To check out the Edgetec calalogue, click here.

Product Index
Tranquillity & Streamline (Spa Bath)……..…. Page 2 Extreme Spa Pool Jet…….…………………………... Page 21
Jets Silhouette, Mid & Mini (Spa Bath)..................... Page 3 Excess 84 Spa Pool Jet………..…………………….. Page 22
Eyeris & Euro Jets (Spa Bath)……………….... Page 4 Excess 100 Spa Pool Jet……………………............. Page 23
Trio & Mini Trio Jets (Spa Bath)……………..... Page 5 Exhilarator Jets (Spa Pool)……………….…………. Page 24
Maxi Jets (Spa Bath)…………………………...... Page 6 Force 10 Spa Pool – Swim Jet………………………. Page 25
Macro & Mini Jets (Spa Bath/Pool).…………... Page 7 Sub Blaster Jet (Spa Pool)…………………………... Page 26
Enforcer Air Button……………………………… Page 8 Airon Air Control (Spa Pool)………………………… Page 26
ReActive Air Control …………….……………… Page 8 Diverter Valves………………………………………… Page 27
Hi-Flow Air Control………………...................... Page 8 Micro Spa Drain & Spa Drain Valve……................. Page 27
Air Wave Air Control…………………………...... Page 9 Spa Suction Flexi Flange…………………………….. Page 28
Spa Bath Over Flow……………………………… Page 9 Spa Suction 200 US GPM...………………………….. Page 28
Snap Lok Pipe Spacer…………………………... Page 9 Water Manifolds 50mm……………………................ Page 29
Enhance “Bath” Air Injector…………………… Page 10 Water Manifolds 25mm………….............................. Page 29
Bath Supports……………….………................... Page 10 Air Manifolds…………………………………………… Page 30
Spa Bath Suction Flexi Flange………………… Page 11 Water /Air Barbs Y’s & T’s….……………………….. Page 30
Spa Suction Super Low Profile (SLP).............. Page 11 Water Barbs……………………………..……………... Page 31
Bull Nose/Reducing Tees & Wye’s……………. Page 12 Barb Fittings…………………………………………… Page 31
Bungs & End Caps……………….……………… Page 12 Air Check Valve.………………………………………. Page 31
Air Tube Saddle, Lok Rings & Spring Clamp.. Page 12 Water/Air Tube……………………............................. Page 32
MidJet Pump……………………………………… Page 13 Street Elbows………………………………………….. Page 32
TriFlo Pump “Auto Heat”……………………….. Page 14 PVC Plumbing Fittings...…………………………….. Page 33
TriFlo Pump “Xtra-Heat”………………………... Page 15 Jet Tools & PVC Pipe Cutters………………………. Page 34
TriFlo Pump “Eezi Touch”……………………. Page 16 Technical Specifications……………….……………. Page 35
TriFlo Pump “Sensa-Touch”…………………... Page 17 Technical Specifications………………..…………… Page 36
TriFlo Pump “Spa Key”…………………………. Page 18 TriFlo Pump Dimensions & Flow Rates…………… Page 37
MidJet Re-Circ Pump……………………………. Page 19 MidJet Pump Dimensions & Flow Rates………….. Page 38
O² “Spa Pool” Air Injector……………………… Page 20 Jets & Spa Suction Removal Instructions.............. Page 39
FX Spa Pool Jet…………………………………... Page 20 Terms & Conditions………………………….............. Page 40
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 1

6
7
NEW
3
4
5
5
1
2
Tranquillity Spa Bath Jets
Item # Part Number Description Carton Qty
1 2051-CH Tranquillity 66 Jet Chrome 300
2 2052-CH Tranquillity 76 Jet Chrome 300
3 2037-00 Tranquillity 66 Jet Body 100
4 2038-00 Tranquillity 76 Jet Body 100
Streamline Jet
Item # Part Number Description Carton Qty
5 2042-CH Streamline Jet Chrome 900
6 2019-00 Streamline Jet Body & Locknut 150
7 2015-00 Streamline Jet Body 19mm Barbed & Locknut 300
Tranquillity Spa Bath Jets
The new Tranquillity Jets have been designed with a super low profile jet face minimizing the
intrusion of the jet face into the bath, ensuring bather comfort.
The Tranquillity jet is designed to give optimum performance using increased airflow during the
venturi operation.
Tranquillity jets are fully adjustable, turning the jet nozzle anti clockwise for the fully open
position and clockwise to the off position.
The Tranquillity eyeball features fingertip flow adjustment and directional control.
Tranquillity Jet bodies are available in 25mm (hard plumb) and manufactured in PVC.
Tranquillity 76 Jet face diameter is 76mm and the hole size required is 60mm
Tranquillity 66 Jet face diameter is 66mm and the hole size required is 50mm
Streamline Jet
The Streamline Jet is designed to give optimum performance using lower water flow with
increased airflow during the venturi operation.
Streamline Jet is fully adjustable, turning the jet anti clockwise for the fully open position and
clockwise for the off position (note: in the off position a minimal amount of water will still flow
from the jet. This is to ensure that the pump will still get adequate water should all the jets be
turned to the off position during spa operation.
Streamline Jet bodies are available in 25mm (hard plumb) or 19mm barbed (soft plumb) and
are manufactured in PVC.
Jet face diameter is 42mm and the hole size required is 28mm.
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 2

4
5
6
NEW
1
2
3
Silhouette Spa Bath Jets
Item # Part Number Description Carton Qty
1 2035-WH Silhouette Jet White 300
1 2035-CH Silhouette Jet Chrome 300
2 2034-WH Mid Silhouette Jet White 800
2 2034-CH Mid Silhouette Jet Chrome 800
3 2014-WH Mini Silhouette Jet White 900
3 2014-CH Mini Silhouette Jet Chrome 900
4 2029-00 Silhouette Jet Body 100
5 2019-00 Mini/Mid Silhouette Jet Body 150
6 2015-00 Mini/Mid Silhouette Jet Body 19mm Barbed 300
The new Silhouette Jets have a super low profile jet face minimizing the intrusion of the jet face
into the bath, ensuring bather comfort.
The Silhouette jet is designed to give optimum performance using lower water flow with
increased airflow during the venturi operation.
Silhouette jets are Non Adjustable.
Silhouette Jet bodies are available in 25mm (hard plumb) and manufactured in PVC the Mini
and Mid are available in 25mm hard plumb or 19mm soft plumb.
Mini Silhouette jet face diameter is 41mm and the hole size required is 28mm
Mid Silhouette Jet face diameter is 50mm and the hole size required is 28mm
Silhouette Jet face diameter is 65mm and the hole size required is 44mm
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 3

3
5
6
1
2
4
Eyeris Jets
(Patented)
Item # Part Number Description Carton Qty
1 2022-WH Eyeris Jet White 300
1 2022-CH Eyeris Jet Chrome 300
2 2025-WH Eyeris Pulse Jet White 300
2 2025-CH Eyeris Pulse Jet Chrome 300
3 2029-00 Eyeris Jet Body & Locknut 100
Euro Jets
(Patented)
Item # Part Number Description Carton Qty
4 2012-WH Euro Jet White 1,000
4 2012-CH Euro Jet Chrome 900
5 2019-00 Euro Jet Body & Locknut 150
6 2015-00 Euro Jet Body 19mm Barbed & Locknut 300
Eyeris Jet
The Eyeris jet is designed to give optimum performance using lower water flow with increased
airflow during the venturi operation.
Eyeris jets are fully adjustable, turning the jet anti clockwise for the fully open position and
clockwise to the off position.
Eyeris eyeball features fingertip directional control.
Eyeris Pulse jet gives an invigorating pulsing massage
The Easy-Out function allows jets to be removed and changed without the use of a tool. To
remove the jet with the Easy-Out function, simply rotate the jet face passed the off position
(Clockwise). The Jet face will hesitate slightly and then pop out.
Eyeris Jet bodies are available in 25mm (hard plumb) and manufactured in PVC.
Jet face diameter is 72mm and hole size required is 44mm.
Euro Jet
The Euro Jet is designed to give optimum performance using lower water flow with
increased airflow during the venturi operation.
Euro Jet is fully adjustable, turning the jet anti clockwise for the fully open position and
clockwise for the off position (note: in the off position a minimal amount of water will still flow
from the jet. This is to ensure that the pump will still get adequate water should all the jets be
turned to the off position during spa operation).
Euro Jet bodies are available in 25mm (hard plumb) or 19mm barbed (soft plumb) and are
manufactured in PVC.
Jet face diameter is 42mm and the hole size required is 28mm.
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 4

