brand

2013 

North America, Latin America 

& Asia Pacific 

Effective January 1, 2013 

Supersedes all previous issues 

• INCREMENTAL 

• ABSOLUTE 

E N C O D E R S 

PRICE LIST 

ACURO TM brand 

Dynapar TM brand 

NorthStar TM brand 

What's Inside: 

ACURO brand Encoders, Table of Contents ..........................................Page 1 

Dynapar brand Encoders, Table of Contents .........................................Page 1 

NorthStar Encoders, Table of Contents .................................................Page 3 

Pricing Information............................................ Inside Front Cover - Page C2 

Terms and Conditions ......................................... Inside Rear Cover - Page C3 

INNOVATION - CUSTOMIZATION - DELIVERY 

1.800.873.8731 

www.dynapar.com

Pricing Information 

PRICE LIST CONTENTS 

Dynapar brand, Encoders Table of Contents ....................... Page 1 

ACURO brand, Encoders Table of Contents ........................ Page 1 

NorthStar brand, Encoders Table of Contents .................... Page 3 

Pricing Information .......................... Inside Front Cover - Page C2 

Terms and Conditions ....................... Inside Rear Cover - Page C3 

HOW TO USE THIS PRICE LIST 

This publication provides price and availability information as a 

supplement to Danaher Sensors & Controls’ encoder catalog. Refer to 

the catalog pages for complete product specifications, features, 

application information, etc., and to specify the model numbers that 

meet your application requirements. The Encoder Pricing Section of 

this publication can be used to specify and determine prices for 

custom models of encoders. All prices in US Dollars. 

MINIMUM ORDER VALUE 

Orders with a total value of less than US$50.00 net cannot be 

accepted. 

RETURNS POLICY 

The "RC" column of this price list designates product return policy: 

"R": returnable if of current design and in original packaging 

"N": nonreturnable except under warranty. 

Returned products will be subject to a 25% restocking Charge. 

SHIPPING ORIGIN 

Products are shipped from point of manufacture. 

ORDERING METHODS 

This price list includes complete model numbers and list prices for a 

wide selection of products that should meet most of your application 

requirements. Some encoder products, however, are available with a 

more complex combination of features. In these cases, refer to the 

Encoder Pricing Section for determining the specific part number 

required. Cost is then determined by adding listed option charges to 

the series base price. 

PRODUCT AVAILABILITY 

The "LT" (Lead Time Days) content of this price list shows the number 

of working-days typically required to ship a product in 1 to 5 piece 

quantity. 

Expedited shipment is possible for products listed as having 3 or 5 day 

standard lead time. This service is subject to a Guaranteed Expedited 

Shipment Adder, plus shipping carrier charges and delivery commitment. 

Your request for Same-Day, Next-Day, or Second-Day (business 

days), or other deviation from standard lead time may be submitted to 

a Dynapar Customer Service Representative who will coordinate your 

requested shipment with our manufacturing department and confirm 

availability of expedite. The quantity of each item, and/or the number 

of differing items ordered, may effect the ability to satisfy the request. 

In some instances, expedited shipment is possible for products listed 

with greater than 5 day standard lead time. Please consult Customer 

Service for availability. 

When the order and shipment details are resolved the order may be 

placed and subject to our Expedited Shipment Guarantee. In the event 

that Dynapar fails to meet the guaranteed shipment commitment, the 

expedite fee will be waived. In the event that items are returned for 

refund, the fee will not be refunded. 

The Expedited Shipment Adder is calculated using the variables 

shown in the following table. 

EXPEDITED SHIPMENT RELATIVE TO ORDER ENTRY DATE 

Standard 

Lead Time 

Day of Order 

(Same Day) 

Order Received 

by 10:00AM CST 

Day 1 

(Next Day) 

Day 2 

(2nd Day) 

Day 3 Day 4 

Order Received by 4:00PM CST 

Day 5 

3 Days 

$150.00* 

$150.00* 

$75.00* 

$0 

– 

– 

5 Days 

$150.00* 

$150.00* 

$75.00* 

$30.00 

$30.00 

$0 

*Note: orders for cables only = $30.00 for Same Day or Next Day expedite. 

C2 

Prices subject to change without notice

Table of Contents 

Worldwide Brands: 

Worldwide Brands: Veeder-Root Dynapar Eagle Signal 

SEE ENCODER CATALOG FOR COMPLETE TECHNICAL INFORMATION 

Encoder part numbers and prices are created by combining a “Base Price” with a combination of desired features and options. The tables on the following pages are used to configure the exact encoder to best fulfil your 

application requirements. Some features cannot be combined and are so indicated in the tables. Consult Customer Service regarding any items which are not listed. 

Absolute, Incremental & Motor Mount Encoder Table of Contents 

ACURO BRAND ABSOLUTE ENCODERS 

ABSOLUTE SERIES 

SERIES AD34 ABSOLUTE ENCODER ...................................................................................................... 4 



SERIES AC36 ABSOLUTE ENCODER ...................................................................................................... 7 

SERIES AC110 ABSOLUTE ENCODER ...................................................................................................... 8 

SERIES AR62/AR63 ABSOLUTE ENCODER ...................................................................................................... 9 

SERIES AX70/AX71 ABSOLUTE ENCODER .................................................................................................... 10 

SERIES AI25 DEVICENET INTERFACE ABSOLUTE ENCODER ............................................................. 11 

SERIES AI25 PROFIBUS ABSOLUTE ENCODER .................................................................................. 12 

SERIES AI25 INTERBUS ABSOLUTE ENCODER .................................................................................. 13 

SERIES AI25 SSI ABSOLUTE ENCODER .............................................................................................. 14 

SERIES AI25 BISS ABSOLUTE ENCODER ........................................................................................... 15 

SERIES AI25 PARALLEL ABSOLUTE ENCODER .................................................................................. 16 

SERIES AD25 DRIVE ABSOLUTE ENCODER ......................................................................................... 17 

DYNAPAR BRAND INCREMENTAL ENCODERS 

COMMERCIAL - LIGHT DUTY 

SERIES E12 SIZE 12, LIGHT DUTY ENCLOSED ENCODERS .............................................................. 18 

SERIES E14 SIZE 14, LIGHT DUTY ENCLOSED ENCODERS .............................................................. 18 

SERIES E23 SIZE 23 COMPACT ENCLOSED ENCODERS ................................................................... 19 

SERIES EC23 SIZE 23 COMPACT ENCLOSED ENCODERS ................................................................... 20 

SERIES PC9 SHORT DEPTH PANELCODER ........................................................................................ 20 

INDUSTRIAL - DUTY 

SERIES 22 NEXGEN QUBE ENCODERS ......................................................................................... 21 

SERIES H20 SIZE 20 ENCODERS ...................................................................................................... 22 

SERIES H42 SIZE 25 ECONOMICAL ENCODERS ................................................................................ 23 

SERIES H58 58MM DIA ENCODERS.................................................................................................. 23 

SERIES HA25 SIZE 25 ENCODERS ...................................................................................................... 24 

SERIES HC25 SIZE 25 ENCODERS ...................................................................................................... 25 

SERIES HR25 SIZE 25 ENCODERS ...................................................................................................... 26 

SERIES HA725 HIGH RESOLUTION ENCODERS..................................................................................... 27 

SERIES 60 ROTOPULSER® ENCODERS .......................................................................................... 29 

SERIES 60P ROTOPULSER® ENCODERS .......................................................................................... 30 

DYNAPAR BRAND MODULAR ENCODERS & ACCESSORIES 

M602/832 ROTARY MODULES ........................................................................................................ 99 

CERTIFICATION & ADDERS FOR ROTARY ENCODERS .............................................................................................. 99 

AB, ABZ LINEAR ENCODERS ..................................................................................................... 100 

SCALES SCALES FOR LINEAR ENCODERS ................................................................................ 100 

† 

Lead time (Days): Lead times are in business days for shipments of 1 to 5 pieces. Items marked with a 3 -5 day lead time may be available for rush shipment under our Guaranteed Expedited 

Shipment program. See Page C2 inside front cover or contact Customer Service for details. CF indicates consult factory for lead time. Lead times shown are typical and may vary as 

influenced by factory workload conditions. Minimum Net Order: $50 Currency: Prices in US$. Shipment Origin: Point of manufacture. 

Prices subject to change without notice 

1





Absolute, Incremental & Motor Mount Encoder Table of Contents 

DYNAPAR BRAND INCREMENTAL ENCODERS (CONTINUED) 

MOTOR MOUNT - COMMERCIAL - LIGHT DUTY 

SERIES E9 0.9" MINIATURE ENCODERS .......................................................................................... 31 

SERIES E14HS SIZE 14 HUB SHAFT ENCODERS ................................................................................... 32 

SERIES E14IC SIZE 14 INTEGRAL COUPLING ENCODERS ................................................................... 33 

SERIES M9 0.9" MINIATURE ENCODERS .......................................................................................... 34 

SERIES M14 1.5" INCREMENTAL MODULAR MINIATURE ENCODERS............................................... 35 

SERIES M15 SIZE 15 COMMUTATING MODULAR ENCODERS ........................................................... 36 

SERIES M53 SIZE 20 COMMUTATING MODULAR ENCODERS ........................................................... 37 

SERIES F10 SIZE 10 COMMUTATING ENCODERS ............................................................................. 38 





SERIES HC20 COMMUTATING ENCODERS .......................................................................................... 43 

MOTOR MOUNT - INDUSTRIAL DUTY 

SERIES H20HS SIZE 20 ENCODER W/HUB SHAFT ................................................................................. 44 

SERIES HS20 SEALED HOLLOWSHAFT ENCODERS ............................................................................ 45 

SERIES HS35 SEALED HOLLOWSHAFT ENCODERS ............................................................................ 46 

SERIES HS35R SEALED HOLLOWSHAFT ENCODERS ............................................................................ 47 

SERIES HA26/526 SIZE 25 ENCODERS ....................................................................................................... 48 

SERIES HR26/526 SIZE 25 ENCODERS ....................................................................................................... 49 

SERIES HC26/526 SIZE 25 ENCODERS ....................................................................................................... 50 

SERIES R45 MOTOR MOUNT RING ROTOPULSER®, FOR NEMA 4-1/2 C-FACE MOTORS............... 51 

EXPLOSION PROOF - HEAVY DUTY 

SERIES X25 EXPLOSION PROOF ENCODER ...................................................................................... 51 

DYNAPAR BRAND SPARE PARTS & ACCESSORIES 

SERIES 53Z, 53ZK PICKUPS & SENSORS ................................................................................................................. 52 - 55 

SHAFT COUPLINGS ................................................................................................................................ 52 - 55 

MEASURING WHEELS ................................................................................................................................ 52 - 55 

CABLES & CONNECTORS ................................................................................................................................ 52 - 55 

BRACKETS & ADAPTERS ................................................................................................................................ 52 - 55 

FEEDBACK ACCESSORY AND CONVERTERS ............................................................................................................. 52 - 55 

† 




2 




Worldwide Brands: Veeder-Root Dynapar Eagle Signal 




Heavy Duty Incremental Encoders & Pulse Tachs Table of Contents 

NORTHSTAR BRAND HEAVY-DUTY MAGNETO-RESISTIVE & OPTICAL ENCODERS 

HEAVY-DUTY 

SERIES H56 ROTOPULSER® HEAVY DUTY ENCODERS ................................................................... 28 

SERIES HS56 SLIM TACH ENCODERS, SINGLE OUTPUT .................................................................... 57 

SERIES HS56 SLIM TACH ENCODERS, DUAL OUTPUT ....................................................................... 58 

SERIES HS60 SERIES 60 HOLLOWSHAFT ENCODER .......................................................................... 59 

SERIES HD20 HEAVY DUTY ENCODER ................................................................................................. 60 

SERIES HD25 HEAVY DUTY ENCODER ................................................................................................. 62 

SERIES HD35R HEAVY-DUTY, IEC FLANGE ENCODERS ......................................................................... 69 

SERIES DWD38 DRAW WORKS ENCODER .............................................................................................. 70 

SERIES HSD25 HEAVY-DUTY, HUB SHAFT ENCODERS .......................................................................... 64 

SERIES HSD35 HEAVY-DUTY, HOLLOWSHAFT ENCODERS ................................................................... 56 



SERIES RL67 SLIM TACH ENCODERS ................................................................................................. 74 

SERIES SL1250 SLIM TACH ENCODERS, SINGLE OUTPUT ................................................................... 75 

SERIES SL1250 SLIM TACH ENCODERS, DUAL OUTPUT ....................................................................... 76 

SERIES SL56 SLIM TACH ENCODERS, SINGLE OUTPUT .................................................................... 77 


SERIES SL85 SLIM TACH ENCODERS, SINGLE OUTPUT ................................................................... 79 


MILL-DUTY 

SERIES 1250 NEXGEN RIM TACH ........................................................................................................ 81 

SERIES 1250 RIM TACH ...................................................................................................................... 82 





SERIES HS85 RIM TACH ...................................................................................................................... 87 

HAZARDOUS/HARSH ENVIRONMENT DUTY 

SERIES EN42 ATEX ZONE 1 BARRIER-LESS HOLLOWSHAFT ENCODER ............................................ 73 

SERIES EN44 ATEX ZONE 1 BARRIER-LESS HOLLOWSHAFT ENCODER ............................................ 73 

ATEX SERIES HD20 ATEX INTRINSICALLY SAFE ENCODER .......................................................................... 61 

ATEX SERIES HD25 ATEX INTRINSICALLY SAFE ENCODER .......................................................................... 63 

SERIES ISD25 ATEX INTRINSICALLY SAFE ENCODER .......................................................................... 65 

SERIES ISD37 ATEX INTRINSICALLY SAFE ENCODER .......................................................................... 67 

SERIES ISW38 ATEX INTRINSICALLY SAFE ENCODER .......................................................................... 71 

SERIES HSD44 HEAVY DUTY HOLLOWSHAFT ENCODER ...................................................................... 72 

SERIES X25 EXPLOSION PROOF ENCODER (DYNAPAR) .................................................................. 51 

SHAFT-LESS HEAVY DUTY 

HDP18 18MM THREADED BODY SHAFT-LESS ENCODER ......................................................... 88 

HDP30 30MM THREADED BODY SHAFT-LESS ENCODER ......................................................... 89 

HDN58 SHAFT-LESS ENCODER .................................................................................................. 90 

NORTHSTAR BRAND SPARE PARTS & ACCESSORIES 

SLIM TACH SPARE PARTS ................................................................................................................................ 91 - 98 

RIM TACH SPARE PARTS ................................................................................................................................ 91 - 98 

HD/HSD ACCESSORIES ................................................................................................................................ 91 - 98 

ACCESSORY INSTRUMENTS ................................................................................................................................ 91 - 98 

† 





3

and 

Series AD34 


DC =HI; RC = N 

† Lead Time (Days) = 20 Encoder Catalog 

Code 1: 

Model 

Code 2: 

Resolution 

Code 3: 

Voltage 

Code 4: 

Mounting 

Code 5: 

Protection 

Code 6: 

Shaft Size 

Code 7: 

Interface 

Code 8: 

Connection 

Ordering Information 

AD34 

0 

N 

Acuro Series 

AD34 Absolute 

Encoder 

0012 

0013 

0014 

0017 

Available if Code 7 

= BI or BC 

A 5 VDC 

E 7-30VDC 

U Standard 

Spring Tether 

F Inverse 

Tether 

0 IP40 

N 6mm Notched 

Shaft 

BI 

BC 

SB 

SC 

SG 

BiSS 

BiSS +1Vp-p 

SSI-Binary 

SSI Gray+1Vp-p 

SSI-Gray 

0 12 Pole pinheader 

B .5m Radial cable 

0019 


AD34 

Base Price 

$303.00 

0012 N/C 

0013 add $107.00* 

0014 add $161.00* 

0017 add $321.00* 

0019 add $536.00 

*0012 thru 0017 is 

N/C when Code 7= 

BI or BC) 

A N/C 

E add $10.00 

U N/C 

F N/C 

0 N/C 

N N/C 

BI N/C 

BC N/C 

SB add $54.00 

SC add $54.00 

SG add $54.00 

0 N/C 

B add $5.00 

† 




4 



Series AD35 

 

Veeder-Root brand Dynapar Eagle Signal 


DC = HI; RC = N 


Code 1: Model Code 2: Resolution Code 3: Voltage Code 4: Flange/Protection/Shaft Code 5: Interface Code 6: Connection 

AD35 . 

AD35 

ACURO 

Absolute 

Encoder 

0012 12 Bit ST 

0013 13 Bit ST 

0014 14 Bit ST 

0017 17 Bit ST 

0019 19 Bit ST (BiSS) 

A 

E 

5 VDC* 

7-30 VDC 

* No Inverse 

polarity 

protection 

F O R 

F.OR Optional, Spring 

Tether, IP40, 8mm Hub 

Shaft 

BI BiSS-B 

BC BiSS-B (+Sin Cos 1Vpp) 

SG SSI Gray 

SC SSI Gray (+Sin Cos 1Vpp) 

BE BiSS-C 

BV BiSS-C (+Sin Cos 1Vpp) 

0 PCB Connector, 

Axial,12 pole 

2 PCB Connector, 

Radial,12 pole 

A PCB Connector, 

Axial,12 pole with 

Mating Connector and 

0.5 m Cable 

B PCB Connector, 

Radial,12 pole with 


0.5 m Cable 


AD35 

Base Price 

$331.00 

0012 N/C 

0013 add $107.00* 

0014 add $161.00* 

0017 add $321.00* 

0019 add $536.00 

A N/C 

E add $10.00 

N/C BI N/C 

BC N/C 

SC add $54.00 

SG add $54.00 

BE N/C 

BV N/C 

0 N/C 

2 N/C 

A add $5.00 

B add $5.00 

*0012 thru 0017 is 

N/C when Code 5 = 

BI or BC) 

† 





5

and 

Series AD36 




Code 1: Model Code 2: Resolution Code 3: Voltage Code 4: Flange/Protection/Shaft Code 5: Output Code 6: Connection 

AD36 . 

AD36 

ACURO 

Absolute 

Encoder 

0012 12 Bit ST 

0013 13 Bit ST 

0014 14 Bit ST 

0017 17 Bit ST 

0019 19 Bit ST (Biss) 

1212 12 Bit MT+12 Bit ST 




1219 12 Bit MT+19 Bit ST (Biss) 

A 

E 

5 VDC* 

7-30 VDC 

* No Inverse 

polarity 

protection 

F.OC Optional, Spring 

Tether, IP40, 8mm 

Through Hollow Shaft 

F.OR Spring Tether, IP40, 

8mm Hub Shaft 

BI 

BC 

SG 

SC 

BE 

BV 

BiSS-B 

BiSS-B 

(+SinCos 

1Vpp) 

SSI Gray 

SSI Gray 

(+SinCos 

1Vpp) 

BiSS-C 

BiSS-C 

(+SinCos 

1Vpp) 

0 PCB Connector, 12 pole 

A PCB connector, 

axial,12 pole with 

mating connector 

and 0.5 m cable 

B PCB Connector, 

Radial,12 pole with 


0.5 m Cable 


AD36 

Base Price 

$406.00 

0012 N/C 

0013 add $107.00 

0014 add $161.00 

0017 add $321.00 

0019 add $536.00 

1212 add $321.00 

1213 add $371.00 

1214 add $385.00 

1217 add $536.00 

1219 add $750.00 

A N/C 

E add $10.00 

N/C BI N/C 

BC N/C 

SC add $54.00 

SG add $54.00 

BE N/C 

BV N/C 

0 N/C 

A add $5.00 

B add $5.00 

† 




6 



 



Series AC36 DC = HI RC = N 


Code 1: 

Model 

AC36 

ACURO 

Series AC36 

Absolute 

Encoder 

Code 2: 

Resolution 

0012 

0013 

0014 

0017 


= BI 

0019 

0022 

Code 3: 

Supply Voltage 

A 5 VDC 

E 7-30 

VDC 

Code 4: 

Mounting 

Code 5: 

Protection Class 


R Round 

Flange 

4 IP 64 

Code 6: 

Shaft Size 

1 6mm 

Code 7: 

Interface 

BI BISS 

SB SSI Binary 

SC SSI Gray 

+ sin/cos 

1Vpp 

SG SSI Gray 

A 

B 

E 

F 

Code 8: 

Connection 

Cable, axial, 1.5m, 12 pole 

Cable, radial, 1.5m, 12 pole 

Cable, axial, 1.5m, 6 pole 

Cable, radial, 1.5m, 6 pole 

1212 

1213 

1214 

1217 


= BI 

1219 

1222 


AC36 

Base Price 

$406.00 

0012 N/C 

0013 add $107.00 

0014 add $161.00 

0017 add $321.00 

0019 add $536.00 

0022 add $750.00 

1212 add $321.00 

1213 add $385.00 

1214 add $385.00 

1217 add $536.00 

1219 add $750.00 

1222 add $964.00 

A N/C 

E N/C 

R N/C 4 N/C 1 N/C BI N/C 

SB N/C 

SC add 

$54.00 

SG add 

$54.00 

A 

B 

E 

F 

N/C 

N/C 

N/C 

N/C 

† 





7

and 


Series AC110 DC = HI RC = N 


Code 1: 

Model 

AC110 

Code 2: 

Resolution 

Code 3: 

Supply Voltage 

Code 4: 

Spring Tether 

Code 5: 


Code 6: 

Shaft Mounting 

Code7: 

Shaft Size 

Code 8: 

Interface 

Code 9: 

Connection 

Code 10: 

Cable Length 


ACURO 

Series AC110 

Absolute 

Encoder 

0011 

0012 

0013 

0014 

0017 

0019 

0022 

A 5 VDC 

E 10-30 

VDC 

0 None 

B 

With 

Spring 

Tether 

0 IP 40 

1 IP 50 

4 IP 64 

K Keyway 

4 x 1.2 

H Clamping 

Ring 

50 50mm 

SB 

SG 

BI 

SSI Binary 

SSI Gray 

BISS 

B 

Cable, 

radial, 

1.5m 

B5 1.5m 

D0 3m 

F0 5m 

K0 10m 


AC110 

Base Price 

$812.00 

0011 

add $0.00 

0012 

add $54.00 

0013 

add $107.00 

0014 

add $161.00 

0017 

add $365.00 

0019 

add $536.00 

0022 

add $750.00 

A N/C 

E N/C 

0 N/C 

B add 

$49.00 

0 N/C 

1 N/C 

4 add 

$37.00 

K 

H 

add 

$54.00 

N/C 

50 N/C SB N/C 

SG N/C 

BI N/C 

B N/C B5 N/C 

D0 add 

$26.00 

F0 add 

$43.00 

K0 add 

$86.00 

† 




8 



 



Series AR62/AR63 


† Lead Time (Days) = 30 Encoder 

Catalog 

Code 1: 

Model 

Code 2: 

Resolution 

Code 3: 

Voltage 

Code 4: 

Mounting 

Code 5: 

Protection 

Code 6: 

Shaft Size 

Code 7: 

Interface 

Code 8: 

Connection 

Code 9: 

Cable Length 


AR62 

1 2 

AR62 

Aluminum 

AR63 

Stainless 

0012 

1212 

1312 

1612 

A 5 VDC 

E 10-30VDC 

F 17-30VDC 

L 

Synchro, 

Clamping 

Q Square 

Flange 

7 IP67 

9 IP69k 

2 10mm 

“2” is 

available 

only when 

Code 4 is L 

6 3/8" 

“6” is 

available 

only when 

Code 4 is Q 

BI BiSS 

SB SSI-Binary 

SG SSI-Gray 

OL CAN Open 

Available only when 

Code 2 is 0012, 

1212, or 1612 

AV Analog, 0-10V 

A4 Analog, 4-20mA 

B Radial Cable 

Available when 

Code 1 is 

AR62 and 

code 5 is 7 

8 M12 radial 

connector, 

8-pin 

Blank 1.5m 

D0 3m 

F0 5m 

K0 10m 

P0 15m 

U0 20m 

V0 25m 

W0 30m 

X0 40m 

Y0 50m 


Base Price 

0012 N/C 

A N/C 

L 

N/C 

7 N/C 

2 N/C 

BI N/C 

B N/C 

Blank 

N/C 

AR62 

$552.00 

AR63 

$993.00 

1212 add 

$161 

1312 add 

$161 

1612 add 

$187 

E 

F 

N/C 

N/C 

Q Add $54.00 

9 add 

$54.00 

6 N/C 

SB N/C 

SG N/C 

OL add $97.00 

AV N/C 

A4 N/C 

8 N/C 

(N/A with 

Stainless or 

IP69k) 

D0 add $27.00 

F0 add $27.00 

K0 add $56.00 

P0 add $80.00 

U0 add $102.00 

V0 add $124.00 

W0 add $198.00 

X0 add $295.00 

Y0 add $397.00 

† 





9

and 


Series AX70/AX71 



Code 1: 

Model 

Code 2: 

Resolution 

Code 3: 

Voltage 

Code 4: 

Mounting 

Code 5: 


Code 6: 

Shaft Size 

Code 7: Interface 

Code 8: 

Connection 

Code 9: 

Cable Length 


AX70 

Acuro Series 

AX70 and 

AX71 

(Stainless) 

Harsh-Duty 

Absolute 

Encoder 

Single-Turn 

0010 

0012 

0013 

0014 

0017 

0022 

Multi-Turn 

1212 

1213 

1214 

1217 

A 5 VDC 

E 10-30VDC 

K Clamping 

Flange 

4 IP64 

7 IP67 

2 10mm 

SB SSI-Binary 

SG SSI-Gray 

SP SSI-Programmable 

DP Profibus DP 

VD DeviceNet 

CL CAN-L2 

OL CAN-Open 

A Axial Cable 

F0 

K0 

P0 

U0 

V0 

5m 

10m 

15m 

20m 

25m 


AX70 

Single-Turn 

A N/C 

K N/C 

4 N/C 

2 N/C 

SB 

N/C 

A N/C 

F0 

N/C 

Base Price 

$2159.00 

AX71 

Base Price 

$2981.00 

0010 N/C 

0012 add $80.00 

0013 add $107.00 

0014 add $284.00 

0017 add $825.00 

0022 add $1724.00 

Multi-Turn 

E N/C 

7 add $129.00 

SG N/C 

SP add $263.00 

DP add $263.00 

VD add $263.00 

CL add $263.00 

OL add $263.00 

K0 add $75.00 

P0 add $139.00 

U0 add $214.00 

V0 add $284.00 

1212 add $611.00 

1213 add $638.00 

1214 add $771.00 

1217 add $1355.00 

† 




10 



 



Series AI25 ACURO Absolute DC = DI RC = N 

DeviceNet Interface 


Code 1: Model Code 2: Bits Code 3 :Mounting Code 4: Shaft Size Code 5: Protocol Code 6: Electrical Code 7: Connector 

AI25 

AI25 

Size25 

Acuro 

Absolute 

Encoder 

Single-Turn 

0010 10 Bit 

0012 12 Bit 

0013 13 Bit 

0014 14 Bit 

Multi-Turn 

1212 12 Bit Multi- 

Turn, 12 Bit 

Single-Turn 


Turn, 13 Bit 

Single-Turn 


Turn, 14 Bit 

Single-Turn 


Code 4 is 0 or A 

0 Servo* 


Code 4 is 2 or C 

1 Clamping* 


Code 4 is 1 or B 

2 Square 

flange** 


Code 4 is 3, 4, 

5 or 6 

3 Hubshaft w/ 

tether† 

* 58mm Dia. 

** 2.5" Square 

† 63mm BC 

w/o shaft seal (IP64) 

0 6 mm 

1 3/8" 

2 10 mm 

3 3/8" Hub Shaft 

4 12 mm Hubshaft 

5 1/2" Hubshaft 

6 10mm Hubshaft 

w/ shaft seal (IP67) 

A 6 mm 

B 3/8" 

C 10 mm 


9 Devicenet 2 10-30 VDC 

F 

G 

L 

Bus Cover 

1 M12, 5-Pole 

Connector 

Bus Cover 

2 Strain Relief Exits 

and 1 M12, 5-Pole 

Connector (for Tico 

display). Internal 

T-coupler included 

Bus Cover 

2 Strain Relief Exits. 

Internal T-coupler 

included 

AI25 

Base Price 

$519.00 

0010 n/c 

0012 add $54.00 

0013 add $107.00 

0014 add $161.00 

1212 add $321.00 

1213 add $385.00 

1214 add $472.00 

0 n/c 

1 n/c 

2 n/c 

3 add $27.00 

0 n/c 

1 n/c 

2 n/c 

3 n/c 

4 n/c 

5 n/c 

6 n/c 

A add $16.00 

B add $16.00 

C add $16.00 

9 add $54.00 2 add $27.00 F add $27.00 

G add $27.00 

L add $27.00 

† 





11

and 



Profibus Interface 



AI25 

AI25 

Size25 

Acuro 

Absolute 

Encoder 

Single-Turn 

0010 10 Bit 

0012 12 Bit 

0013 13 Bit 

0014 14 Bit 

Multi-Turn 


Turn, 12 Bit 

Single-Turn 


Turn, 13 Bit 

Single-Turn 


Turn, 14 Bit 

Single-Turn 



0 Servo* 



1 Clamping* 



2 Square 

flange** 


Code 4 is 3, 4, 

5 or 6 

3 Hubshaft w/ 

tether† 

* 58mm Dia. 


† 63mm BC 


0 6 mm 

1 3/8" 

2 10 mm 






A 6 mm 

B 3/8" 

C 10 mm 


6 Profibus 2 10-30 VDC 

E 

G 

H 

Bus Cover 



included 

Bus Cover 






Bus Cover Double 

Conin. Internal 


AI25 

Base Price 

$519.00 

0010 n/c 

0012 add $54.00 

0013 add $107.00 

0014 add $161.00 

1212 add $321.00 

1213 add $385.00 

1214 add $472.00 

0 n/c 

1 n/c 

2 n/c 

3 add $27.00 

0 n/c 

1 n/c 

2 n/c 

3 n/c 

4 n/c 

5 n/c 

6 n/c 

A add $16.00 

B add $16.00 

C add $16.00 

6 add $54.00 2 add $27.00 E add $27.00 

G add $27.00 

H add $27.00 

† 




12 



 




Interbus Interface 



AI25 

AI25 

Size25 

Acuro 

Absolute 

Encoder 

Single-Turn 

0010 10 Bit 

0012 12 Bit 

Multi-Turn 


Turn, 12 Bit 

Single-Turn 



0 Servo* 



1 Clamping* 



2 Square 

flange** 


Code 4 is 3, 4, 

5 or 6 

3 Hubshaft w/ 

tether† 

* 58mm Dia. 


