hydraulic systems, friction gear boxes, wet disc brakes, and diesel engines. 

LUKOIL GEYSER MM multifunctional oils contain special additives, which offer smooth operation of 

gearbox frictional components, excellent protection against wear, oxidation, corrosion, and foaming. 

aPPlicaTiOn 

LUKOIL GEYSER MM are used as: 

› - oils for axle and final drives, as well as transmission components of heavy duty applications, 

including off-road vehicles, where CAT TO-4 oils are required; 

› - oils for hydraulic systems; 

› - motor oils for diesel engines, where API CF-2 and CF fluids are recommended. 

43

44 


LUKOIL TSp-15k 

sae 90 

approved by: KAMAZ 

meets requirements: API GL-3 (ТМ-3) 


LUKOIL TSP-15K is gear oil manufactured using mineral base stocks and effective additives improving 

EP, antiwear, antioxidation properties, foam suppression and low temperature fluidity. 

Provides high stability during long-term operation. Reliable transmission component performance 

under high loads and within a wide temperature range. 

aPPlicaTiOn 

LUKOIL TSP-15K is designed for use as universal multigrade gear oil for KAMAZ gearboxes and axledrives. 

It is used for spur, bevel and spiral bevel gear sets in transmission systems of tractors, farm, and 

road construction machinery, requiring API GL-3 (TM-3) oils.

Industrial 

and Special

46 

Industrial and Special Hydraulic Oils 

LUKOIL GEYSER ZF 22, 32, 46, 68, 100 (zink-free) 

approved by: Denison HF0, HF1, HF2; Cincinnati Machine P-68 / P-69 / P-70; Bosch 

Rexroth 90220 

meets requirements: DIN 51524 Part 1, 2 (HLP); Eaton Vickers I-286-S, Vickers M-2950-S 


LUKOIL GEYSER ZF are outstanding hydraulic oils, with an extremely high level of purity, that provide 

improved anti-wear protection of industrial and automotive hydraulic systems. 

LUKOIL GEYSER ZF are blended with leading-edge zinc- and chlorine-free additives. Owing to use of 

modern technologies, they offer exceptional performance and are suitable for ultrafiltration systems 

with fine filters down to 1-5 micron. They ensure reliable and efficient operation of hydraulic systems, 

components, and tools under severe operating conditions. 

aPPlicaTiOn 

LUKOIL GEYSER ZF are used in hydraulic systems and gear drives in industrial, automotive, and 

marine equipment. 

PrOPerTy 

luKOil geyser 

ZF 22 

luKOil geyser 

ZF 32 

luKOil geyser 

ZF 46 

luKOil geyser 

ZF 64 

luKOil geyser 

ZF 100 

Kinematic viscosity 

at 40°С, mm2 /s 

19.8-24.2 28.8-35.2 41.4-50.6 61.2-74.8 90.0-110.0 

Viscosity index, min. 110 100 99 92 90 

Flash point, cOc, °С, min. 180 200 205 205 210 

Pour point, °С, max. -35 -30 -25 -25 -25 

cleanliness levels: 

gOsT 

isO 4406 

8-11 

13/10 – 16/13


LUKOIL GEYSER LT 22, 32, 46, 68, 100 

approved by: Denison HF-0, HF-1, HF-2; Bosch Rexroth 90220; Eaton Vickers I-286-S, 

M-2950-S 

meets requirements: DIN 51524 Part 3 (HVLP); Cincinnati Machine P-68 / P-69 / P-70 


LUKOIL GEYSER LT are multigrade hydraulic oils with excellent flow characteristics, especially at low 

temperatures. 

LUKOIL GEYSER LT are manufactured using high quality mineral oil and a multipurpose additive 

package. These oils offer a high level of purity, improved low temperature, antiwear, anticorrosion, 

and foam suppression properties. 

LUKOIL GEYSER LT are especially effective in hydraulic systems where only negligible viscosity 

changes are allowed within a wide range of operating temperatures. 

aPPlicaTiOn 

LUKOIL GEYSER LT are recommended for use as service fluid in hydraulic systems, including with 

fine filters down to 1-5 microns. These oils may be used in manufacturing, press, and other industrial 

equipment, as well as automotive hydraulic systems. 

PrOPerTy 

luKOil geyser 

lT 22 

luKOil geyser 

lT 32 

luKOil geyser 

lT 46 

luKOil geyser 

lT 68 

luKOil geyser 

lT 100 


at 40°С, mm2 /s 

19.8-24.2 28.8-35.2 41.4-50.6 61.2-74.8 90.0-110.0 

Viscosity index, min. 150 160 130 

Flash point, cOc, °С, min. 180 200 205 210 215 

Pour point, °С, max -51 -48 -42 -39 -36 


gOsT 

isO 4406 

8-11 

13/10 – 16/13 

47

48 


LUKOIL GEYSER ST 22, 32, 46, 68, 100 

approved by: Denison HF0, HF1, HF2; Cincinnati Machine P-68 / P-69 / P-70; Bosch 

Rexroth 90220; Danieli; PALFINGER; AVTOVAZ; ARBURG (ST 46); Severstal 

(ST 32) 

meets requirements: DIN 51524 Part 1, 2 (HLP); AFNOR NF E 48-603 (HM); Eaton Vickers 

I-286-S; JCMAS HK 


LUKOIL GEYSER ST are industrial hydraulic oils with a high level of refinement, excellent filtrability and 

air release performance. 

LUKOIL GEYSER ST are manufactured using mineral oil with a high viscosity index and an advanced 

additive package. These oils are designed for use in hydraulic equipment, including ultrafiltration 

systems with a purification degree of from 1 to 5 microns. They are suitable for severe operating 

conditions and protect equipment against wear and corrosion, offer excellent performance features, 

extend filter life and oil drain intervals, prevent system failures, and help to reduce operating costs by 

saving on downtime. 

LUKOIL GEYSER ST meet the requirements of such customers as Severstal OAO, AVTOVAZ OAO, etc. 

These oils are designed in close cooperation with leading world producers of additives and hydraulic 

equipment. 

aPPlicaTiOn 

LUKOIL GEYSER ST are used in industrial hydraulic systems and drives. 