3
5
6
1
2
4
Trio Jet
(Patented)
Item # Part Number Description Carton Qty
1 2027-WH Trio Jet White 300
1 2027-CH Trio Jet Chrome 300
2 2026-WH Trio Pulse Jet White 300
2 2026-CH Trio Pulse Jet Chrome 300
3 2029-00 Trio Jet Body & Locknut 100
Mini Trio Jet
(Patented)
Item # Part Number Description Carton Qty
4 2013-WH Mini Trio Jet White 1,000
4 2013-CH Mini Trio Jet Chrome 900
5 2019-00 Mini Trio Jet Body & Locknut 150
6 2015-00 Mini Trio Jet Body 19mm Barbed & Locknut 300
Trio Jet
The Trio jet is designed to give optimum performance using lower water flow with increased
airflow during the venturi operation.
Trio jets are fully adjustable, turning the jet anti clockwise for the fully open position and
clockwise to the off position.
Trio eyeball features fingertip directional control.
Trio Pulse jet gives an invigorating pulsing massage
The Easy-Out function allows jets to be removed and changed without the use of a tool. To
remove the jet with the Easy-Out function, simply rotate the jet face passed the off position
(Clockwise). The Jet face will hesitate slightly and then pop out.
Trio Jet bodies are available in 25mm (hard plumb) and manufactured in PVC.
Jet face diameter is 72mm and hole size required is 44mm.
Mini Trio
The Mini Trio Jet is designed to give optimum performance using lower water flow with
increased airflow during the venturi operation.
Mini Trio Jet is fully adjustable, turning the jet anti clockwise for the fully open position and
clockwise for the off position (note: in the off position a minimal amount of water will still flow
from the jet. This is to ensure that the pump will still get adequate water should all the jets be
turned to the off position during spa operation).
Mini Trio Jet bodies are available in 25mm (hard plumb) or 19mm barbed (soft plumb) and are
manufactured in PVC.
Jet face diameter is 42mm and the hole size required is 28mm.
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 5

2
1
Maxi Jet
Adjustable Spa Bath Jets
(Patented)
Item # Part Number Description Carton Qty
1 2030-WH Maxi Jet White 200
1 2030-CH Maxi Jet Chrome 200
2 2039-00 Maxi Jet Body & Locknut 70
Conventional jets draw air only on the outer surface of the water stream.
The Maxi jets have SVT-Super Venturi Technology-(Patented) which allows the air venturi to be
drawn into both the centre and the outer surface of the water stream resulting in a more efficient
venturi action.
Maxi jets are fully adjustable, turning the jet anti clockwise for the fully open position and
clockwise to the off position.
The Maxi jet eyeball features fingertip directional control.
The Easy-Out function allows jets to be removed and changed without the use of a tool. To
remove the jet with the Easy-Out function, simply rotate the jet face passed the off position
(Clockwise). The Jet face will hesitate slightly and then pop out.
Maxi Jet bodies are available in 25mm (hard plumb) and manufactured in PVC.
Jet face diameter is 84mm and the hole size required is 60mm.
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 6

9
7
8
6
5
4
3
2
1
Mini/Macro Spa Bath & Spa Pool Jets
Item # Part Number Description Box Qty
1 4214-SS Ozone Jet Stainless Steel c/w Body 550
2 4214-WH Ozone Jet White c/w Body 500
2 4214-GR Ozone Jet Grey c/w Body 500
3 4280-GR Mini Pulse Jet Grey c/w Body 500
3 4281-CH Mini Pulse Jet Chrome c/w Body 500
4 4284-WH Mini Jet White c/w Body 500
4 4284-GR Mini Jet Grey c/w Body 500
4 4283-CH Mini Jet Chrome c/w Body 500
5 4218-SS Macro Jet Stainless Steel c/w Body 500
6 4222-WH Macro Jet 5 Scalloped White c/w Body 500
6 4222-GR Macro Jet 5 Scalloped Grey c/w Body 500
7 4242-CH Macro Pulse 2”Jet Chrome c/w Body 500
7 4240-WH Macro Pulse 2”Jet White c/w Body 500
8 4834 Barb Elbow 90 ¾” (.250 orifice) 1000
8 4844 Barb Elbow 90 ¾” (.340 orifice) 1000
9 4810 Tee – 25mm x 25mm 250
Mini & Macro Jets are non-adjustable with an eyeball or pulse options.
Mini & Macro Jet bodies are available in 25mm (hard plumb) or 19mm barbed (soft plumb) and
are manufactured in PVC.
Mini jet face diameter is 41mm and the hole size required is 25mm.
Macro jet face diameter is 55mm and the hole size required is 25mm
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 7

3
NEW
1 2
Enforcer Air Buttons
Item # Part Number Description Carton QTY
1 1111-WH Enforcer Air Button White 200
1 1111-CH Enforcer Air Button Chrome 200
1 1111-GR Enforcer Air Button Grey 200
Low profile design with high Volume.
New adhesive pad fitted for easy installation, no need to use silicone.
Hole size required for air button 35mm.
Hi-Flow 4 Way Air Controls (Smooth Cap)
Item # Part Number Description Carton Qty
2 1220-WH Hi-Flow Air Control 4 Way White 100
2 1220-CH Hi-Flow Air Control4 Way Chrome 100
New design allows you to run 4 separate lines to venturi your spa bath jets, ideal for multi jets
spas.
No Lock nut required, has the new self adhesive pad for easy installation
Increased air opening allows more air intake to ensure adequate air supply to all jets.
4 way barbs rotate 360º for easy alignment.
Positive sealing diaphragm ensuring no water feed back under normal bath conditions.
Under bath spring to ensure stability during bath installation.
Hole size required is 29mm
ReActive Air Controls (Smooth Cap)
Item # Part Number Description Carton Qty
3 1200-WH Air Control White 200
3 1200-CH Air Control Chrome 200
Hole size required for air control 25mm.
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 8

NEW
Airwave Air Control
Item # Part Number Description Carton Qty
1 1400 Air Wave-Air Control 100
Airwave fit under the bath and allows air to the spa jets during spa operation.
By using the Airwave you allow the bath edge to be free from any controls.
Airwave is fitted with a float valve so that water cannot leak under normal bath usage.
Spa Bath Over Flow
Item # Part Number Description Carton Qty
1 1800-WH Bath Over Flow-White 100
1 1800-CH Bath Over Flow-Chrome 100
Spa Bath Over Flow face diameter is 42mm and the hole size required is 28mm.
Snap Lok Pipe Space
Part Number Description Carton Qty
3400 Pipe Spacer 40mm x 25mm 200
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 9