† 63mm BC 


0 6 mm 

1 3/8" 

2 10 mm 






A 6 mm 

B 3/8" 

C 10 mm 

5 Interbus K3 2 10-30 VDC 

E 

G 

H 

Bus Cover 



included 

Bus Cover 






Double Conin. 


included 


AI25 

Base Price 

$519.00 

0010 n/c 

0012 add $54.00 

1212 add $321.00 

0 n/c 

1 n/c 

2 n/c 

3 add $27.00 

0 n/c 

1 n/c 

2 n/c 

3 n/c 

4 n/c 

5 n/c 

6 n/c 

5 add $107.00 2 add $27.00 E add $27.00 

G add $27.00 

H add $27.00 

A add $16.00 

B add $16.00 

C add $16.00 

† 





13

and 



SSI Interface 



AI25 

AI25 

Size25 

Acuro 

Absolute 

Encoder 

Single-Turn 

0010 10 Bit 

0012 12 Bit 

0013 13 Bit 

0014 14 Bit 

0017 17 Bit 

Multi-Turn 


Turn, 12 Bit 

Single-Turn 


Turn, 13 Bit 

Single-Turn 



0 Servo* 



1 Clamping* 



2 Square 

flange** 


Code 4 is 3, 4, 

5 or 6 

3 Hubshaft w/ 

tether† 

* 58mm Dia. 


† 63mm BC 


0 6 mm 

1 3/8" 

2 10 mm 






A 6 mm 

B 3/8" 

C 10 mm 


2 SSI Gray 

3 SSI Binary 

0 5 VDC 

2 10-30 VDC 

0 1.5m axial cable 

1 1.5m radial cable 

2 M23 Conin 

12 pin axial CW 

3 M23 Conin 

12 pin radial CW 

C 

D 

M12 , 8-pole 

connector axial 

M12 , 8-pole 

connector radial 

AI25 

Base Price 

$519.00 

0010 n/c 

0012 add $54.00 

0013 add $107.00 

0014 add $161.00 

0017 add $365.00 

1212 add $321.00 

1213 add $385.00 

0 n/c 

1 n/c 

2 n/c 

3 add $27.00 

0 n/c 

1 n/c 

2 n/c 

3 n/c 

4 n/c 

5 n/c 

6 n/c 

A add $16.00 

B add $16.00 

C add $16.00 

2 n/c 

3 n/c 

0 n/c 

2 add $27.00 

0 n/c 

1 n/c 

2 n/c 

3 n/c 

C n/c 

D n/c 

† 




14 



 




BiSS Interface 



AI25 

AI25 

Size25 

Acuro 

Absolute 

Encoder 

Single-Turn 

0010 10 Bit 

0012 12 Bit 

0013 13 Bit 

0014 14 Bit 

0017 17 Bit 

Multi-Turn 


Turn, 12 Bit 

Single-Turn 


Turn, 13 Bit 

Single-Turn 


Turn, 14 Bit 

Single-Turn 


Turn, 17 Bit 

Single-Turn 



0 Servo* 



1 Clamping* 



2 Square 

flange** 


Code 4 is 3, 4, 

5 or 6 

3 Hubshaft w/ 

tether† 

* 58mm Dia. 


† 63mm BC 


0 6 mm 

1 3/8" 

2 10 mm 






A 6 mm 

B 3/8" 

C 10 mm 

A BiSS 0 5 VDC 

2 10-30 VDC 



2 M23 Conin 


3 M23 Conin 


C 

D 

M12 , 8-pole 

connector axial 

M12 , 8-pole 

connector radial 


AI25 

Base Price 

$519.00 

0010 n/c 

0012 add $54.00 

0013 add $107.00 

0014 add $161.00 

0017 add $365.00 

1212 add $321.00 

1213 add $385.00 

1214 add $472.00 

1217 add $728.00 

0 n/c 

1 n/c 

2 n/c 

3 add $27.00 

0 n/c 

1 n/c 

2 n/c 

3 n/c 

4 n/c 

5 n/c 

6 n/c 

A add $16.00 

B add $16.00 

C add $16.00 

A n/c 0 n/c 

2 add $27.00 

0 n/c 

1 n/c 

2 n/c 

3 n/c 

C n/c 

D n/c 

† 





15

and 



Parallel Interface 

AI25 

Base Price 

$519.00 

0010 n/c 

0012 add $54.00 

0013 add $107.00 

0014 add $161.00 

0360 n/c 

0720 n/c 

1212 add $321.00 

0 n/c 

1 n/c 

2 n/c 

3 add $27.00 


0 n/c 

1 n/c 

2 n/c 

3 n/c 

4 n/c 

5 n/c 

6 n/c 

A add $16.00 

B add $16.00 

C add $16.00 

0 Single Turn 

n/c 

0 Multi-Turn 

add 

$375.00 

1 Single Turn 

n/c 

1 Multi-Turn 

add 

$375.00 



AI25 

AI25 

Size25 

Acuro 

Absolute 

Encoder 

Single-Turn 

0010 10 Bit 

0012 12 Bit 

0013 13 Bit 

0014 14 Bit 

0360 360 PPR 

(Gray excess) 

0720 720 PPR 

(Gray excess) 

Available when Code 6 

is 2 

Multi-Turn 


Turn, 12 Bit 

Single-Turn 



0 Servo* 



1 Clamping* 



2 Square 

flange** 


Code 4 is 3, 4, 

5 or 6 

3 Hubshaft 

w/tether† 

* 58mm Dia. 


† 63mm BC 


0 6 mm 

1 3/8" 

2 10 mm 




6 10 mm Hub Shaft 


A 6 mm 

B 3/8" 

C 10 mm 

0 Parallel 

Binary 

1 Parallel 

Gray 

0 5 VDC 

2 10-30 VDC 

0 n/c 

2 add $27.00 



Available when Code 2 is 

00XX, 0360 or 0720 

6 M23 Conin 


7 M23 Conin 


8 17 pin Conin axial 

CCW 

9 17 pin Conin radial 


00XX. Status LED and 

Preset Switch features 

not available with "J" 

J 17 pin MS axial 


00XX or 0720 

K 19 pin Bayonet radial 


is 1212 

A Cable 1.5m radial w/ 

37 pin sub-D 

B Cable 1.5m axial 

w/37 pin sub-D 

0 n/c 

1 n/c 

6 n/c 

7 n/c 

8 add $27.00 

9 add $27.00 

A add $27.00 

B add $27.00 

J 

K 

n/c 

n/c 

† 




16 



 



Series AD25 Drive ACURO Absolute DC = DI RC = N 

BiSS/SSI Interface 



AD25 

AD25 

Size25 

Acuro 

Absolute 

Encoder 

Single-Turn 

0013 13 Bit 

0022 22 Bit 

Multi-Turn 


Turn, 13 Bit 

Single-Turn 


Turn, 22 Bit 

Single-Turn 

4 Spring 

Tether 

Y 10mm Shaft 

(10:1 Taper) 

Z 10mm Hub Shaft 

(10:1 Taper) 



Code 2 is 0022 or 

1222 

A BiSS 


Code 2 is 0013 or 

1213 

F SSI-Gray 

Code, 

+ 1Vpp 

0 5 VDC 

M Drive cable, 1 foot 

(30 cm) 

AD25 

Base Price 

$462.00 

0013 n/c 

0022 add $428.00 

1213 add $385.00 

1222 add $942.00 

4 n/c Y n/c 

Z n/c 

A 

F 

n/c 

n/c 

0 n/c M n/c 

† 





17

Dynapar brand 


Series E12 

DC = DI; RC = N 


Code 1: Model 

E12 

Code 2: Pulses/Rev 

Code 3: Mechanical 

Code 4: Output 

Code 5: Electrical 

Code 6: Termination 

E12 Size 12, Light 

Duty 

Enclosed 

0250 

0256 

0360 

0500 

0600 

1000 

1024 

0 Sealed 

Bearing 

1 Shielded 

Bearing 

0 Unidirectional 

2 Bidirectional, 

no Index 


with Index 

0 5 VDC 

1 12 VDC 

2 15 VDC 

0 18" Cable 

1 3' Cable 

2 6' Cable 

3 10' Cable 

4 15' Cable 


E12 Base Price 

$482.00 

0250 

thru n/c 

1000 

1024 add $17.00 

0 add $5.00 

1 n/c 

0 n/c 

2 add $17.00 

3 add $34.00 

0 n/c 

1 n/c 

2 n/c 

0 n/c 

1 add $6.00 

2 add $14.00 

3 add $22.00 

4 add $34.00 

Series E14 



Code 1: Model 

E14 


Code 3: Mounting 





E14 Size 14, Light 

Duty 

Enclosed 

0100 

0200 

0250 

0256 

0300 

0400 

0500 

0600 

0720 

0750 

0900 

1000 

1024 

1250 

1500 

2000 

2048 

2500 

2540 

0 Size E14 

1 Size E20 

Servo 

2 Size E20 

Flange 


Code 4 is 2 

3 Size EC80 

Flange 

0 1/4" Shaft, 

Sealed 

Bearing 

1 1/8" Shaft, 

Sealed 

Bearing 

2 1/4" Shaft, 

Shielded 

Bearing 

3 1/8" Shaft, 

Shielded 

Bearing 


0 Single Ended, 

Unidirectional 


Bidirectional, 

no Index 



with Index 

4 Differential, 




no Index 



with Index 

0 5 VDC 

1 12 VDC 

2 15 VDC 

0 18" Cable 

1 3' Cable 

2 6' Cable 

3 10' Cable 

4 15' Cable 

E14 Base Price 

$338.00 

0100 

thru n/c 

1000 

1024 

thru add $16.00 

2048 

Above 2048 

add $48.00 

0 n/c 

1 add $27.00 

2 add $54.00 

3 add $54.00 

0 add $5.00 

1 n/c 

2 add $10.00 

3 add $16.00 

0 n/c 

2 add $10.00 

3 add $22.00 

4 add $16.00 

6 add $27.00 

7 add $37.00 

0 n/c 

1 n/c 

2 n/c 

0 n/c 

1 add $6.00 

2 add $12.00 

3 add $22.00 

4 add $32.00 

† 




18 




Series E23 

Code 1: Model 

E23 

E23 Size 23 

Enclosed 

0001 

0005 

0010 

0012 

0050 

0060 

0100 

0120 

0150 

0180 

0200 

0240 

0250 

0256 


0300 

0344 

0360 

0400 

0500 

0512 

0600 

0625 

0635 

0720 

0800 

0900 

1000 

Veeder-Root Dynapar Eagle Signal 


1024 

1200 

1250 

1270 

1500 

1600 

1800 

1968 

2000 

2048 

2400 

2500 

2540 

For Resolutions above 

2540, see Series EC23 



0 1/4" Shaft, 

Shielded 

Bearings 

1 1/4" Shaft, 

Sealed 

Bearings 




4 Single Ended, with 

Index, Format C 

5 Differential, with 



Index, Format D 



8 Single Ended, no 


9 Differential, no Index, 

Format C 


0 5-26V in; 5-26V Open 

Collector w/2.2kΩ 

Pullup out 

1 5-26V in; 5-26V Open 

Collector out 

2 5-26V in; 5V TTL 

Totem Pole out 

3 5-26V in; 5V Line 

Driver out (7272) 

4 5-26V in; 5-26V Line 


5 5-26V in, 5V Differential 

Line Driver out (4469) 

6 5-15V in, 5-15V 

Differential Line Driver 

out (4469) 


0 18" Cable 

1 3' Cable 

2 6' Cable 

3 10' Cable 

4 15' Cable 

8 Screw 

Terminals 


E23 

Base Price 

$401.00 

0001 

thru n/c 

1000 

1024 


2540 

0 n/c 

1 add $10.00 

4 add $33.00 

5 add $33.00 

6 add $33.00 

7 add $33.00 

8 n/c 

9 n/c 

0 n/c 

1 add $10.00 

2 add $10.00 

3 add $10.00 

4 n/c 

5 add $28.00 

6 add $28.00 

0 n/c 

1 add $6.00 

2 add $12.00 

3 add $23.00 

4 add $33.00 

8 n/c 

† 





19



Series EC23 

Code 1: Model 

EC23 

EC23 Size 23 

Enclosed 


3000 

3600 

4096 

5000 

3,000 

3,600 

4,096 

5,000 

For Resolutions below 

3000, see Series E23 



0 1/4" Shaft, 

Shielded 

Bearings, 

2.31” Dia. 

Servo Mount 

w/ 4-Hole 

Face Mount 

1 1/4" Shaft, 

Sealed 

Bearings, 

2.31” Dia. 

Servo Mount 

w/ 4-Hole 

Face Mount 










7 Differential, with Index, 

Format D 

8 Single Ended, No 


9 Differential, No Index, 

Format C 


0 5-26V in, 5-26V Open 

Collector w/2.2kΩ 

Pullups out 

1 5-26V in, 5-26V Open 

Collector out 

2 5-26V in; 5V out, Push- 

Pull out 


Driver out 

4 5-26V in, 5-26V Line 

Driver out 


0 18” Cable, 

Side Exit 

1 3' Cable, Side 

Exit 


Exit 

3 10' Cable, 

Side Exit 

4 15' Cable, 

Side Exit 

8 Screw 

Terminals 


EC23 $595.00 

n/c 

0 n/c 

1 add $10.00 

4 add $32.00 

5 add $32.00 

6 add $32.00 

7 add $32.00 

8 n/c 

9 n/c 

0 n/c 

1 add $10.00 

2 add $10.00 

3 add $10.00 

4 n/c 

0 n/c 

1 add $6.00 

2 add $12.00 

3 add $22.00 

4 add $32.00 

8 n/c 

Series PC9 

Code 1: Model 

Code 2: PPR 

DC = DM; RC = N 


Code 3: Output Description 

Code 4: Mounting Description 


PC9S 

PC9 

0.9" Dia. short 

depth 

Panelcoder 

0.9" Dia. 

Panelcoder 

0100 

0144 

0200 

0256 

0300 

0360 

0500 

0512 

Available when Code 1 is PC9 

01 Differential ABZ 

02 Single ended ABZ, 

Up Down Direction 

Available when Code 1 is PC9S 

03 Single ended AB 

04 Single ended ABZ 

M 

N 

1/4" Shaft, sleeve bearing 

1/8" shaft, ball bearings 


PC9S 

PC9 

Base Price 

$103.00 

Base Price 

$120.00 

0100 

thru N/C 

0360 

0500 

thru add 

0512 $2.00 

All Standard Outputs 

N/C 

M N/C 

N add $7.00 

PC9 accessory connector w/12" ribbon cable, part no. CA0040012 Price $21.00 

PC9S accessory connector w/12" wires, part no. CA0050012 Price $16.00 

† 




20 






NexGen Qube 

Code 1: Model 


DC = DI RC = N 



Code 4: Output Code 5: Electrical Code 6: Termination 

22 Qube 

Encoder, 

Bidirectional 

22M Metric Qube 

Encoder, 

Bidirectional 

22 Base Price 

$251.00 

22M Base Price 

$264.00 

0001 

0010 

0012 

0024 

0025 

0035 

0040 

0050 

0060 

0100 

0120 

0125 

0150 

0192 

0200 

0240 

0250 

0256 

0300 

0001 

thru n/c 

1024 

0360 

0500 

0512 

0600 

0625 

0720 

0800 

1000 

1024 

1200 

1250 

1270 

1440 

2000 

2048 

2500 

2540 

2600 

3600 

1200 


3600 

available only when 

Code 1 is 22 

0 3/8" Double ended 

shaft 

1 3/8" Single ended 

shaft 

2 1/4" Double ended 

shaft 

3 1/4" Single ended 

shaft 

A Same as "0" with 

shaft seal 

B Same as "1" with 

shaft seal 

C Same as "2" with 

shaft seal 

D Same as "3" with 

shaft seal 


Code 1 is 22M 

4 6mm Double ended 

shaft 

5 6mm Single ended 

shaft 

E Same as "4" with 

F 

shaft seal 

Same as "5" with 

shaft seal 


0 Single Ended, Table 1 

2 Differential, Table 2 


Code 1 is 22 or 22M: 


Index, Table 3 


Code 6 is 1 to 5 or A to E: 


Index, Table 5 


code 6 is 0: 

4 Differential, Table 4 


Code 6 is 6: 

5 5 pin M12 connector, 

single ended, no 

index, Table 6 


single ended, with 



single ended, no 



single ended, with 



differential, no index, 

Table 8 

A 8 pin M12 connector, 

differential, with 



0 add $10.00 0 n/c 

1 add $5.00 1 add $64.00 

2 add $5.00 

3 n/c 

2 add $16.00 

4 add $5.00 3 add $91.00 

5 n/c 

4 add $16.00 

A Add $27.00 

5, 6 add $27.00 

B Add $22.00 

C Add $22.00 7, 8, 9 add $37.00 

D Add $16.00 A add $37.00 

E Add $22.00 

F Add $16.00 

available when Code4 = 

0, 1, 5, 6, 7 or 8: 

0 5-26 VDC in, 5-26 

VDC Open Collector 

w/2.2k pull-ups out 

1 5-26 VDC in, 5-26 

VDC Open Collector 

w/o pull-up out 

2 5-26 VDC in, 5V 


available when Code4 = 

2, 3, 4, 9 or A: 

3 5-26 VDC in, 5V 

Line Driver out 

4 5-26 VDC in, 5-26 

VDC CMOS Line 

Driver 

0 n/c 

1 n/c 

2 n/c 

3 n/c 

4 n/c 

0 MS Connector 

available when Code 3 

is 0, 1, 2, 3, 4 or 5 

1 18" Cable 

2 3' Cable 

3 6' Cable 

4 10' Cable 

5 15' Cable 


is 5, 6, 7, 8, 9 or A 

6 M12 Connector 


is A,B,C,D,E or F 

A 18" Sealed Cable 

B 3' Sealed Cable 

C 6' Sealed Cable 

D 10' Sealed Cable 

E 15' Sealed Cable 

0 n/c 

1 add $3.00 

2 add $6.00 

3 add $12.00 

4 add $22.00 

5 add $32.00 

6 n/c 

A Add $14.00 

B Add $18.00 

C Add $24.00 

D Add $32.00 

E Add $43.00 

111328-0001 Qube Pivot Mount bracket $123.00 

† 





21



Series H20 



Code 1: Model 

H2 

Code 2: PPR 

Code 3: Housing 

Code 4: Shaft 

Code 5: Face Mount 

Code 6:Pilot, Seal 



Code 9: Options 



2 Bidirectional 


with Index 

0001 

0005 

0010 

0012 

0050 

0060 

0100 

0120 

0200 

0240 

0250 

0256 

0300 

0360 

0400 

0500 

0512 

0600 

0800 

0900 

1000 

1024 

1200 

1250 

1270 

1500 

1600 

1800 

1968 

2000 

2048 

2400 

2500 

2540 

0 Servo 

Mount 

1 Flange 

Mount 

0 3/8" Dia. 

Shaft with 

flat 

1 1/4" Dia. 

Shaft, no 

flat 

4 10mm 

Dia. Shaft, 

no flat 

0 no face 

mount 

available when 

Code 3 is 0: 

1 (4) #10-32 

@ 1.63" BC 

2 (3) #4-40 

@ 1.50" BC 

3 (3) #6-32 

@ 1.75" BC 


Code 3 is 1: 

4 (4) #6-32 

@ 2.00" BC 

0 1.18" Dia. 

Female 

Pilot 

1 1.25" Dia. 

Male Pilot 

2 1.25" Dia. 

Male Pilot 

with Shaft 

Seal 

3 0.69" Dia. 

Male Pilot 

4 0.69" Dia. 

Male Pilot 

with Shaft 

Seal 

0 5-26V in, 5-26V Open 

Collector out 

1 5-26V in, 5-26V Open 

Collector out with 2.2 

kΩ Pullups 

2 5-26V in, 5-26V 

Push-Pull out 


extend. temp range 





available when: Code 1 is 1 

or 2 and Code 8 is 2 

through M; or Code 1 is 3 

and Code 8 is 4 thru M, Q 

or R: 

3 5-26V in, 5-26V 


out (7272) 

4 5-26V in, 5V Differential 


5 5-26V in, 5 V Differential 


6 5-15V in, 5-15V 


out (4469) 

D Same as "3" with extend. 

temp range 

E Same as "4" with extend. 

temp range 

0 6 Pin Conn, End Mount 

1 6 Pin Conn, Side Mount 



4 10 Pin Conn, End 

Mount 

5 10 Pin Conn, Side 

Mount 

6 18" Cable, End Exit 

7 18" Cable, Side Exit 

8 36" Cable, End Exit 

9 36" Cable, Side Exit 

A 10' Cable, End Exit 

B 10' Cable, Side Exit 

J 25' Cable, End Exit 

K 25' Cable, Side Exit 

N 

P 

Q 

R 

5 Pin M12 Connector, 

End Mount 


Side Mount 


End Mount 


Side Mount 

available when Code 6 is 2 

or 4: 

C 18" Sealed Cbl, End Exit 

D 18" Sealed Cbl, Side Exit 

E 36" Sealed Cbl, End Exit 

F 36" Sealed Cbl, Side Exit 

G 10' Sealed Cbl, End Exit 

H 10' Sealed Cbl, Side Exit 

L 25' Sealed Cbl, End Exit 


Code 8 is 0 to 5: 

PS LED 

Output 

Indicator 

M 

25' Sealed Cbl, Side Exit 


H21 Base 

Price 

$359.00 

H22 Base 

Price 

$359.00 

H23 Base 

Price 

$371.00 

0001 

thru 

0600 

n/c 

0601 add 

thru $37 

1024 

1200 add 

thru $75.00 

2540 

0 n/c 

1 n/c 

0 n/c 

1 n/c 

4 n/c 

0 n/c 

1 add $3.00 

2 add $3.00 

3 add $3.00 

4 add $3.00 

0 n/c 

1 n/c 

2 add $3.00 

3 n/c 

4 add $3.00 

0 n/c 

1 n/c 

2 add $10.00 

3 add $10.00 

4 add $10.00 

5 add $27.00 

6 add $27.00 

A add $32.00 

B add $32.00 

0, 1 n/c 

2, 3 n/c 

4, 5 add $5.00 

6, 7 n/c 

8, 9 add $3.00 

A, B add $16.00 

C, D add $3.00 

E, F add $6.00 

G, H add $20.00 

PS $27.00 

C add $43.00 

J, K, add $27.00 

D add $43.00 

L, M, N, P add $27.00 

E add $43.00 

Q, R add $37.00 

† 




22 




Series H58 

Code 1: Model 

H58 

H58 Bidirectional 

with 

Index 

(Channels 

A, B and 

Z) 

H58 Base 

Price 

$375.00 

Series H42 

Code 1: Model 

H42 

Code 2: PPR 

0001 

0010 

0012 

0050 

0060 

0086 

0100 

0120 

0125 

0200 

0240 

0250 

0300 

0360 

0400 

0500 

0512 

0001 

thru 

0600 

0600 

0800 

1000 

1024 

1200 

1250 

1270 

1500 

1600 

1800 

1968 

2000 

2048 

2400 

2500 

2540 

n/c 

0601 add 

thru $38.00 

1024 

1200 add 

thru $77.00 

2540 


H42 Size 25, 

Economical 

0001 

0012 

0060 

0100 


H42 Base Price 

$633.00 

0001 

thru n/c 

0600 

Code 3: Pilot, Face 



0 (3) M4 @ 

42mm 

BC, no 

Pilot 

1 (3) M3 @ 

48mm 

BC, 

36mm 

Dia. Pilot 

0 n/c 

1 n/c 

DC = DI RC = R † Lead Time (Days) = 3 Encoder Catalog 


0120 

0500 

0600 


Code 4: Shaft 

0 6mm 

Dia. 

Shaft 

1 10mm 

Dia. 

Shaft 

0 n/c 

1 n/c 

Code 5: Shaft Seal 




0 no Shaft 

Seal 0 5-26V in, 5-26V Push-Pull out 

1 Shaft Seal 


thru B, E or F: 

1 5-26V in, 5-26V Differential 


2 5-26V in, 5V Differential Line 


3 5-26V in, 5V Differential Line 


4 5-15V in, 5-15V Differential 


† 




A 

B 

C 

Same as "0" with extend. temp 

range 


range 


range 


0 n/c 0 n/c 

1 add 1 add $3.00 

$11.00 2 add $3.00 

3 add $11.00 

4 add $11.00 

A add $33.00 

B add $36.00 

C add $36.00 






4 12 Pin CCW Conn, End 

Mount 

5 12 Pin CCW Conn, Side 

Mount 

6 12 Pin CW Conn, End 

Mount 

7 12 Pin CW Conn, Side 

Mount 

C 5 pin M12 Conn, End 

Mount 

D 5 pin M12 Conn, Side 

Mount 

E 8 pin M12 Conn, End 

Mount 

F 8 pin M12 Conn, Side 

Mount 

available when Code 

5 is 1: 

8 1m Sealed Cbl, End Exit 

9 1m Sealed Cbl, Side Exit 

A 3m Sealed Cbl, End Exit 

B 3m Sealed Cbl, Side Exit 

0, 1 n/c 

2, 3 add $5.00 

4–7 add $5.00 

8, 9 add $6.00 

A, B add $20.00 

C, D add $27.00 

E, F add $38.00 

Code 8: Connector 

0 no Mating 

Connector 

1 7 Pin 

Mating 

Connector 

2 10 Pin 

Mating 

Connector 

3 12 Pin 

CCW 

Mating 

Connector 

4 12 Pin 

CW Mating 

Connector 

0 n/c 

1 add 

$20.00 

2 add 

$24.00 

3 add 

$24.00 

4 add 

$24.00 


23


Series HA25 

Code 1: Model 

HA 25 

HA525 

Size 25 

Enclosed, 

Shielded 

Bearings, 

Glass Disk 

HA625 

Size 25 

Enclosed, 

with Shaft 

Seal, Glass 

Disk 


Code 2: PPR Code 3: Mechanical 

0001 

0005 

0010 

0012 

0050 

0060 

0100 

0120 

0150 

0180 

0200 

0240 

0250 

0256 

0300 

0360 

0400 

0500 

0512 

0600 

0625 

0635 

0720 

0800 

0900 

1000 

1024 

1200 

1250 

1270 

1500 

1600 

1800 

1968 

2000 

2048 

2400 

2500 

2540 


0 Flange Mount, 

3/8" Shaft 

1 2.50" Servo 

Mount/ 4 Hole, 

2.00" BC Face 

Mount, 3/8" 

Shaft 


1/4" Shaft 

3 2.50" Servo 

Mount/ 

4 Hole 2.00" BC 

Face Mount, 

1/4" Shaft 

4 2.50" Servo 


2.00" BC Face 

Mount, 3/8" 

Shaft 

5 2.50" Servo 


2.00" BC Face 

Mount, 1/4" 

Shaft 

6 2.50" Servo 


1.88" BC Face 

Mount, 3/8" 

Shaft 

7 2.50" Servo 


1.88" BC Face 

Mount, 1/4" 

Shaft 

8 2.62" Servo 


1.88" BC Face 

Mount, 3/8" 

Shaft 

9 2.62" Servo 

Mount/ 

3 Hole, 1.88" 

BC Face Mount, 

1/4" Shaft 



Code 5: Electrical Code 6: Termination Code 7: Options 


7 Pin Connector or Cable 

0 Single Ended, no Index, Format A, Table 2 

1 Single Ended, with Index, Format A, Table 2 

4 Single Ended, with Index, Format B, Table 2 

6 Differential, no Index, Format C, Table 3 

A Single Ended, with Index, Format C, Table 2 

C Single Ended, no Index, Format C, Table 2 

G Single Ended, with Index, Format D, Table 2 


2 Differential, no Index, Format A, Table 1 

3 Differential, with Index, Format A, Table 1 

5 Differential, with Index, Format B, Table 1 

B Differential, with Index Format C, Table 1 

D Differential, no Index, Format C, Table 1 

available when Code 6 is 0 or 1 

5 Pin M12 Connector 

H Single ended, no index, Format A, Table 4 

J Single ended, with index, Format A, Table 4 

K Single ended, with index, Format B, Table 4 

L Single ended, with index, Format C, Table 4 

M Single ended, no index, Format C, Table 4 

N Single ended, with index, Format D, Table 4 



P Single ended, no index, Format A, Table 5 

Q Single ended, with index, Format A, Table 5 

R Single ended, with index, Format B, Table 5 

S Single ended, with index, Format C, Table 5 

T Single ended, no index, Format C, Table 5 

U Single ended, with index, Format D, Table 5 

V Differential, no index, Format A, Table 6 

W Differential, with index, Format A, Table 6 

X Differential, with index, Format B, Table 6 

Y Differential, with index, Format C, Table 6 

Z Differential, no index, Format C, Table 6 

0 5-26V in; 5-26V 

Open Collector 

with 2.2kΩ Pullup 

out 

1 5-26V in; 5-26V 


out 

2 5-26V in; 5V 




4 5-26V in; 5-26V 


(7272) 

5 5-26V in, 5V 

Differential Line 

Driver out 

(4469) 

6 5-15V in, 5-15V 


Driver out 

(4469) 


extend. temp 

range 


extend. temp 

range 


extend. temp 

range 


extend. temp 

range 


extend. temp 

range 

0 End Mount Connector 

1 Side Mount Connector 


thru G 

2 18" Cable, Side 





J 18" Cable, End 

K 3' Cable, End 

L 6' Cable, End 

M 10' Cable, End 

N 15' Cable, End 

available when Code 1 is 

HA625 and Code 4 is 0 

thru G 

A 18" Watertight, Side 

B 3' Watertight, Side 

C 6' Watertight, Side 

D 10' Watertight, Side 

F 15' Watertight, Side 

P 18" Watertight, End 

Q 3' Watertight, End 

R 6' Watertight, End 

S 10' Watertight, End 

T 15' Watertight, End 


Code 4 is 0 thru 

G, and Code 6 is 

0 or 1: 