PrOPerTy 

luKOil geyser 

sT 22 

luKOil geyser 

sT 32 

luKOil geyser 

sT 46 

luKOil geyser 

sT 68 

luKOil geyser 

sT 100 

isO/din HM/HLP HM/HLP HM/HLP HM/HLP HM/HLP 


at 40°С, mm2 /s 

19.8-24.2 28.8-35.2 41.4-50.6 61.2-74.8 90-110 

Viscosity index 110 110 100 100 100 

Flash point, cOc, °С, min 180 200 205 210 215 

Pour Point,°c, max. -36 -30 -27 -25 -21 


gOsT 

isO 4406 

8-11 

13/10 – 16/13


LUKOIL IGS 32, 46, 68 

approved by: Denison HF-0; HF-1; HF-2 

meets requirements: DIN 51524 Part 1, 2 (HL, HLP); AFNOR NF E 48-603 (HM); Eaton Vickers 

I-286-S; Cincinnati Machine P-68 / P-69 / P-70 


LUKOIL IGS are industrial hydraulic oils with highly refined mineral base stocks, ensuring high 

oxidative and thermal stability, anti-wear, anti-corrosion and demulsifying properties, as well as good 

filterability. 

LUKOIL IGS are designed in accordance with the requirements of such end users as OAO Volgskiy 

Trubny Zavod (a Russian giant pipe factory) and OAO AVTOVAZ. 

aPPlicaTiOn 

LUKOIL IGS are designed for high loaded hydraulic and circulation systems of industrial equipment. 

These oils offer excellent filterability that ensures reliable performance in modern hydraulic systems 

with filters down to 10 microns. 

LUKOIL IGS are compatible with all types of seal and paint coming into regular contact to mineral oils. 

LUKOIL IGS are not recommended for use with similar zinc-free oils. 

PrOPerTy luKOil igs 32 luKOil igs 46 luKOil igs 68 

isO/din HM/HLP HM/HLP HM/HLP 

Kinematic viscosity, isO 32 46 68 

Kinematic viscosity at 40 °c, mm2 /s 26.0 – 35.2 41.4 – 50.6 61.2 – 74.8 


Flash point, cOc, °c, min. 200 210 210 

Pour point, °c, max. -15 -15 -15 

ash, %, max. 0,2 0,2 0,2 

Zink, w. %, min. 0,04 0,04 0,04 

49

50 


LUKOIL IGP 18, 30, 38, 49, 72, 91,114 


LUKOIL IGP are industrial hydraulic oils manufactured from solvent refined base stocks blended with 

performance improving additives. 

LUKOIL IGP are designed as general purpose oils with additives. They outperform oils without 

additives in terms of wear, oxidation and rust protection and can replace such fluids in all types of 

equipment. LUKOIL IGP provide more extended protection of components in hydraulic systems at 

extreme pressure and operating temperatures, where oils with a high level of purity are not required. 

aPPlicaTiOn 

LUKOIL IGP constitute a wide range of hydraulic oil ISO grades. They are the oils most often 

recommended for hydraulic systems with vane, piston, and gear-type pumps. They are also suitable 

for heavy loaded piston and screw compressors, as well as being a multipurpose lubricant for 

hydraulic motors, bearings, shafts, etc. according to viscosity grades. 

PrOPerTy 

luKOil 

igP 18 

luKOil 

igP 30 

luKOil 

igP 38 

luKOil 

igP 49 

luKOil 

igP 72 

luKOil 

igP 91 

luKOil 

igP 114 

Kinematic viscosity at 

40 °c, mm2 /s 

24–30 39–50 55–65 76–85 110–125 148–165 186–205 

isO grade 22 46 - - - 150 - 

Viscosity index, min. 90 90 90 90 85 85 85 

Flash point, cOc, °С, min. 180 200 210 215 220 225 230 

Pour point, °С, min. -15 -15 -15 -15 -15 -15 -15 

acid number, mg KOh/1 g 

of oil, max. 

1 1 1 1 1 1 1 

ash, %, max. 0,2 0,2 0,2 0,2 0,2 0,2 0,2 

sulfur, w. %, max. 1 1 1 1 1 1 1 

Zink, w. %, min. 0,04 0,04 0,04 0,04 0,04 0,04 0,04


LUKOIL VMGZ 


LUKOIL VMGZ multigrade hydraulic oil is based on low viscosity base stocks with a low pour point, 

which are blended with an additive package ensuring high flow characteristics, oxidative stability, 

wear, corrosion, low temperature protection, and foam suppression. 

LUKOIL VMGZ help expand the geographic coverage of reliable fleet operations, ensure hydraulic 

system start-up without preheating and 24-hour operation of hydraulic equipment in northern and 

north-eastern regions without seasonal oil changes. This hydraulic oil also offers an extended drain 

interval – 3-4 times longer than conventional fluids. 

aPPlicaTiOn 

LUKOIL VMGZ is designed for year-round performance in the hydraulic drive and systems of 

construction, road, forestry, lifting, hauling, and other machinery that operates out of doors in the 

Far North, Siberia, and Far East regions, as well as being a winter hydraulic oil in temperate climate 

zones within the range from -58 up to +70 °С depending on the pumps used. 

PrOPerTy luKOil VmgZ 

isO grade 15 

Kinematic viscosity at 50 °С, mm2 /s, min. 10 

Kinematic viscosity at -40 °С, mm2 /s, max. 1500 

Viscosity index, min. 160 

Flash point, cOc, °С, min. 135 

Pour point, °С, max. -60 

ash, %, max. 0,2 

51

52 


LUKOIL MGE-10A 


LUKOIL MGE-10A is hydraulic oil on a base of carefully selected low viscosity mineral base oil with a 

high level of purity and ultra low pour point. This fluid contains an effective thickening agent with high 

mechanical stability, as well as antiwear additives, corrosion and oxidation inhibitors. 

Owing to the unique formula of LUKOIL MGE-10A, it offers reliable operation of hydraulic systems 

and equipment over a wide temperature range from -60…-65°С up to +70…75°С. 

