standard electrical service requirements - City of Lakeland

More documents

Recommendations

Info

PROCEDURE FOR REVISIONS The rules set forth in this Standard Electrical Service Requirements (SESR) change from time to time due to improved methods of construction, product application, and changes in Safety standards. Lakeland Electric (LE) reserves the right to change or amend its rules, regulations, rates, or other charges, at any time and such changes or amendments, shall become effective upon the date determined by Lakeland Electric. These changes follow a sequence of approval which enables the establishment and enforcement of the requirements. Additionally, routine review of the requirements by Manager of Engineering insures that the information does not become outdated. Proposed revisions are received by the SESR Committee Chairperson, reviewed and studied for viability with input from the originator. If the change is viable it will be passed to the SESR Committee for preliminary approval. A draft will be written and passed to Administration for final approval. If approved, the final draft of the new or revised rule is then copied and distributed with the appropriate cover letter to all Policy Manual holders. The originator will be notified whether the proposal was rejected or passed. EFFECTIVE DATE: JULY 1, 1998 REVISED DATE: SEPTEMBER 2006 4
LAKELAND ELECTRIC SESR POLICY PROCEDURE FOR REVISION FLOWCHART "ORIGINATORS" T&D OPERATIONS ENGINEERING SYSTEM ENGINEERING FIELD SERVICES T&D CONSTRUCTION and MAINTENANCE ELECTRICAL CONTRACTORS PUBLIC SERVICE COMMISSION GOVERNMENTAL INSPECTORS SESR COMMITTEE CHAIRPERSON NON-FEASIBLE FEASIBLE FEEDBACK TO THE ORIGINATOR SESR COMMITTEE REVIEWS REVISIONS FOR FEASIBILITY and PREPARES PRELIMINARY DRAFT ADMINISTRATOR FOR FINAL APPROVAL REJECTED APPROVED FEEDBACK TO THE ORIGINATOR REVISION IS ISSUED FEEDBACK TO THE ORIGINATOR EFFECTIVE DATE: JULY 1, 1998 REVISED DATE: SEPTEMBER 2006 5
Page 1 and 2: STANDARD ELECTRICAL SERVICE REQUIRE
Page 3: INTRODUCTION The City of Lakeland,
Page 7 and 8: DEFINITIONS Account: Any present or
Page 9 and 10: Feeder (distribution): The main tru
Page 11 and 12: Raceway: A mechanical structure for
Page 13 and 14: SECTION 1: GENERAL CUSTOMER INFORMA
Page 15 and 16: FOR AN APPLICATION CONTACT THE COMM
Page 17 and 18: (b) (c) such buildings or locations
Page 19 and 20: (c) (d) (e) Ornamental shrubs or ot
Page 21 and 22: 1.15.2 Discontinuance of Service Wi
Page 23 and 24: SECTION 2.0 GENERAL SERVICE INFORMA
Page 25 and 26: 2.6 Number of Services Provided Lak
Page 27 and 28: Notes: 1. See Paragraph 4.6.2, Serv
Page 29 and 30: Lakeland Electric shall not be held
Page 31 and 32: 2.23.3 Facility Utilization When kW
Page 33 and 34: SECTION 3.0 SECONDARY (O-400V) SERV
Page 35 and 36: Table 3.1 Vertical Clearance per L
Page 37 and 38: SECTION 4.0 SECONDARY (0-600V) SERV
Page 39 and 40: 4.6.2 Services over 200 Amps Lakela
Page 41 and 42: galvanized elbows and pull string.
Page 43 and 44: SECTION 5.0 METERS AND METERING EQU
Page 45 and 46: The raceway shall be one inch galva
Page 47 and 48: If, upon test, any metering equipme
Page 49 and 50: SECTION 6.0 CUSTOMER UTILIZATION EQ
Page 51 and 52: 6.5 Equipment Voltage Rating Lakela
Page 53 and 54: THIS SECTION IS RESERVED FOR FUTURE

standard electrical service requirements - City of Lakeland

Create successful ePaper yourself

Delete template?

Save as template?