PS LED 

Output 

Indicator 


HA525 Base Price 

$454.00 


$481.00 

0001 

thru 

1000 

1024 

thru 

2540 

n/c 

add 

$16.00 

0 n/c 

1 to 5 add $10.00 

6 n/c 

7 to 9 add $10.00 

0, 2, 6 n/c 

1, 3, 4, 5 add $35.00 

A, B, G add $35.00 

C, D n/c 

H to N add $27.00 

P to Z add $37.00 

0 n/c 

1 to 4 add $10.00 

5, 6 add $27.00 

A add $32.00 

B to E add $43.00 

0 n/c 

1 add $10.00 

2, A, J, P add $3.00 

3, B, K, Q add $6.00 

4, C, L, R add $12.00 

5, D, M, S add $22.00 

6, F, N, T add $32.00 

PS $27.00 

† 




24 






Series HC25 DC = DI RC = N 

Code 1: Model 

HC 25 

HC525 Size 25 

Enclosed, 

Shielded 

Bearings 

HC625 Size 25 

Enclosed, 

with 

Shaft 

Seal 

HC525 Base Price 

$635.00 

HC625 Base Price 

$661.00 

Code 2: PPR 

n/c 

3000 

3600 

4096 

5000 



3/8" Shaft 

1 2.50" Servo 


2.00" BC Face 

Mount, 3/8" 

Shaft 


1/4" Shaft 

3 2.50" Servo 

Mount/ 

4 Hole 2.00" BC 

Face Mount, 

1/4" Shaft 

4 2.50" Servo 


2.00" BC Face 

Mount, 3/8" 

Shaft 

5 2.50" Servo 


2.00" BC Face 

Mount, 1/4" 

Shaft 

6 2.50" Servo 


1.88" BC Face 

Mount, 3/8" 

Shaft 

7 2.50" Servo 


1.88" BC Face 

Mount, 1/4" 

Shaft 

8 2.62" Servo 


1.88" BC Face 

Mount, 3/8" 

Shaft 

9 2.62" Servo 

Mount/ 

3 Hole, 1.88" 


1/4" Shaft 

0 n/c 

1 to 5 add $10.00 

6 n/c 

7 to 9 add $10.00 



























0 5-26V in; 5-26V 



out 

1 5-26V in; 5-26V 

Open Collector out 

2 5-26V in; 5V 



Driver out 

4 5-26V in; 5-26V 


A 

B 

C 

D 

E 


extend. temp 

range 


extend. temp 

range 


extend. temp 

range 


extend. temp 

range 


extend. temp 

range 















0, 2, 6 n/c 0 n/c 

1, 3, 4, 5 add $35.00 1 to 4 add $10.00 

A, B, G add $35.00 A add $32.00 

C, D n/c B to E add $43.00 

H to N add $27.00 

P to Z add $37.00 




Available when Code 1is 

HC525 and Code 4 is 

0 thru G: 






J 

K 

L 

M 

N 

18" Cable, End 

3' Cable, End 

6' Cable, End 

10' Cable, End 

15' Cable, End 

Available when Code 1is 

HC625and Code 4 is 

0 thru G: 











0 n/c 

1 add $10.00 

2, A, J, P add $3.00 

3, B, K, Q add $6.00 

4, C, L, R add $12.00 

5, D, M, S add $22.00 

6, F, N, T add $32.00 


Blank None 




0 or 1: 

PS 

LED 

Output 

Indicator 

PS $27.00 

† 





25


Series HR25 

Code 1: Model 

HR 25 

HR525 

Size 25 

Enclosed, 

Shielded 

Bearings 

HR625 

Size 25 

Enclosed, 

with Shaft 

Seal 

HR525 Base Price 

$454.00 

HR625 Base Price 

$481.00 


Code 2: PPR Code 3: Mechanical 

0001 

0010 

0012 

0050 

0060 

0086 

0100 

0120 

0200 

0240 

0001 

thru 

1000 

1024 

0250 

0300 

0360 

0400 

0500 

0600 

0800 

1000 

1024 

n/c 

add 

$16.00 



3/8" Shaft 

1 2.50" Servo 


2.00" BC Face 

Mount, 3/8" 

Shaft 


1/4" Shaft 

3 2.50" Servo 

Mount/ 

4 Hole 2.00" BC 

Face Mount, 

1/4" Shaft 

4 2.50" Servo 


2.00" BC Face 

Mount, 3/8" 

Shaft 

5 2.50" Servo 


2.00" BC Face 

Mount, 1/4" 

Shaft 

6 2.50" Servo 


1.88" BC Face 

Mount, 3/8" 

Shaft 

7 2.50" Servo 


1.88" BC Face 

Mount, 1/4" 

Shaft 

8 2.62" Servo 


1.88" BC Face 

Mount, 3/8" 

Shaft 

9 2.62" Servo 

Mount/ 

3 Hole, 1.88" 


1/4" Shaft 

0 n/c 

1 to 5 add $10.00 

6 n/c 

7 to 9 add $10.00 



Code 5: Electrical Code 6: Termination Code 7: Options 






































0, 2, 6 n/c 

1, 3, 4, 5 add $35.00 

A, B, G add $35.00 

C, D n/c 

H to N add $27.00 

P to Z add $37.00 

0 5-26V in; 5-26V 



out 

1 5-26V in; 5-26V 


out 

2 5-26V in; 5V 



Driver out 

(7272) 

4 5-26V in; 5-26V 


(7272) 

5 5-26V in, 5V 

Differential 


(4469) 

6 5-15V in, 5- 

15V Differential 


(4469) 


extend. temp 

range 


extend. temp 

range 


extend. temp 

range 


extend. temp 

range 


extend. temp 

range 

0 n/c 

1 to 4 add $10.00 

5, 6 add $27.00 

A add $32.00 

B to E add $43.00 




0 thru G: 






J 18" Cable, End 

K 3' Cable, End 

L 6' Cable, End 

M 10' Cable, End 

N 15' Cable, End 


HR625 and Code 4 is 

0 thru G:: 











0 n/c 

1 add $10.00 

2, A, J, P add $3.00 

3, B, K, Q add $6.00 

4, C, L, R add $12.00 

5, D, M, S add $22.00 

6, F, N, T add $32.00 




0 or 1: 

PS LED 

Output 

Indicator 

PS $27.00 

† 




26 






Series HA725 



Code 1: Model 

HA725 

Code 2: PPR 





HA725 Size 25, 

High 

Resolution 

08192 

09000 

10000 


3/8" Shaft 


0 Single 

Ended 

2 Differential 

Available when Code 4 = 0: 

0 10-30 VDC in; Push- 

Pull out 

available when Code 4 = 2: 

4 5 VDC in; 5 VDC Line 

Driver out 

0 Connector, End 

Mount 

1 Connector, Side 

Mount 



$1544.00 

08192 

thru n/c 

10000 

0 n/c 

0 n/c 

2 n/c 

0 n/c 

4 n/c 

0 n/c 

1 n/c 

† 





27

NorthStar Dynapar brand 

Series H56 

Code 1: Model 

H56 

H56 Mill Duty, 

56C-Face or 

Foot Mount 

Rotopulser ® 

Code 2: PPR 

0001 

0003 

0010 

0012 

0015 

0032 

0050 

0060 

0100 

0120 

0200 

0240 

0250 

0300 

0360 

0500 

0512 

0600 

0900 

1000 

1024 

1200 

1500 

2000 

2048 

2400 

2500 

3072 

4000 

4096 

5000 



Code 3: Shaft 

1 Single 

2 Double 


Code 4: Format 


2 Single, bidirectional 

quadrature (AB) 

3 Single, bidirectional 

quadrature with index 

(ABZ) 

4 Dual, isolated 

bidirectional 

quadrature (dual AB) 

6 Dual, isolated 

bidirectional 

quadrature with index 

(dual ABZ) 


0 5-26V in, 5-26V 

open collector out 

1 5-26V in, 5-26V 


w/2.2kΩ pullups 

2 5-26V in, 5-26V 

single ended 

push-pull out 

Complimentary outputs 

provided 

3 5-26V in, 5V 

differential line 

driver out (7272) 

4 5-26V in, 5-26V 



5 5-26V in, 5V 



6 5-15V in, 5-15V 




0 MS Connector(s) 

1 MS Connector(s), plus 

mating connector(s) 

2 Pluggable screw 

terminal connector(s) 

3 Pluggable screw 

terminal(s), plus 

mating connector(s) 



Code 6 is 0 or 1: 

PS LED 

Output 

Indicator 


H56 

Base 

Price 

$1229.00 

0001 

thru 

1024 

n/c 

1200 

thru 

2500 

add $27.00 

1 n/c 

2 add $43.00 

2 n/c 

3 add $85.00 

4 add $150.00 

6 add $236.00 

0 n/c 

1 n/c 

2 n/c 

3 add $27.00 

4 add $27.00 

5 add $43.00 

6 add $43.00 

0 n/c 

1 add $16.00 

2 add $43.00 

3 add $85.00 

PS $27.00 

3072 

thru 

5000 

add $37.00 

† 




28 






Series 60 Rotopulser ® 



Code 1: Model 

6 


Code 3: Shaft 

Code 4: Output Code 5: Voltage 

F 



Code 7: Wiring 

A 

Code 8: Misc 


Heavy Duty 


with Marker, 

Heavy Duty 

A Standard 

Housing for 

Single Shaft 

C Standard 

Housing for 

Double Shaft 

H Hand-Held 

Housing with 

Double Shaft 

and two 12" 

Circumference 

Measuring 

Wheels 

A 1/2" Dia, 1.0" 

Len with Flat 

B 1/2" Dia, 1.0" 

Len without 

Flat 

C 1/2" Dia, 1.5" 

Len with Flat 

D 1/2" Dia, 1.5" 

Len without 

Flat 

Available when Code 

2 = A or C: 

G 1/4" Dia, 1.0" 

Len without 

Flat 

H 1/4" Dia, 1.0" 

Len with Flat 

E 

Single 

Ended 


Code 2 = A or C: 

D Differential 

F 5 to 15 

VDC 

0001 

0002 

0004 

0005 

0006 

0010 

0012 

0015 

0018 

0020 

0025 

0040 

0045 

0050 

0060 

0064 

0090 

0096 

0100 

0120 

0125 

0127 

0128 

0150 

0180 

0192 

0200 

0203 

0240 

0250 

0256 

0300 

0306 

0315 

0360 

0375 

0382 

0384 

0390 

0400 

0402 

0430 

0450 

0500 

0508 

0512 

0530 

0550 

0600 

0625 

0720 

0750 

0800 

0805 

0833 

0900 

1000 

1024 

1200 

1270 

1500 

1800 

2000 

2160 

2250 

2400 

2500 

A MS 

Connector 

0 No Shaft 

Seals 


Code 3 = A, B, 

C, or D: 

B Shaft 

Seals 


62 Base Price 

$1228.00 

63 Base Price 

$1348.00 

A n/c 

C add $45.00 

H add $323.00 

A n/c 

B add $33.00 

C add $22.00 

D add $56.00 

G add $101.00 

H add $66.00 

E n/c 

D n/c 

F n/c 0001 

thru n/c 

0900 

1000 


2500 

A n/c 

0 n/c 

B add 

$28.00 

† 





29



Series 60P Rotopulser ® 



Code 1: Model 

6 


P 

Code 3: Shaft 


Code 5: Voltage 

F 


Code 7: Wiring 

Code 8: Misc 



Heavy Duty 


with Marker, 

Heavy Duty 

P 

Mill Duty 

M 

N 

5/8" Dia, 

Single Shaft 

with Keyway 

5/8" Dia, 

Double Shaft 

with Keyway 

D Differential 

E Single Ended 

K Single Ended, 

Dual Isolated, 

6 and 7 pin 

connectors 

L Differential, 


10 and 7 Pin 

Connectors 


1 is 62: 

M Differential, 


10 and 10 Pin 

Connectors 

F 5 to 15 

VDC 

0001 

0002 

0004 

0005 

0006 

0010 

0012 

0015 

0018 

0020 

0025 

0040 

0045 

0050 

0060 

0064 

0090 

0096 

0100 

0120 

0125 

0127 

0128 

0150 

0180 

0192 

0200 

0203 

0240 

0250 

0256 

0300 

0306 

0315 

0360 

0375 

0382 

0384 

0390 

0400 

0402 

0430 

0450 

0500 

0508 

0512 

0530 

0550 

0600 

0625 

0720 

0750 

0800 

0805 

0833 

0900 

1000 

1024 

1200 

1250 

1270 

1500 

1800 

2000 

2160 

2250 

2400 

2500 

A MS 

Connector 


Code 4 is D or 

E: 

T Terminal 

Strip 

0 No Purge 

Plugs, No 

Shaft Seals 

A Purge 

Plugs, No 

Shaft Seals 

B No Purge 

Plugs, 

Shaft Seals 

C Purge 

Plugs and 

Shaft Seals 


62 Base Price 

$1815.00 

63 Base Price 

$1937.00 

P n/c 

M 

N 

n/c 

add 

$45.00 

D n/c 

E add $56.00 

K add $156.00 

L add $156.00 

M add $128.00 

F n/c 0001 

thru n/c 

0900 

1000 


2500 

A add 

$17.00 

T n/c 

0 n/c 

A add 

$56.00 

B add 

$28.00 

C add 

$83.00 

† 




30 






Series E9 



Code 1: Model 

E9 

Code 2: PPR 

Code 3: Hub Bore Description 

Code 4: Output Description 



E9 

0.9" Diameter 

Incremental 

Modular 

Encoder 

0100 

0144 

0200 

0256 

0300 

0360 

0500 

0512 

1.5 1.5 mm 

2.0 2.0 mm 

2.5 2.5 mm 

3.0 3.0 mm 

4.0 4.0 mm 

125 0.125 in 

156 0.156 in 

00 Differential AB, no index 

01 Differential ABZ 

02 Single ended ABZ, 

Up Down Direction 

0 No mounting base 

A 4x M1.6 on 0.728" BC 

C 2x #2-56 on 0.75" BC 

D 3x #0-80 on 0.823" BC 

E 2x #2-56 0n 1.812" BC 


E9 

Base Price 

$93.00 

0100 

thru N/C 

0360 

0500 

thru add 

0512 $2.00 

All Standard Hub Bores 

N/C 

All Standard Outputs 

N/C 

Accessory connector 

w/12" ribbon cable, 

part no. CA0040012 

$21.00 

All Standard Mountings 

N/C 

IMPORTANT: To properly install Series E9, a specialized mounting kit must be purchased. Only one kit is required to install any number of 

encoders with the same hub bore size. 

Code 3 (from Models Table, above) designating 

Hub Bore requirement. 

Kit Part Number: MK E9 Price, all types: $25.00 

Example: Kit for installing encoders with 3.0 mm hub Bore= MK E9 3.0 

† 





31



Series E14 HS 



Code 1: Model 

E14 







E14 Size 14, Hub 

Shaft 

0100 

0200 

0250 

0256 

0300 

0400 

0500 

0600 

0720 

0750 

0900 

1000 

1024 

1250 

1500 

2000 

2048 

2500 

2540 

0 Size E14 

Hub I.D. 

D 6 mm 

E 1/4" 

F 5/16" 

G 3/8" 

H 10 mm 

J 12 mm 

K 1/2" 

L 14 mm 

M 5/8" 

N 8 mm 





no Index 



with Index 





no Index 



with Index 

0 5 VDC 

1 12 VDC 

2 15 VDC 

0 18" Cable 

1 3' Cable 

2 6' Cable 

3 10' Cable 

4 15' Cable 


E14 Hub Shaft 

Base Price 

$367.00 

0100 

thru n/c 

1000 

1024 


2048 

Above 2048 

add $48.00 

0 n/c 

D n/c 

E n/c 

F n/c 

G n/c 

H n/c 

J add $22.00 

K add $22.00 

L add $22.00 

M add $22.00 

N n/c 

0 n/c 

2 add $10.00 

3 add $22.00 

4 add $16.00 

6 add $27.00 

7 add $37.00 

0 n/c 

1 n/c 

2 n/c 

0 n/c 

1 add $6.00 

2 add $12.00 

3 add $22.00 

4 add $32.00 

† 




32 






Series E14 IC 



Code 1: Model 

E14 



0 





E14 Size 14, with 

Integral Shaft 

Coupling 

0100 

0200 

0250 

0256 

0300 

0400 

0500 

0600 

0720 

0750 

0900 

1000 

1024 

1250 

1500 

2000 

2048 

2500 

2540 

0 Size E14 

A NEMA Size 23 

Flange Mount 

with 1/4" 

Motor Shaft 

Coupling 

B NEMA Size 23 

Flange Mount 

with 3/8" 

Motor Shaft 

Coupling 

C NEMA Size 34 

Flange Mount 

with 3/8" 

Motor Shaft 

Coupling 





no Index 



with Index 





no Index 



with Index 



with Index, 

Reversed 

Phasing 

0 5 VDC 

1 12 VDC 

2 15 VDC 

0 18" Cable 

1 3' Cable 

2 6' Cable 

3 10' Cable 

4 15' Cable 


Code 5 = 7 or 8: 

5 10' Cable, 

DB25 

Connector 

7 25' Cable, 

DB25 

Connector 


E14 with Integral 

Coupling 

Base Price 

$391.00 

0100 

thru n/c 

1000 

1024 


2048 

Above 2048 

add $48.00 

0 n/c 

A n/c 

B n/c 

C n/c 

0 n/c 

2 add $10.00 

3 add $22.00 

4 add $16.00 

6 add $27.00 

7 add $37.00 

8 add $48.00 

0 n/c 

1 n/c 

2 n/c 

0 n/c 

1 add $6.00 

2 add $12.00 

3 add $22.00 

4 add $32.00 

5 add $22.00 

7 add $22.00 

605106-1 Replacement for E14 Integral Coupling when Code: 4 = A (1/4" shaft) $66.00 

605106-3 Replacement for E14 Integral Coupling when Code: 4 = B or C (3/8" shaft) $85.00 

† 





33



Series M9 

M9 

Code 1: Model 

M9 

0.9" Diameter 

Incremental 

Modular 

Encoder 

Code 2: PPR 

0100/0 

0200/0 

0256/0 

0300/0 

0360/0 

0500/0 

0512/0 



0 

Code 3: Mounting Description Code 4: Hub Bore Description Code 5: Termination Description 


0 No mounting base 1.5 1.5 mm 1 5 pin header 

A 4x M1.6 on 0.728" BC, 2.0 2.0 mm 2 flying leads 

C 2x #2-56 on 0.75" BC 2.5 2.5 mm 

D 3x #0-80 on 0.823" BC 3.0 3.0 mm 

E 2x #2-56 0n 1.812" BC 4.0 4.0 mm 

125 0.125 in 

156 0.156 in 


M9 

Base Price 

$73.00 

0100/0 

thru N/C 

0360/0 

0500/0 

thru add 

0512/0 $2.00 


N/C 


N/C 

1 N/C 

2 add $2.00 

Accessory connector 

w/12" wires, 

part no. CA0050012 

$16.00 

IMPORTANT: To properly install Series M9, a specialized mounting kit must be purchased. Only one kit is required to install any number of 




Kit Part Number: MK M9 Price, all types: $25.00 

Example: Kit for installing encoders with 3.0 mm hub Bore= MK M9 3.0 

† 




34 






Series M14 



Code 1: Model 

M14 

Code 2: PPR 

0 


Code 4: Hub Bore Description 


M14 

1.5" Diameter 

Incremental 

Modular 

Encoder 

0200/0 

0400/0 

0500/0 

0512/0 

1000/0 

1024/0 

0 No mounting base 

A 2x #2-56 on1.28" BC 

B 3x #0-80 on 0.823" BC 

C 2x #2-56 on 0.75" BC 

3.0 3.0 mm 

4.0 4.0 mm 

5.0 5.0 mm 

6.0 6.0 mm 

8.0 8.0 mm 

125 0.1248 in 

187 0.1873 in 

249 0.2498 in 

250 0.2501 in 

312 0.3123 in 

374 0.3748 in 

375 0.3750 in 


M14 Base Price 

$90.00 

0200/0 

thru 

0512/0 

N/C 


N/C 


N/C 

1000/0 

thru add 

1024/0 $2.00 

Accessory connector w/12" wires, part no. CA0060012 Price $19.00 

IMPORTANT: To properly install Series M14, a specialized mounting kit must be purchased. Only one kit is required to install any number of 




Kit Part Number: MK M14 Price, all types: $25.00 

Example: Kit for installing encoders with 0.1248" hub Bore= MK M14 125 

† 





35



Series M15 



Code 1: Model 

M15 

Code 2: PPR, Poles 

/ 

Code 3: Cover 


Code 5: Hub 



M15 Size 15 

Commutating 

Modular 

Incremental channels only 

0200/0 1000/0 

0400/0 1024/0 

0500/0 

Incremental plus 

Commutation channels 

0500/6 

1000/4 

1000/6 

1024/4 

1024/6 

1024/8 

0 No cover 

1 Enclosed, 

end-of-shaft 

mount 

2 Through 

shaft 

0 5V in, open collector out 

incremental only 



3 5V in, line driver out 


Available when Code 2 is XXXX/4, 

XXXX/6, or XXXX/8 

6 5V in, line driver out incr.; 5V 

in, open collector out comm. 

0 1/4 in. 

1 3/8 in. 

4 6 mm 

5 8 mm 

6 10 mm 

8 3/16 in. 

9 1/8 in. 

0 Pin Header 

1-8 Mating ribbon 

cable included; 

1=1 ft., 2=2 ft., 

etc. 

A-H Shielded cable; 

A=1 ft., B=2 ft., 

etc. 

1000/8 




in, line driver out comm. 


M15 

Base Price 

$176.00 


XXXX/0 n/c 



XXXX/N add $16.00 

0 n/c 

1 add $5.00 

2 add $10.00 

0 n/c 

1 n/c 

3 add $5.00 

6 add $5.00 

7 add $5.00 

9 add $10.00 

0-9 n/c 0 n/c 

1-8 add $1.00/ft. 

A-H add $2.00/ft. 

† 




36 




Series M53 

M53 Size 20 

Commutating 

Modular 

M53 





0500/0 1024/0 

0512/0 2000/0 

1000/0 2048/0 



0500/4 1024/4 

0500/6 1024/6 

0500/8 1024/8 

0512/8 

1000/4 

1000/6 

1000/8 

2000/4 

2000/6 

2000/8 

2048/4 

2048/6 

2048/8 

2048/8 

0 No cover 

1 Radial exit 

cover(for 

shielded 

cable) 

2 Axial exit(for 

shielded cable 

with JST 

connector) 


Code 1: Model Code 2: PPR, Poles Code 3:Cover Code 4: Electrical Code 5:Hub Code 6:Termination 

M53 

Base Price 

$176.00 

XXXX/0 N/C 

XXXX/4 Add $16 



0 N/C 

1 Add $5 

2 Add $5 








A 12V in, 5V line driver out 


B 12V in,12V line driver out 




6 5V in,line driver out incremental 

open collector out Comm 

9 5V in,line driver out incremental 

line driver out Comm 

C 12V in,5Vline driver out 

incremental,open collector 

D 12V in,12Vline driver out 

incremental,open collector 

E 12V in,5V line driver out 

incremental,5Vline driver out 

Comm out Comm out Comm 

F 12V in,12Vline driver out 

incremental,12Vline driver out 

Comm 


0 N/C 

1 N/C 

3 Add $5 

A Add $5 

B Add $5 

6 Add $5 

9 Add $10 

C Add $5 

D Add $5 

E Add $10 

F Add $10 

Exposed hub clamp 

screw: 

A 1/4 in. 

B 3/8 in. 

C 7/16 in. 

D 1/2 in. 

E 6 mm 

F 8 mm 

G 10 mm 

H 12 mm 

A-H N/C 

0 JST connector 


3 is 2: 

1-8 Shielded cable 

with connector; 

1=1 ft., 2=2 ft., 

etc. 


3 is 1: 

A-H Shielded cable; 

A=1 ft., B=2 ft., 

etc. 

0 N/C 

1-8 Add $2/Ft 

A-H Add $2/Ft 

† 





37



Series F10 



F10 

F10 

Code 1: Model 

F10 

Size 1O 

Commutating 

Encoder 

Base Price 

$176.00 


/ 


1024/0 

2048/0 



1024/6 

2048/6 

Incremental channels 

only 

1024/0 n/c 

2048/0 add $16.00 


commutation 

channels 

1024/6 add $10.00 

2048/6 add $27.00 

Code 3: Mount 

0 

0 Servo 

mount 

1.030" 

Diameter x 

.095" thick 



Available when Code 2 is XXXX/0 




6 5V in, line driver out for 

incremental; 5V in, open 

collector out for commutation 


incremental; 5V in, line 

driver out for commutation 


0 n/c 3 n/c 

4 n/c 

6 add $5.00 

9 add $10.00 

Code 5: Shaft/Bore 

4 

4 6mm thru bore 


0 

0 6.5" ±0.5” 

Twisted Pair 

Flying Leads 

0 n/c 

† 




38 






Series F14 



Code 1: Model 

F14 


/ 

Code 3: Tether 




F14 Size 14 

Commutating 

Encoder 


0200/0 

0400/0 

0500/0 

1000/0 

1024/0 

0500/† 

1000/† 

1024/† 

2000/† 

2000/0 

2048/0 

2500/0 

4096/0 

5000/0 



2048/† 

2500/† 

4096/† 

5000/† 

† Available with 4, 6 or 8 

poles. 

e.g. 1000/6 is 1000PPR 

with 6 poles 

0 No Tether 

1 2 #2 on 

1.181" 

Diameter 

3 2 #4 on 

1.811" 

Diameter 

6 2 M2.5 on 

30mm 

Diameter 

8 2 M3 on 

46mm 

Diameter 


Available when Code 2 is ≤ 1024/0 



C 5V in, open collector out 

incremental only - reverse 

phase 




D 5V in, line driver out 


phase 





E 5V in, line driver out incr.; 5V 

in, open collector out comm. - 

reverse phase 



F 5V in, line driver out incr.; 5V 

in, line driver out comm. - 

reverse phase 

Inside Collar: 

0 1/4 in. 

4 6 mm 

5 8 mm 

Outside Collar: 

A 1/4 in. 

E 6 mm 

F 8 mm 

Code 

Connector/Cable Wire Length 

Axial Radial Pigtail 

0 Z N/A None 

1 A J 1 Ft. 

2 B K 2 Ft. 

3 C L 3 Ft. 

4 D M 4 Ft. 

5 E N 5 Ft. 

6 F P 6 Ft. 

7 G Q 7 Ft. 

8 H R 8 Ft. 

CONNECTION OPTIONS 

You may choose an integral 

connector mounted in axial 

or radial position. Available 

with or without mating 

connector/cable. 

Alternativly, a direct-solder 

pigtail cable is offered. 

F14 

Base Price 

$202.00 


only 

0200/0 thru 1024/0 

n/c 

2000/0 thru 2500/0 

add $27.00 

4096/0 thru 5000/0 

add $54.00 


commutation 

channels 

0500/† thru 1024/† 

add $6.00 

2000/† thru 2500/† 

add $33.00 

4096/† thru 5000/† 

add $60.00 

0 n/c 

1 n/c 

3 n/c 

6 n/c 

8 n/c 


0 n/c 

C n/c 

3 add $5.00 

D add $5.00 

6 add $5.00 

E add $5.00 

9 add $10.00 

F add $10.00 

0-5 n/c 

A-F n/c 

Axial or Radial 

Connector: 

0, Z n/c 

1, A add $6.00 

2, B add $9.00 

3, C add $12.00 

4, D add $16.00 

5, E add $20.00 

6, F add $23.00 

7, G add $26.00 

8, H add $29.00 

Direct-solder pigtail: 

J - R add $3.00/ft. 

† 





39



Series F15 



Code 1: Model 

F15 

F15 Size 15 

Commutating 

Encoder 

F15 

Base Price 

$176.00 


/ 


1024/0 

2048/0 



1024/6 

2048/6 

1024/8 

2048/8 

Consult factory 

for other 

configurations 


only 

1024/0 n/c 

2048/0 add $16.00 


commutation 

channels 

1024/6 add $10.00 

2048/6 add $27.00 

1024/8 add $10.00 

2048/8 add $27.00 

Code 3: Mount 

0 

0 Servo mount 

1.435" 

Diameter x 

.095" thick 






Available when Code 2 is XXXX/6 or 8 





incremental; 5V in, line driver 

out for commutation 


0 n/c 3 n/c 

1 n/c 

6 add $5.00 

9 add $10.00 


1 

1 3/8 in. thru bore 


0 

0 6.5" ±0.5” 

Twisted Pair 

Flying Leads 

0 n/c 

† 




40 




Series F18 

Code 1: Model 

F18 

F18 Size 18 

Commutating 

Encoder 


/ 


0500/0 

0512/0 

1000/0 

1024/0 

2000/0 

0500/† 

0512/8 

1000/† 

1024/† 

2000/† 

2048/† 



2048/0 

2500/0 

4096/0 

5000/0 



2500/† 

4096/† 

5000/† 

† Available with 4, 6, 8 

or 12 pole. (12 pole is 

designated by character "C") 

Examples: 1024/8 is 

1024PPR, 8 pole; 

2000/C is 2000PPR, 

12 pole 



0 No Tether 

2 2 #4 on 

1.575" 

Diameter 

3 2 #4 on 

1.811" 

Diameter 

4 2 #4 on 

2.376" 

Diameter 

5 3 #4 on 

2.60" 

Diameter 

7 2 M2.5 on 

40 mm 

Diameter 

8 2 M3 on 

46 mm 

Diameter 

9 2 M3 on 

60 mm 

Diameter 

A 3 M3 on 

66 mm 

Diameter 




Available when Code 2 is ≤ 1024/0 



C 5V in, open collector out 


phase 




D 5V in, line driver out 


phase 


XXXX/6, XXXX/8 or XXXX/C 



E 5V in, line driver out incr.; 5V 

in, open collector out comm. - 

reverse phase 



F 5V in, line driver out incr.; 5V 

in, line driver out comm. - 

reverse phase 


Inside Collar: 

0 1/4 in. 