PrOPerTy luKOil mge-10a 

Kinematic viscosity at 50 °c, mm2 /min. 10,2 

Kinematic viscosity at -50 °c, mm2 /max 1500 

Flash point, cOc, °c 110 

Pour point, °c -75 

acid number, mg KOh/1g of oil 0,7 

density at 20oc, kg/m 3 , max 860


LUKOIL MGE-46V 


LUKOIL MGE-46V is high quality, mineral hydraulic oil for hydrostatic drives, hydraulic systems and 

hydrostatic drives of farm, road construction, and other machinery operating under severe conditions 

at a pressure up to 35 MPa with short-term rises up to 42 MPa. The operating temperature range of this 

fluid is from -10 up to 80 °C. 

LUKOIL MGE-46V is manufactured on the basis of highly refined base stocks blended with leading 

edge antioxidation, antiwear, anticorrosion, and other additives. 

Provides long oil life when used in hydraulic systems, including with axial-piston pumps. Protects 

equipment against wear and corrosion. Meets the requirements on modern hydraulic systems with 

high accuracy actuators. Extends filter life. Excellent water separation (demulsifying ability) and foam 

suppression. Outstanding viscosity retention. High thermal and oxidative stability. Exceptional protection 

of metal surfaces against corrosion, especially during downtimes. Compatible with the main seal 

materials. Provides outstanding performance. Reduces operating costs by saving on downtime. 

PrOPerTy luKOil mge-46V 

isO/din grade HH/HL 

isO grade 

Kinematic viscosity, mm 

46 

2 /s 

at 40 °С 

41,4…50,6 

at 0 °С, max. 

1000 




cleanliness levels (isO 4406) 

8-11 

13/10…– 16/13 

53

54 


LUKOIL AU 


LUKOIL AU is a low temperature, highly refined apindle hydraulic mineral oil, manufactured from low 

sulphur oils by hydrogenation processes. It contains an oxidation inhibitor for improving performance 

features. 

aPPlicaTiOn 

LUKOIL AU is used as a hydraulic fluid in hydraulic systems, as well as for lubricating machine tools 

and equipment operated under high speed and light loads, including spindle blocks with plain and 

antifriction bearings, spinning spindles, twisters, thrust bearings, sewing, knitting, cotton machines, 

toppers and knitters. It is suitable for needle oiling in hosiery equipment. 

LUKOIL AU is also used as a base for special greases. 

PrOPerTy luKOil au 

Kinematic viscosity at 40 °С, mm2 /s 16-22 

Kinematic viscosity at -40 °С, mm2 /s, max. 20 000 



colour, cnT units, max. 2,5

Industrial and Special Compressor Oils 

LUKOIL STABIO 46, 68, 100, 150, 220 

meets requirements: DIN 51506 VDL; ISO 6743 


LUKOIL STABIO series oils are high quality, mineral compressor oils of viscosity grades including ISO 

46, 68, 100, 150, and 220. 

LUKOIL STABIO series oils are manufactured on the basis of high quality, solvent refined base stocks 

and a highly effective additive package, ensure good protection against oxidation, wear and 

corrosion, reduces sludge and deposits in compressor discharge lines. 

Use of LUKOIL STABIO allows a real reduction in the operating costs of a compressed air production 

facility by optimising compressor efficiency. 

aPPlicaTiOn 

LUKOIL STABIO are designed to meet the latest requirements on lubricants for modern oil-filled high 

power air and/or natural gases compressors, as well as circulation systems. 

PrOPerTy 

luKOil sTabiO 

46 

luKOil sTabiO 

68 

luKOil sTabiO 

100 

luKOil sTabiO 

150 

luKOil sTabiO 

220 

isO Viscosity grade 46 68 100 150 220 


at 40°С, mm2 /s 

at 100°С, mm2 46 

67,4 

100 

150 

220 

/s 

6,7 

8,5 

11,4 

14,8 

18,9 

Flash point, cOc, °С 225 235 240 258 260 

Pour point, °С -24…-26 

Four ball scar, mm 0,30…0,33 

55

56 


LUKOIL STABIO SYNTHETIC 46 

PrOPerTy luKOil sTabiO synTheTic 46 

isO Viscosity grade 46 


at 40°С, mm 2 /s 

at 100°С, mm 2 /s 

meets requirements: DIN 51506 VDL; ISO 6743-3A; SAE M 1003-2 


LUKOIL STABIO SYNTHETIC 46 are high quality compressor oils based on synthetic technology base 

oils with very high-performance additives and are produced in viscosity grades ISO VG 46. The 

lubricant demonstrates excellent performance at extremely low temperatures. As a result of balanced 

viscosity- temperature behaviour, the lubricant provides constant pressure into the hydraulic circuit. 

LUKOIL STABIO SYNTHETIC 46 ensures easy start-up at low temperatures. 

LUKOIL STABIO SYNTHETIC 46 ensures excellent protection against oxidation, wear and corrosion 

and reduction of sludge and deposit formation in compressor discharge lines. 

Use of LUKOIL STABIO SYNTHETIC 46 allows a real reduction in the operating costs of a compressed 

air production facility by optimising compressor efficiency. 

aPPlicaTiOn 

LUKOIL STABIO SYNTHETIC 46 is designed to meet the latest requirements on lubricants for modern 

oil-filled high power air and/or natural gases screw compressors, as well as circulating lubrication 

systems operating at high temperatures. 

46 

7,71 

Viscosity index 135 

Flash point, cOc, °С 244 

Pour Point, °c -39 

Four ball scar, mm < 0,33 

rbOT, minutes 

Foam, 

1800 

sequence i, ml 

0/0 

sequence ii, ml 

0/0 

sequence iii, ml 

0/0


LUKOIL K3-10N, K2-24, KS-19p 

meets requirements: ISO VG 220 (KS-19P) 


LUKOIL K3-10N, K2-24, KS-19p are high quality, mineral compressor oils designed for oil-filled 

piston compressors. LUKOIL K3-10N, K2-24, KS-19p are manufactured on the basis of high quality, 

solvent refined base stocks, which ensure good protection against oxidation. A highly effective 

additive package reduces sludge and deposits in compressor discharge lines and offers improved 

compressor oil performance. 

aPPlicaTiOn 

LUKOIL K3-10N is designed for piston compressors with a discharge temperature of up to 200°С, 

and rotary compressors, as well as for railway compressors and mobile compressor stations operated 

in the northern regions. 