2
NEW
1
3 4
Enhance Spa Bath Air Injectors
Item # Part Number Description Carton Qty
1 2001-WH Enhance Air Injector-White 900
1 2001-CH Enhance Air Injector-Chrome 900
Enhance “Brass” Air Injectors
2 2002-CH Enhance Air Injector-Brass Body-Chrome 20
3 4448 Air Injector Elbow (Brass Enhance) 200
4 4449 Air Injector Tee (Brass Enhance) 200
The Enhance air injector is a low profile air injector that enhances (hence the name) the finish of
your bath and has been designed to withstand a person standing on it in a shower/bath
combination.
The side air outlets ensure that the air is propelled over the body, ensuring a lasting massage.
The Enhance air injector has a unique lip seal, which means that you do not have to use silicon
inside the bath.
The one piece moulded body (maximum bath thickness 13mm) ensures that it is leak proof and
can be installed by one person.
The Enhance “Brass Body” air injector is for use in baths with a base greater than 13mm in
thickness, it has all the same features as the standard Enhance air injector.
The Enhance air injector has a cone valve under the cap to stop any water bypassing when the
system is not being used.
The lock nut and compensating ring ensures that any undulation under the bath is compensated
for, ensuring a water tight seal.
Air Injector cap diameter is 27mm and the hole size required is 16mm.
2
1
Item # Part Number Description Carton Qty
1 1180 Bath Support 600mm c/w Self Aligning Adjustable Feet 20
2 1181 Bath Support 1000mm c/w Self Aligning Adjustable Feet 20
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 10

3
4
1
2
Flexi-Flange Spa Bath Suctions
Item # Part Number Description Carton Qty
1 1300-WH Spa Suction-White 125
1 1300-CH Spa Suction-Chrome 125
3 1340 Spa Suction Adapter 40mm 150
4 1360 Spa Suction Tee c/w Bung 40mm 50
Flexi Flange Spa suctions comply to the hair entrapment requirements of ASNZS
60335.2.60
Self-draining Tee body allows no water retention to a maximum angle of 20°.
Flexible flange moulds to the shape of the bath or pool ensuring a total sealing area on angled
or uneven surfaces. Flexi Flange is available on the 40mm Tee & 40mm Straight.
The body thread & suction nut combine to make a piston seal to ensure that a liberal coverage
of silicon is pushed in and around the fibreglass and acrylic section cut by the hole saw.
The spa suction has a flow rate of 310 lpm ensuring sufficient water for the extra jets now being
installed.
The spa cover has no screws on the face and has a positive catch arrangement for easy colour
change or cleaning.
Hole size required 60mm.
SLP (Super Low Profile) Spa Bath Suctions
Item # Part Number Description Carton Qty
2 1320-WH SLP Spa Suction-White 180
2 1320-CH SLP Spa Suction-Chrome 180
3 1340 Spa Suction Adapter 40mm 150
4 1360 Spa Suction Tee c/w Bung 40mm 50
SLP Spa suctions comply to the hair entrapment requirements of ASNZS 60335.2.60
SLP (Super Low Profile) spa suction cover is a low profile cover with a height of only 15mm
compared to our flexi flange spa suction which has a height of 23mm
Self-draining Tee body allows no water retention to a maximum angle of 20°.
Flexible flange moulds to the shape of the bath ensuring a total sealing area on angled or
uneven surfaces. Flexi Flange is available on the 40mm Tee & 40mm Straight.
The body thread & suction nut combine to make a piston seal to ensure that a liberal coverage
of silicon is pushed in and around the fibreglass and acrylic section cut by the hole saw.
The SLP spa suction has a flow rate of 150 lpm.
The spa cover has no screws on the face and has a positive catch arrangement for easy colour
change or cleaning.
Hole size required 60mm.
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 11

1
2
3
4
5
6
Bull Nose Tee, Reducing Tees & Wye’s
Item # Part Number Description Carton Qty
1 3212 Bull Nose Tee 25mm x 40mm x 25mm 100
2 3213 Reducing Tee 40mm x 25mm x 25mm 90° 100
3 3214 Reducing Tee 40mm x 25mm x 25mm 45° 100
4 3215 Reducer 40mm x 25mm 100
5 4360 25mm x 25mmx 25mm Wye Fitting 25° 250
6 3245 25mm x 25mmx 25mm Wye Fitting 45° 250
5
4
3
2
6
7
1
8
9
Bungs, End Caps, Air Tube Saddle & Lokring's ,
Item # Part Number Description Carton Qty
1 3200 25mm X10mm Air Tube Saddle 1500
2 3225 Bung 25mm 1500
3 3226 End Cap 25mm 1000
4 3240 Bung 40mm 500
5 7600 Bung 50mm 200
6 3100 10mm Lokring (Air) 15000
7 3190 19mm Lokring (Water) 2000
8 7140 End Cap 40mm 25
9 7002 Spring Wire Clamp E-SWC-024 (19mm) 1500
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 12

NEW
MidJet Auto-Heat-Air Switch
(Patented)
Item # Part Number Description Pallet Qty
1 6300 Spa Bath Pump 0.37Hp-Auto-Heat 58
6652 Air Tube 3mm ID x 4 Metres TriFlo 1
6653 Barrel Union Bulk Pack-TriFlo (10 Sets) 1
Auto-Heat: MidJet’s unique back plate design allows the heat generated by the motor to be
transferred into the water allowing the pump to help maintain water temperature.
Super-Flow: MidJet’s unique design provides powerful water flow to the spa jets. Leading edge
CFD technology has refined the impeller and flow path for optimum performance and efficiency,
ensuring you to relax in an invigorating water massage.
Quiet Operation: MidJet’s optimized water flow path reduces water turbulence and noise inside
the pump casing. The TEFC motor has integral molded Elastomer anti - vibration pad in the
motor foot for super quiet operation.
World Standards: MidJet’s meets all the required standards with regards to water retention
and electrical requirements. IP55 protective housing allows the pump to be installed in an
outdoor environment without the need of an expensive pump cover.
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 13

3
2
1
TriFlo Auto-Heat-Air Switch
(Patented)
Item # Part Number Description Pallet Qty
1 6106 Spa Bath Pump 0.8 Hp-Auto-Heat 58
1 6100 Spa Bath Pump 1 Hp-Auto-Heat-HF 58
1 6103 Spa Bath Pump 1 ½ Hp-Auto-Heat 58
2 3126 Top Tee TriFlo 100
3 3127 Top Out 90º TriFlo 100
6652 Air Tube 3mm ID x 4 Metres TriFlo 1
6653 Barrel Union Bulk Pack-TriFlo (10 Sets) 1
Auto-Heat: TriFlo’s unique back plate design allows the heat generated by the motor to be
transferred into the water allowing the pump to help maintain water temperature.
Super-Flow: TriFlo’s unique design provides powerful water flow to the spa jets. Leading edge
CFD technology has refined the impeller and flow path for optimum performance and efficiency,
ensuring you to relax in an invigorating water massage.
Multi Ports: Allows you the option of sparing via two outlets from the pump ensuring even
delivery of water pressure to all jets, especially on multi jet systems.
Air Bleed: Air bleed can be activated any time should air locking occur. The air bleed has an o
ring seal to ensure positive sealing once air has been expelled.
Quiet Operation: TriFlo’s optimized water flow path reduces water turbulence and noise inside
the pump casing. The TEFC motor has integral molded Elastomer anti - vibration pad in the
motor foot for super quiet operation.
World Standards: TriFlo meets all the required standards with regards to water retention and
electrical requirements. IP55 protective housing allows the pump to be installed in an outdoor
environment without the need of an expensive pump cover.
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 14