1 3/8 in. 

2 7/16 in. 

3 1/2 in. 

4 6 mm 

5 8 mm 

6 10 mm 

7 12 mm 

Outside Collar: 

A 

B 

C 

D 

E 

F 

G 

H 

1/4 in. 

3/8 in. 

7/16 in. 

1/2 in. 

6 mm 

8 mm 

10 mm 

12 mm 


Code 

Connector/Cable Wire Length 

Axial Radial Pigtail 

0 Z N/A None 

1 A J 1 Ft. 

2 B K 2 Ft. 

3 C L 3 Ft. 

4 D M 4 Ft. 

5 E N 5 Ft. 

6 F P 6 Ft. 

7 G Q 7 Ft. 

8 H R 8 Ft. 

CONNECTION OPTIONS 

You may choose an integral 

connector mounted in axial 

or radial position. Available 

with or without mating 

connector/cable. 

Alternativly, a direct-solder 

pigtail cable is offered. 

F18 

Base Price 

$202.00 


only 

0500/0 thru 2048/0 

n/c 

2500/0 thru 5000/0 

add $27.00 


commutation 

channels 

0500/† thru 2048/† 

add $6.00 

2500/† thru 5000/† 

add $33.00 

2 n/c 

3 n/c 

4 n/c 

5 n/c 

7 n/c 

8 n/c 

9 n/c 

A n/c 


0 n/c 

C n/c 

3 add $5.00 

D add $5.00 

6 add $5.00 

E add $5.00 

9 add $10.00 

F add $10.00 

0-7 n/c 

A-H n/c 

Axial or Radial 

Connector: 

0, Z n/c 

1, A add $6.00 

2, B add $9.00 

3, C add $12.00 

4, D add $16.00 

5, E add $20.00 

6, F add $23.00 

7, G add $26.00 

8, H add $29.00 

Direct-solder pigtail: 

J - R add $3.00/ft. 

† 





41


Series F21 

Code 1: Model 

F21 

F21 Size 21 

Commutating 

Encoder 

F21 

Base Price 

$176.00 



/ 


1024/0 

2048/0 



1024/8 

2048/8 

1024/C 

2048/C 

Note: “C”= 10 poles. 

Consult factory for 

other configurations 


only 

1024/0 n/c 

2048/0 add $16.00 


commutation 

channels 

1024/8 add $10.00 

2048/8 add $27.00 

1024/C add $10.00 

2048/C add $27.00 


Code 3: Mount 

0 

0 Servo mount 

2.047" 

Diameter 

x.090" thick 







Available when Code 2 is XXXX/8 or C 





incremental; 5V in, line driver 

out for commutation 


0 n/c 3 n/c 

3 n/c 

6 add $5.00 

9 add $10.00 


3 

3 1/2 in. thru bore 


0 

0 6.5” ±0.5” 

Twisted Pair 

Flying Leads 

0 n/c 

† 




42 




Series HC20 





Code 1: 

Model 

Code 2: 

Resolution 

Code 3: 

Commutation 

Code 4: 

Mounting 

Code 5: 

Output 

Code 6: Shaft Size 

Code 7: Cable Length 


HC20 

/ 

HC20 

0500 

0512 only 


Code 3 is /8) 

0512 

1000 

1024 

2000 

2048 

2500 

0 None 

4 4 pole 

6 6 pole 

8 8 pole 

0 No Tether 

1 1.515" (40mm) 

BC tether 

2 2.166" (55mm) 

BC tether 

0 5VDC in, Open Collector Out 

(Available when Code 2 is 2048 or lower 

and Code 3 is /0) 

2 5-26VDC in, RS422 out 

( Available when Code 3= 0) 

3 5VDC in, RS422 Out 

(Available when Code 3 is /0) 

6 5VDC in, RS422 Out (Incr.) 5VDC in, Open 

Collector Out (Comms) 

(Available when Code 3 is /4, /6, or /8) 

9 5VDC in, RS422 Out (Incr) 5VDC in, 

RS422 Out (Comms) 

(Available when Code 3 is /4, /6, or /8) 

0 9mm Tapered Hub 

1 6mm Hub 

2 8mm Hub 

3 6mm Hollow 

4 8mm Hollow 

Axial Connector 

1 1 Ft 

2 2 Ft 

3 3 Ft 

4 4 Ft 

5 5 Ft 

6 6 Ft 

7 7 Ft 

8 8 Ft 

Radial Connector 

A 1 Ft 

B 2 Ft 

C 3 Ft 

D 4 Ft 

E 5 Ft 

F 6 Ft 

G 7 Ft 

H 8 Ft 


HC20 

Base Price 

$107.00 

0500 N/C 

0512 N/C 

1000 N/C 

1024 N/C 

2000 Add $10 

2048 Add $10 

2500 Add $10 

0 N/C 

4 Add $10 

6 Add $10 

8 Add $10 

0 N/C 

1 N/C 

2 N/C 

0 N/C 

2 Add $10 

3 N/C 

6 Add $10 

9 Add $10 

0 N/C 

1 N/C 

2 N/C 

3 N/C 

4 N/C 

Axial Connector 

1 Add $3 

2 Add $6 

3 Add $9 

4 Add $12 

5 Add $16 

6 Add $20 

7 Add $23 

8 Add $26 

Radial Connector 

A Add $3 

B Add $6 

C Add $9 

D Add $12 

E Add $16 

F Add $20 

G Add $23 

H Add $26 

† 





43



Series H20 Hub Shaft DC = DI; RC = N 

Code 1: Model 

H2 


(Channel 

A only) 


(Channels 

A and B) 


with 

Index 

(Channels 

A, B and 

Z) 

H21 Base 

Price 

$424.00 

H22 Base 

Price 

$424.00 

H23 Base 

Price 

$438.00 

Code 2: PPR 

0001 

0005 

0010 

0012 

0050 

0060 

0100 

0120 

0200 

0240 

0250 

0256 

0300 

0360 

0400 

0500 

0512 

0600 

0001 

thru 

0600 

0800 

0900 

1000 

1024 

1200 

1250 

1270 

1500 

1600 

1800 

1968 

2000 

2048 

2400 

2500 

2540 

n/c 

0601 add 

thru $37.00 

1024 

1200 add 

thru $75.00 

2540 


0 

0 Servo 

Mount 

C Same as 

"0" above 

includes 

protective 

cover kit 

for 

mounting 

on 4 1/2" 

C-face 

F Same as 

"0" above 

includes 

protective 

cover kit 

for 

mounting 

on fan 

cover 

0 n/c 

C add 

$32.00 

F add 

$32.00 

Code 4: Shaft 

2 5/8" Dia. 

Hub 

Shaft and 

flex 

coupling 

3 3/8" Dia. 

Hub 

Shaft and 

flex 

coupling 

5 1/2" Dia. 

Hub 

Shaft and 

flex 

coupling 

6 1/4" Dia. 

Hub 

Shaft and 

flex 

coupling 

2 n/c 

3 n/c 

5 n/c 

6 n/c 


Code5:FaceMount Code 6: Shaft Seal 

2 


2 (3) #4-40 

@ 1.50" 

BC 

0 no Shaft 

Seal 

5 Shaft Seal 


2 add $3.00 0 n/c 

5 add $3.00 


0 5-26V in, 5-26V Open 

Collector out 

1 5-26V in, 5-26V Open 

Collector out with 2.2 

kΩ Pullups 

2 5-26V in, 5-26V Push- 

Pull out 







available when: Code 1 is 1 

or 2 and Code 8 is 2 

through M; or Code 1 is 3 

and Code 8 is 4 thru M, Q 

or R: 

3 5-26V in, 5-26V 


out (7272) 

4 5-26V in, 5V 


out (7272) 

5 5-26V in, 5 V 


out (4469) 

6 5-15V in, 5-15 V 


out (4469) 





0 n/c 

1 n/c 

2 add $10.00 

3 add $10.00 

4 add $10.00 

5 add $27.00 

6 add $27.00 

A add $32.00 

B add $32.00 

C add $43.00 

D add $43.00 

E add $43.00 



Mount 


Mount 


Mount 


Mount 


Mount 


Mount 


Exit 


Exit 

B 10' Cable, Side 

Exit 

K 25' Cable, Side 

Exit 

N 5 Pin M12 

Connector, End 

Mount 

P 5 Pin M12 

Connector, Side 

Mount 

Q 8 Pin M12 

Connector, End 

Mount 

R 8 Pin M12 

Connector, Side 

Mount 


Code 6 is 5: 

D 18" Sealed Cbl, 

Side Exit 

F 36" Sealed Cbl, 

Side Exit 

H 10' Sealed Cbl, 

Side Exit 

M 25' Sealed Cbl., 

Side Exit 

0, 1 n/c 

2, 3 n/c 

4, 5 add $5.00 

6, 7 n/c 

8, 9 add $3.00 

A, B add $16.00 

C, D add $3.00 

E, F add $6.00 

G, H add $20.00 

K, M add $27.00 

N, P add $27.00 

Q, R add $37.00 



Code 8 is 0 to 

5: 

109296-0001 Replacement flexible mount for Series H20 Hub Shaft $90.00 

† 




PS 

PS 

LED Output 

Indicator 

Option 

add 

$27.00 

44 




Series HS20 

Code 1: Model 

HS20 

HS20 Size 20 

heavy-duty, 

sealed 

hollowshaft 

encoder 

Code 2: PPR 

Metal Disk: 

0001 

0050 

0060 

0100 

0180 

0200 

0250 

0256 

0300 

0360 

0400 

0720 

0800 

1000 

1024 

Glass Disk: 

1200 

1250 

1270 

1500 

1600 

1800 

1968 

2000 

2048 

2400 

2500 

2540 




Code 3: Bore Size 

0 6 mm 

1 1/4" 

2 5/16" 

3 8 mm 

4 3/8" 

5 10 mm 

6 12 mm 

7 1/2" 

8 5/8" 

9 15 mm 

A 16 mm 

B 14 mm 


Code 4: Fixing 

0 None - customer 

supplied 

1 Clearance hole for 

3/8" bolt on 5.88" 

dia. bolt circle 

(to fit 4-1/2" NEMA 

C-face) 

3 Slotted hole for 

bolt on 1.87" to 2.95" 

radius 

4 Same as '1', w/ 

protective cover kit 

5 Same as '3', w/ 

Protective cover kit 



0 single ended, 

undirectional (A) 


bidirectional (AB) 


bidirectional with 

index (ABZ) 


is 3, 4, A or B: 

3 differential, 

bidirectional ( AA 

BB) 


is 3, 4, A or B and 

code 7 is 2, or 

7 thru G: 



index ( AA BB ZZ) 



0 5-26V in, 5-26V 


1 5-26V in, 5-26V 


w/ 2.2kΩ pullups 

2 5-26V in, 5-26V 

push-pull out 


3 or 4: 

3 5-26V in, 5V line 

driver out 

4 5-26V in, 5-26V 

line driver out 

A same as '3' with 

extended temp. 

B 

–40˚ to 85˚C 

same as '4' with 

extended temp. 

–40˚ to 85˚C 


0 6 pin connector 



5 6 pin connector, 

plus mating 

connector 


plus mating 

connector 


plus mating 

connector 

A 18" cable 

B 36" cable 

C 72" cable 

D 10' cable 

F 13" cable with 10 

pin connector plus 


G 13" cable 

J 8 Pin M12 

Connector 


is 0 thru 2 

H 5 Pin M12 

Connector 



Code 7 is 0 or 5 

and Code 5 is 0-2, 

or Code 7 is 1, 2, 

6, 7: 

PS LED Output 

Indicator 

HS20 Base 

Price 

$374.00 

0001 

thru 

0400 

n/c 

0720 

thru 

2540 

add $27.00 

0 n/c 

1 n/c 

2 n/c 

3 n/c 

4 n/c 

5 n/c 

6 n/c 

7 n/c 

8 n/c 

9 n/c 

A n/c 

B n/c 

0 n/c 

1 add $16.00 

3 add $16.00 

4 add $32.00 

5 add $32.00 

0 n/c 

1 n/c 

2 n/c 

3 n/c 

4 n/c 

0 n/c 

1 n/c 

2 add $10.00 

3 add $10.00 

4 add $10.00 

A add $43.00 

B add $43.00 

0 n/c 

1 n/c 

2 n/c 

5 add $10.00 

6 add $10.00 

7 add $16.00 

A add $3.00 

B add $6.00 

C add $12.00 

D add $22.00 

F add $27.00 

G n/c 

H add $27.00 

J add $37.00 

PS $27.00 

112096-0001 Tether Kit (clearance hole for 3/8" bolt on 5.88" diameter bolt-circle) ............................................. $45.00 

112096-0002 Tether Kit (slotted hole for bolt on 1.87" to 2.75" radius) ................................................................. $45.00 

112105-0001 Protective Cover Accessory ............................................................................................................. $34.00 

† 





45


Series HS35 

Code 1: Model 

HS35 

HS35 Size 35 

heavy-duty, 

sealed 

hollowshaft 

encoder 


Code 2: PPR Code 3: Bore Size 

0001 

0003 

0010 

0012 

0050 

0060 

0064 

0100 

0120 

0240 

0250 

0300 

0360 

0500 

0512 

0600 

0900 

1000 

1024 

1200 

1270 

1500 

1800 

2000 

2048 

2400 

2500 


0 6 mm 

1 1/4" 

2 5/16" 

3 8 mm 

4 3/8" 

5 10 mm 

6 12 mm 

7 1/2" 

8 5/8" 

9 15 mm 

A 16 mm 

B 19 mm 

C 3/4" 

D 20 mm 

E 7/8" 

F 24 mm 

G 1" 

H 1-1/8" 

P 1-1/4" 


Code 4: Fixing Code 5: Format Code 6: Output Code 7: Termination Code 8: Options 

0 None - customer 

supplied 

1 Clearance hole 

for 3/8" bolt on 

5.88" dia. bolt 

circle 

(to fit 4-1/2" 

NEMA C-face) 

2 Clearance hole 

for 1/2" bolt on 

7.25" dia. bolt 

circle 

(to fit 8-1/2" 

NEMA C-face) 

3 Slotted hole for 

bolt on 2.5" to 

4.0" radius (to fit 

standard AC 

motor fan cover 

slots) 


5 is 0-4: 

4 Same as '1', 

w/ cover kit 

5 Same as '3', 

w/ cover kit 


5 is 5: 

6 Same as '1' 

w/ dual cover kit 

7 Same as '3' 

w/ dual cover kit 








index (ABZ) 


is 3, 4, 5, 6, A or B: 



BB) 


is 3, 4, 5, 6, A or B 

and Code 7 is 2, 3, 

or 7 thru G, J: 





is 3, 4, 5, 6, A or B, 

and Code 7 is 2, 7, 

A thru G, J: 

5 Dual isolated 

differential, bidirectional 

w/index 

(AABBZZ) 

0 5-26V in, 5-26V 


1 5-26V in, 5-26V 


w/ 2.2kΩ pullups 

2 5-26V in, 5-26V 

push-pull out 


is 3, 4 or 5: 

3 5-26V in, 5V line 


4 5-26V in, 5-26V line 


5 5-26V in, 5 V 



6 5-15V in, 5-15 V 



A same as '3' with 

extended temp. to 

100˚C 

B same as '4' with 


100˚C 






plus mating 

connector 


plus mating 

connector 

7 10 pin 

connector, plus 

mating 

connector 

8 12 pin 

connector, plus 

mating 

connector 

A 18" (.5m) cable 

B 36" (1m) cable 

C 72" (2m) cable 

D 10' (3m) cable 

F 13" (.3m) cable 

with 10 pin 

connector plus 

mating 

connector 

G 13" (.3m) cable 

J 8 Pin M12 

Connector 


Code 5 is 0 thru 2 

H 5 Pin M12 

Connector 

D2 Hazardous 

Location Certified 


7 is 2 

D3 Same as D2 

including adaptor 

for CSA Div. 2, 

Group F & G 

Certification. 

(see specifications) 

Note: Requires use 

of Mating Cable 

Assembly 114074- 

XXXX 


7 is 0 or 5 and Code 

5 is 0-2, or Code 7 is 

1, 2, 6, 7: 

PS LED Output 

Indicator 

Not provided with 

“Hazardous 

Location Certified” 

Option 

Leave Blank : 

No Option 

HS35 Base 

Price 

$518.00 

0001 

thru 

1024 

n/c 

1200 

thru 

2500 

add $27.00 

0 

thru 

9 

n/c 

A add 

thru $27.00 

P 

0 n/c 

1 n/c 

2 n/c 

3 n/c 

4 add $33.00 

5 add $33.00 

6 add $44.00 

7 add $44.00 


0 n/c 

1 n/c 

2 n/c 

3 n/c 

4 n/c 

5 add $159.00 

Accessories: 

109473-0001 Tether kit (clearance hole for 3/8" bolt on 5.88" dia. bolt circle) $34.00 

109473-0002 Tether kit (clearance hole for 1/2" bolt on 7.25" dia. bolt circle) $34.00 

109473-0003 Tether kit (slotted hole for bolt on 2.5" to 4.0" radius) $43.00 

110533-0001 Cover Kit, 56C face $77.00 

110533-0002 Cover Kit, fan cover $77.00 

0 n/c 

1 n/c 

2 add $11.00 

3 add $11.00 

4 add $11.00 

5 add $27.00 

6 add $27.00 

A add $44.00 

B add $44.00 

0 n/c 

1 n/c 

2 n/c 

3 n/c 

5 add $11.00 

6 add $11.00 

7 add $17.00 

8 add $17.00 

A add $3.00 

B add $6.00 

C add $13.00 

D add $22.00 

F add $27.00 

G n/c 

H add $27.00 

J add $38.00 

D2 add $328.00 

D3 add $491.00 

PS add $27.00 

Blank 

n/c 

110533-0003 Dual Cover Kit, 56C face $77.00 

110533-0004 Dual Cover Kit, fan cover $77.00 

112121-0001 Spare Hub Clamp (Bore size Code 3: 0 - 9) $40.00 

112121-0002 Spare Hub Clamp (Bore size Code 3: A - H) $40.00 

114064-0001 Adapter Kit, CSA Div. 2, Group F & G Cert. $203.00 

114074-0010 D3 Mating Cable, 10 ft. (Consult for other Length) $166.00 

† 




46 






Series HS35R DC = DI; RC = N 

Code 1: Model 

HS35R 

HS35R Industrialduty, 

hollowshaft 

encoder 

Code 2: PPR 

0001 

0003 

0010 

0012 

0015 

0032 

0050 

0060 

0100 

0120 

0200 

0240 

0250 

0300 

0360 

0500 

0512 

0600 

0900 

1000 

1024 

1200 

1500 

2000 

2048 

2400 

2500 

3072 

4000 

4096 

5000 


0 6mm 

1 1/4" 

2 5/16" 

3 8mm 

4 3/8" 

5 10mm 

6 12mm 

7 1/2" 

8 5/8" 

9 15mm 

A 16mm 

C 19mm 

D 3/4" 

E 20mm 

F 7/8" 

G 24mm 

H 1" 

J 1-1/8" 

K 1-1/4" 

M 14mm 

N 18mm 

P 25mm 

R 28mm 


Code 4: Fixing Code 5: Output Format 

0 None 

1 4-1/2" BC tether 

2 8-1/2" BC tether 

3 Slotted tether (to fit 

standard AC motor 

fan cover) 

Not available when 

Code 5 is D,E,F,G, Q, R 

4 Same as 1 w/cover 



is D,E,F,G, Q, R 

6 Same as 1 w/dual 

cover 

7 Same as 3 w/dual 

cover 

8 Same as 2 w/ 

180 C-face cover 

(single or dual 

output) 


0 ABZ, 5-26VDC push-pull 

1 ABZ, 5-26VDC O/C 

2 ABZ, 5-26VDC O/C w2.2kOhm 

H Same as "0" with Extended temp range 

J Same as "1" with Extended temp range 

K Same as "2" with Extended temp range 

Not available when Code 6 is H 

4 Differential AB only, 5-26VDC, 5-26VDC out (7272) 

5 Differential AB only, 5-26VDC in, 5VDC out (7272) 

A Differential AB only, 5-26VDC in, 5VDC out (4469) 

C Differential AB only, 5-15VDC in, 5-15VDC out (4469) 

L Same as "4" with Extended temp range 

M Same as "5" with Extended temp range 

Not available when Code 6 is 0, 1, 5, 6, or H 

6 Differential ABZ, 5-26VDC in, 5VDC out (7272) 

7 Differential ABZ, 5-26VDC in, 5-26VDC out (7272) 

8 Differential ABZ, 5-26VDC in, 5VDC out (4469) 

9 Differential ABZ, 5-15VDC in, 5-15VDC out (4469) 

D Dual isolated outputs, same as "6" 

E Dual isolated outputs, same as "7" 

F Dual isolated outputs, same as "8" 

G Dual isolated outputs, same as "9" 

N Same as "6" with Extended temp range 

P Same as "7" with Extended temp range 

Q Same as "D" with Extended temp range 

R Same as "E" with Extended temp range 


0 6 pin 

1 7 pin 

2 10 pin 

3 12 pin 

4 10 pin bayonet 

5 6 pin+mating 




9 10pin 

bayonet+mating 

A 0.5m (18") cable 

C 1m (36") cable 

D 2m (72") cable 

E 3m (120”) cable 

F 0.3m (13") cable with 

10- pin bulkhead 

connector and mate 

G 0.3m (13") cable 

H 5 pin M12 

J 8 pin M12 


01 Reverse 

Phasing (A leads 

B, CCW) 

Not available when 

Code 6 is 3, 4, 8, 9, 

A through J or 

when Code 5 is 4, 

5, 6, 7, 8, 9, A, C, 

D, E, F, G, L, M, N, 

P, Q, R and Code 6 

is 0 or 5 

PS LED Output 

Blank None 


0, H add $10.00 

1, 2, J, K n/c 

4-7, L, M, N, P add $10.00 

8, 9, A, C add $27.00 

D, E, Q, R add $166.00 

F, G add $182.00 

HS35R Base 

Price 

$450.00 

0001 

thru 

1024 

n/c 

1200 

thru 

2500 

add $27.00 

3072 

thru 

5000 

add $37.00 

0 

thru 

9 

n/c 

A add 

thru $27.00 

R 

0 n/c 

1 n/c 

2 n/c 

3 n/c 

4 add $32.00 

5 add $32.00 

6 add $43.00 

7 add $43.00 

8 add $85.00 

0-3 n/c 

4-6 add $10.00 

7-9 add $16.00 

3 n/c 

A add $3.00 

C add $6.00 

D add $12.00 

E add $22.00 

F add $27.00 

G n/c 

H add $27.00 

J add $37.00 

01 n/c 

PS $27.00 

Blank n/c 

Accessories: 

114573-0001 Tether kit, 4.5" C-face $50.00 

114574-0001 Tether kit, Slotted $50.00 


114591-0001 Cover Kit, 56-C face $74.00 

114592-0001 Cover Kit, Fan shroud $74.00 

114593-0001 Dual Cover Kit, 56C-face $74.00 


114594-0001 Dual Cover Kit, fan shroud $74.00 

† 





47



Series HA26 



Code 1: Model 

HA526 

Code 2: PPR 







HA526 

Size 25 with 

Integral 

Coupling 

and Flange 

Adapter, 

Glass Code 

Disk 

0001 

0005 

0010 

0012 

0050 

0060 

0100 

0120 

0150 

0180 

0200 

0240 

0250 

0256 

0300 

0360 

0400 

0500 

0512 

0600 

0625 

0635 

0720 

0800 

0900 

1000 

1024 

1200 

1250 

1270 

1500 

1600 

1800 

1968 

2000 

2048 

2400 

2500 

2540 

For 

Resolutions 

above 2540, 

see Series 

HC526 

A Flange Adapter 

with Pilot 

B Flange Adapter 

without Pilot 

C Flange Adapter 

for NEMA Size 

42 Motors 



































0 5-26V in; 5-26V 


with 2.2kΩ 

Pullup out 

1 5-26V in; 

5-26V Open 

Collector out 

2 5-26V in; 5V 

Totem Pole 

out 

3 5-26V in; 5V 

Differential 


(7272) 

4 5-26V in; 

5-26V 

Differential 


(7272) 

5 5-26V in, 5 V 

Differential 


(4469) 

6 5-15V in, 5-15 

V Differential 


(4469) 

A Same as "0" 

with extend. 

temp range 

B Same as "1" 

with extend. 

temp range 

C Same as "2" 

with extend. 

temp range 

D Same as "3" 

with extend. 

temp range 

E Same as "4" 

with extend. 

temp range 

0 End Mount 

Connector 

1 Side Mount 

Connector 


Code 4 is 0 thru G 









0 or 1: 

PS LED Output 

Indicator 


HA526 

Base Price 

$540.00 

0001 

thru 

1000 

1024 

thru 

2540 

n/c 

add 

$16.00 

A 

B 

C 

n/c 

n/c 

n/c 

0, 2 n/c 

1, 3, 4, 5 add $35.00 

A, B, G add $35.00 

C, D n/c 

H to N add $27.00 

P to Z add $37.00 

0 n/c 

1 to 4 add $10.00 

5, 6 add $27.00 

A add $32.00 

B to E add $43.00 

0 n/c 

1 add $10.00 

2 add $3.00 

3 add $6.00 

4 add $12.00 

5 add $22.00 

6 add $32.00 

PS $27.00 

605512-0020 Flexible Coupling 3/8"; 1/4", 3/8", 1/2" $74.00 

† 




48 






Series HR26 

Code 1: Model 

HR526 

HR526 

Size 25 with 

Integral 

Coupling 

and Flange 

Adapter 

Code 2: PPR 

0001 

0010 

0012 

0050 

0060 

0086 

0100 

0120 

0200 

0240 

0250 

0300 

0360 

0400 

0500 

0600 

0800 

1000 

1024 




with Pilot 


without Pilot 


for NEMA Size 

42 Motors 







































0 5-26V in; 5-26V 


with 2.2kΩ 

Pullup out 

1 5-26V in; 

5-26V Open 

Collector out 

2 5-26V in; 5V 

Totem Pole 

out 

3 5-26V in; 5V 

Differential 


(7272) 

4 5-26V in; 

5-26V 

Differential 


(7272) 

5 5-26V in, 5 V 

Differential 


(4469) 

6 5-15V in, 5-15 

V Differential 


(4469) 

A Same as "0" 

with extend. 

temp range 

B Same as "1" 

with extend. 

temp range 

C Same as "2" 

with extend. 

temp range 

D Same as "3" 

with extend. 

temp range 

E Same as "4" 

with extend. 

temp range 


0 End Mount 

Connector 

1 Side Mount 

Connector 












0 or 1: 

PS LED Output 

Indicator 

HR526 

Base Price 

$540.00 

0001 

thru 

1000 

1024 

n/c 

add 

$16.00 

A 

B 

C 

n/c 

n/c 

n/c 


0, 2 n/c 

1, 3, 4, 5 add $35.00 

A, B, G add $35.00 

C, D n/c 

H to N add $27.00 

P to Z add $37.00 

0 n/c 

1 to 4 add $10.00 

5, 6 add $27.00 

A add $32.00 

B to E add $43.00 

0 n/c 

1 add $10.00 

2 add $3.00 

3 add $6.00 

4 add $12.00 

5 add $22.00 

6 add $32.00 

PS $27.00 


† 





49



Series HC26 



Code 1: Model 

HC526 

Code 2: PPR 







HC526 

Size 25 Enclosed 

with Integral 

Coupling 

and Flange 

Adapter 

3000 

3600 

4096 

5000 


with Pilot 


without Pilot 


for NEMA Size 

42 Motors 



































0 5-26V in; 5-26V 


with 2.2kΩ 

Pullup out 

1 5-26V in; 

5-26V Open 

Collector out 

2 5-26V in; 5V 

Totem Pole 

out 

3 5-26V in; 5V 

Differential 


(7272) 

4 5-26V in; 

5-26V 

Differential 


(7272) 

A Same as "0" 

with extend. 

temp range 

B Same as "1" 

with extend. 

temp range 

C Same as "2" 

with extend. 

temp range 

D Same as "3" 

with extend. 

temp range 

E Same as "4" 

with extend. 

temp range 

0 End Mount 

Connector 

1 Side Mount 

Connector 











0 or 1: 

PS LED Output 

Indicator 


HC526 

Base Price 

$706.00 

n/c 

A 

B 

C 

n/c 

n/c 

n/c 

0, 2 n/c 

1, 3, 4, 5 add $35.00 

A, B, G add $35.00 

C, D n/c 

H to N add $27.00 

P to Z add $37.00 

0 n/c 

1 to 4 add $10.00 

A add $32.00 

B to E add $43.00 

0 n/c 

1 add $10.00 

2 add $3.00 

3 add $6.00 

4 add $12.00 

5 add $22.00 

6 add $32.00 

PS $27.00 


† 




50 




Series R45 Rotopulser ® 

Code 1: Model 

R45 

R45 Motor Mount 

Ring, for NEMA 

4-1/2" C-Face 

Motors 

R00 No Ring (gear 

or readhead 

only) 

R45 Base Price 

$103.00 

R00 Base Price 

Consult Factory 

Code 2: PPR 

0060 




Code 3: Gear, Bore 

0 no gear, 

readhead only 

1 5/8" bore (56C) 

2 7/8" bore 

(143TC, 145TC, 

182C, 184C) 



0 no readhead, gear 

only 

1 single channel (A), 

unidirectional 

2 dual channel (AB), 

bidirectional 

3 dual channel (AB), 


unidirectional (X2) 

speed output 


0060 n/c 0 n/c 

0 n/c 

1 add $43.00 1 add $134.00 

2 add $43.00 2 add $144.00 

3 add $156.00 



0 no readhead, 

gear only 


4 is 1, 2 or 3: 

