SPORTBIKE

SPORTBIKE
YZF-R1 ®
YZF-R6 ®
FZ1 ®
FZ6R
FZ6
FJR 1300
Sportbike Stands
“Distributed by Yamaha” Accessories

SPORTBIKE
FJR YZF-R1 1300
®
1a
YZF-R1 ® Accessories
PERFORMANCE
1b
2a
1. GYTR ® Carbon Fiber Dual-Slip-On
Mufflers
Provides a significant increase in power throughout the
rpm range with a maximum 4-hp gain while providing up
to a 2 ft-lb increase in torque. Carbon fiber muffler shell
with brushed stainless steel inlet pipe and end cap.
Billet aluminum muffler mounts. Completely rebuildable.
2.4 pounds lighter than stock. Meets 2010 AMA ®
sound requirements.
For closed-course competition only
(see Important Note below).
a. Fits ’09~’10 R1
14B-E47A0-V0-00 $999.95
Provides a significant increase in power throughout the
rpm range with a 4-hp maximum gain while providing up
to a 3 ft-lb increase in torque. Carbon fiber muffler shell
with brushed stainless steel inlet pipe and end cap.
Aluminum muffler mounts. Completely rebuildable. 2
pounds lighter than stock.
For closed-course competition only
(see Important Note below).
b. Fits ’07~’08 R1
GYT-4C893-80-CF $999.95
Repack Kit for GYTR ® Dual Slip-On
Mufflers
Kit includes two packing suits, one for each muffler. For
use in GYTR ® Carbon Fiber Dual Slip-On Mufflers.
(Not Shown)
GYT-4C893-33-KT $48.95
2. GYTR ® High Flow Air Filter
Offers increased air flow and excellent filtration for
performance applications. Washable and reusable.
Service with Genuine Yamaha Gauze Filter Cleaner and
Filter Oil, both available from your Yamaha dealer.
a. Fits ’09~’10 R1
14B-E41D0-V0-00 $79.95
b. Fits ’07~’08 R1
GYT-4C895-00-00 $104.95
2b

SPORTBIKE
FJR YZF-R1 1300
®
3. GYTR ® Sprockets
Front sprockets are manufactured from heat-treated
chromoly steel, are CNC-machined to extremely high
tolerances, and have a zinc finish to avoid corrosion.
Rear sprockets are black anodized and made from
7075-T6 billet aluminum (1/3 the weight of steel). CNCmachined
for maximum fit accuracy and long-lasting
durability.
Sprocket sizes other than stock are for closedcourse
competition only. Changing the final
drive ratio affects exhaust emissions and also
affects speedometer readings.
530 Series
a. Front
Gold/Raw Finish
Fits ‘98~’09 R1
16T
ABA-0SS56-20-10 $33.49
17T
ABA-0SS56-20-05 $33.49
b. Rear
Black Anodized
Fits ’98~’09 R1
43T
GYT-0SS56-20-06 $69.95
44T
GYT-0SS56-20-07 $69.95
45T
GYT-0SS56-20-08 $69.95
46T
GYT-0SS56-20-09 $69.95
3a
3b
4. Yamaha YZF-R1 Clutch Kit
This complete Genuine Yamaha Clutch Kit includes the
plates, springs, and gaskets, ready to install. Refer to
service manual for installation instructions.
Fits ’09~’10 R1
GYT-14BW0-01-00 $189.99
Fits ’07~’08 R1
4C8-W001G-00-00 $189.99 4
IMPORTANT NOTE:
All street-legal motorcycles models are regulated by the EPA and state law. This accessory affects exhaust emissions and is for
closed-course competition only. Use on public roads constitutes illegal tampering punishable by law.

SPORTBIKE
YZF-R1 ®
1
CARBON FIBER
1. GYTR ® Carbon Fiber Tank Trim
Easy to install for a stylish appearance. (Set of two.)
Fits ’09~’10 R1
14B-F41F0-V0-00 $324.95
2
2. GYTR ® Carbon Fiber Top Clamp Panel
Accent your top fork clamp with this, easy-to-install
carbon fiber piece.
Fits ’07~’08 R1
ABA-4C827-17-00 $29.95
3. GYTR ® Carbon Fiber Rear Fender
This lightweight, highly stylized carbon fiber rear fender
simply replaces stock.
Fits ’09~’10 R1
14B-F16F0-V0-00 $299.95
3 4
5 6
4. GYTR ® Carbon Fiber Chain Guard
This lightweight, highly stylized carbon fiber chain guard
replaces stock and adds a touch of style to your bike.
Fits ’09~’10 R1
14B-F21E0-V0-00 $239.95
5. GYTR ® Carbon Fiber Heat Shields
These carbon fiber shields simply replace stock. Makes
a stylish addition when installed with slip-on mufflers.
Fits ’09~’10 R1 (Shown)
14B-F74D0-V0-00 $599.95
Fits ’07~’08 R1
GYT-4C826-01-00 $299.95
6. GYTR ® Carbon Fiber Airbox Cover
This strong but lightweight airbox cover features a
great-looking carbon fiber weave. Lighter than stock.
Mounts using stock hardware.
Fits ’09~’10 R1
14B-F41G0-V0-00 $369.95
7
7. GYTR ® Carbon Fiber Heel Guard Trim
These lightweight carbon fiber trim pieces are adhesivebacked
for quick and easy installation.Two-piece set.
(One side shown here).
Fits ’09~’10 R1
14B-F74C0-V0-00 $24.95

SPORTBIKE
YZF-R1 ®
SEATS & COWLS
8. R1 ® Comfort Seat
a. Fits ‘09~’10 R1
Newly engineered comfort seat for the ultimate riding
experience. Made from dual-density multi-layered
foam that incorporates the newest technology in seat
development, making a gel layer unnecessary.
14B-F47C0-V0-00 $239.95
b. Fits ’07~’08 R1
A layer of gel is built into this seat to increase rider
comfort. A unique carbon fiber weave pattern is used in
key areas for extra grip. Features the R1 logo.
GYT-4C821-00-00 $189.95
9. R1 Seat Cowls
Quickly change the styling of your bike by adding a colormatched
seat cowl.
Fits ’09~’10 R1
a. Team Yamaha Blue
14B-F47F0-V0-00 $199.95
b. Raven
14B-F47F0-T0-00 $199.95
Fits ’09 R1
c. Pearl White (with red pad)
14B-F47F0-S0-00 $199.95
d. Cadmium Yellow
14B-F47F0-U0-00 $199.95
Fits ’08 R1
e. Raven
ABA-4C825-10-03 $224.95
Fits ’07~’08 R1
f. Team Yamaha Blue
ABA-4C825-10-00 $224.95
Candy Red
ABA-4C825-10-02 $224.95
Fits ’07 R1
Charcoal Silver
ABA-4C825-10-01 $224.95
Fits ’05~’06 R1
g. Black
5VY-W0771-40-00 $193.95
Fits ’04~’06 R1
h. Team Yamaha Blue
5VY-W0771-00-00 $193.95
8a
9a
9c
9e
9g
8b
9b
9d
9f
9h

SPORTBIKE
YZF-R1 ®
1a
1b
2
WINDSHIELDS
1. Raised Bubble Windscreen
Made from high-quality polycarbonate. The shape
channels the flow of air over the rider, reducing the
amount of air directed at the rider’s torso.
Fits ’09~’10 R1
a. Clear
14B-F83J0-V0-00 $84.95
b. Tinted
14B-F83J0-U0-00 $109.95
2. Smoked Windshields
Customize your bike with this replacement smoked
windshield. Windshield has stock shape and uses stock
mounting hardware.
Fits ’07~’08 R1
ABA-4C803-21-00 $78.95
Fits ’04~’06 R1
GYT-5VY03-10-00 $79.95
FUNCTION & STYLE
3. Tag Eliminator
Allows for the removal of the stock license tag holder.
Moves license plate up 4-5/8" and in 3-1/2" from stock.
Includes all necessary components to maintain all legal
requirements.
Fits ’09~’10 R1
14B-F16E0-V0-00 $129.95
4. Frame Slider Protectors
Helps protect the frame and bodywork on a low-side fall.
(Set of two.)
Fits ’09~’10 R1 (Shown)
14B-F11D0-V0-00 $104.95
Fits ’07~’08 R1
GYT-4C833-10-00 $109.95
3 4

SPORTBIKE
YZF-R1 ®
5. Axle Blocks
Add some personalization to your R1 with these
anodized billet aluminum axle blocks. Replaces stock.
Three color options.
Fits ’09~’10 R1
Black
14B-F53R0-U0-00 $59.95
Blue
14B-F53R0-V0-00 $59.95
Red
14B-F53R0-T0-00 $59.95
6. Engine Plugs
Add some personalization to your R1 with these
anodized billet aluminum engine plugs. Replaces the
stock 42mm crank access cover on the right side. Three
color options.
Fits ’03~’10 R1
Blue
ABA-13S27-14-01 $32.95
Red
ABA-13S27-14-02 $32.95
Silver
ABA-13S27-14-00 $32.95
7. NEW! Bar Ends
These handlebar ends are CNC-machined, aluminum
anodized, and feature a carbon fiber inlay. These bar
ends incorporate weights to mimic the stock weight
so that vibration is kept at a minimum. Helps protect
handlebars in the event of a fall.
Fits ’02~’10 R1
Black
14B-F62C0-V0-00 $49.95
Blue
14B-F62C0-U0-00 $49.95
Red
14B-F62C0-T0-00 $49.95
8. R1 Grips
These duo-density rubber grips feature the R1 logo and
reduce rider fatigue for increased comfort.
Fits ’07~’10 R1
Black
14B-F62B0-V0-00 $16.95
Blue
14B-F62B0-U0-00 $16.95
White
14B-F62B0-T0-00 $16.95
5
7
8
6

SPORTBIKE
YZF-R1 ®
1a
1c
1e
3a
1b
1d
2
3b
1. Tank Pads
Help protect your gas tank from nicks and abrasions
caused by belt buckles, snaps, or zippers.
Fits ’09~’10 R1
a. Brushed Metal Look
14B-F41D0-T0-00 $32.95
b. Carbon Fiber Look
14B-F41D0-V0-00 $32.95
c. Red Carbon Fiber Look
14B-F41D0-U0-00 $32.95
d. White
14B-F41D0-S0-00 $32.95
e. Fits ’07~’08 R1
Carbon Fiber Look
ABA-4C849-24-00 $32.95
Chrome Look
ABA-4C849-24-01 $32.95
2. Sport Tank Bag with Map Pouch
Polyester construction with a neoprene pad for tank
surface protection. Strong magnets hold the bag in
place. Also features a convenient, sealed map pouch on
top of bag. Measures 12" x 9-3/4" x 6".
Fits ’03~’08 R1
ABA-2C064-00-00 $59.95
CAUTION: Do not put goods into tank bag that may be sensitive to
magnetic fields (magnetic media, electronic equipment, etc.).
3. Bike Cover
Made from premium, ultra-durable Sur Last ® solutiondyed
polyester fabric. Resists fading and protects your
bike from the elements. Custom tailored for a precise
fit.
Fits ’07~’10 R1
a. Black
ABA-4C828-00-00 $119.95
b. Blue
ABA-4C828-00-01 $119.95