3
2
1
TriFlo Xtra-Heat-Air Switch
(Patented)
Item # Part Number Description Pallet Qty
1 6107 Spa Bath Pump 0.8 Hp-Xtra-Heat 58
1 6101 Spa Bath Pump 1 Hp-Xtra-Heat-HF 58
1 6104 Spa Bath Pump 1 ½ Hp-Xtra-Heat 58
2 3126 Top Tee TriFlo 100
3 3127 Top Out 90º TriFlo 100
6652 Air Tube 3mm ID x 4 Metres TriFlo 1
6653 Barrel Union Bulk Pack-TriFlo (10 Sets) 1
Super-Flow: TriFlo’s unique design provides powerful water flow to the spa jets. Leading edge
CFD technology has refined the impeller and flow path for optimum performance and efficiency,
ensuring you to relax in an invigorating water massage.
Muti Ports: Allows you the option of sparing via two outlets from the pump ensuring even
delivery of water pressure to all jets, especially on multi jet systems.
Heater: Xtra-Heat has an innovative flat plate 700watt stainless steel heater element, the
design of the flat plate ensures that there is no interruption to the water flow path ensuring
continuity of flow to all spa jets.
Air Bleed: Air bleed can be activated any time should air locking occur. The air bleed has an o
ring seal to ensure positive sealing once air has been expelled.
Quiet Operation: TriFlo’s optimized water flow path reduces water turbulence and noise inside
the pump casing. The TEFC motor has integral molded Elastomer anti - vibration pad in the
motor foot for super quiet operation.
World Standards: TriFlo meets all the required standards with regards to water retention and
electrical requirements. IP55 protective housing allows the pump to be installed in an outdoor
environment without the need of an expensive pump cover.
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 15

4
3
NEW
2
1
TriFlo Eezi-Touch
(Patented)
Item # Part Number Description Pallet Qty
1 6127 Spa Bath Pump 0.8 Hp-Eezi-Touch 58
1 6121 Spa Bath Pump 1 Hp-Eezi-Touch-HF 58
1 6124 Spa Bath Pump 1 ½ Hp-Eezi-Touch 58
2 6500 Eezi Touch-Touch Pad 58
3 3126 Top Tee TriFlo 100
4 3127 Top Out 90º TriFlo 100
9-2083 Cable signal Eezi-Touch 8 Way c/w Boot x 4mt 1
6653 Barrel Union Bulk Pack-TriFlo (10 Sets) 1
Eezi-Touch: Has a touch pad that allows you to turn the pump on & off from the edge of your
bath.
No Water/Blocked Suction: The Eezi-Touch pump has the extra function of no water/blocked
suction detection, should the Eezi-Touch pump function be activated and there is no water in
the bath or the suction becomes blocked the pump will automatically shut down.
Super-Flow: TriFlo’s unique design provides powerful water flow to the spa jets. Leading edge
CFD technology has refined the impeller and flow path for optimum performance and efficiency,
ensuring you to relax in an invigorating water massage.
Heater: Eezi-Touch has an innovative flat plate 700watt stainless steel heater element, the
design of the flat plate ensures that there is no interruption to the water flow path ensuring
continuity of flow to all spa jets.
Multi Ports: Allows you the option of sparing via two outlets from the pump ensuring even
delivery of water pressure to all jets, especially on multi jet systems.
Air Bleed: Air bleed can be activated any time should air locking occur. The air bleed has an o
ring seal to ensure positive sealing once air has been expelled.
Quiet Operation: TriFlo’s optimized water flow path reduces water turbulence and noise inside
the pump casing. The TEFC motor has integral molded Elastomer anti - vibration pad in the
motor foot for super quiet operation.
World Standards: TriFlo meets all the required standards with regards to water retention and
electrical requirements. IP55 protective housing allows the pump to be installed in an outdoor
environment without the need of an expensive pump cover.
Eezi Touch Pad dimensions are 40mm and the hole size required is 25mm.
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 16

3
2
NEW
1
TriFlo Sensa-Touch
(Patented)
Item # Part Number Description Pallet Qty
1 6111 Spa Bath Pump 0.8 Hp-Sensa-Touch 58
1 6109 Spa Bath Pump 1 Hp-Sensa-Touch-HF 58
1 6110 Spa Bath Pump 1 ½ Hp-Sensa-Touch 58
2 3126 Top Tee TriFlo 100
3 3127 Top Out 90º TriFlo 100
9-2083 Cable signal Sensa-Touch 8 Way c/w Boot x 4mt 1
6653 Barrel Union Bulk Pack-TriFlo (10 Sets) 1
Sensa-Touch: Is a two button touch pad that allows you to turn the pump on & off, and adjust
your heating requirements from high, medium, low or off from the edge of your bath.
No Water/Blocked Suction: The Sensa -Touch pump has the extra function of no
water/blocked suction detection, should the Sensa -Touch pump function be activated and there
is no water in the bath or the suction becomes blocked the pump will automatically shut down.
Super-Flow: TriFlo’s unique design provides powerful water flow to the spa jets. Leading edge
CFD technology has refined the impeller and flow path for optimum performance and efficiency,
ensuring you to relax in an invigorating water massage.
Heater: Sensa-Touch has an innovative flat plate 700watt stainless steel heater element, the
design of the flat plate ensures that there is no interruption to the water flow path ensuring
continuity of flow to all spa jets.
Multi Ports: Allows you the option of sparing via two outlets from the pump ensuring even
delivery of water pressure to all jets, especially on multi jet systems.
Air Bleed: Air bleed can be activated any time should air locking occur. The air bleed has an o
ring seal to ensure positive sealing once air has been expelled.
Quiet Operation: TriFlo’s optimized water flow path reduces water turbulence and noise inside
the pump casing. The TEFC motor has integral molded Elastomer anti - vibration pad in the
motor foot for super quiet operation.
World Standards: TriFlo meets all the required standards with regards to water retention and
electrical requirements. IP55 protective housing allows the pump to be installed in an outdoor
environment without the need of an expensive pump cover.
Sensa Touch Pad dimensions are 70mm x 50mm and the hole size required is 25mm.
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 17

3
2
1
TriFlo Spa-Key
(Patented)
Item # Part Number Description Pallet Qty
1 6108 Spa Bath Pump 0.8 Hp-Spa-Key 58
1 6102 Spa Bath Pump 1 Hp-Spa-Key-HF 58
1 6105 Spa Bath Pump 1 ½ Hp-Spa-Key 58
2 3126 Top Tee TriFlo 100
3 3127 Top Out 90º TriFlo 100
6653 Barrel Union Bulk Pack-TriFlo (10 Sets) 1
Spa-Key: Is a revolution in spa bath pump control, the 4 Function Hand Set allows you to
remotely control your spa pump, heater, blower and light. The Spa-Key can be fitted to the wall
using the wall mounted bracket supplied.
No Water/Blocked Suction: The Spa Key pump has the extra function of no water/blocked
suction detection, should the Spa Key pump function be activated and there is no water in the
bath or the suction becomes blocked the pump will automatically shut down.
Super-Flow: TriFlo’s unique design provides powerful water flow to the spa jets. Leading edge
CFD technology has refined the impeller and flow path for optimum performance and efficiency,
ensuring you to relax in an invigorating water massage.
Heater: Spa Key has an innovative flat plate 700watt stainless steel heater element, the design
of the flat plate ensures that there is no interruption to the water flow path ensuring continuity of
flow to all spa jets.
Multi Ports: Allows you the option of sparing via two outlets from the pump ensuring even
delivery of water pressure to all jets, especially on multi jet systems.
Air Bleed: Air bleed can be activated any time should air locking occur. The air bleed has an o
ring seal to ensure positive sealing once air has been expelled.
Quiet Operation: TriFlo’s optimized water flow path reduces water turbulence and noise inside
the pump casing. The TEFC motor has integral molded Elastomer anti - vibration pad in the
motor foot for super quiet operation.
World Standards: TriFlo meets all the required standards with regards to water retention and
electrical requirements. IP55 protective housing allows the pump to be installed in an outdoor
environment without the need of an expensive pump cover.
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 18

NEW
MidJet Re-Circ Auto-Heat Pump
(Patented)
Item # Part Number Description Pallet Qty
1 6350 Midjet 220 W Re circ-Auto Heat 58
6653 Barrel Union Bulk Pack-TriFlo (10 Sets) 1
Auto-Heat: MidJet’s unique back plate design allows the heat generated by the motor to be
transferred into the water allowing the pump to help maintain water temperature.
Super-Flow: MidJet’s unique design provides powerful water flow to the spa jets. Leading edge
CFD technology has refined the impeller and flow path for optimum performance and efficiency,
ensuring you to relax in an invigorating water massage.
Quiet Operation: MidJet’s optimized water flow path reduces water turbulence and noise inside
the pump casing. The TEFC motor has integral molded Elastomer anti - vibration pad in the
motor foot for super quiet operation.
World Standards: MidJet’s meets all the required standards with regards to water retention
and electrical requirements. IP55 protective housing allows the pump to be installed in an
outdoor environment without the need of an expensive pump cover.
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 19

