Induction Motors

More documents

Recommendations

Info

Standard AC Motors 1/750 HP 1 W 1/125 HP 6 W 1/50 HP 15 W 1/30 HP 25 W Product Number Codes World K Series 5 I K 40 GN - AW T U Motor Series K: K series Motor Type I : Induction motor Output Power (Example) 40: 40 W Motor Frame Size 2: 2.36 in. sq. (60 mm sq.) 3: 2.76 in. sq. (70 mm sq.) 4: 3.15 in. sq. (80 mm sq.) 5: 3.54 in. sq. (90 mm sq.) Included Capacitor U: For Single-Phase 110/115 VAC E: For Single-Phase 220/230 VAC None: Three-Phase type T: Terminal Box Type Voltage and No. of Poles AW: Single-Phase 100/110/115 VAC, 4 Poles CW: Single-Phase 200/220/230 VAC, 4 Poles SW: Three-Phase 200/220/230 VAC, 4 Poles Motor Shaft Type GN: Pinion shaft (for use with GN-type gearhead) GU: Pinion shaft (for use with GU-type gearhead) A : Round shaft Note: ● The "U" and "E" at the end of the model number indicate that the unit includes a capacitor. These two letters are not listed on the motor nameplate. World K Series and K Series Gearheads 5 GN 50 KA Type of Bearings and Shaft Type KA: Ball Bearing Type (inch-size) RAA: Right Angle Solid Shaft Type (inch size) RH: Right Angle Hollow Shaft Type Gear Ratio (Example) 50: Gear ratio of 50:1 10X denotes the decimal gearhead of gear ratio 10:1 Gearhead Type GN: GN type (for use with GN-type pinion shaft motor) GU: GU type (for use with GU-type pinion shaft motor) Gearhead Frame Size 0: 1.65 in. sq. (42 mm sq.) 2: 2.36 in. sq. (60 mm sq.) 3: 2.76 in. sq. (70 mm sq.) 4: 3.15 in. sq. (80 mm sq.) 5: 3.54 in. sq. (90 mm sq.) 1/19 HP 40 W 1/12 HP 60 W K Series ◆ 1 W Type, 2-Pole Type 5 I K 90 A - B F UL ◆ Conduit Box Type 5 I K 40 GN - F C H 1/8 HP 90 W 1/4 HP 200 W 1/19-1/8 HP 40-90 W (2-Pole) Output Power (Example) 90: 90 W Motor Series K: K series Motor Type I: Induction motor Motor Frame Size 0: 1.65 in. sq. (42 mm sq.) 4: 3.15 in. sq. (80 mm sq.) 5: 3.54 in. sq. (90 mm sq.) UL: UL recognized and CSA ✽ , VDE certified ✽ Only 1 W Type F: With built-in cooling fan Voltage and No.of Poles A: Single-Phase 115 VAC, 4 Poles B: Single-Phase 115 VAC, 2 Poles Motor Shaft Type GN: Pinion shaft (for use with GN-type gearhead) A : Round shaft ✽ If the product code number ends with “A”, this indicates an inch size shaft motor. Motor Series K: K series Motor Type I: Induction motor Output Power (Example) 40: 40 W Motor Frame Size 4: 3.15 in. sq. (80 mm sq.) 5: 3.54 in. sq. (90 mm sq.) H: Conduit Box Type C: With capacitor Voltage F: Single-phase 110/115 VAC E: Single-phase 220/230 VAC S: Three-phase 200/220/230 VAC Motor Shaft Type GN: Pinion shaft (for use with GN-type gearhead) GU: Pinion shaft (for use with GU-type gearhead) A, AA: Round shaft V Series V H I 5 40 A T - 300 U BH Series BH I 6 2 F T - 5 RH Motor Series V: V Series High Power Motor Type I: Induction motor Motor Frame Size 2: 2.36 in. sq. (60 mm sq.) 3: 2.76 in. sq. (70 mm sq.) 4: 3.15 in. sq. (80 mm sq.) 5: 3.54 in. sq. (90 mm sq.) Included Capacitor U: For Single-Phase 110/115 VAC E: For Single-Phase 220/230 VAC None: Three-Phase type Gear Ratio (Example) 300: Gear Ratio of 300:1 T: Terminal Box Type Voltage A: Single-Phase 100/110/115 VAC C: Single-Phase 200/220/230 VAC S: Three-Phase 200/220/230 VAC Output Power (Example) 40: 40 W Note: ● The "U" and "E" at the end of the model number indicate that the unit includes a capacitor. These two letters are not listed on the motor nameplate. Output Power 2: 200 W Motor Frame Size 6: 4.09 in. sq. (104 mm sq.) Motor Type I: Induction motor BH Series Number: Gear Ratio A: Round Shaft Type T: Terminal Box Type None: Cable Type Voltage F: Single-Phase 110/115 VAC E: Single-Phase 220/230 VAC S: Three-Phase 200/220/230 VAC RH: Right-Angle Hollow Shaft RA: Right-Angle Solid Shaft A-16 ORIENTAL MOTOR GENERAL CATALOG 2003/2004