SPORTBIKE
YZF-R6 ®
YZF-R6 ® Accessories
PERFORMANCE
4. GYTR ® Slip-On Muffler
Designed to increase power throughout the rpm range.
Choose either the carbon fiber with brushed finish
stainless steel inlet and end cap, or polished aluminum
muffler shell with polished stainless steel inlet and
end caps. Machined billet aluminum mount bracket.
Completely rebuildable.
For closed course competition only
(see Important Note below).
Fits ’06~’10 R6
a. Carbon Fiber
GYT-2C093-01-CF $256.95
b. Aluminum
GYT-2C093-01-AL $204.95
Repack Kit for GYTR ® Oval Muffler
(Not shown)
Fits 9" muffler on ’06~’10 R6
GYT-2C093-33-KT $24.95
5. GYTR ® High Flow Air Filter
Offers increased air flow and excellent filtration for
performance applications. Washable and reusable.
Service with Genuine Yamaha Gauze Filter Cleaner and
Filter Oil, both available from your Yamaha dealer.
a. Fits ’08~’10 R6
GYT-13S95-01-00 $109.95
b. Fits ’06~’07 R6
GYT-2C095-02-00 $104.95
4a
5a
6a
7
4b
5b
6b
6. GYTR ® Sprockets
Front sprockets are manufactured from heat-treated
chromoly steel, are CNC-machined to extremely high
tolerances and have a zinc finish to avoid corrosion.
Rear sprockets are black anodized and made from
7075-T6 billet aluminum (1/3 the weight of steel).
Also CNC-machined for maximum fit accuracy and longlasting
durability.
Sprocket sizes other than stock are for closedcourse
competition only. Changing the final
drive ratio affects exhaust emissions and also
affects speedometer readings.
525 Series
a. Front
Fits ’06~’09 R6
Gold/Raw Finish
16T
ABA-0SS56-20-01 $29.95
b. Rear
Fits ‘06~’09 R6
Black Anodized
44T
ABA-0SS56-20-03 $69.95
45T
ABA-0SS56-20-02 $69.95
46T
ABA-0SS56-20-04 $69.95
7. Yamaha YZF-R6 Clutch Kit
This complete Genuine Yamaha Clutch Kit includes
the needed plates, springs, and gaskets all together,
ready to install. Refer to service manual for installation
instructions.
Fits ’06~’10 R6
2C0-W001G-00-00 $189.99
IMPORTANT NOTE:
All street-legal motorcycles models are regulated by the EPA and state law. This accessory affects exhaust emissions and is for
closed-course competition only. Use on public roads constitutes illegal tampering punishable by law.

SPORTBIKE
YZF-R6 ®
1
CARBON FIBER
1. GYTR ® Carbon Fiber Fairing Accents
Give your bike an extra touch of class with these
lightweight carbon fiber accents. (Sold in pairs.) Mounts
using stock hardware.
Fits ’08~’10 R6
GYT-13S27-20-00 $259.95
Fits ’06~’07 R6
GYT-2C027-20-CF $259.95
2. GYTR ® Carbon Fiber Lower Tank Trim
Easy to install for a stylish appearance. (Set of two.)
Fits ’08~’10 R6
GYT-13S49-27-00 $398.95
Fits ’06~’07 R6
GYT-2C027-40-CF $399.00
3. GYTR ® Carbon Fiber Heel Guard Trim
These lightweight carbon fiber trim pieces are adhesivebacked
for quick and easy installation.
Fits ’08~’10 R6
ABA-13S27-54-00 $27.95
2 3

SPORTBIKE
YZF-R6 ®
SEATS & COWLS
4 5a
4. R6 Comfort Seat
A layer of gel is built into this seat to increase rider
comfort. A unique carbon fiber weave pattern is used in
key areas for extra grip. Features the R6 logo.
Fits ’08~’10 R6
ABA-13S21-00-00 $209.95
5. R6 Seat Cowls
Quickly change the styling of your bike by adding a colormatched
seat cowl.
Fits ’08~’10 R6
Raven (not shown)
ABA-13S25-10-01 $234.95
a. Team Yamaha Blue
ABA-13S25-10-00 $234.95
Fits ’09 R6
Silver with Red Pad (not shown)
(matches cowl on ’09 Pearl White R6)
ABA-13S25-10-03 $234.95
Fits ’08 R6
b. Liquid Silver
ABA-13S25-10-02 $234.95
Fits ’07 R6
c. Candy Red
ABA-2C025-10-00 $189.95
Charcoal Silver (not shown)
ABA-2C025-10-01 $189.95
Fits ’06~’07 R6
d. Team Yamaha Blue
ABA-2C025-10-BL $189.95
Fits ’06 R6
Black (not shown)
ABA-2C025-10-BK $189.95
e. Yellow
ABA-2C025-10-YW $189.95
5b
5d
5c
5e

SPORTBIKE
YZF-R6 ®
1 2
WINDSHIELDS
1. Tinted Windshield
Customize your bike with this tinted replacement
windshield. Windshield has stock shape and uses stock
hardware.
Fits ’08~’10 R6
ABA-13S03-20-00 $84.95
Fits ’06~’07 R6
ABA-2C003-20-00 $73.95
3
2. Raised Bubble Tinted Windscreen
Customize your bike with this tinted replacement
windshield. Design adds an aerodynamic element and
unique style. Windshield uses stock hardware.
Fits ’08~’10 R6
ABA-13S03-21-00 $99.95
Stock
With Tag Eliminator
FUNCTION & STYLE
3. Tag Eliminator
Allows for the removal of the stock license tag holder.
Includes all necessary components to maintain all legal
requirements.
Fits ’08~’10 R6
ABA-13S12-10-00 $109.95
4. Frame Sliders
Helps protect the frame and bodywork on a low-side
fall. Black anodized with solid black hardware for a more
integrated look.
(Set of two.)
Fits ’08~’10 R6 (Shown)
GYT-13S33-10-00 $99.95
Fits ’06~’07 R6
GYT-2C033-10-BK $99.95
4 5
5. Axle Adjusters
Add some personalization to your R6 with these
anodized billet aluminum axle adjusters. Replaces the
stock 42mm crank access cover on the right side. Three
color options.
Fits ’06~’10 R6
Black
ABA-13S92-72-00 $49.95
Blue
ABA-13S92-72-01 $49.95
Red
ABA-13S92-72-02 $49.95

SPORTBIKE
YZF-R6 ®
6. Engine Plugs
Add some personalization to your R6 with an anodized
billet aluminum engine plug. Replaces the stock 42mm
crank access cover on the right side. Three color
options.
Fits ’03~’10 R6
Blue
ABA-13S27-14-01 $32.95
Red
ABA-13S27-14-02 $32.95
Silver
ABA-13S27-14-00 $32.95
7. NEW! Bar Ends
These handlebar ends are CNC-machined, aluminum
anodized, and feature a carbon fiber inlay. These bar
ends incorporate weights to mimic the stock weight
so that vibration is kept at a minimum. Helps protect
handlebars in the event of a fall.
Fits ’06~’10 R6
Black
14B-F62C0-V0-00 $49.95
Blue
14B-F62C0-U0-00 $49.95
Red
14B-F62C0-T0-00 $49.95
6
7
8. R6 ® Grips
These duo-density rubber grips feature the R6 logo and
help reduce rider fatigue for increased comfort.
Fits ’08~’10 R6
Black
13S-F62B0-V0-00 $16.95
Blue
13S-F62B0-U0-00 $16.95
White
13S-F62B0-T0-00 $16.95
9. R6 Tank Pads
Helps protect your gas tank from nicks and abrasions
caused by belt buckles, snaps, or zippers.
a. Fits ’08~’10 R6
Carbon Fiber Look
ABA-13S49-24-00 $27.95
Liquid Chrome Look
ABA-13S49-24-01 $27.95
Urban Camo
ABA-13S49-24-02 $27.95
Fits ’06~’07 R6
b. Carbon Fiber Look
ABA-2C049-24-CF $36.95
c. Chrome Look
ABA-2C049-24-00 $36.95
8 9a
9b
9c

SPORTBIKE
YFZ-R6 ®
1
1. Sport Tank Bag with Map Pouch
Polyester construction with a neoprene pad for tank
surface protection. Strong magnets hold the bag in
place. Also features a convenient, sealed map pouch
on top of bag. Measures 12" x 9-3/4" x 6".
Fits ’06~’10 R6
ABA-2C064-00-00 $59.95
CAUTION: Do not put goods into tank bag that may be sensitive to
magnetic fields (magnetic media, electronic equipment, etc.).
2. R6 Bike Covers
Made from premium, ultra-durable Sur Last ® solutiondyed
polyester fabric. Resists fading, and helps protect
your bike from the elements. Custom tailored for a
precise fit.
Fits ’02~’10 R6
a. Black
ABA-2C028-00-BK $109.95
b. Blue
ABA-2C028-00-BL $109.95
2a
2b

SPORTBIKE
FZ1 ®
FZ1 ® Accessories
3
PERFORMANCE
3. GYTR ® Slip-On Exhaust
Designed to improve the performance of your FZ1
from idle to redline. Features a lightweight carbon
fiber muffler shell with polished stainless steel tubing,
stamped inlet cap, new cone-style outlet cap and a billet
aluminum mount. 70% lighter than stock.
For closed course competition only
(see Important Note below).
Fits ’06~’10 FZ1
GYT-3C393-01-CF $469.95
Repack Kit for GYTR ® Slip-On Exhaust
(Not shown)
Repack Kit for 16" GYTR ® Slip-On Exhaust for the
FZ1. High-quality fiber packing cartridge. Comes on a
cardboard sleeve for easy installation.
GYT-5TA93-33-KT $26.95
4. GYTR ® Sprockets
Front sprockets are manufactured from heat-treated
chromoly steel, are CNC-machined to extremely high
tolerances and have a zinc finish to avoid corrosion and
feature self-cleaning grooves. Rear sprockets are black
anodized and made from 7075-T6 billet aluminum (1/3
the weight of steel). Also CNC-machined for maximum
fit accuracy and long-lasting durability.
Sprocket sizes other than stock are for closedcourse
competition only. Changing the final
drive ratio affects exhaust emissions and also
affects speedometer readings.
530 Series
a. Front
Gold/Raw Finish
Fits ‘01~’09 FZ1
16T
ABA-0SS56-20-10 $33.49
17T
ABA-0SS56-20-05 $33.49
b. Rear
Black Anodized
Fits ‘01~’09 FZ1
43T
GYT-0SS56-20-06 $69.95
44T
GYT-0SS56-20-07 $69.95
45T
GYT-0SS56-20-08 $69.95
46T
GYT-0SS56-20-09 $69.95
4a
4b
IMPORTANT NOTE:
All street-legal motorcycles models are regulated by the EPA and state law. This accessory affects exhaust emissions and is
for closed-course competition only. Use on public roads constitutes illegal tampering punishable by law.