LUKOIL K2-24 is used in multistage high-pressure piston compressors with a discharge temperature of 

up to 180°С, including compressors of air separation plants. 

LUKOIL KS-19p is designed for moderate and high pressure piston and rotary compressors. This oil 

is recommended for single- and multistage compressors for air and/or other gases not soluble in 

oil. In some cases, LUKOIL KS-19p is also used instead of MS-20 oils (subject to approval by the 

equipment manufacturer). It is recommended for use instead of LUKOIL K-19 and KS-19 as agreed 

with VNIIKompressormash. 

PrOPerTy luKOil K3-10n luKOil K2-24 luKOil Ks-19p 

Kinematic viscosity at 40 °С, mm 2 /s 9–13 21–25 18-24 


Flash point, cOc, °С, min. 205 270 260 

Pour point, °С, max. -30 -10 -15 

acid number, mg KOh/1 g of oil, min. 0,2 0,35 0,03 

base oil ash, %, max. 0,005 0,06 0,005 

coking, %, max. 0,2 0,5 0,45 

57

58 

Industrial and Special Reductor Oils 

LUKOIL STEELO 68, 100, 150, 220, 320, 460, 680 

approved by: Flender revision 13 

meets requirements: AGMA 9005-EO2 (EP); DIN 51517 Part 3; SEB 181226; AIST 224; David 

Brown 


LUKOIL STEELO are high quality oils for heavy loaded industrial gearboxes. 

LUKOIL STEELO offer excellent performance owing to the carefully selected, highly refined base 

stocks with a high viscosity index and a special additive package containing sulphur and phosphor. 

The optimal ratio of EP properties and antifriction capacities allow LUKOIL STEELO oils to be used 

effectively in various components and units of industrial equipment. 

aPPlicaTiOn 

LUKOIL STEELO are recommended for industrial gearboxes and units with steel gears where EP oils 

are required. The applications include bearings, wheel, warm and screw gears in different industrial 

equipment, as well as oil circulation and mist lubricating systems. 

PrOPerTy 

luKOil 

sTeelO 68 

luKOil 

sTeelO 

100 

luKOil 

sTeelO 

150 

luKOil 

sTeelO 

220 

luKOil 

sTeelO 

320 

luKOil 

sTeelO 

460 

luKOil 

sTeelO 

680 


at 40 °С, mm2 /s 

61.2-74.8 90-110 135-150 198-242 311-334 414-506 612-748 

Viscosity index, min. 90 90 90 90 90 90 90 

Flash point, cOc, °С, min. 210 220 220 220 230 230 240 

Pour point, °С, max. -15 -15 -15 -15 -15 -15 -15


LUKOIL STEELO RS 100, 220, 460 


LUKOIL STEELO RS are high quality oils for heavy loaded industrial gearboxes and rolling-mills. 

LUKOIL STEELO RS offer excellent performance owing to the carefully selected, highly refined base 

stocks with a high viscosity index and special additive package containing sulphur and phosphorus. 

The optimal ratio of EP, antioxidantion, antifriction and demulsifying properties allow LUKOIL STEELO 

RS oils to be used effectively in various components and units of industrial equipment. They have a 

high load bearing capacity and meet the current mill rate. 

aPPlicaTiOn 

LUKOIL STEELO RS are recommended for industrial gearboxes and units with steel gears where EP oils 



PrOPerTy sTeelO rs 100 sTeelO rs 220 sTeelO rs 460 

Kinematic viscosity at 40 °С, mm 2 /s 90-110 198-242 414-506 

Viscosity index 92 92 92 

Flash point, cOc, °С 234 260 280 


Tribological behavior, four-ball e.P test: 

load wear index, Н (kg sec) 

weld point, 1 hour, 196 Н, mm 

519-588 (53-60) 

0,28-0,32 

59

60 


LUKOIL STEELO LT 100, 150, 220 

meets requirements: DIN 51517 Part 3 (CLP); Flender revision 9; AIST 224; AGMA EO2 (EP); 

SEB 181226 


LUKOIL STEELO LT are high quality oils with improved low temperature performance for heavy loaded 

industrial gearboxes. 

LUKOIL STEELO LT offer excellent performance owing to the carefully selected, highly refined base 

stocks with a high viscosity index and special additive package containing sulphur and phosphor. 

The optimal ratio of EP properties and antifriction capacities allow LUKOIL STEELO LT oils to be used 

effectively in various components and units of industrial equipment. 

aPPlicaTiOn 

LUKOIL STEELO LT are recommended for industrial gearboxes and units with steel gears, where EP oils 



PrOPerTy sTeelO lT 100 sTeelO lT 150 sTeelO lT 220 

Kinematic viscosity at 40 °С, mm 2 /s 101,4 142,9 213,5 



Pour point, °С, max. -30 -28 -26


LUKOIL I-T-D 32, 68, 100, 150, 220, 320, 460, 680 


LUKOIL I-T-D are high quality oils with an efficient additive package for high loaded gearboxes and 

other industrial equipment. These oils are manufactured using high quality mineral base oils and an 

effective additive package improving their lubricating, antioxidation, anticorrosion, antiwear and 

extreme pressure properties. 

LUKOIL I-T-D offer outstanding performance similar to Mobilgear by Mobil, Spartan EP by ESSO, 

Alpha SP by Castrol, Omala oils by Shell. LUKOIL I-T-D are approved by VNIIReductor and 

manufactured under licence from SvNIIINP OAO. 

aPPlicaTiOn 

LUKOIL I-T-D are recommended for high loaded friction units, including automatic die presses, 

gearboxes, and other industrial equipment, where high loads do not allow oils without additives 

improving lubrication to be used. 

