Hunter On-Car Brake Lathes
Hunter On-Car Brake Lathes
Hunter On-Car Brake Lathes
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
®<br />
Pro-Comp Computerized Compensation Speeds<br />
OCL400 Series Operations<br />
With a push of a button and a simple single-point adjustment, the OCL410 and<br />
OCL430MD quickly compensate for lateral runout. Compensation is greatly simplified,<br />
no longer requiring time-consuming dial indicators or special tools. This ensures your<br />
brake service technician is machining the rotor within OEM specifications.<br />
Service Each Rotor in Less Than 9 Minutes!<br />
Step 1: Attach adaptor and<br />
lathe...<br />
Step 2: Press button for<br />
computerized compensation<br />
and make a simple singlepoint<br />
adjustment...<br />
Step 3: Adjust cut depth and<br />
machine rotor with on-the-fly<br />
optimum speed.<br />
Service Complete!<br />
Other Compensation Methods and Models<br />
Manual Single-Point Compensation Model<br />
OCL360S<br />
Compensation of the hub, adaptor and lathe is achieved<br />
with a single-point adjustment. The compensation<br />
process adjusting time is simplified and reduced.<br />
Manual Three-Point Compensation Model<br />
OCL360<br />
Manual three-point runout compensation is<br />
accomplished at the adaptor. The lathe is then<br />
attached and the rotor machined.<br />
The ServoDrive TM System, Pro-Comp ® Computerized Compensation and ACT Anti-Chatter<br />
Technology are not available on OCL360 and OCL360S models.
Change language