SPORTBIKE
FZ1 ®
1
SEATS & WINDSHIELDS
2
4
3
1. FZ1 Comfort Seat
A layer of gel built into this seat increases rider
comfort. A unique carbon fiber weave pattern used in key
areas for extra grip. Features the FZ1 logo.
Fits ’06~’10 FZ1
ABA-3C321-00-00 $189.95
WINDSHIELDS
2. Touring Windshield
Durable polycarbonate construction. 4" taller and 3"
wider (1-1/2" per side) than stock for added wind
protection.
Fits ’06~’10 FZ1
ABA-3C303-10-00 $99.95
3. FZ1 Tall Windshield
Windshield is 2" taller than stock and 3" wider overall
for added wind protection.
Fits ’02~’05 FZ1
ABA-5LV03-00-00 $89.95
BODY
4. Lower Fairing Kits
Thermo-formed plastic construction to ensure a factory
fit. Color matched to stock plastic components. Kit
includes all mounting hardware.
Fits ’08~’09 FZ1
Granite Gray
ABA-3C301-10-02 $639.95
Fits ’07 and ’09 FZ1
Cobalt Blue
ABA-3C301-10-01 $639.95
Fits ’07 and ’10 FZ1
Raven
ABA-3C301-10-00 $639.95
Fits ’06 FZ1
Liquid Silver
ABA-3C301-20-01 $639.95
Fits ’06, ’08, and ’10 FZ1
Shift Red/ Candy Red (Shown)
ABA-3C301-20-00 $639.95

SPORTBIKE
FZ1 ®
5. Lower Cowls
Thermo-formed plastic construction to ensure a factory
fit. Color matched to stock plastic components.
Fits ’08~’09 FZ1
Granite Gray
ABA-3C308-10-02 $349.95
Fits ’07 and ’09 FZ1
Cobalt Blue (Shown)
ABA-3C308-10-01 $349.95
Fits ’07 and ’10 FZ1
Raven
ABA-3C308-10-00 $349.95
Fits ’06, ’08, and ’10 FZ1
Shift Red/ Candy Red
ABA-3C308-00-00 $349.95
6. FZ1 Retro Body Kit
This body kit for your FZ1 comes with a tank, airbox
cover, seat cowl, rim tape, front fairing, rear fairing,
and front fender.
Fits ’06~’10 FZ1
Black/ White/ Red
GYT-3C311-10-KT $1,599.95
FUNCTION & STYLE
6
5
7. Engine Plugs
Add some personalization to your FZ1 with an anodized
billet aluminum engine plug. Replaces the stock 42mm
crank access cover on the right side. Three color
options.
Fits ’03~’10 FZ1
Blue
ABA-13S27-14-01 $32.95
Red
ABA-13S27-14-02 $32.95
Silver
ABA-13S27-14-00 $32.95
8. Tank Pads
Helps protect your gas tank from nicks and abrasions
caused by belt buckles, snaps, or zippers.
Chrome Look
GYT-5SL49-24-CH $29.95
Carbon Fiber Look
GYT-5SL49-24-CF $29.95
9. Fuel Cap Accents
Add this to your fuel cap for a custom look.
Chrome Look
GYT-5SL49-28-CH $24.95
Carbon Fiber Look
GYT-5SL49-28-CF $24.95
7 8
9 10
10. Bike Cover
Made from premium, ultra-durable Sur Last ® solutiondyed
polyester fabric. Resists fading, and helps protect
your bike from the elements. Custom tailored for a
precise fit.
Fits ’06~’10 FZ1
Black
ABA-3C328-00-BK $109.95

SPORTBIKE
FZ6R
1 2
FZ6R Accessories
3a
3c
4a
3b
3d
4b
PERFORMANCE
1. GYTR ® High Flow Air Filter
Offers increased airflow and excellent filtration for
performance applications. Washable and reusable.
Service with Genuine Yamaha Gauze Filter Cleaner and
Filter Oil, both available from your Yamaha dealer.
Fits ’09~’10 FZ6R
36P-E41D0-V0-00 $59.95
SEATS & COWLS
2. FZ6R Comfort Seat
A layer of gel built into this seat increases rider
comfort. A unique carbon fiber weave pattern used in
key areas for extra grip. Features the FZ6R logo.
Fits ’09~’10 FZ6R
36P-F47C0-V0-00 $189.95
3. FZ6R Seat Cowls
Quickly change the styling of your bike by adding a color
matched seat cowl.
Fits ’09~’10 FZ6R
a. Pearl White
36P-F47F0-S0-00 $199.95
b. Raven
36P-F47F0-T0-00 $199.95
c. Team Yamaha Blue
36P-F47F0-V0-00 $199.95
Fits ’09 FZ6R
d. Cadmium Yellow
36P-F47F0-U0-00 $199.95
WINDSHIELDS
4. Raised Bubble Windscreen
Made from high-quality, hard coated polycarbonate. The
shape channels the flow of air over the rider, reducing
the amount of air directed at the rider’s torso.
Fits ’09~’10 FZ6R
a. Clear
1" taller than stock windscreen.
36P-F83J0-U0-00 $69.95
b. Tinted
Same as stock height.
36P-F83J0-V0-00 $99.95

SPORTBIKE
FZ6R
FUNCTION & STYLE
5 6
5. Frame Sliders
Helps protect the frame and bodywork in the event of
a low-side fall. Requires some modification of stock
fairing. (Set of two.)
Fits ’09~’10 FZ6R
36P-F11D0-V0-00 $109.95
6. FZ6R Grips
These duo-density rubber grips feature the FZ6R logo
and reduce rider fatigue for increased comfort.
Fits ’09~’10 FZ6R
Black
36P-F62B0-V0-00 $16.95
Blue
36P-F62B0-U0-00 $16.95
White
36P-F62B0-T0-00 $16.95
7 8
7. Bar Ends
These handlebar ends are CNC-machined, aluminum
anodized with a black zinc-plated mount. Ends feature a
carbon fiber inlay. These bar ends incorporate weights
to mimic the stock weight so that vibration is kept at
a minimum. Helps protect handlebars in the event of a
fall.
Fits ’09~’10 FZ6R
Black
36P-F62C0-V0-00 $49.95
Blue
36P-F62C0-U0-00 $49.95
Red
36P-F62C0-T0-00 $49.95
8. Engine Plugs
Add some personalization to your FZ6R with an anodized
billet aluminum engine plug. Replaces the stock 42mm
crank access cover on the right side. Three color
options.
Fits ’09~’10 FZ6R
Blue
ABA-13S27-14-01 $32.95
Red
ABA-13S27-14-02 $32.95
Silver
ABA-13S27-14-00 $32.95
9. FZ6R Tank Pads
Help protect your gas tank from nicks and abrasions
caused by belt buckles, snaps or zippers. Features the
FZ6R logo.
Fits ’09~’10 FZ6R
a. Brushed Metal Look
36P-F41D0-T0-00 $32.95
b. Carbon Fiber Look
36P-F41D0-V0-00 $32.95
c. Red Carbon Fiber Look
36P-F41D0-U0-00 $32.95
d. White
36P-F41D0-S0-00 $32.95
9a
9c
9b
9d

SPORTBIKE
FZ6R /FZ6
1
3
5
2
4
1. Fuel Cap Acccents
Fits ’09~’10 FZ6R
Add this to your fuel cap for a custom look.
Chrome Look
GYT-5SL49-28-CH $24.95
Carbon Fiber Look
GYT-5SL49-28-CF $24.95
2. Sport Tank Bag
Top quality UV-treated Tri-Max ® ballistic nylon.
Contoured to match tank shape. Fully lined interior,
heavy-duty zippers with pull fobs, reflective patch
logo, map pocket, side pockets with charging cable
accommodation. Lightweight powerful magnets allow for
quick attachment and removal while Micro Hug base
material holds bag firm without slippage or marking the
bike.
Fits ’09~’10 FZ6R
Black
36P-F41E0-V0-00 $89.95
CAUTION: Do not put goods into tank bag that may be sensitive to
magnetic fields (magnetic media, electronic equipment, etc.).
3. FZ6R Bike Cover
Made from premium, ultra-durable Sur Last ® solutiondyed
polyester fabric. Resists fading, and helps protect
your bike from the elements. Custom tailored for a
precise fit.
Fits ’09~’10 FZ6R
Black
36P-F81A0-V0-00 $119.95
6
FZ6 Accessories
SEATS
4. FZ6 Comfort Seat
A layer of gel is built into this seat to increase rider
comfort. A unique carbon fiber weave pattern used in
key areas for extra grip. Features the FZ6 logo.
Fits ’07~’09 FZ6
ABA-4S821-00-00 $259.95
WINDSHIELDS
5. FZ6 Touring Windshield
Durable polycarbonate construction. 2-1/2" taller than
stock and 4-1/2" wider (2-1/4" per side) for added wind
protection.
Fits ’07~’09 FZ6
ABA-4S803-10-00 $124.95
6. FZ6 Tall Windshield
Windshield is 4" taller than stock and 3" wider overall
for added wind protection.
Fits ’04~’06 FZ6
5VX-28381-20-00 $115.95

