Cylindrical Roller Bearings - CONSOLIDATED BEARINGS ...

CYLINDRICAL ROLLER BEARINGS - HIGH CAPACITY*
Consolidated Dimensions Approx. Interchange
No. (Metric) Wgt. FAG
(lbs.) SKF
d D B STEYR ROLLWAY Torrington
NJ-2304E 20 52 21 .540 NJ 2304E - NJ 2304E
NJ-2305E 25 62 24 .860 NJ 2305E - NJ 2305E
NJ-2306E 30 72 27 1.300 NJ 2306E - NJ 2306E
NJ-2307E 35 80 31 1.790 NJ 2307E - NJ 2307E
NJ-2308E 40 90 33 2.360 NJ 2308E - NJ 2308E
NJ-2309E 45 100 36 3.200 NJ 2309E - NJ 2309E
NJ-2310E 50 110 40 4.280 NJ 2310E L 2310 U NJ 2310E
NJ-2311E 55 120 43 5.450 NJ 2311E L 2311 U NJ 2311E
NJ-2312E 60 130 46 6.810 NJ 2312E L 2312 U -
NJ-2313E 65 140 48 8.180 NJ 2313E L 2313 U -
NJ-2314E 70 150 51 10.030 NJ 2314E L 2314 U -
NJ-2315E 75 160 55 12.170 NJ 2315E L 2315 U -
NJ-2316E 80 170 58 14.480 NJ 2316E L 2316 U -
NJ-2317E 85 180 60 16.820 NJ 2317E L 2317 U -
NJ-2318E 90 190 64 20.020 NJ 2318E L 2318 U -
NJ-2319E 95 200 67 23.150 NJ 2319E L 2319 U -
NJ-2320E 100 215 73 29.320 NJ 2320E L 2320 U -
NJ-2322E 110 240 80 41.000 NJ 2322E L 2322 U -
NJ-2324E 120 260 86 51.150 NJ 2324E L 2324 U -
NJ-2326E 130 280 93 64.150 NJ 2326E L 2326 U -
NJ-2328E 140 300 102 80.470 NJ 2328E L 2328 U -
NJ-2330E 150 320 108 96.780 NJ 2330E L 2330 U -
NJ-2332E 160 340 114 115.080 NJ 2332E L 2332 U -
NJ-2334E 170 360 120 137.780 NJ 2334E L 2334 U -
NJ-2336E 180 380 126 160.050 NJ 2336E L 2336 U -
NJ-2338E 190 400 132 187.170 NJ 2338E L 2338 U -
NJ-2340E 200 420 138 215.610 NJ 2340E L 2340 U -
NJ-2344E 220 460 145 266.760 NJ 2344E L 2344 U -
*"E" suffix designates higher radial load capacity derived by utilizing larger rollers.
NOTE:
1.) The above series is available with either:
Stamped steel or glass fibre cage - No suffix.
Machined bronze cage - suffix "M".
2.) These bearings are available in C/2, C/3, C/4, W/23 and C/5 internal clearance.
3.) Some sizes are available in ABEC #3 (P/6) precision.
4.) For NH-2300E Series combine NJ-2300E Bearing with HJ-2300E Angle Ring. Example: NJ-2315E and HJ-2315E = NH-2315E.
d
B
z240nj
D
179