PrOPerTy 

luKOil 

i-T-d 32 

luKOil 

i-T-d 68 

luKOil 

i-T-d 100 

luKOil 

i-T-d 150 

luKOil 

i-T-d 220 

luKOil 

i-T-d 460 

luKOil 

i-T-d 680 


at 40 °С, mm2 /s 

28.8-35.2 61.2-74.8 90.0-110.0 135,0-150 198,0-242 414,0-506 612,0-748 

load wear index, n (kgs), 

min. 

392 (40) 392 (40) 441 (45) 490 (50) 490 (50) 540 (55) 540 (55) 

Wear scar, diameter, mm, 

max. 

0,45 0,45 0,45 0,45 0,45 0,45 0,45 

Pour point, °С, max. -18 -18 -18 -15 -18 -15 -5 

61

62 

Industrial and Special Slide Way Oils 

LUKOIL ADVANTO 150, 220 

meets requirements: DIN 51517 Part3 (CLP); Voith VN 108; SKF Emcor (Roller test); FAG FE8, 

FAG Step 4, FAG PMO 


LUKOIL ADVANTO are special circulation oils for high performance paper machines working at 

extreme temperatures and speeds, when steam under high pressure is applied. The oils are produced 

from selected base oils and a modern additive package that improves the oils’ performance. 

They have high antiwear and EP properties. Provide for long and safe operation of machine parts 

working under high loads, temperatures and speeds in the presence of water and steam. Excellent 

thermo and oxidation stability. Good filterability. Protect against corrosion and rust. Quick and 

powerful water separation. Reduced maintenance costs resulting from increased drain intervals and 

equipment life. 

aPPlicaTiOn 

LUKOIL ADVANTO 150 and 220 are recommended for use in lubricating roller and plain bearings as 

well as gears of paper machines working at high temperatures, loads and speeds in the presence of 

water and steam. 

PrOPerTy luKOil adVanTO 150 luKOil adVanTO 220 

isO Viscosity grade 150 220 

Kinematic viscosity at 40 °С, mm 2 /s 158,6 222,4 

Viscosity index 102 103 

Flash Point cOc, °c 230 235 

Pour Point, °c -12 -12 

cu corrosion, 3 h, 100 °c 1b 1b 

Water separability at 82 °c, minutes 6 3 

Wear scar diameter, 1h, 392 n, 20 °c, mm 0,34 0,36

Industrial and Special Slide Way Oils 

LUKOIL SLIDO 32, 68, 150, 220 

approved by: Cincinnati Machine P-47 / P-50 / P-53 

meet requirements: BIJUR PT 37-1 


LUKOIL SLIDO are high quality industrial oils for machine slideways and sliding tables of both linear 

and rotational types. The outstanding performance of LUKOIL SLIDO lubricants ensures smooth, 

continuous motion of workpieces. They are highly effective in centralised lubrication systems, feeding 

both hydraulic equipment and slideways. 

LUKOIL SLIDO 32 and LUKOIL SLIDO 68 lubricants are designed for hydraulic systems and 

slideways, including program-controlled precision machinery. LUKOIL SLIDO 150 and LUKOIL SLIDO 

220 lubricants are designed only for heavy loaded tables and some types of vertical slide. 

LUKOIL SLIDO are formulated using refined mineral base stock with a high viscosity index and a 

selected additive package. They offer a low friction factor, high adhesion to metal surfaces, good 

filterability, exceptional anticorrosion protection and anti-foam properties. 

LUKOIL SLIDO are designed to meet the latest requirements on lubricants for precision and high-output 

machinery. 

aPPlicaTiOn 

LUKOIL SLIDO are recommended for machinery slideways, hydraulic systems, and drive gears. 

PrOPerTy luKOil slidO 32 luKOil slidO 68 luKOil slidO 150 luKOil slidO 220 

Kinematic viscosity at 40 °С, mm 2 /s 28.8-35.2 61.2-74.8 135-165 198-242 

Viscosity index, min. 100 95 90 88 

Flash point, cOc, °С, min. 200 210 220 220 

Pour point, °С, max. -25 -20 -15 -15 

63

64 

Industrial and Special Turbine Oils 

LUKOIL TORNADO T 32, 46 

PrOPerTy luKOil TOrnadO T 32 luKOil TOrnadO T 46 

isO Viscosity grade 32 46 


at 40°С, mm 2 /s 

at 100°С, mm 2 /s 

approved: Siemens TLV 901305 & 90104; MAN Turbo 

meets requirements: DIN 51515 Part 1 (L-TD) & 2(L-TG); ISO 6743/5 (L-TSA, L-TGA, L-TGB), 

ISO 8068 type AR; BS 489 


LUKOIL TORNADO T is a family of high quality turbine oils based on synthetic technology base oils 

with a very high-performance ashless additive package. The lubricants are produced in viscosity 

grades ISO VG 32 & 46. The lubricant was designed and approved with the participation of leading 

world turbine manufacturers. 

LUKOIL TORNADO T provide a high level of antioxidant, antiwear and anticorrosion protection, 

minimise sludge formation and are compatible with seals. The lubricants are adjusted to modern 

turbine installations. 

Use of LUKOIL TORNADO T allows a real reduction in the operating costs for electricity production 

and increase equipment life. 

aPPlicaTiOn 

LUKOIL TORNADO T are designed to meet the latest requirements on lubricants for modern steam and 

gas turbines, including those coupled with gearboxes. 


Flash point, cOc, °С 235 257 

Pour Point, °c -12 -10 

rbOT, minutes 

Foaming (tendency/stability), 

1380 1300 

sequence i, ml 

40/0 

10/0 

sequence ii, ml 

15/0 

15/0 

sequence iii, ml 

50/0 

20/0 

air release, min 

Water separability at 54 °c 

1,6 2,2 

time for separation, min 

8 

6 

oil – water – emulsion, ml 

42 – 38 – 0 

42 – 38 – 0 

density at 20 °c, kg/m3 832 844 

29,85 

5,75 

49,28 

7,84


LUKOIL TP-22s Grade 1 and 2 


LUKOIL Tp-22S industrial turbine oils are manufactured using high quality, mineral base oils and 

additives that increase antioxidation, anticorrosion, foam suppression, and demulsifying properties. 