SPORTBIKE
FZ6
BODY
7. Lower Cowls
Thermo-formed plastic construction to ensure a factory
fit. Color matched to stock plastic components. Kits
include all mounting hardware.
Fits ’08~’09 FZ6
Raven
ABA-5VX08-10-04 $299.95
Fits ’08 FZ6
Cobalt Blue
ABA-5VX08-10-05 $299.95
Fits ’06~‘07 FZ6
Blue
ABA-5VX08-10-00 $299.95
Fits ’06~’07 FZ6
Candy Red/ Shift Red (Shown)
5VX-W0714-44-00 $299.95
Fits ’05 FZ6
Cerulean Silver
ABA-5VX08-10-03 $314.95
Fits ’04~’05 FZ6
Galaxy Blue
ABA-5VX08-10-01 $314.95
Fits ’04 FZ6
Liquid Silver
ABA-5VX08-10-02 $314.95
7
8 9
FUNCTION & STYLE
8. Tank Pads
Help protect your gas tank from nicks and abrasions
caused by belt buckles, snaps, or zippers.
Chrome Look
GYT-5SL49-24-CH $29.95
Carbon Fiber Look
GYT-5SL49-24-CF $29.95
9. Fuel Cap Accents
Add this to your fuel cap for a custom look.
Chrome Look
GYT-5SL49-28-CH $24.95
Carbon Fiber Look
GYT-5SL49-28-CF $24.95
10. Sport Tank Bag with Map Pouch
Polyester construction with a neoprene pad for tank
surface protection. Strong magnets hold the bag in
place. Also features a convenient, sealed map pouch on
top of bag. Measures 12" x 9-3/4" x 6".
ABA-2C064-00-00 $59.95
CAUTION: Do not put goods into tank bag that may be sensitive to
magnetic fields (magnetic media, electronic equipment, etc.).
10 11
11. FZ6 Bike Cover
Made from premium, ultra-durable Sur Last ® solutiondyed
polyester fabric. Resists fading, and helps protect
your bike from the elements. Custom tailored for a
precise fit.
Fits all FZ6 models
Black
GYT-5VX28-00-BK $98.95

SPORTBIKE
FJR1300
1 2
FJR 1300 Accessories
3a
3c
3b
3d
SEATS
1. FJR1300 Comfort Seat
A layer of gel built into this seat increases rider and
passenger comfort. A unique carbon fiber weave pattern
used in key areas for extra grip. Retains the stock
height adjustability feature.
Fits ’06~’10 FJR1300 models
ABA-2D221-10-00 $374.95
WINDSHIELDS
2. Touring Windshield
Durable polycarbonate construction. 4" taller and 1/2"
wider than stock for added wind protection. Simply
replaces stock windshield and uses the stock electric
adjustment feature.
Fits ’06~’10 FJR1300 (Shown)
ABA-2D203-10-00 $109.95
Fits ’03~’05 FJR1300
ABA-5JW03-00-00 $104.95
LUGGAGE
3. Touring Trunk
An alternative to saddlebags, this Touring Trunk provides
1.83 cubic feet of space. Features fiberglass-reinforced
double-shell construction. The convenient single lock
mechanism controls a hidden 4-point lid locking system.
Designed to match the saddlebag styling and factory
paint. Requires Rear Trunk Attachment Kit (sold
separately).
Not recommended for use in combination with
saddlebags due to increased risk of overloading the
motorcycle.
NEW! Fits ’10 FJR1300A/ FJR1300AE
Liquid Silver
5JW-W0754-00-01 $439.95
Fits ’09 FJR1300AE
Metallic Titanium
5JW-W0754-91-00 $439.95
Fits ’08~’09 FJR1300A
Raven
5JW-W0754-80-01 $439.95
Fits ’08 FJR1300AE
Granite Gray
5JW-W0754-81-01 $439.95
Fits ‘07 FJR1300A
a. Black Cherry
5JW-W0754-71-01 $439.95
Fits ’06 FJR1300A
b. Cobalt Blue
5JW-W0754-60-01 $439.95
Fits ’06~’07 FJR1300AE & ‘04 FJR1300A
c. Cerulean Silver
5JW-W0754-36-01 $439.95
Fits ’05 FJR1300A
d. Galaxy Blue
5JW-W0754-35-01 $439.95

SPORTBIKE
FJR1300
4. Rear Trunk Attachment Kit
Required for FJR1300 Trunk attachment.
Fits ’06~’10 FJR1300 models
ABA-2D261-30-10 $115.95
Fits ’03~’05 FJR1300 models
ABA-5JW61-30-10 $72.95
5. Rear Trunk Backrest Pad
For added comfort on long trips.
Fits ’03~’10 FJR1300 models
5JW-W0772-00-00 $109.95
4 5
6
6. Sport Tank Bag with Map Pouch
Polyester construction with a neoprene pad for tank
surface protection. Strong magnets hold the bag in
place. Also features a convenient, sealed map pouch on
top of bag. Measures 12" x 9-3/4" x 6".
ABA-2C064-00-00 59.95
CAUTION: Do not put goods into tank bag that may be sensitive to
magnetic fields (magnetic media, electronic equipment, etc.).
FUNCTION & STYLE
7
7. Grip Warmer Kit
For those occasions when the temperatures drop, this
Grip Warmer Kit provides much needed warmth to help
keep rider’s hands comfortable. There is no interference
with operation, thanks to a continuously variable,
battery-saving regulator.
Fits ’06~’10 FJR1300
ABA-2D237-40-00 $419.95
Fits ’03~’05 FJR1300
5JW-W0792-01-00 $319.95
8. Tank Pads
Help protect your gas tank from nicks and abrasions
caused by belt buckles, snaps, or zippers.
Chrome Look
GYT-5SL49-24-CH $29.95
Carbon Fiber Look
GYT-5SL49-24-CF $29.95
9. Fuel Cap Acccents
Add this to your fuel cap for a custom look.
Chrome Look
GYT-5SL49-28-CH $24.95
Carbon Fiber Look
GYT-5SL49-28-CF $24.95
10. FJR1300 Bike Cover
Made from premium, ultra-durable Sur Last ® solutiondyed
polyester fabric. Resists fading, and helps protect
your bike from the elements. Custom tailored for a
precise fit. Includes zippered expansion pocket for
Touring Trunk.
Fits ’06~’10 FJR1300
Black
ABA-2D228-00-BK $143.95
8
9
10

SPORTBIKE
Sportbike Stands
1 2
SPORTBIKE STANDS
1. Front Wheel Stand
Factory race team-inspired design. Durable and easy
to use. Super lightweight construction using 6061-T6
aircraft-quality aluminum. Black bright dip finish. (Must
be used in combination with Rear Wheel Stand.)
Fits all R1 and R6 models
GYR-RACES-FR-BK $174.95
3
2. Rear Wheel Stand
Factory race team-inspired design. Durable and easy
to use. Super lightweight construction using 6061-T6
aircraft-quality aluminum. Black bright dip finish.
(Requires Swingarm Spools.)
Fits all R1 and R6 models
GYR-RACES-RR-BK $174.95
3. Swingarm Spools
One-piece construction with machined Tuning Fork
accent.
Fits all R1, R6, and FZ1 models
Black Anodized
GYT-SPOOL-AL-BK $23.95
Blue Anodized
GYT-SPOOL-AL-BL $23.95
Clear Anodized
GYT-SPOOL-AL-CL $23.95
Red Anodized
GYT-SPOOL-AL-RD $23.95

DISTRIBUTED BY YAMAHA
Sportbike Accessories
Welcome to our new "Distributed by Yamaha" Product Line
Our product team has searched the globe to bring you easy access to the proven best accessories to bolt onto Yamaha Sportbikes.
We've formed an alliance with these exciting companies:
ASV Inventions ®
Russell ® Performance
StompGrip ®
Marchesini
HT Moto
Harris Performance
Products Ltd.
Axio ®
ChatterBox!
Graves Motorsports Akrapovic ®
PIAA ® McCuff ®
Racing Industries, Inc.

DISTRIBUTED BY YAMAHA
Sportbike Accessories
1a
1c
2a
2b
1b
1c
1. NEW! Unbreakable Pivoting Levers
New C/5 Sport Series Levers by ASV Inventions ® . Unbreakable,
with a 5-year guarantee from the manufacturer.
Provides on-the-fly micro-adjustable reach, stainless steel
bushing at pivot, and a chrome-silicon high-tension spring.
CNC-machined from 6061 billet aluminum. Made in U.S.A.
Stealth Black
a. Brake Lever
Fits '04~'10 R1, '05~'10 R6
ABA-0SS56-20-23 $139.95
b. Clutch Lever
Fits '04~'10 R1, '05~'10 R6
ABA-0SS56-20-24 $139.95
Yamaha Blue -Yamaha Exclusive!
c. Brake Lever
Fits '04~'08 R1, '05~'10 R6
ABA-13S55-50-26 $129.95
Fits '06~'10 FZ1, '04~'09 FZ6
ABA-13S55-50-30 $129.95
d. Clutch Lever
Fits '04~'08 R1, '05~'10 R6, '06~'10 FZ1, '04~'09 FZ6
ABA-13S55-50-28 $129.95
2. NEW! Unbreakable Pivoting "Shorty"
Levers
New C/5 Sport Series "Shorty" Levers by ASV Inventions ® .
Unbreakable, with a 5-year guarantee from the manufacturer.
Provides on-the-fly micro-adjustable reach, stainless steel
bushing at pivot, and a chrome-silicon high-tension spring.
CNC-machined from 6061 billet aluminum. Made in U.S.A.
Yamaha Blue -Yamaha Exclusive!
a. Clutch Lever
Fits '04~'08 R1, '05~'10 R6, '06~'10 FZ1, '04~'09 FZ6
ABA-13S55-50-29 $129.95
b. Brake Lever
Fits '04~'10 R1, '05~'10 R6
ABA-13S55-50-27 $129.95
Fits '06~'10 FZ1, '04~'09 FZ6
ABA-13S55-50-31 $129.95

DISTRIBUTED BY YAMAHA
Sportbike Accessories
3. NEW! Russell ® Brake Lines
Russell ® Performance Cycleflex ® Street Brake Hose Kits
incorporate the convenience and reliability of factory assembly
for trouble-free installation, no additional components required.
Our precision double-crimp technology ensures permanent
end attachment and precise alignment for uncompromised
fit. Street brake hose kits are engineered utilizing a Teflon ®
inner liner, supported by a rugged 308 stainless steel
braid. Cycleflex ® street bike brake hose kits duplicate the
routing of factory brake hoses and come complete with all
necessary hardware. The stainless steel braid enhances the
overall appearance and meets all the guidelines for the DOT
MVS-571.106 requirements. 50-state legal.
Front
Fits '03~'04 R6
GYT-0SS55-50-52 $59.95
Fits '01~'05 FZ1
GYT-0SS55-50-57 $79.95
Rear
Fits '04~'05 R1
GYT-0SS55-50-56 $34.95
Fits '02~'03 R1
GYT-0SS55-50-55 $29.95
Fits '06~'10 R6
GYT-0SS55-50-54 $49.95
Fits '03~'05 R6
GYT-0SS55-50-53 $49.95
Fits '06~'10 FZ1
GYT-0SS55-50-59 $29.95
Fits '01~'05 FZ1
GYT-0SS55-50-58 $29.95
4. NEW! Russell ® Front 2-Line Racer Kit
Russell ® Performance Cycleflex ® Two-Hose Racer Kits utilize
a Teflon ® inner liner supported by a stainless steel outer
jacketing to eliminate brake hose expansion for a firm brake
lever time after time. These kits consist of two brake hoses that
connect directly to the master cylinder using a double-length
banjo bolt (supplied), with the longer hose attaching to the left
caliper, shorter to the right caliper. This eliminates the OEM
hose set-up and brake junction, making brake services at the
track simpler while providing excellent brake performance. All
two-hose racer kits come with extruded clear coat to protect
against abrasion of painted surfaces. 50-state street legal.
Fits '04~'08 R1
GYT-0SS55-50-63 $79.95
Fits '98~'03 R1
GYT-0SS55-50-64 $69.95
Fits '08~'10 R6
ABA-0SS56-20-95 $79.95
Fits '06~'07 R6
GYT-0SS55-50-60 $89.95
Fits '05 R6
GYT-0SS55-50-61 $89.95
Fits '06~'10 FZ1
GYT-0SS55-50-62 $74.95
3
4