2
1
O²Spa Pool Air Injector
Item # Part Number Description Carton Qty
1 2000-GR Air Injector O²-Grey 900
1 2000-WH Air Injector O²-White 900
2 2000-SS Air Injector O²-Stainless Steel 900
The O² air injector is a multi hole air injector that gives an exhilarating air massage.
The one piece moulded body ensures that it is leak proof and can be installed by one
person.
The O² air injector has a unique lip seal, which means that you do not have to use
silicon inside the spa pool.
The lock nut and compensating ring ensures that any undulation under the spa is
compensated for, ensuring a water tight seal.
Stainless Steel Escutcheons are 316 and have a unique rolled edge to ensure
there are no sharp edges from tabs
Air Injector cap diameter is 33mm and the hole size required is 17.4mm.
FX Spa Pool Jets
Item # Part Number Description Carton Qty
1 4220-GR FX Spa Pool Jet c/w Compensating Ring & Lock Nut-Grey 300
Fully adjustable face with a fixed eyeball design.
The spa jet body has the anti vortex deflector moulded into the body.
The spa nut has the compensating ring and nut to ensure a total uniform pressure on
any undulating surface.
Jet face diameter is 53mm and the hole size required is 38mm.
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 20

2
5
4
1
3
Extreme Spa Pool Jets
(Patented)
Item # Part Number Description Carton Qty
1 2730-GR Extreme Spa Jet-Grey 250
1 2730-WH Extreme Spa Jet-White 250
2 2730-SS Extreme Spa Jet-Stainless Steel 250
3 2740-GR Extreme Twin Spin Spa Jet-Grey 250
3 2740-WH Extreme Twin Spin Spa Jet-White 250
4 2740-SS Extreme Twin Spin-Stainless Steel 250
5 2500-00 Extreme Spa Jet Body c/w Lock Nut,
Compensating Ring & Gasket
5 2500-50 Extreme Spa Jet Body “No Air” c/w Lock Nut,
Compensating Ring & Gasket
100
100
Conventional jets draw air only on the outer surface of the water stream.
SVT-Super Venturi Technology-(Patented) allows the air to be drawn into both the centre and
the outer surface of the water stream resulting in a more efficient venturi action.
SVT feature uses 25% less water than current spa pool jets.
The flared nozzle and twin spin designs enhance the water rotation and complete with the SVT
gives you an Exhilarating massage.
Stainless Steel Escutcheons are 316 and have a unique rolled edge to ensure there
are no sharp edges from tabs.
The spa jet body has the anti-vortex deflector moulded into the body.
The spa nut has our compensating ring and nut design to ensure a total uniform pressure on
any undulating surface.
Jet face diameter is 74mm and the hole size required is 54mm.
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 21

4
2
5
3
1
Excess 84 Spa Pool Jets
(Patented)
Item # Part Number Description Carton Qty
1 2780-GR Excess 84 Spa Jet-Grey 200
1 2780-WH Excess 84 Spa Jet-White 200
2 2780-SS Excess 84 Spa Jet-Stainless Steel 200
3 2790-GR Excess 84 Twin Spin Spa Jet-Grey 200
3 2790-WH Excess 84 Twin Spin Spa Jet-White 200
4 2790-SS Excess 84 Twin Spin-Stainless Steel 200
5 2700-00 Excess Spa Jet Body c/w Flexi Flange Lock Nut & Gasket 100
5 2700-50 Excess Spa Jet Body c/w Lock Nut, Compensating Ring & Gasket 100
Conventional jets draw air only on the outer surface of the water stream.
SVT-Super Venturi Technology-(Patented) allows the air venturi to be drawn into both the
centre and the outer surface of the water stream resulting in a more efficient venturi action.
SVT feature uses 25% less water than current spa pool jets.
The flared nozzle and twin spin designs enhance the water rotation and complete with the SVT
gives you an Exhilarating massage.
Stainless Steel Escutcheons are 316 and have a unique rolled edge to ensure there
are no sharp edges from tabs.
The spa jet body has the anti-vortex deflector moulded into the body.
The spa nut has our exclusive flexi-flange design or compensating ring and nut to ensure a total
uniform pressure on any undulating surface.
Jet face diameter is 84mm and the hole size required is 60mm.
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 22

4
5
2
3
1
Excess 100 Spa Pool Jets
(Patented)
Item # Part Number Description Carton Qty
1 2710-GR Excess 100 Spa Jet-Grey 125
1 2710-WH Excess 100 Spa Jet-White 125
2 2710-SS Excess 100 Spa Jet-Stainless Steel 125
3 2720-GR Excess 100 Twin Spin Spa Jet-Grey 125
3 2720-WH Excess 100 Twin Spin Spa Jet-White 125
4 2720-SS Excess 100 Twin Spin-Stainless Steel 125
5 2700-00 Excess Spa Jet Body c/w Lock Nut & Gasket 100
5 2700-50 Excess Spa Jet Body c/w Lock Nut, Compensating Ring & Gasket 100
Conventional jets draw air only on the outer surface of the water stream.
SVT-Super Venturi Technology-(Patented) allows the air venturi to be drawn into both the
centre and the outer surface of the water stream resulting in a more efficient venturi action.
SVT feature uses 25% less water than current spa pool jets.
The flared nozzle and twin spin designs enhance the water rotation and complete with the SVT
gives you an Exhilarating massage.
Stainless Steel Escutcheons are 316 and have a unique rolled edge to ensure there
are no sharp edges from tabs.
The spa jet body has the anti-vortex deflector moulded into the body.
The spa nut has our exclusive flexi-flange design to ensure a total uniform pressure on any
undulating surface
Jet face diameter is 100mm and the hole size required is 60mm.
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 23

7
6
2
4
5
1
3
Exhilarator Spa Pool Jets
(Patented)
Item # Part Number Description Carton Qty
1 2100-GR Exhilarator Spa Jet-Grey 50
1 2100-WH Exhilarator Spa Jet-White 50
2 2100-SS Exhilarator Spa Jet-Stainless Steel 50
3 2200-GR Exhilarator 5 Star Pulse Spa Jet-Grey 50
3 2200-WH Exhilarator 5 Star Pulse Spa Jet-White 50
4 2200-SS Exhilarator 5 Star Pulse-Stainless Steel 50
5 2300-GR Exhilarator Twin Spin Spa Jet-Grey 50
5 2300-WH Exhilarator Twin Spin Spa Jet-White 50
6 2300-SS Exhilarator Twin Spin-Stainless Steel 50
7 2600-00 Exhilarator Spa Jet Body c/w Lock Nut 50
Conventional jets draw air only on the outer surface of the water stream.
SVT-Super Venturi Technology-(Patented) allows the air venturi to be drawn into both the
centre and the outer surface of the water stream resulting in a more efficient venturi action.
SVT feature uses 25% less water than current spa pool jets.
The flared nozzle, twin spin and 5 star pulse designs enhance the water rotation and complete
with the SVT gives you an Exhilarating massage.
Stainless Steel Escutcheons are 316 and have a unique rolled edge to ensure there
are no sharp edges from tabs.
The spa jet body has the anti-vortex deflector moulded into the body.
The spa nut has our exclusive flexi-flange design to ensure a total uniform pressure on any
undulating surface.
Jet face diameter is 126mm and the hole size required 95mm.
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 24

