Networked Controls Product Catalogue - Philips

More documents

Recommendations

Info

Load Controllers – Multipurpose Controllers DDMC802 – 8 x 2A Multipurpose Modular Controller The DDMC802 is an eight channel controller with a maximum load per channel of 2A. A variety of output modules are available to suit different types of loads and the DDMC802 can accept up to eight plug in modules, which by their removable design also facilitate ease of servicing. Available module types include: • Trailing edge phase control dimmer, suitable for use with most types of dimmable electronic transformers. • Leading edge phase control dimmer, suitable for incandescent lamps and some types of dimmable electronic transformers. • HF Ballast controller, suitable for controlling 1-10V and digital ballasts and transformers (a relay module should be paired with the HF ballast module when controlling 1-10V ballasts). • Relay module, suitable for most types of switched loads. • Fan control module. • Curtain control module. The device is DIN rail mountable, designed to be installed in a switchboard, optionally next to circuit breakers feeding the circuits to be controlled. • 230V ±14% 50/60Hz Single Phase at 16A • 8 x output slots at 2A each • Dimensions: H 93mm x W 211mm x D 75mm • Packed weight: 0.94kg Available output modules include: • 1 x 2A Leading Edge Dimmer module (DDLM102) • 1 x 4A Leading Edge Dimmer module (DDLM104) • 1 x 2A Trailing Edge Dimmer module (DDTM102) • 1 x DALI Broadcast, 1-10V, DSI Controller module (DDBM100) • 1 x 4A Relay Controller module (DDRM104) • 1 x 2A SPDT Curtain Controller module (DDCM102) • 1 x 400VA Fan Controller module (DDFM102) 58 Philips Dynalite The print quality of this copy is not an accurate representation of the original.
DDLE6RC202 – 6 x 2A Leading Edge 2 x 2A Relay Multipurpose Controller The DDLE6RC202 is an eight channel controller with six leading edge dimming outputs and two switched outputs with a maximum load per channel of 2A. It is suitable for use with incandescent, low voltage, neon and selected fl uorescent fi xtures and any small switched load. It is also highly recommended for use in residential and hotel applications. The DDLE6RC202 features Philips Dynalite’s superior voltage regulation and soft start technologies, which protect low voltage lamps and dramatically increase lamp life. The front panel of the DDLE6RC202-MO (Manual Override) version includes a rear lit keypad that provides status indication and local control of individual channels. It also features an LED illuminated service switch for diagnostics and local override. Adjacent to the keypad is a network socket for ease of programming. The device is DIN rail mountable, designed to be installed in a switchboard, optionally next to circuit breakers feeding the circuits to be controlled. Load Controllers DMC810GL – 4 x 10A Leading Edge 4 x 10A Open Protocol Multipurpose Controller The DMC810GL multipurpose controller offers control of both incandescent lamps and electronic dimmable and switched ballasts and transformers. Four 10A circuit breakers protect eight channels rated at 10A each for control of dimmable loads. Four control outputs, selectable to 1-10V DC, DSI and DALI Broadcast, are provided for control of HF ballasts. These control outputs can operate in tandem with, or separately from, the switched outputs. The ability to control mixed load types from the one controller provides savings on initial capital costs, as well as installation. Networked Controls Product Catalogue 59 The print quality of this copy is not an accurate representation of the original.
Page 1 and 2:
Headquarters & All other countries/
Page 3 and 4:
Contents 2 Philips Dynalite 3 End-t
Page 5 and 6:
End-to-End Lighting Philips Dynalit
Page 7 and 8:
Our Global Centre of Competence As
Page 9 and 10: 8 Panels 9 Revolution Series 11 Cla
Page 11 and 12: Revolution Series The Revolution DR
Page 13 and 14: Classic Series The Classic DPN Seri
Page 15 and 16: • Available in button confi gurat
Page 17 and 18: Touchscreens A Philips Dynalite tou
Page 19 and 20: DynamicTouch iPad Apps The DynamicT
Page 21 and 22: DTC602 & DTCE602 - Timer Clock The
Page 23 and 24: Sensors Offering the ability to int
Page 25 and 26: DUS804C - Multifunction Sensor The
Page 27 and 28: DTS900 - Temperature Sensor The DTS
Page 29 and 30: Sensors & Load Controller Kits Netw
Page 31 and 32: DALI Multimaster System Solution Ma
Page 33 and 34: 32 Relay and Multi-use Controllers
Page 35 and 36: DMRC210 Relay Controller The DMRC21
Page 37 and 38: DDRC820FR - 8 x 20A Relay Controlle
Page 39 and 40: DRC1210 - 12 x 10A Relay Controller
Page 41 and 42: Leading Edge Dimmer Controllers Lea
Page 43 and 44: DLE405 - 4 x 5A Leading Edge Dimmer
Page 45 and 46: DLE1210 - 12 x 10A Leading Edge Dim
Page 47 and 48: Trailing Edge Dimmer Controllers Co
Page 49 and 50: Open Protocol Dimmer Controllers Th
Page 51 and 52: DDBC300-DALI Dimmer Controller The
Page 53 and 54: DBC410 - 4 x 10A Dimmer Controller
Page 55 and 56: LED PWM Controllers Capable of dire
Page 57 and 58: DDLEDC605 - 6 x 5A PWM Controller T
Page 59: DDMC802GL - 8 x 2A Multipurpose Mod
Page 63 and 64: Integration Devices The print quali
Page 65 and 66: DAC100BT Ethernet Gateway The Phili
Page 67 and 68: DDNG485 Network Gateway The Philips
Page 69 and 70: DDNI-LON LON Gateway The DDNI-LON i
Page 71 and 72: DIR-TX8 Infra-red Transmitter The D
Page 73 and 74: Envision Software EnvisionProject a
Page 75 and 76: EnvisionProject EnvisionProject pro
Page 77 and 78: Network Devices & Commissioning Too
Page 79 and 80: DyNet 305m Data Cable Pack DyNet da
Page 81 and 82: Philips Dynalite Brochures User Int
show all

Networked Controls Product Catalogue - Philips

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?