ALPINE

BOOTS
TECHNOLOGY
RACE
ADJUSTABLE SPOILER
The spoiler is fixed to the boot liner
by a Velcro strap and can be adjusted
individually. Higher spoiler for more
support, lower spoiler for lower calf
position, spoiler removed for less
forward lean.
HEEL & TOE PLATES
Replaceable sole plates that do not
affect power transfer to the ski.
H.I.P.E.
High Insulation PolyEthylene: maximum
warmth insulation through the 3-layer
principle (mesh, aluminium coating,
polyethylene). The material also gives
you a more homogeneous fit.
VACU-PLAST
Perfect fitting at 80°C for the anatomy of
the foot for direct control impulses and
more rebound through greater elasticity.
Greater temperature stability and 15%
less weight.
HYBRID
HIKE / RIDE / LOCK MODE
HIKE MODE: maximum freedom of motion
for the cuff so you can walk easily.
RIDE MODE: the cuff is blocked at the
back, the flex at the front stays smooth –
for perfect turns in powder.
LOCK MODE: the cuff is blocked as on racing
boots for maximum performance on the piste.
ON/OFF PISTE MODE
The boot can be adapted according to the
respective snow conditions. Removed spoiler
for more forward lean (17°, X-Series 17°) and
hard piste conditions (On Piste Mode).
Lowered spoiler for less forward lean (14°,
X-Series removable spoiler with 12° forward
lean) for deep snow and soft piste conditions.
HEAT SYSTEM READY
Cuff and boot liner are prepared for
heating systems to be added. All you have
to do is thread in the cable of the heated
insole and connect the powerpack to the
cuff. Fischer recommends:
GEL PAD
Ankle cushion that is also used in the
World Cup ensures a perfect fit and
excellent heel stability.
38