DISTRIBUTED BY YAMAHA
Sportbike Accessories
1
1. NEW! StompGrip Traction Pads
These tank and side cover traction pads are made of a
clear, pliable elastomer material molded to shape with
"traction knobbies" that provide functional, non-abrasive
grip. These kits come pre-molded for the tank and side
cover of your R1 or R6. These traction pads make
gripping your bike incredibly easy.
Fits '09~'10 R1
ABA-0SS56-21-80 $48.95
Fits '07~'08 R1
ABA-13S55-10-07 $44.95
Fits '04~'06 R1
ABA-13S55-10-06 $44.95
Fits '06~'07 R6
ABA-13S55-10-05 $44.95
Fits '03~'05 R6
ABA-13S55-10-04 $44.95
Fits '06~'09 FZ1
ABA-0SS56-21-79 $48.95
Marchesini Wheels
These Marchesini wheels are manufactured by plastic deformation aluminum alloy forging. They provide a high lateral and torsional
resistance plus a good weight reduction compared to stock wheels. Particularly suitable for track and street use.
2a
3a
2b
3b
2. NEW! H-Spoke Wheel
a. Front
Race Team Replica – A Yamaha Exclusive!
Black
Fits '04~'10 R1, '03~'10 R6
ABA-0SS56-21-47 $969.95
b. Rear
Race Team Replica – A Yamaha Exclusive!
Black
Fits '04~'10 R1
ABA-0SS56-21-51 $1,574.99
Fits '03~'10 R6
ABA-0SS56-21-49 $1,574.99
3. NEW! T-Spoke Wheel
a. Front
Silver (Shown)
Fits '04~'10 R1, '03~'10 R6
ABA-0SS56-21-48 $969.95
Gold
Fits '04~'10 R1, '03~'10 R6
ABA-0SS56-21-55 $969.95
b. Rear
Silver (Shown)
Fits '04~'10 R1
ABA-0SS56-21-52 $1,574.99
Fits '03~'10 R6
ABA-0SS56-21-50 $1,574.99
Gold
Fits '04~'10 R1
ABA-0SS56-21-53 $1,574.99
Fits '03~'10 R6
ABA-0SS56-21-54 $1,574.99

DISTRIBUTED BY YAMAHA
Sportbike Accessories
HT MOTO
These quality seat covers are made from marine-grade vinyl. Double-stitched seams add strength. Seat covers are precision-cut to
fit your Yamaha R1 or R6 sportbike. Covers are easy to install and maintain. Includes both rider and passenger seat covers.
NEW! R1 Sportbike Seat Covers
a. Black Carbon Fiber-Look Top/Blue
Inlay
Vinyl seat cover top is black with a carbon fiber-looking
weave pattern with blue inlay.
Fits '09~'10 R1
ABA-0SS56-21-07 $69.95
b. Blue Top/Black Carbon Fiber-Look
Inlay
Vinyl seat cover top is blue with black carbon fiber-looking
weave pattern inlay.
Fits '09~'10 R1
ABA-0SS56-21-08 $69.95
c. Black Carbon Fiber-Look Top/White
Inlay with Red Contrast Stitching
Vinyl seat cover top is black with a carbon fiber-looking
weave pattern with white inlay and red contrast stitching.
Fits '09~'10 R1
ABA-0SS56-21-09 $69.95
d. Black Carbon Fiber-Look Top/Red
Inlay
Vinyl seat cover top is black with a carbon fiber-looking
weave pattern with red inlay.
Fits '09~'10 R1
ABA-0SS56-21-10 $69.95
e. Black Top/Black Carbon Fiber-Look
Inlay with Red Contrast Stitching
Vinyl seat cover top is black with black carbon fiber-looking
weave pattern inlay and red contrast stitching.
Fits '09~'10 R1
ABA-0SS56-21-11 $69.95
f. Red Carbon Fiber-Look Top/Black
Inlay
Vinyl seat cover top is red with a carbon fiber-looking weave
pattern with black inlay.
Fits '09~'10 R1
ABA-0SS56-21-12 $69.95
g. Yellow Top/Black Inlay
Vinyl seat cover top is yellow with black inlay.
Fits '09~'10 R1
ABA-0SS56-21-13 $69.95
a
b
c
d
e
f
g

DISTRIBUTED BY YAMAHA
Sportbike Accessories
h
i
j
k
l
m
n
o
h. Black Carbon Fiber-Look Top/Yellow
Inlay
Vinyl seat cover top is black with a carbon fiber-looking
weave pattern with yellow inlay.
Fits '09~'10 R1
ABA-0SS56-21-14 $69.95
i. Black Carbon Fiber-Look Top/Black
Inlay with Yellow Contrast Stitching
Vinyl seat cover top is black with a carbon fiber-looking
weave pattern with black inlay and yellow contrast stitching.
Fits '09~'10 R1
ABA-0SS56-21-15 $69.95
j. Black Top/ Silver Carbon Fiber-Look
Inlay
Vinyl seat cover top is black with silver carbon fiber-looking
weave pattern inlay.
Fits '09~'10 R1
ABA-0SS56-21-16 $69.95
k. Black Top/ Black Carbon Fiber-Look
Inlay with Blue Contrast Stitching
Vinyl seat cover top is black with black carbon fiberlooking
weave pattern inlay and blue contrast stitching.
Fits '09~'10 R1
ABA-0SS56-21-17 $69.95
l. Copper Carbon Fiber-Look Top/Black
Inlay
Vinyl seat cover top is copper with a carbon fiberlooking
weave pattern with black inlay.
Fits '07~'08 R1
ABA-0SS56-21-37 $69.95
m. Black Carbon Fiber-Look Top/Black
Inlay with Yellow Contrast Stitching
Vinyl seat cover top is black with a carbon fiber-looking
weave pattern with black inlay and yellow contrast
stitching.
Fits '07~'08 R1
ABA-0SS56-21-28 $69.95
n. Black Top/Black Carbon Fiber-Look
Inlay with Blue Contrast Stitching
Vinyl seat cover top is black with black carbon fiberlooking
weave pattern inlay and blue contrast stitching.
Fits '07~'08 R1
ABA-0SS56-21-29 $69.95
o. Blue Top/Black Carbon Fiber-Look Inlay
Vinyl seat cover top is blue with black carbon fiberlooking
weave pattern inlay.
Fits '07~'08 R1
ABA-0SS56-21-30 $69.95

DISTRIBUTED BY YAMAHA
Sportbike Accessories
p. Black Carbon Fiber-Look Top/Blue Inlay
Vinyl seat cover top is black with a carbon fiber-looking
weave pattern with blue inlay.
Fits '07~'08 R1
ABA-0SS56-21-31 $69.95
q. Black Carbon Fiber-Look Top/White
Inlay with Red Contrast Stitching
Vinyl seat cover top is black with a carbon fiberlooking
weave pattern with white inlay and red contrast
stitching.
Fits '07~'08 R1
ABA-0SS56-21-32 $69.95
r. Black Carbon Fiber-Look Top/Red Inlay
Vinyl seat cover top is black with a carbon fiber-looking
weave pattern with red inlay.
Fits '07~'08 R1
ABA-0SS56-21-33 $69.95
s. Black Carbon Fiber-Look Top/Black
Inlay with Red Contrast Stitching
Vinyl seat cover top is black with a carbon fiberlooking
weave pattern with black inlay and red contrast
stitching.
Fits '07~'08 R1
ABA-0SS56-21-34 $69.95
t. Red Carbon Fiber-Look Top/Black Inlay
Vinyl seat cover top is red with a carbon fiber-looking
weave pattern with black inlay.
Fits '07~'08 R1
ABA-0SS56-21-35 $69.95
u. Black Carbon Fiber-Look Top/Yellow
Inlay
Vinyl seat cover top is black with a carbon fiber-looking
weave pattern with yellow inlay.
Fits '07~'08 R1
ABA-0SS56-21-36 $69.95
p
q
r
s
t
u

DISTRIBUTED BY YAMAHA
Sportbike Accessories
a
b
c
d
e
f
g
h
NEW! R6 Sportbike Seat Covers
a. Black Carbon Fiber-Look Top/Black
Inlay with Yellow Contrast Stitching
Vinyl seat cover top is black with a carbon fiber-looking
weave pattern with black inlay and yellow contrast stitching.
Fits '08~'10 R6
ABA-0SS56-21-18 $69.95
b. Black Carbon Fiber-Look Top/Black
Inlay with Blue Contrast Stitching
Vinyl seat cover top is black with a carbon fiber-looking
weave pattern with black inlay and blue contrast stitching.
Fits '08~'10 R6
ABA-0SS56-21-19 $69.95
c. Blue Top/Black Carbon Fiber-Look Inlay
Vinyl seat cover top is blue with black carbon fiberlooking
weave pattern inlay.
Fits '08~'10 R6
ABA-0SS56-21-20 $69.95
d. Black Carbon Fiber-Look Top/Blue Inlay
Vinyl seat cover top is black with a carbon fiber-looking
weave pattern with blue inlay.
Fits '08~'10 R6
ABA-0SS56-21-21 $69.95
e. Black Carbon Fiber-Look Top/Orange
Inlay
Vinyl seat cover top is black with a carbon fiber-looking
weave pattern with orange inlay.
Fits '08~'10 R6
ABA-0SS56-21-22 $69.95
f. Black Carbon Fiber-Look Top/White
Inlay with Red Contrast Stitching
Vinyl seat cover top is black with a carbon fiber-looking
weave pattern with white inlay and red contrast stitching.
Fits '08~'10 R6
ABA-0SS56-21-23 $69.95
g. Black Carbon Fiber-Look Top/Red Inlay
Vinyl seat cover top is black with a carbon fiber-looking
weave pattern with red inlay.
Fits '08~'10 R6
ABA-0SS56-21-24 $69.95
h. Black Top/Black Carbon Fiber-Look
Inlay with Red Contrast Stitching
Vinyl seat cover top is black with black carbon fiberlooking
weave pattern inlay and red contrast stitching.
Fits '08~'10 R6
ABA-0SS56-21-25 $69.95