2
6
1-3
4 -5-7
Force 10 Spa Pool-Swim Jet
(Patented)
Item # Part Number Description Carton Qty
1 2800-GR Force 10 Spa Jet 10mm Air c/w 30mm SVT Nozzle-Grey 10
1 2800-WH Force 10 Spa Jet 10mm Air c/w 30mm SVT Nozzle-White 10
2 2800-SS Force 10 Spa Jet 10mm Air c/w 30mm SVT Nozzle-Stainless Steel 10
3 2850-GR Force 10 Swim Jet 10mm Air c/w 25mm Nozzle-Grey 10
3 2850-WH Force 10 Swim Jet 10mm Air c/w 25mm Nozzle -White 10
4 2865-GR Force 10 Swim Jet 15mm Air c/w 25mm Nozzle-Grey 10
4 2865-WH Force 10 Swim Jet 15mm Air c/w 25mm Nozzle -White 10
5 2866-GR Force 10 Spa Jet 15mm Air c/w 38mm SVT Nozzle-Grey 10
6 2866-SS Force 10 Spa Jet 15mm Air c/w 38mm SVT Nozzle-Stainless Steel 10
7 2867-GR Force 10 Swim Jet 15mm Air c/w 38mm Nozzle-Grey 10
7 2867-WH Force 10 Swim Jet 15mm Air c/w 38mm Nozzle-White 10
Conventional jets draw air only on the outer surface of the water stream.
SVT-Super Venturi Technology-(Patented) allows the air to be drawn into both the centre and
the outer surface of the water stream resulting in a more efficient venturi action.
SVT feature uses 25% less water than conventional spa pool jets.
Force 10 eyeballs can be locked into position ensuring complete control of water direction.
The optional nozzles allow for systems to be perfectly balanced. Minimum operating pressures
are 30kpa SVT eyeball & 40kpa standard eyeball.
Stainless Steel Escutcheons are 316 and have a unique rolled edge to ensure there
are no sharp edges from tabs.
The spa nut has our exclusive flexi flange (Patented) design to ensure a total uniform pressure
on any undulating surface.
Jet body has a 50mm spigot allowing 50mm elbows or tee’s to be used in pipe connection.
Force 10 has the option of 10mm flexi-air or 15mm Slip rigid-air, ideal for concrete swim spas or
spa installation.
Force 10 jet face design aligns with the Exhilarator range of spa pool jets.
Jet face diameter is 150mm and the hole size required 108mm.
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 25

NEW
2
1
Sub Blaster Spa Pool Jet
Item # Part Number Description Carton Qty
1 4725-GR Sub Blaster Spa Pool Jet-Grey 8
2 4725-SS Sub Blaster Spa Pool Jet-Stainless Steel 8
Sub Blaster is a non-adjustable jet with 17 outlets that gives you that explosive output of water.
Conventional jets draw air only on the outer surface of the water stream.
SVT-Super Venturi Technology-(Patented) allows the air to be drawn into both the centre and
the outer surface of the water stream resulting in a more efficient venturi action.
SVT feature uses 25% less water than conventional spa pool jets.
Single 19mm air outlet ensures that the required amount of air is delivered into the venturi.
Jet face diameter is 170 and the hole size required 108.
1
2
NEW
Airon Air Control (Spa Pools)
Item # Part Number Description Carton Qty
1 4584-WH Airon Air Control -White 250
1 4584-GR Airon Air Control -Grey 250
2 4580-SS Airon Air Control c/w Stainless Steel 250
Hole size required 44mm.
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 26

1
2
Diverter Valve 50mm
Item # Part Number Description Carton Qty
1 2900-GR Diverter Valve 50mm-Grey 10
1 2900-WH Diverter Valve 50mm-White 10
2 2900-SS Diverter Valve 50mm-Stainless Steel 10
One piece moulded cap for extra strength and ease of grip.
15 position spline for easy cap alignment.
Reduced cap diameter.
Lip seal on the spool shaft to prevent pressure leakage.
High-Flow design of the diverter spool to disperse the water evenly.
Tighter tolerances to minimise bypass.
Integral pockets in the back of the spool to trap dirt and sand and prevent jamming. When the
valve rotates the pockets are automatically flushed.
Hole size required is 80mm.
1
3
2
NEW
Micro Spa Drain & Spa Drain Valve
Item # Part Number Description Carton Qty
1 2920-GR Micro Spa Drain-Grey 100
2 2920-SS Micro Spa Drain-Stainless Steel 100
3 4928 Spa Drain Valve 24
Micro Spa Drain has a one piece moulded body with a 19mm barb fitting and gasket.
Stainless Steel Escutcheons are 316 and have a unique rolled edge to ensure there
are no sharp edges from tabs.
Spa Drain face diameter is 42mm and the hole size required is 28mm.
Spa Drain Valve: The face diameter is 70mm and the hole size required is 44mm.
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 27

2
1
3
Flexi-Flange Spa Suctions
Item # Part Number Description Carton Qty
1 1300-WH Spa Suction-White 125
1 1300-GR Spa Suction-Grey 125
2 1340 Spa Suction Adapter 40mm 150
3 1350 Spa Suction Adapter 50mm 125
Flexi Flange Spa suctions comply to the Hair Entrapment requirements of ASNZS
60335.2.60
Flexible flange moulds to the shape of the bath or pool ensuring a total sealing area on angled
or uneven surfaces. Flexi Flange is available on the 40mm & 50mm Straight.
The body thread & suction nut combine to make a piston seal to ensure that a liberal coverage
of silicon is pushed in and around the fibreglass and acrylic section cut by the hole saw.
The spa suction has a flow rate of 310 lpm ensuring sufficient water for the extra jets now being
installed.
The spa cover has no screws on the face and has a positive catch arrangement for easy colour
change or cleaning.
Hole size required 60mm.
Spa Suctions 200 US GPM
Item # Part Number Description Carton Qty
1 4235-GR Spa Suction 200 US GPM-Grey 10
Hole size required is 89mm.
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 28

4 5 6
7
NEW
2
8
1
3
9
Water Manifolds 50mm
Item # Part Number Description Carton Qty
1 4073 2 Port 19mm x 50mm Slip/Spg Water Manifold 144
2 4074 4 Port (Side by Side) 19mm x 50mm Slip/Spg Water Manifold 100
3 4079 2 Port 19mm x 50mm Spg Water End Manifold 160
4 4075 6 Port 19mm x 50mm Slip/Spg Water Manifold 54
5 4076 4 Port 19mm x 50mm Slip/Spg Water Manifold 90
6 4077 4 Port 19mm x 50mm Slip Plugged End Water Manifold 90
7 4078 4 Port 19mm x 50mm Slip/Slip Water Manifold 72
8 4048 ¾ Plug (use on 4073,4079, 4075, 4076,4077 & 4078) 200
9 4822 Single Port 19mm x 50mm Spg Water Manifold 200
3
1
4
2
Water Manifolds 40mm & 25mm
Item # Part Number Description Carton Qty
1 3228 2 Port 19mm x 25mm Water Manifold 200
2 3229 4 Port 19mm x 25mm Water Manifold 100
3 3230 2 Port 19mm x 25mm (side by side) Water Manifold 250
4 3227 19mm Plug (Long Shanked, use on 3228,3229 & 3230) 200
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 29

4
1
2
3
Air Manifolds
Item # Part Number Description Carton Qty
1 3235 2 Port Air Manifold 25mm x 10mm (side by side) 400
2 3236 4 port air Manifold 25mm x 10mm (side by side) 200
3 3237 Decapod 10 Port/10mm Air Manifold 25mm x 25mm 100
4 4091 4 Port Air Manifold 1”x1” 250
3
1
2
6
5
4
7
Water & Air Barbs, Y & T’s
Item # Part Number Description Carton Qty
1 8000 Air T 9mm 200
2 8002 Air Y 10mm 250
3 4898 Air Coupling 10mm 200
4 8003 Water Y 19mm 200
5 8004 Water T 19mm 550
6 3201 Water Coupling 19mm 500
7 4894 4 Way 10mm Barb Tee 100
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 30

