Untitled - PTS Plumbing Trade Supplies

Warm Air Heaters
Warm Air Heaters
Powrmatic
NV Range
Introduction
Powrmatic NV units can be supplied for either free blowing
or ducted applications. The NV model is the standard unit
for most installations but NV room sealed units are also
recommended where there is a contaminated atmosphere
and combustion air is required from outside with a sealed
system kit.
Application
Both NV units can be used in light commercial or
commercial installations to heat buildings such as
factories, warehouses, superstores, garages etc.
Range
Heat output: 10kW to 140kW
Mounting height: 2.5m - 5.0m to underside of unit
Features and benefits
Horizontal or downward discharge
Freeblowing or ducted option
Wide range of heat outputs
No floor space utilised
Large range of accessories available
ECA approval (Enhanced Capital Allowance)
Simple maintenance
Powrmatic CP/NCA & CP
Cabinet Heaters
Introduction
Powrmatic models CP/NCA and CPE units are indirect
fired cabinet heaters and must have a flue connected to
exhaust the products of combustion to external
atmosphere. CP/NCA and CP models can burn either
Natural Gas, LPG or Oil and can be supplied for
freeblowing or ducted discharge.
Application
Used in light commercial installations to heat building
volumes such as factories, warehouses etc. CP/NCA and
CP can be floor standing, suspended horizontally or
counterflow mounted.
Range
Heat output:
CP/NCA 100 to 300: 29kW to 88kW
CP 100 to 300: 29kW to 88kW
Larger sizes available
Features and benefits
Floor standing or suspended option
Wide range of heat outputs
Remote Powrtrol controller supplied as standard
Override for summer cooling
Painted white (RAL 9003)
Other colours available to special order
14
For full product details please refer to manufacturers literature or websites