1 5-15V in, 5-15V 

single ended 

out 

2 5-26V in, 5-26V 


driver out 

3 5-26V in, 5-26V 


0 n/c 

1 n/c 

2 add $27.00 

3 add $10.00 


0 no readhead, 

gear only 


4 is 1, 2 or 3: 

1 wire leads 

2 screw terminals 

A Same as 1, with 

protective cover 

B Same as 2, with 

protective cover 

0 n/c 

1 n/c 

2 add $16.00 

A add $27.00 

B add $43.00 

Series X25 


† Lead Time (Days) = 3 (10 if Code 2 is 3000/up) Encoder Catalog 

Code 1: Model 

X25 






X25 Explosion 

Proof, 

Shielded 

Bearings with 

Shaft Seal 

0001 

0010 

0012 

0050 

0060 

0086 

0100 

0120 

0125 

0200 

0240 

0250 

0300 

0360 

0400 

0500 

0600 

0720 

0768 

0800 

1000 

1024 

1200 

1250 

1270 

1500 

1600 

1800 

1968 

2000 

2048 

2400 

2500 

2540 

3000 

3400 

3600 

3750 

4000 

4096 

5000 

0 3/8" Shaft 

1 1/4" Shaft 

0 Single Ended, no index, 

Format C 

1 Single Ended, with index, 

Format C 

2 Differential, no Index, 

Format C 

3 Differential, with index, 

Format C 

4 Single Ended, with index, 

Format A 

5 Differential, with index, 

Format A 

0 5-26V in; 5-26V Open 

Collector with 2.2kΩ 

Pullup out 

1 5-26V in; 5-26V Open 

Collector out 

2 5-26V in; 5V Push-Pull 

out 


Driver out 

4 5-26V in; 5-26V Line 

Driver out 

X25 

Base 

Price 

$1323.00 

0001 

thru n/c 

1000 

1024 


2540 


0 n/c 

1 n/c 

0 n/c 

1 add $27.00 

2 n/c 

3 add $27.00 

4 add $27.00 

5 add $27.00 

0 n/c 

1 add $10.00 

2 add $10.00 

3 add $10.00 

4 add $10.00 

3000 


5000 

† 





51


Model 

† Lead Time D R List 

Number Description (Days) C C Price 

AC36-_ _ _ _-_ _ ACURO absolute encoder; see Table of Contents, page 1 — — — — 

AC110-_ _ _ _-_ _ ACURO absolute encoder; see Table of Contents, page 1 — — — — 

AD25-_ _ _ _-_ _ ACURO Drive absolute encoder; see Table of Contents, page 1 — — — — 

AD34-_ _ _ _-_ _ ACURO AD34 absolute encoder; see Table of Contents, page 1 — — — — 



AI25-_ _ _ _-_ _ ACURO Industrial absolute encoder; see Table of Contents, page 1 — — — — 

AI25W-1212-001 ACURO Pitch Control Encoder 20 DI R 1663.00 

AR62 _ _ _ _ _ _ _ Series AR62 Encoder; see Table of Contents, page 1 — — — — 

AR63 _ _ _ _ _ _ _ Series AR63 Encoder; see Table of Contents, page 1 — — — — 

AX70 _ _ _ _ _ _ _ Series AX70 Encoder; see Table of Contents, page 1 — — — — 

AX71_ _ _ _ _ _ _ Series AX71 Encoder; see Table of Contents, page 1 — — — — 

CA0040012 E9/PC9 accessory connector w/12"ribbon cable 15 DI R 21.00 

CA0050012 PC9S accessory connector w/12"wires 15 DI R 16.00 

CA0060012 M14 accessory connector w/12"wires 15 DI R 20.00 

CPL00750125 Flexible Shaft Coupling, 0.750" dia., 1/8" Pri. Bore, w/Sec. Bore Adaptors: 1/8", 3/16" 3 DI R 71.00 













CPL02001000 Flexible Shaft Coupling, 2.0" dia., 1" Pri. Bore, w/Sec. Bore Adaptors: 3/8", 5/8" 3 DI R 169.00 

CPL02001125 Flexible Shaft Coupling, 2.0" dia., 1 1/8" Pri. Bore, w/Sec. Bore Adaptors: 3/8", 5/8" 3 DI R 169.00 

CPLM1000250 Flexible Shaft Coupling, 1.0" dia., 1/4" Pri. Bore, w/Sec. Bore Adaptors: 4mm, 5mm, 6mm 3 DI R 90.00 



CPLX1250375 Flexible Shaft Coupling, 1.25" dia., 3/8" Pri. Bore, w/Sec. Bore Adaptors: 3/8", 1/2" 3 DI N 90.00 

E9-_ _ _ _-_ _ 0.9" optical encoder; see Encoder see Table of Contents, page 1 — — — — 

E12-_ _ _ _-_ _ Size 12, Light Duty Enclosed; see Table of Contents, page 1 — — — — 

E14-_ _ _ _-_ _ Size 14, Light Duty Enclosed; see Table of Contents, page 1 — — — — 

E23-_ _ _ _-_ _ Series E23 encoder; see Table of Contents, page 1 — — — — 

EC23-_ _ _ _-_ _ Series EC23 encoder; see Table of Contents, page 1 — — — — 

F10_ _ _ _ _ _ _ Size 10 commutating encoder; see Table of Contents, page 1 — — — — 

F14_ _ _ _ _ _ _ Series F14 1.4" commutating encoder; see Table of Contents, page 1 — — — — 


F18_ _ _ _ _ _ _ Series F18 1.8" commutating encoder; see Table of Contents, page 1 — — — — 


FPA1 NEMA C Face Adapter, 5/8" motor shaft 3 DI R 291.00 

FPA2 NEMA C Face Adapter, 7/8" motor shaft 3 DI R 346.00 

FPA3 NEMA C Face Adapter, 1" motor shaft 3 DI R 346.00 

H20 _ _ _ _ _ _ _ Series H20 Encoder; see Table of Contents, page 1 — — — — 

H42-_ _ _ Encoder, 3/8" shaft, flange mount, bidirectional; see Table of Contents, page 1 — — — — 



HA525 _ _ _ _ _ _ _ Series HA525 Encoder; see Table of Contents, page 1 — — — — 



HA725 _ _ _ _ _ _ Series HA725 Encoder; see Table of Contents, page 1 — — — — 

HC20 _ _ _ _ _ _ _ Series HC20 Encoder; see Table of Contents, page 1 — — — — 


† 




52 



Model 





HR525 _ _ _ _ _ _ _ Series HR525 Encoder; see Table of Contents, page 1 — — — — 



HS20 _ _ _ _ _ _ _ Series HS20 Encoder; see Table of Contents, page 1 — — — — 

HS35 _ _ _ _ _ _ _ Series HS35 Encoder; see Table of Contents, page 1 — — — — 

HS35R _ _ _ _ _ _ _ Series HS35R Encoder; see Table of Contents, page 1 — — — — 

M9-_ _ _ _-_ _ 0.9" optical encoder; see Table of Contents, page 1 — — — — 

M14-_ _ _ _-_ _ 1.5" optical encoder; see Table of Contents, page 1 — — — — 

M15-_ _ _ _-_ _ Series M15 encoder; see Table of Contents, page 1 — — — — 

M53-_ _ _ _-_ _ Series M53 encoder; see Table of Contents, page 1 — — — — 

MC1-C1 H58 CW 12 p M23 connector assembly 3 DI R 45.00 

MC1-C2 H58 CCW 12 p M23 connector assembly 3 DI R 45.00 

MCN-B1 … 3 DI R 45.00 

MCN-B1N4 bayonet style mating connector 3 DI R 109.00 

M20-N1 (2) 0.035" hex wrenches for Series M20 encoders 3 DI N 11.00 

MCN-N1 Mating connector with cable clamps; use with Series 52BH; 2 pins 3 DI R 44.00 

MCN-N2 Mating connector with cable clamps; use with Series 53Z, 3 pins 3 DI R 44.00 

MCN-N4 Mating connector with cable clamps; 6 pins 3 DI R 44.00 



MCN-N6N4 … 3 DI R 56.00 

MK E9_ _ _ Mounting kit for use with Series E9 Encoder 15 DI R 25.00 

MK M9_ _ _ Mounting kit for use with Series M9 Encoder 15 DI R 25.00 

MK M14 Mounting kit for use with Series M14 Encoder 15 DI R 25.00 

MPAEX5PY 5PY adapter kit for X25 encoder 3 DI N 200.00 

PC9-_ _ _ _-_ _ 0.9" Panelcoder; see Table of Contents, page 1 — — — — 

R45-_ _ _ _-_ _ Series R45 encoder; see Table of Contents, page 1 — — — — 

RI80-_ _ _ _-_ _ Optical encoder; see Encoder see Table of Contents, page 1 — — — — 

X25_ _ _ _ _ _ X25 Explosion Proof Encoder; see Table of Contents, page 1 — — — — 

107312 Shielded cable w/o conn.; 10 wire, for Series H25, H26, X25, w/full differential outputs 3 DI R CF 

107865-0010 10 foot cable assembly w/mating connector for 10, 12 bit AI25 abs. encoder, 17 pin end-mount connector 3 DI R 194.00 

107865-XXXX As Above, Custom Length 3 DI N CF 

108594-0010 10 foot cable assembly w/mating connector for H20 & HS35 encoder; 6 pin single ended 3 DI R 77.00 


108595-0010 10 foot cable assembly w/mating connector for H20/H58 & HS35 encoder; 7 pin single ended 3 DI R 77.00 


108596-0010 10 foot cable assembly w/mating connector for H20 & HS35 encoder; 7 pin dif. line dr., no idx 3 DI R 77.00 


108615-0010 10 foot cable assembly w/mating connector for H58 & HS35 encoder; 12 pin CCW 3 DI R 137.00 


108616-0010 10 foot cable assembly w/mating connector for H58 encoder; 12 pin CW 3 DI R 140.00 


108680-0001 L bracket mounting base for H20, 21/22 encoders 3 DI R 142.00 

109296-0001 Replacement flexible mount for Series H20 Hub Shaft 3 DI N 90.00 

109473-0001 Tether Kit for HS35; 3/8" bolt, 5.88" circ. 3 DI R 34.00 

109473-0002 Tether Kit for HS35; 1/2" bolt, 7.25" circ. 3 DI R 34.00 

109473-0003 Tether Kit for HS35; 2.5" to 4" circ. 3 DI R 44.00 

109888-0001 AC/DC Motion Detector - Low Speed 3 DM R 513.00 

109888-0002 AC/DC Motion Detector - High Speed 3 DM R 513.00 

110158-0010 10 foot cable assembly w/mating connector for 10, 12 bit AI25 abs. encoder, 19 pin side-mount connector 3 DI R 216.00 


110533-0001 Cover Kit,56C face 3 DI R 77.00 

110533-0002 Cover Kit,fan cover 3 DI R 77.00 

110533-0003 Dual Cover Kit,56C face 3 DI R 77.00 

110533-0004 Dual Cover Kit,fan cover 3 DI R 77.00 

† 





53


Model 



111328-0001 Qube pivot mount bracket 3 DI R 123.00 

112076-0010 10 foot cable assembly w/mating connector for 13 bit AI25 abs. encoder, 19 pin side-mount connector 3 DI R 261.00 


112077-0010 10 foot cable assembly w/mating connector for 14 bit AI25 abs. encoder, 19 pin side-mount connector 3 DI R 261.00 

112077-XXXX As Above, Custom Length 3 DI R CF 

112096-0001 Tether Kit for HS20 (clearance hole for 3/8" bolt on 5.88" diameter bolt-circle) 3 DI N 45.00 

112096-0002 Tether Kit for HS20 (slotted hole for bolt on 1.87" to 2.75" radius) 3 DI N 45.00 

112105-0001 Protective Cover Accessory for HS20 3 DI R 34.00 

112121-0001 Spare Hub Clamp (Bore size Code 3:0 -9) — — — 40.00 

112121-0002 Spare Hub Clamp (Bore size Code 3:A -H) — — — 40.00 

112859-0015 15 foot cable assembly with 5-pin M12 connector 15 DI N 52.00 


112859-XXXX Custom Length assembly with 5-pin M12 connector 15 DI N CF 



112860-XXXX Custom Length assembly with 8-pin M12 connector 15 DI N CF 

1129190001 Measuring wheel; white rubber; 3/8" bore; 12" circumference 3 DI R 129.00 

1140640001 Adapter Kit, CSA Div. 2, Group F & G Cert. 3 DI R 203.00 

1140740010 D3 Mating Cable, 10 ft. 3 DI R 166.00 

114074XXXX As Above, Custom Length 3 DI N CF 

114573-0001 Tether kit, 4.5" C-face, HS35R 3 DI R 50.00 

114574-0001 Tether kit, Slotted, HS35R 3 DI R 50.00 

114575-0001 Tether kit, 8.5" C-face, HS35R 3 DI R 50.00 

114591-0001 Cover Kit, 56-C face, HS35R 3 DI R 74.00 

114592-0001 Cover Kit, Fan shroud, HS35R 3 DI R 74.00 

114593-0001 Dual Cover Kit, 56-C face, HS35R 3 DI R 74.00 

114594-0001 Dual Cover Kit, fan shroud, HS35R 3 DI R 74.00 

114928-0001 Dual Cover Kit,180C-face 3 DI R 89.00 

14002030010 Cable assembly; use with Series 52, 2 wires; 10' length 3 DI R 77.00 


14002090010 Cable assembly; use with 60 series, armored cable; 6 wires; 10' length 3 DI R 126.00 


1400334-0010 Cable assembly; use with Series 53Z, 3 wires; 10' length 3 DI R 85.00 


14004190010 Cable assembly; use with 60 series, full differential; 9 wires; 10' length 3 DI R 149.00 


14004310010 Cable assembly; use with Series H25, H26, H42, 22, 7 wires; 10' length 3 DI R 85.00 


14005730000 L bracket mounting base for H42, H25, and 60 series Encoders 3 DI R 142.00 

14005740000 Pivot mounting bracket 3 DI R 291.00 

14005750000 Universal tracking mounting base 3 DI R 453.00 

14006070010 Cable assembly; use with Series 22 (w/o markers), 6 wires; 10' length 3 DI R 85.00 


14006350010 Cable assembly; 10 pin MS; 10' length 3 DI R 142.00 


14006640010 Cable assembly; use with Series 21/22, pin line driver; 6 wires, 10' length 3 DI R 90.00 


16002070010 Measuring wheel; phenolic; 1/2" bore; temperature rating = -30 to +140_C; 12" circumference 3 DI R 110.00 

16002070011 Measuring wheel; for 60 series Rotopulsers, 1/2" bore; temperature rating: -30 to +70_C; 12" circumference 3 DI R 178.00 

16002070177 Measuring wheel; phenolic; 3/8" bore; temperature rating = -30 to +140_C; 12" circumference 3 DI R 102.00 

16002070215 Measuring wheel; Obsolete; Repalced by 112919-0001 — — — — 

16002070284 Measuring wheel; for encoders with 3/8" bore; temperature rating: -30 to +70_C; 12" circumference 3 DI R 178.00 

16002160022 Shielded cable, 3 wire — — — $2/Ft 

16002160024 Shielded cable, 6 wire — — — $4/Ft 

16002160029 Shielded cable, 4 pair — — — $5/Ft 

22-_ _ _ _-_ _ _ Series 22 Qube; see Table of Contents, page 1 — — — — 

22M-_ _ _ _-_ _ Series 22 Qube; see Table of Contents, page 1 — — — — 

† 




54 



Model 



53Z Pickup for gear; heavy duty, zero speed, magneto-resistive 3 DI R 273.00 

5PY1 5PY adapter kit for 2.5" flange mount encoders 3 DI R 119.00 

5PY2 5PY adapter kit for 60A encoders 3 DI R 119.00 

5PY3 5PY adapter kit for 2.5" servo mount encoders 3 DI R 128.00 

605106-1 Replacement for E14 Integral Coupling (1/4" shaft) 3 DI R 66.00 

605106-3 Replacement for E14 Integral Coupling (3/8" shaft) 3 DI R 85.00 

605213 Clamp for 54Z Pickup 3 DI R 18.00 

605512-0020 Flexible coupling; 3/8", 1/4", 3/8", 1/2" 3 DI R 74.00 

62-_ _ _ _-_ _ _ Heavy-duty Rotopulser; see Table of Contents, page 1 — — — — 

62P-_ _ _ _-_ _ Heavy-duty Rotopulser; see Table of Contents, page 1 — — — — 

63-_ _ _ _-_ _ _ Heavy-duty Rotopulser; see Table of Contents, page 1 — — — — 

63P-_ _ _ _-_ _ Heavy-duty Rotopulser; see Table of Contents, page 1 — — — — 

702257-0001 Technical manual - DeviceNet 3 P N 22.00 

702258-0001 Technical manual - Profibus 3 P N 22.00 

702259-0001 Technical manual - Interbus 3 P N 22.00 

† 





55

NorthStar brand 


Series HSD35 DC = NI; RC = N Lead Time = 3 days Encoder Catalog 

Code 1: Model 

HSD35 

HSD35 Heavy-duty, 

hollowshaft 

encoder 

Code 2: PPR 

0001 

0003 

0010 

0012 

0015 

0032 

0050 

0060 

0100 

0120 

0200 

0240 

0250 

0300 

0360 

0500 

0512 

0600 

0900 

1000 

1024 

1200 

1500 

2000 

2048 

2400 

2500 

3072 

4000 

4096 

5000 


0 6mm 

1 1/4" 

2 5/16" 

3 8mm 

4 3/8" 

5 10mm 

6 12mm 

7 1/2" 

8 5/8" 

9 15mm 

A 16mm 

C 19mm 

D 3/4" 

E 20mm 

F 7/8" 

G 24mm 

H 1" 

J 1-1/8" 

K 1-1/4" 

M 14mm 

N 18mm 

P 25mm 

R 28mm 

Stamped Metal 

0 None 

1 4.5" C-Face tether 

2 8.5" C-Face tether 

3 Slotted tether 



6 Same as 2 w/ 

180 C-face cover 

(single or dual 

output) 

Code 4: Fixing Code 5: Output Format 


Swivel Rod 

A AC motor fan cover 

tether with T-bolt 

B 4.5" C-face tether 

with 3/8" bolt 

C 8.5" C-face tether 

with 1/2" bolt 

D Same as "A" w/ 

cover kit 

E Same as "B" w/ 

cover kit 

0 Single Ended ABZ, 5-26VDC push-pull 

1 Single Ended ABZ, 5-26VDC O/C 

2 Single Ended ABZ, 5-26VDC O/C w2.2kOhm 

4 Differential AB only, 5-26, 5-26 out (7272) 

5 Differential AB only, 5-26 in, 5V out (7272 

A Differential AB, 5-26V in, 5V out (4469) 

C Differential AB, 5-15V in, 5-15V out (4469) 

6 Differential ABZ, 5-26 in, 5V out (7272) 

7 Differential ABZ, 5-26 in, 5-26 out (7272) 



D Dual isolated outputs, same as "6" 

E Dual isolated outputs, same as "7" 

F Dual isolated outputs, same as "8" 

G Dual isolated outputs, same as "9" 








Q Same as "D" with Extended temp range 

R Same as "E" with Extended temp range 


Blank None 


HSD35 

Base 

Price 

$619 

1-1024 n/c 0-9 n/c 

1200-2500 A-R add $26 

add $26.00 

3072-5000 

add $36.00 

0-3 n/c 

4, 5 add $31.00 

6 add $83.00 

A-C n/c 

D, E add $31.00 

0, H add $10 

1,2,J,K n/c 

4-7,L,M,N,P add $10 

8-9 add $26 

A,C add $26 

D,E,Q,R add $218 

F-G add $234 

n/c 

Accessories 




114622-0001 Cover Kit, 56C-face, Single/Dual $79.00 


114623-0001 Cover Kit, Fan Cover, Single/Dual $91.00 

† 




56 




SLIM Tach HS56 - Single Output 

Note: Although typical leadtime is 5 days, certain combinations 

can affect leadtime. Please consult the factory before ordering 

DC= NM; RC = N 


Code 1: Model 

H5 

Code 2: PPR 

Code 3: Index 

Code 4: Wheel Bore 



H5 Hollow 

Shaft 

Mount 

0064 

0128 

0256 

0512 

1024 

2048 

L 

No Index 


Code 2 is 0512, 

1024 or 2048 

G Gated 

Differential 

Index 

Z 

Differential 

Index (Z, — Z) 


J04 5/8" bore 

J05 7/8" bore 

J06 1.00" bore 

J07 1-1/8" bore 

C Latching Industrial 

Connector with 

1/2” NPT 

M 10 pin MS 

Connector 

P 18” pigtail cable 

Q Latching Industrial 

Connector on 18” 

pigtail cable 

L 5-15V in, 5-15V Line 

Driver (4428) out 

V 5-26V in, 5-26V 

Line Driver (IC-WE) 

out 

5 5-15V in, 5V 

Line Driver (4428) 

out 

Differential, 

bidirectional signals 

(A, — A, B, — B) 


H5 Base 

Price 

$1,234.00 

0064 thru 1024 

n/c 

2048 

add $83.00 

G add $208..00 

L n/c 

Z add $52.00 

J04 thru J07 n/c C add $78.00 L n/c 

M add $68.00 V add $78.00 

P 

n/c 5 add $52.00 

Q add $146.00 

† 





57



SLIM Tach HS56 - Dual Output 





Code 1: Model 

HD 

Code 2: PPR 

Code 3: Index 




HD Hollow 

Shaft 

Mount 

Dual 

Output 

0064 

0128 

0256 

0512 

1024 

2048 

L 

No Index 


Code 2 is 0512, 

1024 or 2048 

G Gated 

Differential 

Index 

Z 

Differential 



J04 5/8" bore 

J05 7/8" bore 

J06 1.00" bore 

J07 1-1/8" bore 



1/2” NPT 

M 10 pin MS 

Connector 



Connector on 18” 

pigtail cable 

L 5-15V in, 5-15V Line 

Driver (4428) out 

V 5-26V in, 5-26V 


out 

5 5-15V in, 5V 


out 

Differential, 


(A, — A, B, — B) 


HD Base 

Price 

$1,769.00 

0064 thru 1024 

n/c 

2048 

add $166.00 

G add $260.00 

L n/c 

Z add $52.00 

J04 thru J07 n/c C add $156.00 L n/c 

M add $125.00 V add $156.00 

P 

n/c 5 add $104.00 

Q add $291.00 

† 




58 




Series HS60 Hollowshaft Encoder 

Code 1: Model 

6 

H6 HS60 

Hollowshaft, 

single output 

D6 Dual output 

H6 Base Price 

$1,428.00 

D6 Base Price 

$2,113.00 

Code 2: PPR 

0064 

0128 

0256 

0512 

1024 

2048 

0064 thru 1024 

N/C 

2048 

Add $85.00 

Code 3: Index 

L No index 

available 

when code 2 

is 0512, 1024, 

or 2048 

G With 

Gated, 

differential 

index 

Z With 

differential 

index 

L 

N/C 

When Code: A 

is H6 

Z Add 

$54.00 

G Add 

$214.00 

When Code: A 

is D6 

Z Add 

$107.00 

G Add 

$268.00 


T 

T01 1-1/8" 

T02 1-3/8" 

T03 1-5/8" 

T04 1-7/8" 

T05 2.00" 

T06 2-1/8" 

T07 2-1/4" 

T08 2-3/8" 

T09 2-1/2" 

T10 2-7/8" 

Metric bore sizes 

available. Consult 

factory for details. 

T01 thru T02 N/C 

T03 thru T07 Add 

$268.00 

T08 thru T10 Add 

$375.00 



DC= NI; RC = N 

C Latching Industrial Connector with 1/2" NPT 

M 10 pin MS Connector 

P 18" pigtail cable 

Q Latching industrial connector on 18" pigtail 

cable 


P N/C 

When Code: A is H6 

C add $80.00 

M add $64.00 

Q add $150.00 

When Code: A is D6 

C add $161.00 

M add $129.00 

Q add $300.00 

† Lead Time (Days) = CF Encoder Catalog 


L 5-15VDC in, 5-15V 

Line driver (4428) 

out 

V 5-26VDC in, 5-26V 

Line driver 

(IC-WE) out 

5 5-15VDC in, 5V 

Line driver (4428) 

out 

Differential, bidirectional 

signals 

L N/C 

V N/C 

5 N/C 

Code 7: Seal 

L Labyrinth seal 

V V-ring seal 

L N/C 

V N/C 

Spare mating Latching Industrial connector: NSH5C; Spare mating 10 pin MS connector: MCN-N6 

5 foot Interface Cable: RIMCABLEDB10005. Other Length: final 4 digits is length in 5 ft increments. Example RIMCABLEDB10065 is 65 feet. 

† 





59



Series HD20 DC = NI; RC = N Lead Time = Consult Factory Encoder Catalog 

Code 1: Model 

HD20 

Size 20 

Heavy Duty 

Encoder 



3 Bidirectional with 

Index 

Code 2: PPR 

0001 

0010 

0024 

0025 

0035 

0040 

0060 

0100 

0120 

0192 

0200 

0240 

0250 

0256 

0300 

0360 

0500 

0512 

0600 

0625 

0720 

1000 

1024 

1200 

1250 

1440 

2000 

2048 

2500 

2540 

2600 

3600 

Code 3: Shaft 

0 3/8" Dia. 

Shaft with 

flat 

4 10mm 

Dia. Shaft, 

no flat 



0 5-26V in, 5-26V 


(7273) 

2 5-26V in, 5-26V 

Push-Pull out 

F 5-26V in, 5-26V 


(2222) 

G 5-26V in, 5-26V 


with 2.2 kΩ Pullups 

(2222) 

available when: Code 1 

is 1,2 and Code 5 is 3 

through H, or Code 1 

is 3 and Code 5 is 5 

through H: 

3 5-26V in, 5-26V 



4 5-26V in, 5V 




1 6 Pin Connector 



D 

E 

F 

G 

H 

18" Sealed Cable 

3’ Sealed Cable 





0 No Options 

1 Nickel Finish Housing 

2 Stainless Steel Housing 

3 Redundant Outputs (Dual Connector 

Housing). 

4 Nickel Finish Housing with Redundant 

Outputs. 

5 Stainless Steel Housing with 

Redundant Outputs. 


HD20 

Base Price 

1 

$ 420.00 

2 or 3 

$432.00 

0001 

thru 

3600 

N/C 

0 thru 4 

N/C 

0 thru 4 

N/C 

F thru G 

N/C 

1 thru D 

N/C 

E add $6.00 

F add $12.00 

G add $22.00 

H add $32.00 

0 N/C 

1 add $54.00 

2 add $536.00 

3 add $156.00 

4 add $209.00 

5 add $691.00 

† 




60 




ATEX Series HD20 DC = NI; RC = N Lead Time = Consult Factory Encoder Catalog 

Code 1: Model 

HD20 

Size 20 

Heavy Duty 

Encoder 




Index 

Code 2: PPR 

0001 

0010 

0024 

0025 

0035 

0040 

0060 

0100 

0120 

0192 

0200 

0240 

0250 

0256 

0300 

0360 

0500 

0512 

0600 

0625 

0720 

1000 

1024 

1200 

1250 

1440 

2000 

2048 

2500 

2540 

2600 

3600 

Code 3: Shaft 

0 3/8" Dia. 

Shaft with 

flat 

4 10mm 

Dia. Shaft, 

no flat 



0 Open Collector out 1 6 Pin Connector 

(7273) 


2 Push-Pull out 

F Open Collector out 5 10 Pin Connector 

(2222) 

D 18" Sealed Cable 

G Open Collector out 


E 3’ Sealed Cable 

(2222) 

F 6’ Sealed Cable 


is 1,2 and Code 5 is 3 

through H, or Code 1 

is 3 and Code 5 is 5 

through H: 

3 Differential Line 




G 

H 




*Note: Available ATEX Certified 

Options 

ATEX Type 1: ATEX 

Certified; 5V in, 5V out only 

ATEX Type 2: ATEX Certified; 

7-26V in, 7-26V out 


7-26V in, 5V out 


A No Option w/ ATEX Type 1 

B Nickel Finish Housing w/ ATEX Type 1 

C Stainless Steel Housing w/ ATEX Type 1 

G Same as "A" w/ ATEX Type 2 

H Same as "B" w/ ATEX Type 2 

I Same as "C" w/ ATEX Type 2 

Available when Code 4 is 2, 3, 4 

M Same as "A" w/ ATEX Type 3 

N Same as "B" w/ ATEX Type 3 

O Same as "C" w/ ATEX Type 3 

D Redundant Outputs (Dual Connector 

Housing) w/ ATEX Type 1. See †NOTE 

E Nickel Finish Housing, Redundant Outputs 

w/ ATEX Type 1. See †NOTE 

F Stainless Steel Housing, Redundant 

Outputs w/ ATEX Type 1. See †NOTE 

J Same as "D" w/ ATEX Type 2. See †NOTE 

K Same as "E" w/ ATEX Type 2. See †NOTE 

L Same as "F" w/ ATEX Type 2. See †NOTE 


P Same as "D" w/ ATEX Type 3. See †NOTE 

Q Same as "E" w/ ATEX Type 3. See †NOTE 

R Same as "F" w/ ATEX Type 3. See †NOTE 

† NOTE: Simultaneous use of 

redundant outputs may void ATEX 

certification. Consult factory for 

details. 


HD20 

Base Price 

1 

$ 420.00 

2 or 3 

$432.00 

0001 

thru 

3600 

N/C 

0 thru 4 

N/C 

0 thru 4 

N/C 

F thru G 

N/C 

1 thru D 

N/C 

E add $6.00 

F add $12.00 

G add $22.00 

H add $32.00 

A, G, M add $536.00 

B, H, N add $589.00 

C, I, O add $1071.00 

D, J, P add $691.00 

E, K, Q add $745.00 

F, L, R add $1227.00 

† 





61



Series HD25 DC = NI; RC = N Lead Time = Consult Factory Encoder Catalog 

Code 1: Model 

HD25 

Size 25 

Heavy Duty 

Encoder 




Index 

Code 2: PPR 

0001 

0024 

0025 

0035 

0040 

0050 

0060 

0100 

0120 

0192 

0200 

0240 

0250 

0256 

0300 

0360 

0500 

0512 

0600 

0625 

0720 

0900 

1000 

1024 

1200 

1250 

1440 

1524 

1600 

1800 

2000 

2048 

2500 

2540 

2600 

3600 

4096 

5000 

Code 3: Shaft 

0 3/8" Dia. 