1
2
3
4
5
Water Barbs
Item # Part Number Description Carton Qty
1 3250 Barb 19mm x 25mm Spg (Straight) 750
2 3255 Barb 19mm x 25mm Spg (Angled) 750
3 3262 Barb 19mm x 25mm Spg 90º 500
4 3260 Barb 19mm 4 Way x 25 Spg 200
5 3261 Tee Barb 19mm x 25mm Spg Long 200
1
3
4
2
Barb Fittings
Item # Part Number Description Carton Qty
1 4434 ¾” Barb x ¾” Spg 200
2 4818 3/8” Barb x ½” Spg 200
3 4375 3/8” x 1 ½” Saddle Barb 200
4 4812 3/8” Barb x 1” Spg 300
Air Check Valve
Item #` Part Number Description Carton Qty
1 4150 Air Check Valve 40mm Unionized with 1/4lb Spring 100
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 31

4
1
2 3
Air & Water Tube
Item #` Part Number Description Carton Qty
1 3001 10mm Air Hose (100 Metre Roll) 1
2 3004 10mm Air Hose CLEAR (100 Metre Roll) 1
3 3003 19mm Water Hose (50 Metre Roll) 1
4 3005 25mm Flex Hose (15 Metre Roll) 1
4 3006 40mm Flex Hose (15 Metre Roll) 1
4 3007 50mm Flex Hose (15 Metre Roll) 1
4
6
5
1
2 3
Street Elbows
Item # Part Number Description Carton Qty
1 4600 25mm 90° Street Elbow 100
2 4604 25mm 45° Street Elbow 100
3 3300 40mm 90° Street Elbow 100
4 4602 40mm 45° Street Elbow 100
5 4601 50mm 90° Street Elbow 100
6 4603 50mm 45° Street Elbow 100
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 32

5
6
4
9
3
12
8
7
11
15
2
10
14
1
13
Plumbing Fittings
Item # Part Number Description Carton Qty
1 7100 40mm x 25mm Reducing Bush 25
2 7150 50mm x 40mm Reducing Bush 25
3 7200 25mm Tee 50
4 7250 40mm Tee 25
5 7275 50mm Tee 25
6 7285 50mm x 25mm Reducing Tee 10
7 7300 25mm 90° Elbow 50
8 7350 40mm 90° Elbow 25
9 7375 50mm 90° Elbow 50
10 7400 25mm 45° Elbow 50
11 7450 40mm 45° Elbow 25
12 7475 50mm 45° Elbow 50
13 7500 25mm Coupling 50
14 7550 40mm Coupling 25
15 7575 50mm Coupling 25
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 33

10
14
7
6
11
3
15
13
4
5
2
1
16
12
8 9
Jet Tools & PVC Pipe Cutters
Item # Part Number Description
1 7000 Tranquillity/Drain T Spanner
2 7020 Tranquillity/Mi-Tee Removal Tool
3 7021 Bath Jet Spanner
4 7022 Exhilarator Lock Nut Spanner
5 7023 Force 10 Jet Spanner
6 7024 Excess Jet Spanner
7 7025 Extreme Jet Spanner
8 7027 Silhouette Jet Spanner
9 7028 Mini/Mid Silhouette Jet Spanner
10 7040 Pump Barrel Union Spanner (Square Slots)
11 7041 Pump Barrel Union Spanner (Scalloped Slots)
12 7050 25mm PVC Pipe Cutter
12 7051 40mm PVC Pipe Cutter
13 7052 SLP Spa Suction Cover Tool
14 7053 50mm Spa Suction Adaptor Spanner
15 7054 O² & Enhance Lock Nut Spanner
16 7055 Drill Bit Carbon Tip 17.4mm O2 Air Injector
16 7056 Drill Bit Carbon Tip 16mm Enhance Air Injector
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 34

Technical Specification
Euro /Mini Trio & Streamline Jet Hole size Flow Maxi Jet Hole size Flow
Hole Size 28 mm Hole Size 60mm
Jet Face Diameter 42 mm Jet Face Diameter 84mm
Flow Rate At 60kpa 16 Lpm Flow Rate At 60kpa 35 Lpm
Flow Rate At 90kpa 20 Lpm Flow Rate At 90kpa 42 Lpm
Mini Jet Lock Nut Torque 9Nm Extreme Spa Pool Jet Lock Nut Torque 9Nm
Hole Size 25mm Hole Size 54mm
Jet Face Diameter 41mm Jet Face Diameter 74mm
Flow Rate At 60kpa 16 Lpm Flow Rate At 60kpa 38Lpm
Flow Rate At 90kpa 20 Lpm Flow Rate At 90kpa 46Lpm
Macro Jet Lock Nut Torque 9Nm Extreme Twin Spin Lock Nut Torque 9Nm
Hole Size 25mm Hole Size 54mm
Jet Face Diameter 55mm Jet Face Diameter 74mm
Flow Rate At 60kpa 16 Lpm Flow Rate At 60kpa 37 Lpm
Flow Rate At 90kpa 20 Lpm Flow Rate At 90kpa 45 Lpm
Eyeris Jet Excess 84 Spa Pool Jet Lock Nut Torque 9Nm
Hole Size 44 Mm Hole Size 60mm
Jet Face Diameter 72 Mm Jet Face Diameter 84mm
Flow Rate At 60kpa 28 Lpm Flow Rate At 60kpa 38Lpm
Flow Rate At 90kpa 34 Lpm Flow Rate At 90kpa 46Lpm
Eyeris Pulse Jet Excess 100 Spa Pool Jet Lock Nut Torque 9Nm
Flow Rate At 60kpa 19 Lpm Hole Size 60mm
Flow Rate At 90kpa 23 Lpm Jet Face Diameter 100mm
Trio Jet Flow Rate At 60kpa 38 Lpm
Hole Size 44 Mm Flow Rate At 90kpa 46 Lpm
Jet Face Diameter 72 Mm Excess 84 Twin Spin Lock Nut Torque 9Nm
Flow Rate At 60kpa 28 Lpm Hole Size 60mm
Flow Rate At 90kpa 34 Lpm Jet Face Diameter 84mm
Trio Pulse Jet Flow Rate At 60kpa 37 Lpm
Flow Rate At 60kpa 19 Lpm Flow Rate At 90kpa 45 Lpm
Flow Rate At 90kpa 23 Lpm Excess 100 Twin Spin Lock Nut Torque 9Nm
Tranquillity Jet 66 Hole Size 60mm
Hole Size 50mm Jet Face Diameter 100mm
Jet Face Diameter 66mm Flow Rate At 60kpa 37 Lpm
Flow Rate At 60kpa 31 Lpm Flow Rate At 90kpa 45 Lpm
Flow Rate At 90kpa 40 Lpm Exhilarator Spa Pool Jet Lock Nut Torque 9Nm
Tranquillity Jet 76 Hole Size 95mm
Hole Size 60mm Jet Face Diameter 126mm
Jet Face Diameter 76mm Flow Rate At 60kpa 41 Lpm
Flow Rate At 60kpa 31 Lpm Flow Rate At 90kpa 50 Lpm
Flow Rate At 90kpa 40 Lpm Exhilarator 5 Star Pulse Lock Nut Torque 9Nm
Silhouette Jet Hole Size 95mm
Hole Size 44 Mm Jet Face Diameter 126mm
Jet Face Diameter 65 mm Flow Rate At 60kpa 44 Lpm
Flow Rate At 60kpa 22 Lpm Flow Rate At 90kpa 53 Lpm
Flow Rate At 90kpa 27 Lpm Exhilarator Twin Spin Lock Nut Torque 9Nm
Mini/Mid Silhouette Jet Hole Size 95mm
Hole Size 28 mm Jet Face Diameter 126mm
Mini Jet Face Diameter 40 mm Flow Rate At 60kpa 41 Lpm
Mid Jet Face Diameter 50 mm Flow Rate At 90kpa 50 Lpm
Flow Rate At 60kpa
16 Lpm
Flow Rate At 90kpa
20 Lpm
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 35