DISTRIBUTED BY YAMAHA
Sportbike Accessories
i. Red Carbon Fiber-Look Top/Black Inlay
Vinyl seat cover top is red with a carbon fiber-looking
weave pattern with black inlay.
Fits '08~'10 R6
ABA-0SS56-21-26 $69.95
j. Copper Carbon Fiber-Look Top/Black
Inlay
Vinyl seat cover top is copper with a carbon fiberlooking
weave pattern with black inlay.
Fits '08~'10 R6
ABA-0SS56-21-27 $69.95
i
j
1
1. NEW! Harris Adjustable Rear Sets
These "factory style" footrest kits were developed on the
race track by Harris Performance Products Ltd. These are
the racer's choice and are fitted to many of the world's
leading race bikes. Kits are CNC-machined from solid 6082
T6 billet aluminum. Standard shift pattern is the same as
the road version. Levers run on self-lubricating bearings
and the lever position is adjustable on rod-end spherical
bearings. Footpeg position is variable back and/or up from
standard by means of a matrix.
Aluminum
a. Fits '09~'10 R1
(Shown)
ABA-0SS56-20-94 $699.95
Fits '07~'08 R1
GYT-14B55-50-20 $649.95
b. Fits '08~'10 R6
ABA-62B55-50-19 $649.95
2. NEW! Harris "MotoGP ® Style"
Slip-On Silencer
Developed by Harris Performance Products Ltd., this
lightweight, direct replacement silencer for the R6 is
designed to replicate the sharp and aggressive look of
current MotoGP ® bikes. Get that race track look and
sound without compromising reliability or performance.
Handcrafted from stainless steel and left as manufactured
for that authentic "works" look. No engine modifications
necessary, comes with all fittings and instructions.
For closed-course competition only (see Important Note below).
Fits '08~'10 R6
ABA-62B55-50-21 $274.95
2
IMPORTANT NOTE:
All street motorcycle models are regulated by the epa and
state law. this accessory affects exhaust emissions and
is for closed-course competition only. Use on public roads
constitutes illegal tampering punishable by law.

DISTRIBUTED BY YAMAHA
Sportbike Accessories
1
1. NEW! Harris Clutch Protector
Developed by Harris Performance Products Ltd., these
top-quality, machined nylon clutch protectors greatly
reduce the risk of expensive engine damage. Includes
stainless steel and aluminum fasteners and brackets.
Fits '07~'08 R1
GYT-14B55-50-24 $84.95
Fits '08~'10 R6
ABA-62B55-50-22 $84.95
2
3a
3b
4
2. NEW! Harris Spindle Protector
Developed by Harris Performance Products Ltd., this
front spindle protector greatly aids in reducing the risk of
expensive front end damage in the event of a fall or tip over.
Fits '07~'10 R1
GYT-14B55-50-25 $84.95
Fits '08~'10 R6
ABA-62B55-50-23 $84.95
3. NEW! Harris Road Race Pivoting
Levers
Developed by Harris Performance Products Ltd., from
their direct involvement in racing, these levers are
designed to flip up in the event of a fall, thus reducing
the chance of a lever breaking. Equipped with an
adjuster knob to facilitate span adjustment to enhance
rider comfort and lever performance. Manufactured
from the highest quality materials. Direct replacement
for the standard equipment.
a. Pivoting Brake Lever
Black
Fits '04~'10 R1, '05~'10 R6
GYT-0SS55-50-72 $149.95
b. Pivoting Clutch Lever
Black
Fits '04~'10 R1, '99~'10 R6, '06~'10 FZ1, '04~'09 FZ6
GYT-0SS55-50-73 $149.95
4. NEW! Harris Front Wheel Stand
Developed by Harris Performance Products Ltd., this
front paddock stand locates under each fork leg and
facilitates all front-end work including wheel cleaning
and removal. Main tubes are satin-finished stainless
steel with mild steel zinc-plated swing plates with
PVC anti-scuff sleeves. Two high-load wheels are
incorporated into the design. A universal stand, the
under fork leg probes swing into the correct position
for any fork application. This one-piece welded structure
comes with all necessary fixtures, fasteners and fitting
for immediate use.
Fits R1 and R6 models
GYT-0SS55-50-65 $159.95

DISTRIBUTED BY YAMAHA
Sportbike Accessories
5. NEW! Harris Front Wheel Stand
(with Headstock)
Developed by Harris Performance Products Ltd., this
is the ultimate stand for maintenance, especially when
you need to remove the front wheel or forks. Features
a CNC-machined knuckle for greater rigidity plus an
under-yoke adaptor kit. Made from high-quality stainless
steel tubing, the stand provides a secure platform for
your motorcycle. The supplied yoke pin locates in the
yoke stem of your R1 or R6 when the stand is in use.
Fits '03~'08 R1, '03~'10 R6
GYT-0SS55-50-67 $349.95
6. NEW! Harris Rear Wheel Stand
Developed by Harris Performance Products Ltd., this
"roll on" rear stand is fabricated as a one-piece unit using
stainless steel tubing and high-load nylon wheels. The
mild steel fabricated cups are coated to help protect the
swingarm from friction damage when the stand is used, and
are adjustable to accommodate different widths. (Requires
Swingarm Spools, sold separately.)
Fits all R1 and R6 models
GYT-0SS55-50-66 $159.95
5
6
7. NEW! Axio ® Tank Bag
Polycarbonate, hardshell tank bag by Axio ® . Tank bag attaches
to head bolt on tank as well as with strong magnets
that wrap underneath the tank.
Fits '07~'08 R1, '08~'10 R6
Carbon Fiber Look
GYT-14B55-50-44 $189.95
NOTICE:
Do not put goods into tank bag that may be sensitive to magnetic
fields (magnetic media, electronic equipment, etc.).
8. NEW! Axio ® Tail Bag
Polycarbonate, hardshell tail bag by Axio ® . Tail bag attaches
directly to passenger seat or rear cowl using a clear plastic
strap in the rear and two hook-and-loop straps in the front.
Includes a reflective panel in the rear and doubles as a rider
backrest
Fits '07~'08 R1, '08~'10 R6
Carbon Fiber Look
GYT-14B55-50-45 $149.95
7
8

DISTRIBUTED BY YAMAHA
Sportbike Accessories
1a
1b
1c
1. ChatterBox! Bluetooth ® Intercom
Helmet Headsets
XBi
Communicate rider to passenger via CDMA crystal-clear
technology, using either voice activation or push-to-talk. Both
rider and passenger module is capable of pairing with up to
two accessory devices at the same time (i.e. iPod ® , MP3,
satellite radio, GPS, cell phone, radar detector), SMART
technology will automatically prioritize the transmission
of the paired devices. The XBi is so far advanced that it
can even stream music from one module to the other.
Each module is also capable of being used by itself to pair
accessories when riding alone. Other features include a
lithium-polymer rechargeable battery with 6 to 8 true hours
of power, 1-hour express charge, noise suppression, Hi-Fi
headset, and a compact aerodynamic module design. Each
kit sold includes module, battery, wall charger, headset, and
mounting hardware.
a. Open-Face XBi Helmet Kit
GYT-0SS56-20-16 $184.95
b. Full-Face XBi Helmet Kit
GYT-0SS56-20-18 $184.95
XBi2
The XBi2 wireless intercom comes equipped with A2DP
Bluetooth ® technology. All the same features as the
XBi but with additional power that allows simultaneous
communication between three riders with up to a 1640-foot
(500-meter) range in optimum conditions. Stream audio
signal from any source that already comes equipped with
Bluetooth ® , such as cell phones, MP3, GPS, or iPod ® /
iPhone ® when hooked up to a Bluetooth ® adapter such as
the iCombi Bluetooth ® Dongle Adapter. XBi2 will allow up to
6 to 8 hours of true talk time and 48 hours of standby time
on one charge.
a. Open-Face XBi2 Helmet Kit
GYT-0SS58-40-21 $229.95
b. Full-Face XBi2 Helmet Kit
GYT-0SS58-40-20 $229.95
c. iCombi Bluetooth ® Dongle Adapter
Uses Bluetooth ® 2.0 (A2DP/AVRCP) technology to
wirelessly stream your stereo music from any MP3
player, satellite radio, navigation or other audio device
that has a standard 3.5mm headset jack. It has an
internal rechargeable battery that last up to 6 to 8
hours. Has a wireless range of up to 30 feet. Includes
USB cable for charging from any computer.
Silver (Shown here in black)
GYT-0SS56-20-17 $59.95

DISTRIBUTED BY YAMAHA
Sportbike Accessories
2. NEW! Graves Motorsports Full
"Low Mount" Exhaust System
For the rider that is looking for something a little different,
the stainless steel Low Mount Drag exhaust. This system
features mandrel bent stainless tubing, billet aluminum
flanges, and our full carbon fiber side exit silencer. It is
extremely light yet offers the amazing horsepower increases
Graves is known for. An O 2
bung (with plug) is provided for
use with the stock Yamaha O 2
Sensor or the Dynojet ® Auto
Tune module which allows for live, closed-loop EFI tuning.
"Everlast" packing produces an exhaust note like no other and
holds up longer to the extreme conditions of a high-revving
motorcycle. This full exhaust system delivers exactly what this
revolutionary R1 deserves: big power, lasting durability, style,
and sound. System gives an overall weight savings of 15 lb.
compared to stock exhaust system.
For closed-course competition only (see Notice below).
Fits '09~'10 R1
Full Stainless Steel/ Carbon Fiber
ABA-0SS56-20-88 $1,499.95
2
3. NEW! Graves Motorsports Full
Exhaust Systems
The Graves Full Exhaust Systems offer class-leading
performance. All systems offer significant weight savings
compared to stock. Systems reduce engine operating
temperature. These systems have a race bike type appearance
and are designed for serious racers and track day enthusiasts.
For closed-course competition only (see Notice below).
Fits '09~'10 R1
a. Stainless Steel/ Carbon Fiber
ABA-0SS56-20-86 $1,994.95
Fits '07~'08 R1
Stainless Steel/ Titanium
ABA-0SS56-20-65 $1,623.95
Fits '07~'08 R1
Titanium/ Titanium
ABA-0SS56-20-66 $2,269.95
Fits '07~'08 R1
Stainless Steel/ Carbon Fiber
ABA-0SS56-20-79 $1,623.95
Fits '07~'08 R1
Titanium/ Carbon Fiber
ABA-0SS56-20-80 $2,269.95
Fits '04~'06 R1
Stainless Steel/ Titanium
ABA-0SS56-20-73 $1,569.95
Fits '04~'06 R1
Stainless Steel/ Carbon Fiber
ABA-0SS56-20-74 $1,569.95
Fits '04~'06 R1
Titanium/ Titanium
ABA-0SS56-20-75 $2,034.95
Fits '04~'06 R1
Titanium/ Carbon Fiber
ABA-0SS56-20-76 $2,034.95
Fits '06~'10 FZ1
b. Stainless Steel/ Carbon Fiber
ABA-0SS56-21-05 $1,449.95
Fits '06~'10 FZ1
Stainless Steel/ Titanium
ABA-0SS56-21-06 $1,449.95
3a
3b
NOTICE:
Graves Motorsports products are intended for racing motorcycles only
and are not applicable for use on pollution-controlled street/highway
vehicles. Graves Motorsports products are sold for show or closedcourse
competition only.