Shaft with 

flat 

4 10mm 

Dia. Shaft, 

with flat 

6 12mm Dia. 

Shaft 




0 5-26V in, 5-26V 



(7273) 


2 5-26V in, 5-26V 


Push-Pull out 

F 5-26V in, 5-26V 

9 5 Pin M12 Connector 

Open Collector out A 8 Pin M12 Connector 

(2222) 


G 5-26V in, 5-26V 

Open Collector out E 3’ Sealed Cable 


(2222) 

F 6’ Sealed Cable 

Available when: 

G 10’ Sealed Cable 

Code1 is 1, 2 and H 15’ Sealed Cable 

Code 5 is 3,5 or D 

through P, or Code 1 

P 5m Sealed Cable 

is 3 and code 5 is 5 

or D through P: 

3 5-26V in, 5-26V 



4 5-26V in, 5V 



6 5-15V in, 5-15V 




0 No Options 

1 Nickel Finish Housing 

2 Stainless Steel Housing 

3 Redundant Outputs (Dual Connector 

Housing). See † NOTE 

4 Nickel Finish Housing with Redundant 

Outputs. See † NOTE 

5 Stainless Steel Housing with 

Redundant Outputs. See † NOTE 


HD25 

Base Price 

1 

$489.00 

2 or 3 

$501.00 

0001 

thru 

5000 

N/C 

0 thru 4 

N/C 

6 add 

$55.00 

0 thru 6 

N/C 

F thru G 

N/C 

1, 3, 5, D N/C 

9, A add $38.00 

E add $6.00 

F add $13.00 

G add $22.00 

H add $33.00 

P add $33.00 

0 N/C 

1 add $55.00 

2 add $546.00 

3 add $159.00 

4 add $213.00 

5 add $705.00 

† 




62 




ATEX Series HD25 DC = NI; RC = N Lead Time = Consult Factory Encoder Catalog 

Code 1: Model 

HD25 

Size 25 

Heavy Duty 

Encoder 




Index 

Code 2: PPR 

0001 

0024 

0025 

0035 

0040 

0050 

0060 

0100 

0120 

0192 

0200 

0240 

0250 

0256 

0300 

0360 

0500 

0512 

0600 

0625 

0720 

0900 

1000 

1024 

1200 

1250 

1440 

1524 

1600 

1800 

2000 

2048 

2500 

2540 

2600 

3600 

4096 

5000 

Code 3: Shaft 

0 3/8" Dia. 

Shaft with 

flat 

4 10mm 

Dia. Shaft, 

with flat 

6 12mm Dia. 

Shaft 



0 Open Collector out 1 6 Pin Connector 

(7273) 


2 Push-Pull out 

F Open Collector out 5 10 Pin Connector 

(2222) 

9 5 Pin M12 Connector 

G Open Collector out 


A 8 Pin M12 Connector 

(2222) 


Available when: 

Code1 is 1, 2 and 

Code 5 is 3,5 or D 

through P, or Code 1 

is 3 and code 5 is 5 

or D through P: 








E 

F 

G 

H 

P 






5m Sealed Cable 

*Note: Available ATEX Certified 

Options 


5V in, 5V out only 


7-26V in, 7-26V out 


7-26V in, 5V out 


5-15V in, 5-15V out 


A No Options w/ ATEX Type 1 

B Nickel Finish Housing w/ ATEX Type 1 

C Stainless Steel Housing w/ ATEX Type 1 

D Redundant Outputs (Dual Connector 

Housing) w/ ATEX Type 1. See †NOTE 

E Nickel Finish Housing, Redundant 


F Stainless Steel Housing, Redundant 


G Same as "A" w/ ATEX Type 2 

H Same as "B" w/ ATEX Type 2 

I Same as "C" w/ ATEX Type 2 

J Same as "D" w/ ATEX Type 2. See †NOTE 

K Same as "E" w/ ATEX Type 2. See †NOTE 

L Same as "F" w/ ATEX Type 2. See †NOTE 


M Same as "A" w/ ATEX Type 3 

N Same as "B" w/ ATEX Type 3 

O Same as "C" w/ ATEX Type 3 

P Same as "D" w/ ATEX Type 3. See †NOTE 

Q Same as "E" w/ ATEX Type 3. See †NOTE 

R Same as "F" w/ ATEX Type 3. See †NOTE 

Available when Code 4 is 6: 

S Same as “A”, w/ATEX Type 4 

T Same as “B”, W/ATEX Type 4 

U Same as “C”, w/ATEX Type 4 

V Same as “D”, w/ATEX Type 4. See †NOTE 

W Same as “E”, w/ATEX Type 4. See †NOTE 

Y Same as “F”, w/ATEX Type 4. See †NOTE 


redundant outputs may void 

ATEX certification. Consult 

factory for details. 

HD25 

Base Price 

1 

$489.00 

2 or 3 

$501.00 

0001 

thru 

5000 

N/C 

0 thru 4 

N/C 

6 add 

$55.00 

0 thru 6 

N/C 

F thru G 

N/C 

1, 3, 5, D N/C 

9, A add $38.00 

E add $6.00 

F add $13.00 

G add $22.00 

H add $33.00 

P add $33.00 

A, G, M, S add $546.00 

B, H, N, T add $601.00 

C, I, O, U add $1092.00 

D, J, P, V add $705.00 

E, K, Q, W add $759.00 

F, L, R, Y add $1251.00 

† 





63



Series HSD25 DC = NI; RC = N Lead Time = Consult Factory Encoder Catalog 

Code 1: Model 

HSD 25 

HSD25 Heavy Duty 

Hub Shaft 

Encoder 

Code 2: PPR 

0001 

0010 

0024 

0025 

0035 

0040 

0060 

0100 

0120 

0192 

0200 

0240 

0250 

0256 

0300 

0360 

0500 

0512 

0600 

0625 

0720 

1000 

1024 

1200 

1250 

1440 

2000 

2048 

2500 

2540 

2600 

3600 


0 6mm 

1 1/4" 

2 5/16" 

3 8mm 

4 3/8" 

5 10mm 

6 12mm 

7 1/2" 

8 5/8" 

9 15mm 

A 16mm 

C 19mm 

D 3/4" 

**Note: Tether may be required for 

proper encoder operation and may be 

supplied by the customer or ordered 

as the following accessories: 

113764-0001 Single Point Tether Kit 

113766-0001 Slotted Tether Kit 

Code 4: Output Format 



1 Single Ended ABZ, 5-26VDC Open collector (7273) 



w/2.2kOhm 

Options 4 & 5 not available when Code 5 is H; and 

Code 6 is 3, 4, 5 

4 Differential AB only, 5-26 in, 5-26 out (7272) 

5 Differential AB only, 5-26 in, 5V out (7272) 

Options 6 & 7 not available when Code 5 is 0, 1, 5, 6, H; and 

Code 6 is 3, 4, 5 




0 6 pin 

1 7 pin 

2 10 pin 

4 10 pin Bayonet 




8 12 CW pin+mating 

A .5m (20") cable 



E 3m (118") cable 

L 4m (157") cable 

H 5 pin M12 

J 8 pin M12 

K 1.5 ft (18") cable w/ in 

line 10pin connector 

M 5 ft (60") cable 

N 10 ft (120") cable 

P 1.5 ft (18”) Cable with 

10-pin Bulkhead 

Connector 

Code6: Options 

0 No Options 

1 Slotted Tether 

2 Single point 

tether 

3 No tether, Dual 

isolated outputs 

4 Slotted Tether, 

Dual isolated 

Outputs 

5 Single Point 

Tether, Dual 

isolated Outputs 

Code 7: Special Options 

Blank None 

01 Nickel Plated 

02 Stainless Steel 


HSD25 

Base Price 

$480.00 

15 to 1200 

N/C 

2000 to 3600 

Add $27.00 

0 to D 

N/C 

0 to 7 

N/C 

0 to 4 N/C 

5, 6 Add 

$10.00 

7, 8 Add 

$16.00 

A Add 

$3.00 

C Add 

$6.00 

D Add 

$12.00 

E Add 

$22.00 

H Add 

$27.00 

J Add 

$37.00 

K Add 

$27.00 

L Add 

$32.00 

M Add 

$54.00 

N Add 

$80.00 

P Add 

$27.00 

0 to 2 

N/C 

3 to 5 

Add $156.00 

01 

Add $54.00 

02 

Add $536.00 

10 foot Cable Assemblies with MS Connector 

108594-0010 6 Pin MS, Cable Assy. For Single Ended Outputs $77.00 


108596-0010 7 Pin MS, Cable Assy. For Differential Line Driver w/o Index Outputs $77.00 

1400635-0010 10 Pin MS, Cable Assy. For Differential Line Driver with Index Outputs $142.00 

109209-0010 NEMA4 10 pin MS, Cable Assy. For differential line driver with index outputs $142.00 

15 foot Cable Assemblies with M12 Connector 

112859-0015 5 Pin M12, Cable Assy. For Single Ended Outputs $52.00 

112860-0015 8 Pin M12, Cable Assy. $86.00 

† 




64 




Series ISD25 DC = NI; RC = N Lead Time = Consult Factory Encoder Catalog 

Code 1: Model 

ISD 25 

ISD25 ATEX 

Intrinsically 

Safe Hub 

Shaft 

Encoder 

Code 2: PPR 

0001 

0010 

0024 

0025 

0035 

0040 

0060 

0100 

0120 

0192 

0200 

0240 

0250 

0256 

0300 

0360 

0500 

0512 

0600 

0625 

0720 

1000 

1024 

1200 

1250 

1440 

2000 

2048 

2500 

2540 

2600 

3600 


0 6mm 

1 1/4" 

2 5/16" 

3 8mm 

4 3/8" 

5 10mm 

6 12mm 

7 1/2" 

8 5/8" 

9 15mm 

A 16mm 

C 19mm 

D 3/4" 

**Note: Tether may be required for 

proper encoder operation and may be 

supplied by the customer or ordered 

as the following accessories: 

113764-0001 Single Point Tether Kit 

113766-0001 Slotted Tether Kit 


redundant outputs may void ATEX 

certification. Consult factory for 

details. 



A Single Ended ABZ, 7-26 in, 7-26 out push-pull (7272) 

C Single Ended ABZ, 5V in, 5V out push-pull (7272) 

D Single Ended ABZ, 7-26V in, 7-26V out Open Collector (7273) 

E Single Ended ABZ, 7-26V in, 7-26V out Open Collector (2222) 

F Single Ended ABZ, 7-26V in, 7-26V out Open Collector 

w/2.2kOhm pullup (2222) 

Options G, H & J not available when Code 5 is H and 

Code 6 is 3, 4, 5 

G Differential AB only, 5V in, 5V out (7272) 

H Differential AB only, 7-26 in, 7-26 out (7272) 

J Differential AB only, 7-26 in, 5V out (7272) 

Options K, L & M not available when Code 5 is 0, 1, 5, 6, H 

and Code 6 is 3, 4, 5 

K Differential ABZ, 5V in, 5V out (7272) 

L Differential ABZ, 7-26 in, 7-26 out (7272) 

M Differential ABZ, 7-26 in, 5V out (7272) 


0 6 pin 

1 7 pin 

2 10 pin 





8 12 CW pin+mating 

A .5m (20") cable 



E 3m (118") cable 

L 4m (157") cable 

H 5 pin M12 

J 8 pin M12 




N 10 ft (120") cable 



Connector 

Code6: Options 

0 No Options 


2 Single point 

tether 

3 No tether, Dual 

isolated outputs 

4 Slotted Tether, 

Dual isolated 

Outputs 

5 Single Point 

Tether, Dual 

isolated Outputs 

Code 7: Special Options 

Blank None 


02 Stainless Steel 


ISD25 

Base Price 

$834.00 

15 to 1200 

N/C 

2000 to 3600 

Add $27.00 

0 to D 

N/C 

A to M 

N/C 

0 to 4 N/C 

5, 6 Add 

$10.00 

7, 8 Add 

$16.00 

A Add 

$3.00 

C Add 

$6.00 

D Add 

$12.00 

E Add 

$22.00 

H Add 

$27.00 

J Add 

$37.00 

K Add 

$27.00 

L Add 

$32.00 

M Add 

$54.00 

N Add 

$80.00 

P Add 

$27.00 

0 to 2 

N/C 

3 to 5 

Add $156.00 

01 

Add $54.00 

02 

Add $536.00 

10 foot Cable Assemblies with MS Connector 



108596-0010 7 Pin MS, Cable Assy. For Differential Line Driver w/o Index Outputs $77.00 

1400635-0010 10 Pin MS, Cable Assy. For Differential Line Driver with Index Outputs $142.00 

109209-0010 NEMA4 10 pin MS, Cable Assy. For differential line driver with index outputs $142.00 

15 foot Cable Assemblies with M12 Connector 

112859-0015 5 Pin M12, Cable Assy. For Single Ended Outputs $52.00 

112860-0015 8 Pin M12, Cable Assy. $86.00 

† 





65




Code 1: Model 

HSD37 

HSD37 

Heavy Duty 

Hollowshaft 

Encoder 


To order, complete the model number with code numbers from the table below: 

Code 2: PPR Code 3: Shaft Code 4: Output Format 

Code 5: Termination Code 6: Options Code 7: Special Option 

0015 

0032 

0050 

0060 

0100 

0200 

0240 

0250 

0500 

0512 

0600 

1000 

1024 

1200 

2000 

2048 

3072 

4000 

4096 

5000 

0 6mm 

1 1/4" 

2 5/16" 

3 8mm 

4 3/8" 

5 10mm 

6 12mm 

7 1/2" 

8 5/8" 

9 15mm 

A 16mm 

C 19mm 

D 3/4" 

E 20mm 

F 7/8" 

G 24mm 

H 1" Non 

Isolated 

P 25mm 

Non 

Isolated 

R 1" Isolated 



1 Single Ended ABZ, 7-26VDC open collector (7273) 


3 Single Ended ABZ, 7-26VDC open collector 

w/1kOhm (2222) 

Options 4 & 5 not available when Code 5 is H 



Options 6 & 7 not available when Code 5 is 0, 1, 5, 6, H 






4 10 pin Bayonet connector 

5 6 pin+mating connector 



8 12 CW pin+mating connector 

9 10 pin Bayonet+mating 

connector 

A .5m (20") cable 



H 5 pin M12 connector 

J 8 pin M12 connector 




N 10 ft (120") cable 



Connector 


0, 1, 2, 3, A, C 

T Terminal box w/conduit 

entry 

0 No options 


2 Single point 4.5" 

C-face tether 


C-face tether 

4 Dual Isolated 

Outputs, No 

tether 


Outputs, Slotted 

Tether 


Outputs, 4.5" 

C-face tether 


Outputs, 8.5" 

C-face tether 

A Swivel Rod 

tether 

C Metric Swivel 

Rod tether 

D Dual Isolated 

Outputs, Swivel 

Rod Tether 

E Dual Isolated 

Outputs, Metric 

Swivel Rod 

Tether 

Blank None 


02 Stainless 

Steel 


HSD37 

Base Price 

$856.00 

15 to 1200 

N/C 

2000 to 3600 

Add $27.00 

Above 3600 

Add $44.00 

0 to 9 

N/C 

A to R 

N/C 

0 to 7 

N/C 

0 to 4 N/C 

5 to 6 Add $11.00 

7 to 9 Add $17.00 

A Add $3.00 

C Add $6.00 

D Add $13.00 

H Add $27.00 

J Add $38.00 

K Add $27.00 

M Add $55.00 

N Add $82.00 

P Add $27.00 

T Add $164.00 

0 to 3 N/C 

4 to 7 Add 

$159.00 

A, C Add 

$27.00 

D, E Add 

$186.00 

01 Add 

$55.00 

02 Add 

$546.00 

Accessories: 






114593-0001 Dual Cover Kit, 56-C face $74.00 


† 




66 




Series ISD37 DC = NI; RC = N Lead Time = Consult Factory Encoder Catalog 

Code 1: Model 

ISD37 

ISD37 

ATEX 

Intrinsically 

Safe 


To order, complete the model number with code numbers from the table below: 

Code 2: PPR Code 3: Shaft Code 4: Output Format 

Code 5: Termination Code 6: Options Code 7: Special Option 

0015 

0032 

0050 

0060 

0100 

0200 

0240 

0250 

0500 

0512 

0600 

1000 

1024 

1200 

2000 

2048 

3072 

4000 

4096 

5000 

0 6mm 

1 1/4" 

2 5/16" 

3 8mm 

4 3/8" 

5 10mm 

6 12mm 

7 1/2" 

8 5/8" 

9 15mm 

A 16mm 

C 19mm 

D 3/4" 

E 20mm 

F 7/8" 

G 24mm 

H 1" Non 

Isolated 

P 25mm 

Non 

Isolated 


A Single Ended ABZ, 7-26V in, 7-26V out push-pull (7272) 


D Single Ended ABZ, 7-26V in, 7-26 out push-pull (7272) 


F Single Ended ABZ, 7-26V in, 7-26V out Open Collector with 

1kOhm (2222) 

Options G , H & J not available when Code 5 is H 

G Differential AB only, 5V in, 5V out (7272) 

H Differential AB only, 7-26 in, 7-26 out (7272) 

J Differential AB only, 7-26 in, 5V out (7272) 

Options K, L, M not available when Code 5 is 0, 1, 5, 6, H 

K Differential ABZ, 5V in, 5V out (7272) 

L Differential ABZ, 7-26 in, 7-26 out (7272) 

M Differential ABZ, 7-26 in, 5V out (7272) 




4 10 pin Bayonet connector 





9 10 pin Bayonet+mating 

connector 

A .5m (20") cable 








N 10 ft (120") cable 



Connector 


0, 1, 2, 3, A, C 

T Terminal box w/conduit 

entry 

0 No options 



C-face tether 


C-face tether 


Outputs, No 

tether 


Outputs, Slotted 

Tether 


Outputs, 4.5" 

C-face tether 


Outputs, 8.5" 

C-face tether 

A Swivel Rod 

tether 

C Metric Swivel 

Rod tether 

D Dual Isolated 

Outputs, Swivel 

Rod Tether 

E Dual Isolated 

Outputs, Metric 

Swivel Rod 

Tether 

Blank None 


02 Stainless 

Steel 


ISD37 

Base Price 

$1222.00 

15 to 1200 

N/C 

2000 to 3600 

Add $27.00 

Above 3600 

Add $44.00 

0 to 9 

N/C 

A to P 

N/C 

A to M 

N/C 

0 to 4 N/C 

5 to 6 Add $11.00 

7 to 9 Add $17.00 

A Add $3.00 

C Add $6.00 

D Add $13.00 

H Add $27.00 

J Add $38.00 

K Add $27.00 

M Add $55.00 

N Add $82.00 

P Add $27.00 

T Add $164.00 

0 to 3 N/C 

4 to 7 Add 

$159.00 

A, C Add 

$27.00 

D, E Add 

$186.00 

01 Add 

$55.00 

02 Add 

$546.00 

Accessories: 








† 





67




Code 1: Model 

HSD38 

HSD38 Size 38 

Heavy-duty, 

hollowshaft 

encoder 

Code 2: PPR 

0015 

0032 

0050 

0060 

0100 

0200 

0240 

0250 

0500 

0512 

0600 

1000 

1024 

1200 

2000 

2048 

4000 

4096 

5000 


6 12mm 

9 15 mm 

7 1/2" 

8 5/8" 

A 16mm 

C 3/4" 

D 20mm 

E 7/8" 

T 5/8" 

Stainless 

Steel 

Collar 

not electrically 

isolated 

G 1" 

H 1" 

Stainless 

Steel 

Collar 








index (ABZ) 


is 3 or 4 and Code 

6 is 1, 2, 4, 6, 7, A, 

G, J or K: 



BB) 


is 3 or 4 and 

Code 6 is 2, 4, 7, A, 

G, J or K 






0 5-26V in, 5-26V 


(7273) 

1 5-30V in, 5-30V 

Push-Pull out 

2 5-26V in, 5-26V 

Push-Pull out 


is 3 or 4 

3 5-26V in, 5-26V 



4 5-26V in, 5V 








3 12 pin CW connector 


connector 

5 6 pin connector, plus 







connector plus mating 

connector 

9 12 pin CW connector, 

plus mating connector 

A 18" (.5m) cable 

B 36" (1m) cable 

C 72" (2m) cable 

D 144" (4m) cable 

G 13" (.3m) cable 

J 

K 

8 pin M12 connector 

18” (.5m) cable with 

10 pin in-line 

connector 


10-pin Bulkhead Connector 

available when: 

Code 5 is 0, 1 or 2 

H 

L 



w/special pinout 

Code 7: Option 

0 No Option 

1 Internally 

Isolated 1” 

bore 

2 Reverse 

phasing, 

no bore 

isolation 

3 Internally 

Isolated 1” 

bore, and 

Reverse 

Phasing 


0 Cast Aluminum 

Housing, 

Slotted Tether 

Included 

6 Cast Aluminum 

Housing, No 

Tether 

C Cast Aluminum 

Housing, 

Single-Point 

Tether Included 

(NEMA 4.5” 

C-face) 

D Same as “0” 

with Cover Kit 

E Same as “C” 


K Cast Aluminum 

Housing, 

Single-Point 

Tether Included 

(NEMA 8-1/2” 

C-face) 

N Same as “K” 


HSD38 

Base Price 

$660.00 

0015 

thru 

5000 

N/C 

6 - E, G 

N/C 

T, H 

add $54.00 

0 - 4 

N/C 

Accessory Kits: 

114619-0001 Single Point Tether Kit for 4-1/2” C-Face $50.00 

114620-0001 Slotted Tether Kit $50.00 

114621-0001, Single Point Tether Kit for 8-1/2” C-Face $50.00 

113310-0001 Bore Insert Kit, assortment of adapters allowing 

accomodation of all shaft sizes shown above in code 3 $492.00 

0, 1, 2, 3, 4 

N/C 

0 N/C 

1 N/C 

2 N/C 

3 N/C 

4 N/C 

5 add $10.00 

6 add $10.00 

7 add $16.00 

8 add $16.00 

9 add $16.00 

A add $3.00 

B add $6.00 

C add $12.00 

D add $32.00 

G N/C 

J add $37.00 

H add $37.00 

K add $54.00 

L add $37.00 

P add $27.00 

0 N/C 

1 add 

$86.00 

2 N/C 

3 add 

$86.00 





0 add $43.00 

6 N/C 

C add $43.00 

D add $86.00 

E add $86.00 

K add $43.00 

N add $86.00 

† 




68 




Series HD35R DC = NI; RC = N Lead Time = Consult Factory Encoder Catalog 

Code 1: Model 

HD35R 

HD35R 

Heavy Duty 

IEC Flange 

Encoder 

Code 2: PPR 

0001 

0003 

0010 

0012 

0015 

0032 

0050 

0060 

0100 

0120 

0200 

0240 

0250 

0300 

0360 

0500 

0512 

0600 

0900 

1000 

1024 

1200 

1500 

2000 

2048 

2400 

2500 

3072 

4000 

4096 

5000 


0 100mm IEC 

"Euro" 

flange, 

11mm 

shaft w/ 

4mm key 




1 Single Ended ABZ, 5-26VDC O/C 

2 Single Ended ABZ, 5-26VDC O/C w2.2kOhm 




4 Differential AB only, 5-26VDC, 5-26VDC out *(7272) 

5 Differential AB only, 5-26VDC in, 5VDC out *(7272) 

A Differential AB only, 5-15VDC in, 5VDC out *(4469) 

C Differential AB only, 5-15VDC in, 5-15VDC out *(4469) 



6 Differential ABZ, 5-26VDC in, 5VDC out *(7272) 

7 Differential ABZ, 5-26VDC in, 5-26VDC out *(7272) 

8 Differential ABZ, 5-15VDC in, 5VDC out *(4469) 

9 Differential ABZ, 5-15VDC in, 5-15VDC out *(4469) 



W ABZ, 10-24VDC Line Driver for over 80 meter cable runs 

* Line Driver Type 


0 Terminal Box, 

M20 gland 


0 Anodized 

Aluminum 


Blank None 

01 Wind Label 


HD35R 

Base Price 

$1071.00 

0001 

thru 

5000 

N/C 

N/C 0, H add $10 

0 N/C 

0 N/C 

1,2,J,K N/C 

4-7,L,M,N,P add $10 

8-9 add $27 

A,C add $27 

W add $54.00 

Blank N/C 

01 N/C 

Accessories: 114917-001, Isolated coupling, 11mm 

† 





69



Series DWD38 DC = NI; RC = N Lead Time = Consult Factory Encoder Catalog 

Code 1: Model 

DWD38 

Code 2: PPR 

Code 3: Shaft 





DWD38 

Draw Works Encoder 

0015 

0032 

0050 

0060 

0100 

0200 

0240 

0250 

0500 

0512 

0600 

1000 

1024 

1200 

2000 

2048 

4000 

4096 

5000 

0 1”-14 

UNS 

x 5/8” - 18 

UNF 

Threaded 

Shaft 

1 1”-14 

UNS 

Threaded 

Shaft 

2 1”-14 UNS 

x 5/8” - 18 

UNF Field 

Replaceable 

Threaded 

Shaft 




3 Single Ended ABZ, 7-26VDC open collector 

w/1kOhm (2222) 

Options 4 & 5 not available when Code 5 is H 



Options 6 & 7 not available when Code 5 is 0, 1, 5, 6, H 










A .5m (18") cable 








N 10 ft (120") cable 

0 Aluminum housing 

1 Nickel finish housing 

2 Stainless Steel housing 

3 Dual Isolated Outputs, 

Aluminum Housing 


Nickel Housing 


Stainless Steel Housing 


DWD38 

Base Price 

$856.00 

15 to 1200 

N/C 

2000 to 5000 

Add $27.00 

0 or 1 

N/C 

2 add $55.00 

0 to 7 

N/C 

0 to 2 N/C 

5, 6 Add $11.00 

7, 8 Add $17.00 

A Add $3.00 

C Add $6.00 

D Add $13.00 

0 N/C 

1 Add $55.00 

2 Add $546.00 

3 Add $159.00 

4 Add $213.00 

5 Add $705.00 

H Add $27.00 

J Add $36.00 

K Add $26.00 

M Add $52.00 

N Add $78.00 

† 




70 




Series ISW38 DC = NI; RC = N Lead Time = Consult Factory Encoder Catalog 

Code 1: Model 

ISW38 

Code 2: PPR 

Code 3: Shaft 





ISW38 

ATEX Intrinsically 

Safe 

0015 

0032 

0050 

0060 

0100 

0200 

0240 

0250 

0500 

0512 

0600 

1000 

1024 

1200 

2000 

2048 

4000 

4096 

5000 

0 1”-14 

UNS 

x 5/8” - 18 

UNF 

Threaded 

Shaft 

1 1”-14 

UNS 

Threaded 

Shaft 

2 1”-14 UNS 

x 5/8” - 18 

UNF Field 

Replaceable 

Threaded 

Shaft 

A Single Ended ABZ, 7-26V in, 7-26V out push-pull (7272) 


D Single Ended ABZ, 7-26V in, 5V out push-pull (7272) 


F Single Ended ABZ, 7-26V in, 7-26V out Open Collector (2222) 

G Single Ended ABZ, 7-26V in, 7-26V out Open 

Collector w/ 1kOhm (2222) 

Options H, J &K not available when Code 5 is H 

H Differential AB only, 5V in, 5V out (7272) 

J Differential AB only, 7-26 in, 7-26 out (7272) 

K Differential AB only, 7-26 in, 5V out (7272) 

Options L, M, P not available when Code 5 is 0, 1, 5, 6, H 

L Differential ABZ, 5V in, 5V out (7272) 

M Differential ABZ, 7-26 in, 7-26 out (7272) 

P Differential ABZ, 7-26 in, 5V out (7272) 

N Namur output, 15mA max 

† NOTE: Simultaneous use of redundant 

outputs may void ATEX certification. 

Consult factory for details. 