Technical Specification
Hole size Flow Hole size Flow
Force Ten Lock Nut Torque 9Nm Enforcer Air Button
Hole Size 108mm Hole Size-Air Button 35mm
Jet Face Diameter 150mm ReActive Air Control
Flow Rate At 60kpa SVT 30mm 316 Lpm Hole Size 25mm
Flow Rate At 90kpa SVT 30mm 384 Lpm Airon Air Control
Flow Rate At 60kpa 25mm 332 Lpm Hole Size 44mm
Flow Rate At 90kpa 25mm 390 Lpm Hi-Flow Air Control
Flow Rate At 60kpa SVT 38mm 570 Lpm Hole Size 29mm
Flow Rate At 60kpa 38mm 690 Lpm Enhance Air Injector Lock Nut Torque 1.4Nm
Sub Blaster Jet Hole Size 16mm
Hole Size 108mm O² Air Injector Lock Nut Torque 1.4Nm
Jet Face Diameter 170mm Hole size 17.4mm
Flow Rate At 60kpa 400 Lpm Diverter Valve
Flow Rate At 90kpa 510 Lpm Hole Size 80mm
FX Spa Jet
Micro Spa Drain
Hole Size 38mm Hole Size 28mm
Jet Face Diameter 53mm Spa Drain Valve
Flow Rate At 60kpa 17 Lpm Hole Size 44mm
Flow Rate At 90kpa 21 Lpm Spa Bath Over Flow
Flexi Flange Spa Suction Lock Nut Torque 9Nm Hole Size 28mm
Hole Size
60mm
Flow Rate
*310Lpm
SLP Spa Suction Lock Nut Torque 9Nm
Hole Size
60mm
Flow Rate
*150Lpm
200 US GPM Spa Suction
Hole Size
89mm
Flow Rate
**200 USGPM
*Flexi Flange/SLP Spa suctions comply to the hair entrapment requirements of
ASNZS 60335.2.60
** Flow rate are in accordance with UL Standards
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 36

HEAD (kPa)
TriFlo Pump Dimensions
Pump Model Hp Power (watts) Width (mm) Height (mm) Length (mm)
TF060 0.8 600 148 198 384
TF075 1 750 148 198 384
TF110 1.5 1100 148 198 406
Pump Model & Part Number
Supply
Voltage
Power
(watts)
Heater
watts)
Current
(amps)
TF060-AH-50 (6106) 230-240 600 0 3.7
TF075-AH-50-HF (6100) 230-240 750 0 4.4
TF110-AH-50 (6103) 230-240 1100 0 5.4
TF060-XH (6107), ET (6127), ST (6111), SK-50 (6108) 230-240 600 700 6.8
TF075-XH (6101), ET (6121), ST (6109), SK-50-HF (6102) 230-240 750 700 7.5
TF110-XH (6104), ET (6124), ST (6110), SK-50 (6105) 230-240 1100 700 8.6
TriFlo Performance Table
140
Pump Performance
120
100
80
60
40
TF060-AH-50
TF075-AH-50-HF
TF110-AH-50
20
0
0 100 200 300 400 500
FLOW (litres/min)
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 37

MidJet Pump Dimensions
Pump Model Hp Power (watts) Width (mm) Height (mm) Length (mm)
MJ022 0.22 220 138 169 305
MJ037 0.37 375 138 169 305
Pump Model
& Part Number
Supply
Voltage
Power
(watts)
Heater
watts)
Current
(amps)
Max Head
(meters)
MJ022 (6350) 230-240 220 0 1.6 11
MJ037 (6300) 230-240 375 0 2.6 11
MJ022
MJ037
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 38

Here
Removal & Installation of the
“Flexi Flange” Spa Suction Cover
Run your finger around the outside of the small holes
until you find the hole that is raised.
Insert a small screw driver or glider clip into the hole
and press the tab down. Rotate the cover in an anti
clockwise direction, once the cover has started to turn
remove your screw driver and keep rotating the cover
until it releases.
To replace the cover look at the under side of the cover
for the larger of the three tabs, locate this tab in the
large opening on the suction nut so that all three tabs
are in their correct position. Turn the suction cover in a
clockwise direction until you hear the cover “click” into
place. The spa is now ready to use.
Removal & Installation of the
“SLP” Spa Suction Cover
To remove the cover place the SLP suction tool in the two
holes that are identified by the raised ribbed sections on the
suction cover (1 st hole second row & last hole 17 th row or
second last row). Rotate the tool in an anti clockwise
direction until the cover separates from the suction lock nut.
To replace the cover or to install the suction cover, place the
SLP suction tool into the two holes identified by the raised
ribbed sections of the suction cover. (1 st hole second row &
last hole 17 th row or second last row). Rotate the cover in a
clockwise direction until the cover tightens. Remove the SLP
suction tool and align the cover to the correct position. The
spa is now ready to use.
Removal of Mi Tee, JetEx, Eyeris, Trio &
Maxi Jets
The new Easy-Out function will allow jets to be
removed and changed without the use of a tool. To
remove the jet with the Easy-Out function, simply
rotate the jet face passed the off position (Clockwise).
The Jet face will hesitate slightly and then pop out.
Removal of Exhilarator, Excess &
Extreme Spa Pool Jets
To remove the spa jets, simply turn the spa jet in an
anti-clockwise direction to the fully open position. Then
turn it a little more and pull the jet towards you, your jet
will now come out of the jet body.
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 39

Terms and Conditions
Pricing: This price list supercedes all previous price lists. Price lists are subject to change without notice.
Terms: All Sales are C.O.D. until credit is established. Standard credit terms are Net 30 Days EOM to
account customers after approval of signed credit application form. Title to the goods shall remain the
property of the company until payment has been received in full. In the event of non payment, any costs
incurred by Edgetec Systems Pty Ltd being debt recovery costs and any solicitor/own client base fees,
will be payable by the client.
GST: All prices are subject to GST at the current rate (10%).
Delivery: Delivery shall be made ex works Melbourne. Regardless of the method of delivery risk of loss
shall pass to the purchaser as soon as the goods leave Edgetec premises. Edgetec assumes no
responsibility for damage in transit.
Warranty: Edgetec Systems Pty Ltd warrants that the items sold hereunder shall be free from defects in
material and workmanship for a period of one (1) year from date of purchase.
Credits: Goods returned for credit must be by prior arrangement with the Company and must be
accompanied by the original delivery docket or invoice. Goods must be received in as new condition, and
claims must be made within seven (7) days of receipt. Edgetec will not be responsible for the cost of
freight for credits.
Re-Stocking Charge: returns due to incorrect ordering by customer will be subject to re-stocking
charges as follows, unless waived by prior arrangement:
-within 7 days from invoice date, no charge
-7-30 days from invoice date - 10% value of the goods.
-30-60 days from invoice date - 20% value of the goods.
Disclaimer: Edgetec is not liable for any damages or costs incurred as a result of its product unless they
are operated and installed in accordance with the company’s specifications and recommendations.
Edgetec reserves the right to change specifications of any product without notice. Price of imported
products may fluctuate with exchange rates and may be adjusted without notice; this price list
supercedes all previous price lists.
Edgetec Systems Pty Ltd ABN.66 071 216 423
13 Lieber Grove, Carrum Downs,
Victoria, 3201, Australia
Tel (03) 9775 0882 Fax (03) 9775 0881
PRICE & TECHNICAL CATALOGUE JUNE 2010 – LIST PRICES DO NOT INCLUDE GST
ORDERS: FAX 03-9775-0881, PHONE 03-9775-0882 OR EMAIL sales@edgetec.net
Page 40