27.04.2014 Views

Download design-in guide - Philips

Download design-in guide - Philips

Download design-in guide - Philips

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Each form factor has different dimensions. The dimensions of the same hous<strong>in</strong>g<br />

type can also differ between different power packages. The correct dimensions<br />

can be found <strong>in</strong> the driver datasheet, to be found on<br />

www.philips.com/technology<br />

Nam<strong>in</strong>g of the drivers<br />

I : <strong>in</strong>dependent hous<strong>in</strong>g <strong>design</strong><br />

TE : trail<strong>in</strong>g edge dimm<strong>in</strong>g<br />

TD : Touch & DALI dimm<strong>in</strong>g<br />

/s : small version<br />

SH : square <strong>in</strong>dependent hous<strong>in</strong>g<br />

LH : l<strong>in</strong>ear <strong>in</strong>dependent hous<strong>in</strong>g<br />

Example: Xitanium 17W LH 0.3-1A 24V TD/Is 230V<br />

Xitanium : Brand name for highly efficient and extremely reliable LED drivers<br />

17W : Maximum output power<br />

LH : L<strong>in</strong>ear Hous<strong>in</strong>g<br />

0.3-1A : Output current range<br />

24V : Maximum output voltage<br />

TD : Dimm<strong>in</strong>g protocol (Touch & Dali)<br />

/I : Independent hous<strong>in</strong>g <strong>design</strong><br />

s : Small version<br />

230V : Ma<strong>in</strong>s AC <strong>in</strong>put voltage<br />

Cables<br />

The Xitanium LED drivers feature a specific JST connector that comb<strong>in</strong>es the<br />

power connection to the LEDs with the Rset and NTC features. The driver can<br />

be connected to a <strong>Philips</strong> Fortimo LED DLM or Fortimo LED SLM module via a<br />

<strong>Philips</strong> LED cable that is 250mm <strong>in</strong> length. There are also 600mm versions<br />

available for <strong>in</strong>dependent operation that features also a 12V wire for easy<br />

connection of an active cool<strong>in</strong>g system.<br />

JST connector (driver side) p<strong>in</strong> layout<br />

Connector details: DLM cables<br />

• JST connector on cable to LED driver<br />

- Hous<strong>in</strong>g JST PAP-07V-S<br />

- Contact JST SPHD-001T-PO.5<br />

• JST connector on cable to LED DLM module<br />

- Hous<strong>in</strong>g JST-PHR-7<br />

- Contact JST SPH-002T-PO.5S<br />

Fortimo LED cable for <strong>in</strong>dependent operation<br />

Connector details: SLM cables<br />

• JST connector on cable to LED driver<br />

- Hous<strong>in</strong>g JST PAP-07V-S<br />

- Contact JST SPHD-002T-PO.5<br />

• Tyco connector on cable to LED SLM module<br />

- Hous<strong>in</strong>g Tyco HPI 440146-8<br />

- Contact Tyco HPI 440147-2<br />

Special attention for 75W and 110W Xitanium LED drivers<br />

Due to the higher output voltage (>100 V) of these LED drivers more<br />

creepage/clearance distance is required for safety reasons. The LED driver<br />

output current has therefore been moved from p<strong>in</strong> 2 to p<strong>in</strong> 1.<br />

Design-<strong>in</strong> <strong>guide</strong> <strong>Philips</strong> Xitanium <strong>in</strong>door down and spotlight Fortimo LED drivers<br />

page 8

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!