LUKOIL Tp-22S are recommended for all types of turbine, including gas, steam, and hydroelectric, 

marine turbines and drive systems. They do not contain extreme pressure additives (EP). These oils are 

designed for the most severe operating conditions and applications requiring high anticorrosion and 

antioxidation properties. They are also used as compressor oils in the application where manufacturers 

recommend R&O fluids. Moreover, LUKOIL Tp-22S are recommended for use as a service fluid in the 

control system of turbine units and hydraulic fluids in industrial equipment. 

LUKOIL Tp-22S are manufactured in two grades: Grade 1 and Grade 2. Grade 1 ensures more 

thermal and oxidative stability than Grade 2. 

aPPlicaTiOn 

LUKOIL TP-22S is used in different turbines, including: 

› Gas, steam, hydraulic turbines for power generation in high-power plants 

› Gas turbines in combined cycle power plants 

› Systems with hydroelectric turbines 

› Drive systems of gas or steam turbines 

PrOPerTy luKOil TP-22s grade 1 luKOil TP-22s grade 2 

Kinematic viscosity at 40/50 °С, mm 2 /s 31.6/21.4 28.8–35.2/20-23 

isO grade 32 32 


Flash point, cOc, °С 208 207 

Pour point, °С -15 -15 

sulfur in base oil, w.% 0,39 0,45 

Foam tendency, demulsification period, minutes 1,5 2 

acid number, mg KOh/1g of oil 0,056 0,063 

colour, cnT units 0,5 2 

density at 20 °c, kg/m 3 832 844 

65

66 


LUKOIL TP-30 


LUKOIL Tp-30 is a turbine oil manufactured using mineral base oils that have passed through two stages 

of hydrotreatment and additives that increase antioxidation, anticorrosion, and demulsifying properties. 

LUKOIL Tp-30 is recommended for all types of turbine, including gas, steam, and hydroelectric, 

marine turbines and drive systems. It does not contain extreme pressure additives (EP). LUKOIL Tp- 

30 is designed for the most severe operating conditions and applications requiring high anticorrosion 

and antioxidation properties. It is also used as a compressor oil in applications where manufacturers 

recommend R&O fluids. 

aPPlicaTiOn 

LUKOIL Tp-30 is used in different turbines, including: 

› Gas, steam, hydraulic turbines for power generation in high-power plants 

› Gas turbines in combined cycle power plants 

› Systems with hydroelectric turbines 

› Drive systems of gas or steam turbines 

PrOPerTy luKOil TP-30 

Kinematic viscosity at 40/50 °С, mm 2 /s 41.4–50.6 

isO grade 46 




sulfur in base oil, w.%, max. 0,5 

Foam tendency, demulsification period, minutes, max. 3 

acid number, mg KOh/1g of oil 0.04–0.07 

colour, cnT units, max. 1,5 

density at 20 °c, kg/m 3 832

Industrial and Special Marine Oils 

LUKOIL NAVIGO TPEO 12/40, 15/40, 20/40, 30/40, 

40/40, 50/40, 55/40 

approved: Wartsila 


Oil series LUKOIL NAVIGO TPEO are extra high performance marine diesel engine oils. 

They are especially designed for lubricating medium speed trunk diesel engines. 

Provide excellent neutralising capability, excellent thermal stability, water resistance. Have anti-wear, 

detergent and dispersant properties. 

aPPlicaTiOn 

LUKOIL NAVIGO TPEO satisfies the requirements and recommendations of the major engine 

manufacturers. LUKOIL NAVIGO TPEO applications are in the turbocharged main and auxiliary 

engines of all ratings that run on gas oil or heavy fuel oil with a high sulphur content. 

PrOPerTy 

luKOil 

naVigO 

TPeO 

12/40 

luKOil 

naVigO 

TPeO 

15/40 

luKOil 

naVigO 

TPeO 

20/40 

luKOil 

naVigO 

TPeO 

30/40 

luKOil 

naVigO 

TPeO 

40/40 

luKOil 

naVigO 

TPeO 

50/40 

luKOil 

naVigO 

TPeO 

55/40 

Pour point, °c, 

asTm d 97 

-12 -12 -12 -12 -12 -12 -12 

Flash point, °c, 

asTm d 92 

230 230 230 230 230 230 230 

Viscosity at 100 °c, cst, 

asTm d 445 

13,5-15,0 13,5-15,0 13,5-15,0 13,5-15,0 13,5-15,0 13,5-15,0 13,5-15,0 

sae 

Tbn, 

40 40 40 40 40 40 40 

mg KOh/g, 

asTm d 2896 

12 15 20 30 40 50 55 

67

68 

Industrial and Special Tractor Oils 

LUKOIL VERSO 

sae 10W-30 

approved by: Massey Ferguson M1145 

meets requirements: API GL-4; Allison C4; Caterpillar TO-2; Massey Ferguson M1135, M1143; 

John Deere JDM J20C; Ford M2C 134D, M2C 86B; CNH MAT 3525; 

New Holland NH 410B, NH 420A; Fiat AF 87; Denison UTTO HF-0, 

HF-1, HF-2 (Pump only); Sperry Vickers/Eaton I-280-S & M2950S (Mobile 

hydraulic systems – Brochure 694); Sauer Sunstrand/Danfoss Hydro Static 

Trans Fluid 


LUKOIL VERSO – is a high-performance universal transmission oil (UTTO) manufactured using highly 

refined mineral, blended with anadvanced additive package improving oil performance. 

Provides high extreme pressure properties and protection against wear. Has excellent oxidative 

and thermal stability. Extends operation of transmission systems under high loads and within a wide 

temperature range. Stabilises job and gradual engagement of friction elements. 

aPPlicaTiOn 

LUKOIL VERSO is recommended for use in transmissions, hydraulic and oil-immersed brakes and other 

ancillary systems fitted to tractors and off-road equipment operated in a wide temperature interval. 