A .5m (18") cable 








N 10 ft (120") cable 

0 Aluminum housing 

1 Nickel finish housing 

2 Stainless Steel housing 


Aluminum Housing 


Nickel Housing 


Stainless Steel Housing 


ISW38 

Base Price 

$1222.00 

15 to 1200 

N/C 

2000 to 5000 

Add $27.00 

0 or 1 

N/C 

2 add $55.00 

A to M 

N/C 

0 to 2 N/C 

5, 6 Add $11.00 

7, 8 Add $17.00 

A Add $3.00 

C Add $6.00 

D Add $13.00 

H Add $27.00 

J Add $36.00 

K Add $26.00 

M Add $52.00 

N Add $78.00 

0 N/C 

1 Add $55.00 

2 Add $546.00 

3 Add $159.00 

4 Add $213.00 

5 Add $705.00 

† 





71


Series HSD44 DC = NI; RC = N 


ORDERING INFORMATION 

HSD44 Encoders 

Part Number Description Price 

HSD44T1024A3A Heavy Duty Encoder with 

18 inch pigtail wire connections $2,270.00 

HSD44T1024A3A-01 Heavy Duty Encoder with 

18 inch pigtail wire connections and 

extended pilot (.156") $2,270.00 

HSD44T1024A3K Heavy Duty Encoder with 

18 inch pigtail with 10 pin MS connector $2,331.00 

HSD44T1024A3K-01 Heavy Duty Encoder with 

18 inch pigtail with 10 pin MS connector and 

extended pilot (.156") $2,331.00 

Accessories 

Part Number Description Price 

HSD44ADAPTER45 4-1/2” NEMA Motor Adapter Plate Consult Factory 

HSD44ADAPTER85 8-1/2” NEMA Motor Adapter Plate Consult Factory 

Lead Time = Consult Factory 

† 




72 




Series EN42 DC = NI; RC = N Lead Time = 40 Encoder Catalog 

Code 1: Model 

EN42 

EN42 

ATEX Zone 1 

Barrier-Less 

Hollowshaft 

Encoder 

Code 2: PPR 

0015 

0032 

0100 

0200 

0240 

0250 

0500 

0512 

0600 

1000 

1024 

1200 

2000 

2048 

2500 

4000 

5000 


8 5/8" 

9 15 mm 

A 16mm 

D 3/4" 

F 7/8" 

H 1" 

Non- 

Isolated 

R 1" Isolated 

Code 4: ATEX Output 

Format 


0 Differential AB, 7-15V in, 

7-15V out 


5V out 

2 Differential ABZ, 7-15V 

in, 7-15V out 

3 Differential ABZ, 7-26V 

in, 5V out 


0 Dual Exit Terminal 

block, no gland 


block, 3/4" NPT, 

with Ex gland 

including S seal 

for .33" to .53" 

o.d. non-armored 

cables 


block, 3/4" NPT, 

with Ex gland 

including S seal 

for .33" to .53" 

o.d. armored 

cables 


0 None 

1 Heavy Duty 5/16" 

Swivel Rod 

Tether 

Code 7: Cover 

0 Standard Flat 

cover 


EN42 

Base Price 

$2,363.00 

n/c n/c 0, 2 n/c 

1, 3 add $17.00 

0 n/c 

1 add $55.00 

2 add $55.00 

0 n/c 

1 add $55.00 

0 n/c 

Series EN44 DC = NI; RC = N Lead Time = 40 Encoder Catalog 

Code 1: Model 

EN44 

EN44 

ATEX Zone 1 

Barrier-Less 

Hubshaft Encoder 

HN44 

Same as EN44 

but without ATEX 

Zone 1 

Ceriification 

Code 2: PPR 

1024 

2048 


A 16mm (5/8") 

Code 4: ATEX Output Format 



5-15V out 


5V out 

2 Differential ABZ, 7-15V in, 

7-15V out 

3 Differential ABZ, 7-26V in, 

5V out 



block, no gland 


block, 3/4" NPT, with 

Ex gland including S 

seal for .33" to .53" o.d. 

non-armored cables 


block, 3/4" NPT, with 

Ex gland including S 

seal for .33" to .53" o.d. 

armored cables 

EN44 

Base Price 

$2,598.00 

HN44 

Base Price 

$2,126.00 


n/c n/c 0, 2 n/c 

1, 3 add $17.00 

0 n/c 

1 add $55.00 

2 add $55.00 

† 





73



SLIM Tach RL67 





Code 1: Model 

S6 

S6 Motor 

Mount 

Ring, for 

4 1/2" 

NEMA 

56-C 

C-Face 

Motors 

or 

Reliance 

Electric 

Style 

6.75" 

Recess 

S6 

Code 2: PPR 

0064 

0128 

0256 

0512 

1024 

2048 

Base 0064 thru 1024 

Price 

n/c 

$954.00 

2048 

add $83.00 

Code 3: Index 

L 

No Index 


Code 2 is 0512, 

1024 or 2048 

Z Differential 


G Gated 

Differential 

Index 

L 

n/c 

Z add $52.00 

G add $208.00 




Code 7: Cover/Adapter 


J04 5/8" bore C Latching Industrial L 5-15V in, 5-15V C Standard Cover 

J05 7/8" bore 

Connector with Line Driver (4428) out F Flat Thru-hole cover 

1/2” NPT 

J06 1.00" bore 

J07 1-1/8" bore M 10 pin MS H Same as L with 

Connector extended temp. to 

K09 1-3/8" bore 

100°C 

K10 1-1/2" bore P 18” pigtail cable 

V 5-26V in, 5-26V 

K11 1-5/8" bore Q Latching Industrial Line Driver (IC-WE) 

K12 1-3/4" bore 

Connector on out 

18” pigtail cable 

K13 1-7/8" bore 

5 5-15V in, 5V 

K14 2.00" bore 

Line Driver (4428) out 

K15 2-1/8" bore 

K16 2-1/4" bore 

K17 2-3/8" bore 

Differential, 


K18 2-1/2" bore 

(A, — A, B, — B) 

K19 2-7/8" bore 

Additional Shaft 

Sizes Available 

Up to 3.75" 

Maximum 


J04 thru J07 n/c 

K09 thru K19 

add $83.00 

Not Listed 

add $111.00 

C add $78.00 

M add $68.00 

P 

n/c 

Q add $146.00 

L 

n/c 

H add $104.00 

V add $78.00 

5 add $52.00 

C 

n/c 

F add $57.00 

2013 PRICES NOT YET AVAILABLE 

† 




74 




SLIM Tach SL1250 - Single Output DC= NM; RC = N 




Code 1: Model 

S1 

S1 Motor 

Mount 

Ring, for 

12 1/2" 

NEMA 

C-Face 

Motors 

Single 

Output 

S1 

Code 2: PPR 

0064 

0128 

0256 

0512 

1024 


Price 

$1,742.00 

n/c 

Code 3: Index 

L 

No Index 


Code 2 is 0512, 

or 1024 



G Gated 

Differential 

Index 

L 

n/c 

Z add $52.00 

G add $208.00 






J04 5/8" bore C Latching Industrial L 5-15V in, 5-15V C No Cover 

J05 7/8" bore 


1/2” NPT 

J06 1.00" bore 

J07 1-1/8" bore D 1" extended H Same as L with 

height Latching extended temp. to 

K09 1-3/8" bore 

industrial 100°C 

K10 1-1/2" bore 

connector with V 5-26V in, 5-26V 

K11 1-5/8" bore 

1/2" NPT Line Driver (IC-WE) 

K12 

K13 

K14 

1-3/4" bore 

1-7/8" bore 

2.00" bore 

M 10 pin MS 

Connector 


out 

5 5-15V in, 5V 


K15 2-1/8" bore 


K16 2-1/4" bore 

Connector on 

K17 2-3/8" bore 

Differential, 



K18 2-1/2" bore 

(A, — A, B, — B) 

K19 2-7/8" bore 



Up to 3.75" 

Maximum 



K09 thru K19 

add $83.00 

Not Listed 

add $111.00 

C add $78.00 

D add $144.00 

M add $68.00 

P 

n/c 

Q add $146.00 

L 

n/c 

H add $104.00 

V add $78.00 

5 add $52.00 

C 

n/c 

F add $57.00 


† 





75



SLIM Tach SL1250 - Dual Output 





Code 1: Model 

D1 

D1 Motor 

Mount 

Ring, for 

12 1/2" 

NEMA 

C-Face 

Motors 

Dual 

Output 

D1 

Code 2: PPR 

0064 

0128 

0256 

0512 

1024 


Price 

$2,280.00 

n/c 

Code 3: Index 

L 

No Index 


Code 2 is 0512, 

or 1024 



G Gated 

Differential 

Index 

L 

n/c 

Z add $104.00 

G add $260.00 






J04 5/8" bore C Latching Industrial L 5-15V in, 5-15V C No Cover 

J05 7/8" bore 


1/2” NPT 

J06 1.00" bore 



K09 1-3/8" bore 


K10 1-1/2" bore 


K11 1-5/8" bore 


K12 

K13 

K14 

1-3/4" bore 

1-7/8" bore 

2.00" bore 

M 10 pin MS 

Connector 


out 

5 5-15V in, 5V 


K15 2-1/8" bore 


K16 2-1/4" bore 

Connector on 

K17 2-3/8" bore 

Differential, 



K18 2-1/2" bore 

(A, — A, B, — B) 

K19 2-7/8" bore 



Up to 3.75" 

Maximum 



K09 thru K19 

add $83.00 

Not Listed 

add $111.00 

C add $156.00 

D add $287.00 

M add $135.00 

P 

n/c 

Q add $291.00 

L 

n/c 

H add $208.00 

V add $156.00 

5 add $104.00 

C 

n/c 

F add $57.00 


† 




76 




SLIM Tach SL56 - Single Output 





Code 1: Model 

S5 

S5 Motor 

Mount 

Ring, for 

4 1/2" 

C-Face 

Motors 

(56C) 

Single 

Output 

S5 

Code 2: PPR 

0064 

0128 

0256 

0512 

1024 

2048 


Price 

n/c 

$722.00 

2048 

add $83.00 

Code 3: Index 

L 

No Index 


Code 2 is 0512, 

1024 or 2048 



G Gated 

Differential 

Index 

L 

n/c 

Z add $52.00 

G add $208.00 






J04 5/8" bore B Conduit box L 5-15V in, 5-15V C Standard Cover 

J05 

J06 

7/8" bore 

1.00" bore 



Line Driver (4428) out E Extra heavy duty 

steel cover 

J07 1-1/8" bore 1/2” NPT H Same as L with F Flat Thru-hole cover 


K09 1-3/8" bore E 3” extended height 

S Double 56 C-Face 

100°C 

K10 1-1/2" bore Latching Industrial 

Sandwich Adapter 

Connector with V 5-26V in, 5-26V T Flat No Hole Cover 

K11 1-5/8" bore 

1/2” NPT 


K12 1-3/4" bore 

out 

M 10 pin MS 

K13 1-7/8" bore 

5 5-15V in, 5V 

Connector 

K14 2.00" bore 



K15 2-1/8" bore 

K16 2-1/4" bore Q Latching Industrial 

Connector on 

K17 2-3/8" bore 

Differential, 

18” pigtail cable bidirectional signals 

K18 2-1/2" bore 

(A, — A, B, — B) 

K19 2-7/8" bore Available when Code 

4 is J04 thru J07: 



S 18” pigtail cable 

with stainless 

Up to 3.75" 

steel housing 

Maximum 



K09 thru K19 

add $83.00 

Not Listed 

add $111.00 

B add $35.00 

C add $78.00 

E add $130.00 

M add $68.00 

P 

n/c 

Q add $146.00 

S add $1872.00 

L 

n/c 

H add $104.00 

V add $78.00 

5 add $52.00 

C 

n/c 

E add $47.00 

F add $57.00 

S add $94.00 

T add $57.00 


† 





77



SLIM Tach SL56 - Dual Output 





Code 1: Model 

D5 

D5 Motor 

Mount 

Ring, for 

4 1/2" 

C-Face 

Motors 

(56C) 

Dual 

Output 

D5 

Base 

Price 

$1,330.00 

Code 2: PPR 

0064 

0128 

0256 

0512 

1024 

0064 thru 1024 

n/c 

2048 

add $166.00 

Code 3: Index 

L 

No Index 


Code 2 is 0512, 

1024 or 2048 



G Gated 

Differential 

Index 

L 

n/c 

Z add $104.00 

G add $260.00 






J04 5/8" bore B Conduit box L 5-15V in, 5-15V C Standard Cover 

J05 

J06 

7/8" bore 

1.00" bore 



Line Driver (4428) out E Extra heavy duty 

steel cover 

J07 1-1/8" bore 1/2” NPT H Same as L with F Flat Thru-hole cover 


K09 1-3/8" bore E 3” extended height 

S Double 56 C-Face 

100°C 

K10 1-1/2" bore 

Latching Industrial 

Sandwich Adapter 

Connector with V 5-26V in, 5-26V T Flat No Hole Cover 

K11 1-5/8" bore 

1/2” NPT 


K12 1-3/4" bore 

out 

M 10 pin MS 

K13 1-7/8" bore 

5 5-15V in, 5V 

Connector 

K14 2.00" bore 



K15 2-1/8" bore 


Connector on 

K17 2-3/8" bore 

Differential, 

18” pigtail cable bidirectional signals 

K18 2-1/2" bore 

(A, — A, B, — B) 

K19 2-7/8" bore 



Up to 3.75" 

Maximum 



K09 thru K19 

add $83.00 

Not Listed 

add $111.00 

B add $35.00 

C add $156.00 

E add $260.00 

M add $135.00 

P 

n/c 

Q add $291.00 

L 

n/c 

H add $208.00 

V add $156.00 

5 add $104.00 

C 

n/c 

E add $47.00 

F add $57.00 

S add $94.00 

T add $57.00 


† 




78 




SLIM Tach SL85 - Single Output 





Code 1: Model 

S8 

S8 Motor 

Mount 

Ring, for 

8 1/2" 

C-Face 

Motors 

(180C) 

Single 

Output 

S8 

Code 2: PPR 

0064 

0128 

0256 

0512 

1024 

2048 


Price 

n/c 

$1,006.00 

2048 

add $83.00 

Code 3: Index 

L 

No Index 


Code 2 is 0512, 

1024 or 2048 



G Gated 

Differential 

Index 

L 

n/c 

Z add $52.00 

G add $208.00 







J05 7/8" bore 


1/2” NPT 

J06 1.00" bore 



K09 1-3/8" bore 


K10 1-1/2" bore 


K11 1-5/8" bore 


K12 

K13 

K14 

K15 

K16 

1-3/4" bore 

1-7/8" bore 

2.00" bore 

2-1/8" bore 

2-1/4" bore 

E 3” extended height 



1/2” NPT 

M 10 pin MS 

out 

5 5-15V in, 5V 


K17 2-3/8" bore 

Connector Differential, 



(A, — A, B, — B) 




Connector on 


Up to 3.75" 

Maximum 

End of Shaft 

Mounting 

N01 1.125" EOS 

N06 2.125" EOS 

N08 2.375" EOS 

N10 2.875" EOS 



K09 thru K19 

add $83.00 

N01 thru N10 

add $83.00 

Not Listed 

add $111.00 

C add $78.00 

D add $144.00 

E add $144.00 

M add $68.00 

P 

n/c 

Q add $146.00 

L 

n/c 

H add $104.00 

V add $78.00 

5 add $52.00 

C 

n/c 

F add $57.00 


† 





79





SLIM Tach SL85 - Dual Output DC= NM; RC = N 


Code 1: Model 

D8 

D8 Motor 

Mount 

Ring, for 

8 1/2" 

C-Face 

Motors 

(180C) 

Dual 

Output 

D8 

Code 2: PPR 

0064 

0128 

0256 

0512 

1024 


Price 

n/c 

$1,647.00 

2048 

add $166.00 

Code 3: Index 

L 

No Index 


Code 2 is 0512, 

1024 or 2048 



G Gated 

Differential 

Index 

L 

n/c 

Z add $104.00 

G add $260.00 







J05 7/8" bore 


1/2” NPT 

J06 1.00" bore 



K09 1-3/8" bore 


K10 1-1/2" bore 


K11 1-5/8" bore 


K12 

K13 

K14 

K15 

K16 

1-3/4" bore 

1-7/8" bore 

2.00" bore 

2-1/8" bore 

2-1/4" bore 

E 3” extended height 



1/2” NPT 

M 10 pin MS 

out 

5 5-15V in, 5V 


K17 2-3/8" bore 

Connector Differential, 



(A, — A, B, — B) 




Connector on 


Up to 3.75" 

Maximum 

End of Shaft 

Mounting 

N01 1.125" EOS 

N06 2.125" EOS 

N08 2.375" EOS 

N10 2.875" EOS 



K09 thru K19 

add $83.00 

N01 thru N10 

add $83.00 

Not Listed 

add $111.00 

C add $312.00 

D add $287.00 

E add $478.00 

M add $270.00 

P 

n/c 

Q add $541.00 

L 

n/c 

H add $208.00 

V add $156.00 

5 add $104.00 

C 

n/c 

F add $57.00 


† 




80 




NexGen RIM Tach 1250 

Code 1: Model 

RT1 

RT1 

RIMTach 1250 

Direct Motor 

Mounting on 

NEMA 12.5" 

Flange 

Code 2: PPR 

0060 

0064 

0075 

0120 

0128 

0150 

0240 

0256 

0300 

0480 

0512 

0600 

0960 

1024 

1200 

1920 

2048 

2400 

Code 3: Index 

L 

Z 

No Index 

With Index 


Code 4: Shaft Size 


V04 0.625" 

V05 0.875" 

V06 1.000" 

V07 1.125" 

V08 1.250" 

V09 1.375" 

V10 1.500' 

V11 1.625" 

V12 1.750" 

Additional shaft sizes available, 

consult factory. 

End Of Shaft Mounting for GE and 

Similar Motors Available. 


V13 1.875" 

V14 2.000" 

V15 2.125" 

V16 2.250" 

V17 2.375" 

V18 2.500" 

V19 2.875" 

V20 2.625" 

Code 5: Electrical Output 

1 One sensor module 

5-26VDC Line driver 

output 

2 Two sensor modules 

5-26VDC Line Driver 

Output 



Connector with 1/2" NPT 


P 18" Pigtail Cable 

Q Latching industrial 

connector on 18" cable 


RT1 


Price 

$2,688.00 

n/c 

L n/c 

Z add $125 

V04 thru V20 n/c 1 n/c 

2 add $504 

C n/c 

M n/c 

P n/c 

Q add $146 

† 





81



RIM Tach 1250 





Code 1: Model 

R1 

Code 2: PPR 

Code 3: Index 





R1 Motor 

Mount 

Ring, for 

12-1/2" 

C-Face 

Motors 

0060 

0064 

0075 

0120 

0128 

0150 

0240 

0256 

0300 

0480 

0512 

0600 

0960 

1024 

1200 

2048 

L 

No Index 


Code 2 is 0480, 

0512, 0600, 0960 

1024 or 1200 



G Gated 

Differential 

Index 


J04 

J05 

5/8" bore 

7/8" bore 

1 Single 

2 Dual (Isolated) 

J06 1.00" bore 

Differential, 

J07 1-1/8" bore 

bidirectional 

K09 1-3/8" bore signals 

K10 1-1/2" bore (A, — A, B, — B) 

K11 1-5/8" bore 

K12 1-3/4" bore 

K13 1-7/8" bore 

K14 2" bore 

K15 2-1/8" bore 

K16 2-1/4" bore 

K17 2-3/8" bore 

K18 2-1/2" bore 

K19 2-7/8" bore 



Up to 8.00" 

Maximum 

L 5-15V in, 5-15V 


H Same as L with 

extended temp. to 100°C 

R 15-26V in, 15V 


5 5-15V in, 5V 





P 18" Pigtail 


R1 Base 

Price 

$2,990.00 

0060 thru 0600 

n/c 

960 thru 1200 

add $462.00 

2048 

add $3306.00 

L n/c 

Z add $159.00 

G add $358.00 


K09 thru K19 

add $106.00 

Additional Shaft Sizes 


1 n/c 

2 add $642.00 

H add $529.00 

L 

n/c 

R add $67.00 

5 add $67.00 

C 

M 

P 

n/c 

n/c 

n/c 

† 




82 







Code 1: Model 

RT6 

Code 2: PPR 

Code 3: Index 

Code 4: Shaft 




RT6 Foot 

Mount 

or Close 

Coupled 

Housing 

0060 

0064 

0075 

0120 

0128 

0150 

0240 

0256 

0300 

0480 

0512 

0600 

0960 

1024 

1200 

1920 

2048 

2400 

L 

Z 

No Index 

With 

Index Signal 

Output 

A Single Shaft 

Stainless Steel 5/8" 

B Dual Shaft Stainless 

Steel 5/8" 

S Single Shaft Histrength 

Steel 5/8" 

D Dual Shaft Hi- 

Strength Steel 5/8" 


1 One sensor module 

5-26VDC Line driver 

output 

2 Two sensor modules 

5-26VDC Line Driver 

Output 


Connector 

M 10 pin MS 

Connector 

P 18" Long Pigtail 

Cable 


Connector On 18" Cable 

Blank No Option 

GB Shaft Grounding 

Brush 

(Code 4 must be S ) 


RT6 Base 

Price 

$2,312.00 

0060 thru 2400 

n/c 

L n/c 

Z add $125.00 

A 

n/c 

B add $208.00 

S 

n/c 

D add $109.00 

1 n/c 

2 add $504.00 

C 

n/c 

M 

n/c 

P 

n/c 

Q add $146.00 

Blank n/c 

GB add $286.00 

(Code 4 must be S ) 

† 





83



RIM Tach 6200 





Code 1: Model 

R6 

Code 2: PPR 

Code 3: Index 

Code 4: Shaft 




R6 Foot 

Mount 

or Close 

Coupled 

0060 

0064 

0075 

0120 

0128 

0150 

0240 

0256 

0300 

0480 

0512 

0600 

0960 

1024 

1200 

2048 

L 

No Index 


Code 2 is 0480, 

0512, 0600, 

0960 1024, 

1200 or 2048 



G Gated 

Differential 

Index 

A 

B 

S 

D 


Single, Stainless 1 Single 

Steel 


Double, Stainless 

Steel 

Differential, 

Single, Steel bidirectional 

signals 

Double, Steel 

(A, — A, B, — B) 

L 5-15V in, 5-15V 


out 

R 15-26V in, 15V 


5 5-15V in, 5V 





P 18" Pigtail 


R6 Base 

Price 

$2,563.00 

0060 thru 0600 

n/c 

960 thru 1200 

add $463.00 

2048 

add $661.00 

L n/c 

Z add $159.00 

G add $358.00 

A add $139.00 

B add $265.00 

S 

n/c 

D add $139.00 

1 n/c 

2 add $642.00 

L 

n/c 

R add $67.00 

5 add $67.00 

C 

M 

P 

n/c 

n/c 

n/c 

† 




84 







Code 1: Model 

RT8 

Code 2: PPR 

Code 3: Index 


Code 5: Electrical Output 


RT8 RIMTach 

8500 

Heavy 

Duty 

Encoder 

0060 

0064 

0075 

0120 

0128 

0150 

0240 

0256 

0300 

0480 

0512 

0600 

0960 

1024 

1200 

1920 

2048 

2400 

L 

Z 

No Index 

With Index 


V04 5/8" 

V05 7/8" 

V06 1.00" 

V07 1-1/8" 

V09 1-3/8" 

V10 1-1/2" 

V11 1-5/8" 

V12 1-3/4" 

V13 1-7/8" 

V14 2.00" 

V15 2-1/8" 

V16 2-1/4" 

V17 2-3/8" 

V18 2-1/2" 

V19 2-7/8" 

V20 2-5/8" 

Additional shaft sizes available, 

consult factory 

End Of Shaft 

F01 1-1/8" EOS 

F06 2-1/8" EOS 

F08 2-3/8" EOS 

F10 2-7/8" EOS 

F44 4400 Series Motors 




1 5-26VDC in, 

5-26VDC Line Driver out 

(IC-WE), Single output 

2 5-26VDC in, 

5-26VDC Line Driver out 

(IC-WE), Dual output 


Connector with 1/2" 

NPT 

M 10 pin MS 

Connector 

P 18" Pigtail (Not 

available with 

Alarm output) 

Q Latching industrial 

connector on 18" 

cable 


RT8 Base 

Price 

$2042.00 

0060 thru 2400 

n/c 

L n/c 

Z add $125.00 

V04 thru V19 

n/c 

F1 thru F10, and F60 add $26.00 

F44, F47, F68 add $109.00 

Additional Sizes Consult Factory 

1 n/c 

2 add $504.00 

C 

n/c 

M 

n/c 

P 

n/c 

Q add $146.00 

† 





85



RIM Tach 8500 

Code 1: Model 

R8 

R8 Motor 

Mount 

Ring, for 

Nema 8 

1/2" C- 

Face 

Motors 

(180C) 

Code 2: PPR 

0060 

0064 

0075 

0120 

0128 

0150 

0240 

0256 

0300 

0480 

0512 

0600 

0960 

1024 

1200 

Code 3: Index 

L 

No Index 


Code 2 is 0480, 

0512, 0600, 0960 

1024 or 1200 

Z 

G 

Differential 


Gated 

Differential 

Index 







J04 

J05 

5/8" bore 

7/8" bore 

1 Single 


J06 1.00" bore 

Differential, 

J07 1-1/8" bore 

bidirectional 

K09 1-3/8" bore signals 

K10 1-1/2" bore (A, — A, B, — B) 

K11 1-5/8" bore 

K12 1-3/4" bore 

K13 1-7/8" bore 

K14 2" bore 

K15 2-1/8" bore 

K16 2-1/4" bore 

K17 2-3/8" bore 

K18 2-1/2" bore 

K19 2-7/8" bore 



Up to 3.75" 

Maximum 

End of Shaft 

Mounting 

E01 1.125" EOS 

E06 2.125" EOS 

E08 2.375" EOS 

E10 2.875" EOS 



L 5-15V in, 5-15V 


H Same as L with 

extended temp. to 100°C 

R 15-26V in, 15V 


5 5-15V in, 5V 






P 18" Pigtail 


R8 Base 

Price 

$2,231.00 

0064 thru 0600 

n/c 

960 thru 1200 

add $483.00 

L n/c 

Z add $166.00 

G add $373.00 


K09 thru K19 

add $110.00 

E01 thru E10 

add $35.00 

Additional Sizes 


1 n/c 

2 add $669.00 

L 

n/c 

H add $656.00 

R add $69.00 

5 add $69.00 

C 

M 

P 

n/c 

n/c 

n/c 

† 




86 




RIM Tach HS85 DC= NM; RC = N † Lead Time (Days) = 30 Encoder Catalog 

Code 1: Model 

H8 

Code 2: PPR 

Code 3: Index 






H8 Hollow 

Shaft 

0060 

0064 

0075 

0120 

0128 

0150 

0240 

0256 

0300 

0480 

0512 

0600 

0960 

1024 

1200 

2048 

L 

No Index 


Code 2 is 0480, 

0512, 0600, 0960 

1024 or 1200 



G Gated 

Differential 

Index 

Thru-bores 

T01 1-1/8" bore 

T02 1-3/8" bore 

T03 1-5/8" bore 

T04 1-7/8" bore 

T05 2.00" bore 

T06 2-1/8" bore 

T07 2-1/4" bore 

T08 2-3/8" bore 

T09 2-1/2" bore 

T10 2-7/8" bore 

1 Single 


Differential, 

bidirectional 

signals 

(A, — A, B, — B) 

L 5-15V in, 5-15V 


out; standard 

temp. range 

R 15-26V in, 15V 

Line Driver 

(4428) out 

5 5-15V in, 5V 

Line Driver 

(4428) out 




P 18" Pigtail 

Bores with 1.25" per 

foot taper 

P01 1-1/8" bore 

P02 1-3/8" bore 

P03 1-5/8" bore 

P04 1-7/8" bore 

P05 2.00" bore 

P06 2-1/8" bore 

P07 2-1/4" bore 

P08 2-3/8" bore 

P09 2-1/2" bore 

P10 2-7/8" bore 

H 5-15V in, 5-15V 


out; high temp. 

range 10°C to 

100°C 

Additional Shaft Sizes 

Up to 4.50" Maximum 

Available (thru and 

taper shaft) 

Call factory for details 


H8 Base 

Price 

$3,357.00 

0060 thru 0600 

n/c 

960 thru 1200 

add $628.00 

2048 

add $837.00 

L n/c 

Z add $144.00 

G add $323.00 

T01 thru T04 n/c 

T05 thru T10 

add $1794.00 

P01 thru P04 

add $179.00 

P05 thru P10 

add $1973.00 

1 n/c 

2 add $706.00 

L 

n/c 

R add $60.00 

5 add $60.00 

H add $478.00 

C 

M 

P 

n/c 

n/c 

n/c 

† 





87



Series HDP18 DC = NI; RC = N Lead Time = 14 

Code 1: Model 

HDP18 

HDP18T 

Threaded Body 

HDP18T 

Base Price 

$352.00 

Code 2: PPR 

0256 

n/c 


Code 4: Connection 


0 Single Ended 1 5 pin M12 on pigtail 

A,B,Z Pushpull 

(7272) 

2 5 conductor cable 


(code 4 must = 1 

or 2) 

P PWM 10-bit 

absolute 

output w/ 

Single ended 

A,B,Z Pushpull 

(7272) 

(code 4 must = 

7) 

0 n/c 

P n/c 


1 add $75.00 

2 add $64.00 

7 n/c 

Code 5: Target Magnet 

0 No magnet, customer 

supplied 

1 Dual magnet w/Nylon bolt, 

1/4-20 

2 Dual magnet w/Aluminum 

bolt, 1/4-20 

3 Dual magnet nylon collar, 

1/2" bore 


3/4" bore 


1" bore 


1-1/2" bore 

R Ring magnet w/knurled 

aluminum bolt,1/4-20 

0 n/c 

1 add $16.00 

2 add $16.00 

3 add $24.00 

4 add $28.00 

5 add $32.00 

6 add $41.00 

R add $16.00 

† 




88 




Series HDP30 DC = NI; RC = N Lead Time = 14 

Code 1: Model 

HDP30 

HDP30T 

Threaded Body 

HDP30T 

Base Price 

$407.00 

Code 2: PPR 

0008 

0010 

0016 

0020 

0025 

0032 

0040 

0050 

0064 

0080 

n/c 

0100 

0125 

0128 

0200 

0250 

0256 

0400 

0500 

0512 

Code 3 Must 

be J or P 

ABSO 



0 Single Ended A,B,Z Push-pull (7272) 

(Code 4 must = 0,1,2, or 3) 

1 Differential line Driver A,B,Z (7272) 

(Code 4 must = 4, 5, or 6) 

Code 2 must = ABSO and Code 4 must = 0 or 2 

J CANBus J1939 Protocol 

P PWM 10-bit absolute output 

0 n/c 

1 add $10 

J add $107 

P add $43 



0 5 pin M12 

1 5 pin M12 on pigtail 


4 8 pin M12 



0 n/c 

1 add $85 

2 add $64 

4 add $10 

5 add $97 

6 add $75 



supplied 


1/4-20 


bolt, 1/4-20 


1/2" bore 


3/4" bore 


1" bore 


1-1/2" bore 


5/8" bore 

R Ring magnet w/knurled 

aluminum bolt,1/4-20 

0 n/c 

1 add $16.00 

2 add $16.00 

3 add $24.00 

4 add $28.00 

5 add $32.00 

6 add $41.00 

8 add $26.00 

R add $16.00 

† 





89



Series HDN58 DC = NI; RC = N Lead Time = 14 

Code 1: Model 

HDN58 

HDN58 

Code 2: PPR 

0008 

0010 

0016 

0020 

0025 

0032 

0040 

0050 

0064 

0080 

0100 

0125 

0128 

0200 

0250 

0256 

0400 

0500 

0512 

ABSO 



0 Single Ended A,B,Z Push-pull (7272) 

(Code 4 must =0,1,2, or 3) 