General Specifications World K Series, V Series, K Series (Conduit Box Type) Item Specifications 100 MΩ or more when 500 VDC is applied between the windings and the frame after rated motor operation under normal ambient Insulation Resistance temperature and humidity. Sufficient to withstand 1.5 kV at 50 Hz and 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under Dielectric Strength normal ambient temperature and humidity. Temperature rise of windings are 144˚F (80˚C) or less measured by the resistance change method after rated motor operation with Temperature Rise connecting a gearhead or equivalent heat radiation plate ✽ . [Three-Phase 6 W type : 126˚F (70˚C)] Insulation Class Class B (266˚F [130˚C]) 6 W type have impedance protection. All others have built-in thermal protector (Automatic return type) Overheat Protection Operating temperature, open : 266˚F9˚F (130˚C5˚C) close: 179.6˚F27˚F (82˚C15˚C) Ambient Temperature Range 14˚F104˚F (10˚C40˚C) [Three-phase 200 VAC: 14˚F122˚F (10˚C50˚C)] (nonfreezing) Ambient Humidity 85% maximum (noncondensing) Degree of Protection ✽ Heat radiation plate (material: Aluminum) Type (output) 2IK Type (6 W) 3IK Type (15 W) 4IK Type (25 W) 5IK40 Type (40 W) 5IK60 Type (60 W) 5IK90 Type (90 W) K Series Item Insulation Resistance Lead wire type (World K Series, V Series) : IP 20 Terminal box type (World K Series, V Series) : 25 W, 40 W IP 54 60 W, 90 W IP 44 Size: in. (mm) 4.534.53 (115115) 4.924.92 (125125) 5.315.31 (135135) 6.506.50 (165165) 7.877.87 (200200) 7.877.87 (200200) Thickness: in. (mm) 0.20 (5) Specifications 100 MΩ or more when 500 VDC is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. Standard AC Motors Induction Reversible Introduction Motors Motors Synchronous Motors Torque Motors Watertight Motors Magnetic Brake Clutch & Brake Dielectric Strength Temperature Rise Insulation Class Overheat Protection Ambient Temperature Range Ambient Humidity Degree of Protection BH Series Item Insulation Resistance Sufficient to withstand 1.5 kV at 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. Temperature rise of windings are 135˚F (75˚C) or less measured by the resistance change method after rated motor operation. Class A (221˚F [105˚C]) (0IK1GN-AUL, 0IK1A-AUL, 5IK90A-BFUL: UL/CSA Standards···Class A, EN Standards···Class E) 1 W type is impedance protected. All others have built-in thermal protector (Automatic return type) Operating temperature, open: 248˚F9˚F (120˚C5˚C) close: 170.6˚F27˚F (77˚C15˚C) 14˚F104˚F (10˚C40˚C) (nonfreezing) 85% maximum (noncondensing) IP20 Specifications 100 MΩ or more when 500 VDC is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. Brake Pack Before Using Right-Angle a Standard Gearheads Accessories AC Motor Dielectric Strength Temperature Rise Insulation Class Overheat Protection Ambient Temperature Range Ambient Humidity Degree of Protection Sufficient to withstand 1.5 kV at 50 Hz and 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. Temperature rise of windings are 144˚F (80˚C) or less measured by the resistance change method after rated motor operation with connecting a gearhead or equivalent heat radiation plate ✽ . [Three-Phase type: 126˚F (70˚C)] Class B (266˚F [130˚C]) Built-in thermal protector (Automatic return type) Operating temperature, open : 302˚F9˚F (150˚C5˚C) close : 204.8˚F27˚F (96˚C15˚C) 14˚F104˚F (10˚C40˚C) [Three-Phase 200 VAC: 14˚F122˚F (10˚C50˚C)] (nonfreezing) 85% maximum (noncondensing) Cable Type: IP40 Terminal Box Type: IP54 ✽ Heat radiation plate: 9.06 inch9.06 inch (230 mm230 mm), 0.20 inch (5 mm) thickness (Material: Aluminum) ORIENTAL MOTOR GENERAL CATALOG 2003/2004 A-17
Page 1 and 2: Standard AC Motors Introduction Ind
Page 3: K Series Standards Certification Bo
Page 7 and 8: Dimensions Scale 1/4, Unit = inch (
Page 9 and 10: Gearmotor — Torque Table World K
Page 11 and 12: V Series ◆ Lead Wire Type VHI206A
Page 15 and 16: Capacitor (included with the motors
Page 19 and 20: ◆ Conduit Box Type Gearhead Motor
Page 21 and 22: Capacitor (included with single-pha
Page 33 and 34: ◆ Terminal Box Type VHI560AT-U, V
Page 35 and 36: Induction Motors 90 W (1/8 HP) Fram
Page 39 and 40: Round Shaft Type 5IK90A-FCH 5IK90A-
Page 43 and 44: Round Shaft Type Type Power Supply
Page 47 and 48: ◆ Combination Type Right-Angle, H
Page 49 and 50: ◆ Combination Type, Parallel Shaf
Page 51 and 52: Connection Diagrams Motor Type Cabl
Page 53 and 54: 2-Pole, High Speed Type Induction M

Induction Motors

Create successful ePaper yourself

Delete template?

Save as template?