Link to Class A Certificate of Compliance - CC Technology ...

Certificate of Compliance
Certificate: 1287069 Master Contract: 203633
Project: 1592771 (Edition 3) Date Issued: April 22, 2005
Issued to:
C.C. Technology, Inc.
3201 West Wall
Midland, TX 79701
USA
The products listed below are eligible to bear the CSA Mark shown
with adjacent indicators 'C' and 'US'
Issued by:
Marty Klaassen, P. Eng.
Product Certification Engineer
CLASS
Authorized by: Patricia Pasemko
Operation Manager
2258 02 - PROCESS CONTROL EQUIPMENT - For Hazardous Locations
2258 82 - PROCESS CONTROL EQUIPMENT - For Hazardous Locations – Certified to US Requirements
PRODUCTS
CLASS I, DIVISION 1, GROUPS A, B, C, and D; Temperature Code T4A.
For Canada: Ex md IIC
For United States: Class I Zone 1 AEx md IIC
Model Proflo JR Fluid Flow Alarm. Battery powered (rated 3.6Vdc nom.) and permanently mounted. FET
switch rating of 300 Vdc/120 Vac @ 0.5 A. Switch closure rating of 200Vac/Vdc @ 0.5 A. Maximum Ambient
of +80º C. Used with the following batteries:
Type Manufacturer Part No
Lithium “AA” Size Tadrian TL2100
Lithium “AA” Size Tadrian TL4903
Lithium “AA” Size Tadrian TL5903
Lithium “AA” Size Tadrian TL5101* Factory Supplied
Lithium “AA” Size Tadrian TL5104
Proflo Proximity Switch. Permanently Mounted. Temperature Code T5. “Dry Contacts” Rated: 30.0Vdc @ 0.2A
max.
The 'C' and 'US' indicators adjacent to the CSA Mark signify that the product has been evaluated to the applicable CSA and ANSI/UL Standards, for use in Canada and
the U.S., respectively. This 'US' indicator includes products eligible to bear the 'NRTL' indicator. NRTL, i.e. National Recognized Testing Laboratory, is a designation
granted by the U.S. Occupational Safety and Health Administration (OSHA) to laboratories which have been recognised to perform certification to U.S. Standards.
FF0 2
DQD 507WD 2001/08/07

Certificate: 1287069
Project: 1417451
Master Contract: 203633
Date: April 22, 2005
CLASS I, DIVISION 2, GROUPS A, B, C, and D; Temperature Code T4A.
Model Proflo 1 Fluid Flow Monitor. Battery powered (rated 3.0Vdc nom.) and permanently mounted. Non-
Incendive and Suitable for Class I, Div. 2, Groups A, B, C and D; Hazardous Locations. Temperature Code T4A.
Rated Outputs; Output Switch: 36.0Vdc @ 0.5A max. Cycle Output Switch: 36Vdc @ 0.5A max. Input Switch:
“Dry Contacts Only”. Used with the following battery type:
Type Manufacturer Part No.
Alkaline “AA” Size Duracell MN1500
Alkaline “AA” Size Kodak KAA
Model Proflo 2 Fluid Flow Monitor. Permanently Mounted. Non-Incendive and Suitable for Class I, Div. 2,
Groups A, B, C and D; Hazardous Locations. Temperature Code T4A. Rated Input: 24.0Vdc @ 20mA Rated
Outputs; Output Switch: 36.0Vdc @ 0.5A max. Cycle Output Switch: 30.0Vdc @ 40mA max. Input Switch: “Dry
Contacts Only”. RS-485 communication capable
APPLICABLE REQUIREMENTS
The following Standards were used as a guide in the evaluation of the product covered by this report:
CSA Std C22.2 No 0-M1991 - General Requirements, Canadian Electrical Code, Part II
CSA Std C22.2 No 0.4-M2004 - Bonding and Grounding of Electrical Equipment (Protective Grounding)
CSA Std C22.2 No 0.5-M1982 - Threaded Conduit Entries
CSA Std C22.2 No 30-M1987 - Explosion-Proof Enclosures for Use in Class I Hazardous Locations.
CSA Std C22.2 No 142-M1987 - Process Control Equipment
CSA Std. C22.2 No.213-M1987 - Non-Incendive Electrical Equipment for Use in Class I, Division 2
(Reaffirmed 1999)
CAN/CSA/UL-E60079-0:02 - Electrical apparatus for explosive gas atmospheres Part 0: General
Requirements
CAN/CSA/UL-E60079-1:02 - Electrical apparatus for explosive gas atmospheres Part 1:Flameproof ”d”
CAN/CSA/UL-E60079-18:02 - Electrical apparatus for explosive gas atmospheres Part 18 Encapsulation
“m”
ANSI/UL Standards UL 508 - Industrial Control Equipment
ANSI/UL Standards UL 1203 - Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use
in Hazardous (Classified) Locations
ANSI/UL Standards UL1604 - Electrical Equipment for Use in Class I and II, Division 2, and Class III
Hazardous (Classified) Locations
DQD 507WD 2001/08/07

Supplement to Certificate of Compliance
Certificate: 1287069 Master Contract: 203633
The products listed, including the latest revision described below,
are eligible to be marked in accordance with the referenced Certificate.
Project Date Description
Product Certification History
1287069 January 31, 2002 Original Certification of Models Proflo 1 and Proflo 2, Fluid Flow Monitors and
Proflo Proximity Switch. Permanently mounted, battery and D.C. powered
instruments. Non-Incendive; for Class I, Div. 2, Groups A, B, C and D,
temperature code “T4A”
1417451 March 6, 2003 Update to report 1287069 to update pcb and housing and corrections to report.
1592771 April 22, 2005
Update report to include proflo Jr. No Flow Alarm and Captured Proximity Switch
for CSA_C_US - Class I Div 1 Groups A, B, C, D; Ex dm IIC
DQD 507WD 2001/08/07

This report shall only be reproduced in full, otherwise, written permission of CSA International is required.
C:\Documents and Settings\Curtis\Desktop\CCT Catalog prices & Brochures 2008\proflo Jr\proflo-proflo Jr Prox cls 1 div 1 cert .doc