1 Differential line Driver A,B,Z (7272) 

(Code 4 must =4,5, or 6) 

2 13 bit-Absolute 0-5VDC 

(code 2 must = ABSO and code 4 must = 3) 

J CANbus J1939 Protocol 

(code 2 must = ABSO and code 4 must = 0) 


0 5 pin M12 



3 5 pin terminal strip 

4 8 pin M12 





supplied 


1/4-20 


bolt, 1/4-20 


1/2" bore 


3/4" bore 


1" bore 


1-1/2" bore 

HDN58 

Base Price 

$330.00 

n/c 

0 n/c 

1 add $22 

2 add $85 

J add $107 


0 add $10 

1 add $97 

2 add $75 

3 n/c 

4 add $10 

5 add $97 

6 add $75 

0 n/c 

1 add $16.00 

2 add $16.00 

3 add $24.00 

4 add $28.00 

5 add $32.00 

6 add $41.00 

† 




90 



DC= NM RC= N 

Lead Time= 3 days 

Model US$ List Model US$ List 

Number Description Price Number Description Price 

106-764 Spare Mating Connector 143.00 

108594-0010 6 Pin MS, Cable Assy. For Single Ended Outputs 77.00 

108595-0010 7 Pin MS, Cable Assy. For Single Ended Outputs 77.00 

108596-0010 7 Pin MS, Cable Assy. For Diff Line Driver w/o Index Out 77.00 

109209-0010 NEMA4 10 pin MS, Cable Assy. Diff line driver w/index out 142.00 

109473-0001 Stamped Tether kit, 3/8" bolt on 5.88" circle 34.00 

109473-0002 Stamped Tether kit, 1/2"bolt on 7.25" circle 34.00 

109473-0003 Slotted Tether kit for bolt on 2.5"to 4.0" radius) 44.00 

110533-0001 Cover Kit, 56C face 77.00 

110533-0002 Cover Kit, fan cover 77.00 

110533-0003 Dual Cover Kit, 56C face 77.00 

110533-0004 Dual Cover Kit, fan cover 77.00 

112121-0001 Spare Hub Clamp (Bore size Code 3:0 -9) 40.00 

112121-0002 Spare Hub Clamp (Bore size Code 3:A -H) 40.00 

112859-0015 5 Pin M12, Cable Assy. For Single Ended Outputs 52.00 

112860-0015 8 Pin M12, Cable Assy. 86.00 

113310-0001 Bore Insert Kit 458.00 

113764-0001 Single point tether kit 50.00 

113766-0001 Slotted tether kit 50.00 

114573-0001 Tether kit, 4.5" C-face, HS35R 50.00 

114574-0001 Tether kit, Slotted, HS35R 50.00 

114575-0001 Tether kit, 8.5" C-face, HS35R 50.00 

114591-0001 Cover Kit, 56-C face, HS35R 74.00 

114592-0001 Cover Kit, Fan shroud, HS35R 74.00 

114593-0001 Dual Cover Kit, 56-C face, HS35R 74.00 

114594-0001 Dual Cover Kit, fan shroud, HS35R 74.00 

114619-0001 Single Point Tether Kit for 4-1/2” C-Face 50.00 

114620-0001 Slotted Tether Kit 50.00 

114621-0001 Single Point Tether Kit for 8-1/2” C-Face 50.00 

114622-0001 Cover Kit, 56C-face, Single/Dual 79.00 

114623-0001 Cover Kit, Fan Cover, Single/Dual 91.00 

114928-0001 Dual Cover Kit, 180C-face 89.00 

1400635-0010 Cable assembly; 10 wires; 10' length 142.00 

1400635-XXXX Cable assembly; 10 wires; custom length CF 

756-042-01 Rod tether kit ,standard 37.00 

756-043-01 Rod tether kit ,56C 37.00 

756-044-01 Rod tether kit ,180C 37.00 

NS0060LJ04 PLSE WHL ASSY 60- J04 0.625" 511.00 




NS0480ZE01 PLSE WHL ASSY 480Z E01 (ES) 1.125" 647.00 




NS0480ZJ04 PLSE WHL ASSY 480Z J04 0.625" 511.00 




NS0480ZK09 PLSE WHL ASSY 480Z K09 1.375" 531.00 













NS0480ZK26 PLSE WHL ASSY 480Z K26 70MM 531.00 




NS0480ZK35 PLSE WHL ASSY 480Z K35 38.02MM 531.00 











NS0512LJ25 PLSE WHL ASSY 512- J25 90MM 511.00 



NS0512LK09 PLSE WHL ASSY 512- K09 1.375" 531.00 

NS0512LK10 PLSE WHL ASSY 512- K10 1.500 531.00 

NS0512LK11 PLSE WHL ASSY 512 -K11 1.625" 531.00 

NS0512LK12 PLSE WHL ASSY 512 -K12 1.750 531.00 










NS0512LK26 PLSE WHL ASSY 512- K26 70MM 531.00 




NS0512LK35 PLSE WHL ASSY 512- K35 38.0MM 531.00 





NS0512LN01 PLSE WHL ASSY 512- N01 (ES) 1.125" 531.00 






† 





91


DC= NM RC= N 

















NS0512ZJ25 PLSE WHL ASSY 512Z J25 90MM 511.00 












































NS0512ZN01 PLSE WHL ASSY 512Z N01 (ES) 1.125" 531.00 



















































† 




92 



DC= NM RC= N 














































NS1024LK47 PLSE WHL ASSY 1024- K47 531.00 


































































† 





93


DC= NM RC= N 









NS1024ZT16 PLSE WHL ASSY 1024Z T16 3.625" 821.00 







































































































† 




94 



DC= NM RC= N 


















NSH5C SLIM HS56 10 PIN EPIC CONNECTOR 131.00 

NSH80060LHC RIMTACH HS85 SENSOR MOD 60HT 1067.00 

NSH80060LLC RIMTACH HS85 SENSOR MOD 60 976.00 


NSH80064LRC RIMTACH HS85 SENSOR 24/15 64 976.00 











NSH80480ZLC RIMTACH HS85 SENSOR MOD 480Z 976.00 






NSH80960 LHC RIMTACH HS85 SENSOR MOD 960 HT 1336.00 








NSH81200ZHC RIMTACH HS85 SENSOR MOD 1200ZHT 1336.00 



NSR10060LHC RIMTACH 1250 SENSOR MOD 60HT 1180.00 

NSR10060LLC RIMTACH 1250 SENSOR MOD 60 1079.00 


NSR10064LRC RIMTACH 1250 SENSOR 24/15 64 1079.00 











NSR10480ZLC RIMTACH 1250 SENSOR MOD 480Z 1079.00 






NSR10960 LHC RIMTACH 1250 SENSOR MOD 960 HT 1478.00 








NSR11200ZHC RIMTACH 1250 SENSOR MOD 1200ZHT 1478.00 


































† 





95


DC= NM RC= N 


































NSR8C RIMTACH 8500 10 PIN CONNECTOR 173.00 

NSS1C SLIM SL1250 10 PIN EPIC CONNECTOR 131.00 

NSS6C SLIM RL67 10 PIN EPIC CONNECTOR 138.00 

NSS8C SLIM SL85 10 PIN EPIC CONNECTOR 138.00 

R675CRELKIT375 RIMTACH 6.75C RELKIT .375 BORE 705.00 

R675CRELKIT625 RIMTACH 6.75C RELKIT .625 BORE 705.00 

R8ADPT4585 RIMTACH 4.5 TO 8.5 ADAPTER 450.00 

R8BRUSH601 RIMTACH GROUND BRUSH, 6000-61 526.00 

R8BRUSH629 RIMTACH GROUND BRUSH, 6200-69 526.00 

R8BRUSH8000 RIMTACH GROUND BRUSH GE 800 423.00 

R8BRUSHB10 RIMTACH GROUND BRUSH-BRSH ONLY 120.00 

R8BRUSHB10H RIMTACH GROUND BRUSH/HOLDER 262.00 

R8BRUSHE01 RIMTACH GROUND BRUSH, E01 423.00 

R8BRUSHE10 RIMTACH GROUND BRUSH, E10-E50 423.00 



R8BRUSHE68 RIMTACH GROUND BRUSH, E68 423.00 

R8BRUSHGEAC1 RIMTACH GROUND BRUSH GE AC 180 423.00 

R8BRUSHSP2 RIMTACH GROUND BRUSH, SP2 MARA 423.00 

R8BRUSHSP3 RIMTACH GROUND BRUSH SP3 RELI 423.00 

R8COVERPP RIMTACH 8500 COVER 62.00 

R8E06SGNDSTD RIMTACH E06 SHAFT GROUNDINGSTD 145.00 

R8E44SGNSTD RIMTACH E44 SHAFT GROUNDINGSTD 145.00 

R8SHIMB10 RIMTACH B10 SPACER WASHER 5PCS 26.00 

R8SHIME01 RIMTACH E01 SPACER WASHER 5PCS 26.00 





R8SHIMSM RIMTACH SENSOR MODULE SHIM 3.00 

R8SIDE COVER RIMTACH 8500 PROBE HOLE COVER 36.00 

R8SPRAYMAG RIMTACH MAG VIEW SPRAY 62.00 

R8SS56C375 RIM .625SSHFT .375BORE 3.55LG 146.00 




R8STUDKIT RIMTACH STUD/ACCORN KIT 4EACH 53.00 

RIM56CRELKIT375 RIMTACH 56C RELKIT .375 BORE 718.00 

RIM56CRELKIT625 RIM 56C RELKIT .625BORE PRE’72 718.00 

RIMB06480 RIM EOS 1.125 BAL250-360 480 964.00 



RIMB08512 RIM EOS 1.125 BAL400TEFC-512 964.00 

RIMB10480 RIM EOS 1.125 BAL500 480 964.00 

RIMB10512 RIM EOS 1.125 BALDOR500 512 964.00 

RIMB10600 RIM EOS 1.125 BAL500 600 964.00 

RIMC02 RIMTACH 8500 TOP ENTRY EPIC CONNECTOR 159.00 

RIMCABLEDB11 RIMTACH CABLE 8C TSP 1 FT 46.00 

RIMCABLEDB110 RIMTACH CABLE 8C TSP 10 FG 114.00 

RIMCABLEDB1100 RIMTACH CABLE 8C TSP 100' 641.00 

RIMCABLEDB11000 RIMTACH CABLE 8C TSP 1000" 5093.00 

RIMCABLEDB1125 RIMTACH CABLE 8C TSP 125' 765.00 




RIMCABLEDB1200 RIMTACH CABLE 8C TSP 200 1135.00 





RIMCABLEDB15 RIMTACH CABLE 8C TSP 1 1/2 FT 76.00 




RIMCABLEDB160 RIMTACH CABLE 8C TSP 60 FG 373.00 




RIMCABLEDB1825 RIMTACH CABLE 8C TSP 825FT 4227.00 


RIMCABLEDB1900 RIMTACH CABLE 8C TSP 900FT 4600.00 

RIME4400CKIT RIMTACH GE4400 C-FACE ADAPTER 799.00 

RIME44480 RIMTACH EOS ADAPTER GE4400 480 1371.00 



RIME44SHAFTEXT RIMTACH 8500 GE4400 SHAFT EXT 475.00 

RIME44SHAFTKIT RIMTACH 8500 GE4400 SHAFT KIT 509.00 


† 




96 



DC= NM RC= N 







RIME47STUBSHAFT RIMTACH 8500 GE4700 SHAFT KIT 509.00 


RIME58600 RIMTACH EOS ADAPTER GE-580 600 1442.00 

RIME58SHAFTKIT RIMTACH 8500 GE585 SHAFT KIT 509.00 








RIME80600 RIMTACH E0S ADAPTERGE8000 600 867.00 

RIMETCABLEMS RIMTACH TESTER CABLE RIM MS 207.00 

RIMETCABLEO RIMTACH TESTER CABLE OPEN 207.00 

RIMETCABLERIM RIMTACH TESTER CABLE,RIM 212.00 

RIMETCABLESL RIMTACH TESTER CABLE,SLIM 212.00 

RIMTESTKIT Complete M100 test kit 2439.00 

RIMETEUROCON RIMTACH TESTER EUROCON 78.00 

RIMFLEX5858 RIMTACH FLEX 0.625X0.625 210.00 

RIMM100MS18 RIMTACH TESTER + MS18-CABLE 2052.00 

RIMM100OPEN RIMTACH TESTER+ OPEN CABLE 2093.00 

RIMM100RC RIMTACH TESTER + RIM CABLE 2093.00 

RIMM100SC RIMTACH TESTER + SLIM CABLE 2093.00 

RIMM110600 RIMTACH TS ADAPTER 110MM 600 1553.00 


RIMM49512 RIMTACH TS ADAPTOR 49MM 512 1262.00 



RIMM60480 RIMM60,480PPR,60MM,TS,DC 1256.00 



RIMM63512 RIMTACH TS ADAPTER 63.525MM512 1017.00 

RIMM64512 RIMTACH TS ADAPTOR 64MM 512 1262.00 



RIMM80512 RIMTACH TS ADAPTER 2.628 512 879.00 

RIMR08600 RIMTACH TS ADAPTER HS2.375 600 1940.00 


RIMR11512HS RIMTACH TS ADAPT HS 3.000 512 1940.00 

RIMR11600 RIMTACH TS ADAPT HS3.000 600 1940.00 


RIMR12600 RIMTACH TS ADAPTER HS 1.875600 1940.00 

RIMR13512HS RIMTACH TS ADAPTER HS1.375 512 1940.00 


RIMR16480 RIMTACH TS ADAPTER HS 2.50 480 1940.00 

RIMR16512 RIMTACH TS ADAPTOR HS 2.50"512 1940.00 

RIMR17512 RIMTACH TS ADAPTER HS 1.125" 1940.00 


RIMR21480 RIMTACH TS ADAPTER HS 3.375 480 1902.00 


RIMRG3600 RIMTACH TS ADAPTER HS3.010 600 1902.00 



RIMSS2 SIGNAL SPLITTER 1:2 5-30V 530.00 

RIMSSW NORTHSTAR SWITCHER 886.00 

RIMT01480 RIMTACH TS ADAPTER 1.125 480 879.00 


















RIMT08480 RIMTACH TS ADAPTER 2.375" 480 879.00 















RIMT17512 RIMTACH TS ADAPTER 3.750" 879.00 














RIMT31600Z RIMTACH TS ADAPTER 2.191 867.00 



† 





97


DC= NM RC= N 
















RIMTB480 RIMTACH TS ADAPTER 0.625 480 879.00 



RIMTC480 RIMTACH TS ADAPTER 0.750 480 879.00 



RIMTD512 RIMTACH TS ADAPTER 0.875 512 879.00 

RIMTE512 RIMTACH TS ADAPTER 1.000" 512 879.00 

RIMTE600 RIMTACH TS ADAPTER 1.000" 600 879.00 

RIMTL101024 RIMTACH TS ADAPTER 180.24 1024 4042.00 







RIMTL211024 RIMTACH TS ADAPTER 2.375" 1024 4127.00 

RIMTL241024 RIMTACH TS ADAPTER 2.125" 1024 4127.00 





RL671024ENCL RL67 1024 TS CN ENCLOSURE 1178.00 

S560180CAP SL56 180C TO 56C ADAPTER KIT 328.00 

S560MODSANDKIT SL56 MOD SAND RING REL 158.00 

S8512.58.5CAP SL85 ADAPTER 12.5-8.5 597.00 

SLIMC01BASE SLIM 10 PIN PANEL 71.00 

SLIMC01CABLE15 SLIM CONNECTOR/CABLE,15' 342.00 

SLIMCABLE100EXT CABLE ASSY 100' FEM-MALE 584.00 

SLIMCO1BHOUSING SLIM 10 PIN BASE HOUSING 71.00 

SLIMQCONNECTOR SLIM-Q BASE MALE AND FEMALE 187.00 

SM11512M30SW MSL115 512 30MM TS SPARE WHEEL 511.00 

W56-1024A WIND56 ENCODER (DC=NI) 1999.00 

† 




98 






Model Number LIST 

ROTARY MODULES Lead time: 10 days DC=DI RC=N 

M602/832 AB -2 S / T 33.00 

M602/832 ABZ -3 S / T 44.00 

ABZ w/COMS -6 T (incl Analog) 50.00 

DICS HUB assy DH602 25.00 

DH832 33.00 

DISC ONLY D602 20.00 

D832 26..00 

ADDERS FOR ENCLOSED UNITS - all Namur Encoders are ATEX 

Lead time for ATEX and Stainless Steel: 20 days 

ATEX Certification 546.00 

Stainless Steel (ss) versions 546.00 

Cable, added length $/ft 2.50 

COM-Tracks 27.00 

Connector (added: E420/426) 33.00 

Interpolate circuits (x12 or x16) 109.00 

Non-standard shaft 55.00 

Redundant electronics - S20 / S25 164.00 

† 





99



Model Number LIST 

LINEAR MODULES Lead time: 10 days DC=DI RC=N 

AB only -2 S / T $33.00 

ABZ -3 S / T $44.00 

ABZ+COMS, Analog -6 S / T $50.00 

SCALE FOR 12 CPMM MODULE: Lead time: 10 days DC=DI RC=N 

113927-0001 Scale, linear encoder $15.00 

12cpmm (Rev.F) 1.5" length (100101) 

SCALE FOR 25 CPMM MODULE: Lead time: 10 days DC=DI RC=N 

113930-0001 Scale, mylar linear, 12.5 CPMM, 0.01 res, 3.25" length (100101-11) $25.00 

113716-0001 mylar linear 12.5CPMM, 600 mm length (100101-13) $121.00 

cut to length Scale, mylar linear 12.5CPMM, =/< 3in $20.00 

cut to length 4 in / 100 mm $25.00 



CUT-TO-LENGTH 

PRICE GUIDE 


cut to length 12in / 305 mm $75.00 

cut to length 450-500 mm $97.00 

SCALE FOR 720 CPI MODULE: Lead time: 10 days DC=DI RC=N 

113931-0001 Mylar linear 360 CPI, 0.75" data length (100101-16) $25.00 

113933-0001 Mylar linear, 360 CPI, 1.00" length (100101-20) $25.00 


113717-0001 Mylar linear 360 CPI, 1.7" length (100101-14) $27.00 



113718-0001 Mylar linear 360 CPI, 4.803" length (100101-18) $37.00 

SCALE FOR 250 CPI ANALOG MODULE: Lead time: 10 days DC=DI RC=N 

113932-0001 Mylar analog linear 250 CPI, 1.25" length (100101-19) $25.00 

NRE - CHARGE TO PRODUCE NEW SCALE MASTER(S) 

$500 - $1000 at short lengths (Photo Solutions) 

† 




100 


Terms & Conditions 

of Sale 

1. GENERAL 

Danaher Industrial Controls, and the Veeder-Root, Dynapar, Northstar, 

Hengstler, Harowe and Eagle Signal product brands are hereinafter referred to as 

“the Company.” All sales of the Company are subject to the following terms and 

conditions. Any order that contains terms and conditions in addition to or 

inconsistent with the following shall not be binding upon the Company unless 

acceptance thereof is made in writing by an authorized representative of the 

Company, and failure of the Company to object to provisions contained in any 

purchase order or other communication from Buyer shall not be construed as a 

waiver of these conditions nor an acceptance of any such provisions. 

Specific quotations showing definite quantities must be made for each order and 

are subject to immediate acceptance. 

No orders for products of the Company shall be binding upon the Company until 

accepted in writing by an authorized representative of the Company. 

The right is reserved to correct clerical and stenographic errors at any time. 

The Company will comply with all applicable federal, state and local laws. 

Without limiting the generality of the foregoing, the Company represents that the 

products to be furnished or the services rendered hereunder were or will be 

produced or performed in compliance with all applicable requirements of Sections 

6, 7, and 12 of the Fair Labor Standards Act of 1938, as amended, and of all valid 

and applicable regulations and orders of the Administrator of the Wage and Hour 

Division issued under Section 14 thereof. 

2. DYNAPAR TWO YEAR WARRANTY 

Dynapar, ACURO, Hengstler, Harowe and NorthStar standard products 

manufactured by the Company are warranted to be free from defects in workmanship 

and material for a period of one year from the date of shipment, and products 

which are defective in workmanship or material will be repaired or replaced at the 

option of the Company, at no charge to the Buyer. Heavy Duty product manufactured 

by the Company (defined as Dynapar H56, R56 & R85; Northstar RIMTach 

and SLIMTach) are warranted to be free from defects in workmanship and material 

for a period of two years from the date of shipment, and products which are 

defective in workmanship or material will be repaired or replaced at the option of the 

Company, at no charge to the Buyer. Final determination as to whether a product is 

actually defective rests with the Company. The obligation of the Company 

hereunder shall be limited solely to repair and replacement of products that fall 

within the foregoing limitations, and shall be conditioned upon receipt by the 

Company of written notice of any alleged defects, or deficiency promptly after 

discovery, within the warranty period, and in the case of components or units 

purchased by the Company, the obligation of the Company shall not exceed the 

settlement that the Company is able to obtain from the supplier thereof. No 

products shall be returned to the Company without its prior consent. Products 

which the Company consents to have returned shall be shipped F.O.B. the 

Company’s factory. The Company cannot assume responsibility or accept invoices 

for unauthorized repairs to its components, even though defective. The life of the 

products of the Company depends to a large extent upon type of usage thereof, and 

THE COMPANY MAKES NO WARRANTY AS TO FITNESS OF ITS PRODUCTS FOR 

SPECIFIC APPLICATIONS BY THE BUYER NOR AS TO A PERIOD OF SERVICE 

UNLESS THE COMPANY SPECIFICALLY AGREES OTHERWISE IN WRITING AFTER 

THE PROPOSED USAGE HAS BEEN MADE KNOWN TO IT. 

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER 

WARRANTIES EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY 

WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR 

PURPOSE. 

3. MINIMUM BILLING 

Minimum billing for any apparatus or parts sold by the Company shall be $50 

net price. 

4. DELIVERY POINT 

All prices quoted (including repairs, parts, and bases sold separately) are F.O.B. 

the Company’s factory. 

5. PACKING 

All prices listed provide for standard packing for domestic shipment in 

accordance with The Company’s standard specifications. If special packing is 

required for domestic shipment or for export shipment, refer to the factory, or 

nearest District Office for price additions. 

6. PRICE CHANGES 

All prices in the Company’s price book or other printed matter as well as written 

or verbal quotations are subject to change without further notice. 

7. PENALTY CLAUSES 

Contracts or quotations showing penalty clause for failure to meet shipment are 

not acceptable unless specifically approved in writing by an officer of the Company. 

8. PRODUCT CHANGES 

Changes in design and improvements in manufacture are constantly being made 

by the Company. These changes and improvements are being made whenever the 

Company believes the product will be improved. No obligation to incorporate these 

changes in units manufactured prior to the change will be assumed. 

9. CANCELLATION 

Cancellation of any item on an order to the Company will be accepted only on the 

following basis. 

Any items which upon receipt by the company of a written notice of cancellation 

are within thirty calendar days of completion, are to be completed and paid for by 

the Buyer in full under the regular terms and conditions of billing. Failure to 

complete such items within thirty calendar days, unless otherwise agreed upon shall 

be prima facie evidence that such items were not within thirty calendar days of 

completion. All items for which materials have been purchased but on which no 

actual production has been started will be cancelled on the basis of actual cost of 

materials purchased, plus 12% on the total of such cost and expenses. 

All items already entered for production and on which cancellation is requested, and 

which are not within thirty calendar days of completion, shall be paid for on the basis 

of actual cost of labor, materials and supplies applied to the production of such items 

plus proper overhead expenses determined in accordance with good accounting 

practice, plus 12% of the total cost and expenses, provided that such cost and 

expense, plus 12% shall in no case exceed 90% of the quoted price of such items. In 

the event of cancellation of incomplete equipment, the Company figures shall be 

accepted as final and conclusive and disposition of the material cancelled shall be given 

to the Company within thirty calendar days from date of notice to Buyer of the cost of 

cancellation. Failure to give the Company final disposition of cancelled material within 

said thirty calendar days shall constitute Buyer’s agreement that the Company may 

dispose of the cancelled material as it sees fit without further credit to buyer or 

obligation of any nature by the Company. 

10. DELAY 

Delay in delivery of any installment shall not relieve Buyer of his obligations to 

accept remaining deliveries. The Company shall not be liable for damage as a result of 

any delay due to any cause beyond the Company’s reasonable control including, 

without limitation, act of God, act of war, riot and delay in transportation or inability to 

obtain necessary labor, materials, or manufacturing facilities. In the event of any such 

delay, the date of delivery shall be extended for a period equal to the time lost by 

reason of the delay. 

11. TAXES AND OTHER CHARGES 

Any manufacturer’s tax, retailer’s occupation tax, use tax, sales tax, excise tax, duty, 

custom inspection or testing fee or any other tax, fee or charge of any nature 

whatsoever imposed by any governmental authority, on or measured by any 

transaction between the Company and the Buyer, shall be paid by the Buyer in addition 

to the prices quoted or invoiced. In the event the Company shall be required to pay any 

back tax, fee, or charge, the Buyer shall reimburse the Company therefore or in lieu of 

such payment, the Buyer shall provide the Company at the time the order is submitted 

with an exemption certificate or other document acceptable to the authority imposing 

the same. 

12. PAYMENTS 

Standard terms of credit are net 30 days providing satisfactory credit is established 

with the Company. 

A 1-1/2% monthly service charge (18% annually) will be added to all accounts not 

paid within 30 days from date of invoice. 

If in the judgement of the Company the financial condition of the Buyer at any time 

does not justify continuance of production or shipment on the terms of payment 

originally specified the Company may require full or partial payment in advance and in 

the event of bankruptcy or insolvency of the Buyer or if any proceeding is brought by or 

against the Buyer under the bankruptcy or insolvency laws, the Company shall be 

entitled to cancel any order then outstanding and shall receive reimbursement for its 

cancellation charges. 

Each shipment shall be considered a separate and independent transaction and 

payment therefor, shall be made accordingly. If shipments are delayed by the Buyer, 

payments shall become due on the date when the Company is prepared to make 

shipment. If the work covered by the purchase order is delayed by the Buyer payment 

shall be made on the purchase price and the percentage of completion. Products held 

for the Buyer shall be at the risk and expense of the Buyer unless otherwise agreed 

upon in writing. The Company reserves the right to ship to its order and make 

collection by slight draft with bill of lading attached or on a C.O.D. basis or any other 

terms approved in writing by the Company’s Credit Department. 

13. PATENTS 

The Company shall defend any suit or proceeding brought against Buyer so far as it 

is based on a claim that any Company apparatus, or any part thereof furnished, when 

employed in the manner intended by the Company, constitutes an infringement of any 

patent of the United States, issued on the date hereof, if notified promptly in writing 

and given authority, information and assistance (at the Company’s expense) for the 

defense of same, and the Company shall pay all damages and costs awarded therein 

against Buyer. In case the apparatus or any part thereof is in such suit held to 

constitute infringement and its use, in the manner intended by the Company is 

enjoined, the Company shall, at its own expense, and at its option, either: Procure the 

right to continue using said apparatus or replace same with non-infringing apparatus, 

or modify it so it becomes non-infringing or remove said apparatus and refund the 

purchase price and the transportation and installation costs thereof. 

The foregoing states the entire liability of the Company for patent infringements by 

said apparatus or any part thereof, and in no event shall the Company be liable if the 

infringement is based on the use of the apparatus for a purpose other than that for 

which sold by the Company. As to any product furnished by the Company to the Buyer 

manufactured in accordance with designs proposed, by the Buyer shall indemnify the 

Company against any loss, cost, expense and/or award made against the Company for 

any patent, trademark, or copyright infringements or alleged infringements. 

14. RETURNS 

Before returning material to the company’s factory, a Return Material Authorization 

number must be obtained. Products returned without an R.M.A. number clearly marked 

on the outside of the shipping carton will be refused. Returned products will be subject 

to a 25% restocking Charge. 

15. LIMITATION OF LIABILITY 

In no event shall the Company be liable for consequential or incidental damages or 

for any expense incurred by the Buyer attributed to any product sold hereunder. 

16. FIELD SERVICE REPAIRS 

All repair orders require a purchase order number from the Buyer. Warranty 

repairs, as determined by the Company, and the cost of estimating a repair are billed 

no charge. 

17. CONTROVERSIES 

Venue for all controversies shall be solely in the courts sitting in Chicago, IL. 


C3

• INCREMENTAL 

• ABSOLUTE 

E N C O D E R S 

ACURO TM brand 


NorthStar TM brand 

A division of Danaher, a Fortune 500 company with offices in 30 countries around the world. 

More Available. With factories around the world, global sales and applications support, and an expansive network of 

distributors, we stay close to our customers -shortening lead times and fostering responsiveness. Three-day lead time is 

standard, with same-day shipments available on many of our products. 

More Selection. We have a broad selection of controllers to meet application requirements in a variety of industries. Userconfigurable, 

accurate and flexible, with low, mid, or high level performance ranges, our controller products meet your 

system and budgetary requirements. 

More Reliable. Our experience serving customers in many industries has taught us to design controllers that are reliable 

and durable, with quality standards that meet six sigma requirements. 

For additional information or a full-line catalog, contact Customer Service 

or visit our web site. 

Customer Service: 

Tel.: +1.800.873.8731 

Fax: +1.847.662.4150 

custserv@dynapar.com 

Technical Support 

Tel.: +1.800.234.8731 

Fax: +1.847.662.4150 

dynapar.techsupport@dynapar.com 

northstar.techsupport@dynapar.com 

INNOVATION - CUSTOMIZATION - DELIVERY 

Headquarters: 1675 Delany Road • Gurnee, IL 60031-1282 • USA 

Phone: +1 847.662.2666 • Fax: +1 847.662.4150 

1.800.873.8731 

www.dynapar.com 

© 2012-2013 Dynapar 

Printed in U.S.A. 

2013 Encoder Price List 1/1/2013 # DNPL12013

brand

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?