Cylindrical Roller Bearings - CONSOLIDATED BEARINGS ...

CYLINDRICAL ROLLER BEARINGS - HIGH CAPACITY *
Consolidated Dimensions Approx. Interchange
No. (Metric) Wgt. FAG
(lbs.) SKF
d D J** B STEYR ROLLWAY Torrington
NUP-203E 17 40 24.7 12 .190 NUP 203 E - NUP 203 E
NUP-204E 20 47 29.85 14 .300 NUP 204 E - NUP 204 E
NUP-205E 25 52 34.85 15 .380 NUP 205 E - NUP 205 E
NUP-206E 30 62 41.4 16 .560 NUP 206 E LP 1206 U NUP 206 E
NUP-207E 35 72 48 17 .810 NUP 207 E LP 1207 U NUP 207 E
NUP-208E 40 80 54.1 18 1.050 NUP 208 E LP 1208 U NUP 208 E
NUP-209E 45 85 59.1 19 1.210 NUP 209 E LP 1209 U NUP 209 E
NUP-210E 50 90 64.1 20 1.330 NUP 210 E LP 1210 U NUP 210 E
NUP-211E 55 100 70.95 21 1.750 NUP 211 E LP 1211 U NUP 211 E
NUP-212E 60 110 77.7 22 2.270 NUP 212 E LP 1212 U NUP 212 E
NUP-213E 65 120 84.55 23 2.970 NUP 213 E LP 1213 U NUP 213 E
NUP-214E 70 125 89.55 24 3.190 NUP 214 E LP 1214 U -
NUP-215E 75 130 94.5 25 3.460 NUP 215 E LP 1215 U -
NUP-216E 80 140 101.65 26 4.090 NUP 216 E LP 1216 U -
NUP-217E 85 150 107.6 28 5.170 NUP 217 E LP 1217 U -
NUP-218E 90 160 114.45 30 5.980 NUP 218 E LP 1218 U -
NUP-219E 95 170 120.65 32 7.400 NUP 219 E LP 1219 U -
NUP-220E 100 180 127.5 34 8.970 NUP 220 E LP 1220 U -
NUP-221E 105 190 134.75 36 9.970 NUP 221 E LP 1221 U -
NUP-222E 110 200 141.75 38 10.470 NUP 222 E LP 1222 U -
NUP-224E 120 215 153.45 40 14.670 NUP 224 E LP 1224 U -
NUP-226E 130 230 164.2 40 16.890 NUP 226 E LP 1226 U -
NUP-228E 140 250 180 42 21.330 NUP 228 E LP 1228 U -
NUP-230E 150 270 193.7 45 27.000 NUP 230 E LP 1230 U -
NUP-232E 160 290 207.35 48 38.230 NUP 232 E LP 1232 U -
NUP-234E 170 310 220.8 52 48.000 NUP 234 E LP 1234 U -
NUP-236E 180 320 230.8 52 50.000 NUP 236 E LP 1236 U -
NUP-238E 190 340 244.55 55 59.330 NUP 238 E LP 1238 U -
NUP-240E 200 360 258.2 58 68.890 NUP 240 E LP 1240 U -
* "E" suffix designates higher radial capacity derived by utilizing larger rollers.
** "J" dimension equal to FAG and SKF. Other manufacturers' "J" dimension may vary.
NOTE:
1.) The above series is available with either:
Stamped steel or glass fibre cage - No suffix.
Machined bronze cage - suffix "M".
J d
z240nup
2.) These bearings are available in C/2, C/3, C/4, W/23 and C/5 internal clearance.
3.) Some sizes are available in ABEC #3 (P/6) precision.
4.) This series has the same boundary dimensions as the equivalent Norma-Hoffman R-100-LL series.
The load carrying capacity of this series is greater than the comparable R-100-LL series.
B
D
161