Brochure in PDF - Pallet racking

Contents
Omega system overview and specifications 4 - 5
Omega systems 6 - 7
Omega multi-position system 8 - 13
Omega single-position system 14 - 17
Omega drive-in and drive-through racking 18 - 21
Standard parts and sizes 22 - 23
System accessories 24 - 27
Specifications
The best possible statics to optimise profile stability: OMEGA standard profile and SIGMA beams or IPG beams
(“I” denotes the shape, “P” denotes profile and “G” denotes Galler).
Welded standard frame constructions for heavy loads with lowest tolerances for automated storage and in racking
silo construction.
Bolted rack designs provide the alternative for standard racking up to a construction height of 12000 mm.
Correctly dimensioned accessories, e.g. corner protector and strips, wire mesh with frames and precision-made
guide rails.
A finishing unit with a cathodic dip coating plant: this finish provides adequate capacity since it measures 12000
(length) by 2200 mm (depth) by 600 mm (width). The OMEGA racking is finished in light grey (RAL 7035) after
a thorough preparatory treatment and final treatment (degreasing, cleaning, activating, zinc phosphate treatment,
dip coating and baking).
Powder coating is offered as an option for customized colouring after pre-treatment
Storage planning design and statics completed by in-house experts.
Competent advice from our sales office staff.
5