PrOPerTy luKOil VersO 10W-30 

density at 15 °С, kg/m 3 870 

Kinematic viscosity at 100 °С, mm 2 /s 10,3 


dynamic viscosity at -35 °c, Pa*s 46 

Tbn, mg КОН/g 8,2 

Flash point, °С 225 

Pour Point, °С -48

Industrial and Special Tractor Oils 

LUKOIL VERSO MOTOR 

sae 15W-40 

approved: Massey Ferguson M1145 

meets requirements: ZF TE-ML 06B, 07B 

super Tractor Oil universal (sTOu) specification: 

Massey Ferguson M1144; John Deere J27; Ford M2C 159B/C; 

New Holland NH 82009203, NH 024C 

universal Tractor Transmission Oil (uTTO) specification: 

Fiat AF 87; Allison C4; API GL-4; ZF TE-ML 07D 

hydraulic systems: 

Sperry Vickers/Eaton I-280-S & M2950S; Sauer Sunstrand/Danfoss Hydro 

Static Trans Fluid; Afnor NFE68603E 

engines: 

API CG-4, CF-4, CF, CE/SF, CD/SE; MB 227.1, 228.1; ACEA E3-02; 

CCMС D4 


LUKOIL VERSO MOTOR – is a high-performance super tractor oil (STOU) manufactured using highly 

refined mineral and innovative synthetic base oils blended with an advanced additive package 

improving oil performance. LUKOIL VERSO MOTOR is recommended for year-round using in high 

performance engines, gearboxes and in hydraulic equipment. 

Provides high extreme pressure properties and protection against wear. 

Extends operation of transmission systems under high loads and within a wide temperature range. Has 

excellent oxidative and thermal stability. Stabilises job and gradual engagement of friction elements. 

aPPlicaTiOn 

LUKOIL VERSO MOTOR is recommended for use as an engine and transmission oil, in driving axles, 

“wet” brakes and hydraulic equipment requiring oil class ”Super Tractor Oil Universal” (STOU). 

The product can also be used in the class “Universal Tractor Transmission Oil” (UTTO), but for this 

application we recommend a universal transmission-hydraulic oil LUKOIL VERSO SAE 10W-30 as 

meeting these requirements. 

PrOPerTy luKOil VersO mOTOr 15W-40 

density at 15°c, kg/m3 871 




dynamic viscosity at -20 °С, ccs, mPa*s 4740 

dynamic viscosity at -25 °С, mrV, mPa*s 16400 

Tbn, mg KOh/g 9,8 

Flash point, °С 205 

Pour Point, °С -37 

69

70 

Industrial and Special Transformer Oils 

LUKOIL VG 

meets requirements: IEC 296 Class II A 


LUKOIL VG is a high quality, electrical insulating oil manufactured of mineral stocks using hydrocatalytic 

processes. It contains a highly efficient oxidation inhibitor. 

LUKOIL VG offers good dielectric properties and high oxidative stability. 

aPPlicaTiOn 

LUKOIL VG is designed for use in transformers, converters and rectifiers, as well as power distribution 

facilities under a voltage of up to 1150 kV inclusive. It is widely used as an insulating oil in distribution 

facilities, transformers, converters, inductors and capacitors. 

Kinematic viscosity, mm 2 /s, min. 

at 50 °С, min. 

at 30 °С, max. 

PrOPerTy luKOil Vg 

9,0 

1200 

dielectric loss tangent at 90 °С, %, max. 0,5 



acid number, mg KOh/1 g of oil, min. 0,01 

Oxidative stability, iec method, induction period, hours, min. 120

Industrial and Special Industrial Oils 

LUKOIL SUPPORTO 5, 7, 10 


LUKOIL SUPPORTO – are manufactured using high quality mineral oil and a highly efficient additive 

package. This series has been developed mainly as an industrial multi-purpose oil offering improved 

low temperature, antiwear, anticorrosion, and foam suppression properties. 

aPPlicaTiOn 

LUKOIL SUPPORTO are designed for lubricating machine tools and equipment operated at high speed 

and under light loads, including spindle blocks with plain and antifriction bearings, spinning spindles, 

twisters, thrust bearings, sewing, knitting, cotton machines, toppers and knitters. 

PrOPerTy luKOil suPPOrTO 5 luKOil suPPOrTO 7 luKOil suPPOrTO 10 

Viscosity at 40 °С, mm2 /s 5,03 6,8 9,9 

isO Viscosity grade 5 7 10 

Flash Point (cOc), °c 130 143 155 

Pour Point, °c -44 -44 -44 

Tan, mg КОН/g 0,045 0,06 0,051 

4 ball Wear scar diameter, 20 °С, 20 kg, 1 h, mm 0,29 0,3 0,3 

71

72 


LUKOIL INTEGO 220, 460 

meets requirements: Morgoil bearings; Danieli ESS bearings; EZTM (Electrostal Heavy 

Engineering Work) 


LUKOIL INTEGO is a family of high quality circulation lubricants for Morgoil type bearings of rolling 

mills. LUKOIL INTEGO are formulated using deeply refined mineral base oils with a high viscosity 

index and a high performance ashless additive package improving antioxidant, anticorrosion, 

demulsifying, antifoam behaviour, as well as increasing the EP properties of the lubricants. The 

lubricants demonstrate excellent oxidation and thermal stability, allowing it to be used with extended 

drain intervals. Improved demulsibility of LUKOIL INTEGO allows it to be used at high and low 

operating temperatures under wet conditions. An ashless additive package ensuring high hydrolytic 

stability and protects equipment against corrosion. 

The lubricants are designed with the participation of leading world engineering institutes. 

The lubricants are adapted to severe operating conditions. 

aPPlicaTiOn 

LUKOIL INTEGO (ISO VG 220 & 460) are recommended for use in high loaded hydrostatodynamic 

oil film bearings like Morgoil bearings or Danieli ESS bearings. LUKOIL INTEGO 460 is 

recommended for circulating lubrication of industrial gearboxes and bearings. 