DISTRIBUTED BY YAMAHA
Sportbike Accessories
1a
1b
1. NEW! Graves Motorsports "Race
Spec" Exhaust Systems for R6
Graves Motorsports hand-made-in-the-U.S.A. full exhaust
systems for the Yamaha YZF-R6. This high performance
exhaust system features head pipes, billet aluminum
flanges, and silencer. O 2
bung is provided for use with the
Yamaha O 2
Sensor. The "Race Spec" full exhaust system
includes an added cross-over head pipe feature along with
a more aggressive head pipe taper. These features allow
for an increased throttle response and low-to-mid range
power delivery without affecting the peak power output. The
exhaust system's cores are altered in size and taper length
specifically for the R6. By doing so Graves can maximize
the performance of the exhaust system.
For closed-course competition only (see Notice below).
Fits '06~'10 R6
Titanium/ Titanium
ABA-0SS56-20-62 $1,765.95
Fits '06~'10 R6
Titanium/ Carbon Fiber
ABA-0SS56-20-63 $1,765.95
Fits '06~'10 R6
a. Stainless Steel/ Carbon Fiber
ABA-0SS56-20-61 $1,499.95
Fits '06~'10 R6
b. Stainless Steel/ Titanium
ABA-0SS56-20-60 $1,499.95
NOTICE:
Graves Motorsports products are intended for racing motorcycles only and are not applicable for use on pollutioncontrolled
street/highway vehicles. Graves Motorsports products are sold for show or closed-course competition only.

DISTRIBUTED BY YAMAHA
Sportbike Accessories
2. NEW! Graves Motorsports Cat.
Eliminator Exhaust System
The Graves Motorsports Cat. Eliminator exhaust system is
a perfect mix of form and function. Eliminating the catalytic
converter from the stock exhaust removes significant
weight, reduces stored up exhaust heat, and increases
the flow of exhaust gases. When all of these factors are
combined it equals POWER. It features mandrel-bent tubing
and silencers with tapered conical outlets. An O 2
bung (with
plug) is provided for use with the stock Yamaha O 2
sensor.
"Everlast" packing produces an exhaust note like no other
and holds up longer to the extreme conditions of a highrevving
motorcycle.
For closed-course competition only (see Notice below).
Fits '09~'10 R1
a. Stainless Steel/ Carbon Fiber
ABA-0SS56-20-92 $1,576.95
Fits '09~'10 R1
Titanium/ Carbon Fiber
ABA-0SS56-20-97 $1,854.95
Fits '07~'08 R1
Titanium/ Titanium
ABA-0SS56-20-85 $1,629.95
Fits '07~'08 R1
Titanium/ Carbon Fiber
ABA-0SS56-20-84 $1,629.95
Fits '07~'08 R1
Stainless Steel/ Carbon Fiber
ABA-0SS56-20-82 $1,399.95
Fits '07~'08 R1
Stainless Steel/ Titanium
ABA-0SS56-20-83 $1,399.95
Fits '04~'06 R1
Stainless Steel/ Carbon Fiber
ABA-0SS56-20-77 $1,299.95
Fits '04~'06 R1
Stainless Steel/ Titanium
ABA-0SS56-20-78 $1,299.95
Fits '06~'09 R6S
Stainless Steel/ Carbon Fiber
ABA-0SS56-21-01 $699.95
Fits '06~'09 R6S
Stainless Steel/ Titanium
ABA-0SS56-21-02 $699.95
Fits '06~'10 FZ1
Stainless Steel/ Carbon Fiber
ABA-0SS56-21-03 $649.95
Fits '06~'10 FZ1 (Shown)
b. Stainless Steel/ Titanium
ABA-0SS56-21-04 $649.95
2a
2b

DISTRIBUTED BY YAMAHA
Sportbike Accessories
1a
1b
2
1. NEW! Graves Motorsports "Cat.
Back" Slip-On Exhaust System
The Graves Motorsports "Cat. Back" Slip-On Exhaust
system is handcrafted here in the U.S.A. The exhaust
system features mandrel-bent tubing and silencers with
tapered conical end caps. Systems offer a weight reduction
compared to stock exhaust systems.
For closed-course competition only (see Notice below).
Fits '09~'10 R1
a. Stainless Steel/ Carbon Fiber
ABA-0SS56-20-90 $1,328.95
Fits '07~'08 R1
b. Stainless Steel/ Titanium
ABA-0SS56-20-67 $1,049.95
Fits '07~'08 R1
Stainless Steel/ Carbon Fiber
ABA-0SS56-20-81 $1,049.95
2. Graves Motorsports Carbon Fiber
Slip-On Exhaust
Graves Motorsports handmade-in-the-U.S.A. carbon fiber
slip-on silencer for the Yamaha YZF-R6. Retains the original
equipment muffler under the bike. System gives an overall
weight savings of 1 lb. compared to stock exhaust system.
For closed-course competition only (see Notice below).
Fits '06~'10 R6
Carbon Fiber
ABA-0SS56-21-00 $499.95
3. NEW! Graves Motorsports Slip-On
Megaphone Exhaust System
Graves all new handmade-in-the-U.S.A. slip-on exhaust
system for the Yamaha YZF-R6. Retains the original
equipment muffler under the bike. This exhaust system
features meticulous welds, laser-engraved Graves
Motorsports logo, and a MotoGP ® inspired reverse cone
megaphone design.
For closed-course competition only (see Notice below).
Fits '06~'10 R6
ABA-0SS56-20-64 $199.95
3
NOTICE:
Graves Motorsports products are intended for racing motorcycles only and are not applicable for use on pollutioncontrolled
street/highway vehicles. Graves Motorsports products are sold for show or closed-course competition only.

DISTRIBUTED BY YAMAHA
Sportbike Accessories
4. NEW! Graves Motorsports Frame
Sliders
Frame sliders are designed to help protect frame
and bodywork in the event of a low-side fall. Do not
require any bodywork modification to install. Includes all
mounting hardware. (Set of two.)
a. Black
Fits '06 R1/ R1 LE
ABA-0SS56-20-34 $69.95
Fits '04~'05 R1
ABA-0SS56-20-32 $69.95
Fits '02~'03 R1
ABA-0SS56-20-27 $69.95
Fits '06~'07 R6
ABA-0SS56-20-39 $109.95
Fits '03~'05 R6, '06~'08 R6S
ABA-0SS56-20-37 $69.95
Fits '06~'10 FZ1
ABA-0SS56-20-44 $69.95
b. White
Fits '04~'05 R1
ABA-0SS56-20-30 $69.95
Fits '02~'03 R1
ABA-0SS56-20-29 $69.95
c. Black Aluminum
Fits '06~'10 FZ1
ABA-0SS56-20-43 $69.95
d. Aluminum
Fits '06~'10 FZ1
ABA-0SS56-20-42 $69.95
4a
4b
4c
4d

DISTRIBUTED BY YAMAHA
Sportbike Accessories
1
2
3a
3b
1. NEW! Graves Motorsports Long
Puck Frame Sliders
Frame sliders are designed to help protect frame and
bodywork on a low-side fall. Do not require any bodywork
modification to install. Includes all mounting hardware.
(Set of two.)
Black
Fits '07~'08 R1
ABA-0SS56-20-36 $129.95
Fits '06 R1
ABA-0SS56-20-35 $79.95
Fits '04~'05 R1
ABA-0SS56-20-33 $79.95
Fits '02~'03 R1
ABA-0SS56-20-28 $79.95
Fits '08~'10 R6 (Shown)
ABA-0SS56-20-41 $114.95
Fits '06~'07 R6
ABA-0SS56-20-40 $114.95
Fits '03~'05 R6, '06~'08 R6S
ABA-0SS56-20-38 $79.95
Fits '06~'10 FZ1
ABA-0SS56-20-45 $79.95
2. NEW! Graves Motorsports Clutch
Sliders
Fits '07~'08 R1
ABA-0SS56-20-46 $99.95
Fits '06~'10 R6 (Shown)
ABA-0SS56-20-47 $99.95
Fits '98~'06 R1, '99~'05 R6
ABA-0SS56-20-48 $69.95
3. NEW! Graves Motorsports Right
Engine Covers
Graves Motorsports CNC-machined billet aluminum
engine cover. Lasered "Graves" logo. Adds protection
and style to your bike.
a. Black
Fits '09~'10 R1*
ABA-0SS56-20-53 $134.95
b. Raw Finish
Fits '06~'10 R6*
ABA-0SS56-20-51 $134.95
*NOTE: OE gasket required for installation. For R1 application, use
14B-15456-00-00. For R6 application, use 2C0-15456-01-00.

