Networked Controls Product Catalogue - Philips

Load Controllers – Dimmer Controllers – Open Protocol Dimmer Controllers
DBC1210 – 12 x 10A
Dimmer Controller
The DBC1210 is designed for use
with DALI, 1-10V and DSI electronic
dimmable fl uorescent ballasts and
transformers. The unit has a built-in
12 x 10A relay output, to remove
power once lamps have been
dimmed down, therefore completely
removing stand-by current. Each
of the twelve control outputs are
selectable to DALI Broadcast, 1-10V
and DSI are provided for control of
HF ballasts.
• 400/230V ±14% 50/60Hz 3-Phase Y
at 40A per phase
• 12 x switched outputs at 10A
• 12 x Open protocol control outputs, each
selectable to DALI, 1-10V or DSI
• Each output protected by a 10A MCB
• Dimensions: H 457mm x W 252mm x D 126mm
• Packed weight: 10.25kg
DBC1220GL – 12 x 20A
Dimmer Controller
The DBC1220GL is designed for
use with DALI, 1-10V and DSI
electronic dimmable fl uorescent
ballasts and transformers. The
unit has a built-in 12 x 20A
relay output, to remove power
once lamps have been dimmed
down, therefore completely
removing stand-by current. Each
of the twelve control outputs
are selectable to DALI Broadcast,
1-10V and DSI are provided for
control of HF ballasts.
• 400/230V ±14% 50/60Hz 3-Phase Y at
60A per phase
• 12 x switched outputs at 20A
• 12 x Open protocol control outputs, each
selectable to DALI, 1-10V or DSI
• Each output protected by a 20A MCB
• Dimensions: H 457mm x W 252mm x D 126mm
• Packed weight: 10.25kg
52 Philips Dynalite
The print quality of this copy is not an accurate representation of the original.