PrOPerTy luKOil inTegO 220 luKOil inTegO 460 

Kinematic viscosity at 100°С, mm 2 /s 198 - 242 414 - 506 

Viscosity index > 95 > 95 

Flash Point, cOc, °c > 230 > 250 

Pour Point,°c < - 10 < - 6 

cu corrosion, rating 1a 1a


LUKOIL I-20, I-40, I-50 


LUKOIL I are industrial oils manufactured using solvent refined mineral base stocks. 

LUKOIL I-20 demonstrates excellent results when used as a multipurpose oil in industrial hydraulic 

equipment, construction, road construction, and other outdoor applications. 

aPPlicaTiOn 

LUKOIL I are designed for use as hydraulic fluids in hydraulic systems of industrial machinery, 

automated lines, presses. They are also used in gearboxes, slideways, and other equipment under 

light or moderate loads where special lubricants are not required. 

PrOPerTy luKOil i-20 luKOil i-40 luKOil i-50 

Kinematic viscosity at 40 °С, mm2 /s 29–35 61–75 90-110 


Flash point, cOc, °С, min. 200 220 225 


acid number, mg KOh/1 g of oil, max. 0,03 0,05 0,05 

ash, %, max. 0,005 0,005 0,005 

73

74 


LUKOIL ASSISTO T 16, T 26 


LUKOIL ASSISTO T are special oils used as a service fluid in metal heat treating processes where 

high performance lubricants are required. The oils are produced using selected base oils with a high 

efficiency additive package that improves anticorrosion, antioxidation and detergent properties. 

They increase metal hardness and provide the requisite steel structure and surface cleanliness. 

Ensure deep high quality quenching of large parts. Demonstrate long service life of the oils with a 

high performance level. Procure an optimal cooling rate. Provide high anticorrosion and anti foam 

properties. Demonstrate excellent thermo and oxidation stability. Ensure low volatility values. No 

hazardous substances are emitted on heat treatment. 

aPPlicaTiOn 

LUKOIL ASSISTO T 16 are recommended for use in metal heat treatment processes at working 

temperatures of from 20 °C to 50 °C, LUKOIL ASSISTO T 26 – from 70 °C to 110 °C. 

PrOPerTy luKOil assisTO T 16 luKOil assisTO T 26 

Kinematic viscosity at 40 °С, mm 2 /s 21,1 38,8 


Flash Point, °c 

cOc 

Pm 

Oxidation stability 

Oil weight losses, % 

Flash Point (Pm) change, °c 

cockeability, % 0,05 0,06 

sulphated ash, % 0,03 0,04 

210 

202 

0,36 

+4 

220 

206 

0,74 

+2

Industrial and Special Gas Engine Oils 

LUKOIL EFFORSE 4004 

sae 40 


LUKOIL EFFORSE 4004 is a low ash mineral gas engine oil. Designed for high output naturally 

aspirated and turbocharged gas engines in stationary applications running on natural gas, associated 

petroleum gas, etc. 

LUKOIL EFFORSE 4004 is formulated from high quality mineral base stocks and superior performance 

additive technology. 

LUKOIL EFFORSE 4004 is specially developed in accordance with the requirements of the leading 

world gas engine manufacturers, such as GE Jenbacher (Type 4, 6, 2 and 3 engines), Perkins, Rolls 

Royce, Caterpillar, Deutz and others. 

Gas engines running under severe conditions promote oxidation and nitration of the lubricant. LUKOIL 

EFFORSE 4004 contains advanced additive technologies designed to deliver complete protection 

against harmful deposit formation, engine wear, scuffing, oil oxidation and nitration in high output 

natural gas engines. This highly robust lubricant offers a very long service period and maximises 

engine life. 

aPPlicaTiOn 

LUKOIL EFFORSE 4004 is recommended for naturally aspirated and turbocharged gas engines in 

stationary applications running on sweet or dry natural gas, associated petroleum gas, etc. 

PrOPerTy luKOil eFFOrse 4004 

density, 15 °c, kg/l 0,888 

Kinematic viscosity at 40°С, mm 2 /s 148,4 

Kinematic viscosity at 100°С, mm 2 /s 14,3 


Pour Point,°c -15 

Flash Point, cOc, °c 258 

Tbn, mg KOh/g 5,56 

sulphated ash, % wt 0,49 

75

76 

Since 2007 LUKOIL Lubricants has been a member of ATIEL (Technical 

Association of the European LubricantsIndustry) and CIMAC (International 

Council on Combustion Engines). Membership in international associations promotes 

cooperation with equipment manufacturers worldwide and the timely receipt 

of information about the development of technical requirements and specifications. 

The production plants have been certified to ISO 9001, ISO 14001, and OHSAS 

18001 standards, which guarantees its customers sustained high product quality. 

LUKOIL performs quality control throughout the lubricant manufacturing process, 

each batch is tested for compliance with all the requirements prior to shipping 

and is provided with a quality certificate, certificate of compliance and health certificate. 

The company guarantees lubricants compliance with the API and ACEA 

standards. 

REACH 

In December 2008 LUKOIL has successfully completed pre-registration of chemicals 

in accordance with the requirements of the Regulation on Registration, 

Evaluation, Authorization and Restriction of Chemicals (REACH) adopted 

by the European Parliament and the Council. As part of the procedure, a unique 

reference number was assigned to each chemical coming from a particular manufacturer 

or importer. Manufacturers outside of the European Union had to appoint 

a special representative authorized to act as the importer of the goods producedby 

the given manufacturer. 

“LUKOIL Neftochim Bourgas” AD (responsible for products manufactured at 

the Company’s refineries, petrochemical enterprises and gas processing enterprises) 

and LLK LUBRICANTS ROMANIA (responsible for products manufactured 

by lubricant departments of the Company’s refineries) have been assigned 

as OAO LUKOIL’s special EU representatives. 

The total amount of the pre-registered chemicals manufactured by the Russian 

and foreign refineries, petrochemical enterprises and gas processing enterprises 

of OAO LUKOIL came to over 400 items.

OOO «llK international» lubricants company, 

6 malaya yakimanka st., 119180 moscow, russia, 

Tel.: +7 (495) 627-40-20 

www.lukoil-masla.ru

lukoil genesis premium

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?