DISTRIBUTED BY YAMAHA
Sportbike Accessories
4. NEW! Graves Motorsports Left
Engine Covers
Graves Motorsports CNC-machined billet aluminum
engine cover. Lasered "Graves" logo. Adds protection
and style to your bike.
a. Black
Fits '09~'10 R1*
ABA-0SS56-20-52 $249.95
b. Raw
Fits '07~'08 R1*
ABA-0SS56-20-49 $74.95
c. Silver
Fits '06~'10 R6*
ABA-0SS56-20-50 $249.95
4a
4b
5. NEW! Graves Motorsports Bar Ends
These billet aluminum bar ends are designed to fit the
stock handlebars for the Yamaha Sportbike models
listed below. Sold in pairs.
Aluminum
a. Fits '04~'10 R1, '06~'10 R6, '06~'08 R6S
ABA-0SS56-20-54 $39.95
b. Fits '06~'10 FZ1
ABA-0SS56-20-56 $39.95
Black
c. Fits '04~'10 R1, '06~'10 R6, '06~'08 R6S
ABA-0SS56-20-55 $39.95
d. Fits '06~'10 FZ1
ABA-0SS56-20-57 $39.95
4c
5a
5b 5c 5d

DISTRIBUTED BY YAMAHA
Sportbike Accessories
1
2a
2b
1. NEW! Graves Motorsports
Adjustable Rear Sets
These rear sets feature billet aluminum construction, M1
footpegs, double roller bearings in the brake and shifter
pivots, and left-side carbon fiber heel guard. Includes shift
rod and shift knuckle. Our unique adjustable M1 footpeg
offers superior grip via the large CNC-machined "teeth"
and comfort due to its large contact patch and ability to be
rotated to any desired angle. The lever tips are collapsible
and feature a high-grip rubber cover ensuring positive grip
and feel when shifting and braking. The carbon fiber heel
guard is designed to be functional as well as look great. The
right side is an optional upgrade (purchased separately).
The sturdy, lightweight construction ensures it will last when
digging your heels into them. Rider can select from either
reverse or standard shift pattern by rotating the stock shift
knuckle on the shift shaft. In order to use a Dynojet ® Speed
Shifter you will need to use the Dynojet ® Ignition Module
along with the Power Commander ® PC3USB. If you are using
reverse shift, you will need to order the Shift Rod Tension
Sensor (Pull Type) and 246mm Shift Rod. If you are using
standard shift, you will need to order the Shift Rod Tension
Sensor (Push Type) and 246mm Shift Rod. See your Yamaha
dealer or go to gravesport.com for optional equipment.
Fits '09 R1
ABA-0SS56-20-59 $749.95
Fits '07~'08 R1 (Shown)
ABA-0SS56-20-58 $749.95
2. NEW! Graves Motorsports Velocity
Stacks
The Graves Motorsports Velocity Stack Kit is specially
designed to suit the fuel-injected Yamaha motor.
a. R1/ FZ1 Application
The kit of four injection molded plastic intake stacks
mount directly into the stock airbox without modification
and are designed to smooth out the power curve,
increase horsepower throughout, and improve fuel
efficiency. Power gains of 4 hp in the mid range and 2
hp at the top end are to be expected.
For closed-course competition only (see Notice below).
Fits '04~'06 R1, '06~'10 FZ1
ABA-0SS56-20-71 $149.95
The kit of two rubber intake stacks replaces the stock
intake stacks on the #2 and #3 cylinders. These new
intake stacks mount directly into the stock airbox
without modification and are designed to smooth out
the power curve, increase horsepower throughout, and
improve fuel efficiency. Power gains of up to 6 hp in the
mid range and 2 hp at the top end are not uncommon.
For closed-course competition only (see Notice below).
Fits '02~'03 R1
ABA-0SS56-20-68 $99.95
b. R6 Application
The kit of four billet aluminum intake stacks mount
directly into the stock airbox without modification and
are designed to smooth out the power curve, increase
horsepower throughout, and improve fuel efficiency.
For closed-course competition only (see Notice below).
Fits '03~'04 R6
ABA-0SS56-20-72 $99.95

DISTRIBUTED BY YAMAHA
Sportbike Accessories
3. NEW! Graves Motorsports Smog
Block-Off Plugs/ Plates
Removes the air injection system A.I.S. from your bike for
closed-course competition.
a. Smog Block-Off Plates
Designed to seal off the ports on the valve cover used by
the air injection system. Once these are capped off, the air
injection system can be safely removed. These Smog Block-
Off Plates are made from CNC-machined billet aluminum and
feature the Graves Motorsports "G" logo.
For closed-course competition only (see Notice below).
Fits '04~'10 R1, '03~'10 R6
ABA-0SS56-20-70 $36.95
b. Smog Block-Off Plugs
Designed to seal off the ports on the cylinder head used
by the air injection system (a.k.a smog pumps or A.I.S.).
Once these are capped off, the air injection system can be
safely removed. These Smog Block-Off Plugs are made from
machined aluminum. Set of four.
For closed-course competition only (see Notice below).
Fits '98~'03 R1
ABA-0SS56-20-69 $24.95
3a
3b
NOTICE:
Graves Motorsports products are intended for racing motorcycles only and are not applicable for use on pollutioncontrolled
street/highway vehicles. Graves Motorsports products are sold for show or closed-course competition only.

DISTRIBUTED BY YAMAHA
Sportbike Accessories
1
2
1. NEW! Complete EVO Exhaust Systems
This is the flagship of the Akrapovic ® "Evolution" Exhaust
System line-up, used and tested by top factory teams in
Motorsports racing. It is simply the finest exhaust system
available. Each model is unique and dedicated to maximizing
the performance of an engine, while reducing overall weight
for optimized handling of the whole motorcycle. Systems
feature the Akrapovic ® / Yamaha Racing badge on muffler can.
For closed-course competition only (see Important Note below).
Fits '09~'10 R1
Carbon Fiber Can/ Carbon Fiber End Cap/ Titanium Headers
with Crossover Tubes
ABA-0SS56-21-63 $3,449.95
Fits '09~'10 R1
Titanium Can/ End Cap/ Headers with Crossover Tubes
ABA-0SS56-21-64 $3,449.95
Fits '09~'10 R1 (Shown)
Carbon Fiber Can/ Carbon Fiber End Cap/ Titanium Headers
Replica of Yamaha World Superbike Racer Ben Spies Exhaust
System!
ABA-0SS56-21-61 $3,299.95
Titanium Can/ End Cap/ Headers
ABA-0SS56-21-62 $3,299.95
Fits '08~'10 R6
Titanium Can/ End Cap/ Headers with Crossover Tubes
ABA-0SS56-21-58 $2,569.95
3
2. Complete Race Exhaust Systems
This is a complete high-quality exhaust system made
from conical tubes with precision handcrafting and
attention to detail. Its unique design enables it to obtain
the maximum output from the R6, while significantly
reducing overall weight for top performance. Identical to
the Akrapovic ® top range Evolution Line exhaust system,
the only difference is the materials used.
For closed-course competition only (see Important Note below).
Fits '08~'10 R6
Carbon Fiber/ Carbon Fiber End Cap/ Stainless Steel
Headers
ABA-0SS56-21-57 $1,595.95
Titanium Can/ Carbon Fiber End Cap/ Stainless Steel
Headers (Shown)
ABA-0SS56-21-59 $1,595.95
3. NEW! Akrapovic ® Slip-On Exhaust
System
The Akrapovic ® slip-on represents the first step in
exhaust system tuning. It is simple to install and
replaces a stock muffler. It is also the best compromise
between price and performance. The Slip-on Exhaust
System you will get you more power, more torque, and
less weight which all reflects in a smoother ride.
For closed-course competition only (see Important Note below).
Fits ‘09~’10 R1
Carbon Fiber Can / Carbon Fiber End Cap
ABA-0SS56-21-60 $1,595.95

DISTRIBUTED BY YAMAHA
Sportbike Accessories
High Power Halogen
Xtreme White Plus/
Super Plasma GT-X
Star White
4
5
PIAA ® Powersports Replacement
Headlight Bulbs
Durable, dependable and reliable, PIAA ® Powersports Anti-
Vibration bulbs are specifically designed for powersports to
significantly increase bulb life and performance. By utilizing
quartz glass which is stronger than a standard H4 bulb,
PIAA ® 's Anti-Vibration bulbs allow better dissipation of heat.
A thicker diameter filament support is fixed to the glass
tube allowing the bulb to withstand a large range of motion.
(Please refer to the 2009 PIAA ® Bulb Application Guide at www.piaa.
com/Powersports/guide.html.)
Super Plasma GT-X – A new addition to PIAA ® 's
line of high-performance bulbs is the Super Plasma GT-X,
with a unique twin beam design. The low beam is a purple
color shining at 5000K, while the High Power Halogen high
beam maintains Xtreme White performance at 3800K. A
purple colored topcoat gives the headlamp a purple look
even when the lamp is turned off. At 5000 Kelvin, the Super
Plasma GT-X bulbs offer an unmatched combination of
fashion and performance.
Xtreme White Plus – PIAA's ® most popular
headlight bulb by far. The Xtreme White is the favorite
combination of color and performance. The addition of
the anti-vibration characteristics makes this the perfect
bulb for every application. The blue top coat on this series
of bulbs adds a slight blue tint to a lamp with no loss of
performance. Xtreme White Plus bulbs are whiter, brighter,
and close to the color of sunlight.
Star White – Star White bulbs are significantly whiter
and brighter than normal halogen bulbs. Star White bulbs
feature PIAA's ® exclusive XTRA Technology, which increases
bulb performance without taxing your bike's electrical
system. Star White technology approaches the color and
intensity of H.I.D. color temperature, 3800 Kelvin.
4. NEW! PIAA ® H4 Star White Bulb
Fits all H-4 applications
ABA-0SS58-40-06 $39.95
6
5. NEW! PIAA ® H4 Xtreme White Plus
Bulb
Fits all H-4 applications
ABA-0SS58-40-07 $49.95
6. NEW! PIAA ® H4 Super Plasma GT-X
Bulb
Fits all H-4 applications
ABA-0SS58-40-08 $49.95
IMPORTANT NOTE:
All street-legal motorcycles models are regulated by the EPA and state law. This accessory affects exhaust emissions
and is for closed-course competition only. Use on public roads constitutes illegal tampering and punishable by law.

DISTRIBUTED BY YAMAHA
Sportbike Accessories
1. NEW! PIAA ® H7 Xtreme White Plus
Bulb
Rated at 4000K and providing 110 watts of light from
only 55W, these bulbs emit a brilliant Xtreme cool white
light that illuminates road hazards and signs long before
a normal halogen bulb would.
Fits '03~'10 R6, '06~'09 R6S
ABA-0SS58-40-11 $49.95
1
2
2. NEW! Motorcycle Gas Filler Unit
Developed by McCuff ® Industries, Inc. This gas filler unit
allows you to easily fill up your motorcycle without needing
to check your fuel tank every few second to monitor the fuel
level. The unit facilitates a steady stream of fuel into your
tank. Once the nozzle clicks off, your tank is full on the first
click. Eliminates spills, overflows, and guessing. Comes with
convenient MotoBag ® with Velcro ® system that can attach
to your bike.
Works with Yamaha R1, R6, FZ1, FZ6, FJR1300A/AE,
WR250R/WR250X models
ABA-0SS56-20-19 $19.95