MATERIAL SAFETY DATA SHEET - OFI Testing Equipment, Inc.
MATERIAL SAFETY DATA SHEET - OFI Testing Equipment, Inc.
MATERIAL SAFETY DATA SHEET - OFI Testing Equipment, Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Sodium Hexametaphosphate Crystals<br />
SECTION 4 FIRST AID MEASURES<br />
Harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with<br />
adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after<br />
handling. Keep container closed.<br />
FIRST AID: SKIN: Wash exposed area with soap and water. If irritation persists, seek<br />
medical attention.<br />
EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally.<br />
Seek Medical Aid. INHALATION: Remove to fresh air. If not breathing, give artificial<br />
respiration. If breathing is difficult, give oxygen<br />
INGESTION: If swallowed, induce vomiting immediately after giving two glasses of<br />
water. Never give anything by mouth to an unconcious person.<br />
SECTION 5 FIRE FIGHTING MEASURES<br />
Fire Extinguisher Type: Any means suitable for extinguishing<br />
surrounding fire<br />
Negligible fire hazard when exposed to<br />
Fire / Explosion Hazards: heat or flame<br />
Fire Fighting Procedure:<br />
SECTION 6 ACCIDENTAL RELEASE MEASURES<br />
Wear self-contained breathing apparatus and protective<br />
clothing to prevent contact with skin and clothing.<br />
Sweep up and place in suitable (fiberboard) containers<br />
for reclamation or later disposal.<br />
Ventilate area of leak or spill. Wear appropriate personal protective<br />
equipment as<br />
specified in Section 8. Spills: Sweep up and containerize for<br />
reclamation or disposal.<br />
Vacuuming or wet sweeping may be used to avoid dust dispersal.<br />
Small amounts of<br />
residue may be flushed to sewer with plenty of water.<br />
SECTION 7 HANDLING AND STORAGE<br />
Store in a cool, dry, well-ventilated place away from<br />
incompatible materials. Wash thoroughly after<br />
handling.<br />
SECTION 8 EXPOSURE CONTROLS/PERSONAL PROTECTION<br />
Respiratory Protection:<br />
Ventilation<br />
Protective Gloves:<br />
Eye Protection:<br />
Other Protective <strong>Equipment</strong>:<br />
Dust or mist respirator<br />
Local<br />
Mechanical<br />
Wear appropriate gloves to prevent skin exposure<br />
Shield<br />
Goggles and Face<br />
Wear appropriate clothing to prevent<br />
skin exposure<br />
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES<br />
Melting Point: 1184 F (640C) Percent Volatile by 0<br />
Boiling Point: Information Evaporation Rate N/A<br />
not available<br />
Vapor Pressure: Information Evaporation Standard<br />
not available<br